1
0
Fork 0
alistair23-linux/tools/perf/builtin-top.c

1385 lines
33 KiB
C
Raw Normal View History

/*
* builtin-top.c
*
* Builtin top command: Display a continuously updated profile of
* any workload, CPU or specific PID.
*
* Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
*
* Improvements and fixes by:
*
* Arjan van de Ven <arjan@linux.intel.com>
* Yanmin Zhang <yanmin.zhang@intel.com>
* Wu Fengguang <fengguang.wu@intel.com>
* Mike Galbraith <efault@gmx.de>
* Paul Mackerras <paulus@samba.org>
*
* Released under the GPL v2. (and only v2, not any later version)
*/
#include "builtin.h"
#include "perf.h"
#include "util/color.h"
#include "util/evlist.h"
#include "util/evsel.h"
#include "util/session.h"
#include "util/symbol.h"
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
#include "util/thread.h"
#include "util/thread_map.h"
#include "util/util.h"
#include <linux/rbtree.h>
#include "util/parse-options.h"
#include "util/parse-events.h"
perf tools: Fix sparse CPU numbering related bugs At present, the perf subcommands that do system-wide monitoring (perf stat, perf record and perf top) don't work properly unless the online cpus are numbered 0, 1, ..., N-1. These tools ask for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN) and then try to create events for cpus 0, 1, ..., N-1. This creates problems for systems where the online cpus are numbered sparsely. For example, a POWER6 system in single-threaded mode (i.e. only running 1 hardware thread per core) will have only even-numbered cpus online. This fixes the problem by reading the /sys/devices/system/cpu/online file to find out which cpus are online. The code that does that is in tools/perf/util/cpumap.[ch], and consists of a read_cpu_map() function that sets up a cpumap[] array and returns the number of online cpus. If /sys/devices/system/cpu/online can't be read or can't be parsed successfully, it falls back to using sysconf to ask how many cpus are online and sets up an identity map in cpumap[]. The perf record, perf stat and perf top code then calls read_cpu_map() in the system-wide monitoring case (instead of sysconf) and uses cpumap[] to get the cpu numbers to pass to perf_event_open. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 02:36:09 -07:00
#include "util/cpumap.h"
#include "util/xyarray.h"
#include "util/debug.h"
#include <assert.h>
#include <fcntl.h>
#include <stdio.h>
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
#include <termios.h>
#include <unistd.h>
#include <inttypes.h>
#include <errno.h>
#include <time.h>
#include <sched.h>
#include <pthread.h>
#include <sys/syscall.h>
#include <sys/ioctl.h>
#include <sys/poll.h>
#include <sys/prctl.h>
#include <sys/wait.h>
#include <sys/uio.h>
#include <sys/mman.h>
#include <linux/unistd.h>
#include <linux/types.h>
#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
struct perf_evlist *evsel_list;
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 02:37:33 -06:00
static bool system_wide = false;
static int default_interval = 0;
static int count_filter = 5;
static int print_entries;
static int target_pid = -1;
static int target_tid = -1;
static struct thread_map *threads;
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 02:37:33 -06:00
static bool inherit = false;
static struct cpu_map *cpus;
static int realtime_prio = 0;
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 02:37:33 -06:00
static bool group = false;
static unsigned int page_size;
static unsigned int mmap_pages = 128;
static int freq = 1000; /* 1 KHz */
static int delay_secs = 2;
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 02:37:33 -06:00
static bool zero = false;
static bool dump_symtab = false;
static bool hide_kernel_symbols = false;
static bool hide_user_symbols = false;
static struct winsize winsize;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
/*
* Source
*/
struct source_line {
u64 eip;
unsigned long count[MAX_COUNTERS];
char *line;
struct source_line *next;
};
static const char *sym_filter = NULL;
struct sym_entry *sym_filter_entry = NULL;
struct sym_entry *sym_filter_entry_sched = NULL;
static int sym_pcnt_filter = 5;
static int sym_counter = 0;
static struct perf_evsel *sym_evsel = NULL;
static int display_weighted = -1;
static const char *cpu_list;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
/*
* Symbols
*/
struct sym_entry_source {
struct source_line *source;
struct source_line *lines;
struct source_line **lines_tail;
pthread_mutex_t lock;
};
struct sym_entry {
struct rb_node rb_node;
struct list_head node;
unsigned long snap_count;
double weight;
int skip;
u16 name_len;
u8 origin;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
struct map *map;
struct sym_entry_source *src;
unsigned long count[0];
};
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
/*
* Source functions
*/
static inline struct symbol *sym_entry__symbol(struct sym_entry *self)
{
return ((void *)self) + symbol_conf.priv_size;
}
void get_term_dimensions(struct winsize *ws)
{
char *s = getenv("LINES");
if (s != NULL) {
ws->ws_row = atoi(s);
s = getenv("COLUMNS");
if (s != NULL) {
ws->ws_col = atoi(s);
if (ws->ws_row && ws->ws_col)
return;
}
}
#ifdef TIOCGWINSZ
if (ioctl(1, TIOCGWINSZ, ws) == 0 &&
ws->ws_row && ws->ws_col)
return;
#endif
ws->ws_row = 25;
ws->ws_col = 80;
}
static void update_print_entries(struct winsize *ws)
{
print_entries = ws->ws_row;
if (print_entries > 9)
print_entries -= 9;
}
static void sig_winch_handler(int sig __used)
{
get_term_dimensions(&winsize);
update_print_entries(&winsize);
}
static int parse_source(struct sym_entry *syme)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
{
struct symbol *sym;
struct sym_entry_source *source;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
struct map *map;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
FILE *file;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 04:26:57 -06:00
char command[PATH_MAX*2];
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
const char *path;
u64 len;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
if (!syme)
return -1;
sym = sym_entry__symbol(syme);
map = syme->map;
/*
* We can't annotate with just /proc/kallsyms
*/
if (map->dso->origin == DSO__ORIG_KERNEL)
return -1;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
if (syme->src == NULL) {
syme->src = zalloc(sizeof(*source));
if (syme->src == NULL)
return -1;
pthread_mutex_init(&syme->src->lock, NULL);
}
source = syme->src;
if (source->lines) {
pthread_mutex_lock(&source->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
goto out_assign;
}
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
path = map->dso->long_name;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
len = sym->end - sym->start;
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
sprintf(command,
"objdump --start-address=%#0*" PRIx64 " --stop-address=%#0*" PRIx64 " -dS %s",
BITS_PER_LONG / 4, map__rip_2objdump(map, sym->start),
BITS_PER_LONG / 4, map__rip_2objdump(map, sym->end), path);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
file = popen(command, "r");
if (!file)
return -1;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
pthread_mutex_lock(&source->lock);
source->lines_tail = &source->lines;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
while (!feof(file)) {
struct source_line *src;
size_t dummy = 0;
perf top: Fix annotate for userspace First, for programs and prelinked libraries, annotate code was fooled by objdump output IPs (src->eip in the code) being wrongly converted to absolute IPs. In such case there were no conversion needed, but in src->eip = strtoull(src->line, NULL, 16); src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff we were reading absolute address from objdump (e.g. 8048604) and then almost doubling it, because eip & map->start are approximately close for small programs. Needless to say, that later, in record_precise_ip() there was no matching with real runtime IPs. And second, like with `perf annotate` the problem with non-prelinked *.so was that we were doing rip -> objdump address conversion wrong. Also, because unlike `perf annotate`, `perf top` code does annotation based on absolute IPs for performance reasons(*), new helper for mapping objdump addresse to IP is introduced. (*) we get samples info in absolute IPs, and since we do lots of hit-testing on absolute IPs at runtime in record_precise_ip(), it's better to convert objdump addresses to IPs once and do no conversion at runtime. I also had to fix how objdump output is parsed (with hardcoded 8/16 characters format, which was inappropriate for ET_DYN dsos with small addresses like '4ac') Also note, that not all objdump output lines has associtated IPs, e.g. look at source lines here: 000004ac <my_strlen>: extern "C" int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { int len = 0; 4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp) 4b9: eb 08 jmp 4c3 <my_strlen+0x17> while (*s) { ++len; 4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp) ++s; 4bf: 83 45 08 01 addl $0x1,0x8(%ebp) So we mark them with eip=0, and ignore such lines in annotate lookup code. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> [ Note: one hunk of this patch was applied by Mike in 57d8188 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07 06:46:15 -07:00
