ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
/*
|
|
|
|
|
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
|
*/
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
|
|
#include "dra74x.dtsi"
|
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
|
|
|
|
|
|
/ {
|
|
|
|
|
model = "TI AM5728 BeagleBoard-X15";
|
|
|
|
|
compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
|
|
|
|
|
|
|
|
|
|
aliases {
|
|
|
|
|
rtc0 = &mcp_rtc;
|
|
|
|
|
rtc1 = &tps659038_rtc;
|
2015-04-08 17:56:27 -06:00
|
|
|
rtc2 = &rtc;
|
2015-02-12 03:23:10 -07:00
|
|
|
display0 = &hdmi0;
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
memory {
|
|
|
|
|
device_type = "memory";
|
|
|
|
|
reg = <0x80000000 0x80000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
vdd_3v3: fixedregulator-vdd_3v3 {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "vdd_3v3";
|
|
|
|
|
vin-supply = <®en1>;
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-08-24 01:20:06 -06:00
|
|
|
aic_dvdd: fixedregulator-aic_dvdd {
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "aic_dvdd_fixed";
|
|
|
|
|
vin-supply = <&vdd_3v3>;
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
vtt_fixed: fixedregulator-vtt {
|
|
|
|
|
/* TPS51200 */
|
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
|
regulator-name = "vtt_fixed";
|
|
|
|
|
vin-supply = <&smps3_reg>;
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
leds {
|
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&leds_pins_default>;
|
|
|
|
|
|
|
|
|
|
led@0 {
|
|
|
|
|
label = "beagle-x15:usr0";
|
|
|
|
|
gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
linux,default-trigger = "heartbeat";
|
|
|
|
|
default-state = "off";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
led@1 {
|
|
|
|
|
label = "beagle-x15:usr1";
|
|
|
|
|
gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
linux,default-trigger = "cpu0";
|
|
|
|
|
default-state = "off";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
led@2 {
|
|
|
|
|
label = "beagle-x15:usr2";
|
|
|
|
|
gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
linux,default-trigger = "mmc0";
|
|
|
|
|
default-state = "off";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
led@3 {
|
|
|
|
|
label = "beagle-x15:usr3";
|
|
|
|
|
gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
linux,default-trigger = "ide-disk";
|
|
|
|
|
default-state = "off";
|
|
|
|
|
};
|
|
|
|
|
};
|
2015-01-05 09:32:29 -07:00
|
|
|
|
|
|
|
|
gpio_fan: gpio_fan {
|
|
|
|
|
/* Based on 5v 500mA AFB02505HHB */
|
|
|
|
|
compatible = "gpio-fan";
|
2015-04-09 16:33:17 -06:00
|
|
|
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
|
2015-01-05 09:32:29 -07:00
|
|
|
gpio-fan,speed-map = <0 0>,
|
|
|
|
|
<13000 1>;
|
2015-03-23 13:39:39 -06:00
|
|
|
#cooling-cells = <2>;
|
2015-01-05 09:32:29 -07:00
|
|
|
};
|
2015-01-26 05:15:30 -07:00
|
|
|
|
|
|
|
|
extcon_usb1: extcon_usb1 {
|
|
|
|
|
compatible = "linux,extcon-usb-gpio";
|
|
|
|
|
id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&extcon_usb1_pins>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-02-12 03:23:10 -07:00
|
|
|
hdmi0: connector {
|
|
|
|
|
compatible = "hdmi-connector";
|
|
|
|
|
label = "hdmi";
|
|
|
|
|
|
|
|
|
|
type = "a";
|
|
|
|
|
|
|
|
|
|
port {
|
|
|
|
|
hdmi_connector_in: endpoint {
|
|
|
|
|
remote-endpoint = <&tpd12s015_out>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
tpd12s015: encoder {
|
|
|
|
|
compatible = "ti,tpd12s015";
|
|
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&tpd12s015_pins>;
|
|
|
|
|
|
|
|
|
|
gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
|
|
|
|
|
<&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
|
|
|
|
|
<&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
|
|
|
|
|
|
|
|
|
|
ports {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
|
|
port@0 {
|
|
|
|
|
reg = <0>;
|
|
|
|
|
|
|
|
|
|
tpd12s015_in: endpoint {
|
|
|
|
|
remote-endpoint = <&hdmi_out>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
port@1 {
|
|
|
|
|
reg = <1>;
|
|
|
|
|
|
|
|
|
|
tpd12s015_out: endpoint {
|
|
|
|
|
remote-endpoint = <&hdmi_connector_in>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
2015-08-24 01:20:07 -06:00
|
|
|
|
|
|
|
|
sound0: sound@0 {
|
|
|
|
|
compatible = "simple-audio-card";
|
|
|
|
|
simple-audio-card,name = "BeagleBoard-X15";
|
|
|
|
|
simple-audio-card,widgets =
|
|
|
|
|
"Line", "Line Out",
|
|
|
|
|
"Line", "Line In";
|
|
|
|
|
simple-audio-card,routing =
|
|
|
|
|
"Line Out", "LLOUT",
|
|
|
|
|
"Line Out", "RLOUT",
|
|
|
|
|
"MIC2L", "Line In",
|
|
|
|
|
"MIC2R", "Line In";
|
|
|
|
|
simple-audio-card,format = "dsp_b";
|
|
|
|
|
simple-audio-card,bitclock-master = <&sound0_master>;
|
|
|
|
|
simple-audio-card,frame-master = <&sound0_master>;
|
|
|
|
|
simple-audio-card,bitclock-inversion;
|
|
|
|
|
|
|
|
|
|
simple-audio-card,cpu {
|
|
|
|
|
sound-dai = <&mcasp3>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
sound0_master: simple-audio-card,codec {
|
|
|
|
|
sound-dai = <&tlv320aic3104>;
|
|
|
|
|
clocks = <&clkout2_clk>;
|
|
|
|
|
};
|
|
|
|
|
};
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&dra7_pmx_core {
