2009-06-17 17:26:11 -06:00
|
|
|
/*
|
|
|
|
* Driver for Epson's RTC module RX-8025 SA/NB
|
|
|
|
*
|
|
|
|
* Copyright (C) 2009 Wolfgang Grandegger <wg@grandegger.com>
|
|
|
|
*
|
|
|
|
* Copyright (C) 2005 by Digi International Inc.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Modified by fengjh at rising.com.cn
|
|
|
|
* <http://lists.lm-sensors.org/mailman/listinfo/lm-sensors>
|
|
|
|
* 2006.11
|
|
|
|
*
|
|
|
|
* Code cleanup by Sergei Poselenov, <sposelenov@emcraft.com>
|
|
|
|
* Converted to new style by Wolfgang Grandegger <wg@grandegger.com>
|
|
|
|
* Alarm and periodic interrupt added by Dmitry Rakhchev <rda@emcraft.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* version 2 as published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
|
|
|
#include <linux/slab.h>
|
2009-06-17 17:26:11 -06:00
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/bcd.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/list.h>
|
|
|
|
#include <linux/rtc.h>
|
|
|
|
|
|
|
|
/* Register definitions */
|
|
|
|
#define RX8025_REG_SEC 0x00
|
|
|
|
#define RX8025_REG_MIN 0x01
|
|
|
|
#define RX8025_REG_HOUR 0x02
|
|
|
|
#define RX8025_REG_WDAY 0x03
|
|
|
|
#define RX8025_REG_MDAY 0x04
|
|
|
|
#define RX8025_REG_MONTH 0x05
|
|
|
|
#define RX8025_REG_YEAR 0x06
|
|
|
|
#define RX8025_REG_DIGOFF 0x07
|
|
|
|
#define RX8025_REG_ALWMIN 0x08
|
|
|
|
#define RX8025_REG_ALWHOUR 0x09
|
|
|
|
#define RX8025_REG_ALWWDAY 0x0a
|
|
|
|
#define RX8025_REG_ALDMIN 0x0b
|
|
|
|
#define RX8025_REG_ALDHOUR 0x0c
|
|
|
|
/* 0x0d is reserved */
|
|
|
|
#define RX8025_REG_CTRL1 0x0e
|
|
|
|
#define RX8025_REG_CTRL2 0x0f
|
|
|
|
|
|
|
|
#define RX8025_BIT_CTRL1_CT (7 << 0)
|
|
|
|
/* 1 Hz periodic level irq */
|
|
|
|
#define RX8025_BIT_CTRL1_CT_1HZ 4
|
|
|
|
#define RX8025_BIT_CTRL1_TEST (1 << 3)
|
|
|
|
#define RX8025_BIT_CTRL1_1224 (1 << 5)
|
|
|
|
#define RX8025_BIT_CTRL1_DALE (1 << 6)
|
|
|
|
#define RX8025_BIT_CTRL1_WALE (1 << 7)
|
|
|
|
|
|
|
|
#define RX8025_BIT_CTRL2_DAFG (1 << 0)
|
|
|
|
#define RX8025_BIT_CTRL2_WAFG (1 << 1)
|
|
|
|
#define RX8025_BIT_CTRL2_CTFG (1 << 2)
|
|
|
|
#define RX8025_BIT_CTRL2_PON (1 << 4)
|
|
|
|
#define RX8025_BIT_CTRL2_XST (1 << 5)
|
|
|
|
#define RX8025_BIT_CTRL2_VDET (1 << 6)
|
|
|
|
|
|
|
|
/* Clock precision adjustment */
|
|
|
|
#define RX8025_ADJ_RESOLUTION 3050 /* in ppb */
|
|
|
|
#define RX8025_ADJ_DATA_MAX 62
|
|
|
|
#define RX8025_ADJ_DATA_MIN -62
|
|
|
|
|
|
|
|
static const struct i2c_device_id rx8025_id[] = {
|
|
|
|
{ "rx8025", 0 },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, rx8025_id);
|
|
|
|
|
|
|
|
struct rx8025_data {
|
|
|
|
struct i2c_client *client;
|
|
|
|
struct rtc_device *rtc;
|
|
|
|
struct work_struct work;
|
|
|
|
u8 ctrl1;
|
|
|
|
unsigned exiting:1;
|
|
|
|
};
|
|
|
|
|
|
|
|
static int rx8025_read_reg(struct i2c_client *client, int number, u8 *value)
|
|
|
|
{
|
|
|
|
int ret = i2c_smbus_read_byte_data(client, (number << 4) | 0x08);
|
|
|
|
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&client->dev, "Unable to read register #%d\n", number);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
*value = ret;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_read_regs(struct i2c_client *client,
|
|
|
|
int number, u8 length, u8 *values)
|
|
|
|
{
|
|
|
|
int ret = i2c_smbus_read_i2c_block_data(client, (number << 4) | 0x08,
|
|
|
|
length, values);
|
|
|
|
|
|
|
|
if (ret != length) {
|
|
|
|
dev_err(&client->dev, "Unable to read registers #%d..#%d\n",
|
|
|
|
number, number + length - 1);
|
|
|
|
