1
0
Fork 0
alistair23-linux/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c

3793 lines
100 KiB
C
Raw Normal View History

/*
* drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c
* Copyright (c) 2016 Mellanox Technologies. All rights reserved.
* Copyright (c) 2016 Jiri Pirko <jiri@mellanox.com>
* Copyright (c) 2016 Ido Schimmel <idosch@mellanox.com>
* Copyright (c) 2016 Yotam Gigi <yotamg@mellanox.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/rhashtable.h>
#include <linux/bitops.h>
#include <linux/in6.h>
#include <linux/notifier.h>
#include <linux/inetdevice.h>
#include <linux/netdevice.h>
#include <linux/if_bridge.h>
#include <net/netevent.h>
#include <net/neighbour.h>
#include <net/arp.h>
#include <net/ip_fib.h>
#include <net/fib_rules.h>
#include <net/l3mdev.h>
#include "spectrum.h"
#include "core.h"
#include "reg.h"
#include "spectrum_cnt.h"
#include "spectrum_dpipe.h"
#include "spectrum_router.h"
struct mlxsw_sp_vr;
struct mlxsw_sp_lpm_tree;
struct mlxsw_sp_rif_ops;
struct mlxsw_sp_router {
struct mlxsw_sp *mlxsw_sp;
struct mlxsw_sp_rif **rifs;
struct mlxsw_sp_vr *vrs;
struct rhashtable neigh_ht;
struct rhashtable nexthop_group_ht;
struct rhashtable nexthop_ht;
struct {
struct mlxsw_sp_lpm_tree *trees;
unsigned int tree_count;
} lpm;
struct {
struct delayed_work dw;
unsigned long interval; /* ms */
} neighs_update;
struct delayed_work nexthop_probe_dw;
#define MLXSW_SP_UNRESOLVED_NH_PROBE_INTERVAL 5000 /* ms */
struct list_head nexthop_neighs_list;
bool aborted;
struct notifier_block fib_nb;
const struct mlxsw_sp_rif_ops **rif_ops_arr;
};
struct mlxsw_sp_rif {
struct list_head nexthop_list;
struct list_head neigh_list;
struct net_device *dev;
struct mlxsw_sp_fid *fid;
unsigned char addr[ETH_ALEN];
int mtu;
u16 rif_index;
u16 vr_id;
const struct mlxsw_sp_rif_ops *ops;
struct mlxsw_sp *mlxsw_sp;
unsigned int counter_ingress;
bool counter_ingress_valid;
unsigned int counter_egress;
bool counter_egress_valid;
};
struct mlxsw_sp_rif_params {
struct net_device *dev;
union {
u16 system_port;
u16 lag_id;
};
u16 vid;
bool lag;
};
struct mlxsw_sp_rif_subport {
struct mlxsw_sp_rif common;
union {
u16 system_port;
u16 lag_id;
};
u16 vid;
bool lag;
};
struct mlxsw_sp_rif_ops {
enum mlxsw_sp_rif_type type;
size_t rif_size;
void (*setup)(struct mlxsw_sp_rif *rif,
const struct mlxsw_sp_rif_params *params);
int (*configure)(struct mlxsw_sp_rif *rif);
void (*deconfigure)(struct mlxsw_sp_rif *rif);
struct mlxsw_sp_fid * (*fid_get)(struct mlxsw_sp_rif *rif);
};
static unsigned int *
mlxsw_sp_rif_p_counter_get(struct mlxsw_sp_rif *rif,
enum mlxsw_sp_rif_counter_dir dir)
{
switch (dir) {
case MLXSW_SP_RIF_COUNTER_EGRESS:
return &rif->counter_egress;
case MLXSW_SP_RIF_COUNTER_INGRESS:
return &rif->counter_ingress;
}
return NULL;
}
static bool
mlxsw_sp_rif_counter_valid_get(struct mlxsw_sp_rif *rif,
enum mlxsw_sp_rif_counter_dir dir)
{
switch (dir) {
case MLXSW_SP_RIF_COUNTER_EGRESS:
return rif->counter_egress_valid;
case MLXSW_SP_RIF_COUNTER_INGRESS:
return rif->counter_ingress_valid;
}
return false;
}
static void
mlxsw_sp_rif_counter_valid_set(struct mlxsw_sp_rif *rif,
enum mlxsw_sp_rif_counter_dir dir,
bool valid)
{
switch (dir) {
case MLXSW_SP_RIF_COUNTER_EGRESS:
rif->counter_egress_valid = valid;
break;
case MLXSW_SP_RIF_COUNTER_INGRESS:
rif->counter_ingress_valid = valid;
break;
}
}
static int mlxsw_sp_rif_counter_edit(struct mlxsw_sp *mlxsw_sp, u16 rif_index,
unsigned int counter_index, bool enable,
enum mlxsw_sp_rif_counter_dir dir)
{
char ritr_pl[MLXSW_REG_RITR_LEN];
bool is_egress = false;
int err;
if (dir == MLXSW_SP_RIF_COUNTER_EGRESS)
is_egress = true;
mlxsw_reg_ritr_rif_pack(ritr_pl, rif_index);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
if (err)
return err;
mlxsw_reg_ritr_counter_pack(ritr_pl, counter_index, enable,
is_egress);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
}
int mlxsw_sp_rif_counter_value_get(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_rif *rif,
enum mlxsw_sp_rif_counter_dir dir, u64 *cnt)
{
char ricnt_pl[MLXSW_REG_RICNT_LEN];
unsigned int *p_counter_index;
bool valid;
int err;
valid = mlxsw_sp_rif_counter_valid_get(rif, dir);
if (!valid)
return -EINVAL;
p_counter_index = mlxsw_sp_rif_p_counter_get(rif, dir);
if (!p_counter_index)
return -EINVAL;
mlxsw_reg_ricnt_pack(ricnt_pl, *p_counter_index,
MLXSW_REG_RICNT_OPCODE_NOP);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ricnt), ricnt_pl);
if (err)
return err;
*cnt = mlxsw_reg_ricnt_good_unicast_packets_get(ricnt_pl);
return 0;
}
static int mlxsw_sp_rif_counter_clear(struct mlxsw_sp *mlxsw_sp,
unsigned int counter_index)
{
char ricnt_pl[MLXSW_REG_RICNT_LEN];
mlxsw_reg_ricnt_pack(ricnt_pl, counter_index,
MLXSW_REG_RICNT_OPCODE_CLEAR);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ricnt), ricnt_pl);
}
int mlxsw_sp_rif_counter_alloc(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_rif *rif,
enum mlxsw_sp_rif_counter_dir dir)
{
unsigned int *p_counter_index;
int err;
p_counter_index = mlxsw_sp_rif_p_counter_get(rif, dir);
if (!p_counter_index)
return -EINVAL;
err = mlxsw_sp_counter_alloc(mlxsw_sp, MLXSW_SP_COUNTER_SUB_POOL_RIF,
p_counter_index);
if (err)
return err;
err = mlxsw_sp_rif_counter_clear(mlxsw_sp, *p_counter_index);
if (err)
goto err_counter_clear;
err = mlxsw_sp_rif_counter_edit(mlxsw_sp, rif->rif_index,
*p_counter_index, true, dir);
if (err)
goto err_counter_edit;
mlxsw_sp_rif_counter_valid_set(rif, dir, true);
return 0;
err_counter_edit:
err_counter_clear:
mlxsw_sp_counter_free(mlxsw_sp, MLXSW_SP_COUNTER_SUB_POOL_RIF,
*p_counter_index);
return err;
}
void mlxsw_sp_rif_counter_free(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_rif *rif,
enum mlxsw_sp_rif_counter_dir dir)
{
unsigned int *p_counter_index;
if (!mlxsw_sp_rif_counter_valid_get(rif, dir))
return;
p_counter_index = mlxsw_sp_rif_p_counter_get(rif, dir);
if (WARN_ON(!p_counter_index))
return;
mlxsw_sp_rif_counter_edit(mlxsw_sp, rif->rif_index,
*p_counter_index, false, dir);
mlxsw_sp_counter_free(mlxsw_sp, MLXSW_SP_COUNTER_SUB_POOL_RIF,
*p_counter_index);
mlxsw_sp_rif_counter_valid_set(rif, dir, false);
}
static void mlxsw_sp_rif_counters_alloc(struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
struct devlink *devlink;
devlink = priv_to_devlink(mlxsw_sp->core);
if (!devlink_dpipe_table_counter_enabled(devlink,
MLXSW_SP_DPIPE_TABLE_NAME_ERIF))
return;
mlxsw_sp_rif_counter_alloc(mlxsw_sp, rif, MLXSW_SP_RIF_COUNTER_EGRESS);
}
static void mlxsw_sp_rif_counters_free(struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
mlxsw_sp_rif_counter_free(mlxsw_sp, rif, MLXSW_SP_RIF_COUNTER_EGRESS);
}
static struct mlxsw_sp_rif *
mlxsw_sp_rif_find_by_dev(const struct mlxsw_sp *mlxsw_sp,
const struct net_device *dev);
#define MLXSW_SP_PREFIX_COUNT (sizeof(struct in6_addr) * BITS_PER_BYTE)
struct mlxsw_sp_prefix_usage {
DECLARE_BITMAP(b, MLXSW_SP_PREFIX_COUNT);
};
#define mlxsw_sp_prefix_usage_for_each(prefix, prefix_usage) \
for_each_set_bit(prefix, (prefix_usage)->b, MLXSW_SP_PREFIX_COUNT)
static bool
mlxsw_sp_prefix_usage_subset(struct mlxsw_sp_prefix_usage *prefix_usage1,
struct mlxsw_sp_prefix_usage *prefix_usage2)
{
unsigned char prefix;
mlxsw_sp_prefix_usage_for_each(prefix, prefix_usage1) {
if (!test_bit(prefix, prefix_usage2->b))
return false;
}
return true;
}
static bool
mlxsw_sp_prefix_usage_eq(struct mlxsw_sp_prefix_usage *prefix_usage1,
struct mlxsw_sp_prefix_usage *prefix_usage2)
{
return !memcmp(prefix_usage1, prefix_usage2, sizeof(*prefix_usage1));
}
static bool
mlxsw_sp_prefix_usage_none(struct mlxsw_sp_prefix_usage *prefix_usage)
{
struct mlxsw_sp_prefix_usage prefix_usage_none = {{ 0 } };
return mlxsw_sp_prefix_usage_eq(prefix_usage, &prefix_usage_none);
}
static void
mlxsw_sp_prefix_usage_cpy(struct mlxsw_sp_prefix_usage *prefix_usage1,
struct mlxsw_sp_prefix_usage *prefix_usage2)
{
memcpy(prefix_usage1, prefix_usage2, sizeof(*prefix_usage1));
}
static void
mlxsw_sp_prefix_usage_set(struct mlxsw_sp_prefix_usage *prefix_usage,
unsigned char prefix_len)
{
set_bit(prefix_len, prefix_usage->b);
}
static void
mlxsw_sp_prefix_usage_clear(struct mlxsw_sp_prefix_usage *prefix_usage,
unsigned char prefix_len)
{
clear_bit(prefix_len, prefix_usage->b);
}
struct mlxsw_sp_fib_key {
unsigned char addr[sizeof(struct in6_addr)];
unsigned char prefix_len;
};
enum mlxsw_sp_fib_entry_type {
MLXSW_SP_FIB_ENTRY_TYPE_REMOTE,
MLXSW_SP_FIB_ENTRY_TYPE_LOCAL,
MLXSW_SP_FIB_ENTRY_TYPE_TRAP,
};
struct mlxsw_sp_nexthop_group;
struct mlxsw_sp_fib;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct mlxsw_sp_fib_node {
struct list_head entry_list;
struct list_head list;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct rhash_head ht_node;
struct mlxsw_sp_fib *fib;
struct mlxsw_sp_fib_key key;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
};
struct mlxsw_sp_fib_entry_params {
u32 tb_id;
u32 prio;
u8 tos;
u8 type;
};
struct mlxsw_sp_fib_entry {
struct list_head list;
struct mlxsw_sp_fib_node *fib_node;
enum mlxsw_sp_fib_entry_type type;
struct list_head nexthop_group_node;
struct mlxsw_sp_nexthop_group *nh_group;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct mlxsw_sp_fib_entry_params params;
bool offloaded;
};
enum mlxsw_sp_l3proto {
MLXSW_SP_L3_PROTO_IPV4,
MLXSW_SP_L3_PROTO_IPV6,
};
struct mlxsw_sp_lpm_tree {
u8 id; /* tree ID */
unsigned int ref_count;
enum mlxsw_sp_l3proto proto;
struct mlxsw_sp_prefix_usage prefix_usage;
};
struct mlxsw_sp_fib {
struct rhashtable ht;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct list_head node_list;
struct mlxsw_sp_vr *vr;
struct mlxsw_sp_lpm_tree *lpm_tree;
unsigned long prefix_ref_count[MLXSW_SP_PREFIX_COUNT];
struct mlxsw_sp_prefix_usage prefix_usage;
enum mlxsw_sp_l3proto proto;
};
struct mlxsw_sp_vr {
u16 id; /* virtual router ID */
u32 tb_id; /* kernel fib table id */
unsigned int rif_count;
struct mlxsw_sp_fib *fib4;
};
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static const struct rhashtable_params mlxsw_sp_fib_ht_params;
static struct mlxsw_sp_fib *mlxsw_sp_fib_create(struct mlxsw_sp_vr *vr,
enum mlxsw_sp_l3proto proto)
{
struct mlxsw_sp_fib *fib;
int err;
fib = kzalloc(sizeof(*fib), GFP_KERNEL);
if (!fib)
return ERR_PTR(-ENOMEM);
err = rhashtable_init(&fib->ht, &mlxsw_sp_fib_ht_params);
if (err)
goto err_rhashtable_init;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
INIT_LIST_HEAD(&fib->node_list);
fib->proto = proto;
fib->vr = vr;
return fib;
err_rhashtable_init:
kfree(fib);
return ERR_PTR(err);
}
static void mlxsw_sp_fib_destroy(struct mlxsw_sp_fib *fib)
{
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
WARN_ON(!list_empty(&fib->node_list));
WARN_ON(fib->lpm_tree);
rhashtable_destroy(&fib->ht);
kfree(fib);
}
static struct mlxsw_sp_lpm_tree *
mlxsw_sp_lpm_tree_find_unused(struct mlxsw_sp *mlxsw_sp)
{
static struct mlxsw_sp_lpm_tree *lpm_tree;
int i;
for (i = 0; i < mlxsw_sp->router->lpm.tree_count; i++) {
lpm_tree = &mlxsw_sp->router->lpm.trees[i];
if (lpm_tree->ref_count == 0)
return lpm_tree;
}
return NULL;
}
static int mlxsw_sp_lpm_tree_alloc(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_lpm_tree *lpm_tree)
{
char ralta_pl[MLXSW_REG_RALTA_LEN];
mlxsw: spectrum: Fix sparse warnings drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 00:29:26 -06:00
mlxsw_reg_ralta_pack(ralta_pl, true,
(enum mlxsw_reg_ralxx_protocol) lpm_tree->proto,
lpm_tree->id);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralta), ralta_pl);
}
static int mlxsw_sp_lpm_tree_free(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_lpm_tree *lpm_tree)
{
char ralta_pl[MLXSW_REG_RALTA_LEN];
mlxsw: spectrum: Fix sparse warnings drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 00:29:26 -06:00
mlxsw_reg_ralta_pack(ralta_pl, false,
(enum mlxsw_reg_ralxx_protocol) lpm_tree->proto,
lpm_tree->id);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralta), ralta_pl);
}
static int
mlxsw_sp_lpm_tree_left_struct_set(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_prefix_usage *prefix_usage,
struct mlxsw_sp_lpm_tree *lpm_tree)
{
char ralst_pl[MLXSW_REG_RALST_LEN];
u8 root_bin = 0;
u8 prefix;
u8 last_prefix = MLXSW_REG_RALST_BIN_NO_CHILD;
mlxsw_sp_prefix_usage_for_each(prefix, prefix_usage)
root_bin = prefix;
mlxsw_reg_ralst_pack(ralst_pl, root_bin, lpm_tree->id);
mlxsw_sp_prefix_usage_for_each(prefix, prefix_usage) {
if (prefix == 0)
continue;
mlxsw_reg_ralst_bin_pack(ralst_pl, prefix, last_prefix,
MLXSW_REG_RALST_BIN_NO_CHILD);
last_prefix = prefix;
