1
0
Fork 0
alistair23-linux/drivers/scsi/megaraid/megaraid_sas_fusion.h

1381 lines
41 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 07:51:43 -06:00
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Linux MegaRAID driver for SAS based RAID controllers
*
* Copyright (c) 2009-2013 LSI Corporation
* Copyright (c) 2013-2016 Avago Technologies
* Copyright (c) 2016-2018 Broadcom Inc.
*
* FILE: megaraid_sas_fusion.h
*
* Authors: Broadcom Inc.
* Manoj Jose
* Sumant Patro
* Kashyap Desai <kashyap.desai@broadcom.com>
* Sumit Saxena <sumit.saxena@broadcom.com>
*
* Send feedback to: megaraidlinux.pdl@broadcom.com
*/
#ifndef _MEGARAID_SAS_FUSION_H_
#define _MEGARAID_SAS_FUSION_H_
/* Fusion defines */
#define MEGASAS_CHAIN_FRAME_SZ_MIN 1024
#define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000009)
#define MEGASAS_MAX_CHAIN_SHIFT 5
#define MEGASAS_MAX_CHAIN_SIZE_UNITS_MASK 0x400000
#define MEGASAS_MAX_CHAIN_SIZE_MASK 0x3E0
#define MEGASAS_256K_IO 128
#define MEGASAS_1MB_IO (MEGASAS_256K_IO * 4)
#define MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE 256
#define MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST 0xF0
#define MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST 0xF1
#define MEGASAS_LOAD_BALANCE_FLAG 0x1
#define MEGASAS_DCMD_MBOX_PEND_FLAG 0x1
#define HOST_DIAG_WRITE_ENABLE 0x80
#define HOST_DIAG_RESET_ADAPTER 0x4
#define MEGASAS_FUSION_MAX_RESET_TRIES 3
#define MAX_MSIX_QUEUES_FUSION 128
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 03:49:05 -06:00
#define RDPQ_MAX_INDEX_IN_ONE_CHUNK 16
#define RDPQ_MAX_CHUNK_COUNT (MAX_MSIX_QUEUES_FUSION / RDPQ_MAX_INDEX_IN_ONE_CHUNK)
/* Invader defines */
#define MPI2_TYPE_CUDA 0x2
#define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH 0x4000
#define MR_RL_FLAGS_GRANT_DESTINATION_CPU0 0x00
#define MR_RL_FLAGS_GRANT_DESTINATION_CPU1 0x10
#define MR_RL_FLAGS_GRANT_DESTINATION_CUDA 0x80
#define MR_RL_FLAGS_SEQ_NUM_ENABLE 0x8
#define MR_RL_WRITE_THROUGH_MODE 0x00
#define MR_RL_WRITE_BACK_MODE 0x01
/* T10 PI defines */
#define MR_PROT_INFO_TYPE_CONTROLLER 0x8
#define MEGASAS_SCSI_VARIABLE_LENGTH_CMD 0x7f
#define MEGASAS_SCSI_SERVICE_ACTION_READ32 0x9
#define MEGASAS_SCSI_SERVICE_ACTION_WRITE32 0xB
#define MEGASAS_SCSI_ADDL_CDB_LEN 0x18
#define MEGASAS_RD_WR_PROTECT_CHECK_ALL 0x20
#define MEGASAS_RD_WR_PROTECT_CHECK_NONE 0x60
#define MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET (0x0000030C)
#define MPI2_REPLY_POST_HOST_INDEX_OFFSET (0x0000006C)
/*
* Raid context flags
*/
#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT 0x4
#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_MASK 0x30
enum MR_RAID_FLAGS_IO_SUB_TYPE {
MR_RAID_FLAGS_IO_SUB_TYPE_NONE = 0,
MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD = 1,
MR_RAID_FLAGS_IO_SUB_TYPE_RMW_DATA = 2,
MR_RAID_FLAGS_IO_SUB_TYPE_RMW_P = 3,
MR_RAID_FLAGS_IO_SUB_TYPE_RMW_Q = 4,
MR_RAID_FLAGS_IO_SUB_TYPE_CACHE_BYPASS = 6,
MR_RAID_FLAGS_IO_SUB_TYPE_LDIO_BW_LIMIT = 7,
MR_RAID_FLAGS_IO_SUB_TYPE_R56_DIV_OFFLOAD = 8
};
/*
* Request descriptor types
*/
#define MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO 0x7
#define MEGASAS_REQ_DESCRIPT_FLAGS_MFA 0x1
#define MEGASAS_REQ_DESCRIPT_FLAGS_NO_LOCK 0x2
#define MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT 1
#define MEGASAS_FP_CMD_LEN 16
#define MEGASAS_FUSION_IN_RESET 0
#define MEGASAS_FUSION_OCR_NOT_POSSIBLE 1
#define RAID_1_PEER_CMDS 2
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 05:53:11 -06:00
#define JBOD_MAPS_COUNT 2
#define MEGASAS_REDUCE_QD_COUNT 64
#define IOC_INIT_FRAME_SIZE 4096
/*
* Raid Context structure which describes MegaRAID specific IO Parameters
* This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
*/
struct RAID_CONTEXT {
#if defined(__BIG_ENDIAN_BITFIELD)
u8 nseg:4;
u8 type:4;
#else
u8 type:4;
u8 nseg:4;
#endif
u8 resvd0;
__le16 timeout_value;
u8 reg_lock_flags;
u8 resvd1;
__le16 virtual_disk_tgt_id;
__le64 reg_lock_row_lba;
__le32 reg_lock_length;
__le16 next_lmid;
u8 ex_status;
u8 status;
u8 raid_flags;
u8 num_sge;
__le16 config_seq_num;
u8 span_arm;
u8 priority;
u8 num_sge_ext;
u8 resvd2;
};
/*
* Raid Context structure which describes ventura MegaRAID specific
* IO Paramenters ,This resides at offset 0x60 where the SGL normally
* starts in MPT IO Frames
*/
struct RAID_CONTEXT_G35 {
#define RAID_CONTEXT_NSEG_MASK 0x00F0
#define RAID_CONTEXT_NSEG_SHIFT 4
#define RAID_CONTEXT_TYPE_MASK 0x000F
#define RAID_CONTEXT_TYPE_SHIFT 0
u16 nseg_type;
u16 timeout_value; /* 0x02 -0x03 */
u16 routing_flags; // 0x04 -0x05 routing flags
u16 virtual_disk_tgt_id; /* 0x06 -0x07 */
__le64 reg_lock_row_lba; /* 0x08 - 0x0F */
u32 reg_lock_length; /* 0x10 - 0x13 */
