redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/net/tipc/node.h

189 lines
6.5 KiB
C
Raw Normal View History

[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
/*
* net/tipc/node.h: Include file for TIPC node management routines
[NET] TIPC: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:25:21 -07:00
*
tipc: eliminate race condition at multicast reception In a previous commit in this series we resolved a race problem during unicast message reception. Here, we resolve the same problem at multicast reception. We apply the same technique: an input queue serializing the delivery of arriving buffers. The main difference is that here we do it in two steps. First, the broadcast link feeds arriving buffers into the tail of an arrival queue, which head is consumed at the socket level, and where destination lookup is performed. Second, if the lookup is successful, the resulting buffer clones are fed into a second queue, the input queue. This queue is consumed at reception in the socket just like in the unicast case. Both queues are protected by the same lock, -the one of the input queue. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 06:36:44 -07:00
* Copyright (c) 2000-2006, 2014-2015, Ericsson AB
tipc: rename node create lock to protect node list and hlist When a node is created, tipc_net_lock read lock is first held and then node_create_lock is grabbed in order to prevent the same node from being created and inserted into both node list and hlist twice. But when we query node from the two node lists, we only hold tipc_net_lock read lock without grabbing node_create_lock. Obviously this locking policy is unable to guarantee that the two node lists are always synchronized especially when the operation of changing and accessing them occurs in different contexts like currently doing. Therefore, rename node_create_lock to node_list_lock to protect the two node lists, that is, whenever node is inserted into them or node is queried from them, the node_list_lock should be always held. As a result, tipc_net_lock read lock becomes redundant and then can be removed from the node query functions. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26 22:54:36 -06:00
* Copyright (c) 2005, 2010-2014, Wind River Systems
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
* All rights reserved.
*
[TIPC] License header update The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-11 05:30:43 -07:00
* Redistribution and use in source and binary forms, with or without
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
* modification, are permitted provided that the following conditions are met:
*
[TIPC] License header update The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-11 05:30:43 -07:00
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
*
[TIPC] License header update The license header in each file now more clearly state that this code is licensed under a dual BSD/GPL. Before this was only evident if you looked at the MODULE_LICENSE line in core.c. Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-11 05:30:43 -07:00
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _TIPC_NODE_H
#define _TIPC_NODE_H
tipc: Remove prototype code for supporting multiple clusters Eliminates routines, data structures, and files that were intended to allow TIPC to support a network containing multiple clusters. Currently, TIPC supports only networks consisting of a single cluster within a single zone, so this code is unnecessary. Signed-off-by: Allan Stephens <Allan.Stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31 11:59:19 -07:00
#include "addr.h"
#include "net.h"
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
#include "bearer.h"
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25 19:41:33 -06:00
#include "msg.h"
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 00:27:05 -07:00
/* Out-of-range value for node signature */
#define INVALID_NODE_SIG 0x10000
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
#define INVALID_BEARER_ID -1
tipc: rename enum names of node flags Rename node flags to action_flags as well as its enum names so that they can reflect its real meanings. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07 18:54:39 -06:00
/* Flags used to take different actions according to flag type
* TIPC_NOTIFY_NODE_DOWN: notify node is down
* TIPC_NOTIFY_NODE_UP: notify node is up
tipc: fix a potential deadlock Locking dependency detected below possible unsafe locking scenario: CPU0 CPU1 T0: tipc_named_rcv() tipc_rcv() T1: [grab nametble write lock]* [grab node lock]* T2: tipc_update_nametbl() tipc_node_link_up() T3: tipc_nodesub_subscribe() tipc_nametbl_publish() T4: [grab node lock]* [grab nametble write lock]* The opposite order of holding nametbl write lock and node lock on above two different paths may result in a deadlock. If we move the the updating of the name table after link state named out of node lock, the reverse order of holding locks will be eliminated, and as a result, the deadlock risk. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20 00:44:25 -06:00
* TIPC_DISTRIBUTE_NAME: publish or withdraw link state name type
tipc: rename setup_blocked variable of node struct to flags Rename setup_blocked variable of node struct to a more common name called "flags", which will be used to represent kinds of node states. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-04 18:56:11 -06:00
*/
enum {
tipc: rename enum names of node flags Rename node flags to action_flags as well as its enum names so that they can reflect its real meanings. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07 18:54:39 -06:00
TIPC_NOTIFY_NODE_DOWN = (1 << 3),
