1
0
Fork 0
alistair23-linux/include/acpi/amlcode.h

495 lines
18 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: amlcode.h - Definitions for AML, as included in "definition blocks"
* Declarations and definitions contained herein are derived
* directly from the ACPI specification.
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __AMLCODE_H__
#define __AMLCODE_H__
/* primary opcodes */
#define AML_NULL_CHAR (u16) 0x00
#define AML_ZERO_OP (u16) 0x00
#define AML_ONE_OP (u16) 0x01
#define AML_UNASSIGNED (u16) 0x02
#define AML_ALIAS_OP (u16) 0x06
#define AML_NAME_OP (u16) 0x08
#define AML_BYTE_OP (u16) 0x0a
#define AML_WORD_OP (u16) 0x0b
#define AML_DWORD_OP (u16) 0x0c
#define AML_STRING_OP (u16) 0x0d
#define AML_QWORD_OP (u16) 0x0e /* ACPI 2.0 */
#define AML_SCOPE_OP (u16) 0x10
#define AML_BUFFER_OP (u16) 0x11
#define AML_PACKAGE_OP (u16) 0x12
#define AML_VAR_PACKAGE_OP (u16) 0x13 /* ACPI 2.0 */
#define AML_METHOD_OP (u16) 0x14
#define AML_DUAL_NAME_PREFIX (u16) 0x2e
#define AML_MULTI_NAME_PREFIX_OP (u16) 0x2f
#define AML_NAME_CHAR_SUBSEQ (u16) 0x30
#define AML_NAME_CHAR_FIRST (u16) 0x41
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
#define AML_EXTENDED_OP_PREFIX (u16) 0x5b
#define AML_ROOT_PREFIX (u16) 0x5c
#define AML_PARENT_PREFIX (u16) 0x5e
#define AML_LOCAL_OP (u16) 0x60
#define AML_LOCAL0 (u16) 0x60
#define AML_LOCAL1 (u16) 0x61
#define AML_LOCAL2 (u16) 0x62
#define AML_LOCAL3 (u16) 0x63
#define AML_LOCAL4 (u16) 0x64
#define AML_LOCAL5 (u16) 0x65
#define AML_LOCAL6 (u16) 0x66
#define AML_LOCAL7 (u16) 0x67
#define AML_ARG_OP (u16) 0x68
#define AML_ARG0 (u16) 0x68
#define AML_ARG1 (u16) 0x69
#define AML_ARG2 (u16) 0x6a
#define AML_ARG3 (u16) 0x6b
#define AML_ARG4 (u16) 0x6c
#define AML_ARG5 (u16) 0x6d
#define AML_ARG6 (u16) 0x6e
#define AML_STORE_OP (u16) 0x70
#define AML_REF_OF_OP (u16) 0x71
#define AML_ADD_OP (u16) 0x72
#define AML_CONCAT_OP (u16) 0x73
#define AML_SUBTRACT_OP (u16) 0x74
#define AML_INCREMENT_OP (u16) 0x75
#define AML_DECREMENT_OP (u16) 0x76
#define AML_MULTIPLY_OP (u16) 0x77
#define AML_DIVIDE_OP (u16) 0x78
#define AML_SHIFT_LEFT_OP (u16) 0x79
#define AML_SHIFT_RIGHT_OP (u16) 0x7a
#define AML_BIT_AND_OP (u16) 0x7b
#define AML_BIT_NAND_OP (u16) 0x7c
#define AML_BIT_OR_OP (u16) 0x7d
#define AML_BIT_NOR_OP (u16) 0x7e
#define AML_BIT_XOR_OP (u16) 0x7f
#define AML_BIT_NOT_OP (u16) 0x80
#define AML_FIND_SET_LEFT_BIT_OP (u16) 0x81
#define AML_FIND_SET_RIGHT_BIT_OP (u16) 0x82
#define AML_DEREF_OF_OP (u16) 0x83
#define AML_CONCAT_RES_OP (u16) 0x84 /* ACPI 2.0 */
#define AML_MOD_OP (u16) 0x85 /* ACPI 2.0 */
#define AML_NOTIFY_OP (u16) 0x86
#define AML_SIZE_OF_OP (u16) 0x87
#define AML_INDEX_OP (u16) 0x88
#define AML_MATCH_OP (u16) 0x89
#define AML_CREATE_DWORD_FIELD_OP (u16) 0x8a
#define AML_CREATE_WORD_FIELD_OP (u16) 0x8b
#define AML_CREATE_BYTE_FIELD_OP (u16) 0x8c
#define AML_CREATE_BIT_FIELD_OP (u16) 0x8d
#define AML_TYPE_OP (u16) 0x8e
#define AML_CREATE_QWORD_FIELD_OP (u16) 0x8f /* ACPI 2.0 */
#define AML_LAND_OP (u16) 0x90
