1
0
Fork 0
alistair23-linux/drivers/net/bonding/bond_options.c

1478 lines
42 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* drivers/net/bond/bond_options.c - bonding options
* Copyright (c) 2013 Jiri Pirko <jiri@resnulli.us>
* Copyright (c) 2013 Scott Feldman <sfeldma@cumulusnetworks.com>
*/
#include <linux/errno.h>
#include <linux/if.h>
#include <linux/netdevice.h>
#include <linux/spinlock.h>
#include <linux/rcupdate.h>
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
#include <linux/ctype.h>
#include <linux/inet.h>
#include <linux/sched/signal.h>
#include <net/bonding.h>
static int bond_option_active_slave_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_miimon_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_updelay_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_downdelay_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_peer_notif_delay_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_use_carrier_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_arp_interval_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target);
static int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target);
static int bond_option_arp_ip_targets_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_arp_validate_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_arp_all_targets_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_primary_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_primary_reselect_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_fail_over_mac_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_xmit_hash_policy_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_resend_igmp_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_num_peer_notif_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_all_slaves_active_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_min_links_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_lp_interval_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_pps_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_lacp_rate_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_ad_select_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_queue_id_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_mode_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_slaves_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_tlb_dynamic_lb_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_ad_actor_sys_prio_set(struct bonding *bond,
const struct bond_opt_value *newval);
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
static int bond_option_ad_actor_system_set(struct bonding *bond,
const struct bond_opt_value *newval);
static int bond_option_ad_user_port_key_set(struct bonding *bond,
const struct bond_opt_value *newval);
static const struct bond_opt_value bond_mode_tbl[] = {
{ "balance-rr", BOND_MODE_ROUNDROBIN, BOND_VALFLAG_DEFAULT},
{ "active-backup", BOND_MODE_ACTIVEBACKUP, 0},
{ "balance-xor", BOND_MODE_XOR, 0},
{ "broadcast", BOND_MODE_BROADCAST, 0},
{ "802.3ad", BOND_MODE_8023AD, 0},
{ "balance-tlb", BOND_MODE_TLB, 0},
{ "balance-alb", BOND_MODE_ALB, 0},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_pps_tbl[] = {
{ "default", 1, BOND_VALFLAG_DEFAULT},
{ "maxval", USHRT_MAX, BOND_VALFLAG_MAX},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_xmit_hashtype_tbl[] = {
{ "layer2", BOND_XMIT_POLICY_LAYER2, BOND_VALFLAG_DEFAULT},
{ "layer3+4", BOND_XMIT_POLICY_LAYER34, 0},
{ "layer2+3", BOND_XMIT_POLICY_LAYER23, 0},
{ "encap2+3", BOND_XMIT_POLICY_ENCAP23, 0},
{ "encap3+4", BOND_XMIT_POLICY_ENCAP34, 0},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_arp_validate_tbl[] = {
{ "none", BOND_ARP_VALIDATE_NONE, BOND_VALFLAG_DEFAULT},
{ "active", BOND_ARP_VALIDATE_ACTIVE, 0},
{ "backup", BOND_ARP_VALIDATE_BACKUP, 0},
{ "all", BOND_ARP_VALIDATE_ALL, 0},
{ "filter", BOND_ARP_FILTER, 0},
{ "filter_active", BOND_ARP_FILTER_ACTIVE, 0},
{ "filter_backup", BOND_ARP_FILTER_BACKUP, 0},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_arp_all_targets_tbl[] = {
{ "any", BOND_ARP_TARGETS_ANY, BOND_VALFLAG_DEFAULT},
{ "all", BOND_ARP_TARGETS_ALL, 0},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_fail_over_mac_tbl[] = {
{ "none", BOND_FOM_NONE, BOND_VALFLAG_DEFAULT},
{ "active", BOND_FOM_ACTIVE, 0},
{ "follow", BOND_FOM_FOLLOW, 0},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_intmax_tbl[] = {
{ "off", 0, BOND_VALFLAG_DEFAULT},
{ "maxval", INT_MAX, BOND_VALFLAG_MAX},
{ NULL, -1, 0}
};
static const struct bond_opt_value bond_lacp_rate_tbl[] = {
{ "slow", AD_LACP_SLOW, 0},
{ "fast", AD_LACP_FAST, 0},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_ad_select_tbl[] = {
{ "stable", BOND_AD_STABLE, BOND_VALFLAG_DEFAULT},
{ "bandwidth", BOND_AD_BANDWIDTH, 0},
{ "count", BOND_AD_COUNT, 0},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_num_peer_notif_tbl[] = {
{ "off", 0, 0},
{ "maxval", 255, BOND_VALFLAG_MAX},
{ "default", 1, BOND_VALFLAG_DEFAULT},
{ NULL, -1, 0}
};
static const struct bond_opt_value bond_primary_reselect_tbl[] = {
{ "always", BOND_PRI_RESELECT_ALWAYS, BOND_VALFLAG_DEFAULT},
{ "better", BOND_PRI_RESELECT_BETTER, 0},
{ "failure", BOND_PRI_RESELECT_FAILURE, 0},
{ NULL, -1},
};
static const struct bond_opt_value bond_use_carrier_tbl[] = {
{ "off", 0, 0},
{ "on", 1, BOND_VALFLAG_DEFAULT},
{ NULL, -1, 0}
};
static const struct bond_opt_value bond_all_slaves_active_tbl[] = {
{ "off", 0, BOND_VALFLAG_DEFAULT},
{ "on", 1, 0},
{ NULL, -1, 0}
};
static const struct bond_opt_value bond_resend_igmp_tbl[] = {
{ "off", 0, 0},
{ "maxval", 255, BOND_VALFLAG_MAX},
{ "default", 1, BOND_VALFLAG_DEFAULT},
{ NULL, -1, 0}
};
static const struct bond_opt_value bond_lp_interval_tbl[] = {
{ "minval", 1, BOND_VALFLAG_MIN | BOND_VALFLAG_DEFAULT},
{ "maxval", INT_MAX, BOND_VALFLAG_MAX},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_tlb_dynamic_lb_tbl[] = {
{ "off", 0, 0},
{ "on", 1, BOND_VALFLAG_DEFAULT},
{ NULL, -1, 0}
};
static const struct bond_opt_value bond_ad_actor_sys_prio_tbl[] = {
{ "minval", 1, BOND_VALFLAG_MIN},
{ "maxval", 65535, BOND_VALFLAG_MAX | BOND_VALFLAG_DEFAULT},
{ NULL, -1, 0},
};
static const struct bond_opt_value bond_ad_user_port_key_tbl[] = {
{ "minval", 0, BOND_VALFLAG_MIN | BOND_VALFLAG_DEFAULT},
{ "maxval", 1023, BOND_VALFLAG_MAX},
{ NULL, -1, 0},
};
static const struct bond_option bond_opts[BOND_OPT_LAST] = {
[BOND_OPT_MODE] = {
.id = BOND_OPT_MODE,
.name = "mode",
.desc = "bond device mode",
.flags = BOND_OPTFLAG_NOSLAVES | BOND_OPTFLAG_IFDOWN,
.values = bond_mode_tbl,
.set = bond_option_mode_set
},
[BOND_OPT_PACKETS_PER_SLAVE] = {