tipc: use pseudo message to wake up sockets after link congestion The current link implementation keeps a linked list of blocked ports/ sockets that is populated when there is link congestion. The purpose of this is to let the link know which users to wake up when the congestion abates. This adds unnecessary complexity to the data structure and the code, since it forces us to involve the link each time we want to delete a socket. It also forces us to grab the spinlock port_lock within the scope of node_lock. We want to get rid of this direct dependence, as well as the deadlock hazard resulting from the usage of port_lock. In this commit, we instead let the link keep list of a "wakeup" pseudo messages for use in such situations. Those messages are sent to the pending sockets via the ordinary message reception path, and wake up the socket's owner when they are received. This enables us to get rid of the 'waiting_ports' linked lists in struct tipc_port that manifest this direct reference. As a consequence, we can eliminate another BH entry into the socket, and hence the need to grab port_lock. This is a further step in our effort to remove port_lock altogether. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 16:09:07 -06:00
TIPC_NOTIFY_NODE_UP = (1 << 4),
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 06:36:41 -07:00
TIPC_NOTIFY_LINK_UP = (1 << 6),
tipc: clean up unused code and structures After the previous changes in this series, we can now remove some unused code and structures, both in the broadcast, link aggregation and link code. There are no functional changes in this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 06:51:48 -06:00
TIPC_NOTIFY_LINK_DOWN = (1 << 7)
tipc: rename setup_blocked variable of node struct to flags Rename setup_blocked variable of node struct to a more common name called "flags", which will be used to represent kinds of node states. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-04 18:56:11 -06:00
};
tipc: Ensure both nodes recognize loss of contact between them Enhances TIPC to ensure that a node that loses contact with a neighboring node does not allow contact to be re-established until it sees that its peer has also recognized the loss of contact. Previously, nodes that were connected by two or more links could encounter a situation in which node A would lose contact with node B on all of its links, purge its name table of names published by B, and then fail to repopulate those names once contact with B was restored. This would happen because B was able to re-establish one or more links so quickly that it never reached a point where it had no links to A -- meaning that B never saw a loss of contact with A, and consequently didn't re-publish its names to A. This problem is now prevented by enhancing the cleanup done by TIPC following a loss of contact with a neighboring node to ensure that node A ignores all messages sent by B until it receives a LINK_PROTOCOL message that indicates B has lost contact with A, thereby preventing the (re)establishment of links between the nodes. The loss of contact is recognized when a RESET or ACTIVATE message is received that has a "redundant link exists" field of 0, indicating that B's sending link endpoint is in a reset state and that B has no other working links. Additionally, TIPC now suppresses the sending of (most) link protocol messages to a neighboring node while it is cleaning up after an earlier loss of contact with that node. This stops the peer node from prematurely activating its link endpoint, which would prevent TIPC from later activating its own end. TIPC still allows outgoing RESET messages to occur during cleanup, to avoid problems if its own node recognizes the loss of contact first and tries to notify the peer of the situation. Finally, TIPC now recognizes an impending loss of contact with a peer node as soon as it receives a RESET message on a working link that is the peer's only link to the node, and ensures that the link protocol suppression mentioned above goes into effect right away -- that is, even before its own link endpoints have failed. This is necessary to ensure correct operation when there are redundant links between the nodes, since otherwise TIPC would send an ACTIVATE message upon receiving a RESET on its first link and only begin suppressing when a RESET on its second link was received, instead of initiating suppression with the first RESET message as it needs to. Note: The reworked cleanup code also eliminates a check that prevented a link endpoint's discovery object from responding to incoming messages while stale name table entries are being purged. This check is now unnecessary and would have slowed down re-establishment of communication between the nodes in some situations. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-05-27 09:00:51 -06:00
tipc: introduce capability bit for broadcast synchronization Until now, we have tried to support both the newer, dedicated broadcast synchronization mechanism along with the older, less safe, RESET_MSG/ ACTIVATE_MSG based one. The latter method has turned out to be a hazard in a highly dynamic cluster, so we find it safer to disable it completely when we find that the former mechanism is supported by the peer node. For this purpose, we now introduce a new capabability bit, TIPC_BCAST_SYNCH, to inform any peer nodes that dedicated broadcast syncronization is supported by the present node. The new bit is conveyed between peers in the 'capabilities' field of neighbor discovery messages. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 06:51:40 -06:00
/* Optional capabilities supported by this code version
*/
enum {
TIPC_BCAST_SYNCH = (1 << 1)
};
#define TIPC_NODE_CAPABILITIES TIPC_BCAST_SYNCH
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
struct tipc_link_entry {
struct tipc_link *link;
tipc: introduce per-link spinlock As a preparation to allow parallel links to work more independently from each other we introduce a per-link spinlock, to be stored in the struct nodes's link entry area. Since the node lock still is a regular spinlock there is no increase in parallellism at this stage. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-19 12:30:43 -07:00
