1
0
Fork 0
alistair23-linux/arch/nds32/kernel/traps.c

403 lines
9.8 KiB
C
Raw Normal View History

nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2005-2017 Andes Technology Corporation
#include <linux/module.h>
#include <linux/personality.h>
#include <linux/kallsyms.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/sched/task_stack.h>
#include <linux/uaccess.h>
#include <linux/ftrace.h>
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
#include <asm/proc-fns.h>
#include <asm/unistd.h>
#include <asm/fpu.h>
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
#include <linux/ptrace.h>
#include <nds32_intrinsic.h>
extern void show_pte(struct mm_struct *mm, unsigned long addr);
/*
* Dump out the contents of some memory nicely...
*/
void dump_mem(const char *lvl, unsigned long bottom, unsigned long top)
{
unsigned long first;
mm_segment_t fs;
int i;
/*
* We need to switch to kernel mode so that we can use __get_user
* to safely read from kernel space. Note that we now dump the
* code first, just in case the backtrace kills us.
*/
fs = get_fs();
set_fs(KERNEL_DS);
pr_emerg("%s(0x%08lx to 0x%08lx)\n", lvl, bottom, top);
for (first = bottom & ~31; first < top; first += 32) {
unsigned long p;
char str[sizeof(" 12345678") * 8 + 1];
memset(str, ' ', sizeof(str));
str[sizeof(str) - 1] = '\0';
for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
if (p >= bottom && p < top) {
unsigned long val;
if (__get_user(val, (unsigned long *)p) == 0)
sprintf(str + i * 9, " %08lx", val);
else
sprintf(str + i * 9, " ????????");
}
}
pr_emerg("%s%04lx:%s\n", lvl, first & 0xffff, str);
}
set_fs(fs);
}
EXPORT_SYMBOL(dump_mem);
static void dump_instr(struct pt_regs *regs)
{
unsigned long addr = instruction_pointer(regs);
mm_segment_t fs;
char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
int i;
return;
/*
* We need to switch to kernel mode so that we can use __get_user
* to safely read from kernel space. Note that we now dump the
* code first, just in case the backtrace kills us.
*/
fs = get_fs();
set_fs(KERNEL_DS);
pr_emerg("Code: ");
for (i = -4; i < 1; i++) {
unsigned int val, bad;
bad = __get_user(val, &((u32 *) addr)[i]);
if (!bad) {
p += sprintf(p, i == 0 ? "(%08x) " : "%08x ", val);
} else {
p += sprintf(p, "bad PC value");
break;
}
}
pr_emerg("Code: %s\n", str);
set_fs(fs);
}
#define LOOP_TIMES (100)
static void __dump(struct task_struct *tsk, unsigned long *base_reg)
{
unsigned long ret_addr;
int cnt = LOOP_TIMES, graph = 0;
pr_emerg("Call Trace:\n");
if (!IS_ENABLED(CONFIG_FRAME_POINTER)) {
while (!kstack_end(base_reg)) {
ret_addr = *base_reg++;
if (__kernel_text_address(ret_addr)) {
ret_addr = ftrace_graph_ret_addr(
tsk, &graph, ret_addr, NULL);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
print_ip_sym(ret_addr);
}
if (--cnt < 0)
break;
}
} else {
while (!kstack_end((void *)base_reg) &&
!((unsigned long)base_reg & 0x3) &&
((unsigned long)base_reg >= TASK_SIZE)) {
unsigned long next_fp;
ret_addr = base_reg[LP_OFFSET];
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
next_fp = base_reg[FP_OFFSET];
if (__kernel_text_address(ret_addr)) {
ret_addr = ftrace_graph_ret_addr(
tsk, &graph, ret_addr, NULL);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
print_ip_sym(ret_addr);
}
if (--cnt < 0)
break;
base_reg = (unsigned long *)next_fp;
}
}
pr_emerg("\n");
}
void show_stack(struct task_struct *tsk, unsigned long *sp)
{
unsigned long *base_reg;
if (!tsk)
tsk = current;
if (!IS_ENABLED(CONFIG_FRAME_POINTER)) {
if (tsk != current)
base_reg = (unsigned long *)(tsk->thread.cpu_context.sp);
else
__asm__ __volatile__("\tori\t%0, $sp, #0\n":"=r"(base_reg));
} else {
if (tsk != current)
base_reg = (unsigned long *)(tsk->thread.cpu_context.fp);
else
__asm__ __volatile__("\tori\t%0, $fp, #0\n":"=r"(base_reg));
}
__dump(tsk, base_reg);
barrier();
}
DEFINE_SPINLOCK(die_lock);
/*
* This function is protected against re-entrancy.