union { // flow specific
u16 rmw_op_index; /* 0x14 - 0x15, R5/6 RMW: rmw operation index*/
u16 peer_smid; /* 0x14 - 0x15, R1 Write: peer smid*/
u16 r56_arm_map; /* 0x14 - 0x15, Unused [15], LogArm[14:10], P-Arm[9:5], Q-Arm[4:0] */
} flow_specific;
u8 ex_status; /* 0x16 : OUT */
u8 status; /* 0x17 status */
u8 raid_flags; /* 0x18 resvd[7:6], ioSubType[5:4],
* resvd[3:1], preferredCpu[0]
*/
u8 span_arm; /* 0x1C span[7:5], arm[4:0] */
u16 config_seq_num; /* 0x1A -0x1B */
union {
/*
* Bit format:
* ---------------------------------
* | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
* ---------------------------------
* Byte0 | numSGE[7]- numSGE[0] |
* ---------------------------------
* Byte1 |SD | resvd | numSGE 8-11 |
* --------------------------------
*/
#define NUM_SGE_MASK_LOWER 0xFF
#define NUM_SGE_MASK_UPPER 0x0F
#define NUM_SGE_SHIFT_UPPER 8
#define STREAM_DETECT_SHIFT 7
#define STREAM_DETECT_MASK 0x80
struct {
#if defined(__BIG_ENDIAN_BITFIELD) /* 0x1C - 0x1D */
u16 stream_detected:1;
u16 reserved:3;
u16 num_sge:12;
#else
u16 num_sge:12;
u16 reserved:3;
u16 stream_detected:1;
#endif
} bits;
u8 bytes[2];
} u;
u8 resvd2[2]; /* 0x1E-0x1F */
};
#define MR_RAID_CTX_ROUTINGFLAGS_SLD_SHIFT 1
#define MR_RAID_CTX_ROUTINGFLAGS_C2D_SHIFT 2
#define MR_RAID_CTX_ROUTINGFLAGS_FWD_SHIFT 3
#define MR_RAID_CTX_ROUTINGFLAGS_SQN_SHIFT 4
#define MR_RAID_CTX_ROUTINGFLAGS_SBS_SHIFT 5
#define MR_RAID_CTX_ROUTINGFLAGS_RW_SHIFT 6
#define MR_RAID_CTX_ROUTINGFLAGS_LOG_SHIFT 7
#define MR_RAID_CTX_ROUTINGFLAGS_CPUSEL_SHIFT 8
#define MR_RAID_CTX_ROUTINGFLAGS_CPUSEL_MASK 0x0F00
#define MR_RAID_CTX_ROUTINGFLAGS_SETDIVERT_SHIFT 12
#define MR_RAID_CTX_ROUTINGFLAGS_SETDIVERT_MASK 0xF000
static inline void set_num_sge(struct RAID_CONTEXT_G35 *rctx_g35,
u16 sge_count)
{
rctx_g35->u.bytes[0] = (u8)(sge_count & NUM_SGE_MASK_LOWER);
rctx_g35->u.bytes[1] |= (u8)((sge_count >> NUM_SGE_SHIFT_UPPER)
& NUM_SGE_MASK_UPPER);
}
static inline u16 get_num_sge(struct RAID_CONTEXT_G35 *rctx_g35)
{
u16 sge_count;
sge_count = (u16)(((rctx_g35->u.bytes[1] & NUM_SGE_MASK_UPPER)
<< NUM_SGE_SHIFT_UPPER) | (rctx_g35->u.bytes[0]));
return sge_count;
}
#define SET_STREAM_DETECTED(rctx_g35) \
(rctx_g35.u.bytes[1] |= STREAM_DETECT_MASK)
#define CLEAR_STREAM_DETECTED(rctx_g35) \
(rctx_g35.u.bytes[1] &= ~(STREAM_DETECT_MASK))
static inline bool is_stream_detected(struct RAID_CONTEXT_G35 *rctx_g35)
{
return ((rctx_g35->u.bytes[1] & STREAM_DETECT_MASK));
}
union RAID_CONTEXT_UNION {
struct RAID_CONTEXT raid_context;
struct RAID_CONTEXT_G35 raid_context_g35;
};
#define RAID_CTX_SPANARM_ARM_SHIFT (0)
#define RAID_CTX_SPANARM_ARM_MASK (0x1f)
#define RAID_CTX_SPANARM_SPAN_SHIFT (5)
#define RAID_CTX_SPANARM_SPAN_MASK (0xE0)
/* LogArm[14:10], P-Arm[9:5], Q-Arm[4:0] */
#define RAID_CTX_R56_Q_ARM_MASK (0x1F)
#define RAID_CTX_R56_P_ARM_SHIFT (5)
#define RAID_CTX_R56_P_ARM_MASK (0x3E0)
#define RAID_CTX_R56_LOG_ARM_SHIFT (10)
#define RAID_CTX_R56_LOG_ARM_MASK (0x7C00)
/* number of bits per index in U32 TrackStream */
#define BITS_PER_INDEX_STREAM 4
#define INVALID_STREAM_NUM 16
#define MR_STREAM_BITMAP 0x76543210
#define STREAM_MASK ((1 << BITS_PER_INDEX_STREAM) - 1)
#define ZERO_LAST_STREAM 0x0fffffff
#define MAX_STREAMS_TRACKED 8
/*
* define region lock types
*/
enum REGION_TYPE {
REGION_TYPE_UNUSED = 0,
REGION_TYPE_SHARED_READ = 1,
REGION_TYPE_SHARED_WRITE = 2,
REGION_TYPE_EXCLUSIVE = 3,
};
/* MPI2 defines */
#define MPI2_FUNCTION_IOC_INIT (0x02) /* IOC Init */
#define MPI2_WHOINIT_HOST_DRIVER (0x04)
#define MPI2_VERSION_MAJOR (0x02)
#define MPI2_VERSION_MINOR (0x00)
#define MPI2_VERSION_MAJOR_MASK (0xFF00)
#define MPI2_VERSION_MAJOR_SHIFT (8)
#define MPI2_VERSION_MINOR_MASK (0x00FF)
#define MPI2_VERSION_MINOR_SHIFT (0)
#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
MPI2_VERSION_MINOR)
#define MPI2_HEADER_VERSION_UNIT (0x10)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
#define MPI2_HEADER_VERSION_DEV_MASK (0x00FF)
#define MPI2_HEADER_VERSION_DEV_SHIFT (0)
#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
MPI2_HEADER_VERSION_DEV)
#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
/* EEDP escape mode */
#define MPI25_SCSIIO_EEDPFLAGS_DO_NOT_DISABLE_MODE (0x0040)
#define MPI2_FUNCTION_SCSI_IO_REQUEST (0x00) /* SCSI IO */
#define MPI2_FUNCTION_SCSI_TASK_MGMT (0x01)
#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x03)
#define MPI2_REQ_DESCRIPT_FLAGS_FP_IO (0x06)
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO (0x00)
#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING (0x02)
#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK (0x0E)
#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