char *c, *sep;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
src = malloc(sizeof(struct source_line));
assert(src != NULL);
memset(src, 0, sizeof(struct source_line));
if (getline(&src->line, &dummy, file) < 0)
break;
if (!src->line)
break;
c = strchr(src->line, '\n');
if (c)
*c = 0;
src->next = NULL;
*source->lines_tail = src;
source->lines_tail = &src->next;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
perf top: Fix annotate for userspace First, for programs and prelinked libraries, annotate code was fooled by objdump output IPs (src->eip in the code) being wrongly converted to absolute IPs. In such case there were no conversion needed, but in src->eip = strtoull(src->line, NULL, 16); src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff we were reading absolute address from objdump (e.g. 8048604) and then almost doubling it, because eip & map->start are approximately close for small programs. Needless to say, that later, in record_precise_ip() there was no matching with real runtime IPs. And second, like with `perf annotate` the problem with non-prelinked *.so was that we were doing rip -> objdump address conversion wrong. Also, because unlike `perf annotate`, `perf top` code does annotation based on absolute IPs for performance reasons(*), new helper for mapping objdump addresse to IP is introduced. (*) we get samples info in absolute IPs, and since we do lots of hit-testing on absolute IPs at runtime in record_precise_ip(), it's better to convert objdump addresses to IPs once and do no conversion at runtime. I also had to fix how objdump output is parsed (with hardcoded 8/16 characters format, which was inappropriate for ET_DYN dsos with small addresses like '4ac') Also note, that not all objdump output lines has associtated IPs, e.g. look at source lines here: 000004ac <my_strlen>: extern "C" int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { int len = 0; 4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp) 4b9: eb 08 jmp 4c3 <my_strlen+0x17> while (*s) { ++len; 4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp) ++s; 4bf: 83 45 08 01 addl $0x1,0x8(%ebp) So we mark them with eip=0, and ignore such lines in annotate lookup code. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> [ Note: one hunk of this patch was applied by Mike in 57d8188 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07 06:46:15 -07:00
src->eip = strtoull(src->line, &sep, 16);
if (*sep == ':')
src->eip = map__objdump_2ip(map, src->eip);
else /* this line has no ip info (e.g. source line) */
src->eip = 0;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
pclose(file);
out_assign:
sym_filter_entry = syme;
pthread_mutex_unlock(&source->lock);
return 0;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
static void __zero_source_counters(struct sym_entry *syme)
{
int i;
struct source_line *line;
line = syme->src->lines;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
while (line) {
for (i = 0; i < evsel_list->nr_entries; i++)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
line->count[i] = 0;
line = line->next;
}
}
static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
{
struct source_line *line;
if (syme != sym_filter_entry)
return;
if (pthread_mutex_trylock(&syme->src->lock))
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
return;
if (syme->src == NULL || syme->src->source == NULL)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
goto out_unlock;
for (line = syme->src->lines; line; line = line->next) {
perf top: Fix annotate for userspace First, for programs and prelinked libraries, annotate code was fooled by objdump output IPs (src->eip in the code) being wrongly converted to absolute IPs. In such case there were no conversion needed, but in src->eip = strtoull(src->line, NULL, 16); src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff we were reading absolute address from objdump (e.g. 8048604) and then almost doubling it, because eip & map->start are approximately close for small programs. Needless to say, that later, in record_precise_ip() there was no matching with real runtime IPs. And second, like with `perf annotate` the problem with non-prelinked *.so was that we were doing rip -> objdump address conversion wrong. Also, because unlike `perf annotate`, `perf top` code does annotation based on absolute IPs for performance reasons(*), new helper for mapping objdump addresse to IP is introduced. (*) we get samples info in absolute IPs, and since we do lots of hit-testing on absolute IPs at runtime in record_precise_ip(), it's better to convert objdump addresses to IPs once and do no conversion at runtime. I also had to fix how objdump output is parsed (with hardcoded 8/16 characters format, which was inappropriate for ET_DYN dsos with small addresses like '4ac') Also note, that not all objdump output lines has associtated IPs, e.g. look at source lines here: 000004ac <my_strlen>: extern "C" int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { int len = 0; 4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp) 4b9: eb 08 jmp 4c3 <my_strlen+0x17> while (*s) { ++len; 4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp) ++s; 4bf: 83 45 08 01 addl $0x1,0x8(%ebp) So we mark them with eip=0, and ignore such lines in annotate lookup code. Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru> [ Note: one hunk of this patch was applied by Mike in 57d8188 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-07 06:46:15 -07:00
/* skip lines without IP info */
if (line->eip == 0)
continue;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
if (line->eip == ip) {
line->count[counter]++;
break;
}
if (line->eip > ip)
break;
}
out_unlock:
pthread_mutex_unlock(&syme->src->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
#define PATTERN_LEN (BITS_PER_LONG / 4 + 2)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
static void lookup_sym_source(struct sym_entry *syme)
{
struct symbol *symbol = sym_entry__symbol(syme);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
struct source_line *line;
char pattern[PATTERN_LEN + 1];
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
sprintf(pattern, "%0*" PRIx64 " <", BITS_PER_LONG / 4,
map__rip_2objdump(syme->map, symbol->start));
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
pthread_mutex_lock(&syme->src->lock);
for (line = syme->src->lines; line; line = line->next) {
if (memcmp(line->line, pattern, PATTERN_LEN) == 0) {
syme->src->source = line;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
break;
}
}
pthread_mutex_unlock(&syme->src->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
static void show_lines(struct source_line *queue, int count, int total)
{
int i;
struct source_line *line;
line = queue;
for (i = 0; i < count; i++) {
float pcnt = 100.0*(float)line->count[sym_counter]/(float)total;
printf("%8li %4.1f%%\t%s\n", line->count[sym_counter], pcnt, line->line);
line = line->next;
}
}
#define TRACE_COUNT 3
static void show_details(struct sym_entry *syme)
{
struct symbol *symbol;
struct source_line *line;
struct source_line *line_queue = NULL;
int displayed = 0;
int line_queue_count = 0, total = 0, more = 0;
if (!syme)
return;
if (!syme->src->source)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
lookup_sym_source(syme);
if (!syme->src->source)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
return;
symbol = sym_entry__symbol(syme);
printf("Showing %s for %s\n", event_name(sym_evsel), symbol->name);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
printf(" Events Pcnt (>=%d%%)\n", sym_pcnt_filter);
pthread_mutex_lock(&syme->src->lock);
line = syme->src->source;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
while (line) {
total += line->count[sym_counter];
line = line->next;
}
line = syme->src->source;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
while (line) {
float pcnt = 0.0;
if (!line_queue_count)
line_queue = line;
line_queue_count++;
if (line->count[sym_counter])
pcnt = 100.0 * line->count[sym_counter] / (float)total;
if (pcnt >= (float)sym_pcnt_filter) {
if (displayed <= print_entries)
show_lines(line_queue, line_queue_count, total);
else more++;
displayed += line_queue_count;
line_queue_count = 0;
line_queue = NULL;
} else if (line_queue_count > TRACE_COUNT) {
line_queue = line_queue->next;
line_queue_count--;
}
line->count[sym_counter] = zero ? 0 : line->count[sym_counter] * 7 / 8;
line = line->next;
}
pthread_mutex_unlock(&syme->src->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
if (more)
printf("%d lines not displayed, maybe increase display entries [e]\n", more);
}
/*
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
* Symbols will be added here in event__process_sample and will get out
* after decayed.