spinlock_t lock; /* per-link */
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
u32 mtu;
tipc: move link input queue to tipc_node At present, the link input queue and the name distributor receive queues are fields aggregated in struct tipc_link. This is a hazard, because a link might be deleted while a receiving socket still keeps reference to one of the queues. This commit fixes this bug. However, rather than adding yet another reference counter to the critical data path, we move the two queues to safe ground inside struct tipc_node, which is already protected, and let the link code only handle references to the queues. This is also in line with planned later changes in this area. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:21 -06:00
struct sk_buff_head inputq;
tipc: move link creation from neighbor discoverer to node As a step towards turning links into node internal entities, we move the creation of links from the neighbor discovery logics to the node's link control logics. We also create an additional entry for the link's media address in the newly introduced struct tipc_link_entry, since this is where it is needed in the upcoming commits. The current copy in struct tipc_link is kept for now, but will be removed later. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:20 -06:00
struct tipc_media_addr maddr;
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
};
tipc: let broadcast packet reception use new link receive function The code path for receiving broadcast packets is currently distinct from the unicast path. This leads to unnecessary code and data duplication, something that can be avoided with some effort. We now introduce separate per-peer tipc_link instances for handling broadcast packet reception. Each receive link keeps a pointer to the common, single, broadcast link instance, and can hence handle release and retransmission of send buffers as if they belonged to the own instance. Furthermore, we let each unicast link instance keep a reference to both the pertaining broadcast receive link, and to the common send link. This makes it possible for the unicast links to easily access data for broadcast link synchronization, as well as for carrying acknowledges for received broadcast packets. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 06:51:41 -06:00
struct tipc_bclink_entry {
struct tipc_link *link;
struct sk_buff_head inputq1;
struct sk_buff_head arrvq;
struct sk_buff_head inputq2;
struct sk_buff_head namedq;
};
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
/**
tipc: Don't use structure names which easily globally conflict. Andrew Morton reported a build failure on sparc32, because TIPC uses names like "struct node" and there is a like named data structure defined in linux/node.h This just regexp replaces "struct node*" to "struct tipc_node*" to avoid this and any future similar problems. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-03 00:38:32 -06:00
* struct tipc_node - TIPC node structure
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
* @addr: network address of node
tipc: involve reference counter for node structure TIPC node hash node table is protected with rcu lock on read side. tipc_node_find() is used to look for a node object with node address through iterating the hash node table. As the entire process of what tipc_node_find() traverses the table is guarded with rcu read lock, it's safe for us. However, when callers use the node object returned by tipc_node_find(), there is no rcu read lock applied. Therefore, this is absolutely unsafe for callers of tipc_node_find(). Now we introduce a reference counter for node structure. Before tipc_node_find() returns node object to its caller, it first increases the reference counter. Accordingly, after its caller used it up, it decreases the counter again. This can prevent a node being used by one thread from being freed by another thread. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-26 04:10:24 -06:00
* @ref: reference counter to node object
tipc: introduce per-link spinlock As a preparation to allow parallel links to work more independently from each other we introduce a per-link spinlock, to be stored in the struct nodes's link entry area. Since the node lock still is a regular spinlock there is no increase in parallellism at this stage. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-19 12:30:43 -07:00
* @lock: rwlock governing access to structure
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 00:27:05 -07:00
* @net: the applicable net namespace
tipc: Convert node object array to a hash table Replaces the dynamically allocated array of pointers to the cluster's node objects with a static hash table. Hash collisions are resolved using chaining, with a typical hash chain having only a single node, to avoid degrading performance during processing of incoming packets. The conversion to a hash table reduces the memory requirements for TIPC's node table to approximately the same size it had prior to the previous commit. In addition to the hash table itself, TIPC now also maintains a linked list for the node objects, sorted by ascending network address. This list allows TIPC to continue sending responses to user space applications that request node and link information in sorted order. The list also improves performance when name table update messages are sent by making it easier to identify the nodes that must be notified. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-25 16:42:52 -07:00
* @hash: links to adjacent nodes in unsorted hash chain
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 06:36:41 -07:00
* @inputq: pointer to input queue containing messages for msg event
* @namedq: pointer to name table input queue with name table messages
