1
0
Fork 0
alistair23-linux/include/linux/irqdesc.h

217 lines
6.3 KiB
C
Raw Normal View History

#ifndef _LINUX_IRQDESC_H
#define _LINUX_IRQDESC_H
/*
* Core internal functions to deal with irq descriptors
*
* This include will move to kernel/irq once we cleaned up the tree.
* For now it's included from <linux/irq.h>
*/
struct irq_affinity_notify;
struct proc_dir_entry;
struct module;
struct irq_desc;
genirq: Add irq_domain-aware core IRQ handler Calling irq_find_mapping from outside a irq_{enter,exit} section is unsafe and produces ugly messages if CONFIG_PROVE_RCU is enabled: If coming from the idle state, the rcu_read_lock call in irq_find_mapping will generate an unpleasant warning: <quote> =============================== [ INFO: suspicious RCU usage. ] 3.16.0-rc1+ #135 Not tainted ------------------------------- include/linux/rcupdate.h:871 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (rcu_read_lock){......}, at: [<ffffffc00010206c>] irq_find_mapping+0x4c/0x198 </quote> As this issue is fairly widespread and involves at least three different architectures, a possible solution is to add a new handle_domain_irq entry point into the generic IRQ code that the interrupt controller code can call. This new function takes an irq_domain, and calls into irq_find_domain inside the irq_{enter,exit} block. An additional "lookup" parameter is used to allow non-domain architecture code to be replaced by this as well. Interrupt controllers can then be updated to use the new mechanism. This code is sitting behind a new CONFIG_HANDLE_DOMAIN_IRQ, as not all architectures implement set_irq_regs (yes, mn10300, I'm looking at you...). Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1409047421-27649-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-26 04:03:16 -06:00
struct irq_domain;
struct pt_regs;
/**
* struct irq_desc - interrupt descriptor
* @irq_data: per irq and chip data passed down to chip functions
* @kstat_irqs: irq stats per cpu
* @handle_irq: highlevel irq-events handler
* @preflow_handler: handler called before the flow handler (currently used by sparc)
* @action: the irq action chain
* @status: status information
* @core_internal_state__do_not_mess_with_it: core internal status information
* @depth: disable-depth, for nested irq_disable() calls
* @wake_depth: enable depth, for multiple irq_set_irq_wake() callers
* @irq_count: stats field to detect stalled irqs
* @last_unhandled: aging timer for unhandled count
* @irqs_unhandled: stats field for spurious unhandled interrupts
genirq: Sanitize spurious interrupt detection of threaded irqs Till reported that the spurious interrupt detection of threaded interrupts is broken in two ways: - note_interrupt() is called for each action thread of a shared interrupt line. That's wrong as we are only interested whether none of the device drivers felt responsible for the interrupt, but by calling multiple times for a single interrupt line we account IRQ_NONE even if one of the drivers felt responsible. - note_interrupt() when called from the thread handler is not serialized. That leaves the members of irq_desc which are used for the spurious detection unprotected. To solve this we need to defer the spurious detection of a threaded interrupt to the next hardware interrupt context where we have implicit serialization. If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we check whether the previous interrupt requested a deferred check. If not, we request a deferred check for the next hardware interrupt and return. If set, we check whether one of the interrupt threads signaled success. Depending on this information we feed the result into the spurious detector. If one primary handler of a shared interrupt returns IRQ_HANDLED we disable the deferred check of irq threads on the same line, as we have found at least one device driver who cared. Reported-by: Till Straumann <strauman@slac.stanford.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Austin Schuh <austin@peloton-tech.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos
2013-03-07 06:53:45 -07:00
* @threads_handled: stats field for deferred spurious detection of threaded handlers
* @threads_handled_last: comparator field for deferred spurious detection of theraded handlers
* @lock: locking for SMP
* @affinity_hint: hint to user space for preferred irq affinity
* @affinity_notify: context for notification of affinity changes
* @pending_mask: pending rebalanced interrupts
* @threads_oneshot: bitfield to handle shared oneshot threads
* @threads_active: number of irqaction threads currently running
* @wait_for_threads: wait queue for sync_irq to wait for threaded handlers
* @nr_actions: number of installed actions on this descriptor
* @no_suspend_depth: number of irqactions on a irq descriptor with
* IRQF_NO_SUSPEND set
* @force_resume_depth: number of irqactions on a irq descriptor with
* IRQF_FORCE_RESUME set
* @dir: /proc/irq/ procfs entry
* @name: flow handler name for /proc/interrupts output
*/
struct irq_desc {
struct irq_data irq_data;
unsigned int __percpu *kstat_irqs;
irq_flow_handler_t handle_irq;
#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