.id = BOND_OPT_PACKETS_PER_SLAVE,
.name = "packets_per_slave",
.desc = "Packets to send per slave in RR mode",
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_ROUNDROBIN)),
.values = bond_pps_tbl,
.set = bond_option_pps_set
},
[BOND_OPT_XMIT_HASH] = {
.id = BOND_OPT_XMIT_HASH,
.name = "xmit_hash_policy",
.desc = "balance-xor, 802.3ad, and tlb hashing method",
.values = bond_xmit_hashtype_tbl,
.set = bond_option_xmit_hash_policy_set
},
[BOND_OPT_ARP_VALIDATE] = {
.id = BOND_OPT_ARP_VALIDATE,
.name = "arp_validate",
.desc = "validate src/dst of ARP probes",
.unsuppmodes = BIT(BOND_MODE_8023AD) | BIT(BOND_MODE_TLB) |
BIT(BOND_MODE_ALB),
.values = bond_arp_validate_tbl,
.set = bond_option_arp_validate_set
},
[BOND_OPT_ARP_ALL_TARGETS] = {
.id = BOND_OPT_ARP_ALL_TARGETS,
.name = "arp_all_targets",
.desc = "fail on any/all arp targets timeout",
.values = bond_arp_all_targets_tbl,
.set = bond_option_arp_all_targets_set
},
[BOND_OPT_FAIL_OVER_MAC] = {
.id = BOND_OPT_FAIL_OVER_MAC,
.name = "fail_over_mac",
.desc = "For active-backup, do not set all slaves to the same MAC",
.flags = BOND_OPTFLAG_NOSLAVES,
.values = bond_fail_over_mac_tbl,
.set = bond_option_fail_over_mac_set
},
[BOND_OPT_ARP_INTERVAL] = {
.id = BOND_OPT_ARP_INTERVAL,
.name = "arp_interval",
.desc = "arp interval in milliseconds",
.unsuppmodes = BIT(BOND_MODE_8023AD) | BIT(BOND_MODE_TLB) |
BIT(BOND_MODE_ALB),
.values = bond_intmax_tbl,
.set = bond_option_arp_interval_set
},
[BOND_OPT_ARP_TARGETS] = {
.id = BOND_OPT_ARP_TARGETS,
.name = "arp_ip_target",
.desc = "arp targets in n.n.n.n form",
.flags = BOND_OPTFLAG_RAWVAL,
.set = bond_option_arp_ip_targets_set
},
[BOND_OPT_DOWNDELAY] = {
.id = BOND_OPT_DOWNDELAY,
.name = "downdelay",
.desc = "Delay before considering link down, in milliseconds",
.values = bond_intmax_tbl,
.set = bond_option_downdelay_set
},
[BOND_OPT_UPDELAY] = {
.id = BOND_OPT_UPDELAY,
.name = "updelay",
.desc = "Delay before considering link up, in milliseconds",
.values = bond_intmax_tbl,
.set = bond_option_updelay_set
},
[BOND_OPT_LACP_RATE] = {
.id = BOND_OPT_LACP_RATE,
.name = "lacp_rate",
.desc = "LACPDU tx rate to request from 802.3ad partner",
.flags = BOND_OPTFLAG_IFDOWN,
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)),
.values = bond_lacp_rate_tbl,
.set = bond_option_lacp_rate_set
},
[BOND_OPT_MINLINKS] = {
.id = BOND_OPT_MINLINKS,
.name = "min_links",
.desc = "Minimum number of available links before turning on carrier",
.values = bond_intmax_tbl,
.set = bond_option_min_links_set
},
[BOND_OPT_AD_SELECT] = {
.id = BOND_OPT_AD_SELECT,
.name = "ad_select",
.desc = "803.ad aggregation selection logic",
.flags = BOND_OPTFLAG_IFDOWN,
.values = bond_ad_select_tbl,
.set = bond_option_ad_select_set
},
[BOND_OPT_NUM_PEER_NOTIF] = {
.id = BOND_OPT_NUM_PEER_NOTIF,
.name = "num_unsol_na",
.desc = "Number of peer notifications to send on failover event",
.values = bond_num_peer_notif_tbl,
.set = bond_option_num_peer_notif_set
},
[BOND_OPT_MIIMON] = {
.id = BOND_OPT_MIIMON,
.name = "miimon",
.desc = "Link check interval in milliseconds",
.values = bond_intmax_tbl,
.set = bond_option_miimon_set
},
[BOND_OPT_PRIMARY] = {
.id = BOND_OPT_PRIMARY,
.name = "primary",
.desc = "Primary network device to use",
.flags = BOND_OPTFLAG_RAWVAL,
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_ACTIVEBACKUP) |
BIT(BOND_MODE_TLB) |
BIT(BOND_MODE_ALB)),
.set = bond_option_primary_set
},
[BOND_OPT_PRIMARY_RESELECT] = {
.id = BOND_OPT_PRIMARY_RESELECT,
.name = "primary_reselect",
.desc = "Reselect primary slave once it comes up",
.values = bond_primary_reselect_tbl,
.set = bond_option_primary_reselect_set
},
[BOND_OPT_USE_CARRIER] = {
.id = BOND_OPT_USE_CARRIER,
.name = "use_carrier",
.desc = "Use netif_carrier_ok (vs MII ioctls) in miimon",
.values = bond_use_carrier_tbl,
.set = bond_option_use_carrier_set
},
[BOND_OPT_ACTIVE_SLAVE] = {
.id = BOND_OPT_ACTIVE_SLAVE,
.name = "active_slave",
.desc = "Currently active slave",
.flags = BOND_OPTFLAG_RAWVAL,
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_ACTIVEBACKUP) |
BIT(BOND_MODE_TLB) |
BIT(BOND_MODE_ALB)),
.set = bond_option_active_slave_set
},
[BOND_OPT_QUEUE_ID] = {
.id = BOND_OPT_QUEUE_ID,
.name = "queue_id",
.desc = "Set queue id of a slave",
.flags = BOND_OPTFLAG_RAWVAL,
.set = bond_option_queue_id_set
},
[BOND_OPT_ALL_SLAVES_ACTIVE] = {
.id = BOND_OPT_ALL_SLAVES_ACTIVE,
.name = "all_slaves_active",
.desc = "Keep all frames received on an interface by setting active flag for all slaves",
.values = bond_all_slaves_active_tbl,
.set = bond_option_all_slaves_active_set
},
[BOND_OPT_RESEND_IGMP] = {
.id = BOND_OPT_RESEND_IGMP,
.name = "resend_igmp",
.desc = "Number of IGMP membership reports to send on link failure",
.values = bond_resend_igmp_tbl,
.set = bond_option_resend_igmp_set
},
[BOND_OPT_LP_INTERVAL] = {
.id = BOND_OPT_LP_INTERVAL,
.name = "lp_interval",
.desc = "The number of seconds between instances where the bonding driver sends learning packets to each slave's peer switch",
.values = bond_lp_interval_tbl,
.set = bond_option_lp_interval_set
},
[BOND_OPT_SLAVES] = {
.id = BOND_OPT_SLAVES,
.name = "slaves",
.desc = "Slave membership management",
.flags = BOND_OPTFLAG_RAWVAL,
.set = bond_option_slaves_set
},
[BOND_OPT_TLB_DYNAMIC_LB] = {
.id = BOND_OPT_TLB_DYNAMIC_LB,
.name = "tlb_dynamic_lb",
.desc = "Enable dynamic flow shuffling",
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_TLB) | BIT(BOND_MODE_ALB)),
.values = bond_tlb_dynamic_lb_tbl,
.flags = BOND_OPTFLAG_IFDOWN,
.set = bond_option_tlb_dynamic_lb_set,
},
[BOND_OPT_AD_ACTOR_SYS_PRIO] = {
.id = BOND_OPT_AD_ACTOR_SYS_PRIO,
.name = "ad_actor_sys_prio",
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)),
.values = bond_ad_actor_sys_prio_tbl,
.set = bond_option_ad_actor_sys_prio_set,
},
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
[BOND_OPT_AD_ACTOR_SYSTEM] = {
.id = BOND_OPT_AD_ACTOR_SYSTEM,
.name = "ad_actor_system",
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)),
.flags = BOND_OPTFLAG_RAWVAL,
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
.set = bond_option_ad_actor_system_set,
},
[BOND_OPT_AD_USER_PORT_KEY] = {
.id = BOND_OPT_AD_USER_PORT_KEY,
.name = "ad_user_port_key",
.unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)),
.flags = BOND_OPTFLAG_IFDOWN,
.values = bond_ad_user_port_key_tbl,
.set = bond_option_ad_user_port_key_set,
},
[BOND_OPT_NUM_PEER_NOTIF_ALIAS] = {
.id = BOND_OPT_NUM_PEER_NOTIF_ALIAS,
.name = "num_grat_arp",
.desc = "Number of peer notifications to send on failover event",
.values = bond_num_peer_notif_tbl,
