1
0
Fork 0
alistair23-linux/arch/powerpc/platforms/ps3/interrupt.c

783 lines
19 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* PS3 interrupt routines.
*
* Copyright (C) 2006 Sony Computer Entertainment Inc.
* Copyright 2006 Sony Corp.
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/irq.h>
#include <asm/machdep.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <asm/smp.h>
#include "platform.h"
#if defined(DEBUG)
#define DBG udbg_printf
#define FAIL udbg_printf
#else
#define DBG pr_devel
#define FAIL pr_debug
#endif
/**
* struct ps3_bmp - a per cpu irq status and mask bitmap structure
* @status: 256 bit status bitmap indexed by plug
* @unused_1: Alignment
* @mask: 256 bit mask bitmap indexed by plug
* @unused_2: Alignment
*
* The HV maintains per SMT thread mappings of HV outlet to HV plug on
* behalf of the guest. These mappings are implemented as 256 bit guest
* supplied bitmaps indexed by plug number. The addresses of the bitmaps
* are registered with the HV through lv1_configure_irq_state_bitmap().
* The HV requires that the 512 bits of status + mask not cross a page
* boundary. PS3_BMP_MINALIGN is used to define this minimal 64 byte
* alignment.
*
* The HV supports 256 plugs per thread, assigned as {0..255}, for a total
* of 512 plugs supported on a processor. To simplify the logic this
* implementation equates HV plug value to Linux virq value, constrains each
* interrupt to have a system wide unique plug number, and limits the range
* of the plug values to map into the first dword of the bitmaps. This
* gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note
* that there is no constraint on how many in this set an individual thread
* can acquire.
*
* The mask is declared as unsigned long so we can use set/clear_bit on it.
*/
#define PS3_BMP_MINALIGN 64
struct ps3_bmp {
struct {
u64 status;
u64 unused_1[3];
unsigned long mask;
u64 unused_2[3];
};
};
/**
* struct ps3_private - a per cpu data structure
* @bmp: ps3_bmp structure
* @bmp_lock: Synchronize access to bmp.
* @ipi_debug_brk_mask: Mask for debug break IPIs
* @ppe_id: HV logical_ppe_id
* @thread_id: HV thread_id
* @ipi_mask: Mask of IPI virqs
*/
struct ps3_private {
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
spinlock_t bmp_lock;
u64 ppe_id;
u64 thread_id;
unsigned long ipi_debug_brk_mask;
unsigned long ipi_mask;
};
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
/**
* ps3_chip_mask - Set an interrupt mask bit in ps3_bmp.
* @virq: The assigned Linux virq.
*
* Sets ps3_bmp.mask and calls lv1_did_update_interrupt_mask().
*/
static void ps3_chip_mask(struct irq_data *d)
{
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
clear_bit(63 - d->irq, &pd->bmp.mask);
lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id);
local_irq_restore(flags);
}
/**
* ps3_chip_unmask - Clear an interrupt mask bit in ps3_bmp.
* @virq: The assigned Linux virq.
*
* Clears ps3_bmp.mask and calls lv1_did_update_interrupt_mask().
*/
static void ps3_chip_unmask(struct irq_data *d)
{
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
set_bit(63 - d->irq, &pd->bmp.mask);
lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id);
local_irq_restore(flags);
}
/**
* ps3_chip_eoi - HV end-of-interrupt.
* @virq: The assigned Linux virq.
*
* Calls lv1_end_of_interrupt_ext().
*/
static void ps3_chip_eoi(struct irq_data *d)
{
const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
/* non-IPIs are EOIed here. */
if (!test_bit(63 - d->irq, &pd->ipi_mask))
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
}
/**
* ps3_irq_chip - Represents the ps3_bmp as a Linux struct irq_chip.
*/
static struct irq_chip ps3_irq_chip = {
.name = "ps3",
.irq_mask = ps3_chip_mask,
.irq_unmask = ps3_chip_unmask,
.irq_eoi = ps3_chip_eoi,
};
/**
* ps3_virq_setup - virq related setup.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @outlet: The HV outlet from the various create outlet routines.
* @virq: The assigned Linux virq.
