redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/clk/rockchip/clk-pll.c

972 lines
28 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 00:55:06 -06:00
// SPDX-License-Identifier: GPL-2.0-or-later
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
/*
* Copyright (c) 2014 MundoReader S.L.
* Author: Heiko Stuebner <heiko@sntech.de>
*
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
* Copyright (c) 2015 Rockchip Electronics Co. Ltd.
* Author: Xing Zheng <zhengxing@rock-chips.com>
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
*/
#include <asm/div64.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/clk-provider.h>
#include <linux/regmap.h>
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
#include <linux/clk.h>
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
#include "clk.h"
#define PLL_MODE_MASK 0x3
#define PLL_MODE_SLOW 0x0
#define PLL_MODE_NORM 0x1
#define PLL_MODE_DEEP 0x2
clk: rockchip: add new pll-type for rk3328 The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-28 19:45:10 -07:00
#define PLL_RK3328_MODE_MASK 0x1
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
struct rockchip_clk_pll {
struct clk_hw hw;
struct clk_mux pll_mux;
const struct clk_ops *pll_mux_ops;
struct notifier_block clk_nb;
void __iomem *reg_base;
int lock_offset;
unsigned int lock_shift;
enum rockchip_pll_type type;
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:50 -07:00
u8 flags;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
const struct rockchip_pll_rate_table *rate_table;
unsigned int rate_count;
spinlock_t *lock;
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-08 19:37:04 -07:00
struct rockchip_clk_provider *ctx;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
};
#define to_rockchip_clk_pll(_hw) container_of(_hw, struct rockchip_clk_pll, hw)
#define to_rockchip_clk_pll_nb(nb) \
container_of(nb, struct rockchip_clk_pll, clk_nb)
static const struct rockchip_pll_rate_table *rockchip_get_pll_settings(
struct rockchip_clk_pll *pll, unsigned long rate)
{
const struct rockchip_pll_rate_table *rate_table = pll->rate_table;
int i;
for (i = 0; i < pll->rate_count; i++) {
if (rate == rate_table[i].rate)
return &rate_table[i];
}
return NULL;
}
static long rockchip_pll_round_rate(struct clk_hw *hw,
unsigned long drate, unsigned long *prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate_table = pll->rate_table;
int i;
/* Assumming rate_table is in descending order */
for (i = 0; i < pll->rate_count; i++) {
if (drate >= rate_table[i].rate)
return rate_table[i].rate;
}
/* return minimum supported value */
return rate_table[i - 1].rate;
}
/*
* Wait for the pll to reach the locked state.
* The calling set_rate function is responsible for making sure the
* grf regmap is available.
*/
static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
{
clk: rockchip: simplify GRF handling in pll clocks With the previous commit, the clock drivers now know at init time if the GRF regmap is available. That means if it isn't available then, it also won't become available later and we can therefore switch PLLs, that need the GRF for the lock-status, to read-only mode - similar behaviour as the aborting of rate changes we did before. This saves some conditionals on every rate change and we can also drop the rockchip_clk_get_grf function completely. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-15 09:55:41 -06:00
struct regmap *grf = pll->ctx->grf;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
unsigned int val;
int delay = 24000000, ret;
while (delay > 0) {
ret = regmap_read(grf, pll->lock_offset, &val);
if (ret) {
pr_err("%s: failed to read pll lock status: %d\n",
__func__, ret);
return ret;
}
if (val & BIT(pll->lock_shift))
return 0;
delay--;
}
pr_err("%s: timeout waiting for pll to lock\n", __func__);
return -ETIMEDOUT;
}
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
/**
* PLL used in RK3036
*/
#define RK3036_PLLCON(i) (i * 0x4)
#define RK3036_PLLCON0_FBDIV_MASK 0xfff
#define RK3036_PLLCON0_FBDIV_SHIFT 0
#define RK3036_PLLCON0_POSTDIV1_MASK 0x7
#define RK3036_PLLCON0_POSTDIV1_SHIFT 12
#define RK3036_PLLCON1_REFDIV_MASK 0x3f
#define RK3036_PLLCON1_REFDIV_SHIFT 0
#define RK3036_PLLCON1_POSTDIV2_MASK 0x7
#define RK3036_PLLCON1_POSTDIV2_SHIFT 6
#define RK3036_PLLCON1_DSMPD_MASK 0x1
#define RK3036_PLLCON1_DSMPD_SHIFT 12
#define RK3036_PLLCON2_FRAC_MASK 0xffffff
#define RK3036_PLLCON2_FRAC_SHIFT 0
#define RK3036_PLLCON1_PWRDOWN (1 << 13)
static void rockchip_rk3036_pll_get_params(struct rockchip_clk_pll *pll,
struct rockchip_pll_rate_table *rate)
{
u32 pllcon;
pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(0));
rate->fbdiv = ((pllcon >> RK3036_PLLCON0_FBDIV_SHIFT)
& RK3036_PLLCON0_FBDIV_MASK);
rate->postdiv1 = ((pllcon >> RK3036_PLLCON0_POSTDIV1_SHIFT)
& RK3036_PLLCON0_POSTDIV1_MASK);
pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
rate->refdiv = ((pllcon >> RK3036_PLLCON1_REFDIV_SHIFT)
& RK3036_PLLCON1_REFDIV_MASK);
rate->postdiv2 = ((pllcon >> RK3036_PLLCON1_POSTDIV2_SHIFT)
& RK3036_PLLCON1_POSTDIV2_MASK);
rate->dsmpd = ((pllcon >> RK3036_PLLCON1_DSMPD_SHIFT)
& RK3036_PLLCON1_DSMPD_MASK);
pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
rate->frac = ((pllcon >> RK3036_PLLCON2_FRAC_SHIFT)
& RK3036_PLLCON2_FRAC_MASK);
}
static unsigned long rockchip_rk3036_pll_recalc_rate(struct clk_hw *hw,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
struct rockchip_pll_rate_table cur;
u64 rate64 = prate;
rockchip_rk3036_pll_get_params(pll, &cur);
rate64 *= cur.fbdiv;
do_div(rate64, cur.refdiv);
if (cur.dsmpd == 0) {
/* fractional mode */
u64 frac_rate64 = prate * cur.frac;
do_div(frac_rate64, cur.refdiv);
rate64 += frac_rate64 >> 24;
}
do_div(rate64, cur.postdiv1);
do_div(rate64, cur.postdiv2);
return (unsigned long)rate64;
}
static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
const struct rockchip_pll_rate_table *rate)
{
const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
struct clk_mux *pll_mux = &pll->pll_mux;
struct rockchip_pll_rate_table cur;
u32 pllcon;
int rate_change_remuxed = 0;
int cur_parent;
int ret;
pr_debug("%s: rate settings for %lu fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
__func__, rate->rate, rate->fbdiv, rate->postdiv1, rate->refdiv,
rate->postdiv2, rate->dsmpd, rate->frac);
rockchip_rk3036_pll_get_params(pll, &cur);
cur.rate = 0;
cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
if (cur_parent == PLL_MODE_NORM) {
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
rate_change_remuxed = 1;
}
/* update pll values */
writel_relaxed(HIWORD_UPDATE(rate->fbdiv, RK3036_PLLCON0_FBDIV_MASK,