.set = bond_option_num_peer_notif_set
},
[BOND_OPT_PEER_NOTIF_DELAY] = {
.id = BOND_OPT_PEER_NOTIF_DELAY,
.name = "peer_notif_delay",
.desc = "Delay between each peer notification on failover event, in milliseconds",
.values = bond_intmax_tbl,
.set = bond_option_peer_notif_delay_set
}
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
};
/* Searches for an option by name */
const struct bond_option *bond_opt_get_by_name(const char *name)
{
const struct bond_option *opt;
int option;
for (option = 0; option < BOND_OPT_LAST; option++) {
opt = bond_opt_get(option);
if (opt && !strcmp(opt->name, name))
return opt;
}
return NULL;
}
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
/* Searches for a value in opt's values[] table */
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val)
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
{
const struct bond_option *opt;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
int i;
opt = bond_opt_get(option);
if (WARN_ON(!opt))
return NULL;
for (i = 0; opt->values && opt->values[i].string; i++)
if (opt->values[i].value == val)
return &opt->values[i];
return NULL;
}
/* Searches for a value in opt's values[] table which matches the flagmask */
static const struct bond_opt_value *bond_opt_get_flags(const struct bond_option *opt,
u32 flagmask)
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
{
int i;
for (i = 0; opt->values && opt->values[i].string; i++)
if (opt->values[i].flags & flagmask)
return &opt->values[i];
return NULL;
}
/* If maxval is missing then there's no range to check. In case minval is
* missing then it's considered to be 0.
*/
static bool bond_opt_check_range(const struct bond_option *opt, u64 val)
{
const struct bond_opt_value *minval, *maxval;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
minval = bond_opt_get_flags(opt, BOND_VALFLAG_MIN);
maxval = bond_opt_get_flags(opt, BOND_VALFLAG_MAX);
if (!maxval || (minval && val < minval->value) || val > maxval->value)
return false;
return true;
}
/**
* bond_opt_parse - parse option value
* @opt: the option to parse against
* @val: value to parse
*
* This function tries to extract the value from @val and check if it's
* a possible match for the option and returns NULL if a match isn't found,
* or the struct_opt_value that matched. It also strips the new line from
* @val->string if it's present.
*/
const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
struct bond_opt_value *val)
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
{
char *p, valstr[BOND_OPT_MAX_NAMELEN + 1] = { 0, };
const struct bond_opt_value *tbl;
const struct bond_opt_value *ret = NULL;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
bool checkval;
int i, rv;
/* No parsing if the option wants a raw val */
if (opt->flags & BOND_OPTFLAG_RAWVAL)
return val;
tbl = opt->values;
if (!tbl)
goto out;
/* ULLONG_MAX is used to bypass string processing */
checkval = val->value != ULLONG_MAX;
if (!checkval) {
if (!val->string)
goto out;
p = strchr(val->string, '\n');
if (p)
*p = '\0';
for (p = val->string; *p; p++)
if (!(isdigit(*p) || isspace(*p)))
break;
/* The following code extracts the string to match or the value
* and sets checkval appropriately
*/
if (*p) {
rv = sscanf(val->string, "%32s", valstr);
} else {
rv = sscanf(val->string, "%llu", &val->value);
checkval = true;
}
if (!rv)
goto out;
}
for (i = 0; tbl[i].string; i++) {
/* Check for exact match */
if (checkval) {
if (val->value == tbl[i].value)
ret = &tbl[i];
} else {
if (!strcmp(valstr, "default") &&
(tbl[i].flags & BOND_VALFLAG_DEFAULT))
ret = &tbl[i];
if (!strcmp(valstr, tbl[i].string))
ret = &tbl[i];
}
/* Found an exact match */
if (ret)
goto out;
}
/* Possible range match */
if (checkval && bond_opt_check_range(opt, val->value))
ret = val;
out:
return ret;
}
/* Check opt's dependencies against bond mode and currently set options */
static int bond_opt_check_deps(struct bonding *bond,
const struct bond_option *opt)
{
struct bond_params *params = &bond->params;
if (test_bit(params->mode, &opt->unsuppmodes))
return -EACCES;
if ((opt->flags & BOND_OPTFLAG_NOSLAVES) && bond_has_slaves(bond))
return -ENOTEMPTY;
if ((opt->flags & BOND_OPTFLAG_IFDOWN) && (bond->dev->flags & IFF_UP))
return -EBUSY;
return 0;
}
static void bond_opt_dep_print(struct bonding *bond,
const struct bond_option *opt)
{
const struct bond_opt_value *modeval;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
struct bond_params *params;
params = &bond->params;
modeval = bond_opt_get_val(BOND_OPT_MODE, params->mode);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
if (test_bit(params->mode, &opt->unsuppmodes))
netdev_err(bond->dev, "option %s: mode dependency failed, not supported in mode %s(%llu)\n",
opt->name, modeval->string, modeval->value);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
}
static void bond_opt_error_interpret(struct bonding *bond,
const struct bond_option *opt,
int error, const struct bond_opt_value *val)
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
{
const struct bond_opt_value *minval, *maxval;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
char *p;
switch (error) {
case -EINVAL:
if (val) {
if (val->string) {
/* sometimes RAWVAL opts may have new lines */
p = strchr(val->string, '\n');
if (p)
*p = '\0';
netdev_err(bond->dev, "option %s: invalid value (%s)\n",
opt->name, val->string);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
} else {
netdev_err(bond->dev, "option %s: invalid value (%llu)\n",
opt->name, val->value);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
}
}
minval = bond_opt_get_flags(opt, BOND_VALFLAG_MIN);
maxval = bond_opt_get_flags(opt, BOND_VALFLAG_MAX);
if (!maxval)
break;
netdev_err(bond->dev, "option %s: allowed values %llu - %llu\n",
opt->name, minval ? minval->value : 0, maxval->value);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
break;
case -EACCES:
bond_opt_dep_print(bond, opt);
break;
case -ENOTEMPTY:
netdev_err(bond->dev, "option %s: unable to set because the bond device has slaves\n",
opt->name);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
break;
case -EBUSY:
netdev_err(bond->dev, "option %s: unable to set because the bond device is up\n",
opt->name);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
break;
default:
break;
}
}
/**
* __bond_opt_set - set a bonding option
* @bond: target bond device
* @option: option to set
* @val: value to set it to
*
* This function is used to change the bond's option value, it can be
* used for both enabling/changing an option and for disabling it. RTNL lock
* must be obtained before calling this function.
