1
0
Fork 0
alistair23-linux/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c

473 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
/*
* This contains the functions to handle the descriptors for DesignWare databook
* 4.xx.
*
* Copyright (C) 2015 STMicroelectronics Ltd
*
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
#include <linux/stmmac.h>
#include "common.h"
#include "dwmac4_descs.h"
static int dwmac4_wrback_get_tx_status(void *data, struct stmmac_extra_stats *x,
struct dma_desc *p,
void __iomem *ioaddr)
{
struct net_device_stats *stats = (struct net_device_stats *)data;
unsigned int tdes3;
int ret = tx_done;
tdes3 = le32_to_cpu(p->des3);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
/* Get tx owner first */
if (unlikely(tdes3 & TDES3_OWN))
return tx_dma_own;
/* Verify tx error by looking at the last segment. */
if (likely(!(tdes3 & TDES3_LAST_DESCRIPTOR)))
return tx_not_ls;
if (unlikely(tdes3 & TDES3_ERROR_SUMMARY)) {
if (unlikely(tdes3 & TDES3_JABBER_TIMEOUT))
x->tx_jabber++;
if (unlikely(tdes3 & TDES3_PACKET_FLUSHED))
x->tx_frame_flushed++;
if (unlikely(tdes3 & TDES3_LOSS_CARRIER)) {
x->tx_losscarrier++;
stats->tx_carrier_errors++;
}
if (unlikely(tdes3 & TDES3_NO_CARRIER)) {
x->tx_carrier++;
stats->tx_carrier_errors++;
}
if (unlikely((tdes3 & TDES3_LATE_COLLISION) ||
(tdes3 & TDES3_EXCESSIVE_COLLISION)))
stats->collisions +=
(tdes3 & TDES3_COLLISION_COUNT_MASK)
>> TDES3_COLLISION_COUNT_SHIFT;
if (unlikely(tdes3 & TDES3_EXCESSIVE_DEFERRAL))
x->tx_deferred++;
if (unlikely(tdes3 & TDES3_UNDERFLOW_ERROR))
x->tx_underflow++;
if (unlikely(tdes3 & TDES3_IP_HDR_ERROR))
x->tx_ip_header_error++;
if (unlikely(tdes3 & TDES3_PAYLOAD_ERROR))
x->tx_payload_error++;
ret = tx_err;
}
if (unlikely(tdes3 & TDES3_DEFERRED))
x->tx_deferred++;
return ret;
}
static int dwmac4_wrback_get_rx_status(void *data, struct stmmac_extra_stats *x,
struct dma_desc *p)
{
struct net_device_stats *stats = (struct net_device_stats *)data;
unsigned int rdes1 = le32_to_cpu(p->des1);
unsigned int rdes2 = le32_to_cpu(p->des2);
unsigned int rdes3 = le32_to_cpu(p->des3);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
int message_type;
int ret = good_frame;
if (unlikely(rdes3 & RDES3_OWN))
return dma_own;
/* Verify rx error by looking at the last segment. */
if (likely(!(rdes3 & RDES3_LAST_DESCRIPTOR)))
return discard_frame;
if (unlikely(rdes3 & RDES3_ERROR_SUMMARY)) {
if (unlikely(rdes3 & RDES3_GIANT_PACKET))
stats->rx_length_errors++;
if (unlikely(rdes3 & RDES3_OVERFLOW_ERROR))
x->rx_gmac_overflow++;
if (unlikely(rdes3 & RDES3_RECEIVE_WATCHDOG))
x->rx_watchdog++;
if (unlikely(rdes3 & RDES3_RECEIVE_ERROR))
x->rx_mii++;
if (unlikely(rdes3 & RDES3_CRC_ERROR)) {
x->rx_crc_errors++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
stats->rx_crc_errors++;
}
if (unlikely(rdes3 & RDES3_DRIBBLE_ERROR))
x->dribbling_bit++;
ret = discard_frame;
}
message_type = (rdes1 & ERDES4_MSG_TYPE_MASK) >> 8;
if (rdes1 & RDES1_IP_HDR_ERROR)
x->ip_hdr_err++;
if (rdes1 & RDES1_IP_CSUM_BYPASSED)
x->ip_csum_bypassed++;
if (rdes1 & RDES1_IPV4_HEADER)
x->ipv4_pkt_rcvd++;
if (rdes1 & RDES1_IPV6_HEADER)
x->ipv6_pkt_rcvd++;
if (message_type == RDES_EXT_NO_PTP)
x->no_ptp_rx_msg_type_ext++;
else if (message_type == RDES_EXT_SYNC)
x->ptp_rx_msg_type_sync++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
else if (message_type == RDES_EXT_FOLLOW_UP)
x->ptp_rx_msg_type_follow_up++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
else if (message_type == RDES_EXT_DELAY_REQ)
x->ptp_rx_msg_type_delay_req++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
else if (message_type == RDES_EXT_DELAY_RESP)
x->ptp_rx_msg_type_delay_resp++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