return ret < 0 ? ret : -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_write_reg(struct i2c_client *client, int number, u8 value)
|
|
|
|
{
|
|
|
|
int ret = i2c_smbus_write_byte_data(client, number << 4, value);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
dev_err(&client->dev, "Unable to write register #%d\n",
|
|
|
|
number);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_write_regs(struct i2c_client *client,
|
|
|
|
int number, u8 length, u8 *values)
|
|
|
|
{
|
|
|
|
int ret = i2c_smbus_write_i2c_block_data(client, (number << 4) | 0x08,
|
|
|
|
length, values);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
dev_err(&client->dev, "Unable to write registers #%d..#%d\n",
|
|
|
|
number, number + length - 1);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t rx8025_irq(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = dev_id;
|
|
|
|
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
|
|
|
|
|
|
|
disable_irq_nosync(irq);
|
|
|
|
schedule_work(&rx8025->work);
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rx8025_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct rx8025_data *rx8025 = container_of(work, struct rx8025_data,
|
|
|
|
work);
|
|
|
|
struct i2c_client *client = rx8025->client;
|
|
|
|
struct mutex *lock = &rx8025->rtc->ops_lock;
|
|
|
|
u8 status;
|
|
|
|
|
|
|
|
mutex_lock(lock);
|
|
|
|
|
|
|
|
if (rx8025_read_reg(client, RX8025_REG_CTRL2, &status))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (!(status & RX8025_BIT_CTRL2_XST))
|
|
|
|
dev_warn(&client->dev, "Oscillation stop was detected,"
|
|
|
|
"you may have to readjust the clock\n");
|
|
|
|
|
|
|
|
if (status & RX8025_BIT_CTRL2_CTFG) {
|
|
|
|
/* periodic */
|
|
|
|
status &= ~RX8025_BIT_CTRL2_CTFG;
|
|
|
|
local_irq_disable();
|
|
|
|
rtc_update_irq(rx8025->rtc, 1, RTC_PF | RTC_IRQF);
|
|
|
|
local_irq_enable();
|
|
|
|
}
|
|
|
|
|
|
|
|
if (status & RX8025_BIT_CTRL2_DAFG) {
|
|
|
|
/* alarm */
|
|
|
|
status &= RX8025_BIT_CTRL2_DAFG;
|
|
|
|
if (rx8025_write_reg(client, RX8025_REG_CTRL1,
|
|
|
|
rx8025->ctrl1 & ~RX8025_BIT_CTRL1_DALE))
|
|
|
|
goto out;
|
|
|
|
local_irq_disable();
|
|
|
|
rtc_update_irq(rx8025->rtc, 1, RTC_AF | RTC_IRQF);
|
|
|
|
local_irq_enable();
|
|
|
|
}
|
|
|
|
|
|
|
|
/* acknowledge IRQ */
|
|
|
|
rx8025_write_reg(client, RX8025_REG_CTRL2,
|
|
|
|
status | RX8025_BIT_CTRL2_XST);
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (!rx8025->exiting)
|
|
|
|
enable_irq(client->irq);
|
|
|
|
|
|
|
|
mutex_unlock(lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
|
|
|
|
{
|
|
|
|
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
|
|
|
u8 date[7];
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = rx8025_read_regs(rx8025->client, RX8025_REG_SEC, 7, date);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
dev_dbg(dev, "%s: read 0x%02x 0x%02x "
|
|
|
|
"0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n", __func__,
|
|
|
|
date[0], date[1], date[2], date[3], date[4],
|
|
|
|
date[5], date[6]);
|
|
|
|
|
|
|
|
dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f);
|
|
|
|
dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f);
|
|
|
|
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
|
|
|
dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f);
|
|
|
|
else
|
|
|
|
dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12
|
|
|
|
+ (date[RX8025_REG_HOUR] & 0x20 ? 12 : 0);
|
|
|
|
|
|
|
|
dt->tm_mday = bcd2bin(date[RX8025_REG_MDAY] & 0x3f);
|
|
|
|
dt->tm_mon = bcd2bin(date[RX8025_REG_MONTH] & 0x1f) - 1;
|
|
|
|
dt->tm_year = bcd2bin(date[RX8025_REG_YEAR]);