*/
void die(const char *str, struct pt_regs *regs, int err)
{
struct task_struct *tsk = current;
static int die_counter;
console_verbose();
spin_lock_irq(&die_lock);
bust_spinlocks(1);
pr_emerg("Internal error: %s: %x [#%d]\n", str, err, ++die_counter);
print_modules();
pr_emerg("CPU: %i\n", smp_processor_id());
show_regs(regs);
pr_emerg("Process %s (pid: %d, stack limit = 0x%p)\n",
tsk->comm, tsk->pid, end_of_stack(tsk));
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
if (!user_mode(regs) || in_interrupt()) {
dump_mem("Stack: ", regs->sp, (regs->sp + PAGE_SIZE) & PAGE_MASK);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
dump_instr(regs);
dump_stack();
}
bust_spinlocks(0);
spin_unlock_irq(&die_lock);
do_exit(SIGSEGV);
}
EXPORT_SYMBOL(die);
void die_if_kernel(const char *str, struct pt_regs *regs, int err)
{
if (user_mode(regs))
return;
die(str, regs, err);
}
int bad_syscall(int n, struct pt_regs *regs)
{
if (current->personality != PER_LINUX) {
send_sig(SIGSEGV, current, 1);
return regs->uregs[0];
}
force_sig_fault(SIGILL, ILL_ILLTRP,
(void __user *)instruction_pointer(regs) - 4);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
die_if_kernel("Oops - bad syscall", regs, n);
return regs->uregs[0];
}
void __pte_error(const char *file, int line, unsigned long val)
{
pr_emerg("%s:%d: bad pte %08lx.\n", file, line, val);
}
void __pmd_error(const char *file, int line, unsigned long val)
{
pr_emerg("%s:%d: bad pmd %08lx.\n", file, line, val);
}
void __pgd_error(const char *file, int line, unsigned long val)
{
pr_emerg("%s:%d: bad pgd %08lx.\n", file, line, val);
}
extern char *exception_vector, *exception_vector_end;
void __init trap_init(void)
{
return;
}
void __init early_trap_init(void)
{
unsigned long ivb = 0;
unsigned long base = PAGE_OFFSET;
memcpy((unsigned long *)base, (unsigned long *)&exception_vector,
((unsigned long)&exception_vector_end -
(unsigned long)&exception_vector));
ivb = __nds32__mfsr(NDS32_SR_IVB);
/* Check platform support. */
if (((ivb & IVB_mskNIVIC) >> IVB_offNIVIC) < 2)
panic
("IVIC mode is not allowed on the platform with interrupt controller\n");
__nds32__mtsr((ivb & ~IVB_mskESZ) | (IVB_valESZ16 << IVB_offESZ) |
IVB_BASE, NDS32_SR_IVB);
__nds32__mtsr(INT_MASK_INITAIAL_VAL, NDS32_SR_INT_MASK);
/*
* 0x800 = 128 vectors * 16byte.
* It should be enough to flush a page.
*/
cpu_cache_wbinval_page(base, true);
}
static void send_sigtrap(struct pt_regs *regs, int error_code, int si_code)
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
{
struct task_struct *tsk = current;
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
tsk->thread.trap_no = ENTRY_DEBUG_RELATED;
tsk->thread.error_code = error_code;
force_sig_fault(SIGTRAP, si_code,
(void __user *)instruction_pointer(regs));
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
}
void do_debug_trap(unsigned long entry, unsigned long addr,
unsigned long type, struct pt_regs *regs)
{
if (notify_die(DIE_OOPS, "Oops", regs, addr, type, SIGTRAP)
== NOTIFY_STOP)
return;
if (user_mode(regs)) {
/* trap_signal */
send_sigtrap(regs, 0, TRAP_BRKPT);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
} else {
/* kernel_trap */
if (!fixup_exception(regs))
die("unexpected kernel_trap", regs, 0);
}
}
void unhandled_interruption(struct pt_regs *regs)
{
pr_emerg("unhandled_interruption\n");
show_regs(regs);
if (!user_mode(regs))
do_exit(SIGKILL);
force_sig(SIGKILL);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
}
void unhandled_exceptions(unsigned long entry, unsigned long addr,
unsigned long type, struct pt_regs *regs)
{
pr_emerg("Unhandled Exception: entry: %lx addr:%lx itype:%lx\n", entry,
addr, type);
show_regs(regs);
if (!user_mode(regs))
do_exit(SIGKILL);
force_sig(SIGKILL);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
}
extern int do_page_fault(unsigned long entry, unsigned long addr,
unsigned int error_code, struct pt_regs *regs);
/*
* 2:DEF dispatch for TLB MISC exception handler
*/