RK3036_PLLCON0_FBDIV_SHIFT) |
HIWORD_UPDATE(rate->postdiv1, RK3036_PLLCON0_POSTDIV1_MASK,
RK3036_PLLCON0_POSTDIV1_SHIFT),
pll->reg_base + RK3036_PLLCON(0));
writel_relaxed(HIWORD_UPDATE(rate->refdiv, RK3036_PLLCON1_REFDIV_MASK,
RK3036_PLLCON1_REFDIV_SHIFT) |
HIWORD_UPDATE(rate->postdiv2, RK3036_PLLCON1_POSTDIV2_MASK,
RK3036_PLLCON1_POSTDIV2_SHIFT) |
HIWORD_UPDATE(rate->dsmpd, RK3036_PLLCON1_DSMPD_MASK,
RK3036_PLLCON1_DSMPD_SHIFT),
pll->reg_base + RK3036_PLLCON(1));
/* GPLL CON2 is not HIWORD_MASK */
pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
pllcon &= ~(RK3036_PLLCON2_FRAC_MASK << RK3036_PLLCON2_FRAC_SHIFT);
pllcon |= rate->frac << RK3036_PLLCON2_FRAC_SHIFT;
writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
/* wait for the pll to lock */
ret = rockchip_pll_wait_lock(pll);
if (ret) {
clk: rockchip: fix of spelling mistake on unsuccessful in pll clock type fix spelling mistake, unsucessful -> unsuccessful Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-24 16:44:13 -06:00
pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
__func__);
rockchip_rk3036_pll_set_params(pll, &cur);
}
if (rate_change_remuxed)
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
return ret;
}
static int rockchip_rk3036_pll_set_rate(struct clk_hw *hw, unsigned long drate,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
clk: rockchip: drop old_rate calculation on pll rate changes Previously when everything happened in the set_rate callbacks itself we needed the old_rate value for the possible rate rollback, so that made it easy to also use it in the debug output. Now with the param-handling being done in separate functions, reading and recalculating the current pll rate only to use it in a debug message that won't get displayed in regular cases anyway is quite a waste. Therefore drop that value from the debug output. In the worst case that previous rate will have been displayed on the rate change before. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-15 10:34:56 -06:00
pr_debug("%s: changing %s to %lu with a parent rate of %lu\n",
__func__, __clk_get_name(hw->clk), drate, prate);
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
/* Get required rate settings from table */
rate = rockchip_get_pll_settings(pll, drate);
if (!rate) {
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
drate, __clk_get_name(hw->clk));
return -EINVAL;
}
return rockchip_rk3036_pll_set_params(pll, rate);
}
static int rockchip_rk3036_pll_enable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
pll->reg_base + RK3036_PLLCON(1));
clk: rockchip: add pll_wait_lock for pll_enable If pll is power down,when power up pll need wait pll lock. The reference documents section: PLL frequency change and lock check Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-02-21 19:59:55 -07:00
rockchip_pll_wait_lock(pll);
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
return 0;
}
static void rockchip_rk3036_pll_disable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(RK3036_PLLCON1_PWRDOWN,
RK3036_PLLCON1_PWRDOWN, 0),
pll->reg_base + RK3036_PLLCON(1));
}
static int rockchip_rk3036_pll_is_enabled(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
u32 pllcon = readl(pll->reg_base + RK3036_PLLCON(1));
return !(pllcon & RK3036_PLLCON1_PWRDOWN);
}
static void rockchip_rk3036_pll_init(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
struct rockchip_pll_rate_table cur;
unsigned long drate;
if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE))
return;
drate = clk_hw_get_rate(hw);
rate = rockchip_get_pll_settings(pll, drate);
/* when no rate setting for the current rate, rely on clk_set_rate */
if (!rate)
return;
rockchip_rk3036_pll_get_params(pll, &cur);
pr_debug("%s: pll %s@%lu: Hz\n", __func__, __clk_get_name(hw->clk),
drate);
pr_debug("old - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
cur.fbdiv, cur.postdiv1, cur.refdiv, cur.postdiv2,
cur.dsmpd, cur.frac);
pr_debug("new - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
rate->fbdiv, rate->postdiv1, rate->refdiv, rate->postdiv2,
rate->dsmpd, rate->frac);
if (rate->fbdiv != cur.fbdiv || rate->postdiv1 != cur.postdiv1 ||
rate->refdiv != cur.refdiv || rate->postdiv2 != cur.postdiv2 ||
clk: rockchip: Ignore frac divisor for PLL equivalence when it's unused Rockchip RK3399 PLLs can be used in two separate modes: integral and fractional. We can select between these two modes with the unambiguously named DSMPD bit. During boot, we check all PLL settings to confirm that they match our PLL table for that frequency, and reinitialize the PLLs where they don't. The settings checked for this include the fractional divider field that is only used in fractional mode, even if we're in integral mode (DSMPD = 1) and that field has no effect. This patch changes the check to only compare the fractional divider if we're actually in fractional mode. This way, we won't reinitialize the PLL in cases where there's absolutely no reason for that, which may avoid glitching child clocks that should better not be glitched (e.g. PWM regulators). Signed-off-by: Julius Werner <jwerner@chromium.org> [cloned the fix to the pretty similar rk3036 pll] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-02 17:43:24 -06:00
rate->dsmpd != cur.dsmpd ||
(!cur.dsmpd && (rate->frac != cur.frac))) {
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
struct clk *parent = clk_get_parent(hw->clk);
if (!parent) {
pr_warn("%s: parent of %s not available\n",
__func__, __clk_get_name(hw->clk));
return;
}
pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n",
__func__, __clk_get_name(hw->clk));
rockchip_rk3036_pll_set_params(pll, rate);
}
}
static const struct clk_ops rockchip_rk3036_pll_clk_norate_ops = {
.recalc_rate = rockchip_rk3036_pll_recalc_rate,
.enable = rockchip_rk3036_pll_enable,
.disable = rockchip_rk3036_pll_disable,
.is_enabled = rockchip_rk3036_pll_is_enabled,
};
static const struct clk_ops rockchip_rk3036_pll_clk_ops = {
.recalc_rate = rockchip_rk3036_pll_recalc_rate,
.round_rate = rockchip_pll_round_rate,
.set_rate = rockchip_rk3036_pll_set_rate,
.enable = rockchip_rk3036_pll_enable,
.disable = rockchip_rk3036_pll_disable,
.is_enabled = rockchip_rk3036_pll_is_enabled,
.init = rockchip_rk3036_pll_init,
};
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
/**
* PLL used in RK3066, RK3188 and RK3288
*/
#define RK3066_PLL_RESET_DELAY(nr) ((nr * 500) / 24 + 1)
#define RK3066_PLLCON(i) (i * 0x4)
#define RK3066_PLLCON0_OD_MASK 0xf
#define RK3066_PLLCON0_OD_SHIFT 0
#define RK3066_PLLCON0_NR_MASK 0x3f
#define RK3066_PLLCON0_NR_SHIFT 8
#define RK3066_PLLCON1_NF_MASK 0x1fff