*/
static LIST_HEAD(active_symbols);
static pthread_mutex_t active_symbols_lock = PTHREAD_MUTEX_INITIALIZER;
/*
* Ordering weight: count-1 * count-2 * ... / count-n
*/
static double sym_weight(const struct sym_entry *sym)
{
double weight = sym->snap_count;
int counter;
perf_counter tools: Allow perf top top users to switch between weighted and individual counter display Add [w]eighted hotkey. Pressing [w] toggles between displaying weighted total of all counters, and the counter selected via [E]vent select key. ------------------------------------------------------------------------------ PerfTop: 90395 irqs/sec kernel:16.1% [cache-misses/cache-references/instructions], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 1275408.6 10881 - 5.3% - ffffffff81146f70 : copy_page_c 553683.4 43569 - 21.3% - ffffffff81146f20 : clear_page_c 74075.0 6768 - 3.3% - ffffffff81147190 : copy_user_generic_string 40602.9 7538 - 3.7% - ffffffff81284ba2 : _spin_lock 26882.1 965 - 0.5% - ffffffff8109d280 : file_ra_state_init [w] ------------------------------------------------------------------------------ PerfTop: 91221 irqs/sec kernel:14.5% [10000Hz cache-misses], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 47320.00 - 22.3% - ffffffff81146f20 : clear_page_c 14261.00 - 6.7% - ffffffff810992f5 : __rmqueue 11046.00 - 5.2% - ffffffff81146f70 : copy_page_c 7842.00 - 3.7% - ffffffff81284ba2 : _spin_lock 7234.00 - 3.4% - ffffffff810aa1d6 : unmap_vmas Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-24 02:09:50 -06:00
if (!display_weighted)
return weight;
for (counter = 1; counter < evsel_list->nr_entries - 1; counter++)
weight *= sym->count[counter];
weight /= (sym->count[counter] + 1);
return weight;
}
static long samples;
static long kernel_samples, us_samples;
static long exact_samples;
static long guest_us_samples, guest_kernel_samples;
static const char CONSOLE_CLEAR[] = "";
static void __list_insert_active_sym(struct sym_entry *syme)
{
list_add(&syme->node, &active_symbols);
}
static void list_remove_active_sym(struct sym_entry *syme)
{
pthread_mutex_lock(&active_symbols_lock);
list_del_init(&syme->node);
pthread_mutex_unlock(&active_symbols_lock);
}
static void rb_insert_active_sym(struct rb_root *tree, struct sym_entry *se)
{
struct rb_node **p = &tree->rb_node;
struct rb_node *parent = NULL;
struct sym_entry *iter;
while (*p != NULL) {
parent = *p;
iter = rb_entry(parent, struct sym_entry, rb_node);
if (se->weight > iter->weight)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&se->rb_node, parent, p);
rb_insert_color(&se->rb_node, tree);
}
static void print_sym_table(void)
{
int printed = 0, j;
struct perf_evsel *counter;
int snap = !display_weighted ? sym_counter : 0;
float samples_per_sec = samples/delay_secs;
float ksamples_per_sec = kernel_samples/delay_secs;
float us_samples_per_sec = (us_samples)/delay_secs;
float guest_kernel_samples_per_sec = (guest_kernel_samples)/delay_secs;
float guest_us_samples_per_sec = (guest_us_samples)/delay_secs;
float esamples_percent = (100.0*exact_samples)/samples;
float sum_ksamples = 0.0;
struct sym_entry *syme, *n;
struct rb_root tmp = RB_ROOT;
struct rb_node *nd;
int sym_width = 0, dso_width = 0, dso_short_width = 0;
const int win_width = winsize.ws_col - 1;
samples = us_samples = kernel_samples = exact_samples = 0;
guest_kernel_samples = guest_us_samples = 0;
/* Sort the active symbols */
pthread_mutex_lock(&active_symbols_lock);
syme = list_entry(active_symbols.next, struct sym_entry, node);
pthread_mutex_unlock(&active_symbols_lock);
list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
perf_counter tools: Allow perf top top users to switch between weighted and individual counter display Add [w]eighted hotkey. Pressing [w] toggles between displaying weighted total of all counters, and the counter selected via [E]vent select key. ------------------------------------------------------------------------------ PerfTop: 90395 irqs/sec kernel:16.1% [cache-misses/cache-references/instructions], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 1275408.6 10881 - 5.3% - ffffffff81146f70 : copy_page_c 553683.4 43569 - 21.3% - ffffffff81146f20 : clear_page_c 74075.0 6768 - 3.3% - ffffffff81147190 : copy_user_generic_string 40602.9 7538 - 3.7% - ffffffff81284ba2 : _spin_lock 26882.1 965 - 0.5% - ffffffff8109d280 : file_ra_state_init [w] ------------------------------------------------------------------------------ PerfTop: 91221 irqs/sec kernel:14.5% [10000Hz cache-misses], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 47320.00 - 22.3% - ffffffff81146f20 : clear_page_c 14261.00 - 6.7% - ffffffff810992f5 : __rmqueue 11046.00 - 5.2% - ffffffff81146f70 : copy_page_c 7842.00 - 3.7% - ffffffff81284ba2 : _spin_lock 7234.00 - 3.4% - ffffffff810aa1d6 : unmap_vmas Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-24 02:09:50 -06:00
syme->snap_count = syme->count[snap];
if (syme->snap_count != 0) {
if ((hide_user_symbols &&
syme->origin == PERF_RECORD_MISC_USER) ||
(hide_kernel_symbols &&
syme->origin == PERF_RECORD_MISC_KERNEL)) {
list_remove_active_sym(syme);
continue;
}
syme->weight = sym_weight(syme);
rb_insert_active_sym(&tmp, syme);
sum_ksamples += syme->snap_count;
perf top: Reduce display overhead Iterate over the symbol table once per display interval, and copy/sort/tally/decay only those symbols which are active. Before: top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49 Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver 28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf 28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf 28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver 28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver 28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf 28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf 28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf After: top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62 Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf 28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver 28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf 28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver 28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf 28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver 28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top 28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf 28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf [ Impact: optimization ] Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 01:57:56 -06:00
for (j = 0; j < evsel_list->nr_entries; j++)
syme->count[j] = zero ? 0 : syme->count[j] * 7 / 8;
} else
list_remove_active_sym(syme);
perf top: Reduce display overhead Iterate over the symbol table once per display interval, and copy/sort/tally/decay only those symbols which are active. Before: top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49 Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver 28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf 28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf 28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver 28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver 28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf 28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf 28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf After: top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62 Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf 28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver 28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf 28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver 28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf 28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver 28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top 28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf 28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf [ Impact: optimization ] Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 01:57:56 -06:00
}
puts(CONSOLE_CLEAR);
printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
if (!perf_guest) {
printf(" PerfTop:%8.0f irqs/sec kernel:%4.1f%%"
" exact: %4.1f%% [",
samples_per_sec,
100.0 - (100.0 * ((samples_per_sec - ksamples_per_sec) /
samples_per_sec)),
esamples_percent);
} else {
printf(" PerfTop:%8.0f irqs/sec kernel:%4.1f%% us:%4.1f%%"
" guest kernel:%4.1f%% guest us:%4.1f%%"
" exact: %4.1f%% [",
samples_per_sec,
100.0 - (100.0 * ((samples_per_sec-ksamples_per_sec) /
samples_per_sec)),
100.0 - (100.0 * ((samples_per_sec-us_samples_per_sec) /
samples_per_sec)),
100.0 - (100.0 * ((samples_per_sec -
guest_kernel_samples_per_sec) /
samples_per_sec)),
100.0 - (100.0 * ((samples_per_sec -
guest_us_samples_per_sec) /
samples_per_sec)),
esamples_percent);
}
if (evsel_list->nr_entries == 1 || !display_weighted) {
struct perf_evsel *first;
first = list_entry(evsel_list->entries.next, struct perf_evsel, node);
printf("%" PRIu64, (uint64_t)first->attr.sample_period);
if (freq)
printf("Hz ");
else
printf(" ");
}
perf_counter tools: Allow perf top top users to switch between weighted and individual counter display Add [w]eighted hotkey. Pressing [w] toggles between displaying weighted total of all counters, and the counter selected via [E]vent select key. ------------------------------------------------------------------------------ PerfTop: 90395 irqs/sec kernel:16.1% [cache-misses/cache-references/instructions], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 1275408.6 10881 - 5.3% - ffffffff81146f70 : copy_page_c 553683.4 43569 - 21.3% - ffffffff81146f20 : clear_page_c 74075.0 6768 - 3.3% - ffffffff81147190 : copy_user_generic_string 40602.9 7538 - 3.7% - ffffffff81284ba2 : _spin_lock 26882.1 965 - 0.5% - ffffffff8109d280 : file_ra_state_init [w] ------------------------------------------------------------------------------ PerfTop: 91221 irqs/sec kernel:14.5% [10000Hz cache-misses], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 47320.00 - 22.3% - ffffffff81146f20 : clear_page_c 14261.00 - 6.7% - ffffffff810992f5 : __rmqueue 11046.00 - 5.2% - ffffffff81146f70 : copy_page_c 7842.00 - 3.7% - ffffffff81284ba2 : _spin_lock 7234.00 - 3.4% - ffffffff810aa1d6 : unmap_vmas Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-24 02:09:50 -06:00
if (!display_weighted)
printf("%s", event_name(sym_evsel));
else list_for_each_entry(counter, &evsel_list->entries, node) {
if (counter->idx)
printf("/");
printf("%s", event_name(counter));
}
printf( "], ");
if (target_pid != -1)
printf(" (target_pid: %d", target_pid);
else if (target_tid != -1)
printf(" (target_tid: %d", target_tid);
else
printf(" (all");
if (cpu_list)
printf(", CPU%s: %s)\n", cpus->nr > 1 ? "s" : "", cpu_list);
else {
if (target_tid != -1)
printf(")\n");
else
printf(", %d CPU%s)\n", cpus->nr, cpus->nr > 1 ? "s" : "");
}
printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
if (sym_filter_entry) {
show_details(sym_filter_entry);
return;
}
/*
* Find the longest symbol name that will be displayed
*/
for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
syme = rb_entry(nd, struct sym_entry, rb_node);
if (++printed > print_entries ||
(int)syme->snap_count < count_filter)
continue;
if (syme->map->dso->long_name_len > dso_width)
dso_width = syme->map->dso->long_name_len;
if (syme->map->dso->short_name_len > dso_short_width)
dso_short_width = syme->map->dso->short_name_len;
if (syme->name_len > sym_width)
