1
0
Fork 0
alistair23-linux/drivers/pinctrl/intel/pinctrl-cherryview.c

1888 lines
52 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Cherryview/Braswell pinctrl driver
*
* Copyright (C) 2014, Intel Corporation
* Author: Mika Westerberg <mika.westerberg@linux.intel.com>
*
* This driver is based on the original Cherryview GPIO driver by
* Ning Li <ning.li@intel.com>
* Alan Cox <alan@linux.intel.com>
*/
#include <linux/acpi.h>
#include <linux/dmi.h>
#include <linux/gpio/driver.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include "pinctrl-intel.h"
#define CHV_INTSTAT 0x300
#define CHV_INTMASK 0x380
#define FAMILY_PAD_REGS_OFF 0x4400
#define FAMILY_PAD_REGS_SIZE 0x400
#define MAX_FAMILY_PAD_GPIO_NO 15
#define GPIO_REGS_SIZE 8
#define CHV_PADCTRL0 0x000
#define CHV_PADCTRL0_INTSEL_SHIFT 28
#define CHV_PADCTRL0_INTSEL_MASK (0xf << CHV_PADCTRL0_INTSEL_SHIFT)
#define CHV_PADCTRL0_TERM_UP BIT(23)
#define CHV_PADCTRL0_TERM_SHIFT 20
#define CHV_PADCTRL0_TERM_MASK (7 << CHV_PADCTRL0_TERM_SHIFT)
#define CHV_PADCTRL0_TERM_20K 1
#define CHV_PADCTRL0_TERM_5K 2
#define CHV_PADCTRL0_TERM_1K 4
#define CHV_PADCTRL0_PMODE_SHIFT 16
#define CHV_PADCTRL0_PMODE_MASK (0xf << CHV_PADCTRL0_PMODE_SHIFT)
#define CHV_PADCTRL0_GPIOEN BIT(15)
#define CHV_PADCTRL0_GPIOCFG_SHIFT 8
#define CHV_PADCTRL0_GPIOCFG_MASK (7 << CHV_PADCTRL0_GPIOCFG_SHIFT)
#define CHV_PADCTRL0_GPIOCFG_GPIO 0
#define CHV_PADCTRL0_GPIOCFG_GPO 1
#define CHV_PADCTRL0_GPIOCFG_GPI 2
#define CHV_PADCTRL0_GPIOCFG_HIZ 3
#define CHV_PADCTRL0_GPIOTXSTATE BIT(1)
#define CHV_PADCTRL0_GPIORXSTATE BIT(0)
#define CHV_PADCTRL1 0x004
#define CHV_PADCTRL1_CFGLOCK BIT(31)
#define CHV_PADCTRL1_INVRXTX_SHIFT 4
#define CHV_PADCTRL1_INVRXTX_MASK (0xf << CHV_PADCTRL1_INVRXTX_SHIFT)
#define CHV_PADCTRL1_INVRXTX_TXENABLE (2 << CHV_PADCTRL1_INVRXTX_SHIFT)
#define CHV_PADCTRL1_ODEN BIT(3)
#define CHV_PADCTRL1_INVRXTX_RXDATA (4 << CHV_PADCTRL1_INVRXTX_SHIFT)
#define CHV_PADCTRL1_INTWAKECFG_MASK 7
#define CHV_PADCTRL1_INTWAKECFG_FALLING 1
#define CHV_PADCTRL1_INTWAKECFG_RISING 2
#define CHV_PADCTRL1_INTWAKECFG_BOTH 3
#define CHV_PADCTRL1_INTWAKECFG_LEVEL 4
/**
* struct chv_alternate_function - A per group or per pin alternate function
* @pin: Pin number (only used in per pin configs)
* @mode: Mode the pin should be set in
* @invert_oe: Invert OE for this pin
*/
struct chv_alternate_function {
unsigned int pin;
u8 mode;
bool invert_oe;
};
/**
* struct chv_pincgroup - describes a CHV pin group
* @name: Name of the group
* @pins: An array of pins in this group
* @npins: Number of pins in this group
* @altfunc: Alternate function applied to all pins in this group
* @overrides: Alternate function override per pin or %NULL if not used
* @noverrides: Number of per pin alternate function overrides if
* @overrides != NULL.
*/
struct chv_pingroup {
const char *name;
const unsigned int *pins;
size_t npins;
struct chv_alternate_function altfunc;
const struct chv_alternate_function *overrides;
size_t noverrides;
};
/**
* struct chv_gpio_pinrange - A range of pins that can be used as GPIOs
* @base: Start pin number
* @npins: Number of pins in this range
*/
struct chv_gpio_pinrange {
unsigned int base;
unsigned int npins;
};
/**
* struct chv_community - A community specific configuration
* @uid: ACPI _UID used to match the community
* @pins: All pins in this community
* @npins: Number of pins
* @groups: All groups in this community
* @ngroups: Number of groups
* @functions: All functions in this community
* @nfunctions: Number of functions
* @gpio_ranges: An array of GPIO ranges in this community
* @ngpio_ranges: Number of GPIO ranges
* @nirqs: Total number of IRQs this community can generate
* @acpi_space_id: An address space ID for ACPI OpRegion handler
*/
struct chv_community {
const char *uid;
const struct pinctrl_pin_desc *pins;
size_t npins;
const struct chv_pingroup *groups;
size_t ngroups;
const struct intel_function *functions;
size_t nfunctions;
const struct chv_gpio_pinrange *gpio_ranges;
size_t ngpio_ranges;
size_t nirqs;
acpi_adr_space_type acpi_space_id;
};
struct chv_pin_context {
u32 padctrl0;
u32 padctrl1;
};
/**
* struct chv_pinctrl - CHV pinctrl private structure
* @dev: Pointer to the parent device
* @pctldesc: Pin controller description
* @pctldev: Pointer to the pin controller device
* @chip: GPIO chip in this pin controller
* @regs: MMIO registers
* @intr_lines: Stores mapping between 16 HW interrupt wires and GPIO
* offset (in GPIO number space)
* @community: Community this pinctrl instance represents
* @saved_intmask: Interrupt mask saved for system sleep
* @saved_pin_context: Pointer to a context of the pins saved for system sleep
*
* The first group in @groups is expected to contain all pins that can be
* used as GPIOs.