#define RK3066_PLLCON1_NF_SHIFT 0
clk: rockchip: Fix PLL bandwidth In the TRM we see that BWADJ is "a 12-bit bus that selects the values 1-4096 for the bandwidth divider (NB)": NB = BWADJ[11:0] + 1 The recommended setting of NB: NB = NF / 2. So: NB = NF / 2 BWADJ[11:0] + 1 = NF / 2 BWADJ[11:0] = NF / 2 - 1 Right now, we have: { \ .rate = _rate##U, \ .nr = _nr, \ .nf = _nf, \ .no = _no, \ .bwadj = (_nf >> 1), \ } That means we set bwadj to NF / 2, not NF / 2 - 1 All of this is a bit confusing because we specify "NR" (the 1-based value), "NF" (the 1-based value), "NO" (the 1-based value), but "BWADJ" (the 0-based value) instead of "NB" (the 1-based value). Let's change to working with "NB" and fix the off by one error. This may affect PLL jitter in a small way (hopefully for the better). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-21 14:41:23 -06:00
#define RK3066_PLLCON2_NB_MASK 0xfff
#define RK3066_PLLCON2_NB_SHIFT 0
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
#define RK3066_PLLCON3_RESET (1 << 5)
#define RK3066_PLLCON3_PWRDOWN (1 << 1)
#define RK3066_PLLCON3_BYPASS (1 << 0)
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
static void rockchip_rk3066_pll_get_params(struct rockchip_clk_pll *pll,
struct rockchip_pll_rate_table *rate)
{
u32 pllcon;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(0));
rate->nr = ((pllcon >> RK3066_PLLCON0_NR_SHIFT)
& RK3066_PLLCON0_NR_MASK) + 1;
rate->no = ((pllcon >> RK3066_PLLCON0_OD_SHIFT)
& RK3066_PLLCON0_OD_MASK) + 1;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(1));
rate->nf = ((pllcon >> RK3066_PLLCON1_NF_SHIFT)
& RK3066_PLLCON1_NF_MASK) + 1;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(2));
rate->nb = ((pllcon >> RK3066_PLLCON2_NB_SHIFT)
& RK3066_PLLCON2_NB_MASK) + 1;
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
static unsigned long rockchip_rk3066_pll_recalc_rate(struct clk_hw *hw,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
struct rockchip_pll_rate_table cur;
u64 rate64 = prate;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
u32 pllcon;
pllcon = readl_relaxed(pll->reg_base + RK3066_PLLCON(3));
if (pllcon & RK3066_PLLCON3_BYPASS) {
pr_debug("%s: pll %s is bypassed\n", __func__,
clk: rockchip: Convert to clk_hw based provider APIs We're removing struct clk from the clk provider API, so switch this code to using the clk_hw based provider APIs. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-30 18:20:57 -06:00
clk_hw_get_name(hw));
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
return prate;
}
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
rockchip_rk3066_pll_get_params(pll, &cur);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
rate64 *= cur.nf;
do_div(rate64, cur.nr);
do_div(rate64, cur.no);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
return (unsigned long)rate64;
}
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
static int rockchip_rk3066_pll_set_params(struct rockchip_clk_pll *pll,
const struct rockchip_pll_rate_table *rate)
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
{
clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-15 22:07:57 -06:00
const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
struct clk_mux *pll_mux = &pll->pll_mux;
struct rockchip_pll_rate_table cur;
clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-15 22:07:57 -06:00
int rate_change_remuxed = 0;
int cur_parent;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
int ret;
pr_debug("%s: rate settings for %lu (nr, no, nf): (%d, %d, %d)\n",
__func__, rate->rate, rate->nr, rate->no, rate->nf);
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
rockchip_rk3066_pll_get_params(pll, &cur);
cur.rate = 0;
clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-15 22:07:57 -06:00
cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
if (cur_parent == PLL_MODE_NORM) {
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
rate_change_remuxed = 1;
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
/* enter reset mode */
writel(HIWORD_UPDATE(RK3066_PLLCON3_RESET, RK3066_PLLCON3_RESET, 0),
pll->reg_base + RK3066_PLLCON(3));
/* update pll values */
writel(HIWORD_UPDATE(rate->nr - 1, RK3066_PLLCON0_NR_MASK,
RK3066_PLLCON0_NR_SHIFT) |
HIWORD_UPDATE(rate->no - 1, RK3066_PLLCON0_OD_MASK,
RK3066_PLLCON0_OD_SHIFT),
pll->reg_base + RK3066_PLLCON(0));
writel_relaxed(HIWORD_UPDATE(rate->nf - 1, RK3066_PLLCON1_NF_MASK,
RK3066_PLLCON1_NF_SHIFT),
pll->reg_base + RK3066_PLLCON(1));
clk: rockchip: Fix PLL bandwidth In the TRM we see that BWADJ is "a 12-bit bus that selects the values 1-4096 for the bandwidth divider (NB)": NB = BWADJ[11:0] + 1 The recommended setting of NB: NB = NF / 2. So: NB = NF / 2 BWADJ[11:0] + 1 = NF / 2 BWADJ[11:0] = NF / 2 - 1 Right now, we have: { \ .rate = _rate##U, \ .nr = _nr, \ .nf = _nf, \ .no = _no, \ .bwadj = (_nf >> 1), \ } That means we set bwadj to NF / 2, not NF / 2 - 1 All of this is a bit confusing because we specify "NR" (the 1-based value), "NF" (the 1-based value), "NO" (the 1-based value), but "BWADJ" (the 0-based value) instead of "NB" (the 1-based value). Let's change to working with "NB" and fix the off by one error. This may affect PLL jitter in a small way (hopefully for the better). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-21 14:41:23 -06:00
writel_relaxed(HIWORD_UPDATE(rate->nb - 1, RK3066_PLLCON2_NB_MASK,
RK3066_PLLCON2_NB_SHIFT),
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
pll->reg_base + RK3066_PLLCON(2));
/* leave reset and wait the reset_delay */
writel(HIWORD_UPDATE(0, RK3066_PLLCON3_RESET, 0),
pll->reg_base + RK3066_PLLCON(3));
udelay(RK3066_PLL_RESET_DELAY(rate->nr));
/* wait for the pll to lock */
ret = rockchip_pll_wait_lock(pll);
if (ret) {
clk: rockchip: fix of spelling mistake on unsuccessful in pll clock type fix spelling mistake, unsucessful -> unsuccessful Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-04-24 16:44:13 -06:00
pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
__func__);
rockchip_rk3066_pll_set_params(pll, &cur);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
}