*
* Calls irq_create_mapping() to get a virq and sets the chip data to
* ps3_private data.
*/
static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq)
{
int result;
struct ps3_private *pd;
/* This defines the default interrupt distribution policy. */
if (cpu == PS3_BINDING_CPU_ANY)
cpu = 0;
pd = &per_cpu(ps3_private, cpu);
*virq = irq_create_mapping(NULL, outlet);
if (!*virq) {
FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n",
__func__, __LINE__, outlet);
result = -ENOMEM;
goto fail_create;
}
DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
outlet, cpu, *virq);
result = irq_set_chip_data(*virq, pd);
if (result) {
FAIL("%s:%d: irq_set_chip_data failed\n",
__func__, __LINE__);
goto fail_set;
}
ps3_chip_mask(irq_get_irq_data(*virq));
return result;
fail_set:
irq_dispose_mapping(*virq);
fail_create:
return result;
}
/**
* ps3_virq_destroy - virq related teardown.
* @virq: The assigned Linux virq.
*
* Clears chip data and calls irq_dispose_mapping() for the virq.
*/
static int ps3_virq_destroy(unsigned int virq)
{
const struct ps3_private *pd = irq_get_chip_data(virq);
DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
irq_set_chip_data(virq, NULL);
irq_dispose_mapping(virq);
DBG("%s:%d <-\n", __func__, __LINE__);
return 0;
}
/**
* ps3_irq_plug_setup - Generic outlet and virq related setup.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @outlet: The HV outlet from the various create outlet routines.
* @virq: The assigned Linux virq.
*
* Sets up virq and connects the irq plug.
*/
int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq)
{
int result;
struct ps3_private *pd;
result = ps3_virq_setup(cpu, outlet, virq);
if (result) {
FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
goto fail_setup;
}
pd = irq_get_chip_data(*virq);
/* Binds outlet to cpu + virq. */
result = lv1_connect_irq_plug_ext(pd->ppe_id, pd->thread_id, *virq,
outlet, 0);
if (result) {
FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
result = -EPERM;
goto fail_connect;
}
return result;
fail_connect:
ps3_virq_destroy(*virq);
fail_setup:
return result;
}
EXPORT_SYMBOL_GPL(ps3_irq_plug_setup);
/**
* ps3_irq_plug_destroy - Generic outlet and virq related teardown.
* @virq: The assigned Linux virq.
*
* Disconnects the irq plug and tears down virq.
* Do not call for system bus event interrupts setup with
* ps3_sb_event_receive_port_setup().
*/
int ps3_irq_plug_destroy(unsigned int virq)
{
int result;
const struct ps3_private *pd = irq_get_chip_data(virq);
DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq);
if (result)
FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
ps3_virq_destroy(virq);
return result;
}
EXPORT_SYMBOL_GPL(ps3_irq_plug_destroy);
/**
* ps3_event_receive_port_setup - Setup an event receive port.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @virq: The assigned Linux virq.
*
* The virq can be used with lv1_connect_interrupt_event_receive_port() to
* arrange to receive interrupts from system-bus devices, or with
* ps3_send_event_locally() to signal events.
*/
int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
{
int result;
u64 outlet;
result = lv1_construct_event_receive_port(&outlet);
if (result) {
FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
*virq = 0;
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_event_receive_port_setup);
/**
* ps3_event_receive_port_destroy - Destroy an event receive port.
* @virq: The assigned Linux virq.
*
* Since ps3_event_receive_port_destroy destroys the receive port outlet,
* SB devices need to call disconnect_interrupt_event_receive_port() before
* this.
*/
int ps3_event_receive_port_destroy(unsigned int virq)
{
int result;
DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_destruct_event_receive_port(virq_to_hw(virq));
if (result)
FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
/*
* Don't call ps3_virq_destroy() here since ps3_smp_cleanup_cpu()
* calls from interrupt context (smp_call_function) when kexecing.
*/
DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
int ps3_send_event_locally(unsigned int virq)
{
return lv1_send_event_locally(virq_to_hw(virq));
}
/**
* ps3_sb_event_receive_port_setup - Setup a system bus event receive port.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @dev: The system bus device instance.
* @virq: The assigned Linux virq.