|
|
|
|
|
|
|
|
if (dt->tm_year < 70)
|
|
|
|
dt->tm_year += 100;
|
|
|
|
|
|
|
|
dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
|
|
|
|
dt->tm_sec, dt->tm_min, dt->tm_hour,
|
|
|
|
dt->tm_mday, dt->tm_mon, dt->tm_year);
|
|
|
|
|
|
|
|
return rtc_valid_tm(dt);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
|
|
|
|
{
|
|
|
|
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
|
|
|
u8 date[7];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* BUG: The HW assumes every year that is a multiple of 4 to be a leap
|
|
|
|
* year. Next time this is wrong is 2100, which will not be a leap
|
|
|
|
* year.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Here the read-only bits are written as "0". I'm not sure if that
|
|
|
|
* is sound.
|
|
|
|
*/
|
|
|
|
date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec);
|
|
|
|
date[RX8025_REG_MIN] = bin2bcd(dt->tm_min);
|
|
|
|
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
|
|
|
date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour);
|
|
|
|
else
|
|
|
|
date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0)
|
|
|
|
| bin2bcd((dt->tm_hour + 11) % 12 + 1);
|
|
|
|
|
|
|
|
date[RX8025_REG_WDAY] = bin2bcd(dt->tm_wday);
|
|
|
|
date[RX8025_REG_MDAY] = bin2bcd(dt->tm_mday);
|
|
|
|
date[RX8025_REG_MONTH] = bin2bcd(dt->tm_mon + 1);
|
|
|
|
date[RX8025_REG_YEAR] = bin2bcd(dt->tm_year % 100);
|
|
|
|
|
|
|
|
dev_dbg(dev,
|
|
|
|
"%s: write 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
|
|
|
|
__func__,
|
|
|
|
date[0], date[1], date[2], date[3], date[4], date[5], date[6]);
|
|
|
|
|
|
|
|
return rx8025_write_regs(rx8025->client, RX8025_REG_SEC, 7, date);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_init_client(struct i2c_client *client, int *need_reset)
|
|
|
|
{
|
|
|
|
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
|
|
|
u8 ctrl[2], ctrl2;
|
|
|
|
int need_clear = 0;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = rx8025_read_regs(rx8025->client, RX8025_REG_CTRL1, 2, ctrl);
|
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* Keep test bit zero ! */
|
|
|
|
rx8025->ctrl1 = ctrl[0] & ~RX8025_BIT_CTRL1_TEST;
|
|
|
|
|
|
|
|
if (ctrl[1] & RX8025_BIT_CTRL2_PON) {
|
|
|
|
dev_warn(&client->dev, "power-on reset was detected, "
|
|
|
|
"you may have to readjust the clock\n");
|
|
|
|
*need_reset = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ctrl[1] & RX8025_BIT_CTRL2_VDET) {
|
|
|
|
dev_warn(&client->dev, "a power voltage drop was detected, "
|
|
|
|
"you may have to readjust the clock\n");
|
|
|
|
*need_reset = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(ctrl[1] & RX8025_BIT_CTRL2_XST)) {
|
|
|
|
dev_warn(&client->dev, "Oscillation stop was detected,"
|
|
|
|
"you may have to readjust the clock\n");
|
|
|
|
*need_reset = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ctrl[1] & (RX8025_BIT_CTRL2_DAFG | RX8025_BIT_CTRL2_WAFG)) {
|
|
|
|
dev_warn(&client->dev, "Alarm was detected\n");
|
|
|
|
need_clear = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(ctrl[1] & RX8025_BIT_CTRL2_CTFG))
|
|
|
|
need_clear = 1;
|
|
|
|
|
|
|
|
if (*need_reset || need_clear) {
|
|
|
|
ctrl2 = ctrl[0];
|
|
|
|
ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET |
|
|
|
|
RX8025_BIT_CTRL2_CTFG | RX8025_BIT_CTRL2_WAFG |
|
|
|
|
RX8025_BIT_CTRL2_DAFG);
|
|
|
|
ctrl2 |= RX8025_BIT_CTRL2_XST;
|
|
|
|
|
|
|
|
err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2);
|
|
|
|
}
|
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Alarm support */
|
|
|
|
static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