clk: rockchip: change pll rate without a clk-notifier The Rockchip PLL code switches into slow mode (AKA bypass more AKA 24MHz mode) before actually changing the PLL. This keeps anyone from using the PLL while it's changing. However, in all known Rockchip SoCs nobody should ever see the 24MHz when changing the PLL supplying the armclk because we should reparent children to an alternate (faster than 24MHz) PLL. One problem is that the code to switch to an alternate parent was running in PRE_RATE_CHANGE. ...and the code to switch to slow mode was _also_ running in PRE_RATE_CHANGE. That meant there was no real guarantee that we would switch to an alternate parent before switching to 24MHz mode. Let's move the switch to "slow mode" straight into rockchip_rk3066_pll_set_rate(). That means we're guaranteed that the 24MHz is really a last-resort. Note that without this change on real systems we were the code to switch to an alternate parent at 24MHz. In some older versions of that code we'd appy a (temporary) / 5 to the 24MHz causing us to run at 4.8MHz. That wasn't enough to service USB interrupts in some cases and could lead to a system hang. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-09-15 22:07:57 -06:00
if (rate_change_remuxed)
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
return ret;
}
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
clk: rockchip: drop old_rate calculation on pll rate changes Previously when everything happened in the set_rate callbacks itself we needed the old_rate value for the possible rate rollback, so that made it easy to also use it in the debug output. Now with the param-handling being done in separate functions, reading and recalculating the current pll rate only to use it in a debug message that won't get displayed in regular cases anyway is quite a waste. Therefore drop that value from the debug output. In the worst case that previous rate will have been displayed on the rate change before. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-15 10:34:56 -06:00
pr_debug("%s: changing %s to %lu with a parent rate of %lu\n",
__func__, clk_hw_get_name(hw), drate, prate);
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
/* Get required rate settings from table */
rate = rockchip_get_pll_settings(pll, drate);
if (!rate) {
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
drate, clk_hw_get_name(hw));
return -EINVAL;
}
return rockchip_rk3066_pll_set_params(pll, rate);
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
static int rockchip_rk3066_pll_enable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(0, RK3066_PLLCON3_PWRDOWN, 0),
pll->reg_base + RK3066_PLLCON(3));
clk: rockchip: add pll_wait_lock for pll_enable If pll is power down,when power up pll need wait pll lock. The reference documents section: PLL frequency change and lock check Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-02-21 19:59:55 -07:00
rockchip_pll_wait_lock(pll);
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
return 0;
}
static void rockchip_rk3066_pll_disable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(RK3066_PLLCON3_PWRDOWN,
RK3066_PLLCON3_PWRDOWN, 0),
pll->reg_base + RK3066_PLLCON(3));
}
static int rockchip_rk3066_pll_is_enabled(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
u32 pllcon = readl(pll->reg_base + RK3066_PLLCON(3));
return !(pllcon & RK3066_PLLCON3_PWRDOWN);
}
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:52 -07:00
static void rockchip_rk3066_pll_init(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
struct rockchip_pll_rate_table cur;
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:52 -07:00
unsigned long drate;
if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE))
return;
clk: rockchip: Convert to clk_hw based provider APIs We're removing struct clk from the clk provider API, so switch this code to using the clk_hw based provider APIs. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-30 18:20:57 -06:00
drate = clk_hw_get_rate(hw);
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:52 -07:00
rate = rockchip_get_pll_settings(pll, drate);
/* when no rate setting for the current rate, rely on clk_set_rate */
if (!rate)
return;
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
rockchip_rk3066_pll_get_params(pll, &cur);
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:52 -07:00
clk: rockchip: Fix PLL bandwidth In the TRM we see that BWADJ is "a 12-bit bus that selects the values 1-4096 for the bandwidth divider (NB)": NB = BWADJ[11:0] + 1 The recommended setting of NB: NB = NF / 2. So: NB = NF / 2 BWADJ[11:0] + 1 = NF / 2 BWADJ[11:0] = NF / 2 - 1 Right now, we have: { \ .rate = _rate##U, \ .nr = _nr, \ .nf = _nf, \ .no = _no, \ .bwadj = (_nf >> 1), \ } That means we set bwadj to NF / 2, not NF / 2 - 1 All of this is a bit confusing because we specify "NR" (the 1-based value), "NF" (the 1-based value), "NO" (the 1-based value), but "BWADJ" (the 0-based value) instead of "NB" (the 1-based value). Let's change to working with "NB" and fix the off by one error. This may affect PLL jitter in a small way (hopefully for the better). Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-21 14:41:23 -06:00
pr_debug("%s: pll %s@%lu: nr (%d:%d); no (%d:%d); nf(%d:%d), nb(%d:%d)\n",
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
__func__, clk_hw_get_name(hw), drate, rate->nr, cur.nr,
rate->no, cur.no, rate->nf, cur.nf, rate->nb, cur.nb);
if (rate->nr != cur.nr || rate->no != cur.no || rate->nf != cur.nf
|| rate->nb != cur.nb) {
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:52 -07:00
pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n",
clk: rockchip: Convert to clk_hw based provider APIs We're removing struct clk from the clk provider API, so switch this code to using the clk_hw based provider APIs. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-30 18:20:57 -06:00
__func__, clk_hw_get_name(hw));
clk: rockchip: don't use clk_ APIs in the pll init-callback Separate the update of pll registers from the actual set_rate function so that the init callback does not need to access clk-API functions. As we now have separated the getting and setting of the pll parameters we can also directly use these new functions in other places too. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-10-01 03:38:35 -06:00
rockchip_rk3066_pll_set_params(pll, rate);
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:52 -07:00
}
}
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
static const struct clk_ops rockchip_rk3066_pll_clk_norate_ops = {
.recalc_rate = rockchip_rk3066_pll_recalc_rate,
.enable = rockchip_rk3066_pll_enable,
.disable = rockchip_rk3066_pll_disable,
.is_enabled = rockchip_rk3066_pll_is_enabled,
};
static const struct clk_ops rockchip_rk3066_pll_clk_ops = {
.recalc_rate = rockchip_rk3066_pll_recalc_rate,
.round_rate = rockchip_pll_round_rate,
.set_rate = rockchip_rk3066_pll_set_rate,
.enable = rockchip_rk3066_pll_enable,
.disable = rockchip_rk3066_pll_disable,
.is_enabled = rockchip_rk3066_pll_is_enabled,
clk: rockchip: add optional sync to pll rate parameters In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:52 -07:00
