alistair23-linux/arch/x86/mm/numa_32.c

493 lines
14 KiB
C
Raw Normal View History

/*
* Written by: Patricia Gaughen <gone@us.ibm.com>, IBM Corporation
* August 2002: added remote node KVA remap - Martin J. Bligh
*
* Copyright (C) 2002, IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/mm.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/mmzone.h>
#include <linux/highmem.h>
#include <linux/initrd.h>
#include <linux/nodemask.h>
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/pfn.h>
#include <linux/swap.h>
#include <linux/acpi.h>
#include <asm/e820.h>
#include <asm/setup.h>
#include <asm/mmzone.h>
#include <asm/bios_ebda.h>
#include <asm/proto.h>
/*
* numa interface - we expect the numa architecture specific code to have
* populated the following initialisation.
*
* 1) node_online_map - the map of all nodes configured (online) in the system
* 2) node_start_pfn - the starting page frame number for a node
* 3) node_end_pfn - the ending page fram number for a node
*/
unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
#ifdef CONFIG_DISCONTIGMEM
/*
* 4) physnode_map - the mapping between a pfn and owning node
* physnode_map keeps track of the physical memory layout of a generic
* numa node on a 64Mb break (each element of the array will
* represent 64Mb of memory and will be marked by the node id. so,
* if the first gig is on node 0, and the second gig is on node 1
* physnode_map will contain:
*
* physnode_map[0-15] = 0;
* physnode_map[16-31] = 1;
* physnode_map[32- ] = -1;
*/
s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
EXPORT_SYMBOL(physnode_map);
void memory_present(int nid, unsigned long start, unsigned long end)
{
unsigned long pfn;
printk(KERN_INFO "Node: %d, start_pfn: %lx, end_pfn: %lx\n",
nid, start, end);
printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
printk(KERN_DEBUG " ");
for (pfn = start; pfn < end; pfn += PAGES_PER_ELEMENT) {
physnode_map[pfn / PAGES_PER_ELEMENT] = nid;
printk(KERN_CONT "%lx ", pfn);
}
printk(KERN_CONT "\n");
}
unsigned long node_memmap_size_bytes(int nid, unsigned long start_pfn,
unsigned long end_pfn)
{
unsigned long nr_pages = end_pfn - start_pfn;
if (!nr_pages)
return 0;
return (nr_pages + 1) * sizeof(struct page);
}
#endif
extern unsigned long find_max_low_pfn(void);
extern unsigned long highend_pfn, highstart_pfn;
#define LARGE_PAGE_BYTES (PTRS_PER_PTE * PAGE_SIZE)
static void *node_remap_start_vaddr[MAX_NUMNODES];
void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
/*
* FLAT - support for basic PC memory model with discontig enabled, essentially
* a single node with all available processors in it with a flat
* memory map.
*/
static int __init get_memcfg_numa_flat(void)
{
printk(KERN_DEBUG "NUMA - single node, flat memory mode\n");
node_start_pfn[0] = 0;
node_end_pfn[0] = max_pfn;
memblock_x86_register_active_regions(0, 0, max_pfn);
/* Indicate there is one node available. */
nodes_clear(node_online_map);
node_set_online(0);
return 1;
}
/*
* Find the highest page frame number we have available for the node
*/
static void __init propagate_e820_map_node(int nid)
{
if (node_end_pfn[nid] > max_pfn)
node_end_pfn[nid] = max_pfn;
/*
* if a user has given mem=XXXX, then we need to make sure
* that the node _starts_ before that, too, not just ends
*/
if (node_start_pfn[nid] > max_pfn)
node_start_pfn[nid] = max_pfn;
BUG_ON(node_start_pfn[nid] > node_end_pfn[nid]);
}
/*
* Allocate memory for the pg_data_t for this node via a crude pre-bootmem
* method. For node zero take this from the bottom of memory, for
* subsequent nodes place them at node_remap_start_vaddr which contains
* node local data in physically node local memory. See setup_memory()
* for details.