}
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralst), ralst_pl);
}
static struct mlxsw_sp_lpm_tree *
mlxsw_sp_lpm_tree_create(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_prefix_usage *prefix_usage,
enum mlxsw_sp_l3proto proto)
{
struct mlxsw_sp_lpm_tree *lpm_tree;
int err;
lpm_tree = mlxsw_sp_lpm_tree_find_unused(mlxsw_sp);
if (!lpm_tree)
return ERR_PTR(-EBUSY);
lpm_tree->proto = proto;
err = mlxsw_sp_lpm_tree_alloc(mlxsw_sp, lpm_tree);
if (err)
return ERR_PTR(err);
err = mlxsw_sp_lpm_tree_left_struct_set(mlxsw_sp, prefix_usage,
lpm_tree);
if (err)
goto err_left_struct_set;
memcpy(&lpm_tree->prefix_usage, prefix_usage,
sizeof(lpm_tree->prefix_usage));
return lpm_tree;
err_left_struct_set:
mlxsw_sp_lpm_tree_free(mlxsw_sp, lpm_tree);
return ERR_PTR(err);
}
static int mlxsw_sp_lpm_tree_destroy(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_lpm_tree *lpm_tree)
{
return mlxsw_sp_lpm_tree_free(mlxsw_sp, lpm_tree);
}
static struct mlxsw_sp_lpm_tree *
mlxsw_sp_lpm_tree_get(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_prefix_usage *prefix_usage,
enum mlxsw_sp_l3proto proto)
{
struct mlxsw_sp_lpm_tree *lpm_tree;
int i;
for (i = 0; i < mlxsw_sp->router->lpm.tree_count; i++) {
lpm_tree = &mlxsw_sp->router->lpm.trees[i];
if (lpm_tree->ref_count != 0 &&
lpm_tree->proto == proto &&
mlxsw_sp_prefix_usage_eq(&lpm_tree->prefix_usage,
prefix_usage))
goto inc_ref_count;
}
lpm_tree = mlxsw_sp_lpm_tree_create(mlxsw_sp, prefix_usage,
proto);
if (IS_ERR(lpm_tree))
return lpm_tree;
inc_ref_count:
lpm_tree->ref_count++;
return lpm_tree;
}
static int mlxsw_sp_lpm_tree_put(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_lpm_tree *lpm_tree)
{
if (--lpm_tree->ref_count == 0)
return mlxsw_sp_lpm_tree_destroy(mlxsw_sp, lpm_tree);
return 0;
}
#define MLXSW_SP_LPM_TREE_MIN 1 /* tree 0 is reserved */
static int mlxsw_sp_lpm_init(struct mlxsw_sp *mlxsw_sp)
{
struct mlxsw_sp_lpm_tree *lpm_tree;
u64 max_trees;
int i;
if (!MLXSW_CORE_RES_VALID(mlxsw_sp->core, MAX_LPM_TREES))
return -EIO;
max_trees = MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_LPM_TREES);
mlxsw_sp->router->lpm.tree_count = max_trees - MLXSW_SP_LPM_TREE_MIN;
mlxsw_sp->router->lpm.trees = kcalloc(mlxsw_sp->router->lpm.tree_count,
sizeof(struct mlxsw_sp_lpm_tree),
GFP_KERNEL);
if (!mlxsw_sp->router->lpm.trees)
return -ENOMEM;
for (i = 0; i < mlxsw_sp->router->lpm.tree_count; i++) {
lpm_tree = &mlxsw_sp->router->lpm.trees[i];
lpm_tree->id = i + MLXSW_SP_LPM_TREE_MIN;
}
return 0;
}
static void mlxsw_sp_lpm_fini(struct mlxsw_sp *mlxsw_sp)
{
kfree(mlxsw_sp->router->lpm.trees);
}
static bool mlxsw_sp_vr_is_used(const struct mlxsw_sp_vr *vr)
{
return !!vr->fib4;
}
static struct mlxsw_sp_vr *mlxsw_sp_vr_find_unused(struct mlxsw_sp *mlxsw_sp)
{
struct mlxsw_sp_vr *vr;
int i;
for (i = 0; i < MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_VRS); i++) {
vr = &mlxsw_sp->router->vrs[i];
if (!mlxsw_sp_vr_is_used(vr))
return vr;
}
return NULL;
}
static int mlxsw_sp_vr_lpm_tree_bind(struct mlxsw_sp *mlxsw_sp,
const struct mlxsw_sp_fib *fib)
{
char raltb_pl[MLXSW_REG_RALTB_LEN];
mlxsw_reg_raltb_pack(raltb_pl, fib->vr->id,
(enum mlxsw_reg_ralxx_protocol) fib->proto,
fib->lpm_tree->id);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(raltb), raltb_pl);
}
static int mlxsw_sp_vr_lpm_tree_unbind(struct mlxsw_sp *mlxsw_sp,
const struct mlxsw_sp_fib *fib)
{
char raltb_pl[MLXSW_REG_RALTB_LEN];
/* Bind to tree 0 which is default */
mlxsw_reg_raltb_pack(raltb_pl, fib->vr->id,
(enum mlxsw_reg_ralxx_protocol) fib->proto, 0);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(raltb), raltb_pl);
}
static u32 mlxsw_sp_fix_tb_id(u32 tb_id)
{
/* For our purpose, squash main and local table into one */
if (tb_id == RT_TABLE_LOCAL)
tb_id = RT_TABLE_MAIN;
return tb_id;
}
static struct mlxsw_sp_vr *mlxsw_sp_vr_find(struct mlxsw_sp *mlxsw_sp,
u32 tb_id)
{
struct mlxsw_sp_vr *vr;
int i;
tb_id = mlxsw_sp_fix_tb_id(tb_id);
for (i = 0; i < MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_VRS); i++) {
vr = &mlxsw_sp->router->vrs[i];
if (mlxsw_sp_vr_is_used(vr) && vr->tb_id == tb_id)
return vr;
}
return NULL;
}
static struct mlxsw_sp_fib *mlxsw_sp_vr_fib(const struct mlxsw_sp_vr *vr,
enum mlxsw_sp_l3proto proto)
{
switch (proto) {
case MLXSW_SP_L3_PROTO_IPV4:
return vr->fib4;
case MLXSW_SP_L3_PROTO_IPV6:
BUG_ON(1);
}
return NULL;
}
static struct mlxsw_sp_vr *mlxsw_sp_vr_create(struct mlxsw_sp *mlxsw_sp,
u32 tb_id)
{
struct mlxsw_sp_vr *vr;
vr = mlxsw_sp_vr_find_unused(mlxsw_sp);
if (!vr)
return ERR_PTR(-EBUSY);
vr->fib4 = mlxsw_sp_fib_create(vr, MLXSW_SP_L3_PROTO_IPV4);
if (IS_ERR(vr->fib4))
return ERR_CAST(vr->fib4);
vr->tb_id = tb_id;
return vr;
}
static void mlxsw_sp_vr_destroy(struct mlxsw_sp_vr *vr)
{
mlxsw_sp_fib_destroy(vr->fib4);
vr->fib4 = NULL;
}
static int
mlxsw_sp_vr_lpm_tree_check(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_fib *fib,
struct mlxsw_sp_prefix_usage *req_prefix_usage)
{
struct mlxsw_sp_lpm_tree *lpm_tree = fib->lpm_tree;
struct mlxsw_sp_lpm_tree *new_tree;
int err;
if (mlxsw_sp_prefix_usage_eq(req_prefix_usage, &lpm_tree->prefix_usage))
return 0;
new_tree = mlxsw_sp_lpm_tree_get(mlxsw_sp, req_prefix_usage,
fib->proto);
if (IS_ERR(new_tree)) {
/* We failed to get a tree according to the required
* prefix usage. However, the current tree might be still good
* for us if our requirement is subset of the prefixes used
* in the tree.
*/
if (mlxsw_sp_prefix_usage_subset(req_prefix_usage,
&lpm_tree->prefix_usage))
return 0;
return PTR_ERR(new_tree);
}
/* Prevent packet loss by overwriting existing binding */
fib->lpm_tree = new_tree;
err = mlxsw_sp_vr_lpm_tree_bind(mlxsw_sp, fib);
if (err)
goto err_tree_bind;
mlxsw_sp_lpm_tree_put(mlxsw_sp, lpm_tree);
return 0;
err_tree_bind:
fib->lpm_tree = lpm_tree;
mlxsw_sp_lpm_tree_put(mlxsw_sp, new_tree);
return err;
}
static struct mlxsw_sp_vr *mlxsw_sp_vr_get(struct mlxsw_sp *mlxsw_sp, u32 tb_id)
{
struct mlxsw_sp_vr *vr;
tb_id = mlxsw_sp_fix_tb_id(tb_id);
vr = mlxsw_sp_vr_find(mlxsw_sp, tb_id);
if (!vr)
vr = mlxsw_sp_vr_create(mlxsw_sp, tb_id);
return vr;
}
static void mlxsw_sp_vr_put(struct mlxsw_sp_vr *vr)
{
if (!vr->rif_count && list_empty(&vr->fib4->node_list))
mlxsw_sp_vr_destroy(vr);
}
static int mlxsw_sp_vrs_init(struct mlxsw_sp *mlxsw_sp)
{
struct mlxsw_sp_vr *vr;
u64 max_vrs;
int i;
if (!MLXSW_CORE_RES_VALID(mlxsw_sp->core, MAX_VRS))
return -EIO;
max_vrs = MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_VRS);
mlxsw_sp->router->vrs = kcalloc(max_vrs, sizeof(struct mlxsw_sp_vr),
GFP_KERNEL);
if (!mlxsw_sp->router->vrs)
return -ENOMEM;
for (i = 0; i < max_vrs; i++) {
vr = &mlxsw_sp->router->vrs[i];
vr->id = i;
}
return 0;
}
static void mlxsw_sp_router_fib_flush(struct mlxsw_sp *mlxsw_sp);
static void mlxsw_sp_vrs_fini(struct mlxsw_sp *mlxsw_sp)
{
/* At this stage we're guaranteed not to have new incoming
* FIB notifications and the work queue is free from FIBs
* sitting on top of mlxsw netdevs. However, we can still
* have other FIBs queued. Flush the queue before flushing
* the device's tables. No need for locks, as we're the only
* writer.
*/
mlxsw_core_flush_owq();
mlxsw_sp_router_fib_flush(mlxsw_sp);
kfree(mlxsw_sp->router->vrs);
}
struct mlxsw_sp_neigh_key {
struct neighbour *n;
};
struct mlxsw_sp_neigh_entry {
struct list_head rif_list_node;
struct rhash_head ht_node;
struct mlxsw_sp_neigh_key key;
u16 rif;
bool connected;
unsigned char ha[ETH_ALEN];
struct list_head nexthop_list; /* list of nexthops using
* this neigh entry
*/
struct list_head nexthop_neighs_list_node;
};
static const struct rhashtable_params mlxsw_sp_neigh_ht_params = {
.key_offset = offsetof(struct mlxsw_sp_neigh_entry, key),
.head_offset = offsetof(struct mlxsw_sp_neigh_entry, ht_node),
.key_len = sizeof(struct mlxsw_sp_neigh_key),
};
static struct mlxsw_sp_neigh_entry *
mlxsw_sp_neigh_entry_alloc(struct mlxsw_sp *mlxsw_sp, struct neighbour *n,
u16 rif)
{
struct mlxsw_sp_neigh_entry *neigh_entry;
neigh_entry = kzalloc(sizeof(*neigh_entry), GFP_KERNEL);
if (!neigh_entry)
return NULL;
neigh_entry->key.n = n;
neigh_entry->rif = rif;
INIT_LIST_HEAD(&neigh_entry->nexthop_list);
return neigh_entry;
}
static void mlxsw_sp_neigh_entry_free(struct mlxsw_sp_neigh_entry *neigh_entry)
{
kfree(neigh_entry);
}
static int
mlxsw_sp_neigh_entry_insert(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry)
{
return rhashtable_insert_fast(&mlxsw_sp->router->neigh_ht,
&neigh_entry->ht_node,
mlxsw_sp_neigh_ht_params);
}
static void
mlxsw_sp_neigh_entry_remove(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry)
{
rhashtable_remove_fast(&mlxsw_sp->router->neigh_ht,
&neigh_entry->ht_node,
mlxsw_sp_neigh_ht_params);
}
static struct mlxsw_sp_neigh_entry *
mlxsw_sp_neigh_entry_create(struct mlxsw_sp *mlxsw_sp, struct neighbour *n)
{
struct mlxsw_sp_neigh_entry *neigh_entry;
struct mlxsw_sp_rif *rif;
int err;
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, n->dev);
if (!rif)
return ERR_PTR(-EINVAL);
neigh_entry = mlxsw_sp_neigh_entry_alloc(mlxsw_sp, n, rif->rif_index);
if (!neigh_entry)
return ERR_PTR(-ENOMEM);
err = mlxsw_sp_neigh_entry_insert(mlxsw_sp, neigh_entry);
if (err)
goto err_neigh_entry_insert;
list_add(&neigh_entry->rif_list_node, &rif->neigh_list);
return neigh_entry;
err_neigh_entry_insert:
mlxsw_sp_neigh_entry_free(neigh_entry);
return ERR_PTR(err);
}
static void
mlxsw_sp_neigh_entry_destroy(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry)
{
list_del(&neigh_entry->rif_list_node);
mlxsw_sp_neigh_entry_remove(mlxsw_sp, neigh_entry);
mlxsw_sp_neigh_entry_free(neigh_entry);
}
static struct mlxsw_sp_neigh_entry *
mlxsw_sp_neigh_entry_lookup(struct mlxsw_sp *mlxsw_sp, struct neighbour *n)
{
struct mlxsw_sp_neigh_key key;
key.n = n;
return rhashtable_lookup_fast(&mlxsw_sp->router->neigh_ht,
&key, mlxsw_sp_neigh_ht_params);
}
static void
mlxsw_sp_router_neighs_update_interval_init(struct mlxsw_sp *mlxsw_sp)
{
unsigned long interval = NEIGH_VAR(&arp_tbl.parms, DELAY_PROBE_TIME);
mlxsw_sp->router->neighs_update.interval = jiffies_to_msecs(interval);
}
static void mlxsw_sp_router_neigh_ent_ipv4_process(struct mlxsw_sp *mlxsw_sp,
char *rauhtd_pl,
int ent_index)
{
struct net_device *dev;
struct neighbour *n;
__be32 dipn;
u32 dip;
u16 rif;
mlxsw_reg_rauhtd_ent_ipv4_unpack(rauhtd_pl, ent_index, &rif, &dip);
if (!mlxsw_sp->router->rifs[rif]) {
dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Incorrect RIF in neighbour entry\n");
return;
}
dipn = htonl(dip);
dev = mlxsw_sp->router->rifs[rif]->dev;
n = neigh_lookup(&arp_tbl, &dipn, dev);
if (!n) {
netdev_err(dev, "Failed to find matching neighbour for IP=%pI4h\n",
&dip);
return;
}
netdev_dbg(dev, "Updating neighbour with IP=%pI4h\n", &dip);
neigh_event_send(n, NULL);
neigh_release(n);
}
static void mlxsw_sp_router_neigh_rec_ipv4_process(struct mlxsw_sp *mlxsw_sp,
char *rauhtd_pl,
int rec_index)
{
u8 num_entries;
int i;
num_entries = mlxsw_reg_rauhtd_ipv4_rec_num_entries_get(rauhtd_pl,
rec_index);
/* Hardware starts counting at 0, so add 1. */
num_entries++;
/* Each record consists of several neighbour entries. */
for (i = 0; i < num_entries; i++) {
int ent_index;
ent_index = rec_index * MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC + i;
mlxsw_sp_router_neigh_ent_ipv4_process(mlxsw_sp, rauhtd_pl,
ent_index);
}
}
static void mlxsw_sp_router_neigh_rec_process(struct mlxsw_sp *mlxsw_sp,
char *rauhtd_pl, int rec_index)
{
switch (mlxsw_reg_rauhtd_rec_type_get(rauhtd_pl, rec_index)) {
case MLXSW_REG_RAUHTD_TYPE_IPV4:
mlxsw_sp_router_neigh_rec_ipv4_process(mlxsw_sp, rauhtd_pl,
rec_index);
break;
case MLXSW_REG_RAUHTD_TYPE_IPV6:
WARN_ON_ONCE(1);
break;
}
}
static bool mlxsw_sp_router_rauhtd_is_full(char *rauhtd_pl)
{
u8 num_rec, last_rec_index, num_entries;
num_rec = mlxsw_reg_rauhtd_num_rec_get(rauhtd_pl);
last_rec_index = num_rec - 1;
if (num_rec < MLXSW_REG_RAUHTD_REC_MAX_NUM)
return false;
if (mlxsw_reg_rauhtd_rec_type_get(rauhtd_pl, last_rec_index) ==
MLXSW_REG_RAUHTD_TYPE_IPV6)
return true;
num_entries = mlxsw_reg_rauhtd_ipv4_rec_num_entries_get(rauhtd_pl,
last_rec_index);
if (++num_entries == MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC)
return true;
return false;
}
static int mlxsw_sp_router_neighs_update_rauhtd(struct mlxsw_sp *mlxsw_sp)
{
char *rauhtd_pl;
u8 num_rec;
int i, err;
rauhtd_pl = kmalloc(MLXSW_REG_RAUHTD_LEN, GFP_KERNEL);
if (!rauhtd_pl)
return -ENOMEM;
/* Make sure the neighbour's netdev isn't removed in the
* process.