else if (message_type == RDES_EXT_PDELAY_REQ)
x->ptp_rx_msg_type_pdelay_req++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
else if (message_type == RDES_EXT_PDELAY_RESP)
x->ptp_rx_msg_type_pdelay_resp++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
else if (message_type == RDES_EXT_PDELAY_FOLLOW_UP)
x->ptp_rx_msg_type_pdelay_follow_up++;
else if (message_type == RDES_PTP_ANNOUNCE)
x->ptp_rx_msg_type_announce++;
else if (message_type == RDES_PTP_MANAGEMENT)
x->ptp_rx_msg_type_management++;
else if (message_type == RDES_PTP_PKT_RESERVED_TYPE)
x->ptp_rx_msg_pkt_reserved_type++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
if (rdes1 & RDES1_PTP_PACKET_TYPE)
x->ptp_frame_type++;
if (rdes1 & RDES1_PTP_VER)
x->ptp_ver++;
if (rdes1 & RDES1_TIMESTAMP_DROPPED)
x->timestamp_dropped++;
if (unlikely(rdes2 & RDES2_SA_FILTER_FAIL)) {
x->sa_rx_filter_fail++;
ret = discard_frame;
}
if (unlikely(rdes2 & RDES2_DA_FILTER_FAIL)) {
x->da_rx_filter_fail++;
ret = discard_frame;
}
if (rdes2 & RDES2_L3_FILTER_MATCH)
x->l3_filter_match++;
if (rdes2 & RDES2_L4_FILTER_MATCH)
x->l4_filter_match++;
if ((rdes2 & RDES2_L3_L4_FILT_NB_MATCH_MASK)
>> RDES2_L3_L4_FILT_NB_MATCH_SHIFT)
x->l3_l4_filter_no_match++;
return ret;
}
static int dwmac4_rd_get_tx_len(struct dma_desc *p)
{
return (le32_to_cpu(p->des2) & TDES2_BUFFER1_SIZE_MASK);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static int dwmac4_get_tx_owner(struct dma_desc *p)
{
return (le32_to_cpu(p->des3) & TDES3_OWN) >> TDES3_OWN_SHIFT;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_set_tx_owner(struct dma_desc *p)
{
p->des3 |= cpu_to_le32(TDES3_OWN);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_set_rx_owner(struct dma_desc *p, int disable_rx_ic)
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
{
p->des3 = cpu_to_le32(RDES3_OWN | RDES3_BUFFER1_VALID_ADDR);
if (!disable_rx_ic)
p->des3 |= cpu_to_le32(RDES3_INT_ON_COMPLETION_EN);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static int dwmac4_get_tx_ls(struct dma_desc *p)
{
return (le32_to_cpu(p->des3) & TDES3_LAST_DESCRIPTOR)
>> TDES3_LAST_DESCRIPTOR_SHIFT;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static int dwmac4_wrback_get_rx_frame_len(struct dma_desc *p, int rx_coe)
{
return (le32_to_cpu(p->des3) & RDES3_PACKET_SIZE_MASK);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_rd_enable_tx_timestamp(struct dma_desc *p)
{
p->des2 |= cpu_to_le32(TDES2_TIMESTAMP_ENABLE);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static int dwmac4_wrback_get_tx_timestamp_status(struct dma_desc *p)
{
/* Context type from W/B descriptor must be zero */
if (le32_to_cpu(p->des3) & TDES3_CONTEXT_TYPE)
return 0;
/* Tx Timestamp Status is 1 so des0 and des1'll have valid values */
if (le32_to_cpu(p->des3) & TDES3_TIMESTAMP_STATUS)
return 1;
return 0;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static inline void dwmac4_get_timestamp(void *desc, u32 ats, u64 *ts)
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
{
struct dma_desc *p = (struct dma_desc *)desc;
u64 ns;
ns = le32_to_cpu(p->des0);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
/* convert high/sec time stamp value to nanosecond */
ns += le32_to_cpu(p->des1) * 1000000000ULL;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
*ts = ns;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static int dwmac4_rx_check_timestamp(void *desc)
{
struct dma_desc *p = (struct dma_desc *)desc;
unsigned int rdes0 = le32_to_cpu(p->des0);
unsigned int rdes1 = le32_to_cpu(p->des1);
unsigned int rdes3 = le32_to_cpu(p->des3);
u32 own, ctxt;
int ret = 1;
own = rdes3 & RDES3_OWN;
ctxt = ((rdes3 & RDES3_CONTEXT_DESCRIPTOR)
