1
0
Fork 0
alistair23-linux/net/mac80211/wext.c

1262 lines
32 KiB
C
Raw Normal View History

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <asm/uaccess.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "led.h"
#include "rate.h"
#include "wpa.h"
#include "aes_ccm.h"
static int ieee80211_set_encryption(struct ieee80211_sub_if_data *sdata, u8 *sta_addr,
int idx, int alg, int remove,
int set_tx_key, const u8 *_key,
size_t key_len)
{
struct ieee80211_local *local = sdata->local;
struct sta_info *sta;
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 15:01:55 -06:00
struct ieee80211_key *key;
int err;
if (idx < 0 || idx >= NUM_DEFAULT_KEYS) {
printk(KERN_DEBUG "%s: set_encrypt - invalid idx=%d\n",
sdata->dev->name, idx);
return -EINVAL;
}
if (remove) {
rcu_read_lock();
err = 0;
if (is_broadcast_ether_addr(sta_addr)) {
key = sdata->keys[idx];
} else {
sta = sta_info_get(local, sta_addr);
if (!sta) {
err = -ENOENT;
goto out_unlock;
}
key = sta->key;
}
ieee80211_key_free(key);
} else {
key = ieee80211_key_alloc(alg, idx, key_len, _key);
if (!key)
return -ENOMEM;
sta = NULL;
err = 0;
rcu_read_lock();
if (!is_broadcast_ether_addr(sta_addr)) {
set_tx_key = 0;
/*
* According to the standard, the key index of a
* pairwise key must be zero. However, some AP are
* broken when it comes to WEP key indices, so we
* work around this.
*/
if (idx != 0 && alg != ALG_WEP) {
ieee80211_key_free(key);
err = -EINVAL;
goto out_unlock;
}
sta = sta_info_get(local, sta_addr);
if (!sta) {
ieee80211_key_free(key);
err = -ENOENT;
goto out_unlock;
}
}
if (alg == ALG_WEP &&
key_len != LEN_WEP40 && key_len != LEN_WEP104) {
ieee80211_key_free(key);
err = -EINVAL;
goto out_unlock;
}
ieee80211_key_link(key, sdata, sta);
if (set_tx_key || (!sta && !sdata->default_key && key))
ieee80211_set_default_key(sdata, idx);
}
out_unlock:
rcu_read_unlock();
return err;
}
static int ieee80211_ioctl_siwgenie(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME)
return -EOPNOTSUPP;
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
int ret = ieee80211_sta_set_extra_ie(sdata, extra, data->length);
if (ret)
return ret;
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
ieee80211_sta_req_auth(sdata, &sdata->u.sta);
return 0;
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_giwname(struct net_device *dev,
struct iw_request_info *info,
char *name, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_supported_band *sband;
u8 is_ht = 0, is_a = 0, is_b = 0, is_g = 0;
sband = local->hw.wiphy->bands[IEEE80211_BAND_5GHZ];
if (sband) {
is_a = 1;
is_ht |= sband->ht_info.ht_supported;
}
sband = local->hw.wiphy->bands[IEEE80211_BAND_2GHZ];
if (sband) {
int i;
/* Check for mandatory rates */
for (i = 0; i < sband->n_bitrates; i++) {
if (sband->bitrates[i].bitrate == 10)
is_b = 1;
if (sband->bitrates[i].bitrate == 60)
is_g = 1;
}
is_ht |= sband->ht_info.ht_supported;
}
strcpy(name, "IEEE 802.11");
if (is_a)
strcat(name, "a");
if (is_b)
strcat(name, "b");
if (is_g)
strcat(name, "g");
if (is_ht)
strcat(name, "n");
return 0;
}
static int ieee80211_ioctl_giwrange(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct iw_range *range = (struct iw_range *) extra;
enum ieee80211_band band;
int c = 0;
data->length = sizeof(struct iw_range);
memset(range, 0, sizeof(struct iw_range));
range->we_version_compiled = WIRELESS_EXT;
range->we_version_source = 21;
range->retry_capa = IW_RETRY_LIMIT;