|
|
|
|
|
leds_pins_default: leds_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
|
|
|
|
|
0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
|
|
|
|
|
0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
|
|
|
|
|
0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
i2c1_pins_default: i2c1_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
|
|
|
|
|
0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-02-12 03:23:10 -07:00
|
|
|
hdmi_pins: pinmux_hdmi_pins {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
|
|
|
|
|
0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
i2c3_pins_default: i2c3_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
|
|
|
|
|
0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
uart3_pins_default: uart3_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
2015-04-08 16:40:59 -06:00
|
|
|
0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
|
|
|
|
|
0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mmc1_pins_default: mmc1_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
|
|
|
|
|
0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
|
|
|
|
|
0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
|
|
|
|
|
0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
|
|
|
|
|
0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
|
|
|
|
|
0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
|
|
|
|
|
0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mmc2_pins_default: mmc2_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
|
|
|
|
|
0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
|
|
|
|
|
0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
|
|
|
|
|
0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
|
|
|
|
|
0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
|
|
|
|
|
0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
|
|
|
|
|
0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
|
|
|
|
|
0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
|
|
|
|
|
0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
|
|
|
|
|
0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2014-12-04 14:02:57 -07:00
|
|
|
cpsw_pins_default: cpsw_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
/* Slave 1 */
|
|
|
|
|
0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
|
|
|
|
|
0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
|
|
|
|
|
0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
|
|
|
|
|
0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
|
|
|
|
|
0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
|
|
|
|
|
0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
|
|
|
|
|
0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
|
|
|
|
|
0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
|
|
|
|
|
0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
|
|
|
|
|
0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
|
|
|
|
|
0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
|
|
|
|
|
0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
|
|
|
|
|
|
|
|
|
|
/* Slave 2 */
|
|
|
|
|
0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
|
|
|
|
|
0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
|
|
|
|
|
0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
|
|
|
|
|
0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
|
|
|
|
|
0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
|
|
|
|
|
0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
|
|
|
|
|
0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
|
|
|
|
|
0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
|
|
|
|
|
0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
|
|
|
|
|
0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
|
|
|
|
|
0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
|
|
|
|
|
0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
|
|
|
|
|
>;
|
|
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
cpsw_pins_sleep: cpsw_pins_sleep {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
/* Slave 1 */
|
|
|
|
|
0x250 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x254 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x258 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x25c (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x260 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x264 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x268 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x26c (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x270 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x274 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x278 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x27c (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
|
|
|
|
|
/* Slave 2 */
|
|
|
|
|
0x198 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x19c (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1a0 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1a4 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1a8 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1ac (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1b0 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1b4 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1b8 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1bc (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1c0 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x1c4 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