*/
struct chv_pinctrl {
struct device *dev;
struct pinctrl_desc pctldesc;
struct pinctrl_dev *pctldev;
struct gpio_chip chip;
void __iomem *regs;
unsigned intr_lines[16];
const struct chv_community *community;
u32 saved_intmask;
struct chv_pin_context *saved_pin_context;
};
#define ALTERNATE_FUNCTION(p, m, i) \
{ \
.pin = (p), \
.mode = (m), \
.invert_oe = (i), \
}
#define PIN_GROUP_WITH_ALT(n, p, m, i) \
{ \
.name = (n), \
.pins = (p), \
.npins = ARRAY_SIZE((p)), \
.altfunc.mode = (m), \
.altfunc.invert_oe = (i), \
}
#define PIN_GROUP_WITH_OVERRIDE(n, p, m, i, o) \
{ \
.name = (n), \
.pins = (p), \
.npins = ARRAY_SIZE((p)), \
.altfunc.mode = (m), \
.altfunc.invert_oe = (i), \
.overrides = (o), \
.noverrides = ARRAY_SIZE((o)), \
}
#define GPIO_PINRANGE(start, end) \
{ \
.base = (start), \
.npins = (end) - (start) + 1, \
}
static const struct pinctrl_pin_desc southwest_pins[] = {
PINCTRL_PIN(0, "FST_SPI_D2"),
PINCTRL_PIN(1, "FST_SPI_D0"),
PINCTRL_PIN(2, "FST_SPI_CLK"),
PINCTRL_PIN(3, "FST_SPI_D3"),
PINCTRL_PIN(4, "FST_SPI_CS1_B"),
PINCTRL_PIN(5, "FST_SPI_D1"),
PINCTRL_PIN(6, "FST_SPI_CS0_B"),
PINCTRL_PIN(7, "FST_SPI_CS2_B"),
PINCTRL_PIN(15, "UART1_RTS_B"),
PINCTRL_PIN(16, "UART1_RXD"),
PINCTRL_PIN(17, "UART2_RXD"),
PINCTRL_PIN(18, "UART1_CTS_B"),
PINCTRL_PIN(19, "UART2_RTS_B"),
PINCTRL_PIN(20, "UART1_TXD"),
PINCTRL_PIN(21, "UART2_TXD"),
PINCTRL_PIN(22, "UART2_CTS_B"),
PINCTRL_PIN(30, "MF_HDA_CLK"),
PINCTRL_PIN(31, "MF_HDA_RSTB"),
PINCTRL_PIN(32, "MF_HDA_SDIO"),
PINCTRL_PIN(33, "MF_HDA_SDO"),
PINCTRL_PIN(34, "MF_HDA_DOCKRSTB"),
PINCTRL_PIN(35, "MF_HDA_SYNC"),
PINCTRL_PIN(36, "MF_HDA_SDI1"),
PINCTRL_PIN(37, "MF_HDA_DOCKENB"),
PINCTRL_PIN(45, "I2C5_SDA"),
PINCTRL_PIN(46, "I2C4_SDA"),
PINCTRL_PIN(47, "I2C6_SDA"),
PINCTRL_PIN(48, "I2C5_SCL"),
PINCTRL_PIN(49, "I2C_NFC_SDA"),
PINCTRL_PIN(50, "I2C4_SCL"),
PINCTRL_PIN(51, "I2C6_SCL"),
PINCTRL_PIN(52, "I2C_NFC_SCL"),
PINCTRL_PIN(60, "I2C1_SDA"),
PINCTRL_PIN(61, "I2C0_SDA"),
PINCTRL_PIN(62, "I2C2_SDA"),
PINCTRL_PIN(63, "I2C1_SCL"),
PINCTRL_PIN(64, "I2C3_SDA"),
PINCTRL_PIN(65, "I2C0_SCL"),
PINCTRL_PIN(66, "I2C2_SCL"),
PINCTRL_PIN(67, "I2C3_SCL"),
PINCTRL_PIN(75, "SATA_GP0"),
PINCTRL_PIN(76, "SATA_GP1"),
PINCTRL_PIN(77, "SATA_LEDN"),
PINCTRL_PIN(78, "SATA_GP2"),
PINCTRL_PIN(79, "MF_SMB_ALERTB"),
PINCTRL_PIN(80, "SATA_GP3"),
PINCTRL_PIN(81, "MF_SMB_CLK"),
PINCTRL_PIN(82, "MF_SMB_DATA"),
PINCTRL_PIN(90, "PCIE_CLKREQ0B"),
PINCTRL_PIN(91, "PCIE_CLKREQ1B"),
PINCTRL_PIN(92, "GP_SSP_2_CLK"),
PINCTRL_PIN(93, "PCIE_CLKREQ2B"),
PINCTRL_PIN(94, "GP_SSP_2_RXD"),
PINCTRL_PIN(95, "PCIE_CLKREQ3B"),
PINCTRL_PIN(96, "GP_SSP_2_FS"),
PINCTRL_PIN(97, "GP_SSP_2_TXD"),
};
static const unsigned southwest_uart0_pins[] = { 16, 20 };
static const unsigned southwest_uart1_pins[] = { 15, 16, 18, 20 };
static const unsigned southwest_uart2_pins[] = { 17, 19, 21, 22 };
static const unsigned southwest_i2c0_pins[] = { 61, 65 };
static const unsigned southwest_hda_pins[] = { 30, 31, 32, 33, 34, 35, 36, 37 };
static const unsigned southwest_lpe_pins[] = {
30, 31, 32, 33, 34, 35, 36, 37, 92, 94, 96, 97,
};
static const unsigned southwest_i2c1_pins[] = { 60, 63 };
static const unsigned southwest_i2c2_pins[] = { 62, 66 };
static const unsigned southwest_i2c3_pins[] = { 64, 67 };
static const unsigned southwest_i2c4_pins[] = { 46, 50 };
static const unsigned southwest_i2c5_pins[] = { 45, 48 };
static const unsigned southwest_i2c6_pins[] = { 47, 51 };
static const unsigned southwest_i2c_nfc_pins[] = { 49, 52 };
static const unsigned southwest_spi3_pins[] = { 76, 79, 80, 81, 82 };
/* LPE I2S TXD pins need to have invert_oe set */
static const struct chv_alternate_function southwest_lpe_altfuncs[] = {
ALTERNATE_FUNCTION(30, 1, true),
ALTERNATE_FUNCTION(34, 1, true),
ALTERNATE_FUNCTION(97, 1, true),
};
/*
* Two spi3 chipselects are available in different mode than the main spi3
* functionality, which is using mode 1.
*/
static const struct chv_alternate_function southwest_spi3_altfuncs[] = {
ALTERNATE_FUNCTION(76, 3, false),
ALTERNATE_FUNCTION(80, 3, false),
};
static const struct chv_pingroup southwest_groups[] = {
PIN_GROUP_WITH_ALT("uart0_grp", southwest_uart0_pins, 2, false),
PIN_GROUP_WITH_ALT("uart1_grp", southwest_uart1_pins, 1, false),
PIN_GROUP_WITH_ALT("uart2_grp", southwest_uart2_pins, 1, false),
PIN_GROUP_WITH_ALT("hda_grp", southwest_hda_pins, 2, false),
PIN_GROUP_WITH_ALT("i2c0_grp", southwest_i2c0_pins, 1, true),
PIN_GROUP_WITH_ALT("i2c1_grp", southwest_i2c1_pins, 1, true),
PIN_GROUP_WITH_ALT("i2c2_grp", southwest_i2c2_pins, 1, true),
PIN_GROUP_WITH_ALT("i2c3_grp", southwest_i2c3_pins, 1, true),
PIN_GROUP_WITH_ALT("i2c4_grp", southwest_i2c4_pins, 1, true),
PIN_GROUP_WITH_ALT("i2c5_grp", southwest_i2c5_pins, 1, true),
PIN_GROUP_WITH_ALT("i2c6_grp", southwest_i2c6_pins, 1, true),
PIN_GROUP_WITH_ALT("i2c_nfc_grp", southwest_i2c_nfc_pins, 2, true),
PIN_GROUP_WITH_OVERRIDE("lpe_grp", southwest_lpe_pins, 1, false,
southwest_lpe_altfuncs),
PIN_GROUP_WITH_OVERRIDE("spi3_grp", southwest_spi3_pins, 2, false,
southwest_spi3_altfuncs),
};
static const char * const southwest_uart0_groups[] = { "uart0_grp" };
static const char * const southwest_uart1_groups[] = { "uart1_grp" };
static const char * const southwest_uart2_groups[] = { "uart2_grp" };
static const char * const southwest_hda_groups[] = { "hda_grp" };
static const char * const southwest_lpe_groups[] = { "lpe_grp" };
static const char * const southwest_i2c0_groups[] = { "i2c0_grp" };
static const char * const southwest_i2c1_groups[] = { "i2c1_grp" };
static const char * const southwest_i2c2_groups[] = { "i2c2_grp" };
static const char * const southwest_i2c3_groups[] = { "i2c3_grp" };
static const char * const southwest_i2c4_groups[] = { "i2c4_grp" };
static const char * const southwest_i2c5_groups[] = { "i2c5_grp" };
static const char * const southwest_i2c6_groups[] = { "i2c6_grp" };
static const char * const southwest_i2c_nfc_groups[] = { "i2c_nfc_grp" };
static const char * const southwest_spi3_groups[] = { "spi3_grp" };
/*
* Only do pinmuxing for certain LPSS devices for now. Rest of the pins are
* enabled only as GPIOs.
*/
static const struct intel_function southwest_functions[] = {
FUNCTION("uart0", southwest_uart0_groups),
FUNCTION("uart1", southwest_uart1_groups),
FUNCTION("uart2", southwest_uart2_groups),
FUNCTION("hda", southwest_hda_groups),
FUNCTION("lpe", southwest_lpe_groups),
FUNCTION("i2c0", southwest_i2c0_groups),
FUNCTION("i2c1", southwest_i2c1_groups),
FUNCTION("i2c2", southwest_i2c2_groups),
FUNCTION("i2c3", southwest_i2c3_groups),
FUNCTION("i2c4", southwest_i2c4_groups),
FUNCTION("i2c5", southwest_i2c5_groups),
FUNCTION("i2c6", southwest_i2c6_groups),
FUNCTION("i2c_nfc", southwest_i2c_nfc_groups),
FUNCTION("spi3", southwest_spi3_groups),
};
static const struct chv_gpio_pinrange southwest_gpio_ranges[] = {
GPIO_PINRANGE(0, 7),
GPIO_PINRANGE(15, 22),
GPIO_PINRANGE(30, 37),
GPIO_PINRANGE(45, 52),
GPIO_PINRANGE(60, 67),
GPIO_PINRANGE(75, 82),
GPIO_PINRANGE(90, 97),
};
static const struct chv_community southwest_community = {
.uid = "1",
.pins = southwest_pins,
.npins = ARRAY_SIZE(southwest_pins),
.groups = southwest_groups,
.ngroups = ARRAY_SIZE(southwest_groups),
.functions = southwest_functions,
.nfunctions = ARRAY_SIZE(southwest_functions),
.gpio_ranges = southwest_gpio_ranges,
.ngpio_ranges = ARRAY_SIZE(southwest_gpio_ranges),
/*
* Southwest community can benerate GPIO interrupts only for the
* first 8 interrupts. The upper half (8-15) can only be used to
* trigger GPEs.
