redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/mips/bcm47xx/board.c

363 lines
14 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 08:07:57 -06:00
// SPDX-License-Identifier: GPL-2.0
MIPS: bcm47xx: Include missing errno.h for ENXIO Fixes the following build problen on allmodconfig: arch/mips/bcm47xx/board.c: In function 'bcm47xx_board_detect': arch/mips/bcm47xx/board.c:291:14: error: 'ENXIO' undeclared (first use in this function) Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6571/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-02-19 03:17:18 -07:00
#include <linux/errno.h>
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
#include <linux/export.h>
#include <linux/string.h>
MIPS: BCM47xx: Move NVRAM header to the include/linux/. There are two reasons for having this header in the common place: 1) Simplifying drivers that read NVRAM entries. We will be able to safely call bcm47xx_nvram_* functions without #ifdef-s. 2) Getting NVRAM driver out of MIPS arch code. This is needed to support BCM5301X arch which also requires this NVRAM driver. Patch for that will follow once we get is reviewed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul@pwsan.com> Cc: linux-soc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8619/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-30 23:58:18 -07:00
#include <bcm47xx.h>
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
#include <bcm47xx_board.h>
struct bcm47xx_board_type {
const enum bcm47xx_board board;
const char *name;
};
struct bcm47xx_board_type_list1 {
struct bcm47xx_board_type board;
const char *value1;
};
struct bcm47xx_board_type_list2 {
struct bcm47xx_board_type board;
const char *value1;
const char *value2;
};
struct bcm47xx_board_type_list3 {
struct bcm47xx_board_type board;
const char *value1;
const char *value2;
const char *value3;
};
struct bcm47xx_board_store {
enum bcm47xx_board board;
char name[BCM47XX_BOARD_MAX_NAME];
};
/* model_name */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_model_name[] __initconst = {
{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130"},
{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
/* hardware_version */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_hardware_version[] __initconst = {
MIPS: BCM47XX: fix detection for some boards When a nvram reset was performed from CFE, it sometimes does not contain the productid value in nvram, but it still contains hardware_version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6316/
2014-01-03 12:41:58 -07:00
{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RTN10U"},
MIPS: BCM47XX: Devices database update for 3.17 Detect more devices and register leds & buttons for them. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7394/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-17 15:24:30 -06:00
{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RTN10D"},
MIPS: BCM47XX: fix detection for some boards When a nvram reset was performed from CFE, it sometimes does not contain the productid value in nvram, but it still contains hardware_version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6316/
2014-01-03 12:41:58 -07:00
{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12"},
{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RTN12B1"},
{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RTN12C1"},
{{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RTN12D1"},
{{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RTN12HP"},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-"},
{{BCM47XX_BOARD_ASUS_WL320GE, "Asus WL320GE"}, "WL320G-"},
{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-"},
{{BCM47XX_BOARD_ASUS_WL500GD, "Asus WL500GD"}, "WL500gd-"},
{{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-"},
{{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-"},
{{BCM47XX_BOARD_ASUS_WL500W, "Asus WL500W"}, "WL500gW-"},
{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-"},
{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-"},
MIPS: BCM47XX: Add Belkin F7Dxxxx board detection Add a few Belkin F7Dxxxx entries, with F7D4401 sourced from online documentation and the "F7D7302" being observed. F7D3301, F7D3302, and F7D4302 are reasonable guesses which are unlikely to cause mis-detection. Signed-off-by: Cody P Schafer <devel@codyps.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: zajec5@gmail.com Cc: Cody P Schafer <devel@codyps.com> Patchwork: https://patchwork.linux-mips.org/patch/6594/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-02 09:49:29 -07:00
{{BCM47XX_BOARD_BELKIN_F7D3301, "Belkin F7D3301"}, "F7D3301"},