*/
int __bond_opt_set(struct bonding *bond,
unsigned int option, struct bond_opt_value *val)
{
const struct bond_opt_value *retval = NULL;
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
const struct bond_option *opt;
int ret = -ENOENT;
ASSERT_RTNL();
opt = bond_opt_get(option);
if (WARN_ON(!val) || WARN_ON(!opt))
goto out;
ret = bond_opt_check_deps(bond, opt);
if (ret)
goto out;
retval = bond_opt_parse(opt, val);
if (!retval) {
ret = -EINVAL;
goto out;
}
ret = opt->set(bond, retval);
out:
if (ret)
bond_opt_error_interpret(bond, opt, ret, val);
return ret;
}
/**
* __bond_opt_set_notify - set a bonding option
* @bond: target bond device
* @option: option to set
* @val: value to set it to
*
* This function is used to change the bond's option value and trigger
* a notification to user sapce. It can be used for both enabling/changing
* an option and for disabling it. RTNL lock must be obtained before calling
* this function.
*/
int __bond_opt_set_notify(struct bonding *bond,
unsigned int option, struct bond_opt_value *val)
{
int ret = -ENOENT;
ASSERT_RTNL();
ret = __bond_opt_set(bond, option, val);
if (!ret && (bond->dev->reg_state == NETREG_REGISTERED))
call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
return ret;
}
/**
* bond_opt_tryset_rtnl - try to acquire rtnl and call __bond_opt_set
* @bond: target bond device
* @option: option to set
* @buf: value to set it to
*
* This function tries to acquire RTNL without blocking and if successful
* calls __bond_opt_set. It is mainly used for sysfs option manipulation.
*/
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf)
{
struct bond_opt_value optval;
int ret;
if (!rtnl_trylock())
return restart_syscall();
bond_opt_initstr(&optval, buf);
ret = __bond_opt_set_notify(bond, option, &optval);
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
rtnl_unlock();
return ret;
}
/**
* bond_opt_get - get a pointer to an option
* @option: option for which to return a pointer
*
* This function checks if option is valid and if so returns a pointer
* to its entry in the bond_opts[] option array.
*/
const struct bond_option *bond_opt_get(unsigned int option)
bonding: add infrastructure for an option API This patch adds the necessary basic infrastructure to support centralized and unified option manipulation API for the bonding. The new structure bond_option will be used to describe each option with its dependencies on modes which will be checked automatically thus removing a lot of duplicated code. Also automatic range checking is added for some options. Currently the option setting function requires RTNL to be acquired prior to calling it, since many options already rely on RTNL it seemed like the best choice to protect all against common race conditions. In order to add an option the following steps need to be done: 1. Add an entry BOND_OPT_<option> to bond_options.h so it gets a unique id and a bit corresponding to the id 2. Add a bond_option entry to the bond_opts[] array in bond_options.c which describes the option, its dependencies and its manipulation function 3. Add code to export the option through sysfs and/or as a module parameter (the sysfs export will be made automatically in the future) The options can have different flags set, currently the following are supported: BOND_OPTFLAG_NOSLAVES - require that the bond device has no slaves prior to setting the option BOND_OPTFLAG_IFDOWN - require that the bond device is down prior to setting the option BOND_OPTFLAG_RAWVAL - don't parse the value but return it raw for the option to parse There's a new value structure to describe different types of values which can have the following flags: BOND_VALFLAG_DEFAULT - marks the default option (permanent string alias to this option is "default") BOND_VALFLAG_MIN - the minimum value that this option can have BOND_VALFLAG_MAX - the maximum value that this option can have An example would be nice here, so if we have an option which can have the values "off"(2), "special"(4, default) and supports a range, say 16 - 32, it should be defined as follows: "off", 2, "special", 4, BOND_VALFLAG_DEFAULT, "rangemin", 16, BOND_VALFLAG_MIN, "rangemax", 32, BOND_VALFLAG_MAX So we have the valid intervals: [2, 2], [4, 4], [16, 32] Also the valid strings: "off" = 2, "special" and "default" = 4 "rangemin" = 16, "rangemax" = 32 BOND_VALFLAG_(MIN|MAX) can be used to specify a valid range for an option, if MIN is omitted then 0 is considered as a minimum. If an exact match is found in the values[] table it will be returned, otherwise the range is tried (if available). The option parameter passing is done by using a special structure called bond_opt_value which can take either a string or a value to parse. One of the bond_opt_init(val|str) macros should be used depending on which one does the user want to parse (string or value). Then a call to __bond_opt_set should be done under RTNL. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22 06:53:16 -07:00
{
if (!BOND_OPT_VALID(option))
return NULL;
return &bond_opts[option];
}
static int bond_option_mode_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
bonding: set default miimon value for non-arp modes if not set For some time now, if you load the bonding driver and configure bond parameters via sysfs using minimal config options, such as specifying nothing but the mode, relying on defaults for everything else, modes that cannot use arp monitoring (802.3ad, balance-tlb, balance-alb) all wind up with both arp_interval=0 (as it should be) and miimon=0, which means the miimon monitor thread never actually runs. This is particularly problematic for 802.3ad. For example, from an LNST recipe I've set up: $ modprobe bonding max_bonds=0" $ echo "+t_bond0" > /sys/class/net/bonding_masters" $ ip link set t_bond0 down" $ echo "802.3ad" > /sys/class/net/t_bond0/bonding/mode" $ ip link set ens1f1 down" $ echo "+ens1f1" > /sys/class/net/t_bond0/bonding/slaves" $ ip link set ens1f0 down" $ echo "+ens1f0" > /sys/class/net/t_bond0/bonding/slaves" $ ethtool -i t_bond0" $ ip link set ens1f1 up" $ ip link set ens1f0 up" $ ip link set t_bond0 up" $ ip addr add 192.168.9.1/24 dev t_bond0" $ ip addr add 2002::1/64 dev t_bond0" This bond comes up okay, but things look slightly suspect in /proc/net/bonding/t_bond0 output: $ grep -i mii /proc/net/bonding/t_bond0 MII Status: up MII Polling Interval (ms): 0 MII Status: up MII Status: up Now, pull a cable on one of the ports in the bond, then reconnect it, and you'll see: Slave Interface: ens1f0 MII Status: down Speed: 1000 Mbps Duplex: full I believe this became a major issue as of commit 4d2c0cda0744, which for 802.3ad bonds, sets slave->link = BOND_LINK_DOWN, with a comment about relying on link monitoring via miimon to set it correctly, but since the miimon work queue never runs, the link just stays marked down. If we simply tweak bond_option_mode_set() slightly, we can check for the non-arp modes having no miimon value set, and insert BOND_DEFAULT_MIIMON, which gets things back in full working order. This problem exists as far back as 4.14, and might be worth fixing in all stable trees since, though the work-around is to simply specify an miimon value yourself. Reported-by: Bob Ball <ball@umich.edu> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18 12:49:36 -06:00
if (!bond_mode_uses_arp(newval->value)) {
if (bond->params.arp_interval) {
netdev_dbg(bond->dev, "%s mode is incompatible with arp monitoring, start mii monitoring\n",
newval->string);
/* disable arp monitoring */
bond->params.arp_interval = 0;
}
if (!bond->params.miimon) {
/* set miimon to default value */
bond->params.miimon = BOND_DEFAULT_MIIMON;
