1
0
Fork 0
alistair23-linux/lib/lz4/lz4_decompress.c

710 lines
20 KiB
C
Raw Normal View History

decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
/*
* LZ4 - Fast LZ compression algorithm
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
* Copyright (C) 2011 - 2016, Yann Collet.
* BSD 2 - Clause License (http://www.opensource.org/licenses/bsd - license.php)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
* copyright notice, this list of conditions and the following disclaimer
* in the documentation and/or other materials provided with the
* distribution.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
* You can contact the author at :
* - LZ4 homepage : http://www.lz4.org
* - LZ4 source repository : https://github.com/lz4/lz4
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
*
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
* Changed for kernel usage by:
* Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
*/
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/*-************************************
* Dependencies
**************************************/
#include <linux/lz4.h>
#include "lz4defs.h"
#include <linux/init.h>
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/unaligned.h>
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/*-*****************************
* Decompression functions
*******************************/
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
#define DEBUGLOG(l, ...) {} /* disabled */
#ifndef assert
#define assert(condition) ((void)0)
#endif
/*
* LZ4_decompress_generic() :
* This generic decompression function covers all use cases.
* It shall be instantiated several times, using different sets of directives.
* Note that it is important for performance that this function really get inlined,
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
* in order to remove useless branches during compilation optimization.
*/
static FORCE_INLINE int LZ4_decompress_generic(
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
const char * const src,
char * const dst,
int srcSize,
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/*
* If endOnInput == endOnInputSize,
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
* this value is `dstCapacity`
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
*/
int outputSize,
/* endOnOutputSize, endOnInputSize */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
endCondition_directive endOnInput,
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* full, partial */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
earlyEnd_directive partialDecoding,
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* noDict, withPrefix64k, usingExtDict */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
dict_directive dict,
/* always <= dst, == dst when no prefix */
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
const BYTE * const lowPrefix,
/* only if dict == usingExtDict */
const BYTE * const dictStart,
/* note : = 0 if noDict */
const size_t dictSize
)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
{
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
const BYTE *ip = (const BYTE *) src;
const BYTE * const iend = ip + srcSize;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
BYTE *op = (BYTE *) dst;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
BYTE * const oend = op + outputSize;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
BYTE *cpy;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
const BYTE * const dictEnd = (const BYTE *)dictStart + dictSize;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
static const unsigned int inc32table[8] = {0, 1, 2, 1, 0, 4, 4, 4};
static const int dec64table[8] = {0, 0, 0, -1, -4, 1, 2, 3};
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
const int safeDecode = (endOnInput == endOnInputSize);
const int checkOffset = ((safeDecode) && (dictSize < (int)(64 * KB)));
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
/* Set up the "end" pointers for the shortcut. */
const BYTE *const shortiend = iend -
(endOnInput ? 14 : 8) /*maxLL*/ - 2 /*offset*/;
const BYTE *const shortoend = oend -
(endOnInput ? 14 : 8) /*maxLL*/ - 18 /*maxML*/;
DEBUGLOG(5, "%s (srcSize:%i, dstSize:%i)", __func__,
srcSize, outputSize);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* Special cases */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
assert(lowPrefix <= op);
assert(src != NULL);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* Empty output buffer */
if ((endOnInput) && (unlikely(outputSize == 0)))
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
return ((srcSize == 1) && (*ip == 0)) ? 0 : -1;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
if ((!endOnInput) && (unlikely(outputSize == 0)))
return (*ip == 0 ? 1 : -1);
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if ((endOnInput) && unlikely(srcSize == 0))
return -1;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* Main Loop : decode sequences */
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
while (1) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
size_t length;
const BYTE *match;
size_t offset;
/* get literal length */
unsigned int const token = *ip++;
length = token>>ML_BITS;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
/* ip < iend before the increment */
assert(!endOnInput || ip <= iend);
/*
* A two-stage shortcut for the most common case:
* 1) If the literal length is 0..14, and there is enough
* space, enter the shortcut and copy 16 bytes on behalf
* of the literals (in the fast mode, only 8 bytes can be
* safely copied this way).
* 2) Further if the match length is 4..18, copy 18 bytes
* in a similar manner; but we ensure that there's enough
* space in the output for those 18 bytes earlier, upon
* entering the shortcut (in other words, there is a
* combined check for both stages).