*
* An event irq represents a virtual device interrupt. The interrupt_id
* coresponds to the software interrupt number.
*/
int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
enum ps3_cpu_binding cpu, unsigned int *virq)
{
/* this should go in system-bus.c */
int result;
result = ps3_event_receive_port_setup(cpu, virq);
if (result)
return result;
result = lv1_connect_interrupt_event_receive_port(dev->bus_id,
dev->dev_id, virq_to_hw(*virq), dev->interrupt_id);
if (result) {
FAIL("%s:%d: lv1_connect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
ps3_event_receive_port_destroy(*virq);
*virq = 0;
return result;
}
DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, *virq);
return 0;
}
EXPORT_SYMBOL(ps3_sb_event_receive_port_setup);
int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
unsigned int virq)
{
/* this should go in system-bus.c */
int result;
DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, virq);
result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id,
dev->dev_id, virq_to_hw(virq), dev->interrupt_id);
if (result)
FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
result = ps3_event_receive_port_destroy(virq);
BUG_ON(result);
/*
* ps3_event_receive_port_destroy() destroys the IRQ plug,
* so don't call ps3_irq_plug_destroy() here.
*/
result = ps3_virq_destroy(virq);
BUG_ON(result);
DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
/**
* ps3_io_irq_setup - Setup a system bus io irq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @interrupt_id: The device interrupt id read from the system repository.
* @virq: The assigned Linux virq.
*
* An io irq represents a non-virtualized device interrupt. interrupt_id
* coresponds to the interrupt number of the interrupt controller.
*/
int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
unsigned int *virq)
{
int result;
u64 outlet;
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
if (result) {
FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_io_irq_setup);
int ps3_io_irq_destroy(unsigned int virq)
{
int result;
unsigned long outlet = virq_to_hw(virq);
ps3_chip_mask(irq_get_irq_data(virq));
/*
* lv1_destruct_io_irq_outlet() will destroy the IRQ plug,
* so call ps3_irq_plug_destroy() first.
*/
result = ps3_irq_plug_destroy(virq);
BUG_ON(result);
result = lv1_destruct_io_irq_outlet(outlet);
if (result)
FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
EXPORT_SYMBOL_GPL(ps3_io_irq_destroy);
/**
* ps3_vuart_irq_setup - Setup the system virtual uart virq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap.
* @virq: The assigned Linux virq.
*
* The system supports only a single virtual uart, so multiple calls without
* freeing the interrupt will return a wrong state error.
*/
int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
unsigned int *virq)
{
int result;
u64 outlet;
u64 lpar_addr;
BUG_ON(!is_kernel_addr((u64)virt_addr_bmp));
lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp));
result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
if (result) {
FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_vuart_irq_setup);
int ps3_vuart_irq_destroy(unsigned int virq)
{
int result;
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_deconfigure_virtual_uart_irq();
if (result) {
FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_destroy(virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_vuart_irq_destroy);
/**
* ps3_spe_irq_setup - Setup an spe virq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @spe_id: The spe_id returned from lv1_construct_logical_spe().
* @class: The spe interrupt class {0,1,2}.
* @virq: The assigned Linux virq.