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
* @active_links: bearer ids of active links, used as index into links[] array
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
* @links: array containing references to all links to node
tipc: rename enum names of node flags Rename node flags to action_flags as well as its enum names so that they can reflect its real meanings. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07 18:54:39 -06:00
* @action_flags: bit mask of different types of node actions
tipc: move link synch and failover to link aggregation level Link failover and synchronization have until now been handled by the links themselves, forcing them to have knowledge about and to access parallel links in order to make the two algorithms work correctly. In this commit, we move the control part of this functionality to the link aggregation level in node.c, which is the right location for this. As a result, the two algorithms become easier to follow, and the link implementation becomes simpler. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30 16:24:19 -06:00
* @state: connectivity state vs peer node
* @sync_point: sequence number where synch/failover is finished
tipc: adjust order of variables in tipc_node structure Move more frequently used variables up to the head of tipc_node structure, hopefully improving a bit performance. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-04 18:56:10 -06:00
* @list: links to adjacent nodes in sorted list of cluster's nodes
* @working_links: number of working links to node (both active and standby)
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
* @link_cnt: number of links to node
tipc: add framework for node capabilities exchange The TIPC protocol spec has defined a 13 bit capability bitmap in the neighbor discovery header, as a means to maintain compatibility between different code and protocol generations. Until now this field has been unused. We now introduce the basic framework for exchanging capabilities between nodes at first contact. After exchange, a peer node's capabilities are stored as a 16 bit bitmap in struct tipc_node. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13 14:08:05 -06:00
* @capabilities: bitmap, indicating peer node's functional capabilities
tipc: Introduce node signature field in neighbor discovery message Adds support for the new "node signature" in neighbor discovery messages, which is a 16 bit identifier chosen randomly when TIPC is initialized. This field makes it possible for nodes receiving a neighbor discovery message to detect if multiple neighboring nodes are using the same network address (i.e. <Z.C.N>), even when the messages are arriving on different interfaces. This first phase of node signature support creates the signature, incorporates it into outgoing neighbor discovery messages, and tracks the signature used by valid neighbors. An upcoming patch builds on this foundation to implement the improved duplicate neighbor detection checking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28 14:26:41 -06:00
* @signature: node instance identifier
tipc: fix a potential deadlock Locking dependency detected below possible unsafe locking scenario: CPU0 CPU1 T0: tipc_named_rcv() tipc_rcv() T1: [grab nametble write lock]* [grab node lock]* T2: tipc_update_nametbl() tipc_node_link_up() T3: tipc_nodesub_subscribe() tipc_nametbl_publish() T4: [grab node lock]* [grab nametble write lock]* The opposite order of holding nametbl write lock and node lock on above two different paths may result in a deadlock. If we move the the updating of the name table after link state named out of node lock, the reverse order of holding locks will be eliminated, and as a result, the deadlock risk. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20 00:44:25 -06:00
* @link_id: local and remote bearer ids of changing link, if any
tipc: remove node subscription infrastructure The node subscribe infrastructure represents a virtual base class, so its users, such as struct tipc_port and struct publication, can derive its implemented functionalities. However, after the removal of struct tipc_port, struct publication is left as its only single user now. So defining an abstract infrastructure for one user becomes no longer reasonable. If corresponding new functions associated with the infrastructure are moved to name_table.c file, the node subscription infrastructure can be removed as well. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25 20:41:45 -07:00
* @publ_list: list of publications
tipc: tipc: convert node list and node hlist to RCU lists Convert tipc_node_list list and node_htable hash list to RCU lists. On read side, the two lists are protected with RCU read lock, and on update side, node_list_lock is applied to them. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26 22:54:37 -06:00
* @rcu: rcu struct for tipc_node
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
*/
tipc: Don't use structure names which easily globally conflict. Andrew Morton reported a build failure on sparc32, because TIPC uses names like "struct node" and there is a like named data structure defined in linux/node.h This just regexp replaces "struct node*" to "struct tipc_node*" to avoid this and any future similar problems. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-03 00:38:32 -06:00
struct tipc_node {
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
u32 addr;