*/
rtnl_lock();
do {
mlxsw_reg_rauhtd_pack(rauhtd_pl, MLXSW_REG_RAUHTD_TYPE_IPV4);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(rauhtd),
rauhtd_pl);
if (err) {
dev_err_ratelimited(mlxsw_sp->bus_info->dev, "Failed to dump neighbour talbe\n");
break;
}
num_rec = mlxsw_reg_rauhtd_num_rec_get(rauhtd_pl);
for (i = 0; i < num_rec; i++)
mlxsw_sp_router_neigh_rec_process(mlxsw_sp, rauhtd_pl,
i);
} while (mlxsw_sp_router_rauhtd_is_full(rauhtd_pl));
rtnl_unlock();
kfree(rauhtd_pl);
return err;
}
static void mlxsw_sp_router_neighs_update_nh(struct mlxsw_sp *mlxsw_sp)
{
struct mlxsw_sp_neigh_entry *neigh_entry;
/* Take RTNL mutex here to prevent lists from changes */
rtnl_lock();
list_for_each_entry(neigh_entry, &mlxsw_sp->router->nexthop_neighs_list,
nexthop_neighs_list_node)
/* If this neigh have nexthops, make the kernel think this neigh
* is active regardless of the traffic.
*/
neigh_event_send(neigh_entry->key.n, NULL);
rtnl_unlock();
}
static void
mlxsw_sp_router_neighs_update_work_schedule(struct mlxsw_sp *mlxsw_sp)
{
unsigned long interval = mlxsw_sp->router->neighs_update.interval;
mlxsw_core_schedule_dw(&mlxsw_sp->router->neighs_update.dw,
msecs_to_jiffies(interval));
}
static void mlxsw_sp_router_neighs_update_work(struct work_struct *work)
{
struct mlxsw_sp_router *router;
int err;
router = container_of(work, struct mlxsw_sp_router,
neighs_update.dw.work);
err = mlxsw_sp_router_neighs_update_rauhtd(router->mlxsw_sp);
if (err)
dev_err(router->mlxsw_sp->bus_info->dev, "Could not update kernel for neigh activity");
mlxsw_sp_router_neighs_update_nh(router->mlxsw_sp);
mlxsw_sp_router_neighs_update_work_schedule(router->mlxsw_sp);
}
static void mlxsw_sp_router_probe_unresolved_nexthops(struct work_struct *work)
{
struct mlxsw_sp_neigh_entry *neigh_entry;
struct mlxsw_sp_router *router;
router = container_of(work, struct mlxsw_sp_router,
nexthop_probe_dw.work);
/* Iterate over nexthop neighbours, find those who are unresolved and
* send arp on them. This solves the chicken-egg problem when
* the nexthop wouldn't get offloaded until the neighbor is resolved
* but it wouldn't get resolved ever in case traffic is flowing in HW
* using different nexthop.
*
* Take RTNL mutex here to prevent lists from changes.
*/
rtnl_lock();
list_for_each_entry(neigh_entry, &router->nexthop_neighs_list,
nexthop_neighs_list_node)
if (!neigh_entry->connected)
neigh_event_send(neigh_entry->key.n, NULL);
rtnl_unlock();
mlxsw_core_schedule_dw(&router->nexthop_probe_dw,
MLXSW_SP_UNRESOLVED_NH_PROBE_INTERVAL);
}
static void
mlxsw_sp_nexthop_neigh_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry,
bool removing);
static enum mlxsw_reg_rauht_op mlxsw_sp_rauht_op(bool adding)
{
return adding ? MLXSW_REG_RAUHT_OP_WRITE_ADD :
MLXSW_REG_RAUHT_OP_WRITE_DELETE;
}
static void
mlxsw_sp_router_neigh_entry_op4(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry,
enum mlxsw_reg_rauht_op op)
{
struct neighbour *n = neigh_entry->key.n;
u32 dip = ntohl(*((__be32 *) n->primary_key));
char rauht_pl[MLXSW_REG_RAUHT_LEN];
mlxsw_reg_rauht_pack4(rauht_pl, op, neigh_entry->rif, neigh_entry->ha,
dip);
mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl);
}
static void
mlxsw_sp_neigh_entry_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry,
bool adding)
{
if (!adding && !neigh_entry->connected)
return;
neigh_entry->connected = adding;
if (neigh_entry->key.n->tbl == &arp_tbl)
mlxsw_sp_router_neigh_entry_op4(mlxsw_sp, neigh_entry,
mlxsw_sp_rauht_op(adding));
else
WARN_ON_ONCE(1);
}
struct mlxsw_sp_neigh_event_work {
struct work_struct work;
struct mlxsw_sp *mlxsw_sp;
struct neighbour *n;
};
static void mlxsw_sp_router_neigh_event_work(struct work_struct *work)
{
struct mlxsw_sp_neigh_event_work *neigh_work =
container_of(work, struct mlxsw_sp_neigh_event_work, work);
struct mlxsw_sp *mlxsw_sp = neigh_work->mlxsw_sp;
struct mlxsw_sp_neigh_entry *neigh_entry;
struct neighbour *n = neigh_work->n;
unsigned char ha[ETH_ALEN];
bool entry_connected;
u8 nud_state, dead;
/* If these parameters are changed after we release the lock,
* then we are guaranteed to receive another event letting us
* know about it.
*/
read_lock_bh(&n->lock);
memcpy(ha, n->ha, ETH_ALEN);
nud_state = n->nud_state;
dead = n->dead;
read_unlock_bh(&n->lock);
rtnl_lock();
entry_connected = nud_state & NUD_VALID && !dead;
neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n);
if (!entry_connected && !neigh_entry)
goto out;
if (!neigh_entry) {
neigh_entry = mlxsw_sp_neigh_entry_create(mlxsw_sp, n);
if (IS_ERR(neigh_entry))
goto out;
}
memcpy(neigh_entry->ha, ha, ETH_ALEN);
mlxsw_sp_neigh_entry_update(mlxsw_sp, neigh_entry, entry_connected);
mlxsw_sp_nexthop_neigh_update(mlxsw_sp, neigh_entry, !entry_connected);
if (!neigh_entry->connected && list_empty(&neigh_entry->nexthop_list))
mlxsw_sp_neigh_entry_destroy(mlxsw_sp, neigh_entry);
out:
rtnl_unlock();
neigh_release(n);
kfree(neigh_work);
}
int mlxsw_sp_router_netevent_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct mlxsw_sp_neigh_event_work *neigh_work;
struct mlxsw_sp_port *mlxsw_sp_port;
struct mlxsw_sp *mlxsw_sp;
unsigned long interval;
struct neigh_parms *p;
struct neighbour *n;
switch (event) {
case NETEVENT_DELAY_PROBE_TIME_UPDATE:
p = ptr;
/* We don't care about changes in the default table. */
if (!p->dev || p->tbl != &arp_tbl)
return NOTIFY_DONE;
/* We are in atomic context and can't take RTNL mutex,
* so use RCU variant to walk the device chain.
*/
mlxsw_sp_port = mlxsw_sp_port_lower_dev_hold(p->dev);
if (!mlxsw_sp_port)
return NOTIFY_DONE;
mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
interval = jiffies_to_msecs(NEIGH_VAR(p, DELAY_PROBE_TIME));
mlxsw_sp->router->neighs_update.interval = interval;
mlxsw_sp_port_dev_put(mlxsw_sp_port);
break;
case NETEVENT_NEIGH_UPDATE:
n = ptr;
if (n->tbl != &arp_tbl)
return NOTIFY_DONE;
mlxsw_sp_port = mlxsw_sp_port_lower_dev_hold(n->dev);
if (!mlxsw_sp_port)
return NOTIFY_DONE;
neigh_work = kzalloc(sizeof(*neigh_work), GFP_ATOMIC);
if (!neigh_work) {
mlxsw_sp_port_dev_put(mlxsw_sp_port);
return NOTIFY_BAD;
}
INIT_WORK(&neigh_work->work, mlxsw_sp_router_neigh_event_work);
neigh_work->mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
neigh_work->n = n;
/* Take a reference to ensure the neighbour won't be
* destructed until we drop the reference in delayed
* work.
*/
neigh_clone(n);
mlxsw_core_schedule_work(&neigh_work->work);
mlxsw_sp_port_dev_put(mlxsw_sp_port);
break;
}
return NOTIFY_DONE;
}
static int mlxsw_sp_neigh_init(struct mlxsw_sp *mlxsw_sp)
{
int err;
err = rhashtable_init(&mlxsw_sp->router->neigh_ht,
&mlxsw_sp_neigh_ht_params);
if (err)
return err;
/* Initialize the polling interval according to the default
* table.
*/
mlxsw_sp_router_neighs_update_interval_init(mlxsw_sp);
/* Create the delayed works for the activity_update */
INIT_DELAYED_WORK(&mlxsw_sp->router->neighs_update.dw,
mlxsw_sp_router_neighs_update_work);
INIT_DELAYED_WORK(&mlxsw_sp->router->nexthop_probe_dw,
mlxsw_sp_router_probe_unresolved_nexthops);
mlxsw_core_schedule_dw(&mlxsw_sp->router->neighs_update.dw, 0);
mlxsw_core_schedule_dw(&mlxsw_sp->router->nexthop_probe_dw, 0);
return 0;
}
static void mlxsw_sp_neigh_fini(struct mlxsw_sp *mlxsw_sp)
{
cancel_delayed_work_sync(&mlxsw_sp->router->neighs_update.dw);
cancel_delayed_work_sync(&mlxsw_sp->router->nexthop_probe_dw);
rhashtable_destroy(&mlxsw_sp->router->neigh_ht);
}
static int mlxsw_sp_neigh_rif_flush(struct mlxsw_sp *mlxsw_sp,
const struct mlxsw_sp_rif *rif)
{
char rauht_pl[MLXSW_REG_RAUHT_LEN];
mlxsw_reg_rauht_pack(rauht_pl, MLXSW_REG_RAUHT_OP_WRITE_DELETE_ALL,
rif->rif_index, rif->addr);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rauht), rauht_pl);
}
static void mlxsw_sp_neigh_rif_gone_sync(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp_neigh_entry *neigh_entry, *tmp;
mlxsw_sp_neigh_rif_flush(mlxsw_sp, rif);
list_for_each_entry_safe(neigh_entry, tmp, &rif->neigh_list,
rif_list_node)
mlxsw_sp_neigh_entry_destroy(mlxsw_sp, neigh_entry);
}
struct mlxsw_sp_nexthop_key {
struct fib_nh *fib_nh;
};
struct mlxsw_sp_nexthop {
struct list_head neigh_list_node; /* member of neigh entry list */
struct list_head rif_list_node;
struct mlxsw_sp_nexthop_group *nh_grp; /* pointer back to the group
* this belongs to
*/
struct rhash_head ht_node;
struct mlxsw_sp_nexthop_key key;
struct mlxsw_sp_rif *rif;
u8 should_offload:1, /* set indicates this neigh is connected and
* should be put to KVD linear area of this group.
*/
offloaded:1, /* set in case the neigh is actually put into
* KVD linear area of this group.
*/
update:1; /* set indicates that MAC of this neigh should be
* updated in HW
*/
struct mlxsw_sp_neigh_entry *neigh_entry;
};
struct mlxsw_sp_nexthop_group_key {
struct fib_info *fi;
};
struct mlxsw_sp_nexthop_group {
struct rhash_head ht_node;
struct list_head fib_list; /* list of fib entries that use this group */
struct mlxsw_sp_nexthop_group_key key;
u8 adj_index_valid:1,
gateway:1; /* routes using the group use a gateway */
u32 adj_index;
u16 ecmp_size;
u16 count;
struct mlxsw_sp_nexthop nexthops[0];
#define nh_rif nexthops[0].rif
};
static const struct rhashtable_params mlxsw_sp_nexthop_group_ht_params = {
.key_offset = offsetof(struct mlxsw_sp_nexthop_group, key),
.head_offset = offsetof(struct mlxsw_sp_nexthop_group, ht_node),
.key_len = sizeof(struct mlxsw_sp_nexthop_group_key),
};
static int mlxsw_sp_nexthop_group_insert(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp)
{
return rhashtable_insert_fast(&mlxsw_sp->router->nexthop_group_ht,
&nh_grp->ht_node,
mlxsw_sp_nexthop_group_ht_params);
}
static void mlxsw_sp_nexthop_group_remove(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp)
{
rhashtable_remove_fast(&mlxsw_sp->router->nexthop_group_ht,
&nh_grp->ht_node,
mlxsw_sp_nexthop_group_ht_params);
}
static struct mlxsw_sp_nexthop_group *
mlxsw_sp_nexthop_group_lookup(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group_key key)
{
return rhashtable_lookup_fast(&mlxsw_sp->router->nexthop_group_ht, &key,
mlxsw_sp_nexthop_group_ht_params);
}
static const struct rhashtable_params mlxsw_sp_nexthop_ht_params = {
.key_offset = offsetof(struct mlxsw_sp_nexthop, key),
.head_offset = offsetof(struct mlxsw_sp_nexthop, ht_node),
.key_len = sizeof(struct mlxsw_sp_nexthop_key),
};
static int mlxsw_sp_nexthop_insert(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop *nh)
{
return rhashtable_insert_fast(&mlxsw_sp->router->nexthop_ht,
&nh->ht_node, mlxsw_sp_nexthop_ht_params);
}
static void mlxsw_sp_nexthop_remove(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop *nh)
{
rhashtable_remove_fast(&mlxsw_sp->router->nexthop_ht, &nh->ht_node,
mlxsw_sp_nexthop_ht_params);
}
static struct mlxsw_sp_nexthop *
mlxsw_sp_nexthop_lookup(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_key key)
{
return rhashtable_lookup_fast(&mlxsw_sp->router->nexthop_ht, &key,
mlxsw_sp_nexthop_ht_params);
}
static int mlxsw_sp_adj_index_mass_update_vr(struct mlxsw_sp *mlxsw_sp,
const struct mlxsw_sp_fib *fib,
u32 adj_index, u16 ecmp_size,
u32 new_adj_index,
u16 new_ecmp_size)
{
char raleu_pl[MLXSW_REG_RALEU_LEN];
mlxsw: spectrum: Fix sparse warnings drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 00:29:26 -06:00
mlxsw_reg_raleu_pack(raleu_pl,
(enum mlxsw_reg_ralxx_protocol) fib->proto,
fib->vr->id, adj_index, ecmp_size, new_adj_index,
mlxsw: spectrum: Fix sparse warnings drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 00:29:26 -06:00
new_ecmp_size);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(raleu), raleu_pl);
}
static int mlxsw_sp_adj_index_mass_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp,
u32 old_adj_index, u16 old_ecmp_size)
{
struct mlxsw_sp_fib_entry *fib_entry;
struct mlxsw_sp_fib *fib = NULL;
int err;
list_for_each_entry(fib_entry, &nh_grp->fib_list, nexthop_group_node) {
if (fib == fib_entry->fib_node->fib)
continue;
fib = fib_entry->fib_node->fib;
err = mlxsw_sp_adj_index_mass_update_vr(mlxsw_sp, fib,
old_adj_index,
old_ecmp_size,
nh_grp->adj_index,
nh_grp->ecmp_size);
if (err)
return err;
}
return 0;
}
static int mlxsw_sp_nexthop_mac_update(struct mlxsw_sp *mlxsw_sp, u32 adj_index,
struct mlxsw_sp_nexthop *nh)
{
struct mlxsw_sp_neigh_entry *neigh_entry = nh->neigh_entry;
char ratr_pl[MLXSW_REG_RATR_LEN];
mlxsw_reg_ratr_pack(ratr_pl, MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY,
true, adj_index, neigh_entry->rif);
mlxsw_reg_ratr_eth_entry_pack(ratr_pl, neigh_entry->ha);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ratr), ratr_pl);
}
static int
mlxsw_sp_nexthop_group_mac_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp,
bool reallocate)
{
u32 adj_index = nh_grp->adj_index; /* base */
struct mlxsw_sp_nexthop *nh;
int i;
int err;
for (i = 0; i < nh_grp->count; i++) {
nh = &nh_grp->nexthops[i];
if (!nh->should_offload) {
nh->offloaded = 0;
continue;
}
if (nh->update || reallocate) {
err = mlxsw_sp_nexthop_mac_update(mlxsw_sp,
adj_index, nh);
if (err)
return err;
nh->update = 0;
nh->offloaded = 1;
}
adj_index++;
}
return 0;
}
static int mlxsw_sp_fib_entry_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry);
static int
mlxsw_sp_nexthop_fib_entries_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp)
{
struct mlxsw_sp_fib_entry *fib_entry;
int err;
list_for_each_entry(fib_entry, &nh_grp->fib_list, nexthop_group_node) {
err = mlxsw_sp_fib_entry_update(mlxsw_sp, fib_entry);
if (err)
return err;
}
return 0;
}
static void
mlxsw_sp_nexthop_group_refresh(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp)
{
struct mlxsw_sp_nexthop *nh;
bool offload_change = false;
u32 adj_index;
u16 ecmp_size = 0;
bool old_adj_index_valid;
u32 old_adj_index;
u16 old_ecmp_size;
int i;
int err;
if (!nh_grp->gateway) {
mlxsw_sp_nexthop_fib_entries_update(mlxsw_sp, nh_grp);
return;
}
for (i = 0; i < nh_grp->count; i++) {
nh = &nh_grp->nexthops[i];
if (nh->should_offload ^ nh->offloaded) {
offload_change = true;
if (nh->should_offload)
nh->update = 1;
}
if (nh->should_offload)
ecmp_size++;
}
if (!offload_change) {
/* Nothing was added or removed, so no need to reallocate. Just
* update MAC on existing adjacency indexes.