{{BCM47XX_BOARD_BELKIN_F7D3302, "Belkin F7D3302"}, "F7D3302"},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301"},
MIPS: BCM47XX: Add Belkin F7Dxxxx board detection Add a few Belkin F7Dxxxx entries, with F7D4401 sourced from online documentation and the "F7D7302" being observed. F7D3301, F7D3302, and F7D4302 are reasonable guesses which are unlikely to cause mis-detection. Signed-off-by: Cody P Schafer <devel@codyps.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: zajec5@gmail.com Cc: Cody P Schafer <devel@codyps.com> Patchwork: https://patchwork.linux-mips.org/patch/6594/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-02 09:49:29 -07:00
{{BCM47XX_BOARD_BELKIN_F7D4302, "Belkin F7D4302"}, "F7D4302"},
{{BCM47XX_BOARD_BELKIN_F7D4401, "Belkin F7D4401"}, "F7D4401"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500G This patch adds detection for the Microsoft MN-700 and the Asus WL500G router. This is based on some old code from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-28 16:12:09 -06:00
/* hardware_version, boardnum */
static const
struct bcm47xx_board_type_list2 bcm47xx_board_list_hw_version_num[] __initconst = {
{{BCM47XX_BOARD_MICROSOFT_MN700, "Microsoft MN-700"}, "WL500-", "mn700"},
{{BCM47XX_BOARD_ASUS_WL500G, "Asus WL500G"}, "WL500-", "asusX"},
{ {0}, NULL},
};
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
/* productid */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_productid[] __initconst = {
{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U"},
{{BCM47XX_BOARD_ASUS_RTN10, "Asus RT-N10"}, "RT-N10"},
{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D"},
{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U"},
{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16"},
{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53"},
{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U"},
{{BCM47XX_BOARD_ASUS_WL300G, "Asus WL300G"}, "WL300g"},
{{BCM47XX_BOARD_ASUS_WLHDD, "Asus WLHDD"}, "WLHDD"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
/* ModelId */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_ModelId[] __initconst = {
MIPS: BCM47XX: Devices database update for 3.17 Detect more devices and register leds & buttons for them. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7394/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-17 15:24:30 -06:00
{{BCM47XX_BOARD_DELL_TM2300, "Dell TrueMobile 2300"}, "WX-5565"},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G"},
{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP"},
{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
/* melco_id or buf1falo_id */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_melco_id[] __initconst = {
{{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332"},
{{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd"},
{{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093"},
{{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182"},
{{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189"},
{{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129"},
{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120"},
{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083"},
{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
/* boot_hw_model, boot_hw_ver */
static const
struct bcm47xx_board_type_list2 bcm47xx_board_list_boot_hw[] __initconst = {
/* like WRT160N v3.0 */
{{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"},
/* like WRT310N v2.0 */
{{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"},
{{BCM47XX_BOARD_LINKSYS_E900V1, "Linksys E900 V1"}, "E900", "1.0"},
/* like WRT160N v3.0 */
{{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"},
{{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"},
{{BCM47XX_BOARD_LINKSYS_E1000V21, "Linksys E1000 V2.1"}, "E1000", "2.1"},
{{BCM47XX_BOARD_LINKSYS_E1200V2, "Linksys E1200 V2"}, "E1200", "2.0"},
{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
/* like WRT610N v2.0 */
{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"},
{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
{{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"},
{{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"},
{{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"},
{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
{{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
/* board_id */
static const
struct bcm47xx_board_type_list1 bcm47xx_board_list_board_id[] __initconst = {