.init = rockchip_rk3066_pll_init,
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
};
clk: rockchip: add new pll-type for rk3399 and similar socs The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 20:47:01 -07:00
/**
* PLL used in RK3399
*/
#define RK3399_PLLCON(i) (i * 0x4)
#define RK3399_PLLCON0_FBDIV_MASK 0xfff
#define RK3399_PLLCON0_FBDIV_SHIFT 0
#define RK3399_PLLCON1_REFDIV_MASK 0x3f
#define RK3399_PLLCON1_REFDIV_SHIFT 0
#define RK3399_PLLCON1_POSTDIV1_MASK 0x7
#define RK3399_PLLCON1_POSTDIV1_SHIFT 8
#define RK3399_PLLCON1_POSTDIV2_MASK 0x7
#define RK3399_PLLCON1_POSTDIV2_SHIFT 12
#define RK3399_PLLCON2_FRAC_MASK 0xffffff
#define RK3399_PLLCON2_FRAC_SHIFT 0
#define RK3399_PLLCON2_LOCK_STATUS BIT(31)
#define RK3399_PLLCON3_PWRDOWN BIT(0)
#define RK3399_PLLCON3_DSMPD_MASK 0x1
#define RK3399_PLLCON3_DSMPD_SHIFT 3
static int rockchip_rk3399_pll_wait_lock(struct rockchip_clk_pll *pll)
{
u32 pllcon;
int delay = 24000000;
/* poll check the lock status in rk3399 xPLLCON2 */
while (delay > 0) {
pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(2));
if (pllcon & RK3399_PLLCON2_LOCK_STATUS)
return 0;
delay--;
}
pr_err("%s: timeout waiting for pll to lock\n", __func__);
return -ETIMEDOUT;
}
static void rockchip_rk3399_pll_get_params(struct rockchip_clk_pll *pll,
struct rockchip_pll_rate_table *rate)
{
u32 pllcon;
pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(0));
rate->fbdiv = ((pllcon >> RK3399_PLLCON0_FBDIV_SHIFT)
& RK3399_PLLCON0_FBDIV_MASK);
pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(1));
rate->refdiv = ((pllcon >> RK3399_PLLCON1_REFDIV_SHIFT)
& RK3399_PLLCON1_REFDIV_MASK);
rate->postdiv1 = ((pllcon >> RK3399_PLLCON1_POSTDIV1_SHIFT)
& RK3399_PLLCON1_POSTDIV1_MASK);
rate->postdiv2 = ((pllcon >> RK3399_PLLCON1_POSTDIV2_SHIFT)
& RK3399_PLLCON1_POSTDIV2_MASK);
pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(2));
rate->frac = ((pllcon >> RK3399_PLLCON2_FRAC_SHIFT)
& RK3399_PLLCON2_FRAC_MASK);
pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(3));
rate->dsmpd = ((pllcon >> RK3399_PLLCON3_DSMPD_SHIFT)
& RK3399_PLLCON3_DSMPD_MASK);
}
static unsigned long rockchip_rk3399_pll_recalc_rate(struct clk_hw *hw,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
struct rockchip_pll_rate_table cur;
u64 rate64 = prate;
rockchip_rk3399_pll_get_params(pll, &cur);
rate64 *= cur.fbdiv;
do_div(rate64, cur.refdiv);
if (cur.dsmpd == 0) {
/* fractional mode */
u64 frac_rate64 = prate * cur.frac;
do_div(frac_rate64, cur.refdiv);
rate64 += frac_rate64 >> 24;
}
do_div(rate64, cur.postdiv1);
do_div(rate64, cur.postdiv2);
return (unsigned long)rate64;
}
static int rockchip_rk3399_pll_set_params(struct rockchip_clk_pll *pll,
const struct rockchip_pll_rate_table *rate)
{
const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
struct clk_mux *pll_mux = &pll->pll_mux;
struct rockchip_pll_rate_table cur;
u32 pllcon;
int rate_change_remuxed = 0;
int cur_parent;
int ret;
pr_debug("%s: rate settings for %lu fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
__func__, rate->rate, rate->fbdiv, rate->postdiv1, rate->refdiv,
rate->postdiv2, rate->dsmpd, rate->frac);
rockchip_rk3399_pll_get_params(pll, &cur);
cur.rate = 0;
cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
if (cur_parent == PLL_MODE_NORM) {
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
rate_change_remuxed = 1;
}
/* update pll values */
writel_relaxed(HIWORD_UPDATE(rate->fbdiv, RK3399_PLLCON0_FBDIV_MASK,
RK3399_PLLCON0_FBDIV_SHIFT),
pll->reg_base + RK3399_PLLCON(0));
writel_relaxed(HIWORD_UPDATE(rate->refdiv, RK3399_PLLCON1_REFDIV_MASK,
RK3399_PLLCON1_REFDIV_SHIFT) |
HIWORD_UPDATE(rate->postdiv1, RK3399_PLLCON1_POSTDIV1_MASK,
RK3399_PLLCON1_POSTDIV1_SHIFT) |
HIWORD_UPDATE(rate->postdiv2, RK3399_PLLCON1_POSTDIV2_MASK,
RK3399_PLLCON1_POSTDIV2_SHIFT),
pll->reg_base + RK3399_PLLCON(1));
/* xPLL CON2 is not HIWORD_MASK */
pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(2));
pllcon &= ~(RK3399_PLLCON2_FRAC_MASK << RK3399_PLLCON2_FRAC_SHIFT);
pllcon |= rate->frac << RK3399_PLLCON2_FRAC_SHIFT;
writel_relaxed(pllcon, pll->reg_base + RK3399_PLLCON(2));
writel_relaxed(HIWORD_UPDATE(rate->dsmpd, RK3399_PLLCON3_DSMPD_MASK,
RK3399_PLLCON3_DSMPD_SHIFT),
pll->reg_base + RK3399_PLLCON(3));
/* wait for the pll to lock */
ret = rockchip_rk3399_pll_wait_lock(pll);
if (ret) {
pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
__func__);
rockchip_rk3399_pll_set_params(pll, &cur);
}
if (rate_change_remuxed)
pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
return ret;
}
static int rockchip_rk3399_pll_set_rate(struct clk_hw *hw, unsigned long drate,
unsigned long prate)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
clk: rockchip: drop old_rate calculation on pll rate changes Previously when everything happened in the set_rate callbacks itself we needed the old_rate value for the possible rate rollback, so that made it easy to also use it in the debug output. Now with the param-handling being done in separate functions, reading and recalculating the current pll rate only to use it in a debug message that won't get displayed in regular cases anyway is quite a waste. Therefore drop that value from the debug output. In the worst case that previous rate will have been displayed on the rate change before. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-15 10:34:56 -06:00
pr_debug("%s: changing %s to %lu with a parent rate of %lu\n",
__func__, __clk_get_name(hw->clk), drate, prate);
clk: rockchip: add new pll-type for rk3399 and similar socs The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 20:47:01 -07:00
/* Get required rate settings from table */
rate = rockchip_get_pll_settings(pll, drate);
if (!rate) {
pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
drate, __clk_get_name(hw->clk));
return -EINVAL;
}
return rockchip_rk3399_pll_set_params(pll, rate);
}
static int rockchip_rk3399_pll_enable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(0, RK3399_PLLCON3_PWRDOWN, 0),
pll->reg_base + RK3399_PLLCON(3));
clk: rockchip: add pll_wait_lock for pll_enable If pll is power down,when power up pll need wait pll lock. The reference documents section: PLL frequency change and lock check Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-02-21 19:59:55 -07:00
rockchip_rk3399_pll_wait_lock(pll);
clk: rockchip: add new pll-type for rk3399 and similar socs The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 20:47:01 -07:00
return 0;
}
static void rockchip_rk3399_pll_disable(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
writel(HIWORD_UPDATE(RK3399_PLLCON3_PWRDOWN,