#define MPI2_WRSEQ_FLUSH_KEY_VALUE (0x0)
#define MPI2_WRITE_SEQUENCE_OFFSET (0x00000004)
#define MPI2_WRSEQ_1ST_KEY_VALUE (0xF)
#define MPI2_WRSEQ_2ND_KEY_VALUE (0x4)
#define MPI2_WRSEQ_3RD_KEY_VALUE (0xB)
#define MPI2_WRSEQ_4TH_KEY_VALUE (0x2)
#define MPI2_WRSEQ_5TH_KEY_VALUE (0x7)
#define MPI2_WRSEQ_6TH_KEY_VALUE (0xD)
struct MPI25_IEEE_SGE_CHAIN64 {
__le64 Address;
__le32 Length;
__le16 Reserved1;
u8 NextChainOffset;
u8 Flags;
};
struct MPI2_SGE_SIMPLE_UNION {
__le32 FlagsLength;
union {
__le32 Address32;
__le64 Address64;
} u;
};
struct MPI2_SCSI_IO_CDB_EEDP32 {
u8 CDB[20]; /* 0x00 */
__be32 PrimaryReferenceTag; /* 0x14 */
__be16 PrimaryApplicationTag; /* 0x18 */
__be16 PrimaryApplicationTagMask; /* 0x1A */
__le32 TransferLength; /* 0x1C */
};
struct MPI2_SGE_CHAIN_UNION {
__le16 Length;
u8 NextChainOffset;
u8 Flags;
union {
__le32 Address32;
__le64 Address64;
} u;
};
struct MPI2_IEEE_SGE_SIMPLE32 {
__le32 Address;
__le32 FlagsLength;
};
struct MPI2_IEEE_SGE_CHAIN32 {
__le32 Address;
__le32 FlagsLength;
};
struct MPI2_IEEE_SGE_SIMPLE64 {
__le64 Address;
__le32 Length;
__le16 Reserved1;
u8 Reserved2;
u8 Flags;
};
struct MPI2_IEEE_SGE_CHAIN64 {
__le64 Address;
__le32 Length;
__le16 Reserved1;
u8 Reserved2;
u8 Flags;
};
union MPI2_IEEE_SGE_SIMPLE_UNION {
struct MPI2_IEEE_SGE_SIMPLE32 Simple32;
struct MPI2_IEEE_SGE_SIMPLE64 Simple64;
};
union MPI2_IEEE_SGE_CHAIN_UNION {
struct MPI2_IEEE_SGE_CHAIN32 Chain32;
struct MPI2_IEEE_SGE_CHAIN64 Chain64;
};
union MPI2_SGE_IO_UNION {
struct MPI2_SGE_SIMPLE_UNION MpiSimple;
struct MPI2_SGE_CHAIN_UNION MpiChain;
union MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
union MPI2_IEEE_SGE_CHAIN_UNION IeeeChain;
};
union MPI2_SCSI_IO_CDB_UNION {
u8 CDB32[32];
struct MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
struct MPI2_SGE_SIMPLE_UNION SGE;
};
/****************************************************************************
* SCSI Task Management messages
****************************************************************************/
/*SCSI Task Management Request Message */
struct MPI2_SCSI_TASK_MANAGE_REQUEST {
u16 DevHandle; /*0x00 */
u8 ChainOffset; /*0x02 */
u8 Function; /*0x03 */
u8 Reserved1; /*0x04 */
u8 TaskType; /*0x05 */
u8 Reserved2; /*0x06 */
u8 MsgFlags; /*0x07 */
u8 VP_ID; /*0x08 */
u8 VF_ID; /*0x09 */
u16 Reserved3; /*0x0A */
u8 LUN[8]; /*0x0C */
u32 Reserved4[7]; /*0x14 */
u16 TaskMID; /*0x30 */
u16 Reserved5; /*0x32 */
};
/*SCSI Task Management Reply Message */
struct MPI2_SCSI_TASK_MANAGE_REPLY {
u16 DevHandle; /*0x00 */
u8 MsgLength; /*0x02 */
u8 Function; /*0x03 */
u8 ResponseCode; /*0x04 */
u8 TaskType; /*0x05 */
u8 Reserved1; /*0x06 */
u8 MsgFlags; /*0x07 */
u8 VP_ID; /*0x08 */
u8 VF_ID; /*0x09 */
u16 Reserved2; /*0x0A */
u16 Reserved3; /*0x0C */
u16 IOCStatus; /*0x0E */
u32 IOCLogInfo; /*0x10 */
u32 TerminationCount; /*0x14 */
u32 ResponseInfo; /*0x18 */
};
struct MR_TM_REQUEST {
char request[128];
};
struct MR_TM_REPLY {
char reply[128];
};
/* SCSI Task Management Request Message */
struct MR_TASK_MANAGE_REQUEST {
/*To be type casted to struct MPI2_SCSI_TASK_MANAGE_REQUEST */
struct MR_TM_REQUEST TmRequest;
union {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved1:30;
u32 isTMForPD:1;
u32 isTMForLD:1;
#else
u32 isTMForLD:1;
u32 isTMForPD:1;
u32 reserved1:30;
#endif
u32 reserved2;
} tmReqFlags;
struct MR_TM_REPLY TMReply;
};
};
/* TaskType values */
#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
/* ResponseCode values */
#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
/*
* RAID SCSI IO Request Message
* Total SGE count will be one less than _MPI2_SCSI_IO_REQUEST
*/
struct MPI2_RAID_SCSI_IO_REQUEST {
__le16 DevHandle; /* 0x00 */
u8 ChainOffset; /* 0x02 */
u8 Function; /* 0x03 */
__le16 Reserved1; /* 0x04 */
u8 Reserved2; /* 0x06 */
u8 MsgFlags; /* 0x07 */
u8 VP_ID; /* 0x08 */
u8 VF_ID; /* 0x09 */
__le16 Reserved3; /* 0x0A */
__le32 SenseBufferLowAddress; /* 0x0C */
__le16 SGLFlags; /* 0x10 */
u8 SenseBufferLength; /* 0x12 */
u8 Reserved4; /* 0x13 */
u8 SGLOffset0; /* 0x14 */
u8 SGLOffset1; /* 0x15 */
u8 SGLOffset2; /* 0x16 */
u8 SGLOffset3; /* 0x17 */
__le32 SkipCount; /* 0x18 */
__le32 DataLength; /* 0x1C */
__le32 BidirectionalDataLength; /* 0x20 */
__le16 IoFlags; /* 0x24 */
__le16 EEDPFlags; /* 0x26 */
__le32 EEDPBlockSize; /* 0x28 */
__le32 SecondaryReferenceTag; /* 0x2C */
__le16 SecondaryApplicationTag; /* 0x30 */
__le16 ApplicationTagTranslationMask; /* 0x32 */
u8 LUN[8]; /* 0x34 */
__le32 Control; /* 0x3C */
union MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
union RAID_CONTEXT_UNION RaidContext; /* 0x60 */
union MPI2_SGE_IO_UNION SGL; /* 0x80 */
};
/*
* MPT RAID MFA IO Descriptor.