sym_width = syme->name_len;
}
printed = 0;
if (sym_width + dso_width > winsize.ws_col - 29) {
dso_width = dso_short_width;
if (sym_width + dso_width > winsize.ws_col - 29)
sym_width = winsize.ws_col - dso_width - 29;
}
putchar('\n');
if (evsel_list->nr_entries == 1)
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
printf(" samples pcnt");
else
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
printf(" weight samples pcnt");
if (verbose)
printf(" RIP ");
printf(" %-*.*s DSO\n", sym_width, sym_width, "function");
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
printf(" %s _______ _____",
evsel_list->nr_entries == 1 ? " " : "______");
if (verbose)
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
printf(" ________________");
printf(" %-*.*s", sym_width, sym_width, graph_line);
printf(" %-*.*s", dso_width, dso_width, graph_line);
puts("\n");
for (nd = rb_first(&tmp); nd; nd = rb_next(nd)) {
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 04:26:57 -06:00
struct symbol *sym;
double pcnt;
perf top: Reduce display overhead Iterate over the symbol table once per display interval, and copy/sort/tally/decay only those symbols which are active. Before: top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49 Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver 28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf 28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf 28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver 28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver 28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf 28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf 28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf After: top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62 Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf 28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver 28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf 28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver 28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf 28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver 28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top 28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf 28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf [ Impact: optimization ] Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 01:57:56 -06:00
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 04:26:57 -06:00
syme = rb_entry(nd, struct sym_entry, rb_node);
sym = sym_entry__symbol(syme);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
if (++printed > print_entries || (int)syme->snap_count < count_filter)
continue;
perf top: Reduce display overhead Iterate over the symbol table once per display interval, and copy/sort/tally/decay only those symbols which are active. Before: top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49 Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver 28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf 28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf 28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver 28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver 28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf 28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf 28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf After: top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62 Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf 28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver 28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf 28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver 28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf 28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver 28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top 28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf 28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf [ Impact: optimization ] Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 01:57:56 -06:00
pcnt = 100.0 - (100.0 * ((sum_ksamples - syme->snap_count) /
sum_ksamples));
perf top: Reduce display overhead Iterate over the symbol table once per display interval, and copy/sort/tally/decay only those symbols which are active. Before: top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49 Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver 28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf 28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf 28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver 28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver 28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf 28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf 28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf After: top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62 Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf 28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver 28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf 28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver 28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf 28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver 28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top 28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf 28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf [ Impact: optimization ] Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 01:57:56 -06:00
if (evsel_list->nr_entries == 1 || !display_weighted)
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
printf("%20.2f ", syme->weight);
perf top: Reduce display overhead Iterate over the symbol table once per display interval, and copy/sort/tally/decay only those symbols which are active. Before: top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49 Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver 28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf 28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf 28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver 28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver 28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf 28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf 28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf After: top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62 Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND 28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf 28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver 28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf 28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver 28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf 28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver 28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top 28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf 28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf [ Impact: optimization ] Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-25 01:57:56 -06:00
else
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
printf("%9.1f %10ld ", syme->weight, syme->snap_count);
percent_color_fprintf(stdout, "%4.1f%%", pcnt);
if (verbose)
printf(" %016" PRIx64, sym->start);
printf(" %-*.*s", sym_width, sym_width, sym->name);
printf(" %-*.*s\n", dso_width, dso_width,
dso_width >= syme->map->dso->long_name_len ?
syme->map->dso->long_name :
syme->map->dso->short_name);
}
}
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
static void prompt_integer(int *target, const char *msg)
{
char *buf = malloc(0), *p;
size_t dummy = 0;
int tmp;
fprintf(stdout, "\n%s: ", msg);
if (getline(&buf, &dummy, stdin) < 0)
return;
p = strchr(buf, '\n');
if (p)
*p = 0;
p = buf;
while(*p) {
if (!isdigit(*p))
goto out_free;
p++;
}
tmp = strtoul(buf, NULL, 10);
*target = tmp;
out_free:
free(buf);
}
static void prompt_percent(int *target, const char *msg)
{
int tmp = 0;
prompt_integer(&tmp, msg);
if (tmp >= 0 && tmp <= 100)
*target = tmp;
}
static void prompt_symbol(struct sym_entry **target, const char *msg)
{
char *buf = malloc(0), *p;
struct sym_entry *syme = *target, *n, *found = NULL;
size_t dummy = 0;
/* zero counters of active symbol */
if (syme) {
pthread_mutex_lock(&syme->src->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
__zero_source_counters(syme);
*target = NULL;
pthread_mutex_unlock(&syme->src->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
fprintf(stdout, "\n%s: ", msg);
if (getline(&buf, &dummy, stdin) < 0)
goto out_free;
p = strchr(buf, '\n');
if (p)
*p = 0;
pthread_mutex_lock(&active_symbols_lock);
syme = list_entry(active_symbols.next, struct sym_entry, node);
pthread_mutex_unlock(&active_symbols_lock);
list_for_each_entry_safe_from(syme, n, &active_symbols, node) {
struct symbol *sym = sym_entry__symbol(syme);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
if (!strcmp(buf, sym->name)) {
found = syme;
break;
}
}
if (!found) {
fprintf(stderr, "Sorry, %s is not active.\n", buf);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
sleep(1);
return;
} else
parse_source(found);
out_free:
free(buf);
}
static void print_mapped_keys(void)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
{
char *name = NULL;
if (sym_filter_entry) {
struct symbol *sym = sym_entry__symbol(sym_filter_entry);
name = sym->name;
}
fprintf(stdout, "\nMapped keys:\n");
fprintf(stdout, "\t[d] display refresh delay. \t(%d)\n", delay_secs);
fprintf(stdout, "\t[e] display entries (lines). \t(%d)\n", print_entries);
if (evsel_list->nr_entries > 1)
fprintf(stdout, "\t[E] active event counter. \t(%s)\n", event_name(sym_evsel));
fprintf(stdout, "\t[f] profile display filter (count). \t(%d)\n", count_filter);
fprintf(stdout, "\t[F] annotate display filter (percent). \t(%d%%)\n", sym_pcnt_filter);
fprintf(stdout, "\t[s] annotate symbol. \t(%s)\n", name?: "NULL");
fprintf(stdout, "\t[S] stop annotation.\n");
if (evsel_list->nr_entries > 1)
fprintf(stdout, "\t[w] toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
fprintf(stdout,
"\t[K] hide kernel_symbols symbols. \t(%s)\n",
hide_kernel_symbols ? "yes" : "no");
fprintf(stdout,
"\t[U] hide user symbols. \t(%s)\n",
hide_user_symbols ? "yes" : "no");
perf_counter tools: Allow perf top top users to switch between weighted and individual counter display Add [w]eighted hotkey. Pressing [w] toggles between displaying weighted total of all counters, and the counter selected via [E]vent select key. ------------------------------------------------------------------------------ PerfTop: 90395 irqs/sec kernel:16.1% [cache-misses/cache-references/instructions], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 1275408.6 10881 - 5.3% - ffffffff81146f70 : copy_page_c 553683.4 43569 - 21.3% - ffffffff81146f20 : clear_page_c 74075.0 6768 - 3.3% - ffffffff81147190 : copy_user_generic_string 40602.9 7538 - 3.7% - ffffffff81284ba2 : _spin_lock 26882.1 965 - 0.5% - ffffffff8109d280 : file_ra_state_init [w] ------------------------------------------------------------------------------ PerfTop: 91221 irqs/sec kernel:14.5% [10000Hz cache-misses], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 47320.00 - 22.3% - ffffffff81146f20 : clear_page_c 14261.00 - 6.7% - ffffffff810992f5 : __rmqueue 11046.00 - 5.2% - ffffffff81146f70 : copy_page_c 7842.00 - 3.7% - ffffffff81284ba2 : _spin_lock 7234.00 - 3.4% - ffffffff810aa1d6 : unmap_vmas Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-24 02:09:50 -06:00
fprintf(stdout, "\t[z] toggle sample zeroing. \t(%d)\n", zero ? 1 : 0);
