2019-12-13 01:34:02 -07:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Copyright 2019 NXP
|
|
|
|
*
|
|
|
|
* Clock driver for LS1028A Display output interfaces(LCD, DPHY).
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/clk-provider.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/iopoll.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/bitfield.h>
|
|
|
|
|
|
|
|
/* PLLDIG register offsets and bit masks */
|
|
|
|
#define PLLDIG_REG_PLLSR 0x24
|
|
|
|
#define PLLDIG_LOCK_MASK BIT(2)
|
|
|
|
#define PLLDIG_REG_PLLDV 0x28
|
|
|
|
#define PLLDIG_MFD_MASK GENMASK(7, 0)
|
|
|
|
#define PLLDIG_RFDPHI1_MASK GENMASK(30, 25)
|
|
|
|
#define PLLDIG_REG_PLLFM 0x2c
|
|
|
|
#define PLLDIG_SSCGBYP_ENABLE BIT(30)
|
|
|
|
#define PLLDIG_REG_PLLFD 0x30
|
|
|
|
#define PLLDIG_FDEN BIT(30)
|
|
|
|
#define PLLDIG_FRAC_MASK GENMASK(15, 0)
|
|
|
|
#define PLLDIG_REG_PLLCAL1 0x38
|
|
|
|
#define PLLDIG_REG_PLLCAL2 0x3c
|
|
|
|
|
|
|
|
/* Range of the VCO frequencies, in Hz */
|
|
|
|
#define PLLDIG_MIN_VCO_FREQ 650000000
|
|
|
|
#define PLLDIG_MAX_VCO_FREQ 1300000000
|
|
|
|
|
|
|
|
/* Range of the output frequencies, in Hz */
|
2020-02-02 22:25:06 -07:00
|
|
|
#define PHI1_MIN_FREQ 27000000UL
|
|
|
|
#define PHI1_MAX_FREQ 600000000UL
|
2019-12-13 01:34:02 -07:00
|
|
|
|
|
|
|
/* Maximum value of the reduced frequency divider */
|
|
|
|
#define MAX_RFDPHI1 63UL
|
|
|
|
|
|
|
|
/* Best value of multiplication factor divider */
|
|
|
|
#define PLLDIG_DEFAULT_MFD 44
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Denominator part of the fractional part of the
|
|
|
|
* loop multiplication factor.
|
|
|
|
*/
|
|
|
|
#define MFDEN 20480
|
|
|
|
|
|
|
|
static const struct clk_parent_data parent_data[] = {
|
|
|
|
{ .index = 0 },
|
|
|
|
};
|
|
|
|
|
|
|
|
struct clk_plldig {
|
|
|
|
struct clk_hw hw;
|
|
|
|
void __iomem *regs;
|
|
|
|
unsigned int vco_freq;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define to_clk_plldig(_hw) container_of(_hw, struct clk_plldig, hw)
|
|
|
|
|
|
|
|
static int plldig_enable(struct clk_hw *hw)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data = to_clk_plldig(hw);
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = readl(data->regs + PLLDIG_REG_PLLFM);
|
|
|
|
/*
|
|
|
|
* Use Bypass mode with PLL off by default, the frequency overshoot
|
|
|
|
* detector output was disable. SSCG Bypass mode should be enable.
|
|
|
|
*/
|
|
|
|
val |= PLLDIG_SSCGBYP_ENABLE;
|
|
|
|
writel(val, data->regs + PLLDIG_REG_PLLFM);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void plldig_disable(struct clk_hw *hw)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data = to_clk_plldig(hw);
|
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = readl(data->regs + PLLDIG_REG_PLLFM);
|
|
|
|
|
|
|
|
val &= ~PLLDIG_SSCGBYP_ENABLE;
|
|
|
|
val |= FIELD_PREP(PLLDIG_SSCGBYP_ENABLE, 0x0);
|
|
|
|
|
|
|
|
writel(val, data->regs + PLLDIG_REG_PLLFM);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int plldig_is_enabled(struct clk_hw *hw)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data = to_clk_plldig(hw);
|
|
|
|
|
|
|
|
return readl(data->regs + PLLDIG_REG_PLLFM) &
|
|
|
|
PLLDIG_SSCGBYP_ENABLE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long plldig_recalc_rate(struct clk_hw *hw,
|
|
|
|
unsigned long parent_rate)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data = to_clk_plldig(hw);
|
|
|
|
u32 val, rfdphi1;
|
|
|
|
|
|
|
|
val = readl(data->regs + PLLDIG_REG_PLLDV);
|
|
|
|
|
|
|
|
/* Check if PLL is bypassed */
|
|
|
|
if (val & PLLDIG_SSCGBYP_ENABLE)
|
|
|
|
return parent_rate;
|
|
|
|
|
|
|
|
rfdphi1 = FIELD_GET(PLLDIG_RFDPHI1_MASK, val);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If RFDPHI1 has a value of 1 the VCO frequency is also divided by
|
|
|
|
* one.
