redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/x86/include/asm/entry_arch.h

59 lines
1.9 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
* This file is designed to contain the BUILD_INTERRUPT specifications for
* all of the extra named interrupt vectors used by the architecture.
* Usually this is the Inter Process Interrupts (IPIs)
*/
/*
* The following vectors are part of the Linux architecture, there
* is no hardware IRQ pin equivalent for them, they are triggered
* through the ICC by us (IPIs)
*/
x86: replace CONFIG_X86_SMP with CONFIG_SMP The x86/Voyager subarch used to have this distinction between 'x86 SMP support' and 'Voyager SMP support': config X86_SMP bool depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64) This is a pointless distinction - Voyager can (and already does) use smp_ops to implement various SMP quirks it has - and it can be extended more to cover all the specialities of Voyager. So remove this complication in the Kconfig space. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-27 09:07:08 -07:00
#ifdef CONFIG_SMP
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
x86: convert to generic helpers for IPI function calls This converts x86, x86-64, and xen to use the new helpers for smp_call_function() and friends, and adds support for smp_call_function_single(). Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-06-26 03:21:54 -06:00
BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
x86, trace: Add irq vector tracepoints [Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 09:46:53 -06:00
BUILD_INTERRUPT3(irq_move_cleanup_interrupt, IRQ_MOVE_CLEANUP_VECTOR,
smp_irq_move_cleanup_interrupt)
BUILD_INTERRUPT3(reboot_interrupt, REBOOT_VECTOR, smp_reboot_interrupt)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#endif
x86: UV RTC: Rename generic_interrupt to x86_platform_ipi Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> LKML-Reference: <20091014142257.GE11048@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-14 08:22:57 -06:00
BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)
x86: UV, SGI RTC: add generic system vector This patch allocates a system interrupt vector for various platform specific uses. Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: john stultz <johnstul@us.ibm.com> LKML-Reference: <20090304185605.GA24419@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-04 11:56:05 -07:00
KVM: VMX: Register a new IPI for posted interrupt Posted Interrupt feature requires a special IPI to deliver posted interrupt to guest. And it should has a high priority so the interrupt will not be blocked by others. Normally, the posted interrupt will be consumed by vcpu if target vcpu is running and transparent to OS. But in some cases, the interrupt will arrive when target vcpu is scheduled out. And host will see it. So we need to register a dump handler to handle it. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 05:25:11 -06:00
#ifdef CONFIG_HAVE_KVM
x86, trace: Add irq vector tracepoints [Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 09:46:53 -06:00
BUILD_INTERRUPT3(kvm_posted_intr_ipi, POSTED_INTR_VECTOR,
smp_kvm_posted_intr_ipi)
x86/irq: Define a global vector for VT-d Posted-Interrupts Currently, we use a global vector as the Posted-Interrupts Notification Event for all the vCPUs in the system. We need to introduce another global vector for VT-d Posted-Interrtups, which will be used to wakeup the sleep vCPU when an external interrupt from a direct-assigned device happens for that vCPU. [ tglx: Removed a gazillion of extra newlines ] Signed-off-by: Feng Wu <feng.wu@intel.com> Cc: jiang.liu@linux.intel.com Link: http://lkml.kernel.org/r/1432026437-16560-4-git-send-email-feng.wu@intel.com Suggested-by: Yang Zhang <yang.z.zhang@intel.com> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-05-19 03:07:16 -06:00
BUILD_INTERRUPT3(kvm_posted_intr_wakeup_ipi, POSTED_INTR_WAKEUP_VECTOR,
smp_kvm_posted_intr_wakeup_ipi)
KVM: VMX: Register a new IPI for posted interrupt Posted Interrupt feature requires a special IPI to deliver posted interrupt to guest. And it should has a high priority so the interrupt will not be blocked by others. Normally, the posted interrupt will be consumed by vcpu if target vcpu is running and transparent to OS. But in some cases, the interrupt will arrive when target vcpu is scheduled out. And host will see it. So we need to register a dump handler to handle it. Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-11 05:25:11 -06:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
* every pentium local APIC has two 'local interrupts', with a
* soft-definable vector attached to both interrupts, one of
* which is a timer interrupt, the other one is error counter
* overflow. Linux uses the local APIC timer interrupt to get
* a much simpler SMP time architecture:
*/
#ifdef CONFIG_X86_LOCAL_APIC
x86: move mach-default/*.h files to asm/ We are getting rid of subarchitecture support - move the hook files to asm/. (These are now stale and should be replaced with more explicit runtime mechanisms - but the transition is simpler this way.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 11:34:09 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