fprintf(stdout, "\t[qQ] quit.\n");
}
static int key_mapped(int c)
{
switch (c) {
case 'd':
case 'e':
case 'f':
case 'z':
case 'q':
case 'Q':
case 'K':
case 'U':
case 'F':
case 's':
case 'S':
return 1;
case 'E':
case 'w':
return evsel_list->nr_entries > 1 ? 1 : 0;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 04:26:57 -06:00
default:
break;
}
return 0;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
static void handle_keypress(struct perf_session *session, int c)
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
{
if (!key_mapped(c)) {
struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
struct termios tc, save;
print_mapped_keys();
fprintf(stdout, "\nEnter selection, or unmapped key to continue: ");
fflush(stdout);
tcgetattr(0, &save);
tc = save;
tc.c_lflag &= ~(ICANON | ECHO);
tc.c_cc[VMIN] = 0;
tc.c_cc[VTIME] = 0;
tcsetattr(0, TCSANOW, &tc);
poll(&stdin_poll, 1, -1);
c = getc(stdin);
tcsetattr(0, TCSAFLUSH, &save);
if (!key_mapped(c))
return;
}
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
switch (c) {
case 'd':
prompt_integer(&delay_secs, "Enter display delay");
if (delay_secs < 1)
delay_secs = 1;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
break;
case 'e':
prompt_integer(&print_entries, "Enter display entries (lines)");
if (print_entries == 0) {
sig_winch_handler(SIGWINCH);
signal(SIGWINCH, sig_winch_handler);
} else
signal(SIGWINCH, SIG_DFL);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
break;
case 'E':
if (evsel_list->nr_entries > 1) {
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
fprintf(stderr, "\nAvailable events:");
list_for_each_entry(sym_evsel, &evsel_list->entries, node)
fprintf(stderr, "\n\t%d %s", sym_evsel->idx, event_name(sym_evsel));
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
prompt_integer(&sym_counter, "Enter details event counter");
if (sym_counter >= evsel_list->nr_entries) {
sym_evsel = list_entry(evsel_list->entries.next, struct perf_evsel, node);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
sym_counter = 0;
fprintf(stderr, "Sorry, no such event, using %s.\n", event_name(sym_evsel));
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
sleep(1);
break;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
list_for_each_entry(sym_evsel, &evsel_list->entries, node)
if (sym_evsel->idx == sym_counter)
break;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
} else sym_counter = 0;
break;
case 'f':
prompt_integer(&count_filter, "Enter display event count filter");
break;
case 'F':
prompt_percent(&sym_pcnt_filter, "Enter details display event filter (percent)");
break;
case 'K':
hide_kernel_symbols = !hide_kernel_symbols;
break;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
case 'q':
case 'Q':
printf("exiting.\n");
if (dump_symtab)
perf_session__fprintf_dsos(session, stderr);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
exit(0);
case 's':
prompt_symbol(&sym_filter_entry, "Enter details symbol");
break;
case 'S':
if (!sym_filter_entry)
break;
else {
struct sym_entry *syme = sym_filter_entry;
pthread_mutex_lock(&syme->src->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
sym_filter_entry = NULL;
__zero_source_counters(syme);
pthread_mutex_unlock(&syme->src->lock);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
break;
case 'U':
hide_user_symbols = !hide_user_symbols;
break;
perf_counter tools: Allow perf top top users to switch between weighted and individual counter display Add [w]eighted hotkey. Pressing [w] toggles between displaying weighted total of all counters, and the counter selected via [E]vent select key. ------------------------------------------------------------------------------ PerfTop: 90395 irqs/sec kernel:16.1% [cache-misses/cache-references/instructions], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 1275408.6 10881 - 5.3% - ffffffff81146f70 : copy_page_c 553683.4 43569 - 21.3% - ffffffff81146f20 : clear_page_c 74075.0 6768 - 3.3% - ffffffff81147190 : copy_user_generic_string 40602.9 7538 - 3.7% - ffffffff81284ba2 : _spin_lock 26882.1 965 - 0.5% - ffffffff8109d280 : file_ra_state_init [w] ------------------------------------------------------------------------------ PerfTop: 91221 irqs/sec kernel:14.5% [10000Hz cache-misses], (all, 4 CPUs) ------------------------------------------------------------------------------ weight samples pcnt RIP kernel function ______ _______ _____ ________________ _______________ 47320.00 - 22.3% - ffffffff81146f20 : clear_page_c 14261.00 - 6.7% - ffffffff810992f5 : __rmqueue 11046.00 - 5.2% - ffffffff81146f70 : copy_page_c 7842.00 - 3.7% - ffffffff81284ba2 : _spin_lock 7234.00 - 3.4% - ffffffff810aa1d6 : unmap_vmas Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-24 02:09:50 -06:00
case 'w':
display_weighted = ~display_weighted;
break;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
case 'z':
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 02:37:33 -06:00
zero = !zero;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
break;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 04:26:57 -06:00
default:
break;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
}
}
static void *display_thread(void *arg __used)
{
struct pollfd stdin_poll = { .fd = 0, .events = POLLIN };
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
struct termios tc, save;
int delay_msecs, c;
struct perf_session *session = (struct perf_session *) arg;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
tcgetattr(0, &save);
tc = save;
tc.c_lflag &= ~(ICANON | ECHO);
tc.c_cc[VMIN] = 0;
tc.c_cc[VTIME] = 0;
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
repeat:
delay_msecs = delay_secs * 1000;
tcsetattr(0, TCSANOW, &tc);
/* trash return*/
getc(stdin);
do {
print_sym_table();
} while (!poll(&stdin_poll, 1, delay_msecs) == 1);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
c = getc(stdin);
tcsetattr(0, TCSAFLUSH, &save);
handle_keypress(session, c);
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
goto repeat;
return NULL;
}
/* Tag samples to be skipped. */
static const char *skip_symbols[] = {
"default_idle",
"native_safe_halt",
"cpu_idle",
"enter_idle",
"exit_idle",
"mwait_idle",
"mwait_idle_with_hints",
"poll_idle",
"ppc64_runlatch_off",
"pseries_dedicated_idle_sleep",
NULL
};
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
static int symbol_filter(struct map *map, struct symbol *sym)
{
struct sym_entry *syme;
const char *name = sym->name;
int i;
/*
* ppc64 uses function descriptors and appends a '.' to the
* start of every instruction address. Remove it.
*/
if (name[0] == '.')
name++;
if (!strcmp(name, "_text") ||
!strcmp(name, "_etext") ||
!strcmp(name, "_sinittext") ||
!strncmp("init_module", name, 11) ||
!strncmp("cleanup_module", name, 14) ||
strstr(name, "_text_start") ||
strstr(name, "_text_end"))
return 1;
syme = symbol__priv(sym);
perf tools: Rewrite and improve support for kernel modules Representing modules as struct map entries, backed by a DSO, etc, using /proc/modules to find where the module is loaded. DSOs now can have a short and long name, so that in verbose mode we can show exactly which .ko or vmlinux image was used. As kernel modules now are a DSO separate from the kernel, we can ask for just the hits for a particular set of kernel modules, just like we can do with shared libraries: [root@doppio linux-2.6-tip]# perf report -n --vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15 84.58% 13266 Xorg [k] drm_clflush_pages 4.02% 630 Xorg [k] trace_kmalloc.clone.0 3.95% 619 Xorg [k] drm_ioctl 2.07% 324 Xorg [k] drm_addbufs 1.68% 263 Xorg [k] drm_gem_close_ioctl 0.77% 120 Xorg [k] drm_setmaster_ioctl 0.70% 110 Xorg [k] drm_lastclose 0.68% 106 Xorg [k] drm_open 0.54% 85 Xorg [k] drm_mm_search_free [root@doppio linux-2.6-tip]# Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko would have the same effect. Allowing specifying just 'drm.ko' is left for another patch. Processing kallsyms so that per kernel module struct map are instantiated was also left for another patch. That will allow removing the module name from each of its symbols. struct symbol was reduced by removing the ->module backpointer and moving it (well now the map) to struct symbol_entry in perf top, that is its only user right now. The total linecount went down by ~500 lines. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-02 00:29:58 -06:00
syme->map = map;
syme->src = NULL;
if (!sym_filter_entry && sym_filter && !strcmp(name, sym_filter)) {
/* schedule initial sym_filter_entry setup */
sym_filter_entry_sched = syme;
sym_filter = NULL;
}
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
for (i = 0; skip_symbols[i]; i++) {
if (!strcmp(skip_symbols[i], name)) {
syme->skip = 1;
break;
}
}
if (!syme->skip)
syme->name_len = strlen(sym->name);
return 0;
}
static void event__process_sample(const event_t *self,
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 05:25:28 -07:00
struct sample_data *sample,
struct perf_session *session)
{
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
u64 ip = self->ip.ip;
struct sym_entry *syme;
perf tools: Consolidate symbol resolving across all tools Now we have a very high level routine for simple tools to process IP sample events: int event__preprocess_sample(const event_t *self, struct addr_location *al, symbol_filter_t filter) It receives the event itself and will insert new threads in the global threads list and resolve the map and symbol, filling all this info into the new addr_location struct, so that tools like annotate and report can further process the event by creating hist_entries in their specific way (with or without callgraphs, etc). It in turn uses the new next layer function: void thread__find_addr_location(struct thread *self, u8 cpumode, enum map_type type, u64 addr, struct addr_location *al, symbol_filter_t filter) This one will, given a thread (userspace or the kernel kthread one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE too in the near future) at the given cpumode, taking vdsos into account (userspace hit, but kernel symbol) and will fill all these details in the addr_location given. Tools that need a more compact API for plain function resolution, like 'kmem', can use this other one: struct symbol *thread__find_function(struct thread *self, u64 addr, symbol_filter_t filter) So, to resolve a kernel symbol, that is all the 'kmem' tool needs, its just a matter of calling: sym = thread__find_function(kthread, addr, NULL); The 'filter' parameter is needed because we do lazy parsing/loading of ELF symtabs or /proc/kallsyms. With this we remove more code duplication all around, which is always good, huh? :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: John Kacur <jkacur@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 11:29:23 -07:00
struct addr_location al;
struct machine *machine;
u8 origin = self->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
++samples;
switch (origin) {