tipc: involve reference counter for node structure TIPC node hash node table is protected with rcu lock on read side. tipc_node_find() is used to look for a node object with node address through iterating the hash node table. As the entire process of what tipc_node_find() traverses the table is guarded with rcu read lock, it's safe for us. However, when callers use the node object returned by tipc_node_find(), there is no rcu read lock applied. Therefore, this is absolutely unsafe for callers of tipc_node_find(). Now we introduce a reference counter for node structure. Before tipc_node_find() returns node object to its caller, it first increases the reference counter. Accordingly, after its caller used it up, it decreases the counter again. This can prevent a node being used by one thread from being freed by another thread. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-26 04:10:24 -06:00
struct kref kref;
tipc: convert node lock to rwlock According to the node FSM a node in state SELF_UP_PEER_UP cannot change state inside a lock context, except when a TUNNEL_PROTOCOL (SYNCH or FAILOVER) packet arrives. However, the node's individual links may still change state. Since each link now is protected by its own spinlock, we finally have the conditions in place to convert the node spinlock to an rwlock_t. If the node state and arriving packet type are rigth, we can let the link directly receive the packet under protection of its own spinlock and the node lock in read mode. In all other cases we use the node lock in write mode. This enables full concurrent execution between parallel links during steady-state traffic situations, i.e., 99+ % of the time. This commit implements this change. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-19 12:30:44 -07:00
rwlock_t lock;
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 00:27:05 -07:00
struct net *net;
tipc: Convert node object array to a hash table Replaces the dynamically allocated array of pointers to the cluster's node objects with a static hash table. Hash collisions are resolved using chaining, with a typical hash chain having only a single node, to avoid degrading performance during processing of incoming packets. The conversion to a hash table reduces the memory requirements for TIPC's node table to approximately the same size it had prior to the previous commit. In addition to the hash table itself, TIPC now also maintains a linked list for the node objects, sorted by ascending network address. This list allows TIPC to continue sending responses to user space applications that request node and link information in sorted order. The list also improves performance when name table update messages are sent by making it easier to identify the nodes that must be notified. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-02-25 16:42:52 -07:00
struct hlist_node hash;
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
int active_links[2];
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
struct tipc_link_entry links[MAX_BEARERS];
tipc: let broadcast packet reception use new link receive function The code path for receiving broadcast packets is currently distinct from the unicast path. This leads to unnecessary code and data duplication, something that can be avoided with some effort. We now introduce separate per-peer tipc_link instances for handling broadcast packet reception. Each receive link keeps a pointer to the common, single, broadcast link instance, and can hence handle release and retransmission of send buffers as if they belonged to the own instance. Furthermore, we let each unicast link instance keep a reference to both the pertaining broadcast receive link, and to the common send link. This makes it possible for the unicast links to easily access data for broadcast link synchronization, as well as for carrying acknowledges for received broadcast packets. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22 06:51:41 -06:00
struct tipc_bclink_entry bc_entry;
tipc: resolve race problem at unicast message reception TIPC handles message cardinality and sequencing at the link layer, before passing messages upwards to the destination sockets. During the upcall from link to socket no locks are held. It is therefore possible, and we see it happen occasionally, that messages arriving in different threads and delivered in sequence still bypass each other before they reach the destination socket. This must not happen, since it violates the sequentiality guarantee. We solve this by adding a new input buffer queue to the link structure. Arriving messages are added safely to the tail of that queue by the link, while the head of the queue is consumed, also safely, by the receiving socket. Sequentiality is secured per socket by only allowing buffers to be dequeued inside the socket lock. Since there may be multiple simultaneous readers of the queue, we use a 'filter' parameter to reduce the risk that they peek the same buffer from the queue, hence also reducing the risk of contention on the receiving socket locks. This solves the sequentiality problem, and seems to cause no measurable performance degradation. A nice side effect of this change is that lock handling in the functions tipc_rcv() and tipc_bcast_rcv() now becomes uniform, something that will enable future simplifications of those functions. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05 06:36:41 -07:00
int action_flags;
tipc: adjust order of variables in tipc_node structure Move more frequently used variables up to the head of tipc_node structure, hopefully improving a bit performance. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-04 18:56:10 -06:00
struct list_head list;