*/
if ((endOnInput ? length != RUN_MASK : length <= 8)
/*
* strictly "less than" on input, to re-enter
* the loop with at least one byte
*/
&& likely((endOnInput ? ip < shortiend : 1) &
(op <= shortoend))) {
/* Copy the literals */
memcpy(op, ip, endOnInput ? 16 : 8);
op += length; ip += length;
/*
* The second stage:
* prepare for match copying, decode full info.
* If it doesn't work out, the info won't be wasted.
*/
length = token & ML_MASK; /* match length */
offset = LZ4_readLE16(ip);
ip += 2;
match = op - offset;
assert(match <= op); /* check overflow */
/* Do not deal with overlapping matches. */
if ((length != ML_MASK) &&
(offset >= 8) &&
(dict == withPrefix64k || match >= lowPrefix)) {
/* Copy the match. */
memcpy(op + 0, match + 0, 8);
memcpy(op + 8, match + 8, 8);
memcpy(op + 16, match + 16, 2);
op += length + MINMATCH;
/* Both stages worked, load the next token. */
continue;
}
/*
* The second stage didn't work out, but the info
* is ready. Propel it right to the point of match
* copying.
*/
goto _copy_match;
}
/* decode literal length */
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
if (length == RUN_MASK) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
unsigned int s;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (unlikely(endOnInput ? ip >= iend - RUN_MASK : 0)) {
/* overflow detection */
goto _output_error;
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
do {
s = *ip++;
length += s;
} while (likely(endOnInput
? ip < iend - RUN_MASK
: 1) & (s == 255));
if ((safeDecode)
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
&& unlikely((uptrval)(op) +
length < (uptrval)(op))) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* overflow detection */
goto _output_error;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
if ((safeDecode)
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
&& unlikely((uptrval)(ip) +
length < (uptrval)(ip))) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* overflow detection */
goto _output_error;
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
/* copy literals */
cpy = op + length;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
LZ4_STATIC_ASSERT(MFLIMIT >= WILDCOPYLENGTH);
if (((endOnInput) && ((cpy > oend - MFLIMIT)
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
|| (ip + length > iend - (2 + 1 + LASTLITERALS))))
|| ((!endOnInput) && (cpy > oend - WILDCOPYLENGTH))) {
if (partialDecoding) {
if (cpy > oend) {
/*
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
* Partial decoding :
* stop in the middle of literal segment
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
*/
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
cpy = oend;
length = oend - op;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
if ((endOnInput)
&& (ip + length > iend)) {
/*
* Error :
* read attempt beyond
* end of input buffer
*/
goto _output_error;
}
} else {
if ((!endOnInput)
&& (cpy != oend)) {
/*
* Error :
* block decoding must
* stop exactly there
*/
goto _output_error;
}
if ((endOnInput)
&& ((ip + length != iend)
|| (cpy > oend))) {
/*
* Error :
* input must be consumed
*/
goto _output_error;
}
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
memcpy(op, ip, length);
ip += length;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
op += length;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* Necessarily EOF, due to parsing restrictions */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (!partialDecoding || (cpy == oend))
break;
} else {
/* may overwrite up to WILDCOPYLENGTH beyond cpy */
LZ4_wildCopy(op, ip, cpy);
ip += length;
op = cpy;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
/* get offset */
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
offset = LZ4_readLE16(ip);
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
ip += 2;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
match = op - offset;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
/* get matchlength */
length = token & ML_MASK;
_copy_match:
if ((checkOffset) && (unlikely(match + dictSize < lowPrefix))) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* Error : offset outside buffers */
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
goto _output_error;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
/* costs ~1%; silence an msan warning when offset == 0 */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
/*
* note : when partialDecoding, there is no guarantee that
* at least 4 bytes remain available in output buffer
*/