perf tools: Consolidate symbol resolving across all tools Now we have a very high level routine for simple tools to process IP sample events: int event__preprocess_sample(const event_t *self, struct addr_location *al, symbol_filter_t filter) It receives the event itself and will insert new threads in the global threads list and resolve the map and symbol, filling all this info into the new addr_location struct, so that tools like annotate and report can further process the event by creating hist_entries in their specific way (with or without callgraphs, etc). It in turn uses the new next layer function: void thread__find_addr_location(struct thread *self, u8 cpumode, enum map_type type, u64 addr, struct addr_location *al, symbol_filter_t filter) This one will, given a thread (userspace or the kernel kthread one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE too in the near future) at the given cpumode, taking vdsos into account (userspace hit, but kernel symbol) and will fill all these details in the addr_location given. Tools that need a more compact API for plain function resolution, like 'kmem', can use this other one: struct symbol *thread__find_function(struct thread *self, u64 addr, symbol_filter_t filter) So, to resolve a kernel symbol, that is all the 'kmem' tool needs, its just a matter of calling: sym = thread__find_function(kthread, addr, NULL); The 'filter' parameter is needed because we do lazy parsing/loading of ELF symtabs or /proc/kallsyms. With this we remove more code duplication all around, which is always good, huh? :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: John Kacur <jkacur@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 11:29:23 -07:00
case PERF_RECORD_MISC_USER:
++us_samples;
if (hide_user_symbols)
return;
machine = perf_session__find_host_machine(session);
perf tools: Consolidate symbol resolving across all tools Now we have a very high level routine for simple tools to process IP sample events: int event__preprocess_sample(const event_t *self, struct addr_location *al, symbol_filter_t filter) It receives the event itself and will insert new threads in the global threads list and resolve the map and symbol, filling all this info into the new addr_location struct, so that tools like annotate and report can further process the event by creating hist_entries in their specific way (with or without callgraphs, etc). It in turn uses the new next layer function: void thread__find_addr_location(struct thread *self, u8 cpumode, enum map_type type, u64 addr, struct addr_location *al, symbol_filter_t filter) This one will, given a thread (userspace or the kernel kthread one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE too in the near future) at the given cpumode, taking vdsos into account (userspace hit, but kernel symbol) and will fill all these details in the addr_location given. Tools that need a more compact API for plain function resolution, like 'kmem', can use this other one: struct symbol *thread__find_function(struct thread *self, u64 addr, symbol_filter_t filter) So, to resolve a kernel symbol, that is all the 'kmem' tool needs, its just a matter of calling: sym = thread__find_function(kthread, addr, NULL); The 'filter' parameter is needed because we do lazy parsing/loading of ELF symtabs or /proc/kallsyms. With this we remove more code duplication all around, which is always good, huh? :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: John Kacur <jkacur@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 11:29:23 -07:00
break;
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
case PERF_RECORD_MISC_KERNEL:
++kernel_samples;
if (hide_kernel_symbols)
return;
machine = perf_session__find_host_machine(session);
break;
case PERF_RECORD_MISC_GUEST_KERNEL:
++guest_kernel_samples;
machine = perf_session__find_machine(session, self->ip.pid);
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
break;
case PERF_RECORD_MISC_GUEST_USER:
++guest_us_samples;
/*
* TODO: we don't process guest user from host side
* except simple counting.
*/
return;
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
default:
return;
}
if (!machine && perf_guest) {
pr_err("Can't find guest [%d]'s kernel information\n",
self->ip.pid);
return;
}
if (self->header.misc & PERF_RECORD_MISC_EXACT_IP)
exact_samples++;
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 05:25:28 -07:00
if (event__preprocess_sample(self, session, &al, sample,
symbol_filter) < 0 ||
al.filtered)
perf tools: Consolidate symbol resolving across all tools Now we have a very high level routine for simple tools to process IP sample events: int event__preprocess_sample(const event_t *self, struct addr_location *al, symbol_filter_t filter) It receives the event itself and will insert new threads in the global threads list and resolve the map and symbol, filling all this info into the new addr_location struct, so that tools like annotate and report can further process the event by creating hist_entries in their specific way (with or without callgraphs, etc). It in turn uses the new next layer function: void thread__find_addr_location(struct thread *self, u8 cpumode, enum map_type type, u64 addr, struct addr_location *al, symbol_filter_t filter) This one will, given a thread (userspace or the kernel kthread one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE too in the near future) at the given cpumode, taking vdsos into account (userspace hit, but kernel symbol) and will fill all these details in the addr_location given. Tools that need a more compact API for plain function resolution, like 'kmem', can use this other one: struct symbol *thread__find_function(struct thread *self, u64 addr, symbol_filter_t filter) So, to resolve a kernel symbol, that is all the 'kmem' tool needs, its just a matter of calling: sym = thread__find_function(kthread, addr, NULL); The 'filter' parameter is needed because we do lazy parsing/loading of ELF symtabs or /proc/kallsyms. With this we remove more code duplication all around, which is always good, huh? :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: John Kacur <jkacur@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 11:29:23 -07:00
return;
if (al.sym == NULL) {
/*
* As we do lazy loading of symtabs we only will know if the
* specified vmlinux file is invalid when we actually have a
* hit in kernel space and then try to load it. So if we get
* here and there are _no_ symbols in the DSO backing the
* kernel map, bail out.
*
* We may never get here, for instance, if we use -K/
* --hide-kernel-symbols, even if the user specifies an
* invalid --vmlinux ;-)
*/
if (al.map == machine->vmlinux_maps[MAP__FUNCTION] &&
RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION])) {
pr_err("The %s file can't be used\n",
symbol_conf.vmlinux_name);
exit(1);
}
return;
}
/* let's see, whether we need to install initial sym_filter_entry */
if (sym_filter_entry_sched) {
sym_filter_entry = sym_filter_entry_sched;
sym_filter_entry_sched = NULL;
if (parse_source(sym_filter_entry) < 0) {
struct symbol *sym = sym_entry__symbol(sym_filter_entry);
pr_err("Can't annotate %s", sym->name);
if (sym_filter_entry->map->dso->origin == DSO__ORIG_KERNEL) {
pr_err(": No vmlinux file was found in the path:\n");
machine__fprintf_vmlinux_path(machine, stderr);
} else
pr_err(".\n");
exit(1);
}
}
perf tools: Consolidate symbol resolving across all tools Now we have a very high level routine for simple tools to process IP sample events: int event__preprocess_sample(const event_t *self, struct addr_location *al, symbol_filter_t filter) It receives the event itself and will insert new threads in the global threads list and resolve the map and symbol, filling all this info into the new addr_location struct, so that tools like annotate and report can further process the event by creating hist_entries in their specific way (with or without callgraphs, etc). It in turn uses the new next layer function: void thread__find_addr_location(struct thread *self, u8 cpumode, enum map_type type, u64 addr, struct addr_location *al, symbol_filter_t filter) This one will, given a thread (userspace or the kernel kthread one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE too in the near future) at the given cpumode, taking vdsos into account (userspace hit, but kernel symbol) and will fill all these details in the addr_location given. Tools that need a more compact API for plain function resolution, like 'kmem', can use this other one: struct symbol *thread__find_function(struct thread *self, u64 addr, symbol_filter_t filter) So, to resolve a kernel symbol, that is all the 'kmem' tool needs, its just a matter of calling: sym = thread__find_function(kthread, addr, NULL); The 'filter' parameter is needed because we do lazy parsing/loading of ELF symtabs or /proc/kallsyms. With this we remove more code duplication all around, which is always good, huh? :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: John Kacur <jkacur@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-27 11:29:23 -07:00
syme = symbol__priv(al.sym);
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
if (!syme->skip) {
struct perf_evsel *evsel;
syme->origin = origin;
evsel = perf_evlist__id2evsel(evsel_list, sample->id);
assert(evsel != NULL);
syme->count[evsel->idx]++;
record_precise_ip(syme, evsel->idx, ip);
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
pthread_mutex_lock(&active_symbols_lock);
if (list_empty(&syme->node) || !syme->node.next)
__list_insert_active_sym(syme);
pthread_mutex_unlock(&active_symbols_lock);
}
}
static void perf_session__mmap_read_cpu(struct perf_session *self, int cpu)
{
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 05:25:28 -07:00
struct sample_data sample;
event_t *event;
while ((event = perf_evlist__read_on_cpu(evsel_list, cpu)) != NULL) {
perf_session__parse_sample(self, event, &sample);
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
if (event->header.type == PERF_RECORD_SAMPLE)
event__process_sample(event, &sample, self);
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
else
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 05:25:28 -07:00
event__process(event, &sample, self);
}
}
static void perf_session__mmap_read(struct perf_session *self)
{
int i;
for (i = 0; i < cpus->nr; i++)
perf_session__mmap_read_cpu(self, i);
}
static void start_counters(struct perf_evlist *evlist)
{
struct perf_evsel *counter;
list_for_each_entry(counter, &evlist->entries, node) {
struct perf_event_attr *attr = &counter->attr;
attr->sample_type = PERF_SAMPLE_IP | PERF_SAMPLE_TID;
if (freq) {
attr->sample_type |= PERF_SAMPLE_PERIOD;
attr->freq = 1;
attr->sample_freq = freq;
}
if (evlist->nr_entries > 1) {
attr->sample_type |= PERF_SAMPLE_ID;
attr->read_format |= PERF_FORMAT_ID;
}
attr->mmap = 1;
try_again:
if (perf_evsel__open(counter, cpus, threads, group, inherit) < 0) {
int err = errno;
if (err == EPERM || err == EACCES)
die("Permission error - are you root?\n"
"\t Consider tweaking"
" /proc/sys/kernel/perf_event_paranoid.\n");
/*
* If it's cycles then fall back to hrtimer
* based cpu-clock-tick sw counter, which
* is always available even if no PMU support:
*/
if (attr->type == PERF_TYPE_HARDWARE &&
attr->config == PERF_COUNT_HW_CPU_CYCLES) {
if (verbose)
warning(" ... trying to fall back to cpu-clock-ticks\n");
attr->type = PERF_TYPE_SOFTWARE;
attr->config = PERF_COUNT_SW_CPU_CLOCK;
goto try_again;
}
printf("\n");
error("sys_perf_event_open() syscall returned with %d "
"(%s). /bin/dmesg may provide additional information.\n",
err, strerror(err));
die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
exit(-1);
}
}
if (perf_evlist__mmap(evlist, cpus, threads, mmap_pages, true) < 0)
die("failed to mmap with %d (%s)\n", errno, strerror(errno));
}
static int __cmd_top(void)
{
pthread_t thread;
struct perf_evsel *first;
int ret;
/*
* FIXME: perf_session__new should allow passing a O_MMAP, so that all this
* mmap reading, etc is encapsulated in it. Use O_WRONLY for now.