RK3399_PLLCON3_PWRDOWN, 0),
pll->reg_base + RK3399_PLLCON(3));
}
static int rockchip_rk3399_pll_is_enabled(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
u32 pllcon = readl(pll->reg_base + RK3399_PLLCON(3));
return !(pllcon & RK3399_PLLCON3_PWRDOWN);
}
static void rockchip_rk3399_pll_init(struct clk_hw *hw)
{
struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
const struct rockchip_pll_rate_table *rate;
struct rockchip_pll_rate_table cur;
unsigned long drate;
if (!(pll->flags & ROCKCHIP_PLL_SYNC_RATE))
return;
drate = clk_hw_get_rate(hw);
rate = rockchip_get_pll_settings(pll, drate);
/* when no rate setting for the current rate, rely on clk_set_rate */
if (!rate)
return;
rockchip_rk3399_pll_get_params(pll, &cur);
pr_debug("%s: pll %s@%lu: Hz\n", __func__, __clk_get_name(hw->clk),
drate);
pr_debug("old - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
cur.fbdiv, cur.postdiv1, cur.refdiv, cur.postdiv2,
cur.dsmpd, cur.frac);
pr_debug("new - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd: %d, frac: %d\n",
rate->fbdiv, rate->postdiv1, rate->refdiv, rate->postdiv2,
rate->dsmpd, rate->frac);
if (rate->fbdiv != cur.fbdiv || rate->postdiv1 != cur.postdiv1 ||
rate->refdiv != cur.refdiv || rate->postdiv2 != cur.postdiv2 ||
clk: rockchip: Ignore frac divisor for PLL equivalence when it's unused Rockchip RK3399 PLLs can be used in two separate modes: integral and fractional. We can select between these two modes with the unambiguously named DSMPD bit. During boot, we check all PLL settings to confirm that they match our PLL table for that frequency, and reinitialize the PLLs where they don't. The settings checked for this include the fractional divider field that is only used in fractional mode, even if we're in integral mode (DSMPD = 1) and that field has no effect. This patch changes the check to only compare the fractional divider if we're actually in fractional mode. This way, we won't reinitialize the PLL in cases where there's absolutely no reason for that, which may avoid glitching child clocks that should better not be glitched (e.g. PWM regulators). Signed-off-by: Julius Werner <jwerner@chromium.org> [cloned the fix to the pretty similar rk3036 pll] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-11-02 17:43:24 -06:00
rate->dsmpd != cur.dsmpd ||
(!cur.dsmpd && (rate->frac != cur.frac))) {
clk: rockchip: add new pll-type for rk3399 and similar socs The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 20:47:01 -07:00
struct clk *parent = clk_get_parent(hw->clk);
if (!parent) {
pr_warn("%s: parent of %s not available\n",
__func__, __clk_get_name(hw->clk));
return;
}
pr_debug("%s: pll %s: rate params do not match rate table, adjusting\n",
__func__, __clk_get_name(hw->clk));
rockchip_rk3399_pll_set_params(pll, rate);
}
}
static const struct clk_ops rockchip_rk3399_pll_clk_norate_ops = {
.recalc_rate = rockchip_rk3399_pll_recalc_rate,
.enable = rockchip_rk3399_pll_enable,
.disable = rockchip_rk3399_pll_disable,
.is_enabled = rockchip_rk3399_pll_is_enabled,
};
static const struct clk_ops rockchip_rk3399_pll_clk_ops = {
.recalc_rate = rockchip_rk3399_pll_recalc_rate,
.round_rate = rockchip_pll_round_rate,
.set_rate = rockchip_rk3399_pll_set_rate,
.enable = rockchip_rk3399_pll_enable,
.disable = rockchip_rk3399_pll_disable,
.is_enabled = rockchip_rk3399_pll_is_enabled,
.init = rockchip_rk3399_pll_init,
};
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
/*
* Common registering of pll clocks
*/
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-08 19:37:04 -07:00
struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
enum rockchip_pll_type pll_type,
clk: make several parent names const Since commit 2893c379461a ("clk: make strings in parent name arrays const") the name of parent clocks can be const. So add more const in several clock drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-28 02:45:51 -06:00
const char *name, const char *const *parent_names,
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-08 19:37:04 -07:00
u8 num_parents, int con_offset, int grf_lock_offset,
int lock_shift, int mode_offset, int mode_shift,
struct rockchip_pll_rate_table *rate_table,
clk: rockchip: use general clock flag when registering pll Add the general flags the pll list already contains to the clock init, so that needed clock flags can be used for plls. Signed-off-by: Heiko Stübner <heiko@sntech.de>
2016-07-29 01:56:55 -06:00
unsigned long flags, u8 clk_pll_flags)
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
{
const char *pll_parents[3];
struct clk_init_data init;
struct rockchip_clk_pll *pll;
struct clk_mux *pll_mux;
struct clk *pll_clk, *mux_clk;
char pll_name[20];
clk: rockchip: add new pll-type for rk3328 The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-28 19:45:10 -07:00
if ((pll_type != pll_rk3328 && num_parents != 2) ||
(pll_type == pll_rk3328 && num_parents != 1)) {
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
pr_err("%s: needs two parent clocks\n", __func__);
return ERR_PTR(-EINVAL);
}
/* name the actual pll */
snprintf(pll_name, sizeof(pll_name), "pll_%s", name);
pll = kzalloc(sizeof(*pll), GFP_KERNEL);
if (!pll)
return ERR_PTR(-ENOMEM);
clk: rockchip: register pll mux before pll itself The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll does have an init callback to make sure the boot-selected frequency is using the expected pll settings and resets the same frequency using the values provided in the driver if necessary. The setting itself also involves remuxing the pll-mux temporarily to the xin24m source to let the new pll rate settle. Until now this worked flawlessly, even when it had the flaw of accessing the mux settings before the mux actually got registered. With the recent clock-core conversions this flaw became apparent in null pointer dereference in [<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8) [<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320) So to fix that, simply register the pll-mux before the pll, so that it will be fully initialized when the pll clock executes its init- callback and possibly touches the pll-mux clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-19 07:06:55 -06:00
/* create the mux on top of the real pll */
pll->pll_mux_ops = &clk_mux_ops;
pll_mux = &pll->pll_mux;
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-08 19:37:04 -07:00
pll_mux->reg = ctx->reg_base + mode_offset;