irq_preflow_handler_t preflow_handler;
#endif
struct irqaction *action; /* IRQ action list */
unsigned int status_use_accessors;
unsigned int core_internal_state__do_not_mess_with_it;
unsigned int depth; /* nested irq disables */
unsigned int wake_depth; /* nested wake enables */
unsigned int irq_count; /* For detecting broken IRQs */
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
genirq: Sanitize spurious interrupt detection of threaded irqs Till reported that the spurious interrupt detection of threaded interrupts is broken in two ways: - note_interrupt() is called for each action thread of a shared interrupt line. That's wrong as we are only interested whether none of the device drivers felt responsible for the interrupt, but by calling multiple times for a single interrupt line we account IRQ_NONE even if one of the drivers felt responsible. - note_interrupt() when called from the thread handler is not serialized. That leaves the members of irq_desc which are used for the spurious detection unprotected. To solve this we need to defer the spurious detection of a threaded interrupt to the next hardware interrupt context where we have implicit serialization. If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we check whether the previous interrupt requested a deferred check. If not, we request a deferred check for the next hardware interrupt and return. If set, we check whether one of the interrupt threads signaled success. Depending on this information we feed the result into the spurious detector. If one primary handler of a shared interrupt returns IRQ_HANDLED we disable the deferred check of irq threads on the same line, as we have found at least one device driver who cared. Reported-by: Till Straumann <strauman@slac.stanford.edu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Austin Schuh <austin@peloton-tech.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos
2013-03-07 06:53:45 -07:00
atomic_t threads_handled;
int threads_handled_last;
raw_spinlock_t lock;
genirq: Add support for per-cpu dev_id interrupts The ARM GIC interrupt controller offers per CPU interrupts (PPIs), which are usually used to connect local timers to each core. Each CPU has its own private interface to the GIC, and only sees the PPIs that are directly connect to it. While these timers are separate devices and have a separate interrupt line to a core, they all use the same IRQ number. For these devices, request_irq() is not the right API as it assumes that an IRQ number is visible by a number of CPUs (through the affinity setting), but makes it very awkward to express that an IRQ number can be handled by all CPUs, and yet be a different interrupt line on each CPU, requiring a different dev_id cookie to be passed back to the handler. The *_percpu_irq() functions is designed to overcome these limitations, by providing a per-cpu dev_id vector: int request_percpu_irq(unsigned int irq, irq_handler_t handler, const char *devname, void __percpu *percpu_dev_id); void free_percpu_irq(unsigned int, void __percpu *); int setup_percpu_irq(unsigned int irq, struct irqaction *new); void remove_percpu_irq(unsigned int irq, struct irqaction *act); void enable_percpu_irq(unsigned int irq); void disable_percpu_irq(unsigned int irq); The API has a number of limitations: - no interrupt sharing - no threading - common handler across all the CPUs Once the interrupt is requested using setup_percpu_irq() or request_percpu_irq(), it must be enabled by each core that wishes its local interrupt to be delivered. Based on an initial patch by Thomas Gleixner. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1316793788-14500-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-23 10:03:06 -06:00
struct cpumask *percpu_enabled;
#ifdef CONFIG_SMP
const struct cpumask *affinity_hint;
struct irq_affinity_notify *affinity_notify;
#ifdef CONFIG_GENERIC_PENDING_IRQ
cpumask_var_t pending_mask;
#endif
#endif
unsigned long threads_oneshot;
atomic_t threads_active;
wait_queue_head_t wait_for_threads;
#ifdef CONFIG_PM_SLEEP
unsigned int nr_actions;
unsigned int no_suspend_depth;
unsigned int force_resume_depth;
#endif
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *dir;
#endif
int parent_irq;
struct module *owner;
const char *name;
} ____cacheline_internodealigned_in_smp;
#ifndef CONFIG_SPARSE_IRQ
extern struct irq_desc irq_desc[NR_IRQS];
#endif
static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
{
return &desc->irq_data;
}
static inline struct irq_chip *irq_desc_get_chip(struct irq_desc *desc)
{
return desc->irq_data.chip;
}
static inline void *irq_desc_get_chip_data(struct irq_desc *desc)
{
return desc->irq_data.chip_data;
}
static inline void *irq_desc_get_handler_data(struct irq_desc *desc)
{
return desc->irq_data.handler_data;
}
static inline struct msi_desc *irq_desc_get_msi_desc(struct irq_desc *desc)
{
return desc->irq_data.msi_desc;
}
/*
* Architectures call this to let the generic IRQ layer
* handle an interrupt. If the descriptor is attached to an
* irqchip-style controller then we call the ->handle_irq() handler,
* and it calls __do_IRQ() if it's attached to an irqtype-style controller.