netdev_dbg(bond->dev, "Setting MII monitoring interval to %d\n",
bond->params.miimon);
}
}
net: bonding: Fix transmit load balancing in balance-alb mode if specified by sysfs Commit cbf5ecb30560 ("net: bonding: Fix transmit load balancing in balance-alb mode") tried to fix transmit dynamic load balancing in balance-alb mode, which wasn't working after commit 8b426dc54cf4 ("bonding: remove hardcoded value"). It turned out that my previous patch only fixed the case when balance-alb was specified as bonding module parameter, and not when balance-alb mode was set using /sys/class/net/*/bonding/mode (the most common usage). In the latter case, tlb_dynamic_lb was set up according to the default mode of the bonding interface, which happens to be balance-rr. This additional patch addresses this issue by setting up tlb_dynamic_lb to 1 if "mode" is set to balance-alb through the sysfs interface. I didn't add code to change tlb_balance_lb back to the default value for other modes, because "mode" is usually set up only once during initialization, and it's not worthwhile to change the static variable bonding_defaults in bond_main.c to a global variable just for this purpose. Commit 8b426dc54cf4 also changes the value of tlb_dynamic_lb for balance-tlb mode if it is set up using the sysfs interface. I didn't change that behavior, because the value of tlb_balance_lb can be changed using the sysfs interface for balance-tlb, and I didn't like changing the default value back and forth for balance-tlb. As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be written to. However, I think balance-alb with tlb_dynamic_lb set to 0 is not an intended usage, so there is little use making it writable at this moment. Fixes: 8b426dc54cf4 ("bonding: remove hardcoded value") Reported-by: Reinis Rozitis <r@roze.lv> Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-06 16:47:59 -06:00
if (newval->value == BOND_MODE_ALB)
bond->params.tlb_dynamic_lb = 1;
/* don't cache arp_validate between modes */
bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
bond->params.mode = newval->value;
return 0;
}
static int bond_option_active_slave_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
char ifname[IFNAMSIZ] = { 0, };
struct net_device *slave_dev;
int ret = 0;
sscanf(newval->string, "%15s", ifname); /* IFNAMSIZ */
if (!strlen(ifname) || newval->string[0] == '\n') {
slave_dev = NULL;
} else {
slave_dev = __dev_get_by_name(dev_net(bond->dev), ifname);
if (!slave_dev)
return -ENODEV;
}
if (slave_dev) {
if (!netif_is_bond_slave(slave_dev)) {
slave_err(bond->dev, slave_dev, "Device is not bonding slave\n");
return -EINVAL;
}
if (bond->dev != netdev_master_upper_dev_get(slave_dev)) {
slave_err(bond->dev, slave_dev, "Device is not our slave\n");
return -EINVAL;
}
}
block_netpoll_tx();
/* check to see if we are clearing active */
if (!slave_dev) {
netdev_dbg(bond->dev, "Clearing current active slave\n");
RCU_INIT_POINTER(bond->curr_active_slave, NULL);
bond_select_active_slave(bond);
} else {
struct slave *old_active = rtnl_dereference(bond->curr_active_slave);
struct slave *new_active = bond_slave_get_rtnl(slave_dev);
BUG_ON(!new_active);
if (new_active == old_active) {
/* do nothing */
slave_dbg(bond->dev, new_active->dev, "is already the current active slave\n");
} else {
if (old_active && (new_active->link == BOND_LINK_UP) &&
bond_slave_is_up(new_active)) {
slave_dbg(bond->dev, new_active->dev, "Setting as active slave\n");
bond_change_active_slave(bond, new_active);
} else {
slave_err(bond->dev, new_active->dev, "Could not set as active slave; either %s is down or the link is down\n",
new_active->dev->name);
ret = -EINVAL;
}
}
}
unblock_netpoll_tx();
return ret;
}
/* There are two tricky bits here. First, if MII monitoring is activated, then
* we must disable ARP monitoring. Second, if the timer isn't running, we must
* start it.
*/
static int bond_option_miimon_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting MII monitoring interval to %llu\n",
newval->value);
bond->params.miimon = newval->value;
if (bond->params.updelay)
netdev_dbg(bond->dev, "Note: Updating updelay (to %d) since it is a multiple of the miimon value\n",
bond->params.updelay * bond->params.miimon);
if (bond->params.downdelay)
netdev_dbg(bond->dev, "Note: Updating downdelay (to %d) since it is a multiple of the miimon value\n",
bond->params.downdelay * bond->params.miimon);
if (bond->params.peer_notif_delay)
netdev_dbg(bond->dev, "Note: Updating peer_notif_delay (to %d) since it is a multiple of the miimon value\n",
bond->params.peer_notif_delay * bond->params.miimon);
if (newval->value && bond->params.arp_interval) {
netdev_dbg(bond->dev, "MII monitoring cannot be used with ARP monitoring - disabling ARP monitoring...\n");
bond->params.arp_interval = 0;
if (bond->params.arp_validate)
bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
* the MII timer. If the interface is down, the
* timer will get fired off when the open function
* is called.
*/
if (!newval->value) {
cancel_delayed_work_sync(&bond->mii_work);
} else {
cancel_delayed_work_sync(&bond->arp_work);
queue_delayed_work(bond->wq, &bond->mii_work, 0);
}
}
return 0;
}
/* Set up, down and peer notification delays. These must be multiples
* of the MII monitoring value, and are stored internally as the
* multiplier. Thus, we must translate to MS for the real world.
*/
static int _bond_option_delay_set(struct bonding *bond,
const struct bond_opt_value *newval,
const char *name,
int *target)
{
int value = newval->value;
if (!bond->params.miimon) {
netdev_err(bond->dev, "Unable to set %s as MII monitoring is disabled\n",
name);
return -EPERM;
}
if ((value % bond->params.miimon) != 0) {
netdev_warn(bond->dev,
"%s (%d) is not a multiple of miimon (%d), value rounded to %d ms\n",
name,
value, bond->params.miimon,
(value / bond->params.miimon) *
bond->params.miimon);
}
*target = value / bond->params.miimon;
netdev_dbg(bond->dev, "Setting %s to %d\n",
name,
*target * bond->params.miimon);
return 0;
}
static int bond_option_updelay_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
return _bond_option_delay_set(bond, newval, "up delay",
&bond->params.updelay);
}
static int bond_option_downdelay_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
return _bond_option_delay_set(bond, newval, "down delay",
&bond->params.downdelay);
}
static int bond_option_peer_notif_delay_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
int ret = _bond_option_delay_set(bond, newval,
"peer notification delay",
&bond->params.peer_notif_delay);
return ret;
}
static int bond_option_use_carrier_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting use_carrier to %llu\n",
newval->value);
bond->params.use_carrier = newval->value;
return 0;
}
/* There are two tricky bits here. First, if ARP monitoring is activated, then
* we must disable MII monitoring. Second, if the ARP timer isn't running,
* we must start it.
*/
static int bond_option_arp_interval_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting ARP monitoring interval to %llu\n",
newval->value);
bond->params.arp_interval = newval->value;
if (newval->value) {
if (bond->params.miimon) {
netdev_dbg(bond->dev, "ARP monitoring cannot be used with MII monitoring. Disabling MII monitoring\n");
bond->params.miimon = 0;
}
if (!bond->params.arp_targets[0])
netdev_dbg(bond->dev, "ARP monitoring has been set up, but no ARP targets have been specified\n");
}
if (bond->dev->flags & IFF_UP) {
/* If the interface is up, we may need to fire off
* the ARP timer. If the interface is down, the
* timer will get fired off when the open function
* is called.