MIPS: BCM47XX: Add Luxul devices to the database So far only Luxul XWR-1750 router was supported. This adds a set of other Luxul devices based on BCM47XX. It's a standard support for LEDs and buttons. Signed-off-by: Dan Haab <dhaab@luxul.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15106/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-01-23 12:50:38 -07:00
{{BCM47XX_BOARD_LUXUL_ABR_4400_V1, "Luxul ABR-4400 V1"}, "luxul_abr4400_v1"},
{{BCM47XX_BOARD_LUXUL_XAP_310_V1, "Luxul XAP-310 V1"}, "luxul_xap310_v1"},
{{BCM47XX_BOARD_LUXUL_XAP_1210_V1, "Luxul XAP-1210 V1"}, "luxul_xap1210_v1"},
{{BCM47XX_BOARD_LUXUL_XAP_1230_V1, "Luxul XAP-1230 V1"}, "luxul_xap1230_v1"},
{{BCM47XX_BOARD_LUXUL_XAP_1240_V1, "Luxul XAP-1240 V1"}, "luxul_xap1240_v1"},
{{BCM47XX_BOARD_LUXUL_XAP_1500_V1, "Luxul XAP-1500 V1"}, "luxul_xap1500_v1"},
{{BCM47XX_BOARD_LUXUL_XBR_4400_V1, "Luxul XBR-4400 V1"}, "luxul_xbr4400_v1"},
{{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
{{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
MIPS: BCM47XX: Support Luxul XWR-1750 board Signed-off-by: Dan Haab <dhaab@luxul.com> Acked-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Dan Haab <dhaab@luxul.com> Patchwork: https://patchwork.linux-mips.org/patch/9831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-22 13:58:33 -06:00
{{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
MIPS: BCM47XX: Add support for Netgear R6200 V1 The Netgear R6200 v1 uses a BCM4718A1 SOC and a BCM4352/BCM4360 for 5GHz wireless. This patch adds support for detecting this model board and registers the 3 buttons. I have tested that the device can boot kernels 4.14 and 4.19 under OpenWRT. There is one issue that the LEDs on the device are controlled by a 74HC164 that uses bit-banging instead of SPI so it isn't accessible to the kernel without adding a workaround. Without any workaround the device on boot will flash all LEDs once then the power LED will remain amber as all other LEDs stay off. Signed-off-by: Edward Matijevic <motolav@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> [paul.burton@mips.com: - Sort bcm47xx_board_list_board_id alphabetically by board type. - Fix whitespace. - Wrap commit message & drop OpenWRT-based justification for bcm47xx_board_list_board_id being mis-sorted.] Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-06-16 23:26:46 -06:00
{{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
MIPS: BCM47xx: Devices database update for 4.1 (or 4.2?) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 10:18:02 -06:00
{{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
MIPS: BCM47xx: Devices database update for 4.1 (or 4.2?) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 10:18:02 -06:00
{{BCM47XX_BOARD_NETGEAR_WNDR3400_V3, "Netgear WNDR3400 V3"}, "U12H208T00_NETGEAR"},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4500V1, "Netgear WNDR4500 V1"}, "U12H189T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNDR4500V2, "Netgear WNDR4500 V2"}, "U12H224T00_NETGEAR"},
MIPS: BCM47XX: Add support for Netgear WNR1000 V3 This adds support for detecting this model board and registers some LEDs and buttons. There are two uncommon things regarding this device: 1) It can use two different "board_id" ID values. Unit I have uses "U12H139T00_NETGEAR" value. This magic is also used in firmware file header. There are two reports (one from an OpenWrt user) of a different "U12H139T50_NETGEAR" magic though. 2) Power LEDs share GPIOs with buttons. Amber one seems to share GPIO 2 with WPS button and green one seems to share GPIO 3 with reset button. It remains unknown how to support them and handle buttons at the same time. For that reason they aren't added to the list of supported LEDs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/19004/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-04-08 14:57:32 -06:00
{{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR1000_V3, "Netgear WNR1000 V3"}, "U12H139T50_NETGEAR"},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR"},
{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
/* boardtype, boardnum, boardrev */
static const
struct bcm47xx_board_type_list3 bcm47xx_board_list_board[] __initconst = {
{{BCM47XX_BOARD_HUAWEI_E970, "Huawei E970"}, "0x048e", "0x5347", "0x11"},
{{BCM47XX_BOARD_PHICOMM_M1, "Phicomm M1"}, "0x0590", "80", "0x1104"},
{{BCM47XX_BOARD_ZTE_H218N, "ZTE H218N"}, "0x053d", "1234", "0x1305"},
MIPS: BCM47XX: fix detection for some boards When a nvram reset was performed from CFE, it sometimes does not contain the productid value in nvram, but it still contains hardware_version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6316/
2014-01-03 12:41:58 -07:00
{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "0x04CF", "3500", "02"},