#define AML_LOR_OP (u16) 0x91
#define AML_LNOT_OP (u16) 0x92
#define AML_LEQUAL_OP (u16) 0x93
#define AML_LGREATER_OP (u16) 0x94
#define AML_LLESS_OP (u16) 0x95
#define AML_TO_BUFFER_OP (u16) 0x96 /* ACPI 2.0 */
#define AML_TO_DECSTRING_OP (u16) 0x97 /* ACPI 2.0 */
#define AML_TO_HEXSTRING_OP (u16) 0x98 /* ACPI 2.0 */
#define AML_TO_INTEGER_OP (u16) 0x99 /* ACPI 2.0 */
#define AML_TO_STRING_OP (u16) 0x9c /* ACPI 2.0 */
#define AML_COPY_OP (u16) 0x9d /* ACPI 2.0 */
#define AML_MID_OP (u16) 0x9e /* ACPI 2.0 */
#define AML_CONTINUE_OP (u16) 0x9f /* ACPI 2.0 */
#define AML_IF_OP (u16) 0xa0
#define AML_ELSE_OP (u16) 0xa1
#define AML_WHILE_OP (u16) 0xa2
#define AML_NOOP_OP (u16) 0xa3
#define AML_RETURN_OP (u16) 0xa4
#define AML_BREAK_OP (u16) 0xa5
#define AML_BREAK_POINT_OP (u16) 0xcc
#define AML_ONES_OP (u16) 0xff
/* prefixed opcodes */
#define AML_EXTENDED_OPCODE (u16) 0x5b00 /* prefix for 2-byte opcodes */
#define AML_MUTEX_OP (u16) 0x5b01
#define AML_EVENT_OP (u16) 0x5b02
#define AML_SHIFT_RIGHT_BIT_OP (u16) 0x5b10
#define AML_SHIFT_LEFT_BIT_OP (u16) 0x5b11
#define AML_COND_REF_OF_OP (u16) 0x5b12
#define AML_CREATE_FIELD_OP (u16) 0x5b13
#define AML_LOAD_TABLE_OP (u16) 0x5b1f /* ACPI 2.0 */
#define AML_LOAD_OP (u16) 0x5b20
#define AML_STALL_OP (u16) 0x5b21
#define AML_SLEEP_OP (u16) 0x5b22
#define AML_ACQUIRE_OP (u16) 0x5b23
#define AML_SIGNAL_OP (u16) 0x5b24
#define AML_WAIT_OP (u16) 0x5b25
#define AML_RESET_OP (u16) 0x5b26
#define AML_RELEASE_OP (u16) 0x5b27
#define AML_FROM_BCD_OP (u16) 0x5b28
#define AML_TO_BCD_OP (u16) 0x5b29
#define AML_UNLOAD_OP (u16) 0x5b2a
#define AML_REVISION_OP (u16) 0x5b30
#define AML_DEBUG_OP (u16) 0x5b31
#define AML_FATAL_OP (u16) 0x5b32
#define AML_TIMER_OP (u16) 0x5b33 /* ACPI 3.0 */
#define AML_REGION_OP (u16) 0x5b80
#define AML_FIELD_OP (u16) 0x5b81
#define AML_DEVICE_OP (u16) 0x5b82
#define AML_PROCESSOR_OP (u16) 0x5b83
#define AML_POWER_RES_OP (u16) 0x5b84
#define AML_THERMAL_ZONE_OP (u16) 0x5b85
#define AML_INDEX_FIELD_OP (u16) 0x5b86
#define AML_BANK_FIELD_OP (u16) 0x5b87
#define AML_DATA_REGION_OP (u16) 0x5b88 /* ACPI 2.0 */
/*
* Combination opcodes (actually two one-byte opcodes)
* Used by the disassembler and i_aSL compiler
*/
#define AML_LGREATEREQUAL_OP (u16) 0x9295
#define AML_LLESSEQUAL_OP (u16) 0x9294
#define AML_LNOTEQUAL_OP (u16) 0x9293
/*
* Internal opcodes
* Use only "Unknown" AML opcodes, don't attempt to use
* any valid ACPI ASCII values (A-Z, 0-9, '-')
*/
#define AML_INT_NAMEPATH_OP (u16) 0x002d
#define AML_INT_NAMEDFIELD_OP (u16) 0x0030
#define AML_INT_RESERVEDFIELD_OP (u16) 0x0031
#define AML_INT_ACCESSFIELD_OP (u16) 0x0032
#define AML_INT_BYTELIST_OP (u16) 0x0033
#define AML_INT_STATICSTRING_OP (u16) 0x0034
#define AML_INT_METHODCALL_OP (u16) 0x0035
#define AML_INT_RETURN_VALUE_OP (u16) 0x0036
#define AML_INT_EVAL_SUBTREE_OP (u16) 0x0037
#define ARG_NONE 0x0
/*
* Argument types for the AML Parser
* Each field in the arg_types u32 is 5 bits, allowing for a maximum of 6 arguments.