davinci_mdio_pins_default: davinci_mdio_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
/* MDIO */
|
|
|
|
|
0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
|
|
|
|
|
0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x23c (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x240 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
tps659038_pins_default: tps659038_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
tmp102_pins_default: tmp102_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mcp79410_pins_default: mcp79410_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
usb1_pins: pinmux_usb1_pins {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-01-26 05:15:30 -07:00
|
|
|
extcon_usb1_pins: extcon_usb1_pins {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-02-12 03:23:10 -07:00
|
|
|
tpd12s015_pins: pinmux_tpd12s015_pins {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
|
|
|
|
|
0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
|
|
|
|
|
0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
|
|
|
|
|
>;
|
|
|
|
|
};
|
2015-08-24 01:20:07 -06:00
|
|
|
|
|
|
|
|
clkout2_pins_default: clkout2_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
clkout2_pins_sleep: clkout2_pins_sleep {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mcasp3_pins_default: mcasp3_pins_default {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
|
|
|
|
|
0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
|
|
|
|
|
0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
|
|
|
|
|
0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
|
|
|
|
|
>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
mcasp3_pins_sleep: mcasp3_pins_sleep {
|
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
0x324 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x328 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x32c (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
0x330 (PIN_INPUT | MUX_MODE15)
|
|
|
|
|
>;
|
|
|
|
|
};
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2c1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&i2c1_pins_default>;
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
|
|
|
|
|
tps659038: tps659038@58 {
|
|
|
|
|
compatible = "ti,tps659038";
|
|
|
|
|
reg = <0x58>;
|
|
|
|
|
interrupt-parent = <&gpio1>;
|
|
|
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&tps659038_pins_default>;
|
|
|
|
|
|
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
|
|
|
|
|
ti,system-power-controller;
|
|
|
|
|
|
|
|
|
|
tps659038_pmic {
|
|
|
|
|
compatible = "ti,tps659038-pmic";
|
|
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
|
smps12_reg: smps12 {
|
|
|
|
|
/* VDD_MPU */
|
|
|
|
|
regulator-name = "smps12";
|
|
|
|
|
regulator-min-microvolt = < 850000>;
|
|
|
|
|
regulator-max-microvolt = <1250000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
smps3_reg: smps3 {
|
|
|
|
|
/* VDD_DDR */
|
|
|
|
|
regulator-name = "smps3";
|
|
|
|
|
regulator-min-microvolt = <1350000>;
|
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
smps45_reg: smps45 {
|
|
|
|
|
/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
|
|
|
|
|
regulator-name = "smps45";
|
|
|
|
|
regulator-min-microvolt = < 850000>;
|
|
|
|
|
regulator-max-microvolt = <1150000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
smps6_reg: smps6 {
|
|
|
|
|
/* VDD_CORE */
|
|
|
|
|
regulator-name = "smps6";
|
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
|
regulator-max-microvolt = <1030000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* SMPS7 unused */
|
|
|
|
|
|
|
|
|
|
smps8_reg: smps8 {
|
|
|
|
|
/* VDD_1V8 */
|
|
|
|
|
regulator-name = "smps8";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/* SMPS9 unused */
|
|
|
|
|
|
|
|
|
|
ldo1_reg: ldo1 {
|
2015-09-25 07:02:03 -06:00
|
|
|
/* VDD_SD / VDDSHV8 */
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
regulator-name = "ldo1";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-boot-on;
|
2015-09-25 07:02:03 -06:00
|
|
|
regulator-always-on;
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo2_reg: ldo2 {
|
|
|
|
|
/* VDD_SHV5 */
|
|
|
|
|
regulator-name = "ldo2";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldo3_reg: ldo3 {
|
ARM: dts: am57xx-beagle-x15: Update Phy supplies
Originally, all the SoC PHY rails were supplied by LDO3. However, as a
result of characterization, it was determined that this posed a risk in
extreme load conditions. Hence the PHY rails are split between two
different LDOs. Update the related node as a result
LDO3/VDDA_1V8_PHYA supplies vdda_usb1, vdda_usb2, vdda_sata, vdda_usb3
LDO4/VDDA_1V8_PHYB supplies vdda_pcie1, vdda_pcie0, vdda_hdmi, vdda_pcie
NOTE: We break compatibility with pre-production boards with this change
since, the PMIC LDO4 is disabled at OTP level.