if (!partialDecoding) {
assert(oend > op);
assert(oend - op >= 4);
LZ4_write32(op, (U32)offset);
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
if (length == ML_MASK) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
unsigned int s;
do {
s = *ip++;
if ((endOnInput) && (ip > iend - LASTLITERALS))
goto _output_error;
length += s;
} while (s == 255);
if ((safeDecode)
&& unlikely(
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
(uptrval)(op) + length < (uptrval)op)) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* overflow detection */
goto _output_error;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
length += MINMATCH;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
/* match starting within external dictionary */
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
if ((dict == usingExtDict) && (match < lowPrefix)) {
if (unlikely(op + length > oend - LASTLITERALS)) {
/* doesn't respect parsing restriction */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (!partialDecoding)
goto _output_error;
length = min(length, (size_t)(oend - op));
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
if (length <= (size_t)(lowPrefix - match)) {
/*
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
* match fits entirely within external
* dictionary : just copy
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
*/
memmove(op, dictEnd - (lowPrefix - match),
length);
op += length;
} else {
/*
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
* match stretches into both external
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
* dictionary and current block
*/
size_t const copySize = (size_t)(lowPrefix - match);
size_t const restSize = length - copySize;
memcpy(op, dictEnd - copySize, copySize);
op += copySize;
if (restSize > (size_t)(op - lowPrefix)) {
/* overlap copy */
BYTE * const endOfMatch = op + restSize;
const BYTE *copyFrom = lowPrefix;
while (op < endOfMatch)
*op++ = *copyFrom++;
} else {
memcpy(op, lowPrefix, restSize);
op += restSize;
}
}
continue;
}
/* copy match within block */
cpy = op + length;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
/*
* partialDecoding :
* may not respect endBlock parsing restrictions
*/
assert(op <= oend);
if (partialDecoding &&
(cpy > oend - MATCH_SAFEGUARD_DISTANCE)) {
size_t const mlen = min(length, (size_t)(oend - op));
const BYTE * const matchEnd = match + mlen;
BYTE * const copyEnd = op + mlen;
if (matchEnd > op) {
/* overlap copy */
while (op < copyEnd)
*op++ = *match++;
} else {
memcpy(op, match, mlen);
}
op = copyEnd;
if (op == oend)
break;
continue;
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (unlikely(offset < 8)) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
op[0] = match[0];
op[1] = match[1];
op[2] = match[2];
op[3] = match[3];
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
match += inc32table[offset];
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
memcpy(op + 4, match, 4);
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
match -= dec64table[offset];
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
} else {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
LZ4_copy8(op, match);
match += 8;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
op += 8;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (unlikely(cpy > oend - MATCH_SAFEGUARD_DISTANCE)) {
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
BYTE * const oCopyLimit = oend - (WILDCOPYLENGTH - 1);
if (cpy > oend - LASTLITERALS) {
/*
* Error : last LASTLITERALS bytes
* must be literals (uncompressed)
*/
goto _output_error;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
if (op < oCopyLimit) {
LZ4_wildCopy(op, match, oCopyLimit);
match += oCopyLimit - op;
op = oCopyLimit;
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
while (op < cpy)
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
*op++ = *match++;
} else {
LZ4_copy8(op, match);
if (length > 16)
LZ4_wildCopy(op + 8, match + 8, cpy);
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
op = cpy; /* wildcopy correction */
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
/* end of decoding */
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
if (endOnInput) {
/* Nb of output bytes decoded */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
return (int) (((char *)op) - dst);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
} else {
/* Nb of input bytes read */
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