*/
.nirqs = 8,
.acpi_space_id = 0x91,
};
static const struct pinctrl_pin_desc north_pins[] = {
PINCTRL_PIN(0, "GPIO_DFX_0"),
PINCTRL_PIN(1, "GPIO_DFX_3"),
PINCTRL_PIN(2, "GPIO_DFX_7"),
PINCTRL_PIN(3, "GPIO_DFX_1"),
PINCTRL_PIN(4, "GPIO_DFX_5"),
PINCTRL_PIN(5, "GPIO_DFX_4"),
PINCTRL_PIN(6, "GPIO_DFX_8"),
PINCTRL_PIN(7, "GPIO_DFX_2"),
PINCTRL_PIN(8, "GPIO_DFX_6"),
PINCTRL_PIN(15, "GPIO_SUS0"),
PINCTRL_PIN(16, "SEC_GPIO_SUS10"),
PINCTRL_PIN(17, "GPIO_SUS3"),
PINCTRL_PIN(18, "GPIO_SUS7"),
PINCTRL_PIN(19, "GPIO_SUS1"),
PINCTRL_PIN(20, "GPIO_SUS5"),
PINCTRL_PIN(21, "SEC_GPIO_SUS11"),
PINCTRL_PIN(22, "GPIO_SUS4"),
PINCTRL_PIN(23, "SEC_GPIO_SUS8"),
PINCTRL_PIN(24, "GPIO_SUS2"),
PINCTRL_PIN(25, "GPIO_SUS6"),
PINCTRL_PIN(26, "CX_PREQ_B"),
PINCTRL_PIN(27, "SEC_GPIO_SUS9"),
PINCTRL_PIN(30, "TRST_B"),
PINCTRL_PIN(31, "TCK"),
PINCTRL_PIN(32, "PROCHOT_B"),
PINCTRL_PIN(33, "SVIDO_DATA"),
PINCTRL_PIN(34, "TMS"),
PINCTRL_PIN(35, "CX_PRDY_B_2"),
PINCTRL_PIN(36, "TDO_2"),
PINCTRL_PIN(37, "CX_PRDY_B"),
PINCTRL_PIN(38, "SVIDO_ALERT_B"),
PINCTRL_PIN(39, "TDO"),
PINCTRL_PIN(40, "SVIDO_CLK"),
PINCTRL_PIN(41, "TDI"),
PINCTRL_PIN(45, "GP_CAMERASB_05"),
PINCTRL_PIN(46, "GP_CAMERASB_02"),
PINCTRL_PIN(47, "GP_CAMERASB_08"),
PINCTRL_PIN(48, "GP_CAMERASB_00"),
PINCTRL_PIN(49, "GP_CAMERASB_06"),
PINCTRL_PIN(50, "GP_CAMERASB_10"),
PINCTRL_PIN(51, "GP_CAMERASB_03"),
PINCTRL_PIN(52, "GP_CAMERASB_09"),
PINCTRL_PIN(53, "GP_CAMERASB_01"),
PINCTRL_PIN(54, "GP_CAMERASB_07"),
PINCTRL_PIN(55, "GP_CAMERASB_11"),
PINCTRL_PIN(56, "GP_CAMERASB_04"),
PINCTRL_PIN(60, "PANEL0_BKLTEN"),
PINCTRL_PIN(61, "HV_DDI0_HPD"),
PINCTRL_PIN(62, "HV_DDI2_DDC_SDA"),
PINCTRL_PIN(63, "PANEL1_BKLTCTL"),
PINCTRL_PIN(64, "HV_DDI1_HPD"),
PINCTRL_PIN(65, "PANEL0_BKLTCTL"),
PINCTRL_PIN(66, "HV_DDI0_DDC_SDA"),
PINCTRL_PIN(67, "HV_DDI2_DDC_SCL"),
PINCTRL_PIN(68, "HV_DDI2_HPD"),
PINCTRL_PIN(69, "PANEL1_VDDEN"),
PINCTRL_PIN(70, "PANEL1_BKLTEN"),
PINCTRL_PIN(71, "HV_DDI0_DDC_SCL"),
PINCTRL_PIN(72, "PANEL0_VDDEN"),
};
static const struct chv_gpio_pinrange north_gpio_ranges[] = {
GPIO_PINRANGE(0, 8),
GPIO_PINRANGE(15, 27),
GPIO_PINRANGE(30, 41),
GPIO_PINRANGE(45, 56),
GPIO_PINRANGE(60, 72),
};
static const struct chv_community north_community = {
.uid = "2",
.pins = north_pins,
.npins = ARRAY_SIZE(north_pins),
.gpio_ranges = north_gpio_ranges,
.ngpio_ranges = ARRAY_SIZE(north_gpio_ranges),
/*
* North community can generate GPIO interrupts only for the first
* 8 interrupts. The upper half (8-15) can only be used to trigger
* GPEs.
*/
.nirqs = 8,
.acpi_space_id = 0x92,
};
static const struct pinctrl_pin_desc east_pins[] = {
PINCTRL_PIN(0, "PMU_SLP_S3_B"),
PINCTRL_PIN(1, "PMU_BATLOW_B"),
PINCTRL_PIN(2, "SUS_STAT_B"),
PINCTRL_PIN(3, "PMU_SLP_S0IX_B"),
PINCTRL_PIN(4, "PMU_AC_PRESENT"),
PINCTRL_PIN(5, "PMU_PLTRST_B"),
PINCTRL_PIN(6, "PMU_SUSCLK"),
PINCTRL_PIN(7, "PMU_SLP_LAN_B"),
PINCTRL_PIN(8, "PMU_PWRBTN_B"),
PINCTRL_PIN(9, "PMU_SLP_S4_B"),
PINCTRL_PIN(10, "PMU_WAKE_B"),
PINCTRL_PIN(11, "PMU_WAKE_LAN_B"),
PINCTRL_PIN(15, "MF_ISH_GPIO_3"),
PINCTRL_PIN(16, "MF_ISH_GPIO_7"),
PINCTRL_PIN(17, "MF_ISH_I2C1_SCL"),
PINCTRL_PIN(18, "MF_ISH_GPIO_1"),
PINCTRL_PIN(19, "MF_ISH_GPIO_5"),
PINCTRL_PIN(20, "MF_ISH_GPIO_9"),
PINCTRL_PIN(21, "MF_ISH_GPIO_0"),
PINCTRL_PIN(22, "MF_ISH_GPIO_4"),
PINCTRL_PIN(23, "MF_ISH_GPIO_8"),
PINCTRL_PIN(24, "MF_ISH_GPIO_2"),
PINCTRL_PIN(25, "MF_ISH_GPIO_6"),
PINCTRL_PIN(26, "MF_ISH_I2C1_SDA"),
};
static const struct chv_gpio_pinrange east_gpio_ranges[] = {
GPIO_PINRANGE(0, 11),
GPIO_PINRANGE(15, 26),
};
static const struct chv_community east_community = {
.uid = "3",
.pins = east_pins,
.npins = ARRAY_SIZE(east_pins),
.gpio_ranges = east_gpio_ranges,
.ngpio_ranges = ARRAY_SIZE(east_gpio_ranges),
.nirqs = 16,
.acpi_space_id = 0x93,
};
static const struct pinctrl_pin_desc southeast_pins[] = {
PINCTRL_PIN(0, "MF_PLT_CLK0"),
PINCTRL_PIN(1, "PWM1"),
PINCTRL_PIN(2, "MF_PLT_CLK1"),
PINCTRL_PIN(3, "MF_PLT_CLK4"),
PINCTRL_PIN(4, "MF_PLT_CLK3"),
PINCTRL_PIN(5, "PWM0"),
PINCTRL_PIN(6, "MF_PLT_CLK5"),
PINCTRL_PIN(7, "MF_PLT_CLK2"),
PINCTRL_PIN(15, "SDMMC2_D3_CD_B"),
PINCTRL_PIN(16, "SDMMC1_CLK"),
PINCTRL_PIN(17, "SDMMC1_D0"),
PINCTRL_PIN(18, "SDMMC2_D1"),
PINCTRL_PIN(19, "SDMMC2_CLK"),
PINCTRL_PIN(20, "SDMMC1_D2"),
PINCTRL_PIN(21, "SDMMC2_D2"),
PINCTRL_PIN(22, "SDMMC2_CMD"),
PINCTRL_PIN(23, "SDMMC1_CMD"),
PINCTRL_PIN(24, "SDMMC1_D1"),
PINCTRL_PIN(25, "SDMMC2_D0"),
PINCTRL_PIN(26, "SDMMC1_D3_CD_B"),
PINCTRL_PIN(30, "SDMMC3_D1"),
PINCTRL_PIN(31, "SDMMC3_CLK"),
PINCTRL_PIN(32, "SDMMC3_D3"),
PINCTRL_PIN(33, "SDMMC3_D2"),
PINCTRL_PIN(34, "SDMMC3_CMD"),
PINCTRL_PIN(35, "SDMMC3_D0"),
PINCTRL_PIN(45, "MF_LPC_AD2"),
PINCTRL_PIN(46, "LPC_CLKRUNB"),
PINCTRL_PIN(47, "MF_LPC_AD0"),
PINCTRL_PIN(48, "LPC_FRAMEB"),
PINCTRL_PIN(49, "MF_LPC_CLKOUT1"),
PINCTRL_PIN(50, "MF_LPC_AD3"),
PINCTRL_PIN(51, "MF_LPC_CLKOUT0"),
PINCTRL_PIN(52, "MF_LPC_AD1"),
PINCTRL_PIN(60, "SPI1_MISO"),
PINCTRL_PIN(61, "SPI1_CSO_B"),
PINCTRL_PIN(62, "SPI1_CLK"),
PINCTRL_PIN(63, "MMC1_D6"),
PINCTRL_PIN(64, "SPI1_MOSI"),
PINCTRL_PIN(65, "MMC1_D5"),
PINCTRL_PIN(66, "SPI1_CS1_B"),
PINCTRL_PIN(67, "MMC1_D4_SD_WE"),
PINCTRL_PIN(68, "MMC1_D7"),
PINCTRL_PIN(69, "MMC1_RCLK"),
PINCTRL_PIN(75, "USB_OC1_B"),
PINCTRL_PIN(76, "PMU_RESETBUTTON_B"),
PINCTRL_PIN(77, "GPIO_ALERT"),
PINCTRL_PIN(78, "SDMMC3_PWR_EN_B"),
PINCTRL_PIN(79, "ILB_SERIRQ"),
PINCTRL_PIN(80, "USB_OC0_B"),
PINCTRL_PIN(81, "SDMMC3_CD_B"),
PINCTRL_PIN(82, "SPKR"),
PINCTRL_PIN(83, "SUSPWRDNACK"),
PINCTRL_PIN(84, "SPARE_PIN"),
PINCTRL_PIN(85, "SDMMC3_1P8_EN"),
};
static const unsigned southeast_pwm0_pins[] = { 5 };
static const unsigned southeast_pwm1_pins[] = { 1 };
static const unsigned southeast_sdmmc1_pins[] = {
16, 17, 20, 23, 24, 26, 63, 65, 67, 68, 69,
};
static const unsigned southeast_sdmmc2_pins[] = { 15, 18, 19, 21, 22, 25 };
static const unsigned southeast_sdmmc3_pins[] = {
30, 31, 32, 33, 34, 35, 78, 81, 85,
};
static const unsigned southeast_spi1_pins[] = { 60, 61, 62, 64, 66 };
static const unsigned southeast_spi2_pins[] = { 2, 3, 4, 6, 7 };
static const struct chv_pingroup southeast_groups[] = {
PIN_GROUP_WITH_ALT("pwm0_grp", southeast_pwm0_pins, 1, false),
PIN_GROUP_WITH_ALT("pwm1_grp", southeast_pwm1_pins, 1, false),
PIN_GROUP_WITH_ALT("sdmmc1_grp", southeast_sdmmc1_pins, 1, false),
PIN_GROUP_WITH_ALT("sdmmc2_grp", southeast_sdmmc2_pins, 1, false),
PIN_GROUP_WITH_ALT("sdmmc3_grp", southeast_sdmmc3_pins, 1, false),
PIN_GROUP_WITH_ALT("spi1_grp", southeast_spi1_pins, 1, false),
PIN_GROUP_WITH_ALT("spi2_grp", southeast_spi2_pins, 4, false),
};
static const char * const southeast_pwm0_groups[] = { "pwm0_grp" };
static const char * const southeast_pwm1_groups[] = { "pwm1_grp" };
static const char * const southeast_sdmmc1_groups[] = { "sdmmc1_grp" };
static const char * const southeast_sdmmc2_groups[] = { "sdmmc2_grp" };