*/
err = mlxsw_sp_nexthop_group_mac_update(mlxsw_sp, nh_grp,
false);
if (err) {
dev_warn(mlxsw_sp->bus_info->dev, "Failed to update neigh MAC in adjacency table.\n");
goto set_trap;
}
return;
}
if (!ecmp_size)
/* No neigh of this group is connected so we just set
* the trap and let everthing flow through kernel.
*/
goto set_trap;
err = mlxsw_sp_kvdl_alloc(mlxsw_sp, ecmp_size, &adj_index);
if (err) {
/* We ran out of KVD linear space, just set the
* trap and let everything flow through kernel.
*/
dev_warn(mlxsw_sp->bus_info->dev, "Failed to allocate KVD linear area for nexthop group.\n");
goto set_trap;
}
old_adj_index_valid = nh_grp->adj_index_valid;
old_adj_index = nh_grp->adj_index;
old_ecmp_size = nh_grp->ecmp_size;
nh_grp->adj_index_valid = 1;
nh_grp->adj_index = adj_index;
nh_grp->ecmp_size = ecmp_size;
err = mlxsw_sp_nexthop_group_mac_update(mlxsw_sp, nh_grp, true);
if (err) {
dev_warn(mlxsw_sp->bus_info->dev, "Failed to update neigh MAC in adjacency table.\n");
goto set_trap;
}
if (!old_adj_index_valid) {
/* The trap was set for fib entries, so we have to call
* fib entry update to unset it and use adjacency index.
*/
err = mlxsw_sp_nexthop_fib_entries_update(mlxsw_sp, nh_grp);
if (err) {
dev_warn(mlxsw_sp->bus_info->dev, "Failed to add adjacency index to fib entries.\n");
goto set_trap;
}
return;
}
err = mlxsw_sp_adj_index_mass_update(mlxsw_sp, nh_grp,
old_adj_index, old_ecmp_size);
mlxsw_sp_kvdl_free(mlxsw_sp, old_adj_index);
if (err) {
dev_warn(mlxsw_sp->bus_info->dev, "Failed to mass-update adjacency index for nexthop group.\n");
goto set_trap;
}
return;
set_trap:
old_adj_index_valid = nh_grp->adj_index_valid;
nh_grp->adj_index_valid = 0;
for (i = 0; i < nh_grp->count; i++) {
nh = &nh_grp->nexthops[i];
nh->offloaded = 0;
}
err = mlxsw_sp_nexthop_fib_entries_update(mlxsw_sp, nh_grp);
if (err)
dev_warn(mlxsw_sp->bus_info->dev, "Failed to set traps for fib entries.\n");
if (old_adj_index_valid)
mlxsw_sp_kvdl_free(mlxsw_sp, nh_grp->adj_index);
}
static void __mlxsw_sp_nexthop_neigh_update(struct mlxsw_sp_nexthop *nh,
bool removing)
{
if (!removing && !nh->should_offload)
nh->should_offload = 1;
else if (removing && nh->offloaded)
nh->should_offload = 0;
nh->update = 1;
}
static void
mlxsw_sp_nexthop_neigh_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_neigh_entry *neigh_entry,
bool removing)
{
struct mlxsw_sp_nexthop *nh;
list_for_each_entry(nh, &neigh_entry->nexthop_list,
neigh_list_node) {
__mlxsw_sp_nexthop_neigh_update(nh, removing);
mlxsw_sp_nexthop_group_refresh(mlxsw_sp, nh->nh_grp);
}
}
static void mlxsw_sp_nexthop_rif_init(struct mlxsw_sp_nexthop *nh,
struct mlxsw_sp_rif *rif)
{
if (nh->rif)
return;
nh->rif = rif;
list_add(&nh->rif_list_node, &rif->nexthop_list);
}
static void mlxsw_sp_nexthop_rif_fini(struct mlxsw_sp_nexthop *nh)
{
if (!nh->rif)
return;
list_del(&nh->rif_list_node);
nh->rif = NULL;
}
static int mlxsw_sp_nexthop_neigh_init(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop *nh)
{
struct mlxsw_sp_neigh_entry *neigh_entry;
struct fib_nh *fib_nh = nh->key.fib_nh;
struct neighbour *n;
u8 nud_state, dead;
int err;
if (!nh->nh_grp->gateway || nh->neigh_entry)
return 0;
/* Take a reference of neigh here ensuring that neigh would
* not be detructed before the nexthop entry is finished.
* The reference is taken either in neigh_lookup() or
* in neigh_create() in case n is not found.
*/
n = neigh_lookup(&arp_tbl, &fib_nh->nh_gw, fib_nh->nh_dev);
if (!n) {
n = neigh_create(&arp_tbl, &fib_nh->nh_gw, fib_nh->nh_dev);
if (IS_ERR(n))
return PTR_ERR(n);
neigh_event_send(n, NULL);
}
neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n);
if (!neigh_entry) {
neigh_entry = mlxsw_sp_neigh_entry_create(mlxsw_sp, n);
if (IS_ERR(neigh_entry)) {
err = -EINVAL;
goto err_neigh_entry_create;
}
}
/* If that is the first nexthop connected to that neigh, add to
* nexthop_neighs_list
*/
if (list_empty(&neigh_entry->nexthop_list))
list_add_tail(&neigh_entry->nexthop_neighs_list_node,
&mlxsw_sp->router->nexthop_neighs_list);
nh->neigh_entry = neigh_entry;
list_add_tail(&nh->neigh_list_node, &neigh_entry->nexthop_list);
read_lock_bh(&n->lock);
nud_state = n->nud_state;
dead = n->dead;
read_unlock_bh(&n->lock);
__mlxsw_sp_nexthop_neigh_update(nh, !(nud_state & NUD_VALID && !dead));
return 0;
err_neigh_entry_create:
neigh_release(n);
return err;
}
static void mlxsw_sp_nexthop_neigh_fini(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop *nh)
{
struct mlxsw_sp_neigh_entry *neigh_entry = nh->neigh_entry;
struct neighbour *n;
if (!neigh_entry)
return;
n = neigh_entry->key.n;
__mlxsw_sp_nexthop_neigh_update(nh, true);
list_del(&nh->neigh_list_node);
nh->neigh_entry = NULL;
/* If that is the last nexthop connected to that neigh, remove from
* nexthop_neighs_list
*/
if (list_empty(&neigh_entry->nexthop_list))
list_del(&neigh_entry->nexthop_neighs_list_node);
if (!neigh_entry->connected && list_empty(&neigh_entry->nexthop_list))
mlxsw_sp_neigh_entry_destroy(mlxsw_sp, neigh_entry);
neigh_release(n);
}
static int mlxsw_sp_nexthop_init(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp,
struct mlxsw_sp_nexthop *nh,
struct fib_nh *fib_nh)
{
struct net_device *dev = fib_nh->nh_dev;
struct in_device *in_dev;
struct mlxsw_sp_rif *rif;
int err;
nh->nh_grp = nh_grp;
nh->key.fib_nh = fib_nh;
err = mlxsw_sp_nexthop_insert(mlxsw_sp, nh);
if (err)
return err;
if (!dev)
return 0;
in_dev = __in_dev_get_rtnl(dev);
if (in_dev && IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN(in_dev) &&
fib_nh->nh_flags & RTNH_F_LINKDOWN)
return 0;
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, dev);
if (!rif)
return 0;
mlxsw_sp_nexthop_rif_init(nh, rif);
err = mlxsw_sp_nexthop_neigh_init(mlxsw_sp, nh);
if (err)
goto err_nexthop_neigh_init;
return 0;
err_nexthop_neigh_init:
mlxsw_sp_nexthop_remove(mlxsw_sp, nh);
return err;
}
static void mlxsw_sp_nexthop_fini(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop *nh)
{
mlxsw_sp_nexthop_neigh_fini(mlxsw_sp, nh);
mlxsw_sp_nexthop_rif_fini(nh);
mlxsw_sp_nexthop_remove(mlxsw_sp, nh);
}
static void mlxsw_sp_nexthop_event(struct mlxsw_sp *mlxsw_sp,
unsigned long event, struct fib_nh *fib_nh)
{
struct mlxsw_sp_nexthop_key key;
struct mlxsw_sp_nexthop *nh;
struct mlxsw_sp_rif *rif;
if (mlxsw_sp->router->aborted)
return;
key.fib_nh = fib_nh;
nh = mlxsw_sp_nexthop_lookup(mlxsw_sp, key);
if (WARN_ON_ONCE(!nh))
return;
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, fib_nh->nh_dev);
if (!rif)
return;
switch (event) {
case FIB_EVENT_NH_ADD:
mlxsw_sp_nexthop_rif_init(nh, rif);
mlxsw_sp_nexthop_neigh_init(mlxsw_sp, nh);
break;
case FIB_EVENT_NH_DEL:
mlxsw_sp_nexthop_neigh_fini(mlxsw_sp, nh);
mlxsw_sp_nexthop_rif_fini(nh);
break;
}
mlxsw_sp_nexthop_group_refresh(mlxsw_sp, nh->nh_grp);
}
static void mlxsw_sp_nexthop_rif_gone_sync(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp_nexthop *nh, *tmp;
list_for_each_entry_safe(nh, tmp, &rif->nexthop_list, rif_list_node) {
mlxsw_sp_nexthop_neigh_fini(mlxsw_sp, nh);
mlxsw_sp_nexthop_rif_fini(nh);
mlxsw_sp_nexthop_group_refresh(mlxsw_sp, nh->nh_grp);
}
}
static struct mlxsw_sp_nexthop_group *
mlxsw_sp_nexthop_group_create(struct mlxsw_sp *mlxsw_sp, struct fib_info *fi)
{
struct mlxsw_sp_nexthop_group *nh_grp;
struct mlxsw_sp_nexthop *nh;
struct fib_nh *fib_nh;
size_t alloc_size;
int i;
int err;
alloc_size = sizeof(*nh_grp) +
fi->fib_nhs * sizeof(struct mlxsw_sp_nexthop);
nh_grp = kzalloc(alloc_size, GFP_KERNEL);
if (!nh_grp)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&nh_grp->fib_list);
nh_grp->gateway = fi->fib_nh->nh_scope == RT_SCOPE_LINK;
nh_grp->count = fi->fib_nhs;
nh_grp->key.fi = fi;
for (i = 0; i < nh_grp->count; i++) {
nh = &nh_grp->nexthops[i];
fib_nh = &fi->fib_nh[i];
err = mlxsw_sp_nexthop_init(mlxsw_sp, nh_grp, nh, fib_nh);
if (err)
goto err_nexthop_init;
}
err = mlxsw_sp_nexthop_group_insert(mlxsw_sp, nh_grp);
if (err)
goto err_nexthop_group_insert;
mlxsw_sp_nexthop_group_refresh(mlxsw_sp, nh_grp);
return nh_grp;
err_nexthop_group_insert:
err_nexthop_init:
for (i--; i >= 0; i--) {
nh = &nh_grp->nexthops[i];
mlxsw_sp_nexthop_fini(mlxsw_sp, nh);
}
kfree(nh_grp);
return ERR_PTR(err);
}
static void
mlxsw_sp_nexthop_group_destroy(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_nexthop_group *nh_grp)
{
struct mlxsw_sp_nexthop *nh;
int i;
mlxsw_sp_nexthop_group_remove(mlxsw_sp, nh_grp);
for (i = 0; i < nh_grp->count; i++) {
nh = &nh_grp->nexthops[i];
mlxsw_sp_nexthop_fini(mlxsw_sp, nh);
}
mlxsw_sp_nexthop_group_refresh(mlxsw_sp, nh_grp);
WARN_ON_ONCE(nh_grp->adj_index_valid);
kfree(nh_grp);
}
static int mlxsw_sp_nexthop_group_get(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
struct fib_info *fi)
{
struct mlxsw_sp_nexthop_group_key key;
struct mlxsw_sp_nexthop_group *nh_grp;
key.fi = fi;
nh_grp = mlxsw_sp_nexthop_group_lookup(mlxsw_sp, key);
if (!nh_grp) {
nh_grp = mlxsw_sp_nexthop_group_create(mlxsw_sp, fi);
if (IS_ERR(nh_grp))
return PTR_ERR(nh_grp);
}
list_add_tail(&fib_entry->nexthop_group_node, &nh_grp->fib_list);
fib_entry->nh_group = nh_grp;
return 0;
}
static void mlxsw_sp_nexthop_group_put(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry)
{
struct mlxsw_sp_nexthop_group *nh_grp = fib_entry->nh_group;
list_del(&fib_entry->nexthop_group_node);
if (!list_empty(&nh_grp->fib_list))
return;
mlxsw_sp_nexthop_group_destroy(mlxsw_sp, nh_grp);
}
static bool
mlxsw_sp_fib_entry_should_offload(const struct mlxsw_sp_fib_entry *fib_entry)
{
struct mlxsw_sp_nexthop_group *nh_group = fib_entry->nh_group;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
if (fib_entry->params.tos)
return false;
switch (fib_entry->type) {
case MLXSW_SP_FIB_ENTRY_TYPE_REMOTE:
return !!nh_group->adj_index_valid;
case MLXSW_SP_FIB_ENTRY_TYPE_LOCAL:
2017-02-08 03:16:38 -07:00
return !!nh_group->nh_rif;
default:
return false;
}
}
static void mlxsw_sp_fib_entry_offload_set(struct mlxsw_sp_fib_entry *fib_entry)
{
fib_entry->offloaded = true;
switch (fib_entry->fib_node->fib->proto) {
case MLXSW_SP_L3_PROTO_IPV4:
fib_info_offload_inc(fib_entry->nh_group->key.fi);
break;
case MLXSW_SP_L3_PROTO_IPV6:
WARN_ON_ONCE(1);
}
}
static void
mlxsw_sp_fib_entry_offload_unset(struct mlxsw_sp_fib_entry *fib_entry)
{
switch (fib_entry->fib_node->fib->proto) {
case MLXSW_SP_L3_PROTO_IPV4:
fib_info_offload_dec(fib_entry->nh_group->key.fi);
break;
case MLXSW_SP_L3_PROTO_IPV6:
WARN_ON_ONCE(1);
}
fib_entry->offloaded = false;
}
static void
mlxsw_sp_fib_entry_offload_refresh(struct mlxsw_sp_fib_entry *fib_entry,
enum mlxsw_reg_ralue_op op, int err)
{
switch (op) {
case MLXSW_REG_RALUE_OP_WRITE_DELETE:
if (!fib_entry->offloaded)
return;
return mlxsw_sp_fib_entry_offload_unset(fib_entry);
case MLXSW_REG_RALUE_OP_WRITE_WRITE:
if (err)
return;
if (mlxsw_sp_fib_entry_should_offload(fib_entry) &&
!fib_entry->offloaded)
mlxsw_sp_fib_entry_offload_set(fib_entry);
else if (!mlxsw_sp_fib_entry_should_offload(fib_entry) &&
fib_entry->offloaded)
mlxsw_sp_fib_entry_offload_unset(fib_entry);
return;
default:
return;
}
}
static int mlxsw_sp_fib_entry_op4_remote(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
enum mlxsw_reg_ralue_op op)
{
char ralue_pl[MLXSW_REG_RALUE_LEN];
struct mlxsw_sp_fib *fib = fib_entry->fib_node->fib;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
u32 *p_dip = (u32 *) fib_entry->fib_node->key.addr;
enum mlxsw_reg_ralue_trap_action trap_action;
u16 trap_id = 0;
u32 adjacency_index = 0;
u16 ecmp_size = 0;
/* In case the nexthop group adjacency index is valid, use it
* with provided ECMP size. Otherwise, setup trap and pass
* traffic to kernel.