The new configuration is the plan of record and all pre-production
boards are supposed to be replaced with the latest boards matching the
mentioned configuration.
Some very few 10 something boards have been created and
stopped production till the latest modifications were done (PMIC USB
interrupt, LDO4 etc) - and all of those boards are now getting
scrapped.. If there are any (as per tracking information, there should
not be any), TI should be contacted to have them replaced.
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated commit about these being TI internal protos]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-03 13:23:45 -06:00
|
|
|
/* VDDA_1V8_PHYA */
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
regulator-name = "ldo3";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: am57xx-beagle-x15: Update Phy supplies
Originally, all the SoC PHY rails were supplied by LDO3. However, as a
result of characterization, it was determined that this posed a risk in
extreme load conditions. Hence the PHY rails are split between two
different LDOs. Update the related node as a result
LDO3/VDDA_1V8_PHYA supplies vdda_usb1, vdda_usb2, vdda_sata, vdda_usb3
LDO4/VDDA_1V8_PHYB supplies vdda_pcie1, vdda_pcie0, vdda_hdmi, vdda_pcie
NOTE: We break compatibility with pre-production boards with this change
since, the PMIC LDO4 is disabled at OTP level.
The new configuration is the plan of record and all pre-production
boards are supposed to be replaced with the latest boards matching the
mentioned configuration.
Some very few 10 something boards have been created and
stopped production till the latest modifications were done (PMIC USB
interrupt, LDO4 etc) - and all of those boards are now getting
scrapped.. If there are any (as per tracking information, there should
not be any), TI should be contacted to have them replaced.
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated commit about these being TI internal protos]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-03 13:23:45 -06:00
|
|
|
ldo4_reg: ldo4 {
|
|
|
|
|
/* VDDA_1V8_PHYB */
|
|
|
|
|
regulator-name = "ldo4";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
ldo9_reg: ldo9 {
|
|
|
|
|
/* VDD_RTC */
|
|
|
|
|
regulator-name = "ldo9";
|
|
|
|
|
regulator-min-microvolt = <1050000>;
|
|
|
|
|
regulator-max-microvolt = <1050000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldoln_reg: ldoln {
|
|
|
|
|
/* VDDA_1V8_PLL */
|
|
|
|
|
regulator-name = "ldoln";
|
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ldousb_reg: ldousb {
|
|
|
|
|
/* VDDA_3V_USB: VDDA_USBHS33 */
|
|
|
|
|
regulator-name = "ldousb";
|
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
regen1: regen1 {
|
|
|
|
|
/* VDD_3V3_ON */
|
|
|
|
|
regulator-name = "regen1";
|
|
|
|
|
regulator-boot-on;
|
|
|
|
|
regulator-always-on;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
tps659038_rtc: tps659038_rtc {
|
|
|
|
|
compatible = "ti,palmas-rtc";
|
|
|
|
|
interrupt-parent = <&tps659038>;
|
|
|
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
|
wakeup-source;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
tps659038_pwr_button: tps659038_pwr_button {
|
|
|
|
|
compatible = "ti,palmas-pwrbutton";
|
|
|
|
|
interrupt-parent = <&tps659038>;