static const char * const southeast_sdmmc3_groups[] = { "sdmmc3_grp" };
static const char * const southeast_spi1_groups[] = { "spi1_grp" };
static const char * const southeast_spi2_groups[] = { "spi2_grp" };
static const struct intel_function southeast_functions[] = {
FUNCTION("pwm0", southeast_pwm0_groups),
FUNCTION("pwm1", southeast_pwm1_groups),
FUNCTION("sdmmc1", southeast_sdmmc1_groups),
FUNCTION("sdmmc2", southeast_sdmmc2_groups),
FUNCTION("sdmmc3", southeast_sdmmc3_groups),
FUNCTION("spi1", southeast_spi1_groups),
FUNCTION("spi2", southeast_spi2_groups),
};
static const struct chv_gpio_pinrange southeast_gpio_ranges[] = {
GPIO_PINRANGE(0, 7),
GPIO_PINRANGE(15, 26),
GPIO_PINRANGE(30, 35),
GPIO_PINRANGE(45, 52),
GPIO_PINRANGE(60, 69),
GPIO_PINRANGE(75, 85),
};
static const struct chv_community southeast_community = {
.uid = "4",
.pins = southeast_pins,
.npins = ARRAY_SIZE(southeast_pins),
.groups = southeast_groups,
.ngroups = ARRAY_SIZE(southeast_groups),
.functions = southeast_functions,
.nfunctions = ARRAY_SIZE(southeast_functions),
.gpio_ranges = southeast_gpio_ranges,
.ngpio_ranges = ARRAY_SIZE(southeast_gpio_ranges),
.nirqs = 16,
.acpi_space_id = 0x94,
};
static const struct chv_community *chv_communities[] = {
&southwest_community,
&north_community,
&east_community,
&southeast_community,
};
/*
* Lock to serialize register accesses
*
* Due to a silicon issue, a shared lock must be used to prevent
* concurrent accesses across the 4 GPIO controllers.
*
* See Intel Atom Z8000 Processor Series Specification Update (Rev. 005),
* errata #CHT34, for further information.
*/
static DEFINE_RAW_SPINLOCK(chv_lock);
static void __iomem *chv_padreg(struct chv_pinctrl *pctrl, unsigned int offset,
unsigned int reg)
{
unsigned int family_no = offset / MAX_FAMILY_PAD_GPIO_NO;
unsigned int pad_no = offset % MAX_FAMILY_PAD_GPIO_NO;
offset = FAMILY_PAD_REGS_OFF + FAMILY_PAD_REGS_SIZE * family_no +
GPIO_REGS_SIZE * pad_no;
return pctrl->regs + offset + reg;
}
static void chv_writel(u32 value, void __iomem *reg)
{
writel(value, reg);
/* simple readback to confirm the bus transferring done */
readl(reg);
}
/* When Pad Cfg is locked, driver can only change GPIOTXState or GPIORXState */
static bool chv_pad_locked(struct chv_pinctrl *pctrl, unsigned int offset)
{
void __iomem *reg;
reg = chv_padreg(pctrl, offset, CHV_PADCTRL1);
return readl(reg) & CHV_PADCTRL1_CFGLOCK;
}
static int chv_get_groups_count(struct pinctrl_dev *pctldev)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->community->ngroups;
}
static const char *chv_get_group_name(struct pinctrl_dev *pctldev,
unsigned int group)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->community->groups[group].name;
}
static int chv_get_group_pins(struct pinctrl_dev *pctldev, unsigned int group,
const unsigned int **pins, unsigned int *npins)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
*pins = pctrl->community->groups[group].pins;
*npins = pctrl->community->groups[group].npins;
return 0;
}
static void chv_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
unsigned int offset)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
unsigned long flags;
u32 ctrl0, ctrl1;
bool locked;
raw_spin_lock_irqsave(&chv_lock, flags);
ctrl0 = readl(chv_padreg(pctrl, offset, CHV_PADCTRL0));
ctrl1 = readl(chv_padreg(pctrl, offset, CHV_PADCTRL1));
locked = chv_pad_locked(pctrl, offset);
raw_spin_unlock_irqrestore(&chv_lock, flags);
if (ctrl0 & CHV_PADCTRL0_GPIOEN) {
seq_puts(s, "GPIO ");
} else {
u32 mode;
mode = ctrl0 & CHV_PADCTRL0_PMODE_MASK;
mode >>= CHV_PADCTRL0_PMODE_SHIFT;
seq_printf(s, "mode %d ", mode);
}
seq_printf(s, "0x%08x 0x%08x", ctrl0, ctrl1);
if (locked)
seq_puts(s, " [LOCKED]");
}
static const struct pinctrl_ops chv_pinctrl_ops = {
.get_groups_count = chv_get_groups_count,
.get_group_name = chv_get_group_name,
.get_group_pins = chv_get_group_pins,
.pin_dbg_show = chv_pin_dbg_show,
};
static int chv_get_functions_count(struct pinctrl_dev *pctldev)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->community->nfunctions;
}
static const char *chv_get_function_name(struct pinctrl_dev *pctldev,
unsigned int function)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->community->functions[function].name;
}
static int chv_get_function_groups(struct pinctrl_dev *pctldev,
unsigned int function,
const char * const **groups,
unsigned int * const ngroups)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
*groups = pctrl->community->functions[function].groups;
*ngroups = pctrl->community->functions[function].ngroups;
return 0;
}
static int chv_pinmux_set_mux(struct pinctrl_dev *pctldev,
unsigned int function, unsigned int group)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
const struct chv_pingroup *grp;
unsigned long flags;
int i;
grp = &pctrl->community->groups[group];
raw_spin_lock_irqsave(&chv_lock, flags);
/* Check first that the pad is not locked */
for (i = 0; i < grp->npins; i++) {
if (chv_pad_locked(pctrl, grp->pins[i])) {
dev_warn(pctrl->dev, "unable to set mode for locked pin %u\n",
grp->pins[i]);
raw_spin_unlock_irqrestore(&chv_lock, flags);
return -EBUSY;
}
}
for (i = 0; i < grp->npins; i++) {
const struct chv_alternate_function *altfunc = &grp->altfunc;
int pin = grp->pins[i];
void __iomem *reg;
u32 value;
/* Check if there is pin-specific config */
if (grp->overrides) {
int j;
for (j = 0; j < grp->noverrides; j++) {
if (grp->overrides[j].pin == pin) {
altfunc = &grp->overrides[j];
break;
}
}
}
reg = chv_padreg(pctrl, pin, CHV_PADCTRL0);
value = readl(reg);
/* Disable GPIO mode */
value &= ~CHV_PADCTRL0_GPIOEN;
/* Set to desired mode */
value &= ~CHV_PADCTRL0_PMODE_MASK;
value |= altfunc->mode << CHV_PADCTRL0_PMODE_SHIFT;
chv_writel(value, reg);
/* Update for invert_oe */
reg = chv_padreg(pctrl, pin, CHV_PADCTRL1);
value = readl(reg) & ~CHV_PADCTRL1_INVRXTX_MASK;
if (altfunc->invert_oe)
value |= CHV_PADCTRL1_INVRXTX_TXENABLE;
chv_writel(value, reg);
dev_dbg(pctrl->dev, "configured pin %u mode %u OE %sinverted\n",
pin, altfunc->mode, altfunc->invert_oe ? "" : "not ");
}
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
static void chv_gpio_clear_triggering(struct chv_pinctrl *pctrl,
unsigned int offset)
{
void __iomem *reg;
u32 value;
reg = chv_padreg(pctrl, offset, CHV_PADCTRL1);
value = readl(reg);
value &= ~CHV_PADCTRL1_INTWAKECFG_MASK;
value &= ~CHV_PADCTRL1_INVRXTX_MASK;
chv_writel(value, reg);
}
static int chv_gpio_request_enable(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
unsigned long flags;
void __iomem *reg;
u32 value;
raw_spin_lock_irqsave(&chv_lock, flags);
if (chv_pad_locked(pctrl, offset)) {
value = readl(chv_padreg(pctrl, offset, CHV_PADCTRL0));
if (!(value & CHV_PADCTRL0_GPIOEN)) {
/* Locked so cannot enable */
raw_spin_unlock_irqrestore(&chv_lock, flags);
return -EBUSY;
}
} else {
int i;
/* Reset the interrupt mapping */