* There can be up to 31 unique argument types
* Zero is reserved as end-of-list indicator
*/
#define ARGP_BYTEDATA 0x01
#define ARGP_BYTELIST 0x02
#define ARGP_CHARLIST 0x03
#define ARGP_DATAOBJ 0x04
#define ARGP_DATAOBJLIST 0x05
#define ARGP_DWORDDATA 0x06
#define ARGP_FIELDLIST 0x07
#define ARGP_NAME 0x08
#define ARGP_NAMESTRING 0x09
#define ARGP_OBJLIST 0x0A
#define ARGP_PKGLENGTH 0x0B
#define ARGP_SUPERNAME 0x0C
#define ARGP_TARGET 0x0D
#define ARGP_TERMARG 0x0E
#define ARGP_TERMLIST 0x0F
#define ARGP_WORDDATA 0x10
#define ARGP_QWORDDATA 0x11
#define ARGP_SIMPLENAME 0x12
/*
* Resolved argument types for the AML Interpreter
* Each field in the arg_types u32 is 5 bits, allowing for a maximum of 6 arguments.
* There can be up to 31 unique argument types (0 is end-of-arg-list indicator)
*
* Note1: These values are completely independent from the ACPI_TYPEs
* i.e., ARGI_INTEGER != ACPI_TYPE_INTEGER
*
* Note2: If and when 5 bits becomes insufficient, it would probably be best
* to convert to a 6-byte array of argument types, allowing 8 bits per argument.
*/
/* Single, simple types */
#define ARGI_ANYTYPE 0x01 /* Don't care */
#define ARGI_PACKAGE 0x02
#define ARGI_EVENT 0x03
#define ARGI_MUTEX 0x04
#define ARGI_DDBHANDLE 0x05
/* Interchangeable types (via implicit conversion) */
#define ARGI_INTEGER 0x06
#define ARGI_STRING 0x07
#define ARGI_BUFFER 0x08
#define ARGI_BUFFER_OR_STRING 0x09 /* Used by MID op only */
#define ARGI_COMPUTEDATA 0x0A /* Buffer, String, or Integer */
/* Reference objects */
#define ARGI_INTEGER_REF 0x0B
#define ARGI_OBJECT_REF 0x0C
#define ARGI_DEVICE_REF 0x0D
#define ARGI_REFERENCE 0x0E
#define ARGI_TARGETREF 0x0F /* Target, subject to implicit conversion */
#define ARGI_FIXED_TARGET 0x10 /* Target, no implicit conversion */
#define ARGI_SIMPLE_TARGET 0x11 /* Name, Local, Arg -- no implicit conversion */
/* Multiple/complex types */
#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */
#define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */
#define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */
#define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */
#define ARGI_DATAREFOBJ 0x16
/* Note: types above can expand to 0x1F maximum */
#define ARGI_INVALID_OPCODE 0xFFFFFFFF
/*
* hash offsets
*/
#define AML_EXTOP_HASH_OFFSET 22
#define AML_LNOT_HASH_OFFSET 19
/*
* opcode groups and types
*/
#define OPGRP_NAMED 0x01
#define OPGRP_FIELD 0x02
#define OPGRP_BYTELIST 0x04
/*
* Opcode information
*/
/* Opcode flags */
#define AML_LOGICAL 0x0001
#define AML_LOGICAL_NUMERIC 0x0002
#define AML_MATH 0x0004
#define AML_CREATE 0x0008
#define AML_FIELD 0x0010
