redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/clk/bcm/clk-kona-setup.c

864 lines
21 KiB
C
Raw Normal View History

clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
/*
* Copyright (C) 2013 Broadcom Corporation
* Copyright 2013 Linaro Limited
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/io.h>
#include <linux/of_address.h>
#include "clk-kona.h"
/* These are used when a selector or trigger is found to be unneeded */
#define selector_clear_exists(sel) ((sel)->width = 0)
#define trigger_clear_exists(trig) FLAG_CLEAR(trig, TRIG, EXISTS)
/* Validity checking */
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
static bool ccu_data_offsets_valid(struct ccu_data *ccu)
{
struct ccu_policy *ccu_policy = &ccu->policy;
u32 limit;
limit = ccu->range - sizeof(u32);
limit = round_down(limit, sizeof(u32));
if (ccu_policy_exists(ccu_policy)) {
if (ccu_policy->enable.offset > limit) {
pr_err("%s: bad policy enable offset for %s "
"(%u > %u)\n", __func__,
ccu->name, ccu_policy->enable.offset, limit);
return false;
}
if (ccu_policy->control.offset > limit) {
pr_err("%s: bad policy control offset for %s "
"(%u > %u)\n", __func__,
ccu->name, ccu_policy->control.offset, limit);
return false;
}
}
return true;
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
static bool clk_requires_trigger(struct kona_clk *bcm_clk)
{
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
struct peri_clk_data *peri = bcm_clk->u.peri;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
struct bcm_clk_sel *sel;
struct bcm_clk_div *div;
if (bcm_clk->type != bcm_clk_peri)
return false;
sel = &peri->sel;
if (sel->parent_count && selector_exists(sel))
return true;
div = &peri->div;
if (!divider_exists(div))
return false;
/* Fixed dividers don't need triggers */
if (!divider_is_fixed(div))
return true;
div = &peri->pre_div;
return divider_exists(div) && !divider_is_fixed(div);
}
static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
{
struct peri_clk_data *peri;
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
struct bcm_clk_policy *policy;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
struct bcm_clk_gate *gate;
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:43 -06:00
struct bcm_clk_hyst *hyst;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
struct bcm_clk_div *div;
struct bcm_clk_sel *sel;
struct bcm_clk_trig *trig;
const char *name;
u32 range;
u32 limit;
BUG_ON(bcm_clk->type != bcm_clk_peri);
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
peri = bcm_clk->u.peri;
clk: bcm281xx: use init_data.name for clock name Use the init_data.name field to hold the name of a Kona clock rather than duplicating it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:38 -06:00
name = bcm_clk->init_data.name;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
range = bcm_clk->ccu->range;
limit = range - sizeof(u32);
limit = round_down(limit, sizeof(u32));
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
policy = &peri->policy;
if (policy_exists(policy)) {
if (policy->offset > limit) {
pr_err("%s: bad policy offset for %s (%u > %u)\n",
__func__, name, policy->offset, limit);
return false;
}
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
gate = &peri->gate;
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:43 -06:00
hyst = &peri->hyst;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
if (gate_exists(gate)) {
if (gate->offset > limit) {
pr_err("%s: bad gate offset for %s (%u > %u)\n",
__func__, name, gate->offset, limit);
return false;
}
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:43 -06:00
if (hyst_exists(hyst)) {
if (hyst->offset > limit) {
pr_err("%s: bad hysteresis offset for %s "
"(%u > %u)\n", __func__,
name, hyst->offset, limit);
return false;
}
}
} else if (hyst_exists(hyst)) {
pr_err("%s: hysteresis but no gate for %s\n", __func__, name);
return false;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
}
div = &peri->div;
if (divider_exists(div)) {
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
if (div->u.s.offset > limit) {
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
pr_err("%s: bad divider offset for %s (%u > %u)\n",
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
__func__, name, div->u.s.offset, limit);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return false;
}
}
div = &peri->pre_div;
if (divider_exists(div)) {
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
if (div->u.s.offset > limit) {
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
pr_err("%s: bad pre-divider offset for %s "
"(%u > %u)\n",
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
__func__, name, div->u.s.offset, limit);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return false;
}
}
sel = &peri->sel;
if (selector_exists(sel)) {
if (sel->offset > limit) {
pr_err("%s: bad selector offset for %s (%u > %u)\n",
__func__, name, sel->offset, limit);
return false;
}
}
trig = &peri->trig;
if (trigger_exists(trig)) {
if (trig->offset > limit) {
pr_err("%s: bad trigger offset for %s (%u > %u)\n",
__func__, name, trig->offset, limit);
return false;
}
}
trig = &peri->pre_trig;
if (trigger_exists(trig)) {
if (trig->offset > limit) {
pr_err("%s: bad pre-trigger offset for %s (%u > %u)\n",
__func__, name, trig->offset, limit);
return false;
}
}
return true;
}
/* A bit position must be less than the number of bits in a 32-bit register. */
static bool bit_posn_valid(u32 bit_posn, const char *field_name,
const char *clock_name)
{
u32 limit = BITS_PER_BYTE * sizeof(u32) - 1;
if (bit_posn > limit) {
pr_err("%s: bad %s bit for %s (%u > %u)\n", __func__,
field_name, clock_name, bit_posn, limit);
return false;
}
return true;
}
/*
* A bitfield must be at least 1 bit wide. Both the low-order and
* high-order bits must lie within a 32-bit register. We require
* fields to be less than 32 bits wide, mainly because we use
* shifting to produce field masks, and shifting a full word width
* is not well-defined by the C standard.