range->retry_flags = IW_RETRY_LIMIT;
range->min_retry = 0;
range->max_retry = 255;
range->min_rts = 0;
range->max_rts = 2347;
range->min_frag = 256;
range->max_frag = 2346;
range->encoding_size[0] = 5;
range->encoding_size[1] = 13;
range->num_encoding_sizes = 2;
range->max_encoding_tokens = NUM_DEFAULT_KEYS;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 11:15:40 -06:00
if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC ||
local->hw.flags & IEEE80211_HW_SIGNAL_DB)
range->max_qual.level = local->hw.max_signal;
else if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
range->max_qual.level = -110;
else
range->max_qual.level = 0;
if (local->hw.flags & IEEE80211_HW_NOISE_DBM)
range->max_qual.noise = -110;
else
range->max_qual.noise = 0;
range->max_qual.qual = 100;
range->max_qual.updated = local->wstats_flags;
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 11:15:40 -06:00
range->avg_qual.qual = 50;
/* not always true but better than nothing */
range->avg_qual.level = range->max_qual.level / 2;
range->avg_qual.noise = range->max_qual.noise / 2;
range->avg_qual.updated = local->wstats_flags;
range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
for (band = 0; band < IEEE80211_NUM_BANDS; band ++) {
int i;
struct ieee80211_supported_band *sband;
sband = local->hw.wiphy->bands[band];
if (!sband)
continue;
for (i = 0; i < sband->n_channels && c < IW_MAX_FREQUENCIES; i++) {
struct ieee80211_channel *chan = &sband->channels[i];
if (!(chan->flags & IEEE80211_CHAN_DISABLED)) {
range->freq[c].i =
ieee80211_frequency_to_channel(
chan->center_freq);
range->freq[c].m = chan->center_freq;
range->freq[c].e = 6;
c++;
}
}
}
range->num_channels = c;
range->num_frequency = c;
IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
range->scan_capa |= IW_SCAN_CAPA_ESSID;
return 0;
}
static int ieee80211_ioctl_siwmode(struct net_device *dev,
struct iw_request_info *info,
__u32 *mode, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int type;
if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN)
return -EOPNOTSUPP;
switch (*mode) {
case IW_MODE_INFRA:
type = IEEE80211_IF_TYPE_STA;
break;
case IW_MODE_ADHOC:
type = IEEE80211_IF_TYPE_IBSS;
break;
case IW_MODE_REPEAT:
type = IEEE80211_IF_TYPE_WDS;
break;
case IW_MODE_MONITOR:
type = IEEE80211_IF_TYPE_MNTR;
break;
default:
return -EINVAL;
}
return ieee80211_if_change_type(sdata, type);
}
static int ieee80211_ioctl_giwmode(struct net_device *dev,
struct iw_request_info *info,
__u32 *mode, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (sdata->vif.type) {
case IEEE80211_IF_TYPE_AP:
*mode = IW_MODE_MASTER;
break;
case IEEE80211_IF_TYPE_STA:
*mode = IW_MODE_INFRA;
break;
case IEEE80211_IF_TYPE_IBSS:
*mode = IW_MODE_ADHOC;
break;
case IEEE80211_IF_TYPE_MNTR:
*mode = IW_MODE_MONITOR;
break;
case IEEE80211_IF_TYPE_WDS:
*mode = IW_MODE_REPEAT;
break;
case IEEE80211_IF_TYPE_VLAN:
*mode = IW_MODE_SECOND; /* FIXME */
break;
default:
*mode = IW_MODE_AUTO;
break;
}
return 0;
}
int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz)
{
int ret = -EINVAL;
struct ieee80211_channel *chan;
struct ieee80211_local *local = sdata->local;
chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
chan->flags & IEEE80211_CHAN_NO_IBSS) {
printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
"%d MHz\n", sdata->dev->name, chan->center_freq);
return ret;
}
local->oper_channel = chan;
if (local->sta_sw_scanning || local->sta_hw_scanning)
ret = 0;