*/
struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR {
u32 RequestFlags:8;
u32 MessageAddress1:24;
u32 MessageAddress2;
};
/* Default Request Descriptor */
struct MPI2_DEFAULT_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le16 LMID; /* 0x04 */
__le16 DescriptorTypeDependent; /* 0x06 */
};
/* High Priority Request Descriptor */
struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le16 LMID; /* 0x04 */
__le16 Reserved1; /* 0x06 */
};
/* SCSI IO Request Descriptor */
struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le16 LMID; /* 0x04 */
__le16 DevHandle; /* 0x06 */
};
/* SCSI Target Request Descriptor */
struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le16 LMID; /* 0x04 */
__le16 IoIndex; /* 0x06 */
};
/* RAID Accelerator Request Descriptor */
struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
u8 RequestFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le16 LMID; /* 0x04 */
__le16 Reserved; /* 0x06 */
};
/* union of Request Descriptors */
union MEGASAS_REQUEST_DESCRIPTOR_UNION {
struct MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR MFAIo;
union {
struct {
__le32 low;
__le32 high;
} u;
__le64 Words;
};
};
/* Default Reply Descriptor */
struct MPI2_DEFAULT_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 DescriptorTypeDependent1; /* 0x02 */
__le32 DescriptorTypeDependent2; /* 0x04 */
};
/* Address Reply Descriptor */
struct MPI2_ADDRESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le32 ReplyFrameAddress; /* 0x04 */
};
/* SCSI IO Success Reply Descriptor */
struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le16 TaskTag; /* 0x04 */
__le16 Reserved1; /* 0x06 */
};
/* TargetAssist Success Reply Descriptor */
struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
u8 SequenceNumber; /* 0x04 */
u8 Reserved1; /* 0x05 */
__le16 IoIndex; /* 0x06 */
};
/* Target Command Buffer Reply Descriptor */
struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
u8 VP_ID; /* 0x02 */
u8 Flags; /* 0x03 */
__le16 InitiatorDevHandle; /* 0x04 */
__le16 IoIndex; /* 0x06 */
};
/* RAID Accelerator Success Reply Descriptor */
struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
u8 ReplyFlags; /* 0x00 */
u8 MSIxIndex; /* 0x01 */
__le16 SMID; /* 0x02 */
__le32 Reserved; /* 0x04 */
};
/* union of Reply Descriptors */
union MPI2_REPLY_DESCRIPTORS_UNION {
struct MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
struct MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
RAIDAcceleratorSuccess;
__le64 Words;
};
/* IOCInit Request message */
struct MPI2_IOC_INIT_REQUEST {
u8 WhoInit; /* 0x00 */
u8 Reserved1; /* 0x01 */
u8 ChainOffset; /* 0x02 */
u8 Function; /* 0x03 */
__le16 Reserved2; /* 0x04 */
u8 Reserved3; /* 0x06 */
u8 MsgFlags; /* 0x07 */
u8 VP_ID; /* 0x08 */
u8 VF_ID; /* 0x09 */
__le16 Reserved4; /* 0x0A */
__le16 MsgVersion; /* 0x0C */
__le16 HeaderVersion; /* 0x0E */
u32 Reserved5; /* 0x10 */
__le16 Reserved6; /* 0x14 */
u8 HostPageSize; /* 0x16 */
u8 HostMSIxVectors; /* 0x17 */
__le16 Reserved8; /* 0x18 */
__le16 SystemRequestFrameSize; /* 0x1A */
__le16 ReplyDescriptorPostQueueDepth; /* 0x1C */
__le16 ReplyFreeQueueDepth; /* 0x1E */
__le32 SenseBufferAddressHigh; /* 0x20 */
__le32 SystemReplyAddressHigh; /* 0x24 */
__le64 SystemRequestFrameBaseAddress; /* 0x28 */
__le64 ReplyDescriptorPostQueueAddress;/* 0x30 */
__le64 ReplyFreeQueueAddress; /* 0x38 */
__le64 TimeStamp; /* 0x40 */
};
/* mrpriv defines */
#define MR_PD_INVALID 0xFFFF
#define MR_DEVHANDLE_INVALID 0xFFFF
#define MAX_SPAN_DEPTH 8
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 01:05:04 -06:00
#define MAX_QUAD_DEPTH MAX_SPAN_DEPTH
#define MAX_RAIDMAP_SPAN_DEPTH (MAX_SPAN_DEPTH)
#define MAX_ROW_SIZE 32
#define MAX_RAIDMAP_ROW_SIZE (MAX_ROW_SIZE)
#define MAX_LOGICAL_DRIVES 64
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
#define MAX_LOGICAL_DRIVES_EXT 256
#define MAX_LOGICAL_DRIVES_DYN 512
#define MAX_RAIDMAP_LOGICAL_DRIVES (MAX_LOGICAL_DRIVES)
#define MAX_RAIDMAP_VIEWS (MAX_LOGICAL_DRIVES)
#define MAX_ARRAYS 128
#define MAX_RAIDMAP_ARRAYS (MAX_ARRAYS)
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
#define MAX_ARRAYS_EXT 256
#define MAX_API_ARRAYS_EXT (MAX_ARRAYS_EXT)
#define MAX_API_ARRAYS_DYN 512
#define MAX_PHYSICAL_DEVICES 256
#define MAX_RAIDMAP_PHYSICAL_DEVICES (MAX_PHYSICAL_DEVICES)
#define MAX_RAIDMAP_PHYSICAL_DEVICES_DYN 512
#define MR_DCMD_LD_MAP_GET_INFO 0x0300e101
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 05:53:11 -06:00
#define MR_DCMD_SYSTEM_PD_MAP_GET_INFO 0x0200e102
#define MR_DCMD_DRV_GET_TARGET_PROP 0x0200e103
#define MR_DCMD_CTRL_SHARED_HOST_MEM_ALLOC 0x010e8485 /* SR-IOV HB alloc*/
#define MR_DCMD_LD_VF_MAP_GET_ALL_LDS_111 0x03200200
#define MR_DCMD_LD_VF_MAP_GET_ALL_LDS 0x03150200
#define MR_DCMD_CTRL_SNAPDUMP_GET_PROPERTIES 0x01200100