|
|
|
|
{
|
|
|
|
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
|
|
|
struct i2c_client *client = rx8025->client;
|
|
|
|
u8 ctrl2, ald[2];
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (client->irq <= 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
err = rx8025_read_regs(client, RX8025_REG_ALDMIN, 2, ald);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = rx8025_read_reg(client, RX8025_REG_CTRL2, &ctrl2);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
dev_dbg(dev, "%s: read alarm 0x%02x 0x%02x ctrl2 %02x\n",
|
|
|
|
__func__, ald[0], ald[1], ctrl2);
|
|
|
|
|
|
|
|
/* Hardware alarms precision is 1 minute! */
|
|
|
|
t->time.tm_sec = 0;
|
|
|
|
t->time.tm_min = bcd2bin(ald[0] & 0x7f);
|
|
|
|
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
|
|
|
t->time.tm_hour = bcd2bin(ald[1] & 0x3f);
|
|
|
|
else
|
|
|
|
t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
|
|
|
|
+ (ald[1] & 0x20 ? 12 : 0);
|
|
|
|
|
|
|
|
t->time.tm_wday = -1;
|
|
|
|
t->time.tm_mday = -1;
|
|
|
|
t->time.tm_mon = -1;
|
|
|
|
t->time.tm_year = -1;
|
|
|
|
|
|
|
|
dev_dbg(dev, "%s: date: %ds %dm %dh %dmd %dm %dy\n",
|
|
|
|
__func__,
|
|
|
|
t->time.tm_sec, t->time.tm_min, t->time.tm_hour,
|
|
|
|
t->time.tm_mday, t->time.tm_mon, t->time.tm_year);
|
|
|
|
t->enabled = !!(rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE);
|
|
|
|
t->pending = (ctrl2 & RX8025_BIT_CTRL2_DAFG) && t->enabled;
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
|
|
|
u8 ald[2];
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (client->irq <= 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* Hardware alarm precision is 1 minute! */
|
|
|
|
ald[0] = bin2bcd(t->time.tm_min);
|
|
|
|
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
|
|
|
|
ald[1] = bin2bcd(t->time.tm_hour);
|
|
|
|
else
|
|
|
|
ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0)
|
|
|
|
| bin2bcd((t->time.tm_hour + 11) % 12 + 1);
|
|
|
|
|
|
|
|
dev_dbg(dev, "%s: write 0x%02x 0x%02x\n", __func__, ald[0], ald[1]);
|
|
|
|
|
|
|
|
if (rx8025->ctrl1 & RX8025_BIT_CTRL1_DALE) {
|
|
|
|
rx8025->ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
|
|
|
|
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
|
|
|
rx8025->ctrl1);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
err = rx8025_write_regs(rx8025->client, RX8025_REG_ALDMIN, 2, ald);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
if (t->enabled) {
|
|
|
|
rx8025->ctrl1 |= RX8025_BIT_CTRL1_DALE;
|
|
|
|
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
|
|
|
rx8025->ctrl1);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
|
|
{
|
|
|
|
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
|
|
|
|
u8 ctrl1;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
ctrl1 = rx8025->ctrl1;
|
|
|
|
if (enabled)
|
|
|
|
ctrl1 |= RX8025_BIT_CTRL1_DALE;
|
|
|
|
else
|
|
|
|
ctrl1 &= ~RX8025_BIT_CTRL1_DALE;
|
|
|
|
|
|
|
|
if (ctrl1 != rx8025->ctrl1) {
|
|
|
|
rx8025->ctrl1 = ctrl1;
|
|
|
|
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
|
|
|
rx8025->ctrl1);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_irq_set_state(struct device *dev, int enabled)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
|
|
|
int ctrl1;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (client->irq <= 0)
|
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
ctrl1 = rx8025->ctrl1 & ~RX8025_BIT_CTRL1_CT;
|
|
|
|
if (enabled)
|
|
|
|
ctrl1 |= RX8025_BIT_CTRL1_CT_1HZ;
|
|
|
|
if (ctrl1 != rx8025->ctrl1) {
|
|
|
|
rx8025->ctrl1 = ctrl1;
|
|
|
|