clk: rockchip: register pll mux before pll itself The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll does have an init callback to make sure the boot-selected frequency is using the expected pll settings and resets the same frequency using the values provided in the driver if necessary. The setting itself also involves remuxing the pll-mux temporarily to the xin24m source to let the new pll rate settle. Until now this worked flawlessly, even when it had the flaw of accessing the mux settings before the mux actually got registered. With the recent clock-core conversions this flaw became apparent in null pointer dereference in [<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8) [<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320) So to fix that, simply register the pll-mux before the pll, so that it will be fully initialized when the pll clock executes its init- callback and possibly touches the pll-mux clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-19 07:06:55 -06:00
pll_mux->shift = mode_shift;
clk: rockchip: add new pll-type for rk3328 The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-28 19:45:10 -07:00
if (pll_type == pll_rk3328)
pll_mux->mask = PLL_RK3328_MODE_MASK;
else
pll_mux->mask = PLL_MODE_MASK;
clk: rockchip: register pll mux before pll itself The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll does have an init callback to make sure the boot-selected frequency is using the expected pll settings and resets the same frequency using the values provided in the driver if necessary. The setting itself also involves remuxing the pll-mux temporarily to the xin24m source to let the new pll rate settle. Until now this worked flawlessly, even when it had the flaw of accessing the mux settings before the mux actually got registered. With the recent clock-core conversions this flaw became apparent in null pointer dereference in [<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8) [<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320) So to fix that, simply register the pll-mux before the pll, so that it will be fully initialized when the pll clock executes its init- callback and possibly touches the pll-mux clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-19 07:06:55 -06:00
pll_mux->flags = 0;
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-08 19:37:04 -07:00
pll_mux->lock = &ctx->lock;
clk: rockchip: register pll mux before pll itself The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll does have an init callback to make sure the boot-selected frequency is using the expected pll settings and resets the same frequency using the values provided in the driver if necessary. The setting itself also involves remuxing the pll-mux temporarily to the xin24m source to let the new pll rate settle. Until now this worked flawlessly, even when it had the flaw of accessing the mux settings before the mux actually got registered. With the recent clock-core conversions this flaw became apparent in null pointer dereference in [<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8) [<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320) So to fix that, simply register the pll-mux before the pll, so that it will be fully initialized when the pll clock executes its init- callback and possibly touches the pll-mux clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-19 07:06:55 -06:00
pll_mux->hw.init = &init;
clk: rockchip: add new pll-type for rk3399 and similar socs The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 20:47:01 -07:00
if (pll_type == pll_rk3036 ||
pll_type == pll_rk3066 ||
clk: rockchip: add new pll-type for rk3328 The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-28 19:45:10 -07:00
pll_type == pll_rk3328 ||
clk: rockchip: add new pll-type for rk3399 and similar socs The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 20:47:01 -07:00
pll_type == pll_rk3399)
clk: rockchip: register pll mux before pll itself The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll does have an init callback to make sure the boot-selected frequency is using the expected pll settings and resets the same frequency using the values provided in the driver if necessary. The setting itself also involves remuxing the pll-mux temporarily to the xin24m source to let the new pll rate settle. Until now this worked flawlessly, even when it had the flaw of accessing the mux settings before the mux actually got registered. With the recent clock-core conversions this flaw became apparent in null pointer dereference in [<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8) [<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320) So to fix that, simply register the pll-mux before the pll, so that it will be fully initialized when the pll clock executes its init- callback and possibly touches the pll-mux clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-19 07:06:55 -06:00
pll_mux->flags |= CLK_MUX_HIWORD_MASK;
/* the actual muxing is xin24m, pll-output, xin32k */
pll_parents[0] = parent_names[0];
pll_parents[1] = pll_name;
pll_parents[2] = parent_names[1];
init.name = name;
init.flags = CLK_SET_RATE_PARENT;
init.ops = pll->pll_mux_ops;
init.parent_names = pll_parents;
clk: rockchip: add new pll-type for rk3328 The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-28 19:45:10 -07:00
if (pll_type == pll_rk3328)
init.num_parents = 2;
else
init.num_parents = ARRAY_SIZE(pll_parents);
clk: rockchip: register pll mux before pll itself The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll does have an init callback to make sure the boot-selected frequency is using the expected pll settings and resets the same frequency using the values provided in the driver if necessary. The setting itself also involves remuxing the pll-mux temporarily to the xin24m source to let the new pll rate settle. Until now this worked flawlessly, even when it had the flaw of accessing the mux settings before the mux actually got registered. With the recent clock-core conversions this flaw became apparent in null pointer dereference in [<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8) [<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320) So to fix that, simply register the pll-mux before the pll, so that it will be fully initialized when the pll clock executes its init- callback and possibly touches the pll-mux clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-19 07:06:55 -06:00
mux_clk = clk_register(NULL, &pll_mux->hw);
if (IS_ERR(mux_clk))
goto err_mux;
/* now create the actual pll */
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
init.name = pll_name;
/* keep all plls untouched for now */
clk: rockchip: use general clock flag when registering pll Add the general flags the pll list already contains to the clock init, so that needed clock flags can be used for plls. Signed-off-by: Heiko Stübner <heiko@sntech.de>