#define MR_DCMD_CTRL_DEVICE_LIST_GET 0x01190600
struct MR_DEV_HANDLE_INFO {
__le16 curDevHdl;
u8 validHandles;
u8 interfaceType;
__le16 devHandle[2];
};
struct MR_ARRAY_INFO {
__le16 pd[MAX_RAIDMAP_ROW_SIZE];
};
struct MR_QUAD_ELEMENT {
__le64 logStart;
__le64 logEnd;
__le64 offsetInSpan;
__le32 diff;
__le32 reserved1;
};
struct MR_SPAN_INFO {
__le32 noElements;
__le32 reserved1;
struct MR_QUAD_ELEMENT quad[MAX_RAIDMAP_SPAN_DEPTH];
};
struct MR_LD_SPAN {
__le64 startBlk;
__le64 numBlks;
__le16 arrayRef;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 01:05:04 -06:00
u8 spanRowSize;
u8 spanRowDataSize;
u8 reserved[4];
};
struct MR_SPAN_BLOCK_INFO {
__le64 num_rows;
struct MR_LD_SPAN span;
struct MR_SPAN_INFO block_span_info;
};
#define MR_RAID_CTX_CPUSEL_0 0
#define MR_RAID_CTX_CPUSEL_1 1
#define MR_RAID_CTX_CPUSEL_2 2
#define MR_RAID_CTX_CPUSEL_3 3
#define MR_RAID_CTX_CPUSEL_FCFS 0xF
struct MR_CPU_AFFINITY_MASK {
union {
struct {
#ifndef MFI_BIG_ENDIAN
u8 hw_path:1;
u8 cpu0:1;
u8 cpu1:1;
u8 cpu2:1;
u8 cpu3:1;
u8 reserved:3;
#else
u8 reserved:3;
u8 cpu3:1;
u8 cpu2:1;
u8 cpu1:1;
u8 cpu0:1;
u8 hw_path:1;
#endif
};
u8 core_mask;
};
};
struct MR_IO_AFFINITY {
union {
struct {
struct MR_CPU_AFFINITY_MASK pdRead;
struct MR_CPU_AFFINITY_MASK pdWrite;
struct MR_CPU_AFFINITY_MASK ldRead;
struct MR_CPU_AFFINITY_MASK ldWrite;
};
u32 word;
};
u8 maxCores; /* Total cores + HW Path in ROC */
u8 reserved[3];
};
struct MR_LD_RAID {
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
u32 reserved4:2;
u32 fp_cache_bypass_capable:1;
u32 fp_rmw_capable:1;
u32 disable_coalescing:1;
u32 fpBypassRegionLock:1;
u32 tmCapable:1;
u32 fpNonRWCapable:1;
u32 fpReadAcrossStripe:1;
u32 fpWriteAcrossStripe:1;
u32 fpReadCapable:1;
u32 fpWriteCapable:1;
u32 encryptionType:8;
u32 pdPiMode:4;
u32 ldPiMode:4;
u32 reserved5:2;
u32 ra_capable:1;
u32 fpCapable:1;
#else
u32 fpCapable:1;
u32 ra_capable:1;
u32 reserved5:2;
u32 ldPiMode:4;
u32 pdPiMode:4;
u32 encryptionType:8;
u32 fpWriteCapable:1;
u32 fpReadCapable:1;
u32 fpWriteAcrossStripe:1;
u32 fpReadAcrossStripe:1;
u32 fpNonRWCapable:1;
u32 tmCapable:1;
u32 fpBypassRegionLock:1;
u32 disable_coalescing:1;
u32 fp_rmw_capable:1;
u32 fp_cache_bypass_capable:1;
u32 reserved4:2;
#endif
} capability;
__le32 reserved6;
__le64 size;
u8 spanDepth;
u8 level;
u8 stripeShift;
u8 rowSize;
u8 rowDataSize;
u8 writeMode;
u8 PRL;
u8 SRL;
__le16 targetId;
u8 ldState;
u8 regTypeReqOnWrite;
u8 modFactor;
u8 regTypeReqOnRead;
__le16 seqNum;
struct {
u32 ldSyncRequired:1;
u32 reserved:31;
} flags;
u8 LUN[8]; /* 0x24 8 byte LUN field used for SCSI IO's */
u8 fpIoTimeoutForLd;/*0x2C timeout value used by driver in FP IO*/
/* Ox2D This LD accept priority boost of this type */
u8 ld_accept_priority_type;
u8 reserved2[2]; /* 0x2E - 0x2F */
/* 0x30 - 0x33, Logical block size for the LD */
u32 logical_block_length;
struct {
#ifndef MFI_BIG_ENDIAN
/* 0x34, P_I_EXPONENT from READ CAPACITY 16 */
u32 ld_pi_exp:4;
/* 0x34, LOGICAL BLOCKS PER PHYSICAL
* BLOCK EXPONENT from READ CAPACITY 16
*/
u32 ld_logical_block_exp:4;
u32 reserved1:24; /* 0x34 */
#else
u32 reserved1:24; /* 0x34 */
/* 0x34, LOGICAL BLOCKS PER PHYSICAL
* BLOCK EXPONENT from READ CAPACITY 16
*/
u32 ld_logical_block_exp:4;
/* 0x34, P_I_EXPONENT from READ CAPACITY 16 */
u32 ld_pi_exp:4;
#endif
}; /* 0x34 - 0x37 */
/* 0x38 - 0x3f, This will determine which
* core will process LD IO and PD IO.
*/
struct MR_IO_AFFINITY cpuAffinity;
/* Bit definiations are specified by MR_IO_AFFINITY */
u8 reserved3[0x80 - 0x40]; /* 0x40 - 0x7f */
};
struct MR_LD_SPAN_MAP {
struct MR_LD_RAID ldRaid;
u8 dataArmMap[MAX_RAIDMAP_ROW_SIZE];
struct MR_SPAN_BLOCK_INFO spanBlock[MAX_RAIDMAP_SPAN_DEPTH];
};
struct MR_FW_RAID_MAP {
__le32 totalSize;
union {
struct {
__le32 maxLd;
__le32 maxSpanDepth;
__le32 maxRowSize;
__le32 maxPdCount;
__le32 maxArrays;
} validationInfo;
__le32 version[5];
};
__le32 ldCount;
__le32 Reserved1;
u8 ldTgtIdToLd[MAX_RAIDMAP_LOGICAL_DRIVES+
MAX_RAIDMAP_VIEWS];
u8 fpPdIoTimeoutSec;
u8 reserved2[7];
struct MR_ARRAY_INFO arMapInfo[MAX_RAIDMAP_ARRAYS];
struct MR_DEV_HANDLE_INFO devHndlInfo[MAX_RAIDMAP_PHYSICAL_DEVICES];
struct MR_LD_SPAN_MAP ldSpanMap[1];
};
struct IO_REQUEST_INFO {
u64 ldStartBlock;
u32 numBlocks;
u16 ldTgtId;
u8 isRead;
__le16 devHandle;
u8 pd_interface;
u64 pdBlock;
u8 fpOkForIo;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 01:05:04 -06:00
u8 IoforUnevenSpan;
u8 start_span;
u8 do_fp_rlbypass;
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 01:05:04 -06:00
u64 start_row;
u8 span_arm; /* span[7:5], arm[4:0] */
u8 pd_after_lb;
u16 r1_alt_dev_handle; /* raid 1/10 only */
bool ra_capable;
u8 data_arms;
};
struct MR_LD_TARGET_SYNC {
u8 targetId;
u8 reserved;
__le16 seqNum;
};
/*
* RAID Map descriptor Types.