irq_work: Add generic hardirq context callbacks Provide a mechanism that allows running code in IRQ context. It is most useful for NMI code that needs to interact with the rest of the system -- like wakeup a task to drain buffers. Perf currently has such a mechanism, so extract that and provide it as a generic feature, independent of perf so that others may also benefit. The IRQ context callback is generated through self-IPIs where possible, or on architectures like powerpc the decrementer (the built-in timer facility) is set to generate an interrupt immediately. Architectures that don't have anything like this get to do with a callback from the timer tick. These architectures can call irq_work_run() at the tail of any IRQ handlers that might enqueue such work (like the perf IRQ handler) to avoid undue latencies in processing the work. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [ various fixes ] Signed-off-by: Huang Ying <ying.huang@intel.com> LKML-Reference: <1287036094.7768.291.camel@yhuang-dev> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-14 00:01:34 -06:00
#ifdef CONFIG_IRQ_WORK
BUILD_INTERRUPT(irq_work_interrupt, IRQ_WORK_VECTOR)
x86: move mach-default/*.h files to asm/ We are getting rid of subarchitecture support - move the hook files to asm/. (These are now stale and should be replaced with more explicit runtime mechanisms - but the transition is simpler this way.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-28 11:34:09 -07:00
#endif
x86, mce: use 64bit machine check code on 32bit The 64bit machine check code is in many ways much better than the 32bit machine check code: it is more specification compliant, is cleaner, only has a single code base versus one per CPU, has better infrastructure for recovery, has a cleaner way to communicate with user space etc. etc. Use the 64bit code for 32bit too. This is the second attempt to do this. There was one a couple of years ago to unify this code for 32bit and 64bit. Back then this ran into some trouble with K7s and was reverted. I believe this time the K7 problems (and some others) are addressed. I went over the old handlers and was very careful to retain all quirks. But of course this needs a lot of testing on old systems. On newer 64bit capable systems I don't expect much problems because they have been already tested with the 64bit kernel. I made this a CONFIG for now that still allows to select the old machine check code. This is mostly to make testing easier, if someone runs into a problem we can ask them to try with the CONFIG switched. The new code is default y for more coverage. Once there is confidence the 64bit code works well on older hardware too the CONFIG_X86_OLD_MCE and the associated code can be easily removed. This causes a behaviour change for 32bit installations. They now have to install the mcelog package to be able to log corrected machine checks. The 64bit machine check code only handles CPUs which support the standard Intel machine check architecture described in the IA32 SDM. The 32bit code has special support for some older CPUs which have non standard machine check architectures, in particular WinChip C3 and Intel P5. I made those a separate CONFIG option and kept them for now. The WinChip variant could be probably removed without too much pain, it doesn't really do anything interesting. P5 is also disabled by default (like it was before) because many motherboards have it miswired, but according to Alan Cox a few embedded setups use that one. Forward ported/heavily changed version of old patch, original patch included review/fixes from Thomas Gleixner, Bert Wesarg. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 11:07:31 -06:00
#ifdef CONFIG_X86_THERMAL_VECTOR
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
#endif
x86, mce: enable MCE_INTEL for 32bit new MCE Enable the 64bit MCE_INTEL code (CMCI, thermal interrupts) for 32bit NEW_MCE. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-04-28 15:32:56 -06:00
#ifdef CONFIG_X86_MCE_THRESHOLD
BUILD_INTERRUPT(threshold_interrupt,THRESHOLD_APIC_VECTOR)
#endif
x86/mce/amd: Introduce deferred error interrupt handler Deferred errors indicate error conditions that were not corrected, but require no action from S/W (or action is optional).These errors provide info about a latent UC MCE that can occur when a poisoned data is consumed by the processor. Processors that report these errors can be configured to generate APIC interrupts to notify OS about the error. Provide an interrupt handler in this patch so that OS can catch these errors as and when they happen. Currently, we simply log the errors and exit the handler as S/W action is not mandated. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: x86-ml <x86@kernel.org> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1430913538-1415-5-git-send-email-Aravind.Gopalakrishnan@amd.com Signed-off-by: Borislav Petkov <bp@suse.de>
2015-05-06 05:58:56 -06:00
#ifdef CONFIG_X86_MCE_AMD
BUILD_INTERRUPT(deferred_error_interrupt, DEFERRED_ERROR_VECTOR)
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#endif
Copy permalink