mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
/*
|
|
|
|
|
* The order of these masks is important. Matching masks will be seen
|
|
|
|
|
* first and the left over flags will end up showing by themselves.
|
|
|
|
|
*
|
|
|
|
|
* For example, if we have GFP_KERNEL before GFP_USER we wil get:
|
|
|
|
|
*
|
|
|
|
|
* GFP_KERNEL|GFP_HARDWALL
|
|
|
|
|
*
|
|
|
|
|
* Thus most bits set go first.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define __def_gfpflag_names \
|
|
|
|
|
{(unsigned long)GFP_TRANSHUGE, "GFP_TRANSHUGE"}, \
|
mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations
After the previous patch, we can distinguish costly allocations that
should be really lightweight, such as THP page faults, with
__GFP_NORETRY. This means we don't need to recognize khugepaged
allocations via PF_KTHREAD anymore. We can also change THP page faults
in areas where madvise(MADV_HUGEPAGE) was used to try as hard as
khugepaged, as the process has indicated that it benefits from THP's and
is willing to pay some initial latency costs.
We can also make the flags handling less cryptic by distinguishing
GFP_TRANSHUGE_LIGHT (no reclaim at all, default mode in page fault) from
GFP_TRANSHUGE (only direct reclaim, khugepaged default). Adding
__GFP_NORETRY or __GFP_KSWAPD_RECLAIM is done where needed.
The patch effectively changes the current GFP_TRANSHUGE users as
follows:
* get_huge_zero_page() - the zero page lifetime should be relatively
long and it's shared by multiple users, so it's worth spending some
effort on it. We use GFP_TRANSHUGE, and __GFP_NORETRY is not added.
This also restores direct reclaim to this allocation, which was
unintentionally removed by commit e4a49efe4e7e ("mm: thp: set THP defrag
by default to madvise and add a stall-free defrag option")
* alloc_hugepage_khugepaged_gfpmask() - this is khugepaged, so latency
is not an issue. So if khugepaged "defrag" is enabled (the default), do
reclaim via GFP_TRANSHUGE without __GFP_NORETRY. We can remove the
PF_KTHREAD check from page alloc.
As a side-effect, khugepaged will now no longer check if the initial
compaction was deferred or contended. This is OK, as khugepaged sleep
times between collapsion attempts are long enough to prevent noticeable
disruption, so we should allow it to spend some effort.
* migrate_misplaced_transhuge_page() - already was masking out
__GFP_RECLAIM, so just convert to GFP_TRANSHUGE_LIGHT which is
equivalent.
* alloc_hugepage_direct_gfpmask() - vma's with VM_HUGEPAGE (via madvise)
are now allocating without __GFP_NORETRY. Other vma's keep using
__GFP_NORETRY if direct reclaim/compaction is at all allowed (by default
it's allowed only for madvised vma's). The rest is conversion to
GFP_TRANSHUGE(_LIGHT).