tipc: introduce node contact FSM The logics for determining when a node is permitted to establish and maintain contact with its peer node becomes non-trivial in the presence of multiple parallel links that may come and go independently. A known failure scenario is that one endpoint registers both its links to the peer lost, cleans up it binding table, and prepares for a table update once contact is re-establihed, while the other endpoint may see its links reset and re-established one by one, hence seeing no need to re-synchronize the binding table. To avoid this, a node must not allow re-establishing contact until it has confirmation that even the peer has lost both links. Currently, the mechanism for handling this consists of setting and resetting two state flags from different locations in the code. This solution is hard to understand and maintain. A closer analysis even reveals that it is not completely safe. In this commit we do instead introduce an FSM that keeps track of the conditions for when the node can establish and maintain links. It has six states and four events, and is strictly based on explicit knowledge about the own node's and the peer node's contact states. Only events leading to state change are shown as edges in the figure below. +--------------+ | SELF_UP/ | +---------------->| PEER_COMING |-----------------+ SELF_ | +--------------+ |PEER_ ESTBL_ | | |ESTBL_ CONTACT| SELF_LOST_CONTACT | |CONTACT | v | | +--------------+ | | PEER_ | SELF_DOWN/ | SELF_ | | LOST_ +--| PEER_LEAVING |<--+ LOST_ v +-------------+ CONTACT | +--------------+ | CONTACT +-----------+ | SELF_DOWN/ |<----------+ +----------| SELF_UP/ | | PEER_DOWN |<----------+ +----------| PEER_UP | +-------------+ SELF_ | +--------------+ | PEER_ +-----------+ | LOST_ +--| SELF_LEAVING/|<--+ LOST_ A | CONTACT | PEER_DOWN | CONTACT | | +--------------+ | | A | PEER_ | PEER_LOST_CONTACT | |SELF_ ESTBL_ | | |ESTBL_ CONTACT| +--------------+ |CONTACT +---------------->| PEER_UP/ |-----------------+ | SELF_COMING | +--------------+ Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:30 -06:00
int state;
tipc: move link synch and failover to link aggregation level Link failover and synchronization have until now been handled by the links themselves, forcing them to have knowledge about and to access parallel links in order to make the two algorithms work correctly. In this commit, we move the control part of this functionality to the link aggregation level in node.c, which is the right location for this. As a result, the two algorithms become easier to follow, and the link implementation becomes simpler. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30 16:24:19 -06:00
u16 sync_point;
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
int link_cnt;
tipc: add framework for node capabilities exchange The TIPC protocol spec has defined a 13 bit capability bitmap in the neighbor discovery header, as a means to maintain compatibility between different code and protocol generations. Until now this field has been unused. We now introduce the basic framework for exchanging capabilities between nodes at first contact. After exchange, a peer node's capabilities are stored as a 16 bit bitmap in struct tipc_node. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-13 14:08:05 -06:00
u16 working_links;
u16 capabilities;
tipc: Introduce node signature field in neighbor discovery message Adds support for the new "node signature" in neighbor discovery messages, which is a 16 bit identifier chosen randomly when TIPC is initialized. This field makes it possible for nodes receiving a neighbor discovery message to detect if multiple neighboring nodes are using the same network address (i.e. <Z.C.N>), even when the messages are arriving on different interfaces. This first phase of node signature support creates the signature, incorporates it into outgoing neighbor discovery messages, and tracks the signature used by valid neighbors. An upcoming patch builds on this foundation to implement the improved duplicate neighbor detection checking. Signed-off-by: Allan Stephens <allan.stephens@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28 14:26:41 -06:00
u32 signature;
tipc: fix a potential deadlock Locking dependency detected below possible unsafe locking scenario: CPU0 CPU1 T0: tipc_named_rcv() tipc_rcv() T1: [grab nametble write lock]* [grab node lock]* T2: tipc_update_nametbl() tipc_node_link_up() T3: tipc_nodesub_subscribe() tipc_nametbl_publish() T4: [grab node lock]* [grab nametble write lock]* The opposite order of holding nametbl write lock and node lock on above two different paths may result in a deadlock. If we move the the updating of the name table after link state named out of node lock, the reverse order of holding locks will be eliminated, and as a result, the deadlock risk. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20 00:44:25 -06:00
u32 link_id;
tipc: remove node subscription infrastructure The node subscribe infrastructure represents a virtual base class, so its users, such as struct tipc_port and struct publication, can derive its implemented functionalities. However, after the removal of struct tipc_port, struct publication is left as its only single user now. So defining an abstract infrastructure for one user becomes no longer reasonable. If corresponding new functions associated with the infrastructure are moved to name_table.c file, the node subscription infrastructure can be removed as well. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25 20:41:45 -07:00
struct list_head publ_list;
tipc: use message to abort connections when losing contact to node In the current implementation, each 'struct tipc_node' instance keeps a linked list of those ports/sockets that are connected to the node represented by that struct. The purpose of this is to let the node object know which sockets to alert when it loses contact with its peer node, i.e., which sockets need to have their connections aborted. This entails an unwanted direct reference from the node structure back to the port/socket structure, and a need to grab port_lock when we have to make an upcall to the port. We want to get rid of this unecessary BH entry point into the socket, and also eliminate its use of port_lock. In this commit, we instead let the node struct keep list of "connected socket" structs, which each represents a connected socket, but is allocated independently by the node at the moment of connection. If the node loses contact with its peer node, the list is traversed, and a "connection abort" message is created for each entry in the list. The message is sent to it respective connected socket using the ordinary data path, and the receiving socket aborts its connections upon reception of the message. This enables us to get rid of the direct reference from 'struct node' to ´struct port', and another unwanted BH access point to the latter. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22 16:09:08 -06:00