>> RDES3_CONTEXT_DESCRIPTOR_SHIFT);
if (likely(!own && ctxt)) {
if ((rdes0 == 0xffffffff) && (rdes1 == 0xffffffff))
/* Corrupted value */
ret = -EINVAL;
else
/* A valid Timestamp is ready to be read */
ret = 0;
}
/* Timestamp not ready */
return ret;
}
static int dwmac4_wrback_get_rx_timestamp_status(void *desc, void *next_desc,
u32 ats)
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
{
struct dma_desc *p = (struct dma_desc *)desc;
int ret = -EINVAL;
/* Get the status from normal w/b descriptor */
if (likely(le32_to_cpu(p->des3) & RDES3_RDES1_VALID)) {
if (likely(le32_to_cpu(p->des1) & RDES1_TIMESTAMP_AVAILABLE)) {
int i = 0;
/* Check if timestamp is OK from context descriptor */
do {
ret = dwmac4_rx_check_timestamp(next_desc);
if (ret < 0)
goto exit;
i++;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
} while ((ret == 1) && (i < 10));
if (i == 10)
ret = -EBUSY;
}
}
exit:
if (likely(ret == 0))
return 1;
return 0;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic,
int mode, int end, int bfsize)
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
{
dwmac4_set_rx_owner(p, disable_rx_ic);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_rd_init_tx_desc(struct dma_desc *p, int mode, int end)
{
p->des0 = 0;
p->des1 = 0;
p->des2 = 0;
p->des3 = 0;
}
static void dwmac4_rd_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
bool csum_flag, int mode, bool tx_own,
bool ls, unsigned int tot_pkt_len)
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
{
unsigned int tdes3 = le32_to_cpu(p->des3);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
p->des2 |= cpu_to_le32(len & TDES2_BUFFER1_SIZE_MASK);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
tdes3 |= tot_pkt_len & TDES3_PACKET_SIZE_MASK;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
if (is_fs)
tdes3 |= TDES3_FIRST_DESCRIPTOR;
else
tdes3 &= ~TDES3_FIRST_DESCRIPTOR;
if (likely(csum_flag))
tdes3 |= (TX_CIC_FULL << TDES3_CHECKSUM_INSERTION_SHIFT);
else
tdes3 &= ~(TX_CIC_FULL << TDES3_CHECKSUM_INSERTION_SHIFT);
if (ls)
tdes3 |= TDES3_LAST_DESCRIPTOR;
else
tdes3 &= ~TDES3_LAST_DESCRIPTOR;
/* Finally set the OWN bit. Later the DMA will start! */
if (tx_own)
tdes3 |= TDES3_OWN;
if (is_fs && tx_own)
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
/* When the own bit, for the first frame, has to be set, all
* descriptors for the same frame has to be set before, to
* avoid race condition.
*/
dma_wmb();
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
p->des3 = cpu_to_le32(tdes3);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_rd_prepare_tso_tx_desc(struct dma_desc *p, int is_fs,
int len1, int len2, bool tx_own,
bool ls, unsigned int tcphdrlen,
unsigned int tcppayloadlen)
{
unsigned int tdes3 = le32_to_cpu(p->des3);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
if (len1)
p->des2 |= cpu_to_le32((len1 & TDES2_BUFFER1_SIZE_MASK));
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
if (len2)
p->des2 |= cpu_to_le32((len2 << TDES2_BUFFER2_SIZE_MASK_SHIFT)
& TDES2_BUFFER2_SIZE_MASK);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
if (is_fs) {
tdes3 |= TDES3_FIRST_DESCRIPTOR |
TDES3_TCP_SEGMENTATION_ENABLE |
((tcphdrlen << TDES3_HDR_LEN_SHIFT) &
TDES3_SLOT_NUMBER_MASK) |
((tcppayloadlen & TDES3_TCP_PKT_PAYLOAD_MASK));
} else {
tdes3 &= ~TDES3_FIRST_DESCRIPTOR;
}
if (ls)
tdes3 |= TDES3_LAST_DESCRIPTOR;
else
tdes3 &= ~TDES3_LAST_DESCRIPTOR;
/* Finally set the OWN bit. Later the DMA will start! */
if (tx_own)
tdes3 |= TDES3_OWN;
if (is_fs && tx_own)
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
/* When the own bit, for the first frame, has to be set, all
* descriptors for the same frame has to be set before, to
* avoid race condition.
