1
0
Fork 0
alistair23-linux/arch/s390/kernel/setup.c

1006 lines
26 KiB
C
Raw Normal View History

/*
* arch/s390/kernel/setup.c
*
* S390 version
* Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
* Author(s): Hartmut Penner (hp@de.ibm.com),
* Martin Schwidefsky (schwidefsky@de.ibm.com)
*
* Derived from "arch/i386/kernel/setup.c"
* Copyright (C) 1995, Linus Torvalds
*/
/*
* This file handles the architecture-dependent parts of initialization
*/
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/initrd.h>
#include <linux/bootmem.h>
#include <linux/root_dev.h>
#include <linux/console.h>
#include <linux/seq_file.h>
#include <linux/kernel_stat.h>
#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/pfn.h>
#include <linux/ctype.h>
#include <linux/reboot.h>
#include <asm/ipl.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/smp.h>
#include <asm/mmu_context.h>
#include <asm/cpcmd.h>
#include <asm/lowcore.h>
#include <asm/irq.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/sections.h>
#include <asm/ebcdic.h>
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
#include <asm/compat.h>
long psw_kernel_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
long psw_user_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
PSW_MASK_PSTATE | PSW_DEFAULT_KEY);
/*
* User copy operations.
*/
struct uaccess_ops uaccess;
EXPORT_SYMBOL(uaccess);
/*
* Machine setup..
*/
unsigned int console_mode = 0;
unsigned int console_devno = -1;
unsigned int console_irq = -1;
unsigned long machine_flags = 0;
unsigned long elf_hwcap = 0;
char elf_platform[ELF_PLATFORM_SIZE];
struct mem_chunk __initdata memory_chunk[MEMORY_CHUNKS];
volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */
static unsigned long __initdata memory_end;
/*
* This is set up by the setup-routine at boot-time
* for S390 need to find out, what we have to setup
* using address 0x10400 ...
*/
#include <asm/setup.h>
static struct resource code_resource = {
.name = "Kernel code",
.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
};
static struct resource data_resource = {
.name = "Kernel data",
.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
};
/*
* cpu_init() initializes state that is per-CPU.
*/
void __cpuinit cpu_init(void)
{
int addr = hard_smp_processor_id();
/*
* Store processor id in lowcore (used e.g. in timer_interrupt)
*/
get_cpu_id(&S390_lowcore.cpu_data.cpu_id);
S390_lowcore.cpu_data.cpu_addr = addr;
/*
* Force FPU initialization:
*/
clear_thread_flag(TIF_USEDFPU);
clear_used_math();
atomic_inc(&init_mm.mm_count);
current->active_mm = &init_mm;
if (current->mm)
BUG();
enter_lazy_tlb(&init_mm, current);
}
/*
* VM halt and poweroff setup routines
*/
char vmhalt_cmd[128] = "";
char vmpoff_cmd[128] = "";
static char vmpanic_cmd[128] = "";
static void strncpy_skip_quote(char *dst, char *src, int n)
{
int sx, dx;
dx = 0;
for (sx = 0; src[sx] != 0; sx++) {
if (src[sx] == '"') continue;
dst[dx++] = src[sx];
if (dx >= n) break;
}
}
static int __init vmhalt_setup(char *str)
{
strncpy_skip_quote(vmhalt_cmd, str, 127);
vmhalt_cmd[127] = 0;
return 1;
}
__setup("vmhalt=", vmhalt_setup);
static int __init vmpoff_setup(char *str)
{
strncpy_skip_quote(vmpoff_cmd, str, 127);
vmpoff_cmd[127] = 0;
return 1;
}
__setup("vmpoff=", vmpoff_setup);
static int vmpanic_notify(struct notifier_block *self, unsigned long event,
void *data)
{
if (MACHINE_IS_VM && strlen(vmpanic_cmd) > 0)
cpcmd(vmpanic_cmd, NULL, 0, NULL);
return NOTIFY_OK;
}
#define PANIC_PRI_VMPANIC 0
static struct notifier_block vmpanic_nb = {
.notifier_call = vmpanic_notify,
.priority = PANIC_PRI_VMPANIC
};
static int __init vmpanic_setup(char *str)
{
static int register_done __initdata = 0;
strncpy_skip_quote(vmpanic_cmd, str, 127);
vmpanic_cmd[127] = 0;
if (!register_done) {
register_done = 1;
atomic_notifier_chain_register(&panic_notifier_list,
&vmpanic_nb);
}
return 1;
}
__setup("vmpanic=", vmpanic_setup);
/*
* condev= and conmode= setup parameter.