return (int) (((const char *)ip) - src);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/* Overflow error detected */
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
_output_error:
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
return (int) (-(((const char *)ip) - src)) - 1;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
int LZ4_decompress_safe(const char *source, char *dest,
int compressedSize, int maxDecompressedSize)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
{
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
return LZ4_decompress_generic(source, dest,
compressedSize, maxDecompressedSize,
endOnInputSize, decode_full_block,
noDict, (BYTE *)dest, NULL, 0);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
int LZ4_decompress_safe_partial(const char *src, char *dst,
int compressedSize, int targetOutputSize, int dstCapacity)
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
{
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
dstCapacity = min(targetOutputSize, dstCapacity);
return LZ4_decompress_generic(src, dst, compressedSize, dstCapacity,
endOnInputSize, partial_decode,
noDict, (BYTE *)dst, NULL, 0);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
int LZ4_decompress_fast(const char *source, char *dest, int originalSize)
{
return LZ4_decompress_generic(source, dest, 0, originalSize,
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
endOnOutputSize, decode_full_block,
withPrefix64k,
(BYTE *)dest - 64 * KB, NULL, 0);
}
/* ===== Instantiate a few more decoding cases, used more than once. ===== */
int LZ4_decompress_safe_withPrefix64k(const char *source, char *dest,
int compressedSize, int maxOutputSize)
{
return LZ4_decompress_generic(source, dest,
compressedSize, maxOutputSize,
endOnInputSize, decode_full_block,
withPrefix64k,
(BYTE *)dest - 64 * KB, NULL, 0);
}
static int LZ4_decompress_safe_withSmallPrefix(const char *source, char *dest,
int compressedSize,
int maxOutputSize,
size_t prefixSize)
{
return LZ4_decompress_generic(source, dest,
compressedSize, maxOutputSize,
endOnInputSize, decode_full_block,
noDict,
(BYTE *)dest - prefixSize, NULL, 0);
}
int LZ4_decompress_safe_forceExtDict(const char *source, char *dest,
int compressedSize, int maxOutputSize,
const void *dictStart, size_t dictSize)
{
return LZ4_decompress_generic(source, dest,
compressedSize, maxOutputSize,
endOnInputSize, decode_full_block,
usingExtDict, (BYTE *)dest,
(const BYTE *)dictStart, dictSize);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
static int LZ4_decompress_fast_extDict(const char *source, char *dest,
int originalSize,
const void *dictStart, size_t dictSize)
{
return LZ4_decompress_generic(source, dest,
0, originalSize,
endOnOutputSize, decode_full_block,
usingExtDict, (BYTE *)dest,
(const BYTE *)dictStart, dictSize);
}
/*
* The "double dictionary" mode, for use with e.g. ring buffers: the first part
* of the dictionary is passed as prefix, and the second via dictStart + dictSize.
* These routines are used only once, in LZ4_decompress_*_continue().
*/
static FORCE_INLINE
int LZ4_decompress_safe_doubleDict(const char *source, char *dest,
int compressedSize, int maxOutputSize,
size_t prefixSize,
const void *dictStart, size_t dictSize)
{
return LZ4_decompress_generic(source, dest,
compressedSize, maxOutputSize,
endOnInputSize, decode_full_block,
usingExtDict, (BYTE *)dest - prefixSize,
(const BYTE *)dictStart, dictSize);
}
static FORCE_INLINE
int LZ4_decompress_fast_doubleDict(const char *source, char *dest,
int originalSize, size_t prefixSize,
const void *dictStart, size_t dictSize)
{
return LZ4_decompress_generic(source, dest,
0, originalSize,
endOnOutputSize, decode_full_block,
usingExtDict, (BYTE *)dest - prefixSize,
(const BYTE *)dictStart, dictSize);
}
/* ===== streaming decompression functions ===== */
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
int LZ4_setStreamDecode(LZ4_streamDecode_t *LZ4_streamDecode,
const char *dictionary, int dictSize)
{
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
LZ4_streamDecode_t_internal *lz4sd =
&LZ4_streamDecode->internal_donotuse;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
lz4sd->prefixSize = (size_t) dictSize;
lz4sd->prefixEnd = (const BYTE *) dictionary + dictSize;
lz4sd->externalDict = NULL;
lz4sd->extDictSize = 0;
return 1;
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
/*
* *_continue() :
* These decoding functions allow decompression of multiple blocks
* in "streaming" mode.
* Previously decoded blocks must still be available at the memory
* position where they were decoded.