*/
if (!newval->value) {
if (bond->params.arp_validate)
bond->recv_probe = NULL;
cancel_delayed_work_sync(&bond->arp_work);
} else {
/* arp_validate can be set only in active-backup mode */
bond->recv_probe = bond_arp_rcv;
cancel_delayed_work_sync(&bond->mii_work);
queue_delayed_work(bond->wq, &bond->arp_work, 0);
}
}
return 0;
}
static void _bond_options_arp_ip_target_set(struct bonding *bond, int slot,
__be32 target,
unsigned long last_rx)
{
__be32 *targets = bond->params.arp_targets;
struct list_head *iter;
struct slave *slave;
if (slot >= 0 && slot < BOND_MAX_ARP_TARGETS) {
bond_for_each_slave(bond, slave, iter)
slave->target_last_arp_rx[slot] = last_rx;
targets[slot] = target;
}
}
static int _bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
{
__be32 *targets = bond->params.arp_targets;
int ind;
if (!bond_is_ip_target_ok(target)) {
netdev_err(bond->dev, "invalid ARP target %pI4 specified for addition\n",
&target);
return -EINVAL;
}
if (bond_get_targets_ip(targets, target) != -1) { /* dup */
netdev_err(bond->dev, "ARP target %pI4 is already present\n",
&target);
return -EINVAL;
}
ind = bond_get_targets_ip(targets, 0); /* first free slot */
if (ind == -1) {
netdev_err(bond->dev, "ARP target table is full!\n");
return -EINVAL;
}
netdev_dbg(bond->dev, "Adding ARP target %pI4\n", &target);
_bond_options_arp_ip_target_set(bond, ind, target, jiffies);
return 0;
}
static int bond_option_arp_ip_target_add(struct bonding *bond, __be32 target)
{
return _bond_option_arp_ip_target_add(bond, target);
}
static int bond_option_arp_ip_target_rem(struct bonding *bond, __be32 target)
{
__be32 *targets = bond->params.arp_targets;
struct list_head *iter;
struct slave *slave;
unsigned long *targets_rx;
int ind, i;
if (!bond_is_ip_target_ok(target)) {
netdev_err(bond->dev, "invalid ARP target %pI4 specified for removal\n",
&target);
return -EINVAL;
}
ind = bond_get_targets_ip(targets, target);
if (ind == -1) {
netdev_err(bond->dev, "unable to remove nonexistent ARP target %pI4\n",
&target);
return -EINVAL;
}
if (ind == 0 && !targets[1] && bond->params.arp_interval)
netdev_warn(bond->dev, "Removing last arp target with arp_interval on\n");
netdev_dbg(bond->dev, "Removing ARP target %pI4\n", &target);
bond_for_each_slave(bond, slave, iter) {
targets_rx = slave->target_last_arp_rx;
for (i = ind; (i < BOND_MAX_ARP_TARGETS-1) && targets[i+1]; i++)
targets_rx[i] = targets_rx[i+1];
targets_rx[i] = 0;
}
for (i = ind; (i < BOND_MAX_ARP_TARGETS-1) && targets[i+1]; i++)
targets[i] = targets[i+1];
targets[i] = 0;
return 0;
}
void bond_option_arp_ip_targets_clear(struct bonding *bond)
{
int i;
for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
_bond_options_arp_ip_target_set(bond, i, 0, 0);
}
static int bond_option_arp_ip_targets_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
int ret = -EPERM;
__be32 target;
if (newval->string) {
if (!in4_pton(newval->string+1, -1, (u8 *)&target, -1, NULL)) {
netdev_err(bond->dev, "invalid ARP target %pI4 specified\n",
&target);
return ret;
}
if (newval->string[0] == '+')
ret = bond_option_arp_ip_target_add(bond, target);
else if (newval->string[0] == '-')
ret = bond_option_arp_ip_target_rem(bond, target);
else
netdev_err(bond->dev, "no command found in arp_ip_targets file - use +<addr> or -<addr>\n");
} else {
target = newval->value;
ret = bond_option_arp_ip_target_add(bond, target);
}
return ret;
}
static int bond_option_arp_validate_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting arp_validate to %s (%llu)\n",
newval->string, newval->value);
bond->params.arp_validate = newval->value;
return 0;
}
static int bond_option_arp_all_targets_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting arp_all_targets to %s (%llu)\n",
newval->string, newval->value);
bond->params.arp_all_targets = newval->value;
return 0;
}
static int bond_option_primary_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
char *p, *primary = newval->string;
struct list_head *iter;
struct slave *slave;
block_netpoll_tx();
p = strchr(primary, '\n');
if (p)
*p = '\0';
/* check to see if we are clearing primary */
if (!strlen(primary)) {
netdev_dbg(bond->dev, "Setting primary slave to None\n");
RCU_INIT_POINTER(bond->primary_slave, NULL);
memset(bond->params.primary, 0, sizeof(bond->params.primary));
bond_select_active_slave(bond);
goto out;
}
bond_for_each_slave(bond, slave, iter) {
if (strncmp(slave->dev->name, primary, IFNAMSIZ) == 0) {
slave_dbg(bond->dev, slave->dev, "Setting as primary slave\n");
rcu_assign_pointer(bond->primary_slave, slave);
strcpy(bond->params.primary, slave->dev->name);
bond->force_primary = true;
bond_select_active_slave(bond);
goto out;
}
}
if (rtnl_dereference(bond->primary_slave)) {
netdev_dbg(bond->dev, "Setting primary slave to None\n");
RCU_INIT_POINTER(bond->primary_slave, NULL);
bond_select_active_slave(bond);
}
strncpy(bond->params.primary, primary, IFNAMSIZ);
bond->params.primary[IFNAMSIZ - 1] = 0;
netdev_dbg(bond->dev, "Recording %s as primary, but it has not been enslaved yet\n",
primary);
out:
unblock_netpoll_tx();
return 0;
}
static int bond_option_primary_reselect_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting primary_reselect to %s (%llu)\n",
newval->string, newval->value);
bond->params.primary_reselect = newval->value;
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
return 0;
}
static int bond_option_fail_over_mac_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting fail_over_mac to %s (%llu)\n",
newval->string, newval->value);
bond->params.fail_over_mac = newval->value;
return 0;
}
static int bond_option_xmit_hash_policy_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting xmit hash policy to %s (%llu)\n",
newval->string, newval->value);
bond->params.xmit_policy = newval->value;
return 0;
}
static int bond_option_resend_igmp_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting resend_igmp to %llu\n",
newval->value);
bond->params.resend_igmp = newval->value;
return 0;
}
static int bond_option_num_peer_notif_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
bond->params.num_peer_notif = newval->value;
return 0;
}
static int bond_option_all_slaves_active_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
struct list_head *iter;
struct slave *slave;
if (newval->value == bond->params.all_slaves_active)
return 0;
bond->params.all_slaves_active = newval->value;
bond_for_each_slave(bond, slave, iter) {
if (!bond_is_active_slave(slave)) {
if (newval->value)
slave->inactive = 0;
else
slave->inactive = 1;
}
}
return 0;
}
static int bond_option_min_links_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting min links value to %llu\n",
newval->value);
bond->params.min_links = newval->value;
bond_set_carrier(bond);
return 0;
}
static int bond_option_lp_interval_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
bond->params.lp_interval = newval->value;
return 0;
}
static int bond_option_pps_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting packets per slave to %llu\n",
newval->value);
bond->params.packets_per_slave = newval->value;