else
ret = ieee80211_hw_config(local);
rate_control_clear(local);
}
return ret;
}
static int ieee80211_ioctl_siwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA)
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_CHANNEL_SEL;
/* freq->e == 0: freq->m = channel; otherwise freq = m * 10^e */
if (freq->e == 0) {
if (freq->m < 0) {
if (sdata->vif.type == IEEE80211_IF_TYPE_STA)
sdata->u.sta.flags |=
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
return ieee80211_set_freq(sdata,
ieee80211_channel_to_frequency(freq->m));
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
if (div > 0)
return ieee80211_set_freq(sdata, freq->m / div);
else
return -EINVAL;
}
}
static int ieee80211_ioctl_giwfreq(struct net_device *dev,
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
freq->m = local->hw.conf.channel->center_freq;
freq->e = 6;
return 0;
}
static int ieee80211_ioctl_siwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
struct ieee80211_sub_if_data *sdata;
size_t len = data->length;
/* iwconfig uses nul termination in SSID.. */
if (len > 0 && ssid[len - 1] == '\0')
len--;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
int ret;
if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME) {
if (len > IEEE80211_MAX_SSID_LEN)
return -EINVAL;
memcpy(sdata->u.sta.ssid, ssid, len);
sdata->u.sta.ssid_len = len;
return 0;
}
if (data->flags)
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_SSID_SEL;
else
sdata->u.sta.flags |= IEEE80211_STA_AUTO_SSID_SEL;
ret = ieee80211_sta_set_ssid(sdata, ssid, len);
if (ret)
return ret;
ieee80211_sta_req_auth(sdata, &sdata->u.sta);
return 0;
}
if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
memcpy(sdata->u.ap.ssid, ssid, len);
memset(sdata->u.ap.ssid + len, 0,
IEEE80211_MAX_SSID_LEN - len);
sdata->u.ap.ssid_len = len;
return ieee80211_if_config(sdata, IEEE80211_IFCC_SSID);
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_giwessid(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *ssid)
{
size_t len;
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
int res = ieee80211_sta_get_ssid(sdata, ssid, &len);
if (res == 0) {
data->length = len;
data->flags = 1;
} else
data->flags = 0;
return res;
}
if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
len = sdata->u.ap.ssid_len;
if (len > IW_ESSID_MAX_SIZE)
len = IW_ESSID_MAX_SIZE;
memcpy(ssid, sdata->u.ap.ssid, len);
data->length = len;
data->flags = 1;
return 0;
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_siwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
int ret;
if (sdata->flags & IEEE80211_SDATA_USERSPACE_MLME) {
memcpy(sdata->u.sta.bssid, (u8 *) &ap_addr->sa_data,
ETH_ALEN);
return 0;
}
if (is_zero_ether_addr((u8 *) &ap_addr->sa_data))
sdata->u.sta.flags |= IEEE80211_STA_AUTO_BSSID_SEL |
IEEE80211_STA_AUTO_CHANNEL_SEL;
else if (is_broadcast_ether_addr((u8 *) &ap_addr->sa_data))
sdata->u.sta.flags |= IEEE80211_STA_AUTO_BSSID_SEL;
else
sdata->u.sta.flags &= ~IEEE80211_STA_AUTO_BSSID_SEL;
ret = ieee80211_sta_set_bssid(sdata, (u8 *) &ap_addr->sa_data);
if (ret)
return ret;
ieee80211_sta_req_auth(sdata, &sdata->u.sta);
return 0;
} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
/*
* If it is necessary to update the WDS peer address
* while the interface is running, then we need to do
* more work here, namely if it is running we need to
* add a new and remove the old STA entry, this is
* normally handled by _open() and _stop().