for (i = 0; i < ARRAY_SIZE(pctrl->intr_lines); i++) {
if (pctrl->intr_lines[i] == offset) {
pctrl->intr_lines[i] = 0;
break;
}
}
/* Disable interrupt generation */
chv_gpio_clear_triggering(pctrl, offset);
reg = chv_padreg(pctrl, offset, CHV_PADCTRL0);
value = readl(reg);
/*
* If the pin is in HiZ mode (both TX and RX buffers are
* disabled) we turn it to be input now.
*/
if ((value & CHV_PADCTRL0_GPIOCFG_MASK) ==
(CHV_PADCTRL0_GPIOCFG_HIZ << CHV_PADCTRL0_GPIOCFG_SHIFT)) {
value &= ~CHV_PADCTRL0_GPIOCFG_MASK;
value |= CHV_PADCTRL0_GPIOCFG_GPI <<
CHV_PADCTRL0_GPIOCFG_SHIFT;
}
/* Switch to a GPIO mode */
value |= CHV_PADCTRL0_GPIOEN;
chv_writel(value, reg);
}
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
static void chv_gpio_disable_free(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
unsigned long flags;
raw_spin_lock_irqsave(&chv_lock, flags);
pinctrl: cherryview: Stop clearing the GPIO_EN bit from chv_gpio_disable_free Clearing the GPIO_EN bit from chv_gpio_disable_free is a bad idea and pinctrl-cherryview.c is the only Intel pinctrl driver doing something like this. Clearing the GPIO_EN bit means that if the pin was an output it is now effectively floating. The datasheet is not clear what happens to pull ups / downs in this case, but from testing it looks like these are disabled too, also floating input pins. One example where this is causing issues is the soc_button_array input driver, this parses ACPI tables to create 2 platform devices for the gpio_keys input driver. The list of GPIOs is passed through struct gpio_keys_platform_data which uses gpio numbers rather then gpio_desc pointers. The buttons handled by this drivers short the pin to ground when pressed and the volume buttons rely on the SoC's internal pull-up to pull the pin high when the button is not pressed. To get the gpio number, the soc_button_array code calls gpiod_get_index followed by a desc_to_gpio call and then gpiod_put on the gpio_desc. This last call causes chv_gpio_disable_free to clear the GPIO_EN bit. When the gpio_keys driver then loads next it gets the gpio_desc again causing the GPIO_EN bit to be set again and immediately reads the GPIO value which for the volume buttons reads 0 at this time, causing a spurious press of the volume buttons to get reported. Putting a small delay between the gpio_desc request and the read fixes this, I assume that this is caused by the pull-up being temporarily disabled while the GPIO_EN bit is cleared as the powerbutton which also has its GPIO_EN bit cleared does not have this problem. The soc_button_array code is not the only code temporarily requesting GPIOs the DWC3 PCI code also does this, to set the enable and reset GPIOs for the external phy, so that the code instantiating the ULPI phy can read the vendor and product ID registers from the phy. These GPIOs are released after this so that the PHY driver can claim and use them when it loads. Another example of temporary GPIO usage would be a user-space set_gpio utility using the userspace ioctls to set a GPIO as output value 0 or 1, having the GPIO revert to floating as soon as this utility exits would certainly be unexpected behavior. One argument in favor of clearing the GPIO_EN bit is if the GPIO is going to be muxed to another function after being released, but in that case chv_pinmux_set_mux() already clears it. TL;DR: Clearing the GPIO_EN bit from is a bad idea, this commit therefor removes the clearing from chv_gpio_disable_free(), replacing it with code to clear the interrupt-trigger condition so that the GPIO stops generating interrupts when released, as pinctrl-baytrail.c does. Note this commit adds a !chv_pad_locked() condition to the trigger clearing call, which the original GPIO_EN clearing code was missing. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-12-04 12:42:47 -07:00
if (!chv_pad_locked(pctrl, offset))
chv_gpio_clear_triggering(pctrl, offset);
raw_spin_unlock_irqrestore(&chv_lock, flags);
}
static int chv_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned int offset, bool input)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
void __iomem *reg = chv_padreg(pctrl, offset, CHV_PADCTRL0);
unsigned long flags;
u32 ctrl0;
raw_spin_lock_irqsave(&chv_lock, flags);
ctrl0 = readl(reg) & ~CHV_PADCTRL0_GPIOCFG_MASK;
if (input)
ctrl0 |= CHV_PADCTRL0_GPIOCFG_GPI << CHV_PADCTRL0_GPIOCFG_SHIFT;
else
ctrl0 |= CHV_PADCTRL0_GPIOCFG_GPO << CHV_PADCTRL0_GPIOCFG_SHIFT;
chv_writel(ctrl0, reg);
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
static const struct pinmux_ops chv_pinmux_ops = {
.get_functions_count = chv_get_functions_count,
.get_function_name = chv_get_function_name,
.get_function_groups = chv_get_function_groups,
.set_mux = chv_pinmux_set_mux,
.gpio_request_enable = chv_gpio_request_enable,
.gpio_disable_free = chv_gpio_disable_free,
.gpio_set_direction = chv_gpio_set_direction,
};
static int chv_config_get(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *config)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
enum pin_config_param param = pinconf_to_config_param(*config);
unsigned long flags;
u32 ctrl0, ctrl1;
u16 arg = 0;
u32 term;
raw_spin_lock_irqsave(&chv_lock, flags);
ctrl0 = readl(chv_padreg(pctrl, pin, CHV_PADCTRL0));
ctrl1 = readl(chv_padreg(pctrl, pin, CHV_PADCTRL1));
raw_spin_unlock_irqrestore(&chv_lock, flags);
term = (ctrl0 & CHV_PADCTRL0_TERM_MASK) >> CHV_PADCTRL0_TERM_SHIFT;
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
if (term)
return -EINVAL;
break;
case PIN_CONFIG_BIAS_PULL_UP:
if (!(ctrl0 & CHV_PADCTRL0_TERM_UP))
return -EINVAL;
switch (term) {
case CHV_PADCTRL0_TERM_20K:
arg = 20000;
break;
case CHV_PADCTRL0_TERM_5K:
arg = 5000;
break;
case CHV_PADCTRL0_TERM_1K:
arg = 1000;
break;
}
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
if (!term || (ctrl0 & CHV_PADCTRL0_TERM_UP))
return -EINVAL;
switch (term) {
case CHV_PADCTRL0_TERM_20K:
arg = 20000;
break;
case CHV_PADCTRL0_TERM_5K:
arg = 5000;
break;
}
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
if (!(ctrl1 & CHV_PADCTRL1_ODEN))
return -EINVAL;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: {
u32 cfg;
cfg = ctrl0 & CHV_PADCTRL0_GPIOCFG_MASK;
cfg >>= CHV_PADCTRL0_GPIOCFG_SHIFT;
if (cfg != CHV_PADCTRL0_GPIOCFG_HIZ)
return -EINVAL;
break;
}
default:
return -ENOTSUPP;
}
*config = pinconf_to_config_packed(param, arg);
return 0;
}
static int chv_config_set_pull(struct chv_pinctrl *pctrl, unsigned int pin,
enum pin_config_param param, u32 arg)
{
void __iomem *reg = chv_padreg(pctrl, pin, CHV_PADCTRL0);
unsigned long flags;
u32 ctrl0, pull;
raw_spin_lock_irqsave(&chv_lock, flags);
ctrl0 = readl(reg);
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
ctrl0 &= ~(CHV_PADCTRL0_TERM_MASK | CHV_PADCTRL0_TERM_UP);
break;
case PIN_CONFIG_BIAS_PULL_UP:
ctrl0 &= ~(CHV_PADCTRL0_TERM_MASK | CHV_PADCTRL0_TERM_UP);