if (newval->value > 0) {
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21 18:29:41 -07:00
bond->params.reciprocal_packets_per_slave =
reciprocal_value(newval->value);
reciprocal_divide: update/correction of the algorithm Jakub Zawadzki noticed that some divisions by reciprocal_divide() were not correct [1][2], which he could also show with BPF code after divisions are transformed into reciprocal_value() for runtime invariance which can be passed to reciprocal_divide() later on; reverse in BPF dump ended up with a different, off-by-one K in some situations. This has been fixed by Eric Dumazet in commit aee636c4809fa5 ("bpf: do not use reciprocal divide"). This follow-up patch improves reciprocal_value() and reciprocal_divide() to work in all cases by using Granlund and Montgomery method, so that also future use is safe and without any non-obvious side-effects. Known problems with the old implementation were that division by 1 always returned 0 and some off-by-ones when the dividend and divisor where very large. This seemed to not be problematic with its current users, as far as we can tell. Eric Dumazet checked for the slab usage, we cannot surely say so in the case of flex_array. Still, in order to fix that, we propose an extension from the original implementation from commit 6a2d7a955d8d resp. [3][4], by using the algorithm proposed in "Division by Invariant Integers Using Multiplication" [5], Torbjörn Granlund and Peter L. Montgomery, that is, pseudocode for q = n/d where q, n, d is in u32 universe: 1) Initialization: int l = ceil(log_2 d) uword m' = floor((1<<32)*((1<<l)-d)/d)+1 int sh_1 = min(l,1) int sh_2 = max(l-1,0) 2) For q = n/d, all uword: uword t = (n*m')>>32 q = (t+((n-t)>>sh_1))>>sh_2 The assembler implementation from Agner Fog [6] also helped a lot while implementing. We have tested the implementation on x86_64, ppc64, i686, s390x; on x86_64/haswell we're still half the latency compared to normal divide. Joint work with Daniel Borkmann. [1] http://www.wireshark.org/~darkjames/reciprocal-buggy.c [2] http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c [3] https://gmplib.org/~tege/division-paper.pdf [4] http://homepage.cs.uiowa.edu/~jones/bcd/divide.html [5] http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.1.2556 [6] http://www.agner.org/optimize/asmlib.zip Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: Jesse Gross <jesse@nicira.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21 18:29:41 -07:00
} else {
/* reciprocal_packets_per_slave is unused if
* packets_per_slave is 0 or 1, just initialize it
*/
bond->params.reciprocal_packets_per_slave =
(struct reciprocal_value) { 0 };
}
return 0;
}
static int bond_option_lacp_rate_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting LACP rate to %s (%llu)\n",
newval->string, newval->value);
bond->params.lacp_fast = newval->value;
bond_3ad_update_lacp_rate(bond);
return 0;
}
static int bond_option_ad_select_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting ad_select to %s (%llu)\n",
newval->string, newval->value);
bond->params.ad_select = newval->value;
return 0;
}
static int bond_option_queue_id_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
struct slave *slave, *update_slave;
struct net_device *sdev;
struct list_head *iter;
char *delim;
int ret = 0;
u16 qid;
/* delim will point to queue id if successful */
delim = strchr(newval->string, ':');
if (!delim)
goto err_no_cmd;
/* Terminate string that points to device name and bump it
* up one, so we can read the queue id there.
*/
*delim = '\0';
if (sscanf(++delim, "%hd\n", &qid) != 1)
goto err_no_cmd;
/* Check buffer length, valid ifname and queue id */
if (!dev_valid_name(newval->string) ||
qid > bond->dev->real_num_tx_queues)
goto err_no_cmd;
/* Get the pointer to that interface if it exists */
sdev = __dev_get_by_name(dev_net(bond->dev), newval->string);
if (!sdev)
goto err_no_cmd;
/* Search for thes slave and check for duplicate qids */
update_slave = NULL;
bond_for_each_slave(bond, slave, iter) {
if (sdev == slave->dev)
/* We don't need to check the matching
* slave for dups, since we're overwriting it
*/
update_slave = slave;
else if (qid && qid == slave->queue_id) {
goto err_no_cmd;
}
}
if (!update_slave)
goto err_no_cmd;
/* Actually set the qids for the slave */
update_slave->queue_id = qid;
out:
return ret;
err_no_cmd:
netdev_dbg(bond->dev, "invalid input for queue_id set\n");
ret = -EPERM;
goto out;
}
static int bond_option_slaves_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
char command[IFNAMSIZ + 1] = { 0, };
struct net_device *dev;
char *ifname;
int ret;
sscanf(newval->string, "%16s", command); /* IFNAMSIZ*/
ifname = command + 1;
if ((strlen(command) <= 1) ||
(command[0] != '+' && command[0] != '-') ||
!dev_valid_name(ifname))
goto err_no_cmd;
dev = __dev_get_by_name(dev_net(bond->dev), ifname);
if (!dev) {
netdev_dbg(bond->dev, "interface %s does not exist!\n",
ifname);
ret = -ENODEV;
goto out;
}
switch (command[0]) {
case '+':
slave_dbg(bond->dev, dev, "Enslaving interface\n");
ret = bond_enslave(bond->dev, dev, NULL);
break;
case '-':
slave_dbg(bond->dev, dev, "Releasing interface\n");
ret = bond_release(bond->dev, dev);
bonding: add missing netdev_update_lockdep_key() [ Upstream commit 064ff66e2bef84f1153087612032b5b9eab005bd ] After bond_release(), netdev_update_lockdep_key() should be called. But both ioctl path and attribute path don't call netdev_update_lockdep_key(). This patch adds missing netdev_update_lockdep_key(). Test commands: ip link add bond0 type bond ip link add bond1 type bond ifenslave bond0 bond1 ifenslave -d bond0 bond1 ifenslave bond1 bond0 Splat looks like: [ 29.501182][ T1046] WARNING: possible circular locking dependency detected [ 29.501945][ T1039] hardirqs last disabled at (1962): [<ffffffffac6c807f>] handle_mm_fault+0x13f/0x700 [ 29.503442][ T1046] 5.5.0+ #322 Not tainted [ 29.503447][ T1046] ------------------------------------------------------ [ 29.504277][ T1039] softirqs last enabled at (1180): [<ffffffffade00678>] __do_softirq+0x678/0x981 [ 29.505443][ T1046] ifenslave/1046 is trying to acquire lock: [ 29.505886][ T1039] softirqs last disabled at (1169): [<ffffffffac19c18a>] irq_exit+0x17a/0x1a0 [ 29.509997][ T1046] ffff88805d5da280 (&dev->addr_list_lock_key#3){+...}, at: dev_mc_sync_multiple+0x95/0x120 [ 29.511243][ T1046] [ 29.511243][ T1046] but task is already holding lock: [ 29.512192][ T1046] ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding] [ 29.514124][ T1046] [ 29.514124][ T1046] which lock already depends on the new lock. [ 29.514124][ T1046] [ 29.517297][ T1046] [ 29.517297][ T1046] the existing dependency chain (in reverse order) is: [ 29.518231][ T1046] [ 29.518231][ T1046] -> #1 (&dev->addr_list_lock_key#4){+...