|
|
|
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
|
wakeup-source;
|
|
|
|
|
ti,palmas-long-press-seconds = <12>;
|
|
|
|
|
};
|
2015-01-05 09:32:29 -07:00
|
|
|
|
|
|
|
|
tps659038_gpio: tps659038_gpio {
|
|
|
|
|
compatible = "ti,palmas-gpio";
|
|
|
|
|
gpio-controller;
|
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
};
|
2015-07-27 07:10:17 -06:00
|
|
|
|
|
|
|
|
extcon_usb2: tps659038_usb {
|
|
|
|
|
compatible = "ti,palmas-usb-vid";
|
|
|
|
|
ti,enable-vbus-detection;
|
|
|
|
|
ti,enable-id-detection;
|
|
|
|
|
id-gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
tmp102: tmp102@48 {
|
|
|
|
|
compatible = "ti,tmp102";
|
|
|
|
|
reg = <0x48>;
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&tmp102_pins_default>;
|
|
|
|
|
interrupt-parent = <&gpio7>;
|
|
|
|
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
2015-03-23 13:39:39 -06:00
|
|
|
#thermal-sensor-cells = <1>;
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
2015-08-24 01:20:07 -06:00
|
|
|
|
|
|
|
|
tlv320aic3104: tlv320aic3104@18 {
|
|
|
|
|
#sound-dai-cells = <0>;
|
|
|
|
|
compatible = "ti,tlv320aic3104";
|
|
|
|
|
reg = <0x18>;
|
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
|
pinctrl-0 = <&clkout2_pins_default>;
|
|
|
|
|
pinctrl-1 = <&clkout2_pins_sleep>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
adc-settle-ms = <40>;
|
|
|
|
|
|
|
|
|
|
AVDD-supply = <&vdd_3v3>;
|
|
|
|
|
IOVDD-supply = <&vdd_3v3>;
|
|
|
|
|
DRVDD-supply = <&vdd_3v3>;
|
|
|
|
|
DVDD-supply = <&aic_dvdd>;
|
|
|
|
|
};
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&i2c3 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&i2c3_pins_default>;
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
|
|
|
|
|
mcp_rtc: rtc@6f {
|
|
|
|
|
compatible = "microchip,mcp7941x";
|
|
|
|
|
reg = <0x6f>;
|
2015-09-03 13:24:00 -06:00
|
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
|
|
|
|
|
<&dra7_pmx_core 0x424>;
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&mcp79410_pins_default>;
|
|
|
|
|
|
|
|
|
|
vcc-supply = <&vdd_3v3>;
|
|
|
|
|
wakeup-source;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&gpio7 {
|
|
|
|
|
ti,no-reset-on-init;
|
|
|
|
|
ti,no-idle-on-init;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpu0 {
|
|
|
|
|
cpu0-supply = <&smps12_reg>;
|
|
|
|
|
voltage-tolerance = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&uart3 {
|
|
|
|
|
status = "okay";
|
2015-03-11 09:43:44 -06:00
|
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
2015-04-08 16:40:59 -06:00
|
|
|
<&dra7_pmx_core 0x3f8>;
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&uart3_pins_default>;
|
|
|
|
|
};
|
|
|
|
|
|
2014-12-04 14:02:57 -07:00
|
|
|
&mac {
|
|
|
|
|
status = "okay";
|
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
|
pinctrl-0 = <&cpsw_pins_default>;
|
|
|
|
|
pinctrl-1 = <&cpsw_pins_sleep>;
|
|
|
|
|
dual_emac;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpsw_emac0 {
|
|
|
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
|
|
|
phy-mode = "rgmii";
|
|
|
|
|
dual_emac_res_vlan = <1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpsw_emac1 {
|
|
|
|
|
phy_id = <&davinci_mdio>, <2>;
|
|
|
|
|
phy-mode = "rgmii";
|
|
|
|
|