switch (arg) {
case 1000:
/* For 1k there is only pull up */
pull = CHV_PADCTRL0_TERM_1K << CHV_PADCTRL0_TERM_SHIFT;
break;
case 5000:
pull = CHV_PADCTRL0_TERM_5K << CHV_PADCTRL0_TERM_SHIFT;
break;
case 20000:
pull = CHV_PADCTRL0_TERM_20K << CHV_PADCTRL0_TERM_SHIFT;
break;
default:
raw_spin_unlock_irqrestore(&chv_lock, flags);
return -EINVAL;
}
ctrl0 |= CHV_PADCTRL0_TERM_UP | pull;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
ctrl0 &= ~(CHV_PADCTRL0_TERM_MASK | CHV_PADCTRL0_TERM_UP);
switch (arg) {
case 5000:
pull = CHV_PADCTRL0_TERM_5K << CHV_PADCTRL0_TERM_SHIFT;
break;
case 20000:
pull = CHV_PADCTRL0_TERM_20K << CHV_PADCTRL0_TERM_SHIFT;
break;
default:
raw_spin_unlock_irqrestore(&chv_lock, flags);
return -EINVAL;
}
ctrl0 |= pull;
break;
default:
raw_spin_unlock_irqrestore(&chv_lock, flags);
return -EINVAL;
}
chv_writel(ctrl0, reg);
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
static int chv_config_set_oden(struct chv_pinctrl *pctrl, unsigned int pin,
bool enable)
{
void __iomem *reg = chv_padreg(pctrl, pin, CHV_PADCTRL1);
unsigned long flags;
u32 ctrl1;
raw_spin_lock_irqsave(&chv_lock, flags);
ctrl1 = readl(reg);
if (enable)
ctrl1 |= CHV_PADCTRL1_ODEN;
else
ctrl1 &= ~CHV_PADCTRL1_ODEN;
chv_writel(ctrl1, reg);
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
static int chv_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
unsigned long *configs, unsigned int nconfigs)
{
struct chv_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
enum pin_config_param param;
int i, ret;
u32 arg;
if (chv_pad_locked(pctrl, pin))
return -EBUSY;
for (i = 0; i < nconfigs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_UP:
case PIN_CONFIG_BIAS_PULL_DOWN:
ret = chv_config_set_pull(pctrl, pin, param, arg);
if (ret)
return ret;
break;
case PIN_CONFIG_DRIVE_PUSH_PULL:
ret = chv_config_set_oden(pctrl, pin, false);
if (ret)
return ret;
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
ret = chv_config_set_oden(pctrl, pin, true);
if (ret)
return ret;
break;
default:
return -ENOTSUPP;
}
dev_dbg(pctrl->dev, "pin %d set config %d arg %u\n", pin,
param, arg);
}
return 0;
}
static int chv_config_group_get(struct pinctrl_dev *pctldev,
unsigned int group,
unsigned long *config)
{
const unsigned int *pins;
unsigned int npins;
int ret;
ret = chv_get_group_pins(pctldev, group, &pins, &npins);
if (ret)
return ret;
ret = chv_config_get(pctldev, pins[0], config);
if (ret)
return ret;
return 0;
}
static int chv_config_group_set(struct pinctrl_dev *pctldev,
unsigned int group, unsigned long *configs,
unsigned int num_configs)
{
const unsigned int *pins;
unsigned int npins;
int i, ret;
ret = chv_get_group_pins(pctldev, group, &pins, &npins);
if (ret)
return ret;
for (i = 0; i < npins; i++) {
ret = chv_config_set(pctldev, pins[i], configs, num_configs);
if (ret)
return ret;
}
return 0;
}
static const struct pinconf_ops chv_pinconf_ops = {
.is_generic = true,
.pin_config_set = chv_config_set,
.pin_config_get = chv_config_get,
.pin_config_group_get = chv_config_group_get,
.pin_config_group_set = chv_config_group_set,
};
static struct pinctrl_desc chv_pinctrl_desc = {
.pctlops = &chv_pinctrl_ops,
.pmxops = &chv_pinmux_ops,
.confops = &chv_pinconf_ops,
.owner = THIS_MODULE,
};
static int chv_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct chv_pinctrl *pctrl = gpiochip_get_data(chip);
unsigned long flags;
u32 ctrl0, cfg;
raw_spin_lock_irqsave(&chv_lock, flags);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
ctrl0 = readl(chv_padreg(pctrl, offset, CHV_PADCTRL0));
raw_spin_unlock_irqrestore(&chv_lock, flags);
cfg = ctrl0 & CHV_PADCTRL0_GPIOCFG_MASK;
cfg >>= CHV_PADCTRL0_GPIOCFG_SHIFT;
if (cfg == CHV_PADCTRL0_GPIOCFG_GPO)
return !!(ctrl0 & CHV_PADCTRL0_GPIOTXSTATE);
return !!(ctrl0 & CHV_PADCTRL0_GPIORXSTATE);
}
static void chv_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
{
struct chv_pinctrl *pctrl = gpiochip_get_data(chip);
unsigned long flags;
void __iomem *reg;
u32 ctrl0;
raw_spin_lock_irqsave(&chv_lock, flags);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
reg = chv_padreg(pctrl, offset, CHV_PADCTRL0);
ctrl0 = readl(reg);
if (value)
ctrl0 |= CHV_PADCTRL0_GPIOTXSTATE;
else
ctrl0 &= ~CHV_PADCTRL0_GPIOTXSTATE;
chv_writel(ctrl0, reg);
raw_spin_unlock_irqrestore(&chv_lock, flags);
}
static int chv_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
{
struct chv_pinctrl *pctrl = gpiochip_get_data(chip);
u32 ctrl0, direction;
unsigned long flags;
raw_spin_lock_irqsave(&chv_lock, flags);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
ctrl0 = readl(chv_padreg(pctrl, offset, CHV_PADCTRL0));
raw_spin_unlock_irqrestore(&chv_lock, flags);
direction = ctrl0 & CHV_PADCTRL0_GPIOCFG_MASK;
direction >>= CHV_PADCTRL0_GPIOCFG_SHIFT;
return direction != CHV_PADCTRL0_GPIOCFG_GPO;
}
static int chv_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
{
return pinctrl_gpio_direction_input(chip->base + offset);
}
static int chv_gpio_direction_output(struct gpio_chip *chip, unsigned int offset,
int value)
{
chv_gpio_set(chip, offset, value);
return pinctrl_gpio_direction_output(chip->base + offset);
}
static const struct gpio_chip chv_gpio_chip = {
.owner = THIS_MODULE,
.request = gpiochip_generic_request,
.free = gpiochip_generic_free,
.get_direction = chv_gpio_get_direction,
.direction_input = chv_gpio_direction_input,
.direction_output = chv_gpio_direction_output,
.get = chv_gpio_get,
.set = chv_gpio_set,
};
static void chv_gpio_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
int pin = irqd_to_hwirq(d);
u32 intr_line;
raw_spin_lock(&chv_lock);
intr_line = readl(chv_padreg(pctrl, pin, CHV_PADCTRL0));
intr_line &= CHV_PADCTRL0_INTSEL_MASK;
intr_line >>= CHV_PADCTRL0_INTSEL_SHIFT;
chv_writel(BIT(intr_line), pctrl->regs + CHV_INTSTAT);
raw_spin_unlock(&chv_lock);
}
static void chv_gpio_irq_mask_unmask(struct irq_data *d, bool mask)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
int pin = irqd_to_hwirq(d);
u32 value, intr_line;
unsigned long flags;
raw_spin_lock_irqsave(&chv_lock, flags);
intr_line = readl(chv_padreg(pctrl, pin, CHV_PADCTRL0));
intr_line &= CHV_PADCTRL0_INTSEL_MASK;
intr_line >>= CHV_PADCTRL0_INTSEL_SHIFT;
value = readl(pctrl->regs + CHV_INTMASK);
if (mask)
value &= ~BIT(intr_line);
else
value |= BIT(intr_line);
chv_writel(value, pctrl->regs + CHV_INTMASK);
raw_spin_unlock_irqrestore(&chv_lock, flags);
}
static void chv_gpio_irq_mask(struct irq_data *d)
{
chv_gpio_irq_mask_unmask(d, true);
}
static void chv_gpio_irq_unmask(struct irq_data *d)
{
chv_gpio_irq_mask_unmask(d, false);
}
static unsigned chv_gpio_irq_startup(struct irq_data *d)
{
/*
* Check if the interrupt has been requested with 0 as triggering
* type. In that case it is assumed that the current values
* programmed to the hardware are used (e.g BIOS configured
* defaults).