*
*/
int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
unsigned int class, unsigned int *virq)
{
int result;
u64 outlet;
BUG_ON(class > 2);
result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
if (result) {
FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
int ps3_spe_irq_destroy(unsigned int virq)
{
int result;
ps3_chip_mask(irq_get_irq_data(virq));
result = ps3_irq_plug_destroy(virq);
BUG_ON(result);
return result;
}
#define PS3_INVALID_OUTLET ((irq_hw_number_t)-1)
#define PS3_PLUG_MAX 63
#if defined(DEBUG)
static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
const char* func, int line)
{
pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n",
func, line, header, cpu,
*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
*p & 0xffff);
}
static void __maybe_unused _dump_256_bmp(const char *header,
const u64 *p, unsigned cpu, const char* func, int line)
{
pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n",
func, line, header, cpu, p[0], p[1], p[2], p[3]);
}
#define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__)
static void _dump_bmp(struct ps3_private* pd, const char* func, int line)
{
unsigned long flags;
spin_lock_irqsave(&pd->bmp_lock, flags);
_dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line);
_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
static void __maybe_unused _dump_mask(struct ps3_private *pd,
const char* func, int line)
{
unsigned long flags;
spin_lock_irqsave(&pd->bmp_lock, flags);
_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#else
static void dump_bmp(struct ps3_private* pd) {};
#endif /* defined(DEBUG) */
static int ps3_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
virq);
irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq);
return 0;
}
genirq/irqdomain: Allow irq domain aliasing It is not uncommon (at least with the ARM stuff) to have a piece of hardware that implements different flavours of "interrupts". A typical example of this is the GICv3 ITS, which implements standard PCI/MSI support, but also some form of "generic MSI". So far, the PCI/MSI domain is registered using the ITS device_node, so that irq_find_host can return it. On the contrary, the raw MSI domain is not registered with an device_node, making it impossible to be looked up by another subsystem (obviously, using the same device_node twice would only result in confusion, as it is not defined which one irq_find_host would return). A solution to this is to "type" domains that may be aliasing, and to be able to lookup an device_node that matches a given type. For this, we introduce irq_find_matching_host() as a superset of irq_find_host: struct irq_domain *irq_find_matching_host(struct device_node *node, enum irq_domain_bus_token bus_token); where bus_token is the "type" we want to match the domain against (so far, only DOMAIN_BUS_ANY is defined). This result in some moderately invasive changes on the PPC side (which is the only user of the .match method). This has otherwise no functionnal change. Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Yijing Wang <wangyijing@huawei.com> Cc: Ma Jun <majun258@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Duc Dang <dhdang@apm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1438091186-10244-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-28 07:46:08 -06:00
static int ps3_host_match(struct irq_domain *h, struct device_node *np,
enum irq_domain_bus_token bus_token)
{
/* Match all */
return 1;
}
static const struct irq_domain_ops ps3_host_ops = {
.map = ps3_host_map,
.match = ps3_host_match,
};
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
{
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
set_bit(63 - virq, &pd->ipi_debug_brk_mask);
DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
cpu, virq, pd->ipi_debug_brk_mask);
}
void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
{
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
set_bit(63 - virq, &pd->ipi_mask);
DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
cpu, virq, pd->ipi_mask);
}
static unsigned int ps3_get_irq(void)
{
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-21 14:23:25 -06:00
struct ps3_private *pd = this_cpu_ptr(&ps3_private);
u64 x = (pd->bmp.status & pd->bmp.mask);
unsigned int plug;
/* check for ipi break first to stop this cpu ASAP */
if (x & pd->ipi_debug_brk_mask)
x &= pd->ipi_debug_brk_mask;
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
plug &= 0x3f;
if (unlikely(!plug)) {
DBG("%s:%d: no plug found: thread_id %llu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
return 0;
}
#if defined(DEBUG)
if (unlikely(plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX)) {
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
BUG();
}
#endif
/* IPIs are EOIed here. */
if (test_bit(63 - plug, &pd->ipi_mask))
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
return plug;
}
void __init ps3_init_IRQ(void)
{
int result;
unsigned cpu;
struct irq_domain *host;
host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL);
irq_set_default_host(host);
for_each_possible_cpu(cpu) {
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
lv1_get_logical_ppe_id(&pd->ppe_id);
pd->thread_id = get_hard_smp_processor_id(cpu);
spin_lock_init(&pd->bmp_lock);
DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
__func__, __LINE__, pd->ppe_id, pd->thread_id,
ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
result = lv1_configure_irq_state_bitmap(pd->ppe_id,
pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
if (result)
FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:"
" %s\n", __func__, __LINE__,
ps3_result(result));
}
ppc_md.get_irq = ps3_get_irq;
}
void ps3_shutdown_IRQ(int cpu)
{
int result;
u64 ppe_id;
u64 thread_id = get_hard_smp_processor_id(cpu);
lv1_get_logical_ppe_id(&ppe_id);
result = lv1_configure_irq_state_bitmap(ppe_id, thread_id, 0);
DBG("%s:%d: lv1_configure_irq_state_bitmap (%llu:%llu/%d) %s\n", __func__,
__LINE__, ppe_id, thread_id, cpu, ps3_result(result));
}