dual_emac_res_vlan = <2>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&davinci_mdio {
|
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
|
pinctrl-0 = <&davinci_mdio_pins_default>;
|
|
|
|
|
pinctrl-1 = <&davinci_mdio_pins_sleep>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
&mmc1 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
|
|
|
|
|
|
|
|
vmmc-supply = <&ldo1_reg>;
|
|
|
|
|
bus-width = <4>;
|
2015-10-12 03:07:12 -06:00
|
|
|
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&mmc2 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&mmc2_pins_default>;
|
|
|
|
|
|
|
|
|
|
vmmc-supply = <&vdd_3v3>;
|
|
|
|
|
bus-width = <8>;
|
|
|
|
|
ti,non-removable;
|
|
|
|
|
cap-mmc-dual-data-rate;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&sata {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&usb2_phy1 {
|
|
|
|
|
phy-supply = <&ldousb_reg>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-06-17 08:52:43 -06:00
|
|
|
&usb2_phy2 {
|
|
|
|
|
phy-supply = <&ldousb_reg>;
|
|
|
|
|
};
|
|
|
|
|
|
ARM: dts: Add am57xx-beagle-x15
BeagleBoard-X15 is the next generation Open Source Hardware
BeagleBoard based on TI's AM5728 SoC featuring dual core 1.5GHz A15
processor. The platform features 2GB DDR3L (w/dual 32bit busses),
eSATA, 3 USB3.0 ports, integrated HDMI (1920x1080@60), separate LCD
port, video In port, 4GB eMMC, uSD, Analog audio in/out, dual 1G
Ethernet.
For more information, refer to:
BeagleBoard-X15 Wiki:
http://www.elinux.org/Beagleboard:BeagleBoard-X15
AM5728 is part of the Sitara product family whose additional details
will be available: http://www.ti.com/lsds/ti/arm/overview.page
Technical Reference Manual for AM5728 is public domain at:
http://www.ti.com/lit/spruhz6
Just add basic support for the moment, the following updates are needed:
i) Ethernet - depends on SoC dts fixes
ii) USB Client (USB2) - depends on GPIO extcon
ii) HDMI - additional driver fixes pending
iii) Audio - additional driver fixes pending
NOTE:
AM5728 Data Manual (SPRS915L - August 2014) section 4.1.1 states: "All
unused power supply balls must be supplied with the voltages specified
in the Section 5.2, Recommended Operating Conditions". This implies
that all unused voltage rails for AM5728 can never be switched off even
if the hardware blocks inside that voltage domain is unused. Switching
off these unused rails may result in stability issues on other domains
and increased leakage and power-on-hour impacts.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-07 10:47:13 -07:00
|
|
|
&usb1 {
|
|
|
|
|
dr_mode = "host";
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&usb1_pins>;
|
|
|
|
|
};
|
2015-01-26 05:15:30 -07:00
|
|
|
|
2015-03-17 03:43:51 -06:00
|
|
|
&omap_dwc3_1 {
|
|
|
|
|
extcon = <&extcon_usb1>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&omap_dwc3_2 {
|
|
|
|
|
extcon = <&extcon_usb2>;
|
|
|
|
|
};
|
|
|
|
|
|
2015-01-26 05:15:31 -07:00
|
|
|
&usb2 {
|
2015-07-27 07:10:17 -06:00
|
|
|
/*
|
|
|
|
|
* Stand alone usage is peripheral only.
|
|
|
|
|
* However, with some resistor modifications
|
|
|
|
|
* this port can be used via expansion connectors
|
|
|
|
|
* as "host" or "dual-role". If so, provide
|
|
|
|
|
* the necessary dr_mode override in the expansion
|
|
|
|
|
* board's DT.