* Each element should uniquely idetify one data structure in the RAID map
*/
enum MR_RAID_MAP_DESC_TYPE {
/* MR_DEV_HANDLE_INFO data */
RAID_MAP_DESC_TYPE_DEVHDL_INFO = 0x0,
/* target to Ld num Index map */
RAID_MAP_DESC_TYPE_TGTID_INFO = 0x1,
/* MR_ARRAY_INFO data */
RAID_MAP_DESC_TYPE_ARRAY_INFO = 0x2,
/* MR_LD_SPAN_MAP data */
RAID_MAP_DESC_TYPE_SPAN_INFO = 0x3,
RAID_MAP_DESC_TYPE_COUNT,
};
/*
* This table defines the offset, size and num elements of each descriptor
* type in the RAID Map buffer
*/
struct MR_RAID_MAP_DESC_TABLE {
/* Raid map descriptor type */
u32 raid_map_desc_type;
/* Offset into the RAID map buffer where
* descriptor data is saved
*/
u32 raid_map_desc_offset;
/* total size of the
* descriptor buffer
*/
u32 raid_map_desc_buffer_size;
/* Number of elements contained in the
* descriptor buffer
*/
u32 raid_map_desc_elements;
};
/*
* Dynamic Raid Map Structure.
*/
struct MR_FW_RAID_MAP_DYNAMIC {
u32 raid_map_size; /* total size of RAID Map structure */
u32 desc_table_offset;/* Offset of desc table into RAID map*/
u32 desc_table_size; /* Total Size of desc table */
/* Total Number of elements in the desc table */
u32 desc_table_num_elements;
u64 reserved1;
u32 reserved2[3]; /*future use */
/* timeout value used by driver in FP IOs */
u8 fp_pd_io_timeout_sec;
u8 reserved3[3];
/* when this seqNum increments, driver needs to
* release RMW buffers asap
*/
u32 rmw_fp_seq_num;
u16 ld_count; /* count of lds. */
u16 ar_count; /* count of arrays */
u16 span_count; /* count of spans */
u16 reserved4[3];
/*
* The below structure of pointers is only to be used by the driver.
* This is added in the ,API to reduce the amount of code changes
* needed in the driver to support dynamic RAID map Firmware should
* not update these pointers while preparing the raid map
*/
union {
struct {
struct MR_DEV_HANDLE_INFO *dev_hndl_info;
u16 *ld_tgt_id_to_ld;
struct MR_ARRAY_INFO *ar_map_info;
struct MR_LD_SPAN_MAP *ld_span_map;
};
u64 ptr_structure_size[RAID_MAP_DESC_TYPE_COUNT];
};
/*
* RAID Map descriptor table defines the layout of data in the RAID Map.
* The size of the descriptor table itself could change.
*/
/* Variable Size descriptor Table. */
struct MR_RAID_MAP_DESC_TABLE
raid_map_desc_table[RAID_MAP_DESC_TYPE_COUNT];
/* Variable Size buffer containing all data */
u32 raid_map_desc_data[1];
}; /* Dynamicaly sized RAID MAp structure */
#define IEEE_SGE_FLAGS_ADDR_MASK (0x03)
#define IEEE_SGE_FLAGS_SYSTEM_ADDR (0x00)
#define IEEE_SGE_FLAGS_IOCDDR_ADDR (0x01)
#define IEEE_SGE_FLAGS_IOCPLB_ADDR (0x02)
#define IEEE_SGE_FLAGS_IOCPLBNTA_ADDR (0x03)
#define IEEE_SGE_FLAGS_CHAIN_ELEMENT (0x80)
#define IEEE_SGE_FLAGS_END_OF_LIST (0x40)
#define MPI2_SGE_FLAGS_SHIFT (0x02)
#define IEEE_SGE_FLAGS_FORMAT_MASK (0xC0)
#define IEEE_SGE_FLAGS_FORMAT_IEEE (0x00)
#define IEEE_SGE_FLAGS_FORMAT_NVME (0x02)
#define MPI26_IEEE_SGE_FLAGS_NSF_MASK (0x1C)
#define MPI26_IEEE_SGE_FLAGS_NSF_MPI_IEEE (0x00)
#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP (0x08)
#define MPI26_IEEE_SGE_FLAGS_NSF_NVME_SGL (0x10)
#define MEGASAS_DEFAULT_SNAP_DUMP_WAIT_TIME 15
#define MEGASAS_MAX_SNAP_DUMP_WAIT_TIME 60
struct megasas_register_set;
struct megasas_instance;
union desc_word {
u64 word;
struct {
u32 low;
u32 high;
} u;
};
struct megasas_cmd_fusion {
struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
dma_addr_t io_request_phys_addr;
union MPI2_SGE_IO_UNION *sg_frame;
dma_addr_t sg_frame_phys_addr;
u8 *sense;
dma_addr_t sense_phys_addr;
struct list_head list;
struct scsi_cmnd *scmd;
struct megasas_instance *instance;
u8 retry_for_fw_reset;
union MEGASAS_REQUEST_DESCRIPTOR_UNION *request_desc;
/*
* Context for a MFI frame.