* If it's not possible, save the relevant part of
* decoded data into a safe buffer,
* and indicate where it stands using LZ4_setStreamDecode()
*/
int LZ4_decompress_safe_continue(LZ4_streamDecode_t *LZ4_streamDecode,
const char *source, char *dest, int compressedSize, int maxOutputSize)
{
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
LZ4_streamDecode_t_internal *lz4sd =
&LZ4_streamDecode->internal_donotuse;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
int result;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (lz4sd->prefixSize == 0) {
/* The first call, no dictionary yet. */
assert(lz4sd->extDictSize == 0);
result = LZ4_decompress_safe(source, dest,
compressedSize, maxOutputSize);
if (result <= 0)
return result;
lz4sd->prefixSize = result;
lz4sd->prefixEnd = (BYTE *)dest + result;
} else if (lz4sd->prefixEnd == (BYTE *)dest) {
/* They're rolling the current segment. */
if (lz4sd->prefixSize >= 64 * KB - 1)
result = LZ4_decompress_safe_withPrefix64k(source, dest,
compressedSize, maxOutputSize);
else if (lz4sd->extDictSize == 0)
result = LZ4_decompress_safe_withSmallPrefix(source,
dest, compressedSize, maxOutputSize,
lz4sd->prefixSize);
else
result = LZ4_decompress_safe_doubleDict(source, dest,
compressedSize, maxOutputSize,
lz4sd->prefixSize,
lz4sd->externalDict, lz4sd->extDictSize);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
if (result <= 0)
return result;
lz4sd->prefixSize += result;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
lz4sd->prefixEnd += result;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
} else {
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
/*
* The buffer wraps around, or they're
* switching to another buffer.
*/
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
lz4sd->extDictSize = lz4sd->prefixSize;
lz4sd->externalDict = lz4sd->prefixEnd - lz4sd->extDictSize;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
result = LZ4_decompress_safe_forceExtDict(source, dest,
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
compressedSize, maxOutputSize,
lz4sd->externalDict, lz4sd->extDictSize);
if (result <= 0)
return result;
lz4sd->prefixSize = result;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
lz4sd->prefixEnd = (BYTE *)dest + result;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
return result;
}
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
int LZ4_decompress_fast_continue(LZ4_streamDecode_t *LZ4_streamDecode,
const char *source, char *dest, int originalSize)
{
LZ4_streamDecode_t_internal *lz4sd = &LZ4_streamDecode->internal_donotuse;
int result;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (lz4sd->prefixSize == 0) {
assert(lz4sd->extDictSize == 0);
result = LZ4_decompress_fast(source, dest, originalSize);
if (result <= 0)
return result;
lz4sd->prefixSize = originalSize;
lz4sd->prefixEnd = (BYTE *)dest + originalSize;
} else if (lz4sd->prefixEnd == (BYTE *)dest) {
if (lz4sd->prefixSize >= 64 * KB - 1 ||
lz4sd->extDictSize == 0)
result = LZ4_decompress_fast(source, dest,
originalSize);
else
result = LZ4_decompress_fast_doubleDict(source, dest,
originalSize, lz4sd->prefixSize,
lz4sd->externalDict, lz4sd->extDictSize);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
if (result <= 0)
return result;
lz4sd->prefixSize += originalSize;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
lz4sd->prefixEnd += originalSize;
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
} else {
lz4sd->extDictSize = lz4sd->prefixSize;
lz4sd->externalDict = lz4sd->prefixEnd - lz4sd->extDictSize;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
result = LZ4_decompress_fast_extDict(source, dest,
originalSize, lz4sd->externalDict, lz4sd->extDictSize);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
if (result <= 0)
return result;
lz4sd->prefixSize = originalSize;
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
lz4sd->prefixEnd = (BYTE *)dest + originalSize;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
return result;
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
int LZ4_decompress_safe_usingDict(const char *source, char *dest,
int compressedSize, int maxOutputSize,
const char *dictStart, int dictSize)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
{
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
if (dictSize == 0)
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
return LZ4_decompress_safe(source, dest,
compressedSize, maxOutputSize);
if (dictStart+dictSize == dest) {
if (dictSize >= 64 * KB - 1)
return LZ4_decompress_safe_withPrefix64k(source, dest,
compressedSize, maxOutputSize);
return LZ4_decompress_safe_withSmallPrefix(source, dest,