#define AML_DEFER 0x0020
#define AML_NAMED 0x0040
#define AML_NSNODE 0x0080
#define AML_NSOPCODE 0x0100
#define AML_NSOBJECT 0x0200
#define AML_HAS_RETVAL 0x0400
#define AML_HAS_TARGET 0x0800
#define AML_HAS_ARGS 0x1000
#define AML_CONSTANT 0x2000
#define AML_NO_OPERAND_RESOLVE 0x4000
/* Convenient flag groupings */
#define AML_FLAGS_EXEC_0A_0T_1R AML_HAS_RETVAL
#define AML_FLAGS_EXEC_1A_0T_0R AML_HAS_ARGS /* Monadic1 */
#define AML_FLAGS_EXEC_1A_0T_1R AML_HAS_ARGS | AML_HAS_RETVAL /* Monadic2 */
#define AML_FLAGS_EXEC_1A_1T_0R AML_HAS_ARGS | AML_HAS_TARGET
#define AML_FLAGS_EXEC_1A_1T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL /* monadic2_r */
#define AML_FLAGS_EXEC_2A_0T_0R AML_HAS_ARGS /* Dyadic1 */
#define AML_FLAGS_EXEC_2A_0T_1R AML_HAS_ARGS | AML_HAS_RETVAL /* Dyadic2 */
#define AML_FLAGS_EXEC_2A_1T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL /* dyadic2_r */
#define AML_FLAGS_EXEC_2A_2T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL
#define AML_FLAGS_EXEC_3A_0T_0R AML_HAS_ARGS
#define AML_FLAGS_EXEC_3A_1T_1R AML_HAS_ARGS | AML_HAS_TARGET | AML_HAS_RETVAL
#define AML_FLAGS_EXEC_6A_0T_1R AML_HAS_ARGS | AML_HAS_RETVAL
/*
* The opcode Type is used in a dispatch table, do not change
* without updating the table.
*/
#define AML_TYPE_EXEC_0A_0T_1R 0x00
#define AML_TYPE_EXEC_1A_0T_0R 0x01 /* Monadic1 */
#define AML_TYPE_EXEC_1A_0T_1R 0x02 /* Monadic2 */
#define AML_TYPE_EXEC_1A_1T_0R 0x03
#define AML_TYPE_EXEC_1A_1T_1R 0x04 /* monadic2_r */
#define AML_TYPE_EXEC_2A_0T_0R 0x05 /* Dyadic1 */
#define AML_TYPE_EXEC_2A_0T_1R 0x06 /* Dyadic2 */
#define AML_TYPE_EXEC_2A_1T_1R 0x07 /* dyadic2_r */
#define AML_TYPE_EXEC_2A_2T_1R 0x08
#define AML_TYPE_EXEC_3A_0T_0R 0x09
#define AML_TYPE_EXEC_3A_1T_1R 0x0A
#define AML_TYPE_EXEC_6A_0T_1R 0x0B
/* End of types used in dispatch table */
#define AML_TYPE_LITERAL 0x0B
#define AML_TYPE_CONSTANT 0x0C
#define AML_TYPE_METHOD_ARGUMENT 0x0D
#define AML_TYPE_LOCAL_VARIABLE 0x0E
#define AML_TYPE_DATA_TERM 0x0F
/* Generic for an op that returns a value */
#define AML_TYPE_METHOD_CALL 0x10
/* Misc */
#define AML_TYPE_CREATE_FIELD 0x11
#define AML_TYPE_CREATE_OBJECT 0x12
#define AML_TYPE_CONTROL 0x13
#define AML_TYPE_NAMED_NO_OBJ 0x14
#define AML_TYPE_NAMED_FIELD 0x15
#define AML_TYPE_NAMED_SIMPLE 0x16
#define AML_TYPE_NAMED_COMPLEX 0x17
#define AML_TYPE_RETURN 0x18
#define AML_TYPE_UNDEFINED 0x19
#define AML_TYPE_BOGUS 0x1A
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 20:49:35 -06:00
/* AML Package Length encodings */
#define ACPI_AML_PACKAGE_TYPE1 0x40
#define ACPI_AML_PACKAGE_TYPE2 0x4000
#define ACPI_AML_PACKAGE_TYPE3 0x400000