void do_dispatch_tlb_misc(unsigned long entry, unsigned long addr,
unsigned long type, struct pt_regs *regs)
{
type = type & (ITYPE_mskINST | ITYPE_mskETYPE);
if ((type & ITYPE_mskETYPE) < 5) {
/* Permission exceptions */
do_page_fault(entry, addr, type, regs);
} else
unhandled_exceptions(entry, addr, type, regs);
}
void do_revinsn(struct pt_regs *regs)
{
pr_emerg("Reserved Instruction\n");
show_regs(regs);
if (!user_mode(regs))
do_exit(SIGILL);
force_sig(SIGILL);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
}
#ifdef CONFIG_ALIGNMENT_TRAP
extern int unalign_access_mode;
extern int do_unaligned_access(unsigned long addr, struct pt_regs *regs);
#endif
void do_dispatch_general(unsigned long entry, unsigned long addr,
unsigned long itype, struct pt_regs *regs,
unsigned long oipc)
{
unsigned int swid = itype >> ITYPE_offSWID;
unsigned long type = itype & (ITYPE_mskINST | ITYPE_mskETYPE);
if (type == ETYPE_ALIGNMENT_CHECK) {
#ifdef CONFIG_ALIGNMENT_TRAP
/* Alignment check */
if (user_mode(regs) && unalign_access_mode) {
int ret;
ret = do_unaligned_access(addr, regs);
if (ret == 0)
return;
if (ret == -EFAULT)
pr_emerg
("Unhandled unaligned access exception\n");
}
#endif
do_page_fault(entry, addr, type, regs);
} else if (type == ETYPE_RESERVED_INSTRUCTION) {
/* Reserved instruction */
do_revinsn(regs);
} else if (type == ETYPE_COPROCESSOR) {
/* Coprocessor */
#if IS_ENABLED(CONFIG_FPU)
unsigned int fucop_exist = __nds32__mfsr(NDS32_SR_FUCOP_EXIST);
unsigned int cpid = ((itype & ITYPE_mskCPID) >> ITYPE_offCPID);
if ((cpid == FPU_CPID) &&
(fucop_exist & FUCOP_EXIST_mskCP0ISFPU)) {
unsigned int subtype = (itype & ITYPE_mskSTYPE);
if (true == do_fpu_exception(subtype, regs))
return;
}
#endif
unhandled_exceptions(entry, addr, type, regs);
nds32: Exception handling This patch includes the exception/interrupt entries, pt_reg structure and related accessors. /* Unaligned accessing handling*/ Andes processors cannot load/store information which is not naturally aligned on the bus, i.e., loading a 4 byte data whose start address must be divisible by 4. If unaligned data accessing is happened, data unaligned exception will be triggered and user will get SIGSEGV or kernel oops according to the unaligned address. In order to make user be able to load/store data from an unaligned address, software load/store emulation is implemented in arch/nds32/mm/alignment.c to address data unaligned exception. Unaligned accessing handling is disabled by default because it is not a normal case. User can enable this feature by following steps. A. Compile time: 1. Enable kernel config CONFIG_ALIGNMENT_TRAP B. Run time: 1. Enter /proc/sys/nds32/unaligned_acess folder 2. Write 1 to file enable_mode to enable unaligned accessing handling. User can disable it by writing 0 to this file. 3. Write 1 to file debug to show which unaligned address is under processing. User can disable it by writing 0 to this file. However, unaligned accessing handler cannot work if this unaligned address is not accessible such as protection violation. On this condition, the default behaviors for addressing data unaligned exception still happen Signed-off-by: Vincent Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-24 00:42:02 -06:00
} else if (type == ETYPE_TRAP && swid == SWID_RAISE_INTERRUPT_LEVEL) {
/* trap, used on v3 EDM target debugging workaround */
/*
* DIPC(OIPC) is passed as parameter before
* interrupt is enabled, so the DIPC will not be corrupted
* even though interrupts are coming in
*/
/*
* 1. update ipc
* 2. update pt_regs ipc with oipc
* 3. update pt_regs ipsw (clear DEX)
*/
__asm__ volatile ("mtsr %0, $IPC\n\t"::"r" (oipc));
regs->ipc = oipc;
if (regs->pipsw & PSW_mskDEX) {
pr_emerg
("Nested Debug exception is possibly happened\n");
pr_emerg("ipc:%08x pipc:%08x\n",
(unsigned int)regs->ipc,
(unsigned int)regs->pipc);
}
do_debug_trap(entry, addr, itype, regs);
regs->ipsw &= ~PSW_mskDEX;
} else
unhandled_exceptions(entry, addr, type, regs);
}