*/
if (mlxsw_sp_fib_entry_should_offload(fib_entry)) {
trap_action = MLXSW_REG_RALUE_TRAP_ACTION_NOP;
adjacency_index = fib_entry->nh_group->adj_index;
ecmp_size = fib_entry->nh_group->ecmp_size;
} else {
trap_action = MLXSW_REG_RALUE_TRAP_ACTION_TRAP;
trap_id = MLXSW_TRAP_ID_RTR_INGRESS0;
}
mlxsw: spectrum: Fix sparse warnings drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 00:29:26 -06:00
mlxsw_reg_ralue_pack4(ralue_pl,
(enum mlxsw_reg_ralxx_protocol) fib->proto, op,
fib->vr->id, fib_entry->fib_node->key.prefix_len,
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
*p_dip);
mlxsw_reg_ralue_act_remote_pack(ralue_pl, trap_action, trap_id,
adjacency_index, ecmp_size);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralue), ralue_pl);
}
static int mlxsw_sp_fib_entry_op4_local(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
enum mlxsw_reg_ralue_op op)
{
struct mlxsw_sp_rif *rif = fib_entry->nh_group->nh_rif;
struct mlxsw_sp_fib *fib = fib_entry->fib_node->fib;
2017-02-08 03:16:38 -07:00
enum mlxsw_reg_ralue_trap_action trap_action;
char ralue_pl[MLXSW_REG_RALUE_LEN];
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
u32 *p_dip = (u32 *) fib_entry->fib_node->key.addr;
2017-02-08 03:16:38 -07:00
u16 trap_id = 0;
u16 rif_index = 0;
2017-02-08 03:16:38 -07:00
if (mlxsw_sp_fib_entry_should_offload(fib_entry)) {
trap_action = MLXSW_REG_RALUE_TRAP_ACTION_NOP;
rif_index = rif->rif_index;
2017-02-08 03:16:38 -07:00
} else {
trap_action = MLXSW_REG_RALUE_TRAP_ACTION_TRAP;
trap_id = MLXSW_TRAP_ID_RTR_INGRESS0;
}
mlxsw: spectrum: Fix sparse warnings drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 00:29:26 -06:00
mlxsw_reg_ralue_pack4(ralue_pl,
(enum mlxsw_reg_ralxx_protocol) fib->proto, op,
fib->vr->id, fib_entry->fib_node->key.prefix_len,
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
*p_dip);
mlxsw_reg_ralue_act_local_pack(ralue_pl, trap_action, trap_id,
rif_index);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralue), ralue_pl);
}
static int mlxsw_sp_fib_entry_op4_trap(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
enum mlxsw_reg_ralue_op op)
{
struct mlxsw_sp_fib *fib = fib_entry->fib_node->fib;
char ralue_pl[MLXSW_REG_RALUE_LEN];
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
u32 *p_dip = (u32 *) fib_entry->fib_node->key.addr;
mlxsw: spectrum: Fix sparse warnings drivers/net/ethernet/mellanox/mlxsw//spectrum.c:251:28: warning: symbol 'mlxsw_sp_span_entry_find' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:265:28: warning: symbol 'mlxsw_sp_span_entry_get' was not declared. Should it be static? drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_sp_span_type versus drivers/net/ethernet/mellanox/mlxsw//spectrum.c:367:56: int enum mlxsw_reg_mpar_i_e ... drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum mlxsw_reg_sbxx_dir versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:598:32: int enum devlink_sb_pool_type drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum mlxsw_reg_sbpr_mode versus drivers/net/ethernet/mellanox/mlxsw//spectrum_buffers.c:600:39: int enum devlink_sb_threshold_type ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: warning: mixing different enum types drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_sp_l3proto versus drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:255:54: int enum mlxsw_reg_ralxx_protocol ... drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1749:6: warning: symbol 'mlxsw_sp_fib_entry_put' was not declared. Should it be static? Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19 00:29:26 -06:00
mlxsw_reg_ralue_pack4(ralue_pl,
(enum mlxsw_reg_ralxx_protocol) fib->proto, op,
fib->vr->id, fib_entry->fib_node->key.prefix_len,
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
*p_dip);
mlxsw_reg_ralue_act_ip2me_pack(ralue_pl);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralue), ralue_pl);
}
static int mlxsw_sp_fib_entry_op4(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
enum mlxsw_reg_ralue_op op)
{
switch (fib_entry->type) {
case MLXSW_SP_FIB_ENTRY_TYPE_REMOTE:
return mlxsw_sp_fib_entry_op4_remote(mlxsw_sp, fib_entry, op);
case MLXSW_SP_FIB_ENTRY_TYPE_LOCAL:
return mlxsw_sp_fib_entry_op4_local(mlxsw_sp, fib_entry, op);
case MLXSW_SP_FIB_ENTRY_TYPE_TRAP:
return mlxsw_sp_fib_entry_op4_trap(mlxsw_sp, fib_entry, op);
}
return -EINVAL;
}
static int mlxsw_sp_fib_entry_op(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
enum mlxsw_reg_ralue_op op)
{
int err = -EINVAL;
switch (fib_entry->fib_node->fib->proto) {
case MLXSW_SP_L3_PROTO_IPV4:
err = mlxsw_sp_fib_entry_op4(mlxsw_sp, fib_entry, op);
break;
case MLXSW_SP_L3_PROTO_IPV6:
return err;
}
mlxsw_sp_fib_entry_offload_refresh(fib_entry, op, err);
return err;
}
static int mlxsw_sp_fib_entry_update(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry)
{
return mlxsw_sp_fib_entry_op(mlxsw_sp, fib_entry,
MLXSW_REG_RALUE_OP_WRITE_WRITE);
}
static int mlxsw_sp_fib_entry_del(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry)
{
return mlxsw_sp_fib_entry_op(mlxsw_sp, fib_entry,
MLXSW_REG_RALUE_OP_WRITE_DELETE);
}
static int
mlxsw_sp_fib4_entry_type_set(struct mlxsw_sp *mlxsw_sp,
const struct fib_entry_notifier_info *fen_info,
struct mlxsw_sp_fib_entry *fib_entry)
{
struct fib_info *fi = fen_info->fi;
switch (fen_info->type) {
case RTN_BROADCAST: /* fall through */
case RTN_LOCAL:
fib_entry->type = MLXSW_SP_FIB_ENTRY_TYPE_TRAP;
return 0;
case RTN_UNREACHABLE: /* fall through */
case RTN_BLACKHOLE: /* fall through */
case RTN_PROHIBIT:
/* Packets hitting these routes need to be trapped, but
* can do so with a lower priority than packets directed
* at the host, so use action type local instead of trap.
*/
fib_entry->type = MLXSW_SP_FIB_ENTRY_TYPE_LOCAL;
return 0;
case RTN_UNICAST:
if (fi->fib_nh->nh_scope != RT_SCOPE_LINK)
fib_entry->type = MLXSW_SP_FIB_ENTRY_TYPE_LOCAL;
else
fib_entry->type = MLXSW_SP_FIB_ENTRY_TYPE_REMOTE;
return 0;
default:
return -EINVAL;
}
}
static struct mlxsw_sp_fib_entry *
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
mlxsw_sp_fib4_entry_create(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_node *fib_node,
const struct fib_entry_notifier_info *fen_info)
{
struct mlxsw_sp_fib_entry *fib_entry;
int err;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_entry = kzalloc(sizeof(*fib_entry), GFP_KERNEL);
if (!fib_entry) {
err = -ENOMEM;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
goto err_fib_entry_alloc;
}
err = mlxsw_sp_fib4_entry_type_set(mlxsw_sp, fen_info, fib_entry);
if (err)
goto err_fib4_entry_type_set;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
err = mlxsw_sp_nexthop_group_get(mlxsw_sp, fib_entry, fen_info->fi);
if (err)
goto err_nexthop_group_get;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_entry->params.prio = fen_info->fi->fib_priority;
fib_entry->params.tb_id = fen_info->tb_id;
fib_entry->params.type = fen_info->type;
fib_entry->params.tos = fen_info->tos;
fib_entry->fib_node = fib_node;
return fib_entry;
err_nexthop_group_get:
err_fib4_entry_type_set:
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
kfree(fib_entry);
err_fib_entry_alloc:
return ERR_PTR(err);
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static void mlxsw_sp_fib4_entry_destroy(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry)
{
mlxsw_sp_nexthop_group_put(mlxsw_sp, fib_entry);
kfree(fib_entry);
}
static struct mlxsw_sp_fib_node *
mlxsw_sp_fib4_node_get(struct mlxsw_sp *mlxsw_sp,
const struct fib_entry_notifier_info *fen_info);
static struct mlxsw_sp_fib_entry *
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
mlxsw_sp_fib4_entry_lookup(struct mlxsw_sp *mlxsw_sp,
const struct fib_entry_notifier_info *fen_info)
{
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct mlxsw_sp_fib_entry *fib_entry;
struct mlxsw_sp_fib_node *fib_node;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_node = mlxsw_sp_fib4_node_get(mlxsw_sp, fen_info);
if (IS_ERR(fib_node))
return NULL;
list_for_each_entry(fib_entry, &fib_node->entry_list, list) {
if (fib_entry->params.tb_id == fen_info->tb_id &&
fib_entry->params.tos == fen_info->tos &&
fib_entry->params.type == fen_info->type &&
fib_entry->nh_group->key.fi == fen_info->fi) {
return fib_entry;
}
}
return NULL;
}
static const struct rhashtable_params mlxsw_sp_fib_ht_params = {
.key_offset = offsetof(struct mlxsw_sp_fib_node, key),
.head_offset = offsetof(struct mlxsw_sp_fib_node, ht_node),
.key_len = sizeof(struct mlxsw_sp_fib_key),
.automatic_shrinking = true,
};
static int mlxsw_sp_fib_node_insert(struct mlxsw_sp_fib *fib,
struct mlxsw_sp_fib_node *fib_node)
{
return rhashtable_insert_fast(&fib->ht, &fib_node->ht_node,
mlxsw_sp_fib_ht_params);
}
static void mlxsw_sp_fib_node_remove(struct mlxsw_sp_fib *fib,
struct mlxsw_sp_fib_node *fib_node)
{
rhashtable_remove_fast(&fib->ht, &fib_node->ht_node,
mlxsw_sp_fib_ht_params);
}
static struct mlxsw_sp_fib_node *
mlxsw_sp_fib_node_lookup(struct mlxsw_sp_fib *fib, const void *addr,
size_t addr_len, unsigned char prefix_len)
{
struct mlxsw_sp_fib_key key;
memset(&key, 0, sizeof(key));
memcpy(key.addr, addr, addr_len);
key.prefix_len = prefix_len;
return rhashtable_lookup_fast(&fib->ht, &key, mlxsw_sp_fib_ht_params);
}
static struct mlxsw_sp_fib_node *
mlxsw_sp_fib_node_create(struct mlxsw_sp_fib *fib, const void *addr,
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
size_t addr_len, unsigned char prefix_len)
{
struct mlxsw_sp_fib_node *fib_node;
fib_node = kzalloc(sizeof(*fib_node), GFP_KERNEL);
if (!fib_node)
return NULL;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
INIT_LIST_HEAD(&fib_node->entry_list);
list_add(&fib_node->list, &fib->node_list);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
memcpy(fib_node->key.addr, addr, addr_len);
fib_node->key.prefix_len = prefix_len;
return fib_node;
}
static void mlxsw_sp_fib_node_destroy(struct mlxsw_sp_fib_node *fib_node)
{
list_del(&fib_node->list);
WARN_ON(!list_empty(&fib_node->entry_list));
kfree(fib_node);
}
static bool
mlxsw_sp_fib_node_entry_is_first(const struct mlxsw_sp_fib_node *fib_node,
const struct mlxsw_sp_fib_entry *fib_entry)
{
return list_first_entry(&fib_node->entry_list,
struct mlxsw_sp_fib_entry, list) == fib_entry;
}
static void mlxsw_sp_fib_node_prefix_inc(struct mlxsw_sp_fib_node *fib_node)
{
unsigned char prefix_len = fib_node->key.prefix_len;
struct mlxsw_sp_fib *fib = fib_node->fib;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
if (fib->prefix_ref_count[prefix_len]++ == 0)
mlxsw_sp_prefix_usage_set(&fib->prefix_usage, prefix_len);
}
static void mlxsw_sp_fib_node_prefix_dec(struct mlxsw_sp_fib_node *fib_node)
{
unsigned char prefix_len = fib_node->key.prefix_len;
struct mlxsw_sp_fib *fib = fib_node->fib;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
if (--fib->prefix_ref_count[prefix_len] == 0)
mlxsw_sp_prefix_usage_clear(&fib->prefix_usage, prefix_len);
}
static int mlxsw_sp_fib_node_init(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_node *fib_node,
struct mlxsw_sp_fib *fib)
{
struct mlxsw_sp_prefix_usage req_prefix_usage;
struct mlxsw_sp_lpm_tree *lpm_tree;
int err;
err = mlxsw_sp_fib_node_insert(fib, fib_node);
if (err)
return err;
fib_node->fib = fib;
mlxsw_sp_prefix_usage_cpy(&req_prefix_usage, &fib->prefix_usage);
mlxsw_sp_prefix_usage_set(&req_prefix_usage, fib_node->key.prefix_len);
if (!mlxsw_sp_prefix_usage_none(&fib->prefix_usage)) {
err = mlxsw_sp_vr_lpm_tree_check(mlxsw_sp, fib,
&req_prefix_usage);
if (err)
goto err_tree_check;
} else {
lpm_tree = mlxsw_sp_lpm_tree_get(mlxsw_sp, &req_prefix_usage,
fib->proto);
if (IS_ERR(lpm_tree))
return PTR_ERR(lpm_tree);
fib->lpm_tree = lpm_tree;
err = mlxsw_sp_vr_lpm_tree_bind(mlxsw_sp, fib);
if (err)
goto err_tree_bind;
}
mlxsw_sp_fib_node_prefix_inc(fib_node);
return 0;
err_tree_bind:
fib->lpm_tree = NULL;
mlxsw_sp_lpm_tree_put(mlxsw_sp, lpm_tree);
err_tree_check:
fib_node->fib = NULL;
mlxsw_sp_fib_node_remove(fib, fib_node);
return err;
}
static void mlxsw_sp_fib_node_fini(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_node *fib_node)
{
struct mlxsw_sp_lpm_tree *lpm_tree = fib_node->fib->lpm_tree;
struct mlxsw_sp_fib *fib = fib_node->fib;
mlxsw_sp_fib_node_prefix_dec(fib_node);
if (mlxsw_sp_prefix_usage_none(&fib->prefix_usage)) {
mlxsw_sp_vr_lpm_tree_unbind(mlxsw_sp, fib);
fib->lpm_tree = NULL;
mlxsw_sp_lpm_tree_put(mlxsw_sp, lpm_tree);
} else {
mlxsw_sp_vr_lpm_tree_check(mlxsw_sp, fib, &fib->prefix_usage);
}
fib_node->fib = NULL;
mlxsw_sp_fib_node_remove(fib, fib_node);
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static struct mlxsw_sp_fib_node *
mlxsw_sp_fib4_node_get(struct mlxsw_sp *mlxsw_sp,
const struct fib_entry_notifier_info *fen_info)
{
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct mlxsw_sp_fib_node *fib_node;
struct mlxsw_sp_fib *fib;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct mlxsw_sp_vr *vr;
int err;
vr = mlxsw_sp_vr_get(mlxsw_sp, fen_info->tb_id);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
if (IS_ERR(vr))
return ERR_CAST(vr);
fib = mlxsw_sp_vr_fib(vr, MLXSW_SP_L3_PROTO_IPV4);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_node = mlxsw_sp_fib_node_lookup(fib, &fen_info->dst,
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
sizeof(fen_info->dst),
fen_info->dst_len);
if (fib_node)
return fib_node;
fib_node = mlxsw_sp_fib_node_create(fib, &fen_info->dst,
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
sizeof(fen_info->dst),
fen_info->dst_len);
if (!fib_node) {
err = -ENOMEM;
goto err_fib_node_create;
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
err = mlxsw_sp_fib_node_init(mlxsw_sp, fib_node, fib);
if (err)
goto err_fib_node_init;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
return fib_node;
err_fib_node_init:
mlxsw_sp_fib_node_destroy(fib_node);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
err_fib_node_create:
mlxsw_sp_vr_put(vr);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
return ERR_PTR(err);
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static void mlxsw_sp_fib4_node_put(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_node *fib_node)
{
struct mlxsw_sp_vr *vr = fib_node->fib->vr;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
if (!list_empty(&fib_node->entry_list))
return;
mlxsw_sp_fib_node_fini(mlxsw_sp, fib_node);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
mlxsw_sp_fib_node_destroy(fib_node);
mlxsw_sp_vr_put(vr);
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static struct mlxsw_sp_fib_entry *
mlxsw_sp_fib4_node_entry_find(const struct mlxsw_sp_fib_node *fib_node,
const struct mlxsw_sp_fib_entry_params *params)
{
struct mlxsw_sp_fib_entry *fib_entry;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
list_for_each_entry(fib_entry, &fib_node->entry_list, list) {
if (fib_entry->params.tb_id > params->tb_id)
continue;
if (fib_entry->params.tb_id != params->tb_id)
break;
if (fib_entry->params.tos > params->tos)
continue;
if (fib_entry->params.prio >= params->prio ||
fib_entry->params.tos < params->tos)
return fib_entry;
}
return NULL;
}
static int mlxsw_sp_fib4_node_list_append(struct mlxsw_sp_fib_entry *fib_entry,
struct mlxsw_sp_fib_entry *new_entry)
{
struct mlxsw_sp_fib_node *fib_node;
if (WARN_ON(!fib_entry))
return -EINVAL;
fib_node = fib_entry->fib_node;
list_for_each_entry_from(fib_entry, &fib_node->entry_list, list) {
if (fib_entry->params.tb_id != new_entry->params.tb_id ||
fib_entry->params.tos != new_entry->params.tos ||
fib_entry->params.prio != new_entry->params.prio)
break;
}
list_add_tail(&new_entry->list, &fib_entry->list);
return 0;
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static int
mlxsw_sp_fib4_node_list_insert(struct mlxsw_sp_fib_node *fib_node,
struct mlxsw_sp_fib_entry *new_entry,
bool replace, bool append)
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
{
struct mlxsw_sp_fib_entry *fib_entry;
fib_entry = mlxsw_sp_fib4_node_entry_find(fib_node, &new_entry->params);
if (append)
return mlxsw_sp_fib4_node_list_append(fib_entry, new_entry);
if (replace && WARN_ON(!fib_entry))
return -EINVAL;
/* Insert new entry before replaced one, so that we can later
* remove the second.