*/
dma_wmb();
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
p->des3 = cpu_to_le32(tdes3);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_release_tx_desc(struct dma_desc *p, int mode)
{
p->des0 = 0;
p->des1 = 0;
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
p->des2 = 0;
p->des3 = 0;
}
static void dwmac4_rd_set_tx_ic(struct dma_desc *p)
{
p->des2 |= cpu_to_le32(TDES2_INTERRUPT_ON_COMPLETION);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_display_ring(void *head, unsigned int size, bool rx)
{
struct dma_desc *p = (struct dma_desc *)head;
int i;
pr_info("%s descriptor ring:\n", rx ? "RX" : "TX");
for (i = 0; i < size; i++) {
pr_info("%03d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
i, (unsigned int)virt_to_phys(p),
le32_to_cpu(p->des0), le32_to_cpu(p->des1),
le32_to_cpu(p->des2), le32_to_cpu(p->des3));
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
p++;
}
}
static void dwmac4_set_mss_ctxt(struct dma_desc *p, unsigned int mss)
{
p->des0 = 0;
p->des1 = 0;
p->des2 = cpu_to_le32(mss);
p->des3 = cpu_to_le32(TDES3_CONTEXT_TYPE | TDES3_CTXT_TCMSSV);
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
}
static void dwmac4_get_addr(struct dma_desc *p, unsigned int *addr)
{
*addr = le32_to_cpu(p->des0);
}
static void dwmac4_set_addr(struct dma_desc *p, dma_addr_t addr)
{
p->des0 = cpu_to_le32(addr);
p->des1 = 0;
}
static void dwmac4_clear(struct dma_desc *p)
{
p->des0 = 0;
p->des1 = 0;
p->des2 = 0;
p->des3 = 0;
}
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
const struct stmmac_desc_ops dwmac4_desc_ops = {
.tx_status = dwmac4_wrback_get_tx_status,
.rx_status = dwmac4_wrback_get_rx_status,
.get_tx_len = dwmac4_rd_get_tx_len,
.get_tx_owner = dwmac4_get_tx_owner,
.set_tx_owner = dwmac4_set_tx_owner,
.set_rx_owner = dwmac4_set_rx_owner,
.get_tx_ls = dwmac4_get_tx_ls,
.get_rx_frame_len = dwmac4_wrback_get_rx_frame_len,
.enable_tx_timestamp = dwmac4_rd_enable_tx_timestamp,
.get_tx_timestamp_status = dwmac4_wrback_get_tx_timestamp_status,
.get_rx_timestamp_status = dwmac4_wrback_get_rx_timestamp_status,
.get_timestamp = dwmac4_get_timestamp,
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
.set_tx_ic = dwmac4_rd_set_tx_ic,
.prepare_tx_desc = dwmac4_rd_prepare_tx_desc,
.prepare_tso_tx_desc = dwmac4_rd_prepare_tso_tx_desc,
.release_tx_desc = dwmac4_release_tx_desc,
.init_rx_desc = dwmac4_rd_init_rx_desc,
.init_tx_desc = dwmac4_rd_init_tx_desc,
.display_ring = dwmac4_display_ring,
.set_mss = dwmac4_set_mss_ctxt,
.get_addr = dwmac4_get_addr,
.set_addr = dwmac4_set_addr,
.clear = dwmac4_clear,
stmmac: add descriptors function for GMAC 4.xx One of main changes of GMAC 4.xx IP is descriptors management. -descriptors are only used in ring mode. -A descriptor is composed of 4 32bits registers (no more extended descriptors) -descriptor mechanism (Tx for example, but it is exactly the same for RX): -useful registers: -DMA_CH#_TxDesc_Ring_Len: length of transmit descriptor ring -DMA_CH#_TxDesc_List_Address: start address of the ring -DMA_CH#_TxDesc_Tail_Pointer: address of the last descriptor to send + 1. -DMA_CH#_TxDesc_Current_App_TxDesc: address of the current descriptor -The descriptor Tail Pointer register contains the pointer to the descriptor address (N). The base address and the current descriptor decide the address of the current descriptor that the DMA can process. The descriptors up to one location less than the one indicated by the descriptor tail pointer (N-1) are owned by the DMA. The DMA continues to process the descriptors until the following condition occurs: "current descriptor pointer == Descriptor Tail pointer" Then the DMA goes into suspend mode. The application must perform a write to descriptor tail pointer register and update the tail pointer to have the following condition and to start a new transfer: "current descriptor pointer < Descriptor tail pointer" The DMA automatically wraps around the base address when the end of ring is reached. -New features are available on IP: -TSO (TCP Segmentation Offload) for TX only -Split header: to have header and payload in 2 different buffers Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01 03:37:28 -06:00
};
const struct stmmac_mode_ops dwmac4_ring_mode_ops = { };