*/
static int __init condev_setup(char *str)
{
int vdev;
vdev = simple_strtoul(str, &str, 0);
if (vdev >= 0 && vdev < 65536) {
console_devno = vdev;
console_irq = -1;
}
return 1;
}
__setup("condev=", condev_setup);
static int __init conmode_setup(char *str)
{
#if defined(CONFIG_SCLP_CONSOLE)
if (strncmp(str, "hwc", 4) == 0 || strncmp(str, "sclp", 5) == 0)
SET_CONSOLE_SCLP;
#endif
#if defined(CONFIG_TN3215_CONSOLE)
if (strncmp(str, "3215", 5) == 0)
SET_CONSOLE_3215;
#endif
#if defined(CONFIG_TN3270_CONSOLE)
if (strncmp(str, "3270", 5) == 0)
SET_CONSOLE_3270;
#endif
return 1;
}
__setup("conmode=", conmode_setup);
static void __init conmode_default(void)
{
char query_buffer[1024];
char *ptr;
if (MACHINE_IS_VM) {
cpcmd("QUERY CONSOLE", query_buffer, 1024, NULL);
console_devno = simple_strtoul(query_buffer + 5, NULL, 16);
ptr = strstr(query_buffer, "SUBCHANNEL =");
console_irq = simple_strtoul(ptr + 13, NULL, 16);
cpcmd("QUERY TERM", query_buffer, 1024, NULL);
ptr = strstr(query_buffer, "CONMODE");
/*
* Set the conmode to 3215 so that the device recognition
* will set the cu_type of the console to 3215. If the
* conmode is 3270 and we don't set it back then both
* 3215 and the 3270 driver will try to access the console
* device (3215 as console and 3270 as normal tty).
*/
cpcmd("TERM CONMODE 3215", NULL, 0, NULL);
if (ptr == NULL) {
#if defined(CONFIG_SCLP_CONSOLE)
SET_CONSOLE_SCLP;
#endif
return;
}
if (strncmp(ptr + 8, "3270", 4) == 0) {
#if defined(CONFIG_TN3270_CONSOLE)
SET_CONSOLE_3270;
#elif defined(CONFIG_TN3215_CONSOLE)
SET_CONSOLE_3215;
#elif defined(CONFIG_SCLP_CONSOLE)
SET_CONSOLE_SCLP;
#endif
} else if (strncmp(ptr + 8, "3215", 4) == 0) {
#if defined(CONFIG_TN3215_CONSOLE)
SET_CONSOLE_3215;
#elif defined(CONFIG_TN3270_CONSOLE)
SET_CONSOLE_3270;
#elif defined(CONFIG_SCLP_CONSOLE)
SET_CONSOLE_SCLP;
#endif
}
} else if (MACHINE_IS_P390) {
#if defined(CONFIG_TN3215_CONSOLE)
SET_CONSOLE_3215;
#elif defined(CONFIG_TN3270_CONSOLE)
SET_CONSOLE_3270;
#endif
} else {
#if defined(CONFIG_SCLP_CONSOLE)
SET_CONSOLE_SCLP;
#endif
}
}
#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
static void __init setup_zfcpdump(unsigned int console_devno)
{
static char str[64];
if (ipl_info.type != IPL_TYPE_FCP_DUMP)
return;
if (console_devno != -1)
sprintf(str, "cio_ignore=all,!0.0.%04x,!0.0.%04x",
ipl_info.data.fcp.dev_id.devno, console_devno);
else
sprintf(str, "cio_ignore=all,!0.0.%04x",
ipl_info.data.fcp.dev_id.devno);
strcat(COMMAND_LINE, " ");
strcat(COMMAND_LINE, str);
console_loglevel = 2;
}
#else
static inline void setup_zfcpdump(unsigned int console_devno) {}
#endif /* CONFIG_ZFCPDUMP */
#ifdef CONFIG_SMP
void (*_machine_restart)(char *command) = machine_restart_smp;
void (*_machine_halt)(void) = machine_halt_smp;
void (*_machine_power_off)(void) = machine_power_off_smp;
#else
/*
* Reboot, halt and power_off routines for non SMP.