*/
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
if (fib_entry) {
list_add_tail(&new_entry->list, &fib_entry->list);
} else {
struct mlxsw_sp_fib_entry *last;
list_for_each_entry(last, &fib_node->entry_list, list) {
if (new_entry->params.tb_id > last->params.tb_id)
break;
fib_entry = last;
}
if (fib_entry)
list_add(&new_entry->list, &fib_entry->list);
else
list_add(&new_entry->list, &fib_node->entry_list);
}
return 0;
}
static void
mlxsw_sp_fib4_node_list_remove(struct mlxsw_sp_fib_entry *fib_entry)
{
list_del(&fib_entry->list);
}
static int
mlxsw_sp_fib4_node_entry_add(struct mlxsw_sp *mlxsw_sp,
const struct mlxsw_sp_fib_node *fib_node,
struct mlxsw_sp_fib_entry *fib_entry)
{
if (!mlxsw_sp_fib_node_entry_is_first(fib_node, fib_entry))
return 0;
/* To prevent packet loss, overwrite the previously offloaded
* entry.
*/
if (!list_is_singular(&fib_node->entry_list)) {
enum mlxsw_reg_ralue_op op = MLXSW_REG_RALUE_OP_WRITE_DELETE;
struct mlxsw_sp_fib_entry *n = list_next_entry(fib_entry, list);
mlxsw_sp_fib_entry_offload_refresh(n, op, 0);
}
return mlxsw_sp_fib_entry_update(mlxsw_sp, fib_entry);
}
static void
mlxsw_sp_fib4_node_entry_del(struct mlxsw_sp *mlxsw_sp,
const struct mlxsw_sp_fib_node *fib_node,
struct mlxsw_sp_fib_entry *fib_entry)
{
if (!mlxsw_sp_fib_node_entry_is_first(fib_node, fib_entry))
return;
/* Promote the next entry by overwriting the deleted entry */
if (!list_is_singular(&fib_node->entry_list)) {
struct mlxsw_sp_fib_entry *n = list_next_entry(fib_entry, list);
enum mlxsw_reg_ralue_op op = MLXSW_REG_RALUE_OP_WRITE_DELETE;
mlxsw_sp_fib_entry_update(mlxsw_sp, n);
mlxsw_sp_fib_entry_offload_refresh(fib_entry, op, 0);
return;
}
mlxsw_sp_fib_entry_del(mlxsw_sp, fib_entry);
}
static int mlxsw_sp_fib4_node_entry_link(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
bool replace, bool append)
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
{
struct mlxsw_sp_fib_node *fib_node = fib_entry->fib_node;
int err;
err = mlxsw_sp_fib4_node_list_insert(fib_node, fib_entry, replace,
append);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
if (err)
return err;
err = mlxsw_sp_fib4_node_entry_add(mlxsw_sp, fib_node, fib_entry);
if (err)
goto err_fib4_node_entry_add;
return 0;
err_fib4_node_entry_add:
mlxsw_sp_fib4_node_list_remove(fib_entry);
return err;
}
static void
mlxsw_sp_fib4_node_entry_unlink(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry)
{
struct mlxsw_sp_fib_node *fib_node = fib_entry->fib_node;
mlxsw_sp_fib4_node_entry_del(mlxsw_sp, fib_node, fib_entry);
mlxsw_sp_fib4_node_list_remove(fib_entry);
}
static void mlxsw_sp_fib4_entry_replace(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_entry *fib_entry,
bool replace)
{
struct mlxsw_sp_fib_node *fib_node = fib_entry->fib_node;
struct mlxsw_sp_fib_entry *replaced;
if (!replace)
return;
/* We inserted the new entry before replaced one */
replaced = list_next_entry(fib_entry, list);
mlxsw_sp_fib4_node_entry_unlink(mlxsw_sp, replaced);
mlxsw_sp_fib4_entry_destroy(mlxsw_sp, replaced);
mlxsw_sp_fib4_node_put(mlxsw_sp, fib_node);
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static int
mlxsw_sp_router_fib4_add(struct mlxsw_sp *mlxsw_sp,
const struct fib_entry_notifier_info *fen_info,
bool replace, bool append)
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
{
struct mlxsw_sp_fib_entry *fib_entry;
struct mlxsw_sp_fib_node *fib_node;
int err;
if (mlxsw_sp->router->aborted)
return 0;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_node = mlxsw_sp_fib4_node_get(mlxsw_sp, fen_info);
if (IS_ERR(fib_node)) {
dev_warn(mlxsw_sp->bus_info->dev, "Failed to get FIB node\n");
return PTR_ERR(fib_node);
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_entry = mlxsw_sp_fib4_entry_create(mlxsw_sp, fib_node, fen_info);
if (IS_ERR(fib_entry)) {
dev_warn(mlxsw_sp->bus_info->dev, "Failed to create FIB entry\n");
err = PTR_ERR(fib_entry);
goto err_fib4_entry_create;
}
err = mlxsw_sp_fib4_node_entry_link(mlxsw_sp, fib_entry, replace,
append);
if (err) {
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
dev_warn(mlxsw_sp->bus_info->dev, "Failed to link FIB entry to node\n");
goto err_fib4_node_entry_link;
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
mlxsw_sp_fib4_entry_replace(mlxsw_sp, fib_entry, replace);
return 0;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
err_fib4_node_entry_link:
mlxsw_sp_fib4_entry_destroy(mlxsw_sp, fib_entry);
err_fib4_entry_create:
mlxsw_sp_fib4_node_put(mlxsw_sp, fib_node);
return err;
}
static void mlxsw_sp_router_fib4_del(struct mlxsw_sp *mlxsw_sp,
struct fib_entry_notifier_info *fen_info)
{
struct mlxsw_sp_fib_entry *fib_entry;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct mlxsw_sp_fib_node *fib_node;
if (mlxsw_sp->router->aborted)
return;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_entry = mlxsw_sp_fib4_entry_lookup(mlxsw_sp, fen_info);
if (WARN_ON(!fib_entry))
return;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
fib_node = fib_entry->fib_node;
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
mlxsw_sp_fib4_node_entry_unlink(mlxsw_sp, fib_entry);
mlxsw_sp_fib4_entry_destroy(mlxsw_sp, fib_entry);
mlxsw_sp_fib4_node_put(mlxsw_sp, fib_node);
}
static int mlxsw_sp_router_set_abort_trap(struct mlxsw_sp *mlxsw_sp)
{
char ralta_pl[MLXSW_REG_RALTA_LEN];
char ralst_pl[MLXSW_REG_RALST_LEN];
int i, err;
mlxsw_reg_ralta_pack(ralta_pl, true, MLXSW_REG_RALXX_PROTOCOL_IPV4,
MLXSW_SP_LPM_TREE_MIN);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralta), ralta_pl);
if (err)
return err;
mlxsw_reg_ralst_pack(ralst_pl, 0xff, MLXSW_SP_LPM_TREE_MIN);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralst), ralst_pl);
if (err)
return err;
for (i = 0; i < MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_VRS); i++) {
struct mlxsw_sp_vr *vr = &mlxsw_sp->router->vrs[i];
char raltb_pl[MLXSW_REG_RALTB_LEN];
char ralue_pl[MLXSW_REG_RALUE_LEN];
if (!mlxsw_sp_vr_is_used(vr))
continue;
mlxsw_reg_raltb_pack(raltb_pl, vr->id,
MLXSW_REG_RALXX_PROTOCOL_IPV4,
MLXSW_SP_LPM_TREE_MIN);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(raltb),
raltb_pl);
if (err)
return err;
mlxsw_reg_ralue_pack4(ralue_pl, MLXSW_SP_L3_PROTO_IPV4,
MLXSW_REG_RALUE_OP_WRITE_WRITE, vr->id, 0,
0);
mlxsw_reg_ralue_act_ip2me_pack(ralue_pl);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralue),
ralue_pl);
if (err)
return err;
}
return 0;
}
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
static void mlxsw_sp_fib4_node_flush(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_node *fib_node)
{
struct mlxsw_sp_fib_entry *fib_entry, *tmp;
list_for_each_entry_safe(fib_entry, tmp, &fib_node->entry_list, list) {
bool do_break = &tmp->list == &fib_node->entry_list;
mlxsw_sp_fib4_node_entry_unlink(mlxsw_sp, fib_entry);
mlxsw_sp_fib4_entry_destroy(mlxsw_sp, fib_entry);
mlxsw_sp_fib4_node_put(mlxsw_sp, fib_node);
/* Break when entry list is empty and node was freed.
* Otherwise, we'll access freed memory in the next
* iteration.
*/
if (do_break)
break;
}
}
static void mlxsw_sp_fib_node_flush(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_fib_node *fib_node)
{
switch (fib_node->fib->proto) {
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
case MLXSW_SP_L3_PROTO_IPV4:
mlxsw_sp_fib4_node_flush(mlxsw_sp, fib_node);
break;
case MLXSW_SP_L3_PROTO_IPV6:
WARN_ON_ONCE(1);
break;
}
}
static void mlxsw_sp_vr_fib_flush(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_vr *vr,
enum mlxsw_sp_l3proto proto)
{
struct mlxsw_sp_fib *fib = mlxsw_sp_vr_fib(vr, proto);
mlxsw: spectrum_router: Correctly handle identical routes In the device, routes are indexed in a routing table based on the prefix and its length. This is in contrast to the kernel's FIB where several FIB aliases can exist with these parameters being identical. In such cases, the routes will be sorted by table ID (LOCAL first, then MAIN), TOS and finally priority (metric). During lookup, these routes will be evaluated in order. In case the packet's TOS field is non-zero and a FIB alias with a matching TOS is found, then it's selected. Otherwise, the lookup defaults to the route with TOS 0 (if it exists). However, if the requested scope is narrower than the one found, then the lookup continues. To best reflect the kernel's datapath we should take the above into account. Given a prefix and its length, the reflected route will always be the first one in the FIB alias list. However, if the route has a non-zero TOS then its action will be converted to trap instead of forward, since we currently don't support TOS-based routing. If this turns out to be a real issue, we can add support for that using policy-based switching. The route's scope can be effectively ignored as any packet being routed by the device would've been looked-up using the widest scope (UNIVERSE). To achieve that we need to do two changes. Firstly, we need to create another struct (FIB node) that will hold the list of FIB entries sharing the same prefix and length. This struct will be hashed using these two parameters. Secondly, we need to change the route reflection to match the above logic, so that the first FIB entry in the list will be programmed into the device while the rest will remain in the driver's cache in case of subsequent changes. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09 02:28:42 -07:00
struct mlxsw_sp_fib_node *fib_node, *tmp;
list_for_each_entry_safe(fib_node, tmp, &fib->node_list, list) {
bool do_break = &tmp->list == &fib->node_list;
mlxsw_sp_fib_node_flush(mlxsw_sp, fib_node);
if (do_break)
break;
}
}
static void mlxsw_sp_router_fib_flush(struct mlxsw_sp *mlxsw_sp)
{
int i;
for (i = 0; i < MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_VRS); i++) {
struct mlxsw_sp_vr *vr = &mlxsw_sp->router->vrs[i];
if (!mlxsw_sp_vr_is_used(vr))
continue;
mlxsw_sp_vr_fib_flush(mlxsw_sp, vr, MLXSW_SP_L3_PROTO_IPV4);
}
}
static void mlxsw_sp_router_fib4_abort(struct mlxsw_sp *mlxsw_sp)
{
int err;
if (mlxsw_sp->router->aborted)
return;
dev_warn(mlxsw_sp->bus_info->dev, "FIB abort triggered. Note that FIB entries are no longer being offloaded to this device.\n");
mlxsw_sp_router_fib_flush(mlxsw_sp);
mlxsw_sp->router->aborted = true;
err = mlxsw_sp_router_set_abort_trap(mlxsw_sp);
if (err)
dev_warn(mlxsw_sp->bus_info->dev, "Failed to set abort trap.\n");
}
struct mlxsw_sp_fib_event_work {
struct work_struct work;
union {
struct fib_entry_notifier_info fen_info;
struct fib_rule_notifier_info fr_info;
struct fib_nh_notifier_info fnh_info;
};
struct mlxsw_sp *mlxsw_sp;
unsigned long event;
};
static void mlxsw_sp_router_fib_event_work(struct work_struct *work)
{
struct mlxsw_sp_fib_event_work *fib_work =
container_of(work, struct mlxsw_sp_fib_event_work, work);
struct mlxsw_sp *mlxsw_sp = fib_work->mlxsw_sp;
struct fib_rule *rule;
bool replace, append;
int err;
/* Protect internal structures from changes */
rtnl_lock();
switch (fib_work->event) {
case FIB_EVENT_ENTRY_REPLACE: /* fall through */
case FIB_EVENT_ENTRY_APPEND: /* fall through */
case FIB_EVENT_ENTRY_ADD:
replace = fib_work->event == FIB_EVENT_ENTRY_REPLACE;
append = fib_work->event == FIB_EVENT_ENTRY_APPEND;
err = mlxsw_sp_router_fib4_add(mlxsw_sp, &fib_work->fen_info,
replace, append);
if (err)
mlxsw_sp_router_fib4_abort(mlxsw_sp);
fib_info_put(fib_work->fen_info.fi);
break;
case FIB_EVENT_ENTRY_DEL:
mlxsw_sp_router_fib4_del(mlxsw_sp, &fib_work->fen_info);
fib_info_put(fib_work->fen_info.fi);
break;
case FIB_EVENT_RULE_ADD: /* fall through */
case FIB_EVENT_RULE_DEL:
rule = fib_work->fr_info.rule;
if (!fib4_rule_default(rule) && !rule->l3mdev)
mlxsw_sp_router_fib4_abort(mlxsw_sp);
fib_rule_put(rule);
break;
case FIB_EVENT_NH_ADD: /* fall through */
case FIB_EVENT_NH_DEL:
mlxsw_sp_nexthop_event(mlxsw_sp, fib_work->event,
fib_work->fnh_info.fib_nh);
fib_info_put(fib_work->fnh_info.fib_nh->nh_parent);
break;
}
rtnl_unlock();
kfree(fib_work);
}
/* Called with rcu_read_lock() */
static int mlxsw_sp_router_fib_event(struct notifier_block *nb,
unsigned long event, void *ptr)
{
struct mlxsw_sp_fib_event_work *fib_work;
struct fib_notifier_info *info = ptr;
struct mlxsw_sp_router *router;
if (!net_eq(info->net, &init_net))
return NOTIFY_DONE;
fib_work = kzalloc(sizeof(*fib_work), GFP_ATOMIC);
if (WARN_ON(!fib_work))
return NOTIFY_BAD;
INIT_WORK(&fib_work->work, mlxsw_sp_router_fib_event_work);
router = container_of(nb, struct mlxsw_sp_router, fib_nb);
fib_work->mlxsw_sp = router->mlxsw_sp;
fib_work->event = event;
switch (event) {
case FIB_EVENT_ENTRY_REPLACE: /* fall through */
case FIB_EVENT_ENTRY_APPEND: /* fall through */
case FIB_EVENT_ENTRY_ADD: /* fall through */
case FIB_EVENT_ENTRY_DEL:
memcpy(&fib_work->fen_info, ptr, sizeof(fib_work->fen_info));
/* Take referece on fib_info to prevent it from being
* freed while work is queued. Release it afterwards.