* Used to get the mfi cmd from list when a MFI cmd is completed
*/
u32 sync_cmd_idx;
u32 index;
u8 pd_r1_lb;
struct completion done;
u8 pd_interface;
u16 r1_alt_dev_handle; /* raid 1/10 only*/
bool cmd_completed; /* raid 1/10 fp writes status holder */
};
struct LD_LOAD_BALANCE_INFO {
u8 loadBalanceFlag;
u8 reserved1;
atomic_t scsi_pending_cmds[MAX_PHYSICAL_DEVICES];
u64 last_accessed_block[MAX_PHYSICAL_DEVICES];
};
[SCSI] megaraid_sas: Add support for Uneven Span PRL11 MegaRAID older Firmware does not support uneven span configuration for PRL11. E.g User wants to create 34 Driver PRL11 config, it was not possible using old firmware, since it was not supported configuration in old firmware Old Firmware expect even number of Drives in each span and same number of physical drives at each span. Considering above design, 17 Drives at Span-0 and 17 drives at span-1 was not possible. Now, using this new feature Firmware and Driver both required changes. New Firmware can allow user to create 16 Drives at span-0 and 18 Drives at span-1. This will allow user to create 34 Drives Uneven span PRL11. RAID map is interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. Since legacy RAID map consider Even Span design, there was no place to keep Uneven span information in existing Raid map. Because of this limitation, for Uneven span VD, driver can not use RAID map. This patch address the changes required in Driver to support Uneven span PRL11 support. 1. Driver will find if Firmware has UnevenSpanSupport or not by reading Controller Info. 2. If Firmware has UnvenSpan PRL11 support, then Driver will inform about its capability of handling UnevenSpan PRL11 to the firmware. 3. Driver will update its copy of span info on each time Raid map update is called. 4. Follow different IO path if it is Uneven Span. (For Uneven Span, Driver uses Span Set info to find relavent fields for that particular Virtual Disk) More verbose prints will be available by setting "SPAN_DEBUG" to 1 at compilation time. Signed-off-by: Sumit Saxena <sumit.saxena@lsi.com> Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-22 01:05:04 -06:00
/* SPAN_SET is info caclulated from span info from Raid map per LD */
typedef struct _LD_SPAN_SET {
u64 log_start_lba;
u64 log_end_lba;
u64 span_row_start;
u64 span_row_end;
u64 data_strip_start;
u64 data_strip_end;
u64 data_row_start;
u64 data_row_end;
u8 strip_offset[MAX_SPAN_DEPTH];
u32 span_row_data_width;
u32 diff;
u32 reserved[2];
} LD_SPAN_SET, *PLD_SPAN_SET;
typedef struct LOG_BLOCK_SPAN_INFO {
LD_SPAN_SET span_set[MAX_SPAN_DEPTH];
} LD_SPAN_INFO, *PLD_SPAN_INFO;
struct MR_FW_RAID_MAP_ALL {
struct MR_FW_RAID_MAP raidMap;
struct MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES - 1];
} __attribute__ ((packed));
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
struct MR_DRV_RAID_MAP {
/* total size of this structure, including this field.
* This feild will be manupulated by driver for ext raid map,
* else pick the value from firmware raid map.
*/
__le32 totalSize;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
union {
struct {
__le32 maxLd;
__le32 maxSpanDepth;
__le32 maxRowSize;
__le32 maxPdCount;
__le32 maxArrays;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
} validationInfo;
__le32 version[5];
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
};
/* timeout value used by driver in FP IOs*/
u8 fpPdIoTimeoutSec;
u8 reserved2[7];
__le16 ldCount;
__le16 arCount;
__le16 spanCount;
__le16 reserve3;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
struct MR_DEV_HANDLE_INFO
devHndlInfo[MAX_RAIDMAP_PHYSICAL_DEVICES_DYN];
u16 ldTgtIdToLd[MAX_LOGICAL_DRIVES_DYN];
struct MR_ARRAY_INFO arMapInfo[MAX_API_ARRAYS_DYN];
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
struct MR_LD_SPAN_MAP ldSpanMap[1];
};
/* Driver raid map size is same as raid map ext
* MR_DRV_RAID_MAP_ALL is created to sync with old raid.
* And it is mainly for code re-use purpose.
*/
struct MR_DRV_RAID_MAP_ALL {
struct MR_DRV_RAID_MAP raidMap;
struct MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES_DYN - 1];
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
} __packed;
struct MR_FW_RAID_MAP_EXT {
/* Not usred in new map */
u32 reserved;
union {
struct {
u32 maxLd;
u32 maxSpanDepth;
u32 maxRowSize;
u32 maxPdCount;
u32 maxArrays;
} validationInfo;
u32 version[5];
};
u8 fpPdIoTimeoutSec;
u8 reserved2[7];
__le16 ldCount;
__le16 arCount;
__le16 spanCount;
__le16 reserve3;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
struct MR_DEV_HANDLE_INFO devHndlInfo[MAX_RAIDMAP_PHYSICAL_DEVICES];
u8 ldTgtIdToLd[MAX_LOGICAL_DRIVES_EXT];
struct MR_ARRAY_INFO arMapInfo[MAX_API_ARRAYS_EXT];
struct MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES_EXT];
};
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 05:53:11 -06:00
/*
* * define MR_PD_CFG_SEQ structure for system PDs
* */
struct MR_PD_CFG_SEQ {
u16 seqNum;
u16 devHandle;
struct {
#if defined(__BIG_ENDIAN_BITFIELD)
u8 reserved:7;
u8 tmCapable:1;
#else
u8 tmCapable:1;
u8 reserved:7;
#endif
} capability;
u8 reserved;
u16 pd_target_id;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 05:53:11 -06:00
} __packed;
struct MR_PD_CFG_SEQ_NUM_SYNC {
__le32 size;
__le32 count;
struct MR_PD_CFG_SEQ seq[1];
} __packed;
/* stream detection */
struct STREAM_DETECT {
u64 next_seq_lba; /* next LBA to match sequential access */
struct megasas_cmd_fusion *first_cmd_fusion; /* first cmd in group */
struct megasas_cmd_fusion *last_cmd_fusion; /* last cmd in group */
u32 count_cmds_in_stream; /* count of host commands in this stream */
u16 num_sges_in_group; /* total number of SGEs in grouped IOs */
u8 is_read; /* SCSI OpCode for this stream */
u8 group_depth; /* total number of host commands in group */
/* TRUE if cannot add any more commands to this group */
bool group_flush;
u8 reserved[7]; /* pad to 64-bit alignment */
};
struct LD_STREAM_DETECT {
bool write_back; /* TRUE if WB, FALSE if WT */
bool fp_write_enabled;
bool members_ssds;
bool fp_cache_bypass_capable;
u32 mru_bit_map; /* bitmap used to track MRU and LRU stream indicies */
/* this is the array of stream detect structures (one per stream) */
struct STREAM_DETECT stream_track[MAX_STREAMS_TRACKED];
};
struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY {
u64 RDPQBaseAddress;
u32 Reserved1;
u32 Reserved2;
};
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 03:49:05 -06:00
struct rdpq_alloc_detail {
struct dma_pool *dma_pool_ptr;
dma_addr_t pool_entry_phys;
union MPI2_REPLY_DESCRIPTORS_UNION *pool_entry_virt;
};
struct fusion_context {
struct megasas_cmd_fusion **cmd_list;
dma_addr_t req_frames_desc_phys;
u8 *req_frames_desc;
struct dma_pool *io_request_frames_pool;
dma_addr_t io_request_frames_phys;
u8 *io_request_frames;
struct dma_pool *sg_dma_pool;
struct dma_pool *sense_dma_pool;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 03:49:05 -06:00
u8 *sense;
dma_addr_t sense_phys_addr;
dma_addr_t reply_frames_desc_phys[MAX_MSIX_QUEUES_FUSION];