[mhocko@suse.com: suggested GFP_TRANSHUGE_LIGHT]
Link: http://lkml.kernel.org/r/20160721073614.24395-7-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:49:25 -06:00
|
|
|
{(unsigned long)GFP_TRANSHUGE_LIGHT, "GFP_TRANSHUGE_LIGHT"}, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
{(unsigned long)GFP_HIGHUSER_MOVABLE, "GFP_HIGHUSER_MOVABLE"},\
|
|
|
|
|
{(unsigned long)GFP_HIGHUSER, "GFP_HIGHUSER"}, \
|
|
|
|
|
{(unsigned long)GFP_USER, "GFP_USER"}, \
|
|
|
|
|
{(unsigned long)GFP_TEMPORARY, "GFP_TEMPORARY"}, \
|
|
|
|
|
{(unsigned long)GFP_KERNEL_ACCOUNT, "GFP_KERNEL_ACCOUNT"}, \
|
|
|
|
|
{(unsigned long)GFP_KERNEL, "GFP_KERNEL"}, \
|
|
|
|
|
{(unsigned long)GFP_NOFS, "GFP_NOFS"}, \
|
|
|
|
|
{(unsigned long)GFP_ATOMIC, "GFP_ATOMIC"}, \
|
|
|
|
|
{(unsigned long)GFP_NOIO, "GFP_NOIO"}, \
|
|
|
|
|
{(unsigned long)GFP_NOWAIT, "GFP_NOWAIT"}, \
|
|
|
|
|
{(unsigned long)GFP_DMA, "GFP_DMA"}, \
|
|
|
|
|
{(unsigned long)__GFP_HIGHMEM, "__GFP_HIGHMEM"}, \
|
|
|
|
|
{(unsigned long)GFP_DMA32, "GFP_DMA32"}, \
|
|
|
|
|
{(unsigned long)__GFP_HIGH, "__GFP_HIGH"}, \
|
|
|
|
|
{(unsigned long)__GFP_ATOMIC, "__GFP_ATOMIC"}, \
|
|
|
|
|
{(unsigned long)__GFP_IO, "__GFP_IO"}, \
|
|
|
|
|
{(unsigned long)__GFP_FS, "__GFP_FS"}, \
|
|
|
|
|
{(unsigned long)__GFP_COLD, "__GFP_COLD"}, \
|
|
|
|
|
{(unsigned long)__GFP_NOWARN, "__GFP_NOWARN"}, \
|
|
|
|
|
{(unsigned long)__GFP_REPEAT, "__GFP_REPEAT"}, \
|
|
|
|
|
{(unsigned long)__GFP_NOFAIL, "__GFP_NOFAIL"}, \
|
|
|
|
|
{(unsigned long)__GFP_NORETRY, "__GFP_NORETRY"}, \
|
|
|
|
|
{(unsigned long)__GFP_COMP, "__GFP_COMP"}, \
|
|
|
|
|
{(unsigned long)__GFP_ZERO, "__GFP_ZERO"}, \
|
|
|
|
|
{(unsigned long)__GFP_NOMEMALLOC, "__GFP_NOMEMALLOC"}, \
|
|
|
|
|
{(unsigned long)__GFP_MEMALLOC, "__GFP_MEMALLOC"}, \
|
|
|
|
|
{(unsigned long)__GFP_HARDWALL, "__GFP_HARDWALL"}, \
|
|
|
|
|
{(unsigned long)__GFP_THISNODE, "__GFP_THISNODE"}, \
|
|
|
|
|
{(unsigned long)__GFP_RECLAIMABLE, "__GFP_RECLAIMABLE"}, \
|
|
|
|
|
{(unsigned long)__GFP_MOVABLE, "__GFP_MOVABLE"}, \
|
|
|
|
|
{(unsigned long)__GFP_ACCOUNT, "__GFP_ACCOUNT"}, \
|
|
|
|
|
{(unsigned long)__GFP_NOTRACK, "__GFP_NOTRACK"}, \
|
|
|
|
|
{(unsigned long)__GFP_WRITE, "__GFP_WRITE"}, \
|
|
|
|
|
{(unsigned long)__GFP_RECLAIM, "__GFP_RECLAIM"}, \
|
|
|
|
|
{(unsigned long)__GFP_DIRECT_RECLAIM, "__GFP_DIRECT_RECLAIM"},\
|
|
|
|
|
{(unsigned long)__GFP_KSWAPD_RECLAIM, "__GFP_KSWAPD_RECLAIM"},\
|
|
|
|
|
{(unsigned long)__GFP_OTHER_NODE, "__GFP_OTHER_NODE"} \
|
|
|
|
|
|
|
|
|
|
#define show_gfp_flags(flags) \
|
|
|
|
|
(flags) ? __print_flags(flags, "|", \
|
|
|
|
|
__def_gfpflag_names \
|
|
|
|
|
) : "none"
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_MMU
|
|
|
|
|
#define IF_HAVE_PG_MLOCK(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_MLOCK(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_ARCH_USES_PG_UNCACHED
|
|
|
|
|
#define IF_HAVE_PG_UNCACHED(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_UNCACHED(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_MEMORY_FAILURE