struct list_head conn_sks;
tipc: move link supervision timer to node level In our effort to move control of the links to the link aggregation layer, we move the perodic link supervision timer to struct tipc_node. The new timer is shared between all links belonging to the node, thus saving resources, while still kicking the FSM on both its pertaining links at each expiration. The current link timer and corresponding functions are removed. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:29 -06:00
unsigned long keepalive_intv;
struct timer_list timer;
tipc: tipc: convert node list and node hlist to RCU lists Convert tipc_node_list list and node_htable hash list to RCU lists. On read side, the two lists are protected with RCU read lock, and on update side, node_list_lock is applied to them. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26 22:54:37 -06:00
struct rcu_head rcu;
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
};
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 00:27:05 -07:00
struct tipc_node *tipc_node_find(struct net *net, u32 addr);
tipc: involve reference counter for node structure TIPC node hash node table is protected with rcu lock on read side. tipc_node_find() is used to look for a node object with node address through iterating the hash node table. As the entire process of what tipc_node_find() traverses the table is guarded with rcu read lock, it's safe for us. However, when callers use the node object returned by tipc_node_find(), there is no rcu read lock applied. Therefore, this is absolutely unsafe for callers of tipc_node_find(). Now we introduce a reference counter for node structure. Before tipc_node_find() returns node object to its caller, it first increases the reference counter. Accordingly, after its caller used it up, it decreases the counter again. This can prevent a node being used by one thread from being freed by another thread. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-26 04:10:24 -06:00
void tipc_node_put(struct tipc_node *node);
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 00:27:05 -07:00
void tipc_node_stop(struct net *net);
tipc: move received discovery data evaluation inside node.c The node lock is currently grabbed and and released in the function tipc_disc_rcv() in the file discover.c. As a preparation for the next commits, we need to move this node lock handling, along with the code area it is covering, to node.c. This commit introduces this change. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30 16:24:22 -06:00
void tipc_node_check_dest(struct net *net, u32 onode,
struct tipc_bearer *bearer,
u16 capabilities, u32 signature,
struct tipc_media_addr *maddr,
bool *respond, bool *dupl_addr);
tipc: move all link_reset() calls to link aggregation level In line with our effort to let the node level have full control over its links, we want to move all link reset calls from link.c to node.c. Some of the calls can be moved by simply moving the calling function, when this is the right thing to do. For the remaining calls we use the now established technique of returning a TIPC_LINK_DOWN_EVT flag from tipc_link_rcv(), whereafter we perform the reset call when the call returns. This change serves as a preparation for the coming commits. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30 16:24:16 -06:00
void tipc_node_delete_links(struct net *net, int bearer_id);
tipc: rename struct link* to struct tipc_link* This converts the following: struct link -> struct tipc_link struct link_req -> struct tipc_link_req struct link_name -> struct tipc_link_name Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-29 18:58:42 -07:00
void tipc_node_attach_link(struct tipc_node *n_ptr, struct tipc_link *l_ptr);
void tipc_node_detach_link(struct tipc_node *n_ptr, struct tipc_link *l_ptr);
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
bool tipc_node_is_up(struct tipc_node *n);
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 00:27:05 -07:00
int tipc_node_get_linkname(struct net *net, u32 bearer_id, u32 node,
char *linkname, size_t len);
tipc: convert node lock to rwlock According to the node FSM a node in state SELF_UP_PEER_UP cannot change state inside a lock context, except when a TUNNEL_PROTOCOL (SYNCH or FAILOVER) packet arrives. However, the node's individual links may still change state. Since each link now is protected by its own spinlock, we finally have the conditions in place to convert the node spinlock to an rwlock_t. If the node state and arriving packet type are rigth, we can let the link directly receive the packet under protection of its own spinlock and the node lock in read mode. In all other cases we use the node lock in write mode. This enables full concurrent execution between parallel links during steady-state traffic situations, i.e., 99+ % of the time. This commit implements this change. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-19 12:30:44 -07:00
void tipc_node_read_lock(struct tipc_node *n);
void tipc_node_read_unlock(struct tipc_node *node);
tipc: make media xmit call outside node spinlock context Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significant part of the transmission time. This is clearly detrimental to overall throughput performance; it would be better if we could send the message after the spinlock has been released. In this commit, we do instead let the call revert on the stack after the buffer chain has been added to the transmission queue, whereafter clones of the buffers are transmitted to the device layer outside the spinlock scope. As a further step in our effort to separate the roles of the node and link entities we also move the function tipc_link_xmit() to node.c, and rename it to tipc_node_xmit(). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:24 -06:00