*/
if (netif_running(dev))
return -EBUSY;
memcpy(&sdata->u.wds.remote_addr, (u8 *) &ap_addr->sa_data,
ETH_ALEN);
return 0;
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_giwap(struct net_device *dev,
struct iw_request_info *info,
struct sockaddr *ap_addr, char *extra)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
if (sdata->u.sta.state == IEEE80211_STA_MLME_ASSOCIATED ||
sdata->u.sta.state == IEEE80211_STA_MLME_IBSS_JOINED) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
return 0;
} else {
memset(&ap_addr->sa_data, 0, ETH_ALEN);
return 0;
}
} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
return 0;
}
return -EOPNOTSUPP;
}
static int ieee80211_ioctl_siwscan(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct iw_scan_req *req = NULL;
u8 *ssid = NULL;
size_t ssid_len = 0;
if (!netif_running(dev))
return -ENETDOWN;
if (sdata->vif.type != IEEE80211_IF_TYPE_STA &&
sdata->vif.type != IEEE80211_IF_TYPE_IBSS &&
sdata->vif.type != IEEE80211_IF_TYPE_MESH_POINT &&
sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EOPNOTSUPP;
/* if SSID was specified explicitly then use that */
if (wrqu->data.length == sizeof(struct iw_scan_req) &&
wrqu->data.flags & IW_SCAN_THIS_ESSID) {
req = (struct iw_scan_req *)extra;
ssid = req->essid;
ssid_len = req->essid_len;
}
return ieee80211_sta_req_scan(sdata, ssid, ssid_len);
}
static int ieee80211_ioctl_giwscan(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
int res;
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
mac80211: hardware scan rework The scan code in mac80211 makes the software scan assumption in various places. For example, we stop the Tx queue during a software scan so that all the Tx packets will be queued by the stack. We also drop frames not related to scan in the software scan process. But these are not true for hardware scan. Some wireless hardwares (for example iwl3945/4965) has the ability to perform the whole scan process by hardware and/or firmware. The hardware scan is relative powerful in that it tries to maintain normal network traffic while doing a scan in the background. Some drivers (i.e iwlwifi) do provide a way to tune the hardware scan parameters (for example if the STA is associated, what's the max time could the STA leave from the associated channel, how long the scans get suspended after returning to the service channel, etc). But basically this is transparent to the stack. mac80211 should not stop Tx queues or drop Rx packets during a hardware scan. This patch resolves the above problem by spliting the current scan indicator local->sta_scanning into local->sta_sw_scanning and local->sta_hw_scanning. It then changes the scan related code to be aware of hardware scan or software scan in various places. With this patch, iwlwifi performs much better in the scan-while-associated condition and disable_hw_scan=1 should never be required. Cc: Mohamed Abbas <mohamed.abbas@intel.com> Cc: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-21 19:53:21 -07:00
if (local->sta_sw_scanning || local->sta_hw_scanning)
return -EAGAIN;
mac80211: hardware scan rework The scan code in mac80211 makes the software scan assumption in various places. For example, we stop the Tx queue during a software scan so that all the Tx packets will be queued by the stack. We also drop frames not related to scan in the software scan process. But these are not true for hardware scan. Some wireless hardwares (for example iwl3945/4965) has the ability to perform the whole scan process by hardware and/or firmware. The hardware scan is relative powerful in that it tries to maintain normal network traffic while doing a scan in the background. Some drivers (i.e iwlwifi) do provide a way to tune the hardware scan parameters (for example if the STA is associated, what's the max time could the STA leave from the associated channel, how long the scans get suspended after returning to the service channel, etc). But basically this is transparent to the stack. mac80211 should not stop Tx queues or drop Rx packets during a hardware scan. This patch resolves the above problem by spliting the current scan indicator local->sta_scanning into local->sta_sw_scanning and local->sta_hw_scanning. It then changes the scan related code to be aware of hardware scan or software scan in various places. With this patch, iwlwifi performs much better in the scan-while-associated condition and disable_hw_scan=1 should never be required. Cc: Mohamed Abbas <mohamed.abbas@intel.com> Cc: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-21 19:53:21 -07:00
res = ieee80211_sta_scan_results(local, info, extra, data->length);
if (res >= 0) {
data->length = res;
return 0;
}
data->length = 0;
return res;
}
static int ieee80211_ioctl_siwrate(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rate, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i, err = -EINVAL;
u32 target_rate = rate->value / 100000;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
/* target_rate = -1, rate->fixed = 0 means auto only, so use all rates
* target_rate = X, rate->fixed = 1 means only rate X
* target_rate = X, rate->fixed = 0 means all rates <= X */
sdata->max_ratectrl_rateidx = -1;
sdata->force_unicast_rateidx = -1;
if (rate->value < 0)
return 0;
for (i=0; i< sband->n_bitrates; i++) {
struct ieee80211_rate *brate = &sband->bitrates[i];
int this_rate = brate->bitrate;
if (target_rate == this_rate) {
sdata->max_ratectrl_rateidx = i;
if (rate->fixed)
sdata->force_unicast_rateidx = i;
err = 0;
break;
}
}
return err;
}
static int ieee80211_ioctl_giwrate(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rate, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
return -EOPNOTSUPP;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
rcu_read_lock();
sta = sta_info_get(local, sdata->u.sta.bssid);
if (sta && sta->txrate_idx < sband->n_bitrates)
rate->value = sband->bitrates[sta->txrate_idx].bitrate;
else
rate->value = 0;
rcu_read_unlock();
if (!sta)
return -ENODEV;
rate->value *= 100000;
return 0;
}
static int ieee80211_ioctl_siwtxpower(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
bool need_reconfig = 0;
int new_power_level;
if ((data->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
return -EINVAL;
if (data->txpower.flags & IW_TXPOW_RANGE)
return -EINVAL;
if (data->txpower.fixed) {
new_power_level = data->txpower.value;
} else {
/*
* Automatic power level. Use maximum power for the current
* channel. Should be part of rate control.