*
* In that case ->irq_set_type() will never be called so we need to
* read back the values from hardware now, set correct flow handler
* and update mappings before the interrupt is being used.
*/
if (irqd_get_trigger_type(d) == IRQ_TYPE_NONE) {
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
unsigned int pin = irqd_to_hwirq(d);
irq_flow_handler_t handler;
unsigned long flags;
u32 intsel, value;
raw_spin_lock_irqsave(&chv_lock, flags);
intsel = readl(chv_padreg(pctrl, pin, CHV_PADCTRL0));
intsel &= CHV_PADCTRL0_INTSEL_MASK;
intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
value = readl(chv_padreg(pctrl, pin, CHV_PADCTRL1));
if (value & CHV_PADCTRL1_INTWAKECFG_LEVEL)
handler = handle_level_irq;
else
handler = handle_edge_irq;
if (!pctrl->intr_lines[intsel]) {
irq_set_handler_locked(d, handler);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
pctrl->intr_lines[intsel] = pin;
}
raw_spin_unlock_irqrestore(&chv_lock, flags);
}
chv_gpio_irq_unmask(d);
return 0;
}
static int chv_gpio_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
unsigned int pin = irqd_to_hwirq(d);
unsigned long flags;
u32 value;
raw_spin_lock_irqsave(&chv_lock, flags);
/*
* Pins which can be used as shared interrupt are configured in
* BIOS. Driver trusts BIOS configurations and assigns different
* handler according to the irq type.
*
* Driver needs to save the mapping between each pin and
* its interrupt line.
* 1. If the pin cfg is locked in BIOS:
* Trust BIOS has programmed IntWakeCfg bits correctly,
* driver just needs to save the mapping.
* 2. If the pin cfg is not locked in BIOS:
* Driver programs the IntWakeCfg bits and save the mapping.
*/
if (!chv_pad_locked(pctrl, pin)) {
void __iomem *reg = chv_padreg(pctrl, pin, CHV_PADCTRL1);
value = readl(reg);
value &= ~CHV_PADCTRL1_INTWAKECFG_MASK;
value &= ~CHV_PADCTRL1_INVRXTX_MASK;
if (type & IRQ_TYPE_EDGE_BOTH) {
if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
value |= CHV_PADCTRL1_INTWAKECFG_BOTH;
else if (type & IRQ_TYPE_EDGE_RISING)
value |= CHV_PADCTRL1_INTWAKECFG_RISING;
else if (type & IRQ_TYPE_EDGE_FALLING)
value |= CHV_PADCTRL1_INTWAKECFG_FALLING;
} else if (type & IRQ_TYPE_LEVEL_MASK) {
value |= CHV_PADCTRL1_INTWAKECFG_LEVEL;
if (type & IRQ_TYPE_LEVEL_LOW)
value |= CHV_PADCTRL1_INVRXTX_RXDATA;
}
chv_writel(value, reg);
}
value = readl(chv_padreg(pctrl, pin, CHV_PADCTRL0));
value &= CHV_PADCTRL0_INTSEL_MASK;
value >>= CHV_PADCTRL0_INTSEL_SHIFT;
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
pctrl->intr_lines[value] = pin;
if (type & IRQ_TYPE_EDGE_BOTH)
irq_set_handler_locked(d, handle_edge_irq);
else if (type & IRQ_TYPE_LEVEL_MASK)
irq_set_handler_locked(d, handle_level_irq);
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
static struct irq_chip chv_gpio_irqchip = {
.name = "chv-gpio",
.irq_startup = chv_gpio_irq_startup,
.irq_ack = chv_gpio_irq_ack,
.irq_mask = chv_gpio_irq_mask,
.irq_unmask = chv_gpio_irq_unmask,
.irq_set_type = chv_gpio_irq_type,
.flags = IRQCHIP_SKIP_SET_WAKE,
};
static void chv_gpio_irq_handler(struct irq_desc *desc)
{
struct gpio_chip *gc = irq_desc_get_handler_data(desc);
struct chv_pinctrl *pctrl = gpiochip_get_data(gc);
struct irq_chip *chip = irq_desc_get_chip(desc);
unsigned long pending;
u32 intr_line;
chained_irq_enter(chip, desc);
pending = readl(pctrl->regs + CHV_INTSTAT);
for_each_set_bit(intr_line, &pending, pctrl->community->nirqs) {
unsigned irq, offset;
offset = pctrl->intr_lines[intr_line];
irq = irq_find_mapping(gc->irq.domain, offset);
generic_handle_irq(irq);
}
chained_irq_exit(chip, desc);
}
/*
* Certain machines seem to hardcode Linux IRQ numbers in their ACPI
* tables. Since we leave GPIOs that are not capable of generating
* interrupts out of the irqdomain the numbering will be different and
* cause devices using the hardcoded IRQ numbers fail. In order not to
* break such machines we will only mask pins from irqdomain if the machine
* is not listed below.
*/
static const struct dmi_system_id chv_no_valid_mask[] = {
/* See https://bugzilla.kernel.org/show_bug.cgi?id=194945 */
{
.ident = "Intel_Strago based Chromebooks (All models)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"),
DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
},
},
{
.ident = "HP Chromebook 11 G5 (Setzer)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
},
},
{
.ident = "Acer Chromebook R11 (Cyan)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"),
DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
},
},
{
.ident = "Samsung Chromebook 3 (Celes)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
DMI_MATCH(DMI_PRODUCT_NAME, "Celes"),
DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
},
},
{}
};
static void chv_init_irq_valid_mask(struct gpio_chip *chip,
unsigned long *valid_mask,
unsigned int ngpios)
{
struct chv_pinctrl *pctrl = gpiochip_get_data(chip);
const struct chv_community *community = pctrl->community;
int i;
/* Do not add GPIOs that can only generate GPEs to the IRQ domain */
for (i = 0; i < community->npins; i++) {
const struct pinctrl_pin_desc *desc;
u32 intsel;
desc = &community->pins[i];
intsel = readl(chv_padreg(pctrl, desc->number, CHV_PADCTRL0));
intsel &= CHV_PADCTRL0_INTSEL_MASK;
intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
if (intsel >= community->nirqs)
clear_bit(i, valid_mask);
}
}
static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
{
const struct chv_gpio_pinrange *range;
struct gpio_chip *chip = &pctrl->chip;
bool need_valid_mask = !dmi_check_system(chv_no_valid_mask);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
const struct chv_community *community = pctrl->community;
int ret, i, irq_base;
*chip = chv_gpio_chip;
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
chip->ngpio = community->pins[community->npins - 1].number + 1;
chip->label = dev_name(pctrl->dev);
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 01:56:26 -07:00
chip->parent = pctrl->dev;
chip->base = -1;
if (need_valid_mask)
chip->irq.init_valid_mask = chv_init_irq_valid_mask;
ret = devm_gpiochip_add_data(pctrl->dev, chip, pctrl);
if (ret) {
dev_err(pctrl->dev, "Failed to register gpiochip\n");
return ret;
}
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 06:54:42 -07:00
for (i = 0; i < community->ngpio_ranges; i++) {
range = &community->gpio_ranges[i];
ret = gpiochip_add_pin_range(chip, dev_name(pctrl->dev),
range->base, range->base,
range->npins);
if (ret) {
dev_err(pctrl->dev, "failed to add GPIO pin range\n");
return ret;
}
}
/*
* The same set of machines in chv_no_valid_mask[] have incorrectly
* configured GPIOs that generate spurious interrupts so we use
* this same list to apply another quirk for them.