err = rx8025_write_reg(rx8025->client, RX8025_REG_CTRL1,
|
|
|
|
rx8025->ctrl1);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct rtc_class_ops rx8025_rtc_ops = {
|
|
|
|
.read_time = rx8025_get_time,
|
|
|
|
.set_time = rx8025_set_time,
|
|
|
|
.read_alarm = rx8025_read_alarm,
|
|
|
|
.set_alarm = rx8025_set_alarm,
|
|
|
|
.alarm_irq_enable = rx8025_alarm_irq_enable,
|
|
|
|
.irq_set_state = rx8025_irq_set_state,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Clock precision adjustment support
|
|
|
|
*
|
|
|
|
* According to the RX8025 SA/NB application manual the frequency and
|
2010-07-19 00:22:43 -06:00
|
|
|
* temperature characteristics can be approximated using the following
|
2009-06-17 17:26:11 -06:00
|
|
|
* equation:
|
|
|
|
*
|
|
|
|
* df = a * (ut - t)**2
|
|
|
|
*
|
|
|
|
* df: Frequency deviation in any temperature
|
|
|
|
* a : Coefficient = (-35 +-5) * 10**-9
|
|
|
|
* ut: Ultimate temperature in degree = +25 +-5 degree
|
|
|
|
* t : Any temperature in degree
|
|
|
|
*
|
|
|
|
* Note that the clock adjustment in ppb must be entered (which is
|
|
|
|
* the negative value of the deviation).
|
|
|
|
*/
|
|
|
|
static int rx8025_get_clock_adjust(struct device *dev, int *adj)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
u8 digoff;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = rx8025_read_reg(client, RX8025_REG_DIGOFF, &digoff);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
*adj = digoff >= 64 ? digoff - 128 : digoff;
|
|
|
|
if (*adj > 0)
|
|
|
|
(*adj)--;
|
|
|
|
*adj *= -RX8025_ADJ_RESOLUTION;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rx8025_set_clock_adjust(struct device *dev, int adj)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
u8 digoff;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
adj /= -RX8025_ADJ_RESOLUTION;
|
|
|
|
if (adj > RX8025_ADJ_DATA_MAX)
|
|
|
|
adj = RX8025_ADJ_DATA_MAX;
|
|
|
|
else if (adj < RX8025_ADJ_DATA_MIN)
|
|
|
|
adj = RX8025_ADJ_DATA_MIN;
|
|
|
|
else if (adj > 0)
|
|
|
|
adj++;
|
|
|
|
else if (adj < 0)
|
|
|
|
adj += 128;
|
|
|
|
digoff = adj;
|
|
|
|
|
|
|
|
err = rx8025_write_reg(client, RX8025_REG_DIGOFF, digoff);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
dev_dbg(dev, "%s: write 0x%02x\n", __func__, digoff);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t rx8025_sysfs_show_clock_adjust(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
int err, adj;
|
|
|
|
|
|
|
|
err = rx8025_get_clock_adjust(dev, &adj);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
return sprintf(buf, "%d\n", adj);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t rx8025_sysfs_store_clock_adjust(struct device *dev,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
int adj, err;
|
|
|
|
|
|
|
|
if (sscanf(buf, "%i", &adj) != 1)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
err = rx8025_set_clock_adjust(dev, adj);
|
|
|
|
|
|
|
|
return err ? err : count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(clock_adjust_ppb, S_IRUGO | S_IWUSR,
|
|
|
|
rx8025_sysfs_show_clock_adjust,
|
|
|
|
rx8025_sysfs_store_clock_adjust);
|
|
|
|
|
|
|
|
static int rx8025_sysfs_register(struct device *dev)
|
|
|
|
{
|
|
|
|
return device_create_file(dev, &dev_attr_clock_adjust_ppb);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rx8025_sysfs_unregister(struct device *dev)
|
|
|
|
{
|
|
|
|
device_remove_file(dev, &dev_attr_clock_adjust_ppb);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit rx8025_probe(struct i2c_client *client,
|
|
|
|
const struct i2c_device_id *id)
|
|
|
|
{
|
|
|
|