*/
struct ieee80211_channel* chan = local->hw.conf.channel;
if (!chan)
return -EINVAL;
new_power_level = chan->max_power;
}
if (local->hw.conf.power_level != new_power_level) {
local->hw.conf.power_level = new_power_level;
need_reconfig = 1;
}
if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) {
local->hw.conf.radio_enabled = !(data->txpower.disabled);
need_reconfig = 1;
ieee80211_led_radio(local, local->hw.conf.radio_enabled);
}
if (need_reconfig) {
ieee80211_hw_config(local);
/* The return value of hw_config is not of big interest here,
* as it doesn't say that it failed because of _this_ config
* change or something else. Ignore it. */
}
return 0;
}
static int ieee80211_ioctl_giwtxpower(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *data, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
data->txpower.fixed = 1;
data->txpower.disabled = !(local->hw.conf.radio_enabled);
data->txpower.value = local->hw.conf.power_level;
data->txpower.flags = IW_TXPOW_DBM;
return 0;
}
static int ieee80211_ioctl_siwrts(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rts, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (rts->disabled)
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
else if (!rts->fixed)
/* if the rts value is not fixed, then take default */
local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
else if (rts->value < 0 || rts->value > IEEE80211_MAX_RTS_THRESHOLD)
return -EINVAL;
else
local->rts_threshold = rts->value;
/* If the wlan card performs RTS/CTS in hardware/firmware,
* configure it here */
if (local->ops->set_rts_threshold)
local->ops->set_rts_threshold(local_to_hw(local),
local->rts_threshold);
return 0;
}
static int ieee80211_ioctl_giwrts(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rts, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
rts->value = local->rts_threshold;
rts->disabled = (rts->value >= IEEE80211_MAX_RTS_THRESHOLD);
rts->fixed = 1;
return 0;
}
static int ieee80211_ioctl_siwfrag(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *frag, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (frag->disabled)
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
else if (!frag->fixed)
local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
else if (frag->value < 256 ||
frag->value > IEEE80211_MAX_FRAG_THRESHOLD)
return -EINVAL;
else {
/* Fragment length must be even, so strip LSB. */
local->fragmentation_threshold = frag->value & ~0x1;
}
/* If the wlan card performs fragmentation in hardware/firmware,
* configure it here */
if (local->ops->set_frag_threshold)
local->ops->set_frag_threshold(
local_to_hw(local),
local->fragmentation_threshold);
return 0;
}
static int ieee80211_ioctl_giwfrag(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *frag, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
frag->value = local->fragmentation_threshold;
frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD);
frag->fixed = 1;
return 0;
}
static int ieee80211_ioctl_siwretry(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *retry, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (retry->disabled ||
(retry->flags & IW_RETRY_TYPE) != IW_RETRY_LIMIT)
return -EINVAL;
if (retry->flags & IW_RETRY_MAX)
local->long_retry_limit = retry->value;
else if (retry->flags & IW_RETRY_MIN)
local->short_retry_limit = retry->value;
else {
local->long_retry_limit = retry->value;
local->short_retry_limit = retry->value;
}
if (local->ops->set_retry_limit) {
return local->ops->set_retry_limit(
local_to_hw(local),
local->short_retry_limit,
local->long_retry_limit);
}
return 0;
}
static int ieee80211_ioctl_giwretry(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *retry, char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
retry->disabled = 0;
if (retry->flags == 0 || retry->flags & IW_RETRY_MIN) {
/* first return min value, iwconfig will ask max value
* later if needed */
retry->flags |= IW_RETRY_LIMIT;
retry->value = local->short_retry_limit;
if (local->long_retry_limit != local->short_retry_limit)
retry->flags |= IW_RETRY_MIN;
return 0;
}
if (retry->flags & IW_RETRY_MAX) {
retry->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
retry->value = local->long_retry_limit;
}
return 0;
}