#define ACPI_AML_PACKAGE_TYPE4 0x40000000
/*
* Opcode classes
*/
#define AML_CLASS_EXECUTE 0x00
#define AML_CLASS_CREATE 0x01
#define AML_CLASS_ARGUMENT 0x02
#define AML_CLASS_NAMED_OBJECT 0x03
#define AML_CLASS_CONTROL 0x04
#define AML_CLASS_ASCII 0x05
#define AML_CLASS_PREFIX 0x06
#define AML_CLASS_INTERNAL 0x07
#define AML_CLASS_RETURN_VALUE 0x08
#define AML_CLASS_METHOD_CALL 0x09
#define AML_CLASS_UNKNOWN 0x0A
/* Predefined Operation Region space_iDs */
typedef enum {
REGION_MEMORY = 0,
REGION_IO,
REGION_PCI_CONFIG,
REGION_EC,
REGION_SMBUS,
REGION_CMOS,
REGION_PCI_BAR,
REGION_DATA_TABLE, /* Internal use only */
REGION_FIXED_HW = 0x7F
} AML_REGION_TYPES;
/* Comparison operation codes for match_op operator */
typedef enum {
MATCH_MTR = 0,
MATCH_MEQ = 1,
MATCH_MLE = 2,
MATCH_MLT = 3,
MATCH_MGE = 4,
MATCH_MGT = 5
} AML_MATCH_OPERATOR;
#define MAX_MATCH_OPERATOR 5
/*
* field_flags
*
* This byte is extracted from the AML and includes three separate
* pieces of information about the field:
* 1) The field access type
* 2) The field update rule
* 3) The lock rule for the field
*
* Bits 00 - 03 : access_type (any_acc, byte_acc, etc.)
* 04 : lock_rule (1 == Lock)
* 05 - 06 : update_rule
*/
#define AML_FIELD_ACCESS_TYPE_MASK 0x0F
#define AML_FIELD_LOCK_RULE_MASK 0x10
#define AML_FIELD_UPDATE_RULE_MASK 0x60
/* 1) Field Access Types */
typedef enum {
AML_FIELD_ACCESS_ANY = 0x00,
AML_FIELD_ACCESS_BYTE = 0x01,
AML_FIELD_ACCESS_WORD = 0x02,
AML_FIELD_ACCESS_DWORD = 0x03,
AML_FIELD_ACCESS_QWORD = 0x04, /* ACPI 2.0 */
AML_FIELD_ACCESS_BUFFER = 0x05 /* ACPI 2.0 */
} AML_ACCESS_TYPE;
/* 2) Field Lock Rules */
typedef enum {
AML_FIELD_LOCK_NEVER = 0x00,
AML_FIELD_LOCK_ALWAYS = 0x10
} AML_LOCK_RULE;
/* 3) Field Update Rules */
typedef enum {
AML_FIELD_UPDATE_PRESERVE = 0x00,
AML_FIELD_UPDATE_WRITE_AS_ONES = 0x20,
AML_FIELD_UPDATE_WRITE_AS_ZEROS = 0x40
} AML_UPDATE_RULE;
/*
* Field Access Attributes.
* This byte is extracted from the AML via the
* access_as keyword
*/
typedef enum {
AML_FIELD_ATTRIB_SMB_QUICK = 0x02,
AML_FIELD_ATTRIB_SMB_SEND_RCV = 0x04,
AML_FIELD_ATTRIB_SMB_BYTE = 0x06,
AML_FIELD_ATTRIB_SMB_WORD = 0x08,
AML_FIELD_ATTRIB_SMB_BLOCK = 0x0A,
AML_FIELD_ATTRIB_SMB_WORD_CALL = 0x0C,
AML_FIELD_ATTRIB_SMB_BLOCK_CALL = 0x0D
} AML_ACCESS_ATTRIBUTE;
/* Bit fields in method_flags byte */
#define AML_METHOD_ARG_COUNT 0x07
#define AML_METHOD_SERIALIZED 0x08
#define AML_METHOD_SYNCH_LEVEL 0xF0
/* METHOD_FLAGS_ARG_COUNT is not used internally, define additional flags */
#define AML_METHOD_INTERNAL_ONLY 0x01
#define AML_METHOD_RESERVED1 0x02
#define AML_METHOD_RESERVED2 0x04
#endif /* __AMLCODE_H__ */