*/
static void __init allocate_pgdat(int nid)
{
char buf[16];
NODE_DATA(nid) = alloc_remap(nid, ALIGN(sizeof(pg_data_t), PAGE_SIZE));
if (!NODE_DATA(nid)) {
unsigned long pgdat_phys;
pgdat_phys = memblock_find_in_range(min_low_pfn<<PAGE_SHIFT,
max_pfn_mapped<<PAGE_SHIFT,
sizeof(pg_data_t),
PAGE_SIZE);
NODE_DATA(nid) = (pg_data_t *)(pfn_to_kaddr(pgdat_phys>>PAGE_SHIFT));
memset(buf, 0, sizeof(buf));
sprintf(buf, "NODE_DATA %d", nid);
memblock_x86_reserve_range(pgdat_phys, pgdat_phys + sizeof(pg_data_t), buf);
}
printk(KERN_DEBUG "allocate_pgdat: node %d NODE_DATA %08lx\n",
nid, (unsigned long)NODE_DATA(nid));
}
/*
* Remap memory allocator
*/
static unsigned long node_remap_start_pfn[MAX_NUMNODES];
static void *node_remap_end_vaddr[MAX_NUMNODES];
static void *node_remap_alloc_vaddr[MAX_NUMNODES];
/**
* alloc_remap - Allocate remapped memory
* @nid: NUMA node to allocate memory from
* @size: The size of allocation
*
* Allocate @size bytes from the remap area of NUMA node @nid. The
* size of the remap area is predetermined by init_alloc_remap() and
* only the callers considered there should call this function. For
* more info, please read the comment on top of init_alloc_remap().
*
* The caller must be ready to handle allocation failure from this
* function and fall back to regular memory allocator in such cases.
*
* CONTEXT:
* Single CPU early boot context.
*
* RETURNS:
* Pointer to the allocated memory on success, %NULL on failure.
*/
void *alloc_remap(int nid, unsigned long size)
{
void *allocation = node_remap_alloc_vaddr[nid];
size = ALIGN(size, L1_CACHE_BYTES);
if (!allocation || (allocation + size) > node_remap_end_vaddr[nid])
return NULL;
node_remap_alloc_vaddr[nid] += size;
memset(allocation, 0, size);
return allocation;
}
#ifdef CONFIG_HIBERNATION
/**
* resume_map_numa_kva - add KVA mapping to the temporary page tables created
* during resume from hibernation
* @pgd_base - temporary resume page directory
*/
void resume_map_numa_kva(pgd_t *pgd_base)
{
int node;
for_each_online_node(node) {
unsigned long start_va, start_pfn, nr_pages, pfn;
start_va = (unsigned long)node_remap_start_vaddr[node];
start_pfn = node_remap_start_pfn[node];
nr_pages = (node_remap_end_vaddr[node] -
node_remap_start_vaddr[node]) >> PAGE_SHIFT;
printk(KERN_DEBUG "%s: node %d\n", __func__, node);
for (pfn = 0; pfn < nr_pages; pfn += PTRS_PER_PTE) {
unsigned long vaddr = start_va + (pfn << PAGE_SHIFT);
pgd_t *pgd = pgd_base + pgd_index(vaddr);
pud_t *pud = pud_offset(pgd, vaddr);
pmd_t *pmd = pmd_offset(pud, vaddr);
set_pmd(pmd, pfn_pmd(start_pfn + pfn,
PAGE_KERNEL_LARGE_EXEC));
printk(KERN_DEBUG "%s: %08lx -> pfn %08lx\n",
__func__, vaddr, start_pfn + pfn);
}
}
}
#endif
/**
* init_alloc_remap - Initialize remap allocator for a NUMA node
* @nid: NUMA node to initizlie remap allocator for
*
* NUMA nodes may end up without any lowmem. As allocating pgdat and
* memmap on a different node with lowmem is inefficient, a special
* remap allocator is implemented which can be used by alloc_remap().
*
* For each node, the amount of memory which will be necessary for
* pgdat and memmap is calculated and two memory areas of the size are
* allocated - one in the node and the other in lowmem; then, the area
* in the node is remapped to the lowmem area.
*
* As pgdat and memmap must be allocated in lowmem anyway, this
* doesn't waste lowmem address space; however, the actual lowmem
* which gets remapped over is wasted. The amount shouldn't be
* problematic on machines this feature will be used.
*
* Initialization failure isn't fatal. alloc_remap() is used
* opportunistically and the callers will fall back to other memory
* allocation mechanisms on failure.
*/
void __init init_alloc_remap(int nid, u64 start, u64 end)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long end_pfn = end >> PAGE_SHIFT;
unsigned long size, pfn;
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
u64 node_pa, remap_pa;
void *remap_va;
/*
* The acpi/srat node info can show hot-add memroy zones where
* memory could be added but not currently present.