*/
static bool bitfield_valid(u32 shift, u32 width, const char *field_name,
const char *clock_name)
{
u32 limit = BITS_PER_BYTE * sizeof(u32);
if (!width) {
pr_err("%s: bad %s field width 0 for %s\n", __func__,
field_name, clock_name);
return false;
}
if (shift + width > limit) {
pr_err("%s: bad %s for %s (%u + %u > %u)\n", __func__,
field_name, clock_name, shift, width, limit);
return false;
}
return true;
}
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
static bool
ccu_policy_valid(struct ccu_policy *ccu_policy, const char *ccu_name)
{
struct bcm_lvm_en *enable = &ccu_policy->enable;
struct bcm_policy_ctl *control;
if (!bit_posn_valid(enable->bit, "policy enable", ccu_name))
return false;
control = &ccu_policy->control;
if (!bit_posn_valid(control->go_bit, "policy control GO", ccu_name))
return false;
if (!bit_posn_valid(control->atl_bit, "policy control ATL", ccu_name))
return false;
if (!bit_posn_valid(control->ac_bit, "policy control AC", ccu_name))
return false;
return true;
}
static bool policy_valid(struct bcm_clk_policy *policy, const char *clock_name)
{
if (!bit_posn_valid(policy->bit, "policy", clock_name))
return false;
return true;
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
/*
* All gates, if defined, have a status bit, and for hardware-only
* gates, that's it. Gates that can be software controlled also
* have an enable bit. And a gate that can be hardware or software
* controlled will have a hardware/software select bit.
*/
static bool gate_valid(struct bcm_clk_gate *gate, const char *field_name,
const char *clock_name)
{
if (!bit_posn_valid(gate->status_bit, "gate status", clock_name))
return false;
if (gate_is_sw_controllable(gate)) {
if (!bit_posn_valid(gate->en_bit, "gate enable", clock_name))
return false;
if (gate_is_hw_controllable(gate)) {
if (!bit_posn_valid(gate->hw_sw_sel_bit,
"gate hw/sw select",
clock_name))
return false;
}
} else {
BUG_ON(!gate_is_hw_controllable(gate));
}
return true;
}
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:43 -06:00
static bool hyst_valid(struct bcm_clk_hyst *hyst, const char *clock_name)
{
if (!bit_posn_valid(hyst->en_bit, "hysteresis enable", clock_name))
return false;
if (!bit_posn_valid(hyst->val_bit, "hysteresis value", clock_name))
return false;
return true;
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
/*
* A selector bitfield must be valid. Its parent_sel array must
* also be reasonable for the field.
*/
static bool sel_valid(struct bcm_clk_sel *sel, const char *field_name,
const char *clock_name)
{
if (!bitfield_valid(sel->shift, sel->width, field_name, clock_name))
return false;
if (sel->parent_count) {
u32 max_sel;
u32 limit;
/*
* Make sure the selector field can hold all the
* selector values we expect to be able to use. A
* clock only needs to have a selector defined if it
* has more than one parent. And in that case the
* highest selector value will be in the last entry
* in the array.