*/
static void do_machine_restart_nonsmp(char * __unused)
{
do_reipl();
}
static void do_machine_halt_nonsmp(void)
{
if (MACHINE_IS_VM && strlen(vmhalt_cmd) > 0)
__cpcmd(vmhalt_cmd, NULL, 0, NULL);
signal_processor(smp_processor_id(), sigp_stop_and_store_status);
}
static void do_machine_power_off_nonsmp(void)
{
if (MACHINE_IS_VM && strlen(vmpoff_cmd) > 0)
__cpcmd(vmpoff_cmd, NULL, 0, NULL);
signal_processor(smp_processor_id(), sigp_stop_and_store_status);
}
void (*_machine_restart)(char *command) = do_machine_restart_nonsmp;
void (*_machine_halt)(void) = do_machine_halt_nonsmp;
void (*_machine_power_off)(void) = do_machine_power_off_nonsmp;
#endif
/*
* Reboot, halt and power_off stubs. They just call _machine_restart,
* _machine_halt or _machine_power_off.
*/
void machine_restart(char *command)
{
[S390] magic sysrq: check for in_atomic before doing an console_unblank When doing an magic sysrq reboot on s390 the following bug message appears: SysRq : Resetting BUG: sleeping function called from invalid context at include/asm/semaphore.h:61 in_atomic():1, irqs_disabled():0 07000000004002a8 000000000fe6bc48 0000000000000002 0000000000000000 000000000fe6bce8 000000000fe6bc60 000000000fe6bc60 000000000012a79a 0000000000000000 07000000004002a8 0000000000000006 0000000000000000 0000000000000000 000000000fe6bc48 000000000000000d 000000000fe6bcb8 00000000004000c8 0000000000103234 000000000fe6bc48 000000000fe6bc90 Call Trace: (¬<00000000001031b2>| show_trace+0x12e/0x148) ¬<000000000011ffca>| __might_sleep+0x10a/0x118 ¬<0000000000129fba>| acquire_console_sem+0x92/0xf4 ¬<000000000012a2ca>| console_unblank+0xc2/0xc8 ¬<0000000000107bb4>| machine_restart+0x54/0x6c ¬<000000000028e806>| sysrq_handle_reboot+0x26/0x30 ¬<000000000028e52a>| __handle_sysrq+0xa6/0x180 ¬<0000000000140134>| run_workqueue+0xcc/0x18c ¬<000000000014029a>| worker_thread+0xa6/0x108 ¬<00000000001458e4>| kthread+0x64/0x9c ¬<0000000000106f0e>| kernel_thread_starter+0x6/0xc ¬<0000000000106f08>| kernel_thread_starter+0x0/0xc The only reason for doing a console_unblank on s390 is to flush the log buffer. We have to check for in_atomic before doing a console_unblank as the console is otherwise filled with an unrelated bug message. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20 03:13:31 -07:00
if ((!in_interrupt() && !in_atomic()) || oops_in_progress)
/*
* Only unblank the console if we are called in enabled
* context or a bust_spinlocks cleared the way for us.
*/
console_unblank();
_machine_restart(command);
}
void machine_halt(void)
{
if (!in_interrupt() || oops_in_progress)
/*
* Only unblank the console if we are called in enabled
* context or a bust_spinlocks cleared the way for us.
*/
console_unblank();
_machine_halt();
}
void machine_power_off(void)
{
if (!in_interrupt() || oops_in_progress)
/*
* Only unblank the console if we are called in enabled
* context or a bust_spinlocks cleared the way for us.
*/
console_unblank();
_machine_power_off();
}
/*
* Dummy power off function.