MIPS: BCM47xx: Distinguish WRT54G series devices by boardtype Catalin reported that GPIOs used by bcm47xx don't match layout of his WRT54GS V1.0 board. It seems we need to distinguish these 54G* devices. Reported-by: Catalin Patulea <cat@vv.carleton.ca> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/7112/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-06-19 23:56:39 -06:00
{{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101, "Linksys WRT54G/GS/GL"}, "0x0101", "42", "0x10"},
{{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467, "Linksys WRT54G/GS/GL"}, "0x0467", "42", "0x10"},
{{BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0708, "Linksys WRT54G/GS/GL"}, "0x0708", "42", "0x10"},
MIPS: BCM47XX: fix sparse warnings in board.c This fixes the following sparse warnings: arch/mips/bcm47xx/board.c:39:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:46:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:53:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:78:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:99:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:109:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:124:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:155:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:177:16: warning: Using plain integer as NULL pointer arch/mips/bcm47xx/board.c:189:16: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6318/
2014-01-03 12:42:00 -07:00
{ {0}, NULL},
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
};
MIPS: BCM47XX: Add detection and GPIO config for Siemens SE505v2 This adds board detection for the Siemens SE505v2 and the led gpio configuration. This board does not have any buttons. This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: zajec5@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6593/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-02 09:49:28 -07:00
/* boardtype, boardrev */
static const
struct bcm47xx_board_type_list2 bcm47xx_board_list_board_type_rev[] __initconst = {
{{BCM47XX_BOARD_SIEMENS_SE505V2, "Siemens SE505 V2"}, "0x0101", "0x10"},
{ {0}, NULL},
};
MIPS: BCM47xx: Keep ID entries for non-standard devices together Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9655/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 10:18:01 -06:00
/*
* Some devices don't use any common NVRAM entry for identification and they
* have only one model specific variable.
* They don't deserve own arrays, let's group them there using key-value array.
*/
static const
struct bcm47xx_board_type_list2 bcm47xx_board_list_key_value[] __initconst = {
{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "model_no", "WL700"},
MIPS: BCM47xx: Devices database update for 4.1 (or 4.2?) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 10:18:02 -06:00
{{BCM47XX_BOARD_LINKSYS_WRT300N_V1, "Linksys WRT300N V1"}, "router_name", "WRT300N"},
{{BCM47XX_BOARD_LINKSYS_WRT600N_V11, "Linksys WRT600N V1.1"}, "Model_Name", "WRT600N"},
MIPS: BCM47xx: Keep ID entries for non-standard devices together Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9655/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 10:18:01 -06:00
{{BCM47XX_BOARD_LINKSYS_WRTSL54GS, "Linksys WRTSL54GS"}, "machine_name", "WRTSL54GS"},
{ {0}, NULL},
};
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
static const
struct bcm47xx_board_type bcm47xx_board_unknown[] __initconst = {
{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
};
static struct bcm47xx_board_store bcm47xx_board = {BCM47XX_BOARD_NO, "Unknown Board"};
static __init const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
{
char buf1[30];
char buf2[30];
char buf3[30];
const struct bcm47xx_board_type_list1 *e1;
const struct bcm47xx_board_type_list2 *e2;
const struct bcm47xx_board_type_list3 *e3;
if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_model_name; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
return &e1->board;
}
}
if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_hardware_version; e1->value1; e1++) {
if (strstarts(buf1, e1->value1))
return &e1->board;
}
}
MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500G This patch adds detection for the Microsoft MN-700 and the Asus WL500G router. This is based on some old code from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-28 16:12:09 -06:00
if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0 &&
MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G Since the day of adding this code it was broken. We were iterating over a wrong array and checking for wrong NVRAM entry. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9654/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 08:01:02 -06:00
bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0) {
for (e2 = bcm47xx_board_list_hw_version_num; e2->value1; e2++) {
MIPS: BCM47XX: add Microsoft MN-700 and Asus WL500G This patch adds detection for the Microsoft MN-700 and the Asus WL500G router. This is based on some old code from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-28 16:12:09 -06:00
if (!strstarts(buf1, e2->value1) &&
!strcmp(buf2, e2->value2))
return &e2->board;
}
}
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_productid; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
return &e1->board;
}
}
if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_ModelId; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
return &e1->board;
}
}
if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 ||
bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) {
/* buffalo hardware, check id for specific hardware matches */
for (e1 = bcm47xx_board_list_melco_id; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
return &e1->board;
}
}
if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 &&
bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) {
for (e2 = bcm47xx_board_list_boot_hw; e2->value1; e2++) {
if (!strcmp(buf1, e2->value1) &&
!strcmp(buf2, e2->value2))
return &e2->board;
}
}
if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) {
for (e1 = bcm47xx_board_list_board_id; e1->value1; e1++) {
if (!strcmp(buf1, e1->value1))
return &e1->board;
}
}
if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
bcm47xx_nvram_getenv("boardnum", buf2, sizeof(buf2)) >= 0 &&
bcm47xx_nvram_getenv("boardrev", buf3, sizeof(buf3)) >= 0) {
for (e3 = bcm47xx_board_list_board; e3->value1; e3++) {
if (!strcmp(buf1, e3->value1) &&
!strcmp(buf2, e3->value2) &&
!strcmp(buf3, e3->value3))
return &e3->board;
}
}
MIPS: BCM47XX: Add detection and GPIO config for Siemens SE505v2 This adds board detection for the Siemens SE505v2 and the led gpio configuration. This board does not have any buttons. This is based on OpenWrt broadcom-diag and Manuel Munz's nvram dump. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: zajec5@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/6593/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-02 09:49:28 -07:00
if (bcm47xx_nvram_getenv("boardtype", buf1, sizeof(buf1)) >= 0 &&
bcm47xx_nvram_getenv("boardrev", buf2, sizeof(buf2)) >= 0 &&
bcm47xx_nvram_getenv("boardnum", buf3, sizeof(buf3)) == -ENOENT) {
for (e2 = bcm47xx_board_list_board_type_rev; e2->value1; e2++) {
if (!strcmp(buf1, e2->value1) &&
!strcmp(buf2, e2->value2))
return &e2->board;
}
}
MIPS: BCM47xx: Keep ID entries for non-standard devices together Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/9655/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-04-01 10:18:01 -06:00
for (e2 = bcm47xx_board_list_key_value; e2->value1; e2++) {
if (bcm47xx_nvram_getenv(e2->value1, buf1, sizeof(buf1)) >= 0) {
if (!strcmp(buf1, e2->value2))
return &e2->board;
}
}
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
return bcm47xx_board_unknown;
}
void __init bcm47xx_board_detect(void)
{
int err;
char buf[10];
const struct bcm47xx_board_type *board_detected;
if (bcm47xx_board.board != BCM47XX_BOARD_NO)
return;
/* check if the nvram is available */
err = bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf));
/* init of nvram failed, probably too early now */
MIPS: BCM47XX: Fix coding style to match kernel standards [ralf@linux-mips.org: Fixed conflicts.] Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Paul Walmsley <paul@pwsan.com> Patchwork: https://patchwork.linux-mips.org/patch/8665/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-10 09:38:26 -07:00
if (err == -ENXIO)
MIPS: BCM47XX: Add board detection Detect on which board this code is running based on some nvram settings. This is needed to start board specific workarounds and configure the leds and buttons which are on different gpios on every board. This patches add some boards we have seen, but there are many more. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5840 Patchwork: https://patchwork.linux-mips.org/patch/5855/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-09-18 05:29:57 -06:00
return;
board_detected = bcm47xx_board_get_nvram();
bcm47xx_board.board = board_detected->board;
strlcpy(bcm47xx_board.name, board_detected->name,
BCM47XX_BOARD_MAX_NAME);
}
enum bcm47xx_board bcm47xx_board_get(void)
{
return bcm47xx_board.board;
}
EXPORT_SYMBOL(bcm47xx_board_get);
const char *bcm47xx_board_get_name(void)
{
return bcm47xx_board.name;
}
EXPORT_SYMBOL(bcm47xx_board_get_name);