*/
printk(KERN_DEBUG "node %d pfn: [%lx - %lx]\n",
nid, start_pfn, end_pfn);
/* calculate the necessary space aligned to large page size */
size = node_memmap_size_bytes(nid, start_pfn, end_pfn);
size += ALIGN(sizeof(pg_data_t), PAGE_SIZE);
size = ALIGN(size, LARGE_PAGE_BYTES);
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
/* allocate node memory and the lowmem remap area */
node_pa = memblock_find_in_range(start, end, size, LARGE_PAGE_BYTES);
if (node_pa == MEMBLOCK_ERROR) {
pr_warning("remap_alloc: failed to allocate %lu bytes for node %d\n",
size, nid);
return;
}
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
memblock_x86_reserve_range(node_pa, node_pa + size, "KVA RAM");
remap_pa = memblock_find_in_range(min_low_pfn << PAGE_SHIFT,
max_low_pfn << PAGE_SHIFT,
size, LARGE_PAGE_BYTES);
if (remap_pa == MEMBLOCK_ERROR) {
pr_warning("remap_alloc: failed to allocate %lu bytes remap area for node %d\n",
size, nid);
memblock_x86_free_range(node_pa, node_pa + size);
return;
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
}
memblock_x86_reserve_range(remap_pa, remap_pa + size, "KVA PG");
remap_va = phys_to_virt(remap_pa);
/* perform actual remap */
for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE)
set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT),
(node_pa >> PAGE_SHIFT) + pfn,
PAGE_KERNEL_LARGE);
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
/* initialize remap allocator parameters */
node_remap_start_pfn[nid] = node_pa >> PAGE_SHIFT;
node_remap_start_vaddr[nid] = remap_va;
node_remap_end_vaddr[nid] = remap_va + size;
node_remap_alloc_vaddr[nid] = remap_va;
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
printk(KERN_DEBUG "remap_alloc: node %d [%08llx-%08llx) -> [%p-%p)\n",
nid, node_pa, node_pa + size, remap_va, remap_va + size);
}
static int get_memcfg_numaq(void)
{
#ifdef CONFIG_X86_NUMAQ
int nid;
if (numa_off)
return 0;
if (numaq_numa_init() < 0) {
nodes_clear(numa_nodes_parsed);
remove_all_active_ranges();
return 0;
}
for_each_node_mask(nid, numa_nodes_parsed)
node_set_online(nid);
sort_node_map();
return 1;
#else
return 0;
#endif
}
x86-32, NUMA: Replace srat_32.c with srat.c SRAT support implementation in srat_32.c and srat.c are generally similar; however, there are some differences. First of all, 64bit implementation supports more types of SRAT entries. 64bit supports x2apic, affinity, memory and SLIT. 32bit only supports processor and memory. Most other differences stem from different initialization protocols employed by 64bit and 32bit NUMA init paths. On 64bit, * Mappings among PXM, node and apicid are directly done in each SRAT entry callback. * Memory affinity information is passed to numa_add_memblk() which takes care of all interfacing with NUMA init. * Doesn't directly initialize NUMA configurations. All the information is recorded in numa_nodes_parsed and memblks. On 32bit, * Checks numa_off. * Things go through one more level of indirection via private tables but eventually end up initializing the same mappings. * node_start/end_pfn[] are initialized and memblock_x86_register_active_regions() is called for each memory chunk. * node_set_online() is called for each online node. * sort_node_map() is called. There are also other minor differences in sanity checking and messages but taking 64bit version should be good enough. This patch drops the 32bit specific implementation and makes the 64bit implementation common for both 32 and 64bit. The init protocol differences are dealt with in two places - the numa_add_memblk() shim added in the previous patch and new temporary numa_32.c:get_memcfg_from_srat() which wraps invocation of x86_acpi_numa_init(). The shim numa_add_memblk() handles the folowings. * node_start/end_pfn[] initialization. * node_set_online() for memory nodes. * Invocation of memblock_x86_register_active_regions(). The shim get_memcfg_from_srat() handles the followings. * numa_off check. * node_set_online() for CPU nodes. * sort_node_map() invocation. * Clearing of numa_nodes_parsed and active_ranges on failure. The shims are temporary and will be removed as the generic NUMA init path in 32bit is replaced with 64bit one. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02 06:18:53 -06:00
static int get_memcfg_from_srat(void)
{
#ifdef CONFIG_ACPI_NUMA
int nid;
if (numa_off)
return 0;
if (x86_acpi_numa_init() < 0) {
nodes_clear(numa_nodes_parsed);
remove_all_active_ranges();