static int ieee80211_ioctl_siwmlme(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct ieee80211_sub_if_data *sdata;
struct iw_mlme *mlme = (struct iw_mlme *) extra;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type != IEEE80211_IF_TYPE_STA &&
sdata->vif.type != IEEE80211_IF_TYPE_IBSS)
return -EINVAL;
switch (mlme->cmd) {
case IW_MLME_DEAUTH:
/* TODO: mlme->addr.sa_data */
return ieee80211_sta_deauthenticate(sdata, mlme->reason_code);
case IW_MLME_DISASSOC:
/* TODO: mlme->addr.sa_data */
return ieee80211_sta_disassociate(sdata, mlme->reason_code);
default:
return -EOPNOTSUPP;
}
}
static int ieee80211_ioctl_siwencode(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq, char *keybuf)
{
struct ieee80211_sub_if_data *sdata;
int idx, i, alg = ALG_WEP;
u8 bcaddr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
int remove = 0;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
idx = erq->flags & IW_ENCODE_INDEX;
if (idx == 0) {
if (sdata->default_key)
for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
if (sdata->default_key == sdata->keys[i]) {
idx = i;
break;
}
}
} else if (idx < 1 || idx > 4)
return -EINVAL;
else
idx--;
if (erq->flags & IW_ENCODE_DISABLED)
remove = 1;
else if (erq->length == 0) {
/* No key data - just set the default TX key index */
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 15:01:55 -06:00
ieee80211_set_default_key(sdata, idx);
return 0;
}
return ieee80211_set_encryption(
sdata, bcaddr,
idx, alg, remove,
!sdata->default_key,
keybuf, erq->length);
}
static int ieee80211_ioctl_giwencode(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq, char *key)
{
struct ieee80211_sub_if_data *sdata;
int idx, i;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
idx = erq->flags & IW_ENCODE_INDEX;
if (idx < 1 || idx > 4) {
idx = -1;
if (!sdata->default_key)
idx = 0;
else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
if (sdata->default_key == sdata->keys[i]) {
idx = i;
break;
}
}
if (idx < 0)
return -EINVAL;
} else
idx--;
erq->flags = idx + 1;
if (!sdata->keys[idx]) {
erq->length = 0;
erq->flags |= IW_ENCODE_DISABLED;
return 0;
}
memcpy(key, sdata->keys[idx]->conf.key,
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 15:01:55 -06:00
min_t(int, erq->length, sdata->keys[idx]->conf.keylen));
erq->length = sdata->keys[idx]->conf.keylen;
erq->flags |= IW_ENCODE_ENABLED;
if (sdata->vif.type == IEEE80211_IF_TYPE_STA) {
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
switch (ifsta->auth_alg) {
case WLAN_AUTH_OPEN:
case WLAN_AUTH_LEAP:
erq->flags |= IW_ENCODE_OPEN;
break;
case WLAN_AUTH_SHARED_KEY:
erq->flags |= IW_ENCODE_RESTRICTED;
break;
}
}
return 0;
}
static int ieee80211_ioctl_siwpower(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *wrq,
char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_conf *conf = &local->hw.conf;
if (wrq->disabled) {
conf->flags &= ~IEEE80211_CONF_PS;
return ieee80211_hw_config(local);
}
switch (wrq->flags & IW_POWER_MODE) {
case IW_POWER_ON: /* If not specified */
case IW_POWER_MODE: /* If set all mask */
case IW_POWER_ALL_R: /* If explicitely state all */
conf->flags |= IEEE80211_CONF_PS;
break;
default: /* Otherwise we don't support it */
return -EINVAL;
}
return ieee80211_hw_config(local);
}
static int ieee80211_ioctl_giwpower(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu,
char *extra)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_conf *conf = &local->hw.conf;
wrqu->power.disabled = !(conf->flags & IEEE80211_CONF_PS);
return 0;
}
static int ieee80211_ioctl_siwauth(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *data, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret = 0;
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_WPA_VERSION:
case IW_AUTH_CIPHER_PAIRWISE:
case IW_AUTH_CIPHER_GROUP:
case IW_AUTH_WPA_ENABLED:
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
case IW_AUTH_KEY_MGMT:
break;
case IW_AUTH_DROP_UNENCRYPTED:
sdata->drop_unencrypted = !!data->value;
break;
case IW_AUTH_PRIVACY_INVOKED:
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
ret = -EINVAL;
else {
sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
/*
* Privacy invoked by wpa_supplicant, store the
* value and allow associating to a protected
* network without having a key up front.