*/
void (*pm_power_off)(void) = machine_power_off;
static int __init early_parse_mem(char *p)
{
memory_end = memparse(p, &p);
return 0;
}
early_param("mem", early_parse_mem);
/*
* "ipldelay=XXX[sm]" sets ipl delay in seconds or minutes
*/
static int __init early_parse_ipldelay(char *p)
{
unsigned long delay = 0;
delay = simple_strtoul(p, &p, 0);
switch (*p) {
case 's':
case 'S':
delay *= 1000000;
break;
case 'm':
case 'M':
delay *= 60 * 1000000;
}
/* now wait for the requested amount of time */
udelay(delay);
return 0;
}
early_param("ipldelay", early_parse_ipldelay);
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
#ifdef CONFIG_S390_SWITCH_AMODE
unsigned int switch_amode = 0;
EXPORT_SYMBOL_GPL(switch_amode);
static void set_amode_and_uaccess(unsigned long user_amode,
unsigned long user32_amode)
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
{
psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode |
PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
#ifdef CONFIG_COMPAT
psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode |
PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode |
PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK |
PSW32_MASK_PSTATE;
#endif
psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
PSW_MASK_MCHECK | PSW_DEFAULT_KEY;
if (MACHINE_HAS_MVCOS) {
printk("mvcos available.\n");
memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess));
} else {
printk("mvcos not available.\n");
memcpy(&uaccess, &uaccess_pt, sizeof(uaccess));
}
}
/*
* Switch kernel/user addressing modes?
*/
static int __init early_parse_switch_amode(char *p)
{
switch_amode = 1;
return 0;
}
early_param("switch_amode", early_parse_switch_amode);
#else /* CONFIG_S390_SWITCH_AMODE */
static inline void set_amode_and_uaccess(unsigned long user_amode,
unsigned long user32_amode)
{
}
#endif /* CONFIG_S390_SWITCH_AMODE */
#ifdef CONFIG_S390_EXEC_PROTECT
unsigned int s390_noexec = 0;
EXPORT_SYMBOL_GPL(s390_noexec);
/*
* Enable execute protection?
*/
static int __init early_parse_noexec(char *p)
{
if (!strncmp(p, "off", 3))
return 0;
switch_amode = 1;
s390_noexec = 1;
return 0;
}
early_param("noexec", early_parse_noexec);
#endif /* CONFIG_S390_EXEC_PROTECT */
static void setup_addressing_mode(void)
{
if (s390_noexec) {
printk("S390 execute protection active, ");
set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY);
} else if (switch_amode) {
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
printk("S390 address spaces switched, ");
set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY);
}
#ifdef CONFIG_TRACE_IRQFLAGS
sysc_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
io_restore_trace_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
#endif
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
}
static void __init
setup_lowcore(void)
{
struct _lowcore *lc;
int lc_pages;
/*
* Setup lowcore for boot cpu
*/
lc_pages = sizeof(void *) == 8 ? 2 : 1;
lc = (struct _lowcore *)
__alloc_bootmem(lc_pages * PAGE_SIZE, lc_pages * PAGE_SIZE, 0);
memset(lc, 0, lc_pages * PAGE_SIZE);
lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
lc->restart_psw.addr =
PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
if (switch_amode)
lc->restart_psw.mask |= PSW_ASC_HOME;
lc->external_new_psw.mask = psw_kernel_bits;
lc->external_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT;
lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
lc->program_new_psw.mask = psw_kernel_bits;
lc->program_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long)pgm_check_handler;
lc->mcck_new_psw.mask =
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT;
lc->mcck_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
lc->io_new_psw.mask = psw_kernel_bits;
lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
lc->ipl_device = S390_lowcore.ipl_device;
lc->jiffy_timer = -1LL;
lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
lc->async_stack = (unsigned long)
__alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE;
lc->panic_stack = (unsigned long)
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
lc->current_task = (unsigned long) init_thread_union.thread_info.task;