union MPI2_REPLY_DESCRIPTORS_UNION *reply_frames_desc[MAX_MSIX_QUEUES_FUSION];
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 03:49:05 -06:00
struct rdpq_alloc_detail rdpq_tracker[RDPQ_MAX_CHUNK_COUNT];
struct dma_pool *reply_frames_desc_pool;
scsi: megaraid_sas: Add support for 64bit consistent DMA The latest MegaRAID Firmware (for Invader series) has support for 64bit DMA for both streaming and consistent DMA buffers. All Ventura series controller FW always support 64 bit consistent DMA. Also, on a few architectures 32bit DMA is not supported. Current driver always prefers 32bit for consistent DMA and 64bit for streaming DMA. This behavior was unintentional and carried forwarded from legacy controller FW. Need to enhance the driver to support 64bit consistent DMA buffers based on the firmware capability. Below is the DMA setting strategy in driver with this patch. For Ventura series, always try to set 64bit DMA mask. If it fails fall back to 32bit DMA mask. For Invader series and earlier generation controllers, first try to set to 32bit consistent DMA mask irrespective of FW capability. This is needed to ensure firmware downgrades do not break. If 32bit DMA setting fails, check FW capability and try seting to 64bit DMA mask. There are certain restrictions in the hardware for having all sense buffers and all reply descriptors to be in the same 4GB memory region. This limitation is h/w dependent and can not be changed in firmware. This limitation needs to be taken care in driver while allocating the buffers. There was a discussion regarding this - find details at below link. https://www.spinics.net/lists/linux-scsi/msg108251.html Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-10-19 03:49:05 -06:00
struct dma_pool *reply_frames_desc_pool_align;
u16 last_reply_idx[MAX_MSIX_QUEUES_FUSION];
u32 reply_q_depth;
u32 request_alloc_sz;
u32 reply_alloc_sz;
u32 io_frames_alloc_sz;
struct MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY *rdpq_virt;
dma_addr_t rdpq_phys;
u16 max_sge_in_main_msg;
u16 max_sge_in_chain;
u8 chain_offset_io_request;
u8 chain_offset_mfi_pthru;
struct MR_FW_RAID_MAP_DYNAMIC *ld_map[2];
dma_addr_t ld_map_phys[2];
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
/*Non dma-able memory. Driver local copy.*/
struct MR_DRV_RAID_MAP_ALL *ld_drv_map[2];
u32 max_map_sz;
u32 current_map_sz;
u32 old_map_sz;
u32 new_map_sz;
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
u32 drv_map_sz;
u32 drv_map_pages;
megaraid_sas: JBOD sequence number support Implemented JBOD map which will provide quick access for JBOD path and also provide sequence number. This will help hardware to fail command to the FW in case of any sequence mismatch. Fast Path I/O for JBOD will refer JBOD map (which has sequence number per JBOD device) instead of RAID map. Previously, the driver used RAID map to get device handle for fast path I/O and this not have sequence number information. Now, driver will use JBOD map instead. As part of error handling, if JBOD map is failed/not supported by firmware, driver will continue using legacy behavior. Now there will be three IO paths for JBOD (syspd): - JBOD map with sequence number (Fast Path) - RAID map without sequence number (Fast Path) - FW path via h/w exception queue deliberately setup devhandle 0xFFFF (FW path). Relevant data structures: - Driver send new DCMD MR_DCMD_SYSTEM_PD_MAP_GET_INFO for this purpose. - struct MR_PD_CFG_SEQ- This structure represent map of single physical device. - struct MR_PD_CFG_SEQ_NUM_SYNC- This structure represent whole JBOD map in general(size, count of sysPDs configured, struct MR_PD_CFG_SEQ of syspD with 0 index). - JBOD sequence map size is: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) which is allocated while setting up JBOD map at driver load time. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Martin Petersen <martin.petersen@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-08-31 05:53:11 -06:00
struct MR_PD_CFG_SEQ_NUM_SYNC *pd_seq_sync[JBOD_MAPS_COUNT];
dma_addr_t pd_seq_phys[JBOD_MAPS_COUNT];
u8 fast_path_io;
struct LD_LOAD_BALANCE_INFO *load_balance_info;
u32 load_balance_info_pages;
LD_SPAN_INFO *log_to_span;
u32 log_to_span_pages;
struct LD_STREAM_DETECT **stream_detect_by_ld;
dma_addr_t ioc_init_request_phys;
struct MPI2_IOC_INIT_REQUEST *ioc_init_request;
struct megasas_cmd *ioc_init_cmd;
bool pcie_bw_limitation;
bool r56_div_offload;
};
union desc_value {
__le64 word;
struct {
__le32 low;
__le32 high;
} u;
};
enum CMD_RET_VALUES {
REFIRE_CMD = 1,
COMPLETE_CMD = 2,
RETURN_CMD = 3,
};
struct MR_SNAPDUMP_PROPERTIES {
u8 offload_num;
u8 max_num_supported;
u8 cur_num_supported;
u8 trigger_min_num_sec_before_ocr;
u8 reserved[12];
};
struct megasas_debugfs_buffer {
void *buf;
u32 len;
};
void megasas_free_cmds_fusion(struct megasas_instance *instance);
int megasas_ioc_init_fusion(struct megasas_instance *instance);
u8 megasas_get_map_info(struct megasas_instance *instance);
int megasas_sync_map_info(struct megasas_instance *instance);
void megasas_release_fusion(struct megasas_instance *instance);
void megasas_reset_reply_desc(struct megasas_instance *instance);
int megasas_check_mpio_paths(struct megasas_instance *instance,
struct scsi_cmnd *scmd);
void megasas_fusion_ocr_wq(struct work_struct *work);
megaraid_sas : Extended VD support Resending the patch. Addressed the review comments from Tomas Henzl. reserved1 field(part of union) of Raid map struct was not required so it is removed. Current MegaRAID firmware and hence the driver only supported 64VDs. E.g: If the user wants to create more than 64VD on a controller, it is not possible on current firmware/driver. New feature and requirement to support upto 256VD, firmware/driver/apps need changes. In addition to that there must be a backward compatibility of the new driver with the older firmware and vice versa. RAID map is the interface between Driver and FW to fetch all required fields(attributes) for each Virtual Drives. In the earlier design driver was using the FW copy of RAID map where as in the new design the Driver will keep the RAID map copy of its own; on which it will operate for any raid map access in fast path. Local driver raid map copy will provide ease of access through out the code and provide generic interface for future FW raid map changes. For the backward compatibility driver will notify FW that it supports 256VD to the FW in driver capability field. Based on the controller properly returned by the FW, the Driver will know whether it supports 256VD or not and will copy the RAID map accordingly. At any given time, driver will always have old or new Raid map. So with this changes, driver can also work in host lock less mode. Please see next patch which enable host lock less mode for megaraid_sas driver. Signed-off-by: Sumit Saxena <sumit.saxena@avagotech.com> Signed-off-by: Kashyap Desai <kashyap.desai@avagotech.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-12 07:27:33 -06:00
#endif /* _MEGARAID_SAS_FUSION_H_ */