*/
max_sel = sel->parent_sel[sel->parent_count - 1];
limit = (1 << sel->width) - 1;
if (max_sel > limit) {
pr_err("%s: bad selector for %s "
"(%u needs > %u bits)\n",
__func__, clock_name, max_sel,
sel->width);
return false;
}
} else {
pr_warn("%s: ignoring selector for %s (no parents)\n",
__func__, clock_name);
selector_clear_exists(sel);
kfree(sel->parent_sel);
sel->parent_sel = NULL;
}
return true;
}
/*
* A fixed divider just needs to be non-zero. A variable divider
* has to have a valid divider bitfield, and if it has a fraction,
* the width of the fraction must not be no more than the width of
* the divider as a whole.
*/
static bool div_valid(struct bcm_clk_div *div, const char *field_name,
const char *clock_name)
{
if (divider_is_fixed(div)) {
/* Any fixed divider value but 0 is OK */
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
if (div->u.fixed == 0) {
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
pr_err("%s: bad %s fixed value 0 for %s\n", __func__,
field_name, clock_name);
return false;
}
return true;
}
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
if (!bitfield_valid(div->u.s.shift, div->u.s.width,
field_name, clock_name))
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return false;
if (divider_has_fraction(div))
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
if (div->u.s.frac_width > div->u.s.width) {
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
pr_warn("%s: bad %s fraction width for %s (%u > %u)\n",
__func__, field_name, clock_name,
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
div->u.s.frac_width, div->u.s.width);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return false;
}
return true;
}
/*
* If a clock has two dividers, the combined number of fractional
* bits must be representable in a 32-bit unsigned value. This
* is because we scale up a dividend using both dividers before
* dividing to improve accuracy, and we need to avoid overflow.
*/
static bool kona_dividers_valid(struct kona_clk *bcm_clk)
{
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
struct peri_clk_data *peri = bcm_clk->u.peri;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
struct bcm_clk_div *div;
struct bcm_clk_div *pre_div;
u32 limit;
BUG_ON(bcm_clk->type != bcm_clk_peri);
if (!divider_exists(&peri->div) || !divider_exists(&peri->pre_div))
return true;
div = &peri->div;
pre_div = &peri->pre_div;
if (divider_is_fixed(div) || divider_is_fixed(pre_div))
return true;
limit = BITS_PER_BYTE * sizeof(u32);
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
return div->u.s.frac_width + pre_div->u.s.frac_width <= limit;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
}
/* A trigger just needs to represent a valid bit position */
static bool trig_valid(struct bcm_clk_trig *trig, const char *field_name,
const char *clock_name)
{
return bit_posn_valid(trig->bit, field_name, clock_name);
}
/* Determine whether the set of peripheral clock registers are valid. */
static bool
peri_clk_data_valid(struct kona_clk *bcm_clk)
{
struct peri_clk_data *peri;
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
struct bcm_clk_policy *policy;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
struct bcm_clk_gate *gate;
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:43 -06:00
struct bcm_clk_hyst *hyst;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
struct bcm_clk_sel *sel;
struct bcm_clk_div *div;
struct bcm_clk_div *pre_div;
struct bcm_clk_trig *trig;
const char *name;
BUG_ON(bcm_clk->type != bcm_clk_peri);
/*
* First validate register offsets. This is the only place
* where we need something from the ccu, so we do these
* together.