return 0;
}
for_each_node_mask(nid, numa_nodes_parsed)
node_set_online(nid);
sort_node_map();
return 1;
#else
return 0;
#endif
}
static void get_memcfg_numa(void)
{
if (get_memcfg_numaq())
return;
if (get_memcfg_from_srat())
return;
get_memcfg_numa_flat();
}
void __init initmem_init(void)
{
int nid;
get_memcfg_numa();
numa_init_array();
for_each_online_node(nid) {
u64 start = (u64)node_start_pfn[nid] << PAGE_SHIFT;
u64 end = min((u64)node_end_pfn[nid] << PAGE_SHIFT,
(u64)max_pfn << PAGE_SHIFT);
if (start < end)
init_alloc_remap(nid, start, end);
}
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
#ifdef CONFIG_HIGHMEM
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > max_low_pfn)
highstart_pfn = max_low_pfn;
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
num_physpages = highend_pfn;
high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
#else
num_physpages = max_low_pfn;
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
#endif
printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
pages_to_mb(max_low_pfn));
printk(KERN_DEBUG "max_low_pfn = %lx, highstart_pfn = %lx\n",
max_low_pfn, highstart_pfn);
printk(KERN_DEBUG "Low memory ends at vaddr %08lx\n",
(ulong) pfn_to_kaddr(max_low_pfn));
x86-32, numa: Move lowmem address space reservation to init_alloc_remap() Remap alloc init is done in the following stages. 1. init_alloc_remap() calculates how much memory is necessary for each node and reserves node local memory. 2. initmem_init() collects how much each node needs and reserves a single contiguous lowmem area which can contain all. 3. init_remap_allocator() initializes allocator parameters from the determined lowmem address and per-node offsets. 4. Actual remap happens. There is no reason for the lowmem remap area to be reserved as a single contiguous area at one go. They don't interact with each other and the memblock allocator will put them side-by-side anyway. This patch breaks up the single lowmem address reservation and put per-node lowmem address reservation into init_alloc_remap() and initializes allocator parameters directly in the function as all the addresses are determined there. This merges steps 2 and 3 into 1. While at it, remove now largely irrelevant comments in init_alloc_remap(). This change causes the following behavior changes. * Remap lowmem areas are allocated in smaller per-node chunks. * Remap lowmem area reservation failure fail future remap allocations instead of panicking. * Remap allocator initialization is less verbose. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-10-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-04-04 16:23:55 -06:00
for_each_online_node(nid)
allocate_pgdat(nid);
printk(KERN_DEBUG "High memory starts at vaddr %08lx\n",
(ulong) pfn_to_kaddr(highstart_pfn));
for_each_online_node(nid)
propagate_e820_map_node(nid);
for_each_online_node(nid) {
memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
NODE_DATA(nid)->node_id = nid;
}
setup_bootmem_allocator();
}
#ifdef CONFIG_MEMORY_HOTPLUG
static int paddr_to_nid(u64 addr)
{
int nid;
unsigned long pfn = PFN_DOWN(addr);
for_each_node(nid)
if (node_start_pfn[nid] <= pfn &&
pfn < node_end_pfn[nid])
return nid;
return -1;
}
/*
* This function is used to ask node id BEFORE memmap and mem_section's
* initialization (pfn_to_nid() can't be used yet).
* If _PXM is not defined on ACPI's DSDT, node id must be found by this.
*/
int memory_add_physaddr_to_nid(u64 addr)
{
int nid = paddr_to_nid(addr);
return (nid >= 0) ? nid : 0;
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
/* temporary shim, will go away soon */
int __init numa_add_memblk(int nid, u64 start, u64 end)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long end_pfn = end >> PAGE_SHIFT;
printk(KERN_DEBUG "nid %d start_pfn %08lx end_pfn %08lx\n",
nid, start_pfn, end_pfn);
if (start >= (u64)max_pfn << PAGE_SHIFT) {
printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n",
start_pfn, end_pfn);
return 0;
}
node_set_online(nid);
memblock_x86_register_active_regions(nid, start_pfn,
min(end_pfn, max_pfn));
if (!node_has_online_mem(nid)) {
node_start_pfn[nid] = start_pfn;
node_end_pfn[nid] = end_pfn;
} else {
node_start_pfn[nid] = min(node_start_pfn[nid], start_pfn);
node_end_pfn[nid] = max(node_end_pfn[nid], end_pfn);
}
return 0;
}
/* temporary shim, will go away soon */
void __init numa_set_distance(int from, int to, int distance)
{
/* nada */
}