|
|
|
|
|
#define IF_HAVE_PG_HWPOISON(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_HWPOISON(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_IDLE_PAGE_TRACKING) && defined(CONFIG_64BIT)
|
|
|
|
|
#define IF_HAVE_PG_IDLE(flag,string) ,{1UL << flag, string}
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_PG_IDLE(flag,string)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define __def_pageflag_names \
|
|
|
|
|
{1UL << PG_locked, "locked" }, \
|
2016-12-24 20:00:30 -07:00
|
|
|
{1UL << PG_waiters, "waiters" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
{1UL << PG_error, "error" }, \
|
|
|
|
|
{1UL << PG_referenced, "referenced" }, \
|
|
|
|
|
{1UL << PG_uptodate, "uptodate" }, \
|
|
|
|
|
{1UL << PG_dirty, "dirty" }, \
|
|
|
|
|
{1UL << PG_lru, "lru" }, \
|
|
|
|
|
{1UL << PG_active, "active" }, \
|
|
|
|
|
{1UL << PG_slab, "slab" }, \
|
|
|
|
|
{1UL << PG_owner_priv_1, "owner_priv_1" }, \
|
|
|
|
|
{1UL << PG_arch_1, "arch_1" }, \
|
|
|
|
|
{1UL << PG_reserved, "reserved" }, \
|
|
|
|
|
{1UL << PG_private, "private" }, \
|
|
|
|
|
{1UL << PG_private_2, "private_2" }, \
|
|
|
|
|
{1UL << PG_writeback, "writeback" }, \
|
|
|
|
|
{1UL << PG_head, "head" }, \
|
|
|
|
|
{1UL << PG_mappedtodisk, "mappedtodisk" }, \
|
|
|
|
|
{1UL << PG_reclaim, "reclaim" }, \
|
|
|
|
|
{1UL << PG_swapbacked, "swapbacked" }, \
|
|
|
|
|
{1UL << PG_unevictable, "unevictable" } \
|
|
|
|
|
IF_HAVE_PG_MLOCK(PG_mlocked, "mlocked" ) \
|
|
|
|
|
IF_HAVE_PG_UNCACHED(PG_uncached, "uncached" ) \
|
|
|
|
|
IF_HAVE_PG_HWPOISON(PG_hwpoison, "hwpoison" ) \
|
|
|
|
|
IF_HAVE_PG_IDLE(PG_young, "young" ) \
|
|
|
|
|
IF_HAVE_PG_IDLE(PG_idle, "idle" )
|
|
|
|
|
|
|
|
|
|
#define show_page_flags(flags) \
|
|
|
|
|
(flags) ? __print_flags(flags, "|", \
|
|
|
|
|
__def_pageflag_names \
|
|
|
|
|
) : "none"
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_X86)
|
2016-03-17 15:18:53 -06:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_PAT, "pat" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
#elif defined(CONFIG_PPC)
|
2016-03-17 15:18:53 -06:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_SAO, "sao" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
#elif defined(CONFIG_PARISC) || defined(CONFIG_METAG) || defined(CONFIG_IA64)
|
2016-03-17 15:18:53 -06:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_GROWSUP, "growsup" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
#elif !defined(CONFIG_MMU)
|
2016-03-17 15:18:53 -06:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_MAPPED_COPY,"mappedcopy" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
#else
|
2016-03-17 15:18:53 -06:00
|
|
|
#define __VM_ARCH_SPECIFIC_1 {VM_ARCH_1, "arch_1" }
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#if defined(CONFIG_X86)
|
|
|
|
|
#define __VM_ARCH_SPECIFIC_2 {VM_MPX, "mpx" }
|
|
|
|
|
#else
|
|
|
|
|
#define __VM_ARCH_SPECIFIC_2 {VM_ARCH_2, "arch_2" }
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_MEM_SOFT_DIRTY
|
|
|
|
|
#define IF_HAVE_VM_SOFTDIRTY(flag,name) {flag, name },