*/
if (!peri_clk_data_offsets_valid(bcm_clk))
return false;
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
peri = bcm_clk->u.peri;
clk: bcm281xx: use init_data.name for clock name Use the init_data.name field to hold the name of a Kona clock rather than duplicating it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:38 -06:00
name = bcm_clk->init_data.name;
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
policy = &peri->policy;
if (policy_exists(policy) && !policy_valid(policy, name))
return false;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
gate = &peri->gate;
if (gate_exists(gate) && !gate_valid(gate, "gate", name))
return false;
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:43 -06:00
hyst = &peri->hyst;
if (hyst_exists(hyst) && !hyst_valid(hyst, name))
return false;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
sel = &peri->sel;
if (selector_exists(sel)) {
if (!sel_valid(sel, "selector", name))
return false;
} else if (sel->parent_count > 1) {
pr_err("%s: multiple parents but no selector for %s\n",
__func__, name);
return false;
}
div = &peri->div;
pre_div = &peri->pre_div;
if (divider_exists(div)) {
if (!div_valid(div, "divider", name))
return false;
if (divider_exists(pre_div))
if (!div_valid(pre_div, "pre-divider", name))
return false;
} else if (divider_exists(pre_div)) {
pr_err("%s: pre-divider but no divider for %s\n", __func__,
name);
return false;
}
trig = &peri->trig;
if (trigger_exists(trig)) {
if (!trig_valid(trig, "trigger", name))
return false;
if (trigger_exists(&peri->pre_trig)) {
if (!trig_valid(trig, "pre-trigger", name)) {
return false;
}
}
if (!clk_requires_trigger(bcm_clk)) {
pr_warn("%s: ignoring trigger for %s (not needed)\n",
__func__, name);
trigger_clear_exists(trig);
}
} else if (trigger_exists(&peri->pre_trig)) {
pr_err("%s: pre-trigger but no trigger for %s\n", __func__,
name);
return false;
} else if (clk_requires_trigger(bcm_clk)) {
pr_err("%s: required trigger missing for %s\n", __func__,
name);
return false;
}
return kona_dividers_valid(bcm_clk);
}
static bool kona_clk_valid(struct kona_clk *bcm_clk)
{
switch (bcm_clk->type) {
case bcm_clk_peri:
if (!peri_clk_data_valid(bcm_clk))
return false;
break;
default:
pr_err("%s: unrecognized clock type (%d)\n", __func__,
(int)bcm_clk->type);
return false;
}
return true;
}
/*
* Scan an array of parent clock names to determine whether there
* are any entries containing BAD_CLK_NAME. Such entries are
* placeholders for non-supported clocks. Keep track of the
* position of each clock name in the original array.
*
* Allocates an array of pointers to to hold the names of all
* non-null entries in the original array, and returns a pointer to
* that array in *names. This will be used for registering the
* clock with the common clock code. On successful return,
* *count indicates how many entries are in that names array.
*
* If there is more than one entry in the resulting names array,
* another array is allocated to record the parent selector value
* for each (defined) parent clock. This is the value that
* represents this parent clock in the clock's source selector
* register. The position of the clock in the original parent array
* defines that selector value. The number of entries in this array
* is the same as the number of entries in the parent names array.
*
* The array of selector values is returned. If the clock has no
* parents, no selector is required and a null pointer is returned.
*
* Returns a null pointer if the clock names array supplied was
* null. (This is not an error.)
*
* Returns a pointer-coded error if an error occurs.
*/
static u32 *parent_process(const char *clocks[],
u32 *count, const char ***names)
{
static const char **parent_names;
static u32 *parent_sel;
const char **clock;
u32 parent_count;
u32 bad_count = 0;
u32 orig_count;
u32 i;
u32 j;
*count = 0; /* In case of early return */
*names = NULL;
if (!clocks)
return NULL;
/*
* Count the number of names in the null-terminated array,
* and find out how many of those are actually clock names.
*/
for (clock = clocks; *clock; clock++)
if (*clock == BAD_CLK_NAME)
bad_count++;
orig_count = (u32)(clock - clocks);
parent_count = orig_count - bad_count;
/* If all clocks are unsupported, we treat it as no clock */
if (!parent_count)
return NULL;
/* Avoid exceeding our parent clock limit */
if (parent_count > PARENT_COUNT_MAX) {
pr_err("%s: too many parents (%u > %u)\n", __func__,
parent_count, PARENT_COUNT_MAX);
return ERR_PTR(-EINVAL);
}
/*
* There is one parent name for each defined parent clock.
* We also maintain an array containing the selector value
* for each defined clock. If there's only one clock, the
* selector is not required, but we allocate space for the
* array anyway to keep things simple.