lc->thread_info = (unsigned long) &init_thread_union;
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE) {
lc->extended_save_area_addr = (__u32)
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0);
/* enable extended save area */
__ctl_set_bit(14, 29);
}
#endif
set_prefix((u32)(unsigned long) lc);
}
static void __init
setup_resources(void)
{
struct resource *res, *sub_res;
int i;
code_resource.start = (unsigned long) &_text;
code_resource.end = (unsigned long) &_etext - 1;
data_resource.start = (unsigned long) &_etext;
data_resource.end = (unsigned long) &_edata - 1;
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
res = alloc_bootmem_low(sizeof(struct resource));
res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
switch (memory_chunk[i].type) {
case CHUNK_READ_WRITE:
res->name = "System RAM";
break;
case CHUNK_READ_ONLY:
res->name = "System ROM";
res->flags |= IORESOURCE_READONLY;
break;
default:
res->name = "reserved";
}
res->start = memory_chunk[i].addr;
res->end = memory_chunk[i].addr + memory_chunk[i].size - 1;
request_resource(&iomem_resource, res);
if (code_resource.start >= res->start &&
code_resource.start <= res->end &&
code_resource.end > res->end) {
sub_res = alloc_bootmem_low(sizeof(struct resource));
memcpy(sub_res, &code_resource,
sizeof(struct resource));
sub_res->end = res->end;
code_resource.start = res->end + 1;
request_resource(res, sub_res);
}
if (code_resource.start >= res->start &&
code_resource.start <= res->end &&
code_resource.end <= res->end)
request_resource(res, &code_resource);
if (data_resource.start >= res->start &&
data_resource.start <= res->end &&
data_resource.end > res->end) {
sub_res = alloc_bootmem_low(sizeof(struct resource));
memcpy(sub_res, &data_resource,
sizeof(struct resource));
sub_res->end = res->end;
data_resource.start = res->end + 1;
request_resource(res, sub_res);
}
if (data_resource.start >= res->start &&
data_resource.start <= res->end &&
data_resource.end <= res->end)
request_resource(res, &data_resource);
}
}
unsigned long real_memory_size;
EXPORT_SYMBOL_GPL(real_memory_size);
static void __init setup_memory_end(void)
{
unsigned long memory_size;
unsigned long max_mem;
int i;
#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_ZFCPDUMP_MODULE)
if (ipl_info.type == IPL_TYPE_FCP_DUMP)
memory_end = ZFCPDUMP_HSA_SIZE;
#endif
memory_size = 0;
memory_end &= PAGE_MASK;
max_mem = memory_end ? min(VMALLOC_START, memory_end) : VMALLOC_START;
memory_end = min(max_mem, memory_end);
for (i = 0; i < MEMORY_CHUNKS; i++) {
struct mem_chunk *chunk = &memory_chunk[i];
real_memory_size = max(real_memory_size,
chunk->addr + chunk->size);
if (chunk->addr >= max_mem) {
memset(chunk, 0, sizeof(*chunk));
continue;
}
if (chunk->addr + chunk->size > max_mem)
chunk->size = max_mem - chunk->addr;
memory_size = max(memory_size, chunk->addr + chunk->size);
}
if (!memory_end)
memory_end = memory_size;
}
static void __init
setup_memory(void)
{
unsigned long bootmap_size;
unsigned long start_pfn, end_pfn;
int i;
/*
* partially used pages are not usable - thus
* we are rounding upwards:
*/
start_pfn = PFN_UP(__pa(&_end));
end_pfn = max_pfn = PFN_DOWN(memory_end);
#ifdef CONFIG_BLK_DEV_INITRD
/*
* Move the initrd in case the bitmap of the bootmem allocater
* would overwrite it.
*/
if (INITRD_START && INITRD_SIZE) {
unsigned long bmap_size;
unsigned long start;
bmap_size = bootmem_bootmap_pages(end_pfn - start_pfn + 1);
bmap_size = PFN_PHYS(bmap_size);
if (PFN_PHYS(start_pfn) + bmap_size > INITRD_START) {
start = PFN_PHYS(start_pfn) + bmap_size + PAGE_SIZE;
if (start + INITRD_SIZE > memory_end) {
printk("initrd extends beyond end of memory "
"(0x%08lx > 0x%08lx)\n"
"disabling initrd\n",
start + INITRD_SIZE, memory_end);
INITRD_START = INITRD_SIZE = 0;
} else {
printk("Moving initrd (0x%08lx -> 0x%08lx, "
"size: %ld)\n",
INITRD_START, start, INITRD_SIZE);
memmove((void *) start, (void *) INITRD_START,
INITRD_SIZE);
INITRD_START = start;
}
}
}
#endif
/*
* Initialize the boot-time allocator
*/
bootmap_size = init_bootmem(start_pfn, end_pfn);
/*
* Register RAM areas with the bootmem allocator.