*/
if (data->value)
sdata->u.sta.flags |=
IEEE80211_STA_PRIVACY_INVOKED;
}
break;
case IW_AUTH_80211_AUTH_ALG:
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS)
sdata->u.sta.auth_algs = data->value;
else
ret = -EOPNOTSUPP;
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
/* Get wireless statistics. Called by /proc/net/wireless and by SIOCGIWSTATS */
static struct iw_statistics *ieee80211_get_wireless_stats(struct net_device *dev)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct iw_statistics *wstats = &local->wstats;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta = NULL;
rcu_read_lock();
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS)
sta = sta_info_get(local, sdata->u.sta.bssid);
if (!sta) {
wstats->discard.fragment = 0;
wstats->discard.misc = 0;
wstats->qual.qual = 0;
wstats->qual.level = 0;
wstats->qual.noise = 0;
wstats->qual.updated = IW_QUAL_ALL_INVALID;
} else {
mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-05-08 11:15:40 -06:00
wstats->qual.level = sta->last_signal;
wstats->qual.qual = sta->last_qual;
wstats->qual.noise = sta->last_noise;
wstats->qual.updated = local->wstats_flags;
}
rcu_read_unlock();
return wstats;
}
static int ieee80211_ioctl_giwauth(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *data, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret = 0;
switch (data->flags & IW_AUTH_INDEX) {
case IW_AUTH_80211_AUTH_ALG:
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS)
data->value = sdata->u.sta.auth_algs;
else
ret = -EOPNOTSUPP;
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
static int ieee80211_ioctl_siwencodeext(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *erq, char *extra)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct iw_encode_ext *ext = (struct iw_encode_ext *) extra;
int uninitialized_var(alg), idx, i, remove = 0;
switch (ext->alg) {
case IW_ENCODE_ALG_NONE:
remove = 1;
break;
case IW_ENCODE_ALG_WEP:
alg = ALG_WEP;
break;
case IW_ENCODE_ALG_TKIP:
alg = ALG_TKIP;
break;
case IW_ENCODE_ALG_CCMP:
alg = ALG_CCMP;
break;
default:
return -EOPNOTSUPP;
}
if (erq->flags & IW_ENCODE_DISABLED)
remove = 1;
idx = erq->flags & IW_ENCODE_INDEX;
if (idx < 1 || idx > 4) {
idx = -1;
if (!sdata->default_key)
idx = 0;
else for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
if (sdata->default_key == sdata->keys[i]) {
idx = i;
break;
}
}
if (idx < 0)
return -EINVAL;
} else
idx--;
return ieee80211_set_encryption(sdata, ext->addr.sa_data, idx, alg,
remove,
ext->ext_flags &
IW_ENCODE_EXT_SET_TX_KEY,
ext->key, ext->key_len);
}
/* Structures to export the Wireless Handlers */
static const iw_handler ieee80211_handler[] =
{
(iw_handler) NULL, /* SIOCSIWCOMMIT */
(iw_handler) ieee80211_ioctl_giwname, /* SIOCGIWNAME */
(iw_handler) NULL, /* SIOCSIWNWID */