*/
perf session: Fallback to unordered processing if no sample_id_all If we are running the new perf on an old kernel without support for sample_id_all, we should fall back to the old unordered processing of events. If we didn't than we would *always* process events without timestamps out of order, whether or not we hit a reordering race. In other words, instead of there being a chance of not attributing samples correctly, we would guarantee that samples would not be attributed. While processing all events without timestamps before events with timestamps may seem like an intuitive solution, it falls down as PERF_RECORD_EXIT events would also be processed before any samples. Even with a workaround for that case, samples before/after an exec would not be attributed correctly. This patch allows commands to indicate whether they need to fall back to unordered processing, so that commands that do not care about timestamps on every event will not be affected. If we do fallback, this will print out a warning if report -D was invoked. This patch adds the test in perf_session__new so that we only need to test once per session. Commands that do not use an event_ops (such as record and top) can simply pass NULL in it's place. Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1291951882-sup-6069@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-09 20:09:16 -07:00
struct perf_session *session = perf_session__new(NULL, O_WRONLY, false, false, NULL);
if (session == NULL)
return -ENOMEM;
if (target_tid != -1)
event__synthesize_thread(target_tid, event__process, session);
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
else
event__synthesize_threads(event__process, session);
perf top: Support userspace symbols too Example: Compiling the kernel with 'make -k 22 allyesconfig' [root@emilia linux-2.6-tip]# perf top -r 90 ------------------------------------------------------------------------------ PerfTop: 3669 irqs/sec kernel:59.9% [1000Hz cycles], (all, 8 CPUs) ------------------------------------------------------------------------------ samples pcnt function DSO _______ _____ ________________________________ ________________ 3062.00 6.5% clear_page_c [kernel] 2233.00 4.8% _int_malloc /lib64/libc-2.5.so 2100.00 4.5% yylex /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 2029.00 4.3% memset /lib64/libc-2.5.so 1224.00 2.6% page_fault [kernel] 1075.00 2.3% __GI_strlen /lib64/libc-2.5.so 863.00 1.8% sub_preempt_count [kernel] 822.00 1.8% __GI_memcpy /lib64/libc-2.5.so 810.00 1.7% __GI_vfprintf /lib64/libc-2.5.so 786.00 1.7% _int_free /lib64/libc-2.5.so 775.00 1.7% __GI_strcmp /lib64/libc-2.5.so 748.00 1.6% _spin_lock [kernel] 699.00 1.5% main /home/acme/git/build/allyesconfig/scripts/basic/fixdep 659.00 1.4% add_preempt_count [kernel] 649.00 1.4% yyparse /home/acme/git/build/allyesconfig/scripts/genksyms/genksyms 645.00 1.4% preempt_trace [kernel] 635.00 1.4% __GI___libc_free /lib64/libc-2.5.so 597.00 1.3% trace_preempt_on [kernel] 551.00 1.2% __GI___libc_malloc /lib64/libc-2.5.so 516.00 1.1% _spin_lock_irqsave [kernel] 481.00 1.0% copy_user_generic_string [kernel] 479.00 1.0% unmap_vmas [kernel] 429.00 0.9% _IO_file_xsputn_internal /lib64/libc-2.5.so 425.00 0.9% __GI_strncpy /lib64/libc-2.5.so 416.00 0.9% get_page_from_freelist [kernel] 414.00 0.9% malloc_consolidate /lib64/libc-2.5.so 406.00 0.9% get_parent_ip [kernel] 362.00 0.8% __rmqueue [kernel] 347.00 0.7% in_lock_functions [kernel] 316.00 0.7% __d_lookup [kernel] [root@emilia linux-2.6-tip]# More polishing is needed to print just DSO basename when not --verbose, etc. Supporting a 'comm' column requires some more reworking of 'perf top' internals as we will need to use something like the hist entries 'perf report' uses and will be done in another patch. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1256592199-9608-3-git-send-email-acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 15:23:19 -06:00
start_counters(evsel_list);
first = list_entry(evsel_list->entries.next, struct perf_evsel, node);
perf_session__set_sample_type(session, first->attr.sample_type);
/* Wait for a minimal set of events before starting the snapshot */
poll(evsel_list->pollfd, evsel_list->nr_fds, 100);
perf_session__mmap_read(session);
if (pthread_create(&thread, NULL, display_thread, session)) {
printf("Could not create display thread.\n");
exit(-1);
}
if (realtime_prio) {
struct sched_param param;
param.sched_priority = realtime_prio;
if (sched_setscheduler(0, SCHED_FIFO, &param)) {
printf("Could not set realtime priority.\n");
exit(-1);
}
}
while (1) {
int hits = samples;
perf_session__mmap_read(session);
if (hits == samples)
ret = poll(evsel_list->pollfd, evsel_list->nr_fds, 100);
}
return 0;
}
static const char * const top_usage[] = {
"perf top [<options>]",
NULL
};
static const struct option options[] = {
OPT_CALLBACK('e', "event", &evsel_list, "event",
"event selector. use 'perf list' to list available events",
parse_events),
OPT_INTEGER('c', "count", &default_interval,
"event period to sample"),
OPT_INTEGER('p', "pid", &target_pid,
"profile events on existing process id"),
OPT_INTEGER('t', "tid", &target_tid,
"profile events on existing thread id"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
"system-wide collection from all CPUs"),
OPT_STRING('C', "cpu", &cpu_list, "cpu",
"list of cpus to monitor"),
OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
"file", "vmlinux pathname"),
OPT_BOOLEAN('K', "hide_kernel_symbols", &hide_kernel_symbols,
"hide kernel symbols"),
OPT_UINTEGER('m', "mmap-pages", &mmap_pages, "number of mmap data pages"),
OPT_INTEGER('r', "realtime", &realtime_prio,
"collect data with this RT SCHED_FIFO priority"),
OPT_INTEGER('d', "delay", &delay_secs,
"number of seconds to delay between refreshes"),
OPT_BOOLEAN('D', "dump-symtab", &dump_symtab,
"dump the symbol table used for profiling"),
OPT_INTEGER('f', "count-filter", &count_filter,
"only display functions with more events than this"),
OPT_BOOLEAN('g', "group", &group,
"put the counters into a counter group"),
OPT_BOOLEAN('i', "inherit", &inherit,
"child tasks inherit counters"),
perf_counter tools: Fix/resurrect perf top annotation in a simple interactive form perf top used to have annotation support, but it has bitrotted and removed. This patch restores that: it allows the user to select any symbol in kernel space for source level annotation on the fly, switch between event counters and alter display variables. When symbol details are being displayed, stopping annotation reverts to normal. known keys: [d] select display delay. [e] select display entries (lines). [E] select annotation event counter. [f] select normal display count filter. [F] select annotation display count filter (percentage). [qQ] quit. [s] select annotation symbol and start annotation. [S] stop annotation, revert to normal display. [z] toggle event count zeroing. Sample: ------------------------------------------------------------------------------ PerfTop: 16719 irqs/sec kernel:78.7% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing cache-misses for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% /* adjust length to remove Ethernet CRC */ 0 0.0% if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) 0 0.0% length -= 4; 436 5.0% f039: 41 f6 84 24 5c 29 00 testb $0x1,0x295c(%r12) 0 0.0% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 0 0.0% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 811 9.