*
* See also https://bugzilla.kernel.org/show_bug.cgi?id=197953.
*/
if (!need_valid_mask) {
/*
* Mask all interrupts the community is able to generate
* but leave the ones that can only generate GPEs unmasked.
*/
chv_writel(GENMASK(31, pctrl->community->nirqs),
pctrl->regs + CHV_INTMASK);
}
/* Clear all interrupts */
chv_writel(0xffff, pctrl->regs + CHV_INTSTAT);
if (!need_valid_mask) {
irq_base = devm_irq_alloc_descs(pctrl->dev, -1, 0,
community->npins, NUMA_NO_NODE);
if (irq_base < 0) {
dev_err(pctrl->dev, "Failed to allocate IRQ numbers\n");
return irq_base;
}
}
ret = gpiochip_irqchip_add(chip, &chv_gpio_irqchip, 0,
handle_bad_irq, IRQ_TYPE_NONE);
if (ret) {
dev_err(pctrl->dev, "failed to add IRQ chip\n");
return ret;
}
if (!need_valid_mask) {
for (i = 0; i < community->ngpio_ranges; i++) {
range = &community->gpio_ranges[i];
irq_domain_associate_many(chip->irq.domain, irq_base,
range->base, range->npins);
irq_base += range->npins;
}
}
gpiochip_set_chained_irqchip(chip, &chv_gpio_irqchip, irq,
chv_gpio_irq_handler);
return 0;
}
static acpi_status chv_pinctrl_mmio_access_handler(u32 function,
acpi_physical_address address, u32 bits, u64 *value,
void *handler_context, void *region_context)
{
struct chv_pinctrl *pctrl = region_context;
unsigned long flags;
acpi_status ret = AE_OK;
raw_spin_lock_irqsave(&chv_lock, flags);
if (function == ACPI_WRITE)
chv_writel((u32)(*value), pctrl->regs + (u32)address);
else if (function == ACPI_READ)
*value = readl(pctrl->regs + (u32)address);
else
ret = AE_BAD_PARAMETER;
raw_spin_unlock_irqrestore(&chv_lock, flags);
return ret;
}
static int chv_pinctrl_probe(struct platform_device *pdev)
{
struct chv_pinctrl *pctrl;
struct acpi_device *adev;
struct resource *res;
acpi_status status;
int ret, irq, i;
adev = ACPI_COMPANION(&pdev->dev);
if (!adev)
return -ENODEV;
pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
if (!pctrl)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(chv_communities); i++)
if (!strcmp(adev->pnp.unique_id, chv_communities[i]->uid)) {
pctrl->community = chv_communities[i];
break;
}
if (i == ARRAY_SIZE(chv_communities))
return -ENODEV;
pctrl->dev = &pdev->dev;
#ifdef CONFIG_PM_SLEEP
pctrl->saved_pin_context = devm_kcalloc(pctrl->dev,
pctrl->community->npins, sizeof(*pctrl->saved_pin_context),
GFP_KERNEL);
if (!pctrl->saved_pin_context)
return -ENOMEM;
#endif
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pctrl->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(pctrl->regs))
return PTR_ERR(pctrl->regs);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get interrupt number\n");
return irq;
}
pctrl->pctldesc = chv_pinctrl_desc;
pctrl->pctldesc.name = dev_name(&pdev->dev);
pctrl->pctldesc.pins = pctrl->community->pins;
pctrl->pctldesc.npins = pctrl->community->npins;
pctrl->pctldev = devm_pinctrl_register(&pdev->dev, &pctrl->pctldesc,
pctrl);
if (IS_ERR(pctrl->pctldev)) {
dev_err(&pdev->dev, "failed to register pinctrl driver\n");
return PTR_ERR(pctrl->pctldev);
}
ret = chv_gpio_probe(pctrl, irq);
if (ret)
return ret;
status = acpi_install_address_space_handler(adev->handle,
pctrl->community->acpi_space_id,
chv_pinctrl_mmio_access_handler,
NULL, pctrl);
if (ACPI_FAILURE(status))
dev_err(&pdev->dev, "failed to install ACPI addr space handler\n");
platform_set_drvdata(pdev, pctrl);
return 0;
}
static int chv_pinctrl_remove(struct platform_device *pdev)
{
struct chv_pinctrl *pctrl = platform_get_drvdata(pdev);
acpi_remove_address_space_handler(ACPI_COMPANION(&pdev->dev),
pctrl->community->acpi_space_id,
chv_pinctrl_mmio_access_handler);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int chv_pinctrl_suspend_noirq(struct device *dev)
{
struct chv_pinctrl *pctrl = dev_get_drvdata(dev);
unsigned long flags;
int i;
raw_spin_lock_irqsave(&chv_lock, flags);
pctrl->saved_intmask = readl(pctrl->regs + CHV_INTMASK);
for (i = 0; i < pctrl->community->npins; i++) {
const struct pinctrl_pin_desc *desc;
struct chv_pin_context *ctx;
void __iomem *reg;
desc = &pctrl->community->pins[i];
if (chv_pad_locked(pctrl, desc->number))
continue;
ctx = &pctrl->saved_pin_context[i];
reg = chv_padreg(pctrl, desc->number, CHV_PADCTRL0);
ctx->padctrl0 = readl(reg) & ~CHV_PADCTRL0_GPIORXSTATE;
reg = chv_padreg(pctrl, desc->number, CHV_PADCTRL1);
ctx->padctrl1 = readl(reg);
}
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
static int chv_pinctrl_resume_noirq(struct device *dev)
{
struct chv_pinctrl *pctrl = dev_get_drvdata(dev);
unsigned long flags;
int i;
raw_spin_lock_irqsave(&chv_lock, flags);
/*
* Mask all interrupts before restoring per-pin configuration
* registers because we don't know in which state BIOS left them
* upon exiting suspend.
*/
chv_writel(0, pctrl->regs + CHV_INTMASK);
for (i = 0; i < pctrl->community->npins; i++) {
const struct pinctrl_pin_desc *desc;
const struct chv_pin_context *ctx;
void __iomem *reg;
u32 val;
desc = &pctrl->community->pins[i];
if (chv_pad_locked(pctrl, desc->number))
continue;
ctx = &pctrl->saved_pin_context[i];
/* Only restore if our saved state differs from the current */
reg = chv_padreg(pctrl, desc->number, CHV_PADCTRL0);
val = readl(reg) & ~CHV_PADCTRL0_GPIORXSTATE;
if (ctx->padctrl0 != val) {
chv_writel(ctx->padctrl0, reg);
dev_dbg(pctrl->dev, "restored pin %2u ctrl0 0x%08x\n",
desc->number, readl(reg));
}
reg = chv_padreg(pctrl, desc->number, CHV_PADCTRL1);
val = readl(reg);
if (ctx->padctrl1 != val) {
chv_writel(ctx->padctrl1, reg);
dev_dbg(pctrl->dev, "restored pin %2u ctrl1 0x%08x\n",
desc->number, readl(reg));
}
}
/*
* Now that all pins are restored to known state, we can restore
* the interrupt mask register as well.
*/
chv_writel(0xffff, pctrl->regs + CHV_INTSTAT);
chv_writel(pctrl->saved_intmask, pctrl->regs + CHV_INTMASK);
raw_spin_unlock_irqrestore(&chv_lock, flags);
return 0;
}
#endif
static const struct dev_pm_ops chv_pinctrl_pm_ops = {
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(chv_pinctrl_suspend_noirq,
chv_pinctrl_resume_noirq)
};
static const struct acpi_device_id chv_pinctrl_acpi_match[] = {
{ "INT33FF" },
{ }
};
MODULE_DEVICE_TABLE(acpi, chv_pinctrl_acpi_match);
static struct platform_driver chv_pinctrl_driver = {
.probe = chv_pinctrl_probe,
.remove = chv_pinctrl_remove,
.driver = {
.name = "cherryview-pinctrl",
.pm = &chv_pinctrl_pm_ops,
.acpi_match_table = chv_pinctrl_acpi_match,
},
};
static int __init chv_pinctrl_init(void)
{
return platform_driver_register(&chv_pinctrl_driver);
}
subsys_initcall(chv_pinctrl_init);
static void __exit chv_pinctrl_exit(void)
{
platform_driver_unregister(&chv_pinctrl_driver);
}
module_exit(chv_pinctrl_exit);
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
MODULE_DESCRIPTION("Intel Cherryview/Braswell pinctrl driver");
MODULE_LICENSE("GPL v2");