(iw_handler) NULL, /* SIOCGIWNWID */
(iw_handler) ieee80211_ioctl_siwfreq, /* SIOCSIWFREQ */
(iw_handler) ieee80211_ioctl_giwfreq, /* SIOCGIWFREQ */
(iw_handler) ieee80211_ioctl_siwmode, /* SIOCSIWMODE */
(iw_handler) ieee80211_ioctl_giwmode, /* SIOCGIWMODE */
(iw_handler) NULL, /* SIOCSIWSENS */
(iw_handler) NULL, /* SIOCGIWSENS */
(iw_handler) NULL /* not used */, /* SIOCSIWRANGE */
(iw_handler) ieee80211_ioctl_giwrange, /* SIOCGIWRANGE */
(iw_handler) NULL /* not used */, /* SIOCSIWPRIV */
(iw_handler) NULL /* kernel code */, /* SIOCGIWPRIV */
(iw_handler) NULL /* not used */, /* SIOCSIWSTATS */
(iw_handler) NULL /* kernel code */, /* SIOCGIWSTATS */
(iw_handler) NULL, /* SIOCSIWSPY */
(iw_handler) NULL, /* SIOCGIWSPY */
(iw_handler) NULL, /* SIOCSIWTHRSPY */
(iw_handler) NULL, /* SIOCGIWTHRSPY */
(iw_handler) ieee80211_ioctl_siwap, /* SIOCSIWAP */
(iw_handler) ieee80211_ioctl_giwap, /* SIOCGIWAP */
(iw_handler) ieee80211_ioctl_siwmlme, /* SIOCSIWMLME */
(iw_handler) NULL, /* SIOCGIWAPLIST */
(iw_handler) ieee80211_ioctl_siwscan, /* SIOCSIWSCAN */
(iw_handler) ieee80211_ioctl_giwscan, /* SIOCGIWSCAN */
(iw_handler) ieee80211_ioctl_siwessid, /* SIOCSIWESSID */
(iw_handler) ieee80211_ioctl_giwessid, /* SIOCGIWESSID */
(iw_handler) NULL, /* SIOCSIWNICKN */
(iw_handler) NULL, /* SIOCGIWNICKN */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) ieee80211_ioctl_siwrate, /* SIOCSIWRATE */
(iw_handler) ieee80211_ioctl_giwrate, /* SIOCGIWRATE */
(iw_handler) ieee80211_ioctl_siwrts, /* SIOCSIWRTS */
(iw_handler) ieee80211_ioctl_giwrts, /* SIOCGIWRTS */
(iw_handler) ieee80211_ioctl_siwfrag, /* SIOCSIWFRAG */
(iw_handler) ieee80211_ioctl_giwfrag, /* SIOCGIWFRAG */
(iw_handler) ieee80211_ioctl_siwtxpower, /* SIOCSIWTXPOW */
(iw_handler) ieee80211_ioctl_giwtxpower, /* SIOCGIWTXPOW */
(iw_handler) ieee80211_ioctl_siwretry, /* SIOCSIWRETRY */
(iw_handler) ieee80211_ioctl_giwretry, /* SIOCGIWRETRY */
(iw_handler) ieee80211_ioctl_siwencode, /* SIOCSIWENCODE */
(iw_handler) ieee80211_ioctl_giwencode, /* SIOCGIWENCODE */
(iw_handler) ieee80211_ioctl_siwpower, /* SIOCSIWPOWER */
(iw_handler) ieee80211_ioctl_giwpower, /* SIOCGIWPOWER */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) ieee80211_ioctl_siwgenie, /* SIOCSIWGENIE */
(iw_handler) NULL, /* SIOCGIWGENIE */
(iw_handler) ieee80211_ioctl_siwauth, /* SIOCSIWAUTH */
(iw_handler) ieee80211_ioctl_giwauth, /* SIOCGIWAUTH */
(iw_handler) ieee80211_ioctl_siwencodeext, /* SIOCSIWENCODEEXT */
(iw_handler) NULL, /* SIOCGIWENCODEEXT */
(iw_handler) NULL, /* SIOCSIWPMKSA */
(iw_handler) NULL, /* -- hole -- */
};
const struct iw_handler_def ieee80211_iw_handler_def =
{
.num_standard = ARRAY_SIZE(ieee80211_handler),
.standard = (iw_handler *) ieee80211_handler,
.get_wireless_stats = ieee80211_get_wireless_stats,
};