1
0
Fork 0
alistair23-linux/arch/arm/boot/dts/exynos5440.dtsi

220 lines
4.5 KiB
Plaintext
Raw Normal View History

/*
* SAMSUNG EXYNOS5440 SoC device tree source
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "samsung,exynos5440";
interrupt-parent = <&gic>;
clock: clock-controller@0x160000 {
compatible = "samsung,exynos5440-clock";
reg = <0x160000 0x1000>;
#clock-cells = <1>;
};
gic:interrupt-controller@2E0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x2E1000 0x1000>,
<0x2E2000 0x1000>,
<0x2E4000 0x2000>,
<0x2E6000 0x2000>;
interrupts = <1 9 0xf04>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a15";
reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a15";
reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a15";
reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a15";
reg = <3>;
};
};
arm-pmu {
compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
interrupts = <0 52 4>,
<0 53 4>,
<0 54 4>,
<0 55 4>;
};
timer {
compatible = "arm,cortex-a15-timer",
"arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
clock-frequency = <50000000>;
};
cpufreq@160000 {
compatible = "samsung,exynos5440-cpufreq";
reg = <0x160000 0x1000>;
interrupts = <0 57 0>;
operating-points = <
/* KHz uV */
1200000 1025000
1000000 975000
800000 925000
>;
};
serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
clocks = <&clock 21>, <&clock 21>;
clock-names = "uart", "clk_uart_baud0";
};
serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
clocks = <&clock 21>, <&clock 21>;
clock-names = "uart", "clk_uart_baud0";
};
spi {
compatible = "samsung,exynos4210-spi";
reg = <0xD0000 0x1000>;
interrupts = <0 4 0>;
tx-dma-channel = <&pdma0 5>; /* preliminary */
rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 21>, <&clock 16>;
clock-names = "spi", "spi_busclk0";
};
pinctrl {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
<0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
fan: fan {
samsung,exynos5440-pin-function = <1>;
};
hdd_led0: hdd_led0 {
samsung,exynos5440-pin-function = <2>;
};
hdd_led1: hdd_led1 {
samsung,exynos5440-pin-function = <3>;
};
uart1: uart1 {
samsung,exynos5440-pin-function = <4>;
};
};
i2c@F0000 {
compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 21>;
clock-names = "i2c";
};
i2c@100000 {
compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 21>;
clock-names = "i2c";
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
clocks = <&clock 21>;
clock-names = "watchdog";
};
gmac: ethernet@00230000 {
compatible = "snps,dwmac-3.70a";
reg = <0x00230000 0x8000>;
interrupt-parent = <&gic>;
interrupts = <0 31 4>;
interrupt-names = "macirq";
phy-mode = "sgmii";
clocks = <&clock 25>;
clock-names = "stmmaceth";
};
amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "arm,amba-bus";
interrupt-parent = <&gic>;
ranges;
pdma0: pdma@00121000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 46 0>;
clocks = <&clock 8>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@00120000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 47 0>;
clocks = <&clock 8>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
};
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
clocks = <&clock 21>;
clock-names = "rtc";
ARM: dts: Disable the RTC by default on exynos5 This change makes the rtc on the exynos5250 and 5440 disabled by default to match exynos4. Ever since the common clock framework came in, exynos5250 boards have dumped lots of warnings in the boot log. It turns out that we don't see those on exynos4 since the rtc is disabled by default. While we need to get to the bottom of the problems with the RTC, it still makes sense to have the default state of the RTC on exynos boards match. For the record, warnings look like this: ------------[ cut here ]------------ WARNING: at drivers/clk/clk.c:771 __clk_enable+0x34/0xb0() Modules linked in: [<80015bfc>] (unwind_backtrace+0x0/0xec) from [<804717f0>] (dump_stack+0x20/0x24) [<804717f0>] (dump_stack+0x20/0x24) from [<80023cd0>] (warn_slowpath_common+0x5c/0x7c) [<80023cd0>] (warn_slowpath_common+0x5c/0x7c) from [<80023d1c>] (warn_slowpath_null+0x2c/0x34) [<80023d1c>] (warn_slowpath_null+0x2c/0x34) from [<8035ddb0>] (__clk_enable+0x34/0xb0) [<8035ddb0>] (__clk_enable+0x34/0xb0) from [<8035de54>] (clk_enable+0x28/0x3c) [<8035de54>] (clk_enable+0x28/0x3c) from [<8031a160>] (s3c_rtc_probe+0xf4/0x434) [<8031a160>] (s3c_rtc_probe+0xf4/0x434) from [<8028e288>] (platform_drv_probe+0x24/0x28) [<8028e288>] (platform_drv_probe+0x24/0x28) from [<8028ce10>] (driver_probe_device+0xbc/0x22c) [<8028ce10>] (driver_probe_device+0xbc/0x22c) from [<8028cff8>] (__driver_attach+0x78/0x9c) [<8028cff8>] (__driver_attach+0x78/0x9c) from [<8028bdfc>] (bus_for_each_dev+0x64/0xac) [<8028bdfc>] (bus_for_each_dev+0x64/0xac) from [<8028c7e0>] (driver_attach+0x28/0x30) [<8028c7e0>] (driver_attach+0x28/0x30) from [<8028c43c>] (bus_add_driver+0xe0/0x234) [<8028c43c>] (bus_add_driver+0xe0/0x234) from [<8028d55c>] (driver_register+0xac/0x13c) [<8028d55c>] (driver_register+0xac/0x13c) from [<8028e4f4>] (platform_driver_register+0x54/0x68) [<8028e4f4>] (platform_driver_register+0x54/0x68) from [<8065c944>] (s3c_rtc_driver_init+0x14/0x1c) [<8065c944>] (s3c_rtc_driver_init+0x14/0x1c) from [<800086d8>] (do_one_initcall+0x60/0x138) [<800086d8>] (do_one_initcall+0x60/0x138) from [<80633a8c>] (kernel_init_freeable+0x108/0x1d0) [<80633a8c>] (kernel_init_freeable+0x108/0x1d0) from [<8046d2f8>] (kernel_init+0x1c/0xf4) [<8046d2f8>] (kernel_init+0x1c/0xf4) from [<8000e358>] (ret_from_fork+0x14/0x20) ---[ end trace 4bcdc801c868d73f ]--- Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-08 12:26:32 -06:00
status = "disabled";
};
};