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 0 0.0% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 7226 82.6% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Available events: 0 cache-misses 1 cache-references 2 instructions 3 cycles Enter details event counter: 2 ------------------------------------------------------------------------------ PerfTop: 15035 irqs/sec kernel:79.0% [cache-misses/cache-references/instructions/cycles], (all, 4 CPUs) ------------------------------------------------------------------------------ Showing instructions for e1000_clean_rx_irq Events Pcnt (>=3%) 0 0.0% int *work_done, int work_to_do) 0 0.0% { 175 0.9% eebf: 55 push %rbp 1898 9.8% eec0: 48 89 e5 mov %rsp,%rbp 0 0.0% 0 0.0% i = rx_ring->next_to_clean; 140 0.7% ef0a: 0f b7 41 1a movzwl 0x1a(%rcx),%eax 670 3.4% ef0e: 89 45 ac mov %eax,-0x54(%rbp) 0 0.0% { 0 0.0% memcpy(skb->data + offset, from, len); 91 0.5% f07b: 49 8b b6 e8 00 00 00 mov 0xe8(%r14),%rsi 1153 5.9% f082: 48 8b b8 e8 00 00 00 mov 0xe8(%rax),%rdi 42 0.2% f089: 8b 4d 84 mov -0x7c(%rbp),%ecx 14 0.1% f08c: 48 83 ef 02 sub $0x2,%rdi 0 0.0% f090: 48 83 ee 02 sub $0x2,%rsi 1618 8.3% f094: f3 a4 rep movsb %ds:(%rsi),%es:(%rdi) 0 0.0% 0 0.0% /* return some buffers to hardware, one at a time is too slow */ 0 0.0% if (cleaned_count >= E1000_RX_BUFFER_WRITE) { 867 4.5% f0e7: 83 7d b0 0f cmpl $0xf,-0x50(%rbp) 0 0.0% 0 0.0% while (rx_desc->status & E1000_RXD_STAT_DD) { 37 0.2% f114: 41 f6 47 0c 01 testb $0x1,0xc(%r15) 4047 20.8% f119: 0f 85 24 fe ff ff jne ef43 <e1000_clean_rx_irq+0x84> Signed-off-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-22 12:36:03 -06:00
OPT_STRING('s', "sym-annotate", &sym_filter, "symbol name",
"symbol to annotate"),
OPT_BOOLEAN('z', "zero", &zero,
"zero history across updates"),
OPT_INTEGER('F', "freq", &freq,
"profile at this frequency"),
OPT_INTEGER('E', "entries", &print_entries,
"display this many functions"),
OPT_BOOLEAN('U', "hide_user_symbols", &hide_user_symbols,
"hide user symbols"),
perf: Fix endianness argument compatibility with OPT_BOOLEAN() and introduce OPT_INCR() Parsing an option from the command line with OPT_BOOLEAN on a bool data type would not work on a big-endian machine due to the manner in which the boolean was being cast into an int and incremented. For example, running 'perf probe --list' on a PowerPC machine would fail to properly set the list_events bool and would therefore print out the usage information and terminate. This patch makes OPT_BOOLEAN work as expected with a bool datatype. For cases where the original OPT_BOOLEAN was intentionally being used to increment an int each time it was passed in on the command line, this patch introduces OPT_INCR with the old behaviour of OPT_BOOLEAN (the verbose variable is currently the only such example of this). I have reviewed every use of OPT_BOOLEAN to verify that a true C99 bool was passed. Where integers were used, I verified that they were only being used for boolean logic and changed them to bools to ensure that they would not be mistakenly used as ints. The major exception was the verbose variable which now uses OPT_INCR instead of OPT_BOOLEAN. Signed-off-by: Ian Munsie <imunsie@au.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: <stable@kernel.org> # NOTE: wont apply to .3[34].x cleanly, please backport Cc: Git development list <git@vger.kernel.org> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Eric B Munson <ebmunson@us.ibm.com> Cc: Valdis.Kletnieks@vt.edu Cc: WANG Cong <amwang@redhat.com> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Mike Galbraith <efault@gmx.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Anton Blanchard <anton@samba.org> Cc: John Kacur <jkacur@redhat.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1271147857-11604-1-git-send-email-imunsie@au.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-13 02:37:33 -06:00
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
OPT_END()
};
int cmd_top(int argc, const char **argv, const char *prefix __used)
{
struct perf_evsel *pos;
int status = -ENOMEM;
evsel_list = perf_evlist__new();
if (evsel_list == NULL)
return -ENOMEM;
page_size = sysconf(_SC_PAGE_SIZE);
argc = parse_options(argc, argv, options, top_usage, 0);
if (argc)
usage_with_options(top_usage, options);
if (target_pid != -1)
target_tid = target_pid;
threads = thread_map__new(target_pid, target_tid);
if (threads == NULL) {
pr_err("Problems finding threads of monitor\n");
usage_with_options(top_usage, options);
}
/* CPU and PID are mutually exclusive */
if (target_tid > 0 && cpu_list) {
printf("WARNING: PID switch overriding CPU\n");
sleep(1);
cpu_list = NULL;
}
if (!evsel_list->nr_entries &&
perf_evlist__add_default(evsel_list) < 0) {
pr_err("Not enough memory for event selector list\n");
return -ENOMEM;
}
if (delay_secs < 1)
delay_secs = 1;
/*
* User specified count overrides default frequency.
*/
if (default_interval)
freq = 0;
else if (freq) {
default_interval = freq;
} else {
fprintf(stderr, "frequency and count are zero, aborting\n");
exit(EXIT_FAILURE);
}
if (target_tid != -1)
cpus = cpu_map__dummy_new();
perf tools: Fix sparse CPU numbering related bugs At present, the perf subcommands that do system-wide monitoring (perf stat, perf record and perf top) don't work properly unless the online cpus are numbered 0, 1, ..., N-1. These tools ask for the number of online cpus with sysconf(_SC_NPROCESSORS_ONLN) and then try to create events for cpus 0, 1, ..., N-1. This creates problems for systems where the online cpus are numbered sparsely. For example, a POWER6 system in single-threaded mode (i.e. only running 1 hardware thread per core) will have only even-numbered cpus online. This fixes the problem by reading the /sys/devices/system/cpu/online file to find out which cpus are online. The code that does that is in tools/perf/util/cpumap.[ch], and consists of a read_cpu_map() function that sets up a cpumap[] array and returns the number of online cpus. If /sys/devices/system/cpu/online can't be read or can't be parsed successfully, it falls back to using sysconf to ask how many cpus are online and sets up an identity map in cpumap[]. The perf record, perf stat and perf top code then calls read_cpu_map() in the system-wide monitoring case (instead of sysconf) and uses cpumap[] to get the cpu numbers to pass to perf_event_open. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Anton Blanchard <anton@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100310093609.GA3959@brick.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-10 02:36:09 -07:00
else
cpus = cpu_map__new(cpu_list);
if (cpus == NULL)
usage_with_options(top_usage, options);
list_for_each_entry(pos, &evsel_list->entries, node) {
if (perf_evsel__alloc_fd(pos, cpus->nr, threads->nr) < 0)
goto out_free_fd;
/*
* Fill in the ones not specifically initialized via -c:
*/
if (pos->attr.sample_period)
continue;
pos->attr.sample_period = default_interval;
}
if (perf_evlist__alloc_pollfd(evsel_list, cpus->nr, threads->nr) < 0 ||
perf_evlist__alloc_mmap(evsel_list, cpus->nr) < 0)
goto out_free_fd;
sym_evsel = list_entry(evsel_list->entries.next, struct perf_evsel, node);
symbol_conf.priv_size = (sizeof(struct sym_entry) +
(evsel_list->nr_entries + 1) * sizeof(unsigned long));
symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL);
if (symbol__init() < 0)
return -1;
get_term_dimensions(&winsize);
if (print_entries == 0) {
update_print_entries(&winsize);
signal(SIGWINCH, sig_winch_handler);
}
status = __cmd_top();
out_free_fd:
perf_evlist__delete(evsel_list);
return status;
}