|
|
|
|
*/
|
|
|
|
if (!rfdphi1)
|
|
|
|
rfdphi1 = 1;
|
|
|
|
|
|
|
|
return DIV_ROUND_UP(data->vco_freq, rfdphi1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long plldig_calc_target_div(unsigned long vco_freq,
|
|
|
|
unsigned long target_rate)
|
|
|
|
{
|
|
|
|
unsigned long div;
|
|
|
|
|
|
|
|
div = DIV_ROUND_CLOSEST(vco_freq, target_rate);
|
|
|
|
div = clamp(div, 1UL, MAX_RFDPHI1);
|
|
|
|
|
|
|
|
return div;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int plldig_determine_rate(struct clk_hw *hw,
|
|
|
|
struct clk_rate_request *req)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data = to_clk_plldig(hw);
|
|
|
|
unsigned int div;
|
|
|
|
|
|
|
|
req->rate = clamp(req->rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
|
|
|
|
div = plldig_calc_target_div(data->vco_freq, req->rate);
|
|
|
|
req->rate = DIV_ROUND_UP(data->vco_freq, div);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int plldig_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
|
|
unsigned long parent_rate)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data = to_clk_plldig(hw);
|
|
|
|
unsigned int val, cond;
|
|
|
|
unsigned int rfdphi1;
|
|
|
|
|
|
|
|
rate = clamp(rate, PHI1_MIN_FREQ, PHI1_MAX_FREQ);
|
|
|
|
rfdphi1 = plldig_calc_target_div(data->vco_freq, rate);
|
|
|
|
|
|
|
|
/* update the divider value */
|
|
|
|
val = readl(data->regs + PLLDIG_REG_PLLDV);
|
|
|
|
val &= ~PLLDIG_RFDPHI1_MASK;
|
|
|
|
val |= FIELD_PREP(PLLDIG_RFDPHI1_MASK, rfdphi1);
|
|
|
|
writel(val, data->regs + PLLDIG_REG_PLLDV);
|
|
|
|
|
|
|
|
/* waiting for old lock state to clear */
|
|
|
|
udelay(200);
|
|
|
|
|
|
|
|
/* Wait until PLL is locked or timeout */
|
|
|
|
return readl_poll_timeout_atomic(data->regs + PLLDIG_REG_PLLSR, cond,
|
|
|
|
cond & PLLDIG_LOCK_MASK, 0,
|
|
|
|
USEC_PER_MSEC);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct clk_ops plldig_clk_ops = {
|
|
|
|
.enable = plldig_enable,
|
|
|
|
.disable = plldig_disable,
|
|
|
|
.is_enabled = plldig_is_enabled,
|
|
|
|
.recalc_rate = plldig_recalc_rate,
|
|
|
|
.determine_rate = plldig_determine_rate,
|
|
|
|
.set_rate = plldig_set_rate,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int plldig_init(struct clk_hw *hw)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data = to_clk_plldig(hw);
|
|
|
|
struct clk_hw *parent = clk_hw_get_parent(hw);
|
2020-02-03 15:37:36 -07:00
|
|
|
unsigned long parent_rate;
|
2019-12-13 01:34:02 -07:00
|
|
|
unsigned long val;
|
|
|
|
unsigned long long lltmp;
|
|
|
|
unsigned int mfd, fracdiv = 0;
|
|
|
|
|
|
|
|
if (!parent)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2020-02-03 15:37:36 -07:00
|
|
|
parent_rate = clk_hw_get_rate(parent);
|
|
|
|
|
2019-12-13 01:34:02 -07:00
|
|
|
if (data->vco_freq) {
|
|
|
|
mfd = data->vco_freq / parent_rate;
|
|
|
|
lltmp = data->vco_freq % parent_rate;
|
|
|
|
lltmp *= MFDEN;
|
|
|
|
do_div(lltmp, parent_rate);
|
|
|
|
fracdiv = lltmp;
|
|
|
|
} else {
|
|
|
|
mfd = PLLDIG_DEFAULT_MFD;
|
|
|
|
data->vco_freq = parent_rate * mfd;
|
|
|
|
}
|
|
|
|
|
|
|
|
val = FIELD_PREP(PLLDIG_MFD_MASK, mfd);
|
|
|
|
writel(val, data->regs + PLLDIG_REG_PLLDV);
|
|
|
|
|
|
|
|
/* Enable fractional divider */
|
|
|
|
if (fracdiv) {
|
|
|
|
val = FIELD_PREP(PLLDIG_FRAC_MASK, fracdiv);
|
|
|
|
val |= PLLDIG_FDEN;
|
|
|
|
writel(val, data->regs + PLLDIG_REG_PLLFD);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int plldig_clk_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct clk_plldig *data;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
|
|
if (!data)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
data->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
|
|
if (IS_ERR(data->regs))
|
|
|
|
return PTR_ERR(data->regs);
|
|
|
|
|
|
|
|
data->hw.init = CLK_HW_INIT_PARENTS_DATA("dpclk",
|
|
|
|
parent_data,
|
|
|
|
&plldig_clk_ops,
|
|
|
|
0);
|
|
|
|
|
|
|
|
ret = devm_clk_hw_register(dev, &data->hw);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "failed to register %s clock\n",
|
|
|
|
dev->of_node->name);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
|
|
|
|
&data->hw);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "unable to add clk provider\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The frequency of the VCO cannot be changed during runtime.
|
|
|
|
* Therefore, let the user specify a desired frequency.
|
|
|
|
*/
|
|
|
|
if (!of_property_read_u32(dev->of_node, "fsl,vco-hz",
|
|
|
|
&data->vco_freq)) {
|
|
|
|
if (data->vco_freq < PLLDIG_MIN_VCO_FREQ ||
|
|
|
|
data->vco_freq > PLLDIG_MAX_VCO_FREQ)
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return plldig_init(&data->hw);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id plldig_clk_id[] = {
|
|
|
|
{ .compatible = "fsl,ls1028a-plldig" },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, plldig_clk_id);
|
|
|
|
|
|
|
|
static struct platform_driver plldig_clk_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "plldig-clock",
|
|
|
|
.of_match_table = plldig_clk_id,
|
|
|
|
},
|
|
|
|
.probe = plldig_clk_probe,
|
|
|
|
};
|
|
|
|
module_platform_driver(plldig_clk_driver);
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
MODULE_AUTHOR("Wen He <wen.he_1@nxp.com>");
|
|
|
|
MODULE_DESCRIPTION("LS1028A Display output interface pixel clock driver");
|