2016-07-29 01:56:55 -06:00
init.flags = flags | CLK_IGNORE_UNUSED;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
init.parent_names = &parent_names[0];
init.num_parents = 1;
if (rate_table) {
int len;
/* find count of rates in rate_table */
for (len = 0; rate_table[len].rate != 0; )
len++;
pll->rate_count = len;
pll->rate_table = kmemdup(rate_table,
pll->rate_count *
sizeof(struct rockchip_pll_rate_table),
GFP_KERNEL);
WARN(!pll->rate_table,
"%s: could not allocate rate table for %s\n",
__func__, name);
}
switch (pll_type) {
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
case pll_rk3036:
clk: rockchip: add new pll-type for rk3328 The rk3328's pll and clock are similar with rk3036's, it different with pll_mode_mask, the rk3328 soc pll mode only one bit(rk3036 soc have two bits) so these should be independent and separate from the series of rk3328s. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-28 19:45:10 -07:00
case pll_rk3328:
clk: rockchip: simplify GRF handling in pll clocks With the previous commit, the clock drivers now know at init time if the GRF regmap is available. That means if it isn't available then, it also won't become available later and we can therefore switch PLLs, that need the GRF for the lock-status, to read-only mode - similar behaviour as the aborting of rate changes we did before. This saves some conditionals on every rate change and we can also drop the rockchip_clk_get_grf function completely. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-15 09:55:41 -06:00
if (!pll->rate_table || IS_ERR(ctx->grf))
clk: rockchip: add new pll-type for rk3036 and similar socs The rk3036's pll and clock are different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2015-11-05 00:33:57 -07:00
init.ops = &rockchip_rk3036_pll_clk_norate_ops;
else
init.ops = &rockchip_rk3036_pll_clk_ops;
break;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
case pll_rk3066:
clk: rockchip: simplify GRF handling in pll clocks With the previous commit, the clock drivers now know at init time if the GRF regmap is available. That means if it isn't available then, it also won't become available later and we can therefore switch PLLs, that need the GRF for the lock-status, to read-only mode - similar behaviour as the aborting of rate changes we did before. This saves some conditionals on every rate change and we can also drop the rockchip_clk_get_grf function completely. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-15 09:55:41 -06:00
if (!pll->rate_table || IS_ERR(ctx->grf))
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
init.ops = &rockchip_rk3066_pll_clk_norate_ops;
else
init.ops = &rockchip_rk3066_pll_clk_ops;
break;
clk: rockchip: add new pll-type for rk3399 and similar socs The rk3399's pll and clock are similar with rk3036's, it different with base on the rk3066(rk3188, rk3288, rk3368 use it), there are different adjust foctors and control registers, so these should be independent and separate from the series of rk3066s. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-09 20:47:01 -07:00
case pll_rk3399:
if (!pll->rate_table)
init.ops = &rockchip_rk3399_pll_clk_norate_ops;
else
init.ops = &rockchip_rk3399_pll_clk_ops;
break;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
default:
pr_warn("%s: Unknown pll type for pll clk %s\n",
__func__, name);
}
pll->hw.init = &init;
pll->type = pll_type;
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-08 19:37:04 -07:00
pll->reg_base = ctx->reg_base + con_offset;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
pll->lock_offset = grf_lock_offset;
pll->lock_shift = lock_shift;
clk: rockchip: add ability to specify pll-specific flags This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-20 12:38:50 -07:00
pll->flags = clk_pll_flags;
clk: rockchip: Add support for multiple clock providers There are need to support Multi-CRUs probability in future, but it is not supported on the current Rockchip Clock Framework. Therefore, this patch add support a provider as the parameter handler when we call the clock register functions for per CRU. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-03-08 19:37:04 -07:00
pll->lock = &ctx->lock;
pll->ctx = ctx;
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
pll_clk = clk_register(NULL, &pll->hw);
if (IS_ERR(pll_clk)) {
pr_err("%s: failed to register pll clock %s : %ld\n",
__func__, name, PTR_ERR(pll_clk));
goto err_pll;
}
return mux_clk;
err_pll:
clk: rockchip: register pll mux before pll itself The structure is xin24m -> pll -> pll-mux (xin24m,pll,xin32k). The pll does have an init callback to make sure the boot-selected frequency is using the expected pll settings and resets the same frequency using the values provided in the driver if necessary. The setting itself also involves remuxing the pll-mux temporarily to the xin24m source to let the new pll rate settle. Until now this worked flawlessly, even when it had the flaw of accessing the mux settings before the mux actually got registered. With the recent clock-core conversions this flaw became apparent in null pointer dereference in [<c03fc400>] (clk_hw_get_num_parents) from [<c0400df0>] (clk_mux_get_parent+0x14/0xc8) [<c0400ddc>] (clk_mux_get_parent) from [<c040246c>] (rockchip_rk3066_pll_set_rate+0xd8/0x320) So to fix that, simply register the pll-mux before the pll, so that it will be fully initialized when the pll clock executes its init- callback and possibly touches the pll-mux clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-19 07:06:55 -06:00
clk_unregister(mux_clk);
mux_clk = pll_clk;
err_mux:
clk: rockchip: add clock type for pll clocks and pll used on rk3066 All known Rockchip SoCs down to the RK28xx (ARM9) use a similar pattern to handle their plls: |--\ xin32k ----------------|mux\ xin24m -----| pll |----|pll|--- pll output \---------------|src/ |--/ The pll output is sourced from 1 of 3 sources, the actual pll being one of them. To change the pll frequency it is imperative to remux it to another source beforehand. This is done by adding a clock-listener to the pll that handles the remuxing before and after the rate change. The output mux is implemented as a separate clock to make use of already existing common-clock features for disabling the pll if one of the other two sources is used. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-By: Max Schwarz <max.schwarz@online.de> Tested-By: Max Schwarz <max.schwarz@online.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 17:59:10 -06:00
kfree(pll);
return mux_clk;
}