}: [ 29.519076][ T1046] _raw_spin_lock+0x30/0x70 [ 29.519588][ T1046] dev_mc_sync_multiple+0x95/0x120 [ 29.520208][ T1046] bond_enslave+0x448d/0x47b0 [bonding] [ 29.520862][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding] [ 29.521640][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding] [ 29.522438][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding] [ 29.523251][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding] [ 29.524082][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding] [ 29.524959][ T1046] kernfs_fop_write+0x276/0x410 [ 29.525620][ T1046] vfs_write+0x197/0x4a0 [ 29.526218][ T1046] ksys_write+0x141/0x1d0 [ 29.526818][ T1046] do_syscall_64+0x99/0x4f0 [ 29.527430][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.528265][ T1046] [ 29.528265][ T1046] -> #0 (&dev->addr_list_lock_key#3){+...}: [ 29.529272][ T1046] __lock_acquire+0x2d8d/0x3de0 [ 29.529935][ T1046] lock_acquire+0x164/0x3b0 [ 29.530638][ T1046] _raw_spin_lock+0x30/0x70 [ 29.531187][ T1046] dev_mc_sync_multiple+0x95/0x120 [ 29.531790][ T1046] bond_enslave+0x448d/0x47b0 [bonding] [ 29.532451][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding] [ 29.533163][ T1046] __bond_opt_set+0x1ff/0xbb0 [bonding] [ 29.533789][ T1046] __bond_opt_set_notify+0x2b/0xf0 [bonding] [ 29.534595][ T1046] bond_opt_tryset_rtnl+0x92/0xf0 [bonding] [ 29.535500][ T1046] bonding_sysfs_store_option+0x8a/0xf0 [bonding] [ 29.536379][ T1046] kernfs_fop_write+0x276/0x410 [ 29.537057][ T1046] vfs_write+0x197/0x4a0 [ 29.537640][ T1046] ksys_write+0x141/0x1d0 [ 29.538251][ T1046] do_syscall_64+0x99/0x4f0 [ 29.538870][ T1046] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 29.539659][ T1046] [ 29.539659][ T1046] other info that might help us debug this: [ 29.539659][ T1046] [ 29.540953][ T1046] Possible unsafe locking scenario: [ 29.540953][ T1046] [ 29.541883][ T1046] CPU0 CPU1 [ 29.542540][ T1046] ---- ---- [ 29.543209][ T1046] lock(&dev->addr_list_lock_key#4); [ 29.543880][ T1046] lock(&dev->addr_list_lock_key#3); [ 29.544873][ T1046] lock(&dev->addr_list_lock_key#4); [ 29.545863][ T1046] lock(&dev->addr_list_lock_key#3); [ 29.546525][ T1046] [ 29.546525][ T1046] *** DEADLOCK *** [ 29.546525][ T1046] [ 29.547542][ T1046] 5 locks held by ifenslave/1046: [ 29.548196][ T1046] #0: ffff88806044c478 (sb_writers#5){.+.+}, at: vfs_write+0x3bb/0x4a0 [ 29.549248][ T1046] #1: ffff88805af00890 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cf/0x410 [ 29.550343][ T1046] #2: ffff88805b8b54b0 (kn->count#157){.+.+}, at: kernfs_fop_write+0x1f2/0x410 [ 29.551575][ T1046] #3: ffffffffaecf4cf0 (rtnl_mutex){+.+.}, at: bond_opt_tryset_rtnl+0x5f/0xf0 [bonding] [ 29.552819][ T1046] #4: ffff8880460f2280 (&dev->addr_list_lock_key#4){+...}, at: bond_enslave+0x4482/0x47b0 [bonding] [ 29.554175][ T1046] [ 29.554175][ T1046] stack backtrace: [ 29.554907][ T1046] CPU: 0 PID: 1046 Comm: ifenslave Not tainted 5.5.0+ #322 [ 29.555854][ T1046] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 29.557064][ T1046] Call Trace: [ 29.557504][ T1046] dump_stack+0x96/0xdb [ 29.558054][ T1046] check_noncircular+0x371/0x450 [ 29.558723][ T1046] ? print_circular_bug.isra.35+0x310/0x310 [ 29.559486][ T1046] ? hlock_class+0x130/0x130 [ 29.560100][ T1046] ? __lock_acquire+0x2d8d/0x3de0 [ 29.560761][ T1046] __lock_acquire+0x2d8d/0x3de0 [ 29.561366][ T1046] ? register_lock_class+0x14d0/0x14d0 [ 29.562045][ T1046] ? find_held_lock+0x39/0x1d0 [ 29.562641][ T1046] lock_acquire+0x164/0x3b0 [ 29.563199][ T1046] ? dev_mc_sync_multiple+0x95/0x120 [ 29.563872][ T1046] _raw_spin_lock+0x30/0x70 [ 29.564464][ T1046] ? dev_mc_sync_multiple+0x95/0x120 [ 29.565146][ T1046] dev_mc_sync_multiple+0x95/0x120 [ 29.565793][ T1046] bond_enslave+0x448d/0x47b0 [bonding] [ 29.566487][ T1046] ? bond_update_slave_arr+0x940/0x940 [bonding] [ 29.567279][ T1046] ? bstr_printf+0xc20/0xc20 [ 29.567857][ T1046] ? stack_trace_consume_entry+0x160/0x160 [ 29.568614][ T1046] ? deactivate_slab.isra.77+0x2c5/0x800 [ 29.569320][ T1046] ? check_chain_key+0x236/0x5d0 [ 29.569939][ T1046] ? sscanf+0x93/0xc0 [ 29.570442][ T1046] ? vsscanf+0x1e20/0x1e20 [ 29.571003][ T1046] bond_option_slaves_set+0x1a3/0x370 [bonding] [ ... ] Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15 03:50:08 -07:00
if (!ret)
netdev_update_lockdep_key(dev);
break;
default:
/* should not run here. */
goto err_no_cmd;
}
out:
return ret;
err_no_cmd:
netdev_err(bond->dev, "no command found in slaves file - use +ifname or -ifname\n");
ret = -EPERM;
goto out;
}
static int bond_option_tlb_dynamic_lb_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting dynamic-lb to %s (%llu)\n",
newval->string, newval->value);
bond->params.tlb_dynamic_lb = newval->value;
return 0;
}
static int bond_option_ad_actor_sys_prio_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting ad_actor_sys_prio to %llu\n",
newval->value);
bond->params.ad_actor_sys_prio = newval->value;
bond_3ad_update_ad_actor_settings(bond);
return 0;
}
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
static int bond_option_ad_actor_system_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
u8 macaddr[ETH_ALEN];
u8 *mac;
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
if (newval->string) {
if (!mac_pton(newval->string, macaddr))
goto err;
mac = macaddr;
} else {
mac = (u8 *)&newval->value;
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
}
if (!is_valid_ether_addr(mac))
goto err;
netdev_dbg(bond->dev, "Setting ad_actor_system to %pM\n", mac);
ether_addr_copy(bond->params.ad_actor_system, mac);
bond_3ad_update_ad_actor_settings(bond);
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
return 0;
err:
netdev_err(bond->dev, "Invalid ad_actor_system MAC address.\n");
return -EINVAL;
bonding: Allow userspace to set actors' macaddr in an AD-system. In an AD system, the communication between actor and partner is the business between these two entities. In the current setup anyone on the same L2 can "guess" the LACPDU contents and then possibly send the spoofed LACPDUs and trick the partner causing connectivity issues for the AD system. This patch allows to use a random mac-address obscuring it's identity making it harder for someone in the L2 is do the same thing. This patch allows user-space to choose the mac-address for the AD-system. This mac-address can not be NULL or a Multicast. If the mac-address is set from user-space; kernel will honor it and will not overwrite it. In the absence (value from user space); the logic will default to using the masters' mac as the mac-address for the AD-system. It can be set using example code below - # modprobe bonding mode=4 # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \ $(( (RANDOM & 0xFE) | 0x02 )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF )) \ $(( RANDOM & 0xFF ))) # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system # echo +eth1 > /sys/class/net/bond0/bonding/slaves ... # ip link set bond0 up Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com> [jt: fixed up style issues reported by checkpatch] Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 01:01:56 -06:00
}
static int bond_option_ad_user_port_key_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
netdev_dbg(bond->dev, "Setting ad_user_port_key to %llu\n",
newval->value);
bond->params.ad_user_port_key = newval->value;
return 0;
}