*/
for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) {
unsigned long start_chunk, end_chunk, pfn;
if (memory_chunk[i].type != CHUNK_READ_WRITE)
continue;
start_chunk = PFN_DOWN(memory_chunk[i].addr);
end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1;
end_chunk = min(end_chunk, end_pfn);
if (start_chunk >= end_chunk)
continue;
add_active_range(0, start_chunk, end_chunk);
pfn = max(start_chunk, start_pfn);
for (; pfn <= end_chunk; pfn++)
page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY);
}
psw_set_key(PAGE_DEFAULT_KEY);
free_bootmem_with_active_regions(0, max_pfn);
/*
* Reserve memory used for lowcore/command line/kernel image.
*/
reserve_bootmem(0, (unsigned long)_ehead);
reserve_bootmem((unsigned long)_stext,
PFN_PHYS(start_pfn) - (unsigned long)_stext);
/*
* Reserve the bootmem bitmap itself as well. We do this in two
* steps (first step was init_bootmem()) because this catches
* the (very unlikely) case of us accidentally initializing the
* bootmem allocator with an invalid RAM area.
*/
reserve_bootmem(start_pfn << PAGE_SHIFT, bootmap_size);
#ifdef CONFIG_BLK_DEV_INITRD
if (INITRD_START && INITRD_SIZE) {
if (INITRD_START + INITRD_SIZE <= memory_end) {
reserve_bootmem(INITRD_START, INITRD_SIZE);
initrd_start = INITRD_START;
initrd_end = initrd_start + INITRD_SIZE;
} else {
printk("initrd extends beyond end of memory "
"(0x%08lx > 0x%08lx)\ndisabling initrd\n",
initrd_start + INITRD_SIZE, memory_end);
initrd_start = initrd_end = 0;
}
}
#endif
}
static __init unsigned int stfl(void)
{
asm volatile(
" .insn s,0xb2b10000,0(0)\n" /* stfl */
"0:\n"
EX_TABLE(0b,0b));
return S390_lowcore.stfl_fac_list;
}
static __init int stfle(unsigned long long *list, int doublewords)
{
typedef struct { unsigned long long _[doublewords]; } addrtype;
register unsigned long __nr asm("0") = doublewords - 1;
asm volatile(".insn s,0xb2b00000,%0" /* stfle */
: "=m" (*(addrtype *) list), "+d" (__nr) : : "cc");
return __nr + 1;
}
/*
* Setup hardware capabilities.
*/
static void __init setup_hwcaps(void)
{
static const int stfl_bits[6] = { 0, 2, 7, 17, 19, 21 };
struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data;
unsigned long long facility_list_extended;
unsigned int facility_list;
int i;
facility_list = stfl();
/*
* The store facility list bits numbers as found in the principles
* of operation are numbered with bit 1UL<<31 as number 0 to
* bit 1UL<<0 as number 31.
* Bit 0: instructions named N3, "backported" to esa-mode
* Bit 2: z/Architecture mode is active
* Bit 7: the store-facility-list-extended facility is installed
* Bit 17: the message-security assist is installed
* Bit 19: the long-displacement facility is installed
* Bit 21: the extended-immediate facility is installed
* These get translated to:
* HWCAP_S390_ESAN3 bit 0, HWCAP_S390_ZARCH bit 1,
* HWCAP_S390_STFLE bit 2, HWCAP_S390_MSA bit 3,
* HWCAP_S390_LDISP bit 4, and HWCAP_S390_EIMM bit 5.
*/
for (i = 0; i < 6; i++)
if (facility_list & (1UL << (31 - stfl_bits[i])))
elf_hwcap |= 1UL << i;
/*
* Check for additional facilities with store-facility-list-extended.
* stfle stores doublewords (8 byte) with bit 1ULL<<63 as bit 0
* and 1ULL<<0 as bit 63. Bits 0-31 contain the same information
* as stored by stfl, bits 32-xxx contain additional facilities.
* How many facility words are stored depends on the number of
* doublewords passed to the instruction. The additional facilites
* are:
* Bit 43: decimal floating point facility is installed
* translated to:
* HWCAP_S390_DFP bit 6.