*/
clk: bcm/kona: Do not use sizeof on pointer type When sizeof is applied to a pointer typed expression, it gives the size of the pointer. So, here do not use sizeof on pointer type. Also, silent checkpatch.pl by using kmalloc_array over kmalloc. Note that this has no effect on runtime because 'parent_names' is a pointer to a pointer. Problem found using Coccinelle. Signed-off-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-04-28 07:50:33 -06:00
parent_names = kmalloc_array(parent_count, sizeof(*parent_names),
GFP_KERNEL);
clk: kona-setup: Delete error messages for failed memory allocations Omit extra messages for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-09-26 08:54:20 -06:00
if (!parent_names)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return ERR_PTR(-ENOMEM);
/* There is at least one parent, so allocate a selector array */
clk-kona-setup: Use kmalloc_array() in parent_process() A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Alex Elder <elder@linaro.org> [sboyd@codeaurora.org: Save a line] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14 12:26:05 -06:00
parent_sel = kmalloc_array(parent_count, sizeof(*parent_sel),
GFP_KERNEL);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
if (!parent_sel) {
kfree(parent_names);
return ERR_PTR(-ENOMEM);
}
/* Now fill in the parent names and selector arrays */
for (i = 0, j = 0; i < orig_count; i++) {
if (clocks[i] != BAD_CLK_NAME) {
parent_names[j] = clocks[i];
parent_sel[j] = i;
j++;
}
}
*names = parent_names;
*count = parent_count;
return parent_sel;
}
static int
clk_sel_setup(const char **clocks, struct bcm_clk_sel *sel,
struct clk_init_data *init_data)
{
const char **parent_names = NULL;
u32 parent_count = 0;
u32 *parent_sel;
/*
* If a peripheral clock has multiple parents, the value
* used by the hardware to select that parent is represented
* by the parent clock's position in the "clocks" list. Some
* values don't have defined or supported clocks; these will
* have BAD_CLK_NAME entries in the parents[] array. The
* list is terminated by a NULL entry.
*
* We need to supply (only) the names of defined parent
* clocks when registering a clock though, so we use an
* array of parent selector values to map between the
* indexes the common clock code uses and the selector
* values we need.
*/
parent_sel = parent_process(clocks, &parent_count, &parent_names);
if (IS_ERR(parent_sel)) {
int ret = PTR_ERR(parent_sel);
pr_err("%s: error processing parent clocks for %s (%d)\n",
__func__, init_data->name, ret);
return ret;
}
init_data->parent_names = parent_names;
init_data->num_parents = parent_count;
sel->parent_count = parent_count;
sel->parent_sel = parent_sel;
return 0;
}
static void clk_sel_teardown(struct bcm_clk_sel *sel,
struct clk_init_data *init_data)
{
kfree(sel->parent_sel);
sel->parent_sel = NULL;
sel->parent_count = 0;
init_data->num_parents = 0;
kfree(init_data->parent_names);
init_data->parent_names = NULL;
}
static void peri_clk_teardown(struct peri_clk_data *data,
struct clk_init_data *init_data)
{
clk_sel_teardown(&data->sel, init_data);
}
/*
* Caller is responsible for freeing the parent_names[] and
* parent_sel[] arrays in the peripheral clock's "data" structure
* that can be assigned if the clock has one or more parent clocks
* associated with it.
*/
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
static int
peri_clk_setup(struct peri_clk_data *data, struct clk_init_data *init_data)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
{
clk: bcm281xx: don't disable unused peripheral clocks Add the CLK_IGNORE_UNUSED flag when setting up a peripheral clock. This prevents unused clocks from getting disabled, and by doing this we can use the common clock code even before we've resolved all the spots that need to get a reference to their clock. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:19 -07:00
init_data->flags = CLK_IGNORE_UNUSED;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return clk_sel_setup(data->clocks, &data->sel, init_data);
}
static void bcm_clk_teardown(struct kona_clk *bcm_clk)
{
switch (bcm_clk->type) {
case bcm_clk_peri:
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
peri_clk_teardown(bcm_clk->u.data, &bcm_clk->init_data);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
break;
default:
break;
}
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 07:22:12 -06:00
bcm_clk->u.data = NULL;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
bcm_clk->type = bcm_clk_none;
}
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
static void kona_clk_teardown(struct clk_hw *hw)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
{
struct kona_clk *bcm_clk;
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
if (!hw)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return;
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
clk_hw_unregister(hw);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
bcm_clk = to_kona_clk(hw);
bcm_clk_teardown(bcm_clk);
}
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
static int kona_clk_setup(struct kona_clk *bcm_clk)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
{
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
int ret;
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
struct clk_init_data *init_data = &bcm_clk->init_data;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
switch (bcm_clk->type) {
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
case bcm_clk_peri:
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
ret = peri_clk_setup(bcm_clk->u.data, init_data);
if (ret)
return ret;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
break;
default:
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
pr_err("%s: clock type %d invalid for %s\n", __func__,
(int)bcm_clk->type, init_data->name);
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
return -EINVAL;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
}
/* Make sure everything makes sense before we set it up */
if (!kona_clk_valid(bcm_clk)) {