|
|
|
|
|
#else
|
|
|
|
|
#define IF_HAVE_VM_SOFTDIRTY(flag,name)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define __def_vmaflag_names \
|
|
|
|
|
{VM_READ, "read" }, \
|
|
|
|
|
{VM_WRITE, "write" }, \
|
|
|
|
|
{VM_EXEC, "exec" }, \
|
|
|
|
|
{VM_SHARED, "shared" }, \
|
|
|
|
|
{VM_MAYREAD, "mayread" }, \
|
|
|
|
|
{VM_MAYWRITE, "maywrite" }, \
|
|
|
|
|
{VM_MAYEXEC, "mayexec" }, \
|
|
|
|
|
{VM_MAYSHARE, "mayshare" }, \
|
|
|
|
|
{VM_GROWSDOWN, "growsdown" }, \
|
2016-03-17 15:18:53 -06:00
|
|
|
{VM_UFFD_MISSING, "uffd_missing" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
{VM_PFNMAP, "pfnmap" }, \
|
|
|
|
|
{VM_DENYWRITE, "denywrite" }, \
|
2016-03-17 15:18:53 -06:00
|
|
|
{VM_UFFD_WP, "uffd_wp" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
{VM_LOCKED, "locked" }, \
|
|
|
|
|
{VM_IO, "io" }, \
|
|
|
|
|
{VM_SEQ_READ, "seqread" }, \
|
|
|
|
|
{VM_RAND_READ, "randread" }, \
|
|
|
|
|
{VM_DONTCOPY, "dontcopy" }, \
|
|
|
|
|
{VM_DONTEXPAND, "dontexpand" }, \
|
2016-03-17 15:18:53 -06:00
|
|
|
{VM_LOCKONFAULT, "lockonfault" }, \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
{VM_ACCOUNT, "account" }, \
|
|
|
|
|
{VM_NORESERVE, "noreserve" }, \
|
|
|
|
|
{VM_HUGETLB, "hugetlb" }, \
|
2016-03-17 15:18:53 -06:00
|
|
|
__VM_ARCH_SPECIFIC_1 , \
|
|
|
|
|
__VM_ARCH_SPECIFIC_2 , \
|
mm, tracing: unify mm flags handling in tracepoints and printk
In tracepoints, it's possible to print gfp flags in a human-friendly
format through a macro show_gfp_flags(), which defines a translation
array and passes is to __print_flags(). Since the following patch will
introduce support for gfp flags printing in printk(), it would be nice
to reuse the array. This is not straightforward, since __print_flags()
can't simply reference an array defined in a .c file such as mm/debug.c
- it has to be a macro to allow the macro magic to communicate the
format to userspace tools such as trace-cmd.
The solution is to create a macro __def_gfpflag_names which is used both
in show_gfp_flags(), and to define the gfpflag_names[] array in
mm/debug.c.
On the other hand, mm/debug.c also defines translation tables for page
flags and vma flags, and desire was expressed (but not implemented in
this series) to use these also from tracepoints. Thus, this patch also
renames the events/gfpflags.h file to events/mmflags.h and moves the
table definitions there, using the same macro approach as for gfpflags.
This allows translating all three kinds of mm-specific flags both in
tracepoints and printk.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15 15:55:52 -06:00
|
|
|
{VM_DONTDUMP, "dontdump" }, \
|
|
|
|
|
IF_HAVE_VM_SOFTDIRTY(VM_SOFTDIRTY, "softdirty" ) \
|
|
|
|
|
{VM_MIXEDMAP, "mixedmap" }, \
|
|
|
|
|
{VM_HUGEPAGE, "hugepage" }, \
|
|
|
|
|
{VM_NOHUGEPAGE, "nohugepage" }, \
|
|
|
|
|
{VM_MERGEABLE, "mergeable" } \
|
|
|
|
|
|
|
|
|
|
#define show_vma_flags(flags) \
|
|
|
|
|
(flags) ? __print_flags(flags, "|", \
|
|
|
|
|
__def_vmaflag_names \
|
|
|
|
|
) : "none"
|