int tipc_node_xmit(struct net *net, struct sk_buff_head *list, u32 dnode,
int selector);
int tipc_node_xmit_skb(struct net *net, struct sk_buff *skb, u32 dest,
u32 selector);
tipc: reduce code dependency between binding table and node layer The file name_distr.c currently contains three functions, named_cluster_distribute(), tipc_publ_subcscribe() and tipc_publ_unsubscribe() that all directly access fields in struct tipc_node. We want to eliminate such dependencies, so we move those functions to the file node.c and rename them to tipc_node_broadcast(), tipc_node_subscribe() and tipc_node_unsubscribe() respectively. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-19 12:30:42 -07:00
void tipc_node_subscribe(struct net *net, struct list_head *subscr, u32 addr);
void tipc_node_unsubscribe(struct net *net, struct list_head *subscr, u32 addr);
void tipc_node_broadcast(struct net *net, struct sk_buff *skb);
tipc: make tipc node table aware of net namespace Global variables associated with node table are below: - node table list (node_htable) - node hash table list (tipc_node_list) - node table lock (node_list_lock) - node number counter (tipc_num_nodes) - node link number counter (tipc_num_links) To make node table support namespace, above global variables must be moved to tipc_net structure in order to keep secret for different namespaces. As a consequence, these variables are allocated and initialized when namespace is created, and deallocated when namespace is destroyed. After the change, functions associated with these variables have to utilize a namespace pointer to access them. So adding namespace pointer as a parameter of these functions is the major change made in the commit. Signed-off-by: Ying Xue <ying.xue@windriver.com> Tested-by: Tero Aho <Tero.Aho@coriant.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09 00:27:05 -07:00
int tipc_node_add_conn(struct net *net, u32 dnode, u32 port, u32 peer_port);
void tipc_node_remove_conn(struct net *net, u32 dnode, u32 port);
tipc: add node get/dump to new netlink api Add TIPC_NL_NODE_GET to the new tipc netlink API. This command can dump the address and node status of all nodes in the tipc cluster. Netlink logical layout of returned node/address data: -> node -> address -> up flag Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20 02:29:17 -07:00
int tipc_nl_node_dump(struct sk_buff *skb, struct netlink_callback *cb);
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
static inline struct tipc_link *node_active_link(struct tipc_node *n, int sel)
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25 19:41:33 -06:00
{
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
int bearer_id = n->active_links[sel & 1];
if (unlikely(bearer_id == INVALID_BEARER_ID))
return NULL;
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25 19:41:33 -06:00
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
return n->links[bearer_id].link;
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
}
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25 19:41:33 -06:00
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
static inline unsigned int tipc_node_get_mtu(struct net *net, u32 addr, u32 sel)
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
{
struct tipc_node *n;
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
int bearer_id;
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
unsigned int mtu = MAX_MSG_SIZE;
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25 19:41:33 -06:00
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
n = tipc_node_find(net, addr);
if (unlikely(!n))
return mtu;
tipc: use bearer index when looking up active links struct tipc_node currently holds two arrays of link pointers; one, indexed by bearer identity, which contains all links irrespective of current state, and one two-slot array for the currently active link or links. The latter array contains direct pointers into the elements of the former. This has the effect that we cannot know the bearer id of a link when accessing it via the "active_links[]" array without actually dereferencing the pointer, something we want to avoid in some cases. In this commit, we do instead store the bearer identity in the "active_links" array, and use this as an index to find the right element in the overall link entry array. This change should be seen as a preparation for the later commits in this series. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:22 -06:00
bearer_id = n->active_links[sel & 1];
if (likely(bearer_id != INVALID_BEARER_ID))
mtu = n->links[bearer_id].mtu;
tipc: introduce link entry structure to struct tipc_node struct 'tipc_node' currently contains two arrays for link attributes, one for the link pointers, and one for the usable link MTUs. We now group those into a new struct 'tipc_link_entry', and intoduce one single array consisting of such enties. Apart from being a cosmetic improvement, this is a starting point for the strict master-slave relation between node and link that we will introduce in the following commits. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16 14:54:19 -06:00
tipc_node_put(n);
tipc: make link mtu easily accessible from socket Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25 19:41:33 -06:00
return mtu;
}
[TIPC] Initial merge TIPC (Transparent Inter Process Communication) is a protocol designed for intra cluster communication. For more information see http://tipc.sourceforge.net Signed-off-by: Per Liden <per.liden@nospam.ericsson.com>
2006-01-02 11:04:38 -07:00
#endif