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
|
|
|
|
struct rx8025_data *rx8025;
|
|
|
|
int err, need_reset = 0;
|
|
|
|
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA
|
|
|
|
| I2C_FUNC_SMBUS_I2C_BLOCK)) {
|
|
|
|
dev_err(&adapter->dev,
|
|
|
|
"doesn't support required functionality\n");
|
|
|
|
err = -EIO;
|
|
|
|
goto errout;
|
|
|
|
}
|
|
|
|
|
|
|
|
rx8025 = kzalloc(sizeof(*rx8025), GFP_KERNEL);
|
|
|
|
if (!rx8025) {
|
|
|
|
dev_err(&adapter->dev, "failed to alloc memory\n");
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto errout;
|
|
|
|
}
|
|
|
|
|
|
|
|
rx8025->client = client;
|
|
|
|
i2c_set_clientdata(client, rx8025);
|
|
|
|
INIT_WORK(&rx8025->work, rx8025_work);
|
|
|
|
|
|
|
|
err = rx8025_init_client(client, &need_reset);
|
|
|
|
if (err)
|
|
|
|
goto errout_free;
|
|
|
|
|
|
|
|
if (need_reset) {
|
|
|
|
struct rtc_time tm;
|
|
|
|
dev_info(&client->dev,
|
|
|
|
"bad conditions detected, resetting date\n");
|
|
|
|
rtc_time_to_tm(0, &tm); /* 1970/1/1 */
|
|
|
|
rx8025_set_time(&client->dev, &tm);
|
|
|
|
}
|
|
|
|
|
|
|
|
rx8025->rtc = rtc_device_register(client->name, &client->dev,
|
|
|
|
&rx8025_rtc_ops, THIS_MODULE);
|
|
|
|
if (IS_ERR(rx8025->rtc)) {
|
|
|
|
err = PTR_ERR(rx8025->rtc);
|
|
|
|
dev_err(&client->dev, "unable to register the class device\n");
|
|
|
|
goto errout_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (client->irq > 0) {
|
|
|
|
dev_info(&client->dev, "IRQ %d supplied\n", client->irq);
|
|
|
|
err = request_irq(client->irq, rx8025_irq,
|
|
|
|
0, "rx8025", client);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&client->dev, "unable to request IRQ\n");
|
|
|
|
goto errout_reg;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
rx8025->rtc->irq_freq = 1;
|
|
|
|
rx8025->rtc->max_user_freq = 1;
|
|
|
|
|
|
|
|
err = rx8025_sysfs_register(&client->dev);
|
|
|
|
if (err)
|
|
|
|
goto errout_irq;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
errout_irq:
|
|
|
|
if (client->irq > 0)
|
|
|
|
free_irq(client->irq, client);
|
|
|
|
|
|
|
|
errout_reg:
|
|
|
|
rtc_device_unregister(rx8025->rtc);
|
|
|
|
|
|
|
|
errout_free:
|
|
|
|
kfree(rx8025);
|
|
|
|
|
|
|
|
errout:
|
|
|
|
dev_err(&adapter->dev, "probing for rx8025 failed\n");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devexit rx8025_remove(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
struct rx8025_data *rx8025 = i2c_get_clientdata(client);
|
|
|
|
struct mutex *lock = &rx8025->rtc->ops_lock;
|
|
|
|
|
|
|
|
if (client->irq > 0) {
|
|
|
|
mutex_lock(lock);
|
|
|
|
rx8025->exiting = 1;
|
|
|
|
mutex_unlock(lock);
|
|
|
|
|
|
|
|
free_irq(client->irq, client);
|
|
|
|
flush_scheduled_work();
|
|
|
|
}
|
|
|
|
|
|
|
|
rx8025_sysfs_unregister(&client->dev);
|
|
|
|
rtc_device_unregister(rx8025->rtc);
|
|
|
|
kfree(rx8025);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct i2c_driver rx8025_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "rtc-rx8025",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
.probe = rx8025_probe,
|
|
|
|
.remove = __devexit_p(rx8025_remove),
|
|
|
|
.id_table = rx8025_id,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init rx8025_init(void)
|
|
|
|
{
|
|
|
|
return i2c_add_driver(&rx8025_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit rx8025_exit(void)
|
|
|
|
{
|
|
|
|
i2c_del_driver(&rx8025_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
|
|
|
|
MODULE_DESCRIPTION("RX-8025 SA/NB RTC driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
module_init(rx8025_init);
|
|
|
|
module_exit(rx8025_exit);
|