*/
if ((elf_hwcap & (1UL << 2)) &&
stfle(&facility_list_extended, 1) > 0) {
if (facility_list_extended & (1ULL << (64 - 43)))
elf_hwcap |= 1UL << 6;
}
switch (cpuinfo->cpu_id.machine) {
case 0x9672:
#if !defined(CONFIG_64BIT)
default: /* Use "g5" as default for 31 bit kernels. */
#endif
strcpy(elf_platform, "g5");
break;
case 0x2064:
case 0x2066:
#if defined(CONFIG_64BIT)
default: /* Use "z900" as default for 64 bit kernels. */
#endif
strcpy(elf_platform, "z900");
break;
case 0x2084:
case 0x2086:
strcpy(elf_platform, "z990");
break;
case 0x2094:
strcpy(elf_platform, "z9-109");
break;
}
}
/*
* Setup function called from init/main.c just after the banner
* was printed.
*/
void __init
setup_arch(char **cmdline_p)
{
/*
* print what head.S has found out about the machine
*/
#ifndef CONFIG_64BIT
printk((MACHINE_IS_VM) ?
"We are running under VM (31 bit mode)\n" :
"We are running native (31 bit mode)\n");
printk((MACHINE_HAS_IEEE) ?
"This machine has an IEEE fpu\n" :
"This machine has no IEEE fpu\n");
#else /* CONFIG_64BIT */
printk((MACHINE_IS_VM) ?
"We are running under VM (64 bit mode)\n" :
"We are running native (64 bit mode)\n");
#endif /* CONFIG_64BIT */
/* Save unparsed command line copy for /proc/cmdline */
strlcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
*cmdline_p = COMMAND_LINE;
*(*cmdline_p + COMMAND_LINE_SIZE - 1) = '\0';
ROOT_DEV = Root_RAM0;
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) &_end;
if (MACHINE_HAS_MVCOS)
memcpy(&uaccess, &uaccess_mvcos, sizeof(uaccess));
else
memcpy(&uaccess, &uaccess_std, sizeof(uaccess));
parse_early_param();
setup_ipl_info();
setup_memory_end();
[S390] noexec protection This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05 13:18:17 -07:00
setup_addressing_mode();
setup_memory();
setup_resources();
setup_lowcore();
cpu_init();
__cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
smp_setup_cpu_possible_map();
/*
* Setup capabilities (ELF_HWCAP & ELF_PLATFORM).
*/
setup_hwcaps();
/*
* Create kernel page tables and switch to virtual addressing.
*/
paging_init();
/* Setup default console */
conmode_default();
/* Setup zfcpdump support */
setup_zfcpdump(console_devno);
}
void __cpuinit print_cpu_info(struct cpuinfo_S390 *cpuinfo)
{
printk(KERN_INFO "cpu %d "
#ifdef CONFIG_SMP
"phys_idx=%d "
#endif
"vers=%02X ident=%06X machine=%04X unused=%04X\n",
cpuinfo->cpu_nr,
#ifdef CONFIG_SMP
cpuinfo->cpu_addr,
#endif
cpuinfo->cpu_id.version,
cpuinfo->cpu_id.ident,
cpuinfo->cpu_id.machine,
cpuinfo->cpu_id.unused);
}
/*
* show_cpuinfo - Get information on one CPU for use by procfs.
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
static const char *hwcap_str[7] = {
"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp"
};
struct cpuinfo_S390 *cpuinfo;
unsigned long n = (unsigned long) v - 1;
int i;
s390_adjust_jiffies();
preempt_disable();
if (!n) {
seq_printf(m, "vendor_id : IBM/S390\n"
"# processors : %i\n"
"bogomips per cpu: %lu.%02lu\n",
num_online_cpus(), loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ))%100);
seq_puts(m, "features\t: ");
for (i = 0; i < 7; i++)
if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
seq_printf(m, "%s ", hwcap_str[i]);
seq_puts(m, "\n");
}
if (cpu_online(n)) {
#ifdef CONFIG_SMP
if (smp_processor_id() == n)
cpuinfo = &S390_lowcore.cpu_data;
else
cpuinfo = &lowcore_ptr[n]->cpu_data;
#else
cpuinfo = &S390_lowcore.cpu_data;
#endif
seq_printf(m, "processor %li: "
"version = %02X, "
"identification = %06X, "
"machine = %04X\n",
n, cpuinfo->cpu_id.version,
cpuinfo->cpu_id.ident,
cpuinfo->cpu_id.machine);
}
preempt_enable();
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? (void *)((unsigned long) *pos + 1) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};