*/
static inline void generic_handle_irq_desc(unsigned int irq, struct irq_desc *desc)
{
desc->handle_irq(irq, desc);
}
int generic_handle_irq(unsigned int irq);
genirq: Add irq_domain-aware core IRQ handler Calling irq_find_mapping from outside a irq_{enter,exit} section is unsafe and produces ugly messages if CONFIG_PROVE_RCU is enabled: If coming from the idle state, the rcu_read_lock call in irq_find_mapping will generate an unpleasant warning: <quote> =============================== [ INFO: suspicious RCU usage. ] 3.16.0-rc1+ #135 Not tainted ------------------------------- include/linux/rcupdate.h:871 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (rcu_read_lock){......}, at: [<ffffffc00010206c>] irq_find_mapping+0x4c/0x198 </quote> As this issue is fairly widespread and involves at least three different architectures, a possible solution is to add a new handle_domain_irq entry point into the generic IRQ code that the interrupt controller code can call. This new function takes an irq_domain, and calls into irq_find_domain inside the irq_{enter,exit} block. An additional "lookup" parameter is used to allow non-domain architecture code to be replaced by this as well. Interrupt controllers can then be updated to use the new mechanism. This code is sitting behind a new CONFIG_HANDLE_DOMAIN_IRQ, as not all architectures implement set_irq_regs (yes, mn10300, I'm looking at you...). Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1409047421-27649-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-26 04:03:16 -06:00
#ifdef CONFIG_HANDLE_DOMAIN_IRQ
/*
* Convert a HW interrupt number to a logical one using a IRQ domain,
* and handle the result interrupt number. Return -EINVAL if
* conversion failed. Providing a NULL domain indicates that the
* conversion has already been done.
*/
int __handle_domain_irq(struct irq_domain *domain, unsigned int hwirq,
bool lookup, struct pt_regs *regs);
static inline int handle_domain_irq(struct irq_domain *domain,
unsigned int hwirq, struct pt_regs *regs)
{
return __handle_domain_irq(domain, hwirq, true, regs);
}
#endif
/* Test to see if a driver has successfully requested an irq */
static inline int irq_has_action(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
return desc->action != NULL;
}
/* caller has locked the irq_desc and both params are valid */
static inline void __irq_set_handler_locked(unsigned int irq,
irq_flow_handler_t handler)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
desc->handle_irq = handler;
}
/* caller has locked the irq_desc and both params are valid */
static inline void
__irq_set_chip_handler_name_locked(unsigned int irq, struct irq_chip *chip,
irq_flow_handler_t handler, const char *name)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
irq_desc_get_irq_data(desc)->chip = chip;
desc->handle_irq = handler;
desc->name = name;
}
static inline int irq_balancing_disabled(unsigned int irq)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
return desc->status_use_accessors & IRQ_NO_BALANCING_MASK;
}
static inline int irq_is_percpu(unsigned int irq)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
return desc->status_use_accessors & IRQ_PER_CPU;
}
static inline void
irq_set_lockdep_class(unsigned int irq, struct lock_class_key *class)
{
struct irq_desc *desc = irq_to_desc(irq);
if (desc)
lockdep_set_class(&desc->lock, class);
}
#ifdef CONFIG_IRQ_PREFLOW_FASTEOI
static inline void
__irq_set_preflow_handler(unsigned int irq, irq_preflow_handler_t handler)
{
struct irq_desc *desc;
desc = irq_to_desc(irq);
desc->preflow_handler = handler;
}
#endif
#endif