*/
fib_info_hold(fib_work->fen_info.fi);
break;
case FIB_EVENT_RULE_ADD: /* fall through */
case FIB_EVENT_RULE_DEL:
memcpy(&fib_work->fr_info, ptr, sizeof(fib_work->fr_info));
fib_rule_get(fib_work->fr_info.rule);
break;
case FIB_EVENT_NH_ADD: /* fall through */
case FIB_EVENT_NH_DEL:
memcpy(&fib_work->fnh_info, ptr, sizeof(fib_work->fnh_info));
fib_info_hold(fib_work->fnh_info.fib_nh->nh_parent);
break;
}
mlxsw_core_schedule_work(&fib_work->work);
return NOTIFY_DONE;
}
static struct mlxsw_sp_rif *
mlxsw_sp_rif_find_by_dev(const struct mlxsw_sp *mlxsw_sp,
const struct net_device *dev)
{
int i;
for (i = 0; i < MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_RIFS); i++)
if (mlxsw_sp->router->rifs[i] &&
mlxsw_sp->router->rifs[i]->dev == dev)
return mlxsw_sp->router->rifs[i];
return NULL;
}
static int mlxsw_sp_router_rif_disable(struct mlxsw_sp *mlxsw_sp, u16 rif)
{
char ritr_pl[MLXSW_REG_RITR_LEN];
int err;
mlxsw_reg_ritr_rif_pack(ritr_pl, rif);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
if (WARN_ON_ONCE(err))
return err;
mlxsw_reg_ritr_enable_set(ritr_pl, false);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
}
static void mlxsw_sp_router_rif_gone_sync(struct mlxsw_sp *mlxsw_sp,
struct mlxsw_sp_rif *rif)
{
mlxsw_sp_router_rif_disable(mlxsw_sp, rif->rif_index);
mlxsw_sp_nexthop_rif_gone_sync(mlxsw_sp, rif);
mlxsw_sp_neigh_rif_gone_sync(mlxsw_sp, rif);
}
static bool mlxsw_sp_rif_should_config(struct mlxsw_sp_rif *rif,
const struct in_device *in_dev,
unsigned long event)
{
switch (event) {
case NETDEV_UP:
if (!rif)
return true;
return false;
case NETDEV_DOWN:
if (rif && !in_dev->ifa_list &&
!netif_is_l3_slave(rif->dev))
return true;
/* It is possible we already removed the RIF ourselves
* if it was assigned to a netdev that is now a bridge
* or LAG slave.
*/
return false;
}
return false;
}
static enum mlxsw_sp_rif_type
mlxsw_sp_dev_rif_type(const struct mlxsw_sp *mlxsw_sp,
const struct net_device *dev)
{
enum mlxsw_sp_fid_type type;
/* RIF type is derived from the type of the underlying FID */
if (is_vlan_dev(dev) && netif_is_bridge_master(vlan_dev_real_dev(dev)))
type = MLXSW_SP_FID_TYPE_8021Q;
else if (netif_is_bridge_master(dev) && br_vlan_enabled(dev))
type = MLXSW_SP_FID_TYPE_8021Q;
else if (netif_is_bridge_master(dev))
type = MLXSW_SP_FID_TYPE_8021D;
else
type = MLXSW_SP_FID_TYPE_RFID;
return mlxsw_sp_fid_type_rif_type(mlxsw_sp, type);
}
static int mlxsw_sp_rif_index_alloc(struct mlxsw_sp *mlxsw_sp, u16 *p_rif_index)
{
int i;
for (i = 0; i < MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_RIFS); i++) {
if (!mlxsw_sp->router->rifs[i]) {
*p_rif_index = i;
return 0;
}
}
return -ENOBUFS;
}
static struct mlxsw_sp_rif *mlxsw_sp_rif_alloc(size_t rif_size, u16 rif_index,
u16 vr_id,
struct net_device *l3_dev)
{
struct mlxsw_sp_rif *rif;
rif = kzalloc(rif_size, GFP_KERNEL);
if (!rif)
return NULL;
INIT_LIST_HEAD(&rif->nexthop_list);
INIT_LIST_HEAD(&rif->neigh_list);
ether_addr_copy(rif->addr, l3_dev->dev_addr);
rif->mtu = l3_dev->mtu;
rif->vr_id = vr_id;
rif->dev = l3_dev;
rif->rif_index = rif_index;
return rif;
}
struct mlxsw_sp_rif *mlxsw_sp_rif_by_index(const struct mlxsw_sp *mlxsw_sp,
u16 rif_index)
{
return mlxsw_sp->router->rifs[rif_index];
}
u16 mlxsw_sp_rif_index(const struct mlxsw_sp_rif *rif)
{
return rif->rif_index;
}
int mlxsw_sp_rif_dev_ifindex(const struct mlxsw_sp_rif *rif)
{
return rif->dev->ifindex;
}
static struct mlxsw_sp_rif *
mlxsw_sp_rif_create(struct mlxsw_sp *mlxsw_sp,
const struct mlxsw_sp_rif_params *params)
{
u32 tb_id = l3mdev_fib_table(params->dev);
const struct mlxsw_sp_rif_ops *ops;
enum mlxsw_sp_rif_type type;
struct mlxsw_sp_rif *rif;
struct mlxsw_sp_fid *fid;
struct mlxsw_sp_vr *vr;
u16 rif_index;
int err;
type = mlxsw_sp_dev_rif_type(mlxsw_sp, params->dev);
ops = mlxsw_sp->router->rif_ops_arr[type];
vr = mlxsw_sp_vr_get(mlxsw_sp, tb_id ? : RT_TABLE_MAIN);
if (IS_ERR(vr))
return ERR_CAST(vr);
err = mlxsw_sp_rif_index_alloc(mlxsw_sp, &rif_index);
if (err)
goto err_rif_index_alloc;
rif = mlxsw_sp_rif_alloc(ops->rif_size, rif_index, vr->id, params->dev);
if (!rif) {
err = -ENOMEM;
goto err_rif_alloc;
}
rif->mlxsw_sp = mlxsw_sp;
rif->ops = ops;
fid = ops->fid_get(rif);
if (IS_ERR(fid)) {
err = PTR_ERR(fid);
goto err_fid_get;
}
rif->fid = fid;
if (ops->setup)
ops->setup(rif, params);
err = ops->configure(rif);
if (err)
goto err_configure;
err = mlxsw_sp_rif_fdb_op(mlxsw_sp, params->dev->dev_addr,
mlxsw_sp_fid_index(fid), true);
if (err)
goto err_rif_fdb_op;
mlxsw_sp_rif_counters_alloc(rif);
mlxsw_sp_fid_rif_set(fid, rif);
mlxsw_sp->router->rifs[rif_index] = rif;
vr->rif_count++;
return rif;
err_rif_fdb_op:
ops->deconfigure(rif);
err_configure:
mlxsw_sp_fid_put(fid);
err_fid_get:
kfree(rif);
err_rif_alloc:
err_rif_index_alloc:
mlxsw_sp_vr_put(vr);
return ERR_PTR(err);
}
void mlxsw_sp_rif_destroy(struct mlxsw_sp_rif *rif)
{
const struct mlxsw_sp_rif_ops *ops = rif->ops;
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
struct mlxsw_sp_fid *fid = rif->fid;
struct mlxsw_sp_vr *vr;
mlxsw_sp_router_rif_gone_sync(mlxsw_sp, rif);
vr = &mlxsw_sp->router->vrs[rif->vr_id];
vr->rif_count--;
mlxsw_sp->router->rifs[rif->rif_index] = NULL;
mlxsw_sp_fid_rif_set(fid, NULL);
mlxsw_sp_rif_counters_free(rif);
mlxsw_sp_rif_fdb_op(mlxsw_sp, rif->dev->dev_addr,
mlxsw_sp_fid_index(fid), false);
ops->deconfigure(rif);
mlxsw_sp_fid_put(fid);
kfree(rif);
mlxsw_sp_vr_put(vr);
}
static void
mlxsw_sp_rif_subport_params_init(struct mlxsw_sp_rif_params *params,
struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan)
{
struct mlxsw_sp_port *mlxsw_sp_port = mlxsw_sp_port_vlan->mlxsw_sp_port;
params->vid = mlxsw_sp_port_vlan->vid;
params->lag = mlxsw_sp_port->lagged;
if (params->lag)
params->lag_id = mlxsw_sp_port->lag_id;
else
params->system_port = mlxsw_sp_port->local_port;
}
static int
mlxsw_sp_port_vlan_router_join(struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan,
struct net_device *l3_dev)
{
struct mlxsw_sp_port *mlxsw_sp_port = mlxsw_sp_port_vlan->mlxsw_sp_port;
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
u16 vid = mlxsw_sp_port_vlan->vid;
struct mlxsw_sp_rif *rif;
struct mlxsw_sp_fid *fid;
int err;
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, l3_dev);
if (!rif) {
struct mlxsw_sp_rif_params params = {
.dev = l3_dev,
};
mlxsw_sp_rif_subport_params_init(&params, mlxsw_sp_port_vlan);
rif = mlxsw_sp_rif_create(mlxsw_sp, &params);
if (IS_ERR(rif))
return PTR_ERR(rif);
}
/* FID was already created, just take a reference */
fid = rif->ops->fid_get(rif);
err = mlxsw_sp_fid_port_vid_map(fid, mlxsw_sp_port, vid);
if (err)
goto err_fid_port_vid_map;
err = mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, vid, false);
if (err)
goto err_port_vid_learning_set;
err = mlxsw_sp_port_vid_stp_set(mlxsw_sp_port, vid,
BR_STATE_FORWARDING);
if (err)
goto err_port_vid_stp_set;
mlxsw_sp_port_vlan->fid = fid;
return 0;
err_port_vid_stp_set:
mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, vid, true);
err_port_vid_learning_set:
mlxsw_sp_fid_port_vid_unmap(fid, mlxsw_sp_port, vid);
err_fid_port_vid_map:
mlxsw_sp_fid_put(fid);
return err;
}
void
mlxsw_sp_port_vlan_router_leave(struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan)
{
struct mlxsw_sp_port *mlxsw_sp_port = mlxsw_sp_port_vlan->mlxsw_sp_port;
struct mlxsw_sp_fid *fid = mlxsw_sp_port_vlan->fid;
u16 vid = mlxsw_sp_port_vlan->vid;
if (WARN_ON(mlxsw_sp_fid_type(fid) != MLXSW_SP_FID_TYPE_RFID))
return;
mlxsw_sp_port_vlan->fid = NULL;
mlxsw_sp_port_vid_stp_set(mlxsw_sp_port, vid, BR_STATE_BLOCKING);
mlxsw_sp_port_vid_learning_set(mlxsw_sp_port, vid, true);
mlxsw_sp_fid_port_vid_unmap(fid, mlxsw_sp_port, vid);
/* If router port holds the last reference on the rFID, then the
* associated Sub-port RIF will be destroyed.
*/
mlxsw_sp_fid_put(fid);
}
static int mlxsw_sp_inetaddr_port_vlan_event(struct net_device *l3_dev,
struct net_device *port_dev,
unsigned long event, u16 vid)
{
struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(port_dev);
struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan;
mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_find_by_vid(mlxsw_sp_port, vid);
if (WARN_ON(!mlxsw_sp_port_vlan))
return -EINVAL;
switch (event) {
case NETDEV_UP:
return mlxsw_sp_port_vlan_router_join(mlxsw_sp_port_vlan,
l3_dev);
case NETDEV_DOWN:
mlxsw_sp_port_vlan_router_leave(mlxsw_sp_port_vlan);
break;
}
return 0;
}
static int mlxsw_sp_inetaddr_port_event(struct net_device *port_dev,
unsigned long event)
{
if (netif_is_bridge_port(port_dev) ||
netif_is_lag_port(port_dev) ||
netif_is_ovs_port(port_dev))
return 0;
return mlxsw_sp_inetaddr_port_vlan_event(port_dev, port_dev, event, 1);
}
static int __mlxsw_sp_inetaddr_lag_event(struct net_device *l3_dev,
struct net_device *lag_dev,
unsigned long event, u16 vid)
{
struct net_device *port_dev;
struct list_head *iter;
int err;
netdev_for_each_lower_dev(lag_dev, port_dev, iter) {
if (mlxsw_sp_port_dev_check(port_dev)) {
err = mlxsw_sp_inetaddr_port_vlan_event(l3_dev,
port_dev,
event, vid);
if (err)
return err;
}
}
return 0;
}
static int mlxsw_sp_inetaddr_lag_event(struct net_device *lag_dev,
unsigned long event)
{
if (netif_is_bridge_port(lag_dev))
return 0;
return __mlxsw_sp_inetaddr_lag_event(lag_dev, lag_dev, event, 1);
}
static int mlxsw_sp_inetaddr_bridge_event(struct net_device *l3_dev,
unsigned long event)
{
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(l3_dev);
struct mlxsw_sp_rif_params params = {
.dev = l3_dev,
};
struct mlxsw_sp_rif *rif;
switch (event) {
case NETDEV_UP:
rif = mlxsw_sp_rif_create(mlxsw_sp, &params);
if (IS_ERR(rif))
return PTR_ERR(rif);
break;
case NETDEV_DOWN:
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, l3_dev);
mlxsw_sp_rif_destroy(rif);
break;
}
return 0;
}
static int mlxsw_sp_inetaddr_vlan_event(struct net_device *vlan_dev,
unsigned long event)
{
struct net_device *real_dev = vlan_dev_real_dev(vlan_dev);
u16 vid = vlan_dev_vlan_id(vlan_dev);
if (netif_is_bridge_port(vlan_dev))
return 0;
if (mlxsw_sp_port_dev_check(real_dev))
return mlxsw_sp_inetaddr_port_vlan_event(vlan_dev, real_dev,
event, vid);
else if (netif_is_lag_master(real_dev))
return __mlxsw_sp_inetaddr_lag_event(vlan_dev, real_dev, event,
vid);
else if (netif_is_bridge_master(real_dev) && br_vlan_enabled(real_dev))
return mlxsw_sp_inetaddr_bridge_event(vlan_dev, event);
return 0;
}
static int __mlxsw_sp_inetaddr_event(struct net_device *dev,
unsigned long event)
{
if (mlxsw_sp_port_dev_check(dev))
return mlxsw_sp_inetaddr_port_event(dev, event);
else if (netif_is_lag_master(dev))
return mlxsw_sp_inetaddr_lag_event(dev, event);
else if (netif_is_bridge_master(dev))
return mlxsw_sp_inetaddr_bridge_event(dev, event);
else if (is_vlan_dev(dev))
return mlxsw_sp_inetaddr_vlan_event(dev, event);
else
return 0;
}
int mlxsw_sp_inetaddr_event(struct notifier_block *unused,
unsigned long event, void *ptr)
{
struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
struct net_device *dev = ifa->ifa_dev->dev;
struct mlxsw_sp *mlxsw_sp;
struct mlxsw_sp_rif *rif;
int err = 0;
mlxsw_sp = mlxsw_sp_lower_get(dev);
if (!mlxsw_sp)
goto out;
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, dev);
if (!mlxsw_sp_rif_should_config(rif, ifa->ifa_dev, event))
goto out;
err = __mlxsw_sp_inetaddr_event(dev, event);
out:
return notifier_from_errno(err);
}
static int mlxsw_sp_rif_edit(struct mlxsw_sp *mlxsw_sp, u16 rif_index,
const char *mac, int mtu)
{
char ritr_pl[MLXSW_REG_RITR_LEN];
int err;
mlxsw_reg_ritr_rif_pack(ritr_pl, rif_index);
err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
if (err)
return err;
mlxsw_reg_ritr_mtu_set(ritr_pl, mtu);
mlxsw_reg_ritr_if_mac_memcpy_to(ritr_pl, mac);
mlxsw_reg_ritr_op_set(ritr_pl, MLXSW_REG_RITR_RIF_CREATE);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
}
int mlxsw_sp_netdevice_router_port_event(struct net_device *dev)
{
struct mlxsw_sp *mlxsw_sp;
struct mlxsw_sp_rif *rif;
u16 fid_index;
int err;
mlxsw_sp = mlxsw_sp_lower_get(dev);
if (!mlxsw_sp)
return 0;
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, dev);
if (!rif)
return 0;
fid_index = mlxsw_sp_fid_index(rif->fid);
err = mlxsw_sp_rif_fdb_op(mlxsw_sp, rif->addr, fid_index, false);
if (err)
return err;
err = mlxsw_sp_rif_edit(mlxsw_sp, rif->rif_index, dev->dev_addr,
dev->mtu);
if (err)
goto err_rif_edit;
err = mlxsw_sp_rif_fdb_op(mlxsw_sp, dev->dev_addr, fid_index, true);
if (err)
goto err_rif_fdb_op;
ether_addr_copy(rif->addr, dev->dev_addr);
rif->mtu = dev->mtu;
netdev_dbg(dev, "Updated RIF=%d\n", rif->rif_index);
return 0;
err_rif_fdb_op:
mlxsw_sp_rif_edit(mlxsw_sp, rif->rif_index, rif->addr, rif->mtu);
err_rif_edit:
mlxsw_sp_rif_fdb_op(mlxsw_sp, rif->addr, fid_index, true);
return err;
}
static int mlxsw_sp_port_vrf_join(struct mlxsw_sp *mlxsw_sp,
struct net_device *l3_dev)
{
struct mlxsw_sp_rif *rif;
/* If netdev is already associated with a RIF, then we need to
* destroy it and create a new one with the new virtual router ID.