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
pr_err("%s: clock data invalid for %s\n", __func__,
init_data->name);
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
ret = -EINVAL;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
goto out_teardown;
}
bcm_clk->hw.init = init_data;
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
ret = clk_hw_register(NULL, &bcm_clk->hw);
if (ret) {
pr_err("%s: error registering clock %s (%d)\n", __func__,
init_data->name, ret);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
goto out_teardown;
}
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
return 0;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
out_teardown:
bcm_clk_teardown(bcm_clk);
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
return ret;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
}
static void ccu_clks_teardown(struct ccu_data *ccu)
{
u32 i;
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
for (i = 0; i < ccu->clk_num; i++)
kona_clk_teardown(&ccu->kona_clks[i].hw);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
}
static void kona_ccu_teardown(struct ccu_data *ccu)
{
if (!ccu->base)
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:40 -06:00
return;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
of_clk_del_provider(ccu->node); /* safe if never added */
ccu_clks_teardown(ccu);
of_node_put(ccu->node);
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:40 -06:00
ccu->node = NULL;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
iounmap(ccu->base);
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:40 -06:00
ccu->base = NULL;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
}
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
static bool ccu_data_valid(struct ccu_data *ccu)
{
struct ccu_policy *ccu_policy;
if (!ccu_data_offsets_valid(ccu))
return false;
ccu_policy = &ccu->policy;
if (ccu_policy_exists(ccu_policy))
if (!ccu_policy_valid(ccu_policy, ccu->name))
return false;
return true;
}
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
static struct clk_hw *
of_clk_kona_onecell_get(struct of_phandle_args *clkspec, void *data)
{
struct ccu_data *ccu = data;
unsigned int idx = clkspec->args[0];
if (idx >= ccu->clk_num) {
pr_err("%s: invalid index %u\n", __func__, idx);
return ERR_PTR(-EINVAL);
}
return &ccu->kona_clks[idx].hw;
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
/*
* Set up a CCU. Call the provided ccu_clks_setup callback to
* initialize the array of clocks provided by the CCU.
*/
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:40 -06:00
void __init kona_dt_ccu_setup(struct ccu_data *ccu,
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
struct device_node *node)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
{
struct resource res = { 0 };
resource_size_t range;
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
unsigned int i;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
int ret;
ret = of_address_to_resource(node, 0, &res);
if (ret) {
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-28 09:44:29 -06:00
pr_err("%s: no valid CCU registers found for %pOFn\n", __func__,
node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
goto out_err;
}
range = resource_size(&res);
if (range > (resource_size_t)U32_MAX) {
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-28 09:44:29 -06:00
pr_err("%s: address range too large for %pOFn\n", __func__,
node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
goto out_err;
}
ccu->range = (u32)range;
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
if (!ccu_data_valid(ccu)) {
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-28 09:44:29 -06:00
pr_err("%s: ccu data not valid for %pOFn\n", __func__, node);
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:42 -06:00
goto out_err;
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
ccu->base = ioremap(res.start, ccu->range);
if (!ccu->base) {
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-28 09:44:29 -06:00
pr_err("%s: unable to map CCU registers for %pOFn\n", __func__,
node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
goto out_err;
}
ccu->node = of_node_get(node);
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
/*
* Set up each defined kona clock and save the result in
* the clock framework clock array (in ccu->data). Then
* register as a provider for these clocks.
*/
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
for (i = 0; i < ccu->clk_num; i++) {
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
if (!ccu->kona_clks[i].ccu)
continue;
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
kona_clk_setup(&ccu->kona_clks[i]);
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-21 15:11:41 -06:00
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
clk: bcm: kona: Migrate to clk_hw based registration and OF APIs Now that we can use clk_hw pointers we don't need to have two duplicate arrays holding the same mapping of clk index to clk_hw pointer. Implement a custom clk_hw provider function to map the OF specifier to the clk_hw instance for it. Cc: Alex Elder <elder@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-01 17:15:05 -06:00
ret = of_clk_add_hw_provider(node, of_clk_kona_onecell_get, ccu);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
if (ret) {
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-28 09:44:29 -06:00
pr_err("%s: error adding ccu %pOFn as provider (%d)\n", __func__,
node, ret);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
goto out_err;
}
if (!kona_ccu_init(ccu))
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-28 09:44:29 -06:00
pr_err("Broadcom %pOFn initialization had errors\n", node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
return;
out_err:
kona_ccu_teardown(ccu);
clk: Convert to using %pOFn instead of device_node.name In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-28 09:44:29 -06:00
pr_err("Broadcom %pOFn setup aborted\n", node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-14 11:29:18 -07:00
}