|
|
|
|
|
*/
|
2015-01-26 05:15:31 -07:00
|
|
|
dr_mode = "peripheral";
|
|
|
|
|
};
|
2015-03-23 13:39:39 -06:00
|
|
|
|
|
|
|
|
&cpu_trips {
|
|
|
|
|
cpu_alert1: cpu_alert1 {
|
|
|
|
|
temperature = <50000>; /* millicelsius */
|
|
|
|
|
hysteresis = <2000>; /* millicelsius */
|
|
|
|
|
type = "active";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&cpu_cooling_maps {
|
|
|
|
|
map1 {
|
|
|
|
|
trip = <&cpu_alert1>;
|
|
|
|
|
cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&thermal_zones {
|
|
|
|
|
board_thermal: board_thermal {
|
|
|
|
|
polling-delay-passive = <1250>; /* milliseconds */
|
|
|
|
|
polling-delay = <1500>; /* milliseconds */
|
|
|
|
|
|
|
|
|
|
/* sensor ID */
|
|
|
|
|
thermal-sensors = <&tmp102 0>;
|
|
|
|
|
|
|
|
|
|
board_trips: trips {
|
|
|
|
|
board_alert0: board_alert {
|
|
|
|
|
temperature = <40000>; /* millicelsius */
|
|
|
|
|
hysteresis = <2000>; /* millicelsius */
|
|
|
|
|
type = "active";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
board_crit: board_crit {
|
|
|
|
|
temperature = <105000>; /* millicelsius */
|
|
|
|
|
hysteresis = <0>; /* millicelsius */
|
|
|
|
|
type = "critical";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
board_cooling_maps: cooling-maps {
|
|
|
|
|
map0 {
|
|
|
|
|
trip = <&board_alert0>;
|
|
|
|
|
cooling-device =
|
|
|
|
|
<&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
2015-02-12 03:23:10 -07:00
|
|
|
|
|
|
|
|
&dss {
|
|
|
|
|
status = "ok";
|
|
|
|
|
|
|
|
|
|
vdda_video-supply = <&ldoln_reg>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&hdmi {
|
|
|
|
|
status = "ok";
|
ARM: dts: am57xx-beagle-x15: Update Phy supplies
Originally, all the SoC PHY rails were supplied by LDO3. However, as a
result of characterization, it was determined that this posed a risk in
extreme load conditions. Hence the PHY rails are split between two
different LDOs. Update the related node as a result
LDO3/VDDA_1V8_PHYA supplies vdda_usb1, vdda_usb2, vdda_sata, vdda_usb3
LDO4/VDDA_1V8_PHYB supplies vdda_pcie1, vdda_pcie0, vdda_hdmi, vdda_pcie
NOTE: We break compatibility with pre-production boards with this change
since, the PMIC LDO4 is disabled at OTP level.
The new configuration is the plan of record and all pre-production
boards are supposed to be replaced with the latest boards matching the
mentioned configuration.
Some very few 10 something boards have been created and
stopped production till the latest modifications were done (PMIC USB
interrupt, LDO4 etc) - and all of those boards are now getting
scrapped.. If there are any (as per tracking information, there should
not be any), TI should be contacted to have them replaced.
Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated commit about these being TI internal protos]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-03 13:23:45 -06:00
|
|
|
vdda-supply = <&ldo4_reg>;
|
2015-02-12 03:23:10 -07:00
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
pinctrl-0 = <&hdmi_pins>;
|
|
|
|
|
|
|
|
|
|
port {
|
|
|
|
|
hdmi_out: endpoint {
|
|
|
|
|
remote-endpoint = <&tpd12s015_in>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
2015-07-28 07:39:10 -06:00
|
|
|
|
|
|
|
|
&pcie1 {
|
|
|
|
|
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
|
|
|
|
|
};
|
2015-08-24 01:20:07 -06:00
|
|
|
|
|
|
|
|
&mcasp3 {
|
|
|
|
|
#sound-dai-cells = <0>;
|
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
|
pinctrl-0 = <&mcasp3_pins_default>;
|
|
|
|
|
pinctrl-1 = <&mcasp3_pins_sleep>;
|
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
|
|
op-mode = <0>; /* MCASP_IIS_MODE */
|
|
|
|
|
tdm-slots = <2>;
|
|
|
|
|
/* 4 serializers */
|
|
|
|
|
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
|
|
|
|
1 2 0 0
|
|
|
|
|
>;
|
|
|
|
|
};
|
2015-09-18 12:16:34 -06:00
|
|
|
|
|
|
|
|
&mailbox5 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&mailbox6 {
|
|
|
|
|
status = "okay";
|
|
|
|
|
mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
|
|
|
|
|
status = "okay";
|
|
|
|
|
};
|
|
|
|
|
};
|