*/
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, l3_dev);
if (rif)
__mlxsw_sp_inetaddr_event(l3_dev, NETDEV_DOWN);
return __mlxsw_sp_inetaddr_event(l3_dev, NETDEV_UP);
}
static void mlxsw_sp_port_vrf_leave(struct mlxsw_sp *mlxsw_sp,
struct net_device *l3_dev)
{
struct mlxsw_sp_rif *rif;
rif = mlxsw_sp_rif_find_by_dev(mlxsw_sp, l3_dev);
if (!rif)
return;
__mlxsw_sp_inetaddr_event(l3_dev, NETDEV_DOWN);
}
int mlxsw_sp_netdevice_vrf_event(struct net_device *l3_dev, unsigned long event,
struct netdev_notifier_changeupper_info *info)
{
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_lower_get(l3_dev);
int err = 0;
if (!mlxsw_sp)
return 0;
switch (event) {
case NETDEV_PRECHANGEUPPER:
return 0;
case NETDEV_CHANGEUPPER:
if (info->linking)
err = mlxsw_sp_port_vrf_join(mlxsw_sp, l3_dev);
else
mlxsw_sp_port_vrf_leave(mlxsw_sp, l3_dev);
break;
}
return err;
}
static struct mlxsw_sp_rif_subport *
mlxsw_sp_rif_subport_rif(const struct mlxsw_sp_rif *rif)
{
return container_of(rif, struct mlxsw_sp_rif_subport, common);
}
static void mlxsw_sp_rif_subport_setup(struct mlxsw_sp_rif *rif,
const struct mlxsw_sp_rif_params *params)
{
struct mlxsw_sp_rif_subport *rif_subport;
rif_subport = mlxsw_sp_rif_subport_rif(rif);
rif_subport->vid = params->vid;
rif_subport->lag = params->lag;
if (params->lag)
rif_subport->lag_id = params->lag_id;
else
rif_subport->system_port = params->system_port;
}
static int mlxsw_sp_rif_subport_op(struct mlxsw_sp_rif *rif, bool enable)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
struct mlxsw_sp_rif_subport *rif_subport;
char ritr_pl[MLXSW_REG_RITR_LEN];
rif_subport = mlxsw_sp_rif_subport_rif(rif);
mlxsw_reg_ritr_pack(ritr_pl, enable, MLXSW_REG_RITR_SP_IF,
rif->rif_index, rif->vr_id, rif->dev->mtu,
rif->dev->dev_addr);
mlxsw_reg_ritr_sp_if_pack(ritr_pl, rif_subport->lag,
rif_subport->lag ? rif_subport->lag_id :
rif_subport->system_port,
rif_subport->vid);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
}
static int mlxsw_sp_rif_subport_configure(struct mlxsw_sp_rif *rif)
{
return mlxsw_sp_rif_subport_op(rif, true);
}
static void mlxsw_sp_rif_subport_deconfigure(struct mlxsw_sp_rif *rif)
{
mlxsw_sp_rif_subport_op(rif, false);
}
static struct mlxsw_sp_fid *
mlxsw_sp_rif_subport_fid_get(struct mlxsw_sp_rif *rif)
{
return mlxsw_sp_fid_rfid_get(rif->mlxsw_sp, rif->rif_index);
}
static const struct mlxsw_sp_rif_ops mlxsw_sp_rif_subport_ops = {
.type = MLXSW_SP_RIF_TYPE_SUBPORT,
.rif_size = sizeof(struct mlxsw_sp_rif_subport),
.setup = mlxsw_sp_rif_subport_setup,
.configure = mlxsw_sp_rif_subport_configure,
.deconfigure = mlxsw_sp_rif_subport_deconfigure,
.fid_get = mlxsw_sp_rif_subport_fid_get,
};
static int mlxsw_sp_rif_vlan_fid_op(struct mlxsw_sp_rif *rif,
enum mlxsw_reg_ritr_if_type type,
u16 vid_fid, bool enable)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
char ritr_pl[MLXSW_REG_RITR_LEN];
mlxsw_reg_ritr_pack(ritr_pl, enable, type, rif->rif_index, rif->vr_id,
rif->dev->mtu, rif->dev->dev_addr);
mlxsw_reg_ritr_fid_set(ritr_pl, type, vid_fid);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ritr), ritr_pl);
}
static u8 mlxsw_sp_router_port(const struct mlxsw_sp *mlxsw_sp)
{
return mlxsw_core_max_ports(mlxsw_sp->core) + 1;
}
static int mlxsw_sp_rif_vlan_configure(struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
u16 vid = mlxsw_sp_fid_8021q_vid(rif->fid);
int err;
err = mlxsw_sp_rif_vlan_fid_op(rif, MLXSW_REG_RITR_VLAN_IF, vid, true);
if (err)
return err;
err = mlxsw_sp_fid_flood_set(rif->fid, MLXSW_SP_FLOOD_TYPE_BC,
mlxsw_sp_router_port(mlxsw_sp), true);
if (err)
goto err_fid_bc_flood_set;
return 0;
err_fid_bc_flood_set:
mlxsw_sp_rif_vlan_fid_op(rif, MLXSW_REG_RITR_VLAN_IF, vid, false);
return err;
}
static void mlxsw_sp_rif_vlan_deconfigure(struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
u16 vid = mlxsw_sp_fid_8021q_vid(rif->fid);
mlxsw_sp_fid_flood_set(rif->fid, MLXSW_SP_FLOOD_TYPE_BC,
mlxsw_sp_router_port(mlxsw_sp), false);
mlxsw_sp_rif_vlan_fid_op(rif, MLXSW_REG_RITR_VLAN_IF, vid, false);
}
static struct mlxsw_sp_fid *
mlxsw_sp_rif_vlan_fid_get(struct mlxsw_sp_rif *rif)
{
u16 vid = is_vlan_dev(rif->dev) ? vlan_dev_vlan_id(rif->dev) : 1;
return mlxsw_sp_fid_8021q_get(rif->mlxsw_sp, vid);
}
static const struct mlxsw_sp_rif_ops mlxsw_sp_rif_vlan_ops = {
.type = MLXSW_SP_RIF_TYPE_VLAN,
.rif_size = sizeof(struct mlxsw_sp_rif),
.configure = mlxsw_sp_rif_vlan_configure,
.deconfigure = mlxsw_sp_rif_vlan_deconfigure,
.fid_get = mlxsw_sp_rif_vlan_fid_get,
};
static int mlxsw_sp_rif_fid_configure(struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
u16 fid_index = mlxsw_sp_fid_index(rif->fid);
int err;
err = mlxsw_sp_rif_vlan_fid_op(rif, MLXSW_REG_RITR_FID_IF, fid_index,
true);
if (err)
return err;
err = mlxsw_sp_fid_flood_set(rif->fid, MLXSW_SP_FLOOD_TYPE_BC,
mlxsw_sp_router_port(mlxsw_sp), true);
if (err)
goto err_fid_bc_flood_set;
return 0;
err_fid_bc_flood_set:
mlxsw_sp_rif_vlan_fid_op(rif, MLXSW_REG_RITR_FID_IF, fid_index, false);
return err;
}
static void mlxsw_sp_rif_fid_deconfigure(struct mlxsw_sp_rif *rif)
{
struct mlxsw_sp *mlxsw_sp = rif->mlxsw_sp;
u16 fid_index = mlxsw_sp_fid_index(rif->fid);
mlxsw_sp_fid_flood_set(rif->fid, MLXSW_SP_FLOOD_TYPE_BC,
mlxsw_sp_router_port(mlxsw_sp), false);
mlxsw_sp_rif_vlan_fid_op(rif, MLXSW_REG_RITR_FID_IF, fid_index, false);
}
static struct mlxsw_sp_fid *
mlxsw_sp_rif_fid_fid_get(struct mlxsw_sp_rif *rif)
{
return mlxsw_sp_fid_8021d_get(rif->mlxsw_sp, rif->dev->ifindex);
}
static const struct mlxsw_sp_rif_ops mlxsw_sp_rif_fid_ops = {
.type = MLXSW_SP_RIF_TYPE_FID,
.rif_size = sizeof(struct mlxsw_sp_rif),
.configure = mlxsw_sp_rif_fid_configure,
.deconfigure = mlxsw_sp_rif_fid_deconfigure,
.fid_get = mlxsw_sp_rif_fid_fid_get,
};
static const struct mlxsw_sp_rif_ops *mlxsw_sp_rif_ops_arr[] = {
[MLXSW_SP_RIF_TYPE_SUBPORT] = &mlxsw_sp_rif_subport_ops,
[MLXSW_SP_RIF_TYPE_VLAN] = &mlxsw_sp_rif_vlan_ops,
[MLXSW_SP_RIF_TYPE_FID] = &mlxsw_sp_rif_fid_ops,
};
static int mlxsw_sp_rifs_init(struct mlxsw_sp *mlxsw_sp)
{
u64 max_rifs = MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_RIFS);
mlxsw_sp->router->rifs = kcalloc(max_rifs,
sizeof(struct mlxsw_sp_rif *),
GFP_KERNEL);
if (!mlxsw_sp->router->rifs)
return -ENOMEM;
mlxsw_sp->router->rif_ops_arr = mlxsw_sp_rif_ops_arr;
return 0;
}
static void mlxsw_sp_rifs_fini(struct mlxsw_sp *mlxsw_sp)
{
int i;
for (i = 0; i < MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_RIFS); i++)
WARN_ON_ONCE(mlxsw_sp->router->rifs[i]);
kfree(mlxsw_sp->router->rifs);
}
static void mlxsw_sp_router_fib_dump_flush(struct notifier_block *nb)
{
struct mlxsw_sp_router *router;
/* Flush pending FIB notifications and then flush the device's
* table before requesting another dump. The FIB notification
* block is unregistered, so no need to take RTNL.
*/
mlxsw_core_flush_owq();
router = container_of(nb, struct mlxsw_sp_router, fib_nb);
mlxsw_sp_router_fib_flush(router->mlxsw_sp);
}
static int __mlxsw_sp_router_init(struct mlxsw_sp *mlxsw_sp)
{
char rgcr_pl[MLXSW_REG_RGCR_LEN];
u64 max_rifs;
int err;
if (!MLXSW_CORE_RES_VALID(mlxsw_sp->core, MAX_RIFS))
return -EIO;
max_rifs = MLXSW_CORE_RES_GET(mlxsw_sp->core, MAX_RIFS);
mlxsw_reg_rgcr_pack(rgcr_pl, true);
mlxsw_reg_rgcr_max_router_interfaces_set(rgcr_pl, max_rifs);
err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rgcr), rgcr_pl);
if (err)
return err;
return 0;
}
static void __mlxsw_sp_router_fini(struct mlxsw_sp *mlxsw_sp)
{
char rgcr_pl[MLXSW_REG_RGCR_LEN];
mlxsw_reg_rgcr_pack(rgcr_pl, false);
mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(rgcr), rgcr_pl);
}
int mlxsw_sp_router_init(struct mlxsw_sp *mlxsw_sp)
{
struct mlxsw_sp_router *router;
int err;
router = kzalloc(sizeof(*mlxsw_sp->router), GFP_KERNEL);
if (!router)
return -ENOMEM;
mlxsw_sp->router = router;
router->mlxsw_sp = mlxsw_sp;
INIT_LIST_HEAD(&mlxsw_sp->router->nexthop_neighs_list);
err = __mlxsw_sp_router_init(mlxsw_sp);
if (err)
goto err_router_init;
err = mlxsw_sp_rifs_init(mlxsw_sp);
if (err)
goto err_rifs_init;
err = rhashtable_init(&mlxsw_sp->router->nexthop_ht,
&mlxsw_sp_nexthop_ht_params);
if (err)
goto err_nexthop_ht_init;
err = rhashtable_init(&mlxsw_sp->router->nexthop_group_ht,
&mlxsw_sp_nexthop_group_ht_params);
if (err)
goto err_nexthop_group_ht_init;
err = mlxsw_sp_lpm_init(mlxsw_sp);
if (err)
goto err_lpm_init;
err = mlxsw_sp_vrs_init(mlxsw_sp);
if (err)
goto err_vrs_init;
err = mlxsw_sp_neigh_init(mlxsw_sp);
if (err)
goto err_neigh_init;
mlxsw_sp->router->fib_nb.notifier_call = mlxsw_sp_router_fib_event;
err = register_fib_notifier(&mlxsw_sp->router->fib_nb,
mlxsw_sp_router_fib_dump_flush);
if (err)
goto err_register_fib_notifier;
return 0;
err_register_fib_notifier:
mlxsw_sp_neigh_fini(mlxsw_sp);
err_neigh_init:
mlxsw_sp_vrs_fini(mlxsw_sp);
err_vrs_init:
mlxsw_sp_lpm_fini(mlxsw_sp);
err_lpm_init:
rhashtable_destroy(&mlxsw_sp->router->nexthop_group_ht);
err_nexthop_group_ht_init:
rhashtable_destroy(&mlxsw_sp->router->nexthop_ht);
err_nexthop_ht_init:
mlxsw_sp_rifs_fini(mlxsw_sp);
err_rifs_init:
__mlxsw_sp_router_fini(mlxsw_sp);
err_router_init:
kfree(mlxsw_sp->router);
return err;
}
void mlxsw_sp_router_fini(struct mlxsw_sp *mlxsw_sp)
{
unregister_fib_notifier(&mlxsw_sp->router->fib_nb);
mlxsw_sp_neigh_fini(mlxsw_sp);
mlxsw_sp_vrs_fini(mlxsw_sp);
mlxsw_sp_lpm_fini(mlxsw_sp);
rhashtable_destroy(&mlxsw_sp->router->nexthop_group_ht);
rhashtable_destroy(&mlxsw_sp->router->nexthop_ht);
mlxsw_sp_rifs_fini(mlxsw_sp);
__mlxsw_sp_router_fini(mlxsw_sp);
kfree(mlxsw_sp->router);
}