compressedSize, maxOutputSize, dictSize);
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
}
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
return LZ4_decompress_safe_forceExtDict(source, dest,
compressedSize, maxOutputSize, dictStart, dictSize);
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
int LZ4_decompress_fast_usingDict(const char *source, char *dest,
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
int originalSize,
const char *dictStart, int dictSize)
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
{
lib/lz4: update LZ4 decompressor module Update the LZ4 compression module based on LZ4 v1.8.3 in order for the erofs file system to use the newest LZ4_decompress_safe_partial() which can now decode exactly the nb of bytes requested [1] to take place of the open hacked code in the erofs file system itself. Currently, apart from the erofs file system, no other users use LZ4_decompress_safe_partial, so no worry about the interface. In addition, LZ4 v1.8.x boosts up decompression speed compared to the current code which is based on LZ4 v1.7.3, mainly due to shortcut optimization for the specific common LZ4-sequences [2]. lzbench testdata (tested in kirin710, 8 cores, 4 big cores at 2189Mhz, 2GB DDR RAM at 1622Mhz, with enwik8 testdata [3]): Compressor name Compress. Decompress. Compr. size Ratio Filename memcpy 5004 MB/s 4924 MB/s 100000000 100.00 enwik8 lz4hc 1.7.3 -9 12 MB/s 653 MB/s 42203253 42.20 enwik8 lz4hc 1.8.0 -9 12 MB/s 908 MB/s 42203096 42.20 enwik8 lz4hc 1.8.3 -9 11 MB/s 965 MB/s 42203094 42.20 enwik8 [1] https://github.com/lz4/lz4/issues/566 https://github.com/lz4/lz4/commit/08d347b5b217b011ff7487130b79480d8cfdaeb8 [2] v1.8.1 perf: slightly faster compression and decompression speed https://github.com/lz4/lz4/commit/a31b7058cb97e4393da55e78a77a1c6f0c9ae038 v1.8.2 perf: slightly faster HC compression and decompression speed https://github.com/lz4/lz4/commit/45f8603aae389d34c689d3ff7427b314071ccd2c https://github.com/lz4/lz4/commit/1a191b3f8d26b50a7c1d41590b529ec308d768cd [3] http://mattmahoney.net/dc/textdata.html http://mattmahoney.net/dc/enwik8.zip Link: http://lkml.kernel.org/r/1537181207-21932-1-git-send-email-gaoxiang25@huawei.com Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Tested-by: Guo Xuenan <guoxuenan@huawei.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Yann Collet <yann.collet.73@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Fang Wei <fangwei1@huawei.com> Cc: Chao Yu <yuchao0@huawei.com> Cc: Miao Xie <miaoxie@huawei.com> Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Cc: Kyungsik Lee <kyungsik.lee@lge.com> Cc: <weidu.du@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:28 -06:00
if (dictSize == 0 || dictStart + dictSize == dest)
return LZ4_decompress_fast(source, dest, originalSize);
return LZ4_decompress_fast_extDict(source, dest, originalSize,
dictStart, dictSize);
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
}
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
#ifndef STATIC
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
EXPORT_SYMBOL(LZ4_decompress_safe);
EXPORT_SYMBOL(LZ4_decompress_safe_partial);
EXPORT_SYMBOL(LZ4_decompress_fast);
EXPORT_SYMBOL(LZ4_setStreamDecode);
EXPORT_SYMBOL(LZ4_decompress_safe_continue);
EXPORT_SYMBOL(LZ4_decompress_fast_continue);
EXPORT_SYMBOL(LZ4_decompress_safe_usingDict);
EXPORT_SYMBOL(LZ4_decompress_fast_usingDict);
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
MODULE_LICENSE("Dual BSD/GPL");
lib: update LZ4 compressor module Patch series "Update LZ4 compressor module", v7. This patchset updates the LZ4 compression module to a version based on LZ4 v1.7.3 allowing to use the fast compression algorithm aka LZ4 fast which provides an "acceleration" parameter as a tradeoff between high compression ratio and high compression speed. We want to use LZ4 fast in order to support compression in lustre and (mostly, based on that) investigate data reduction techniques in behalf of storage systems. Also, it will be useful for other users of LZ4 compression, as with LZ4 fast it is possible to enable applications to use fast and/or high compression depending on the usecase. For instance, ZRAM is offering a LZ4 backend and could benefit from an updated LZ4 in the kernel. LZ4 homepage: http://www.lz4.org/ LZ4 source repository: https://github.com/lz4/lz4 Source version: 1.7.3 Benchmark (taken from [1], Core i5-4300U @1.9GHz): ----------------|--------------|----------------|---------- Compressor | Compression | Decompression | Ratio ----------------|--------------|----------------|---------- memcpy | 4200 MB/s | 4200 MB/s | 1.000 LZ4 fast 50 | 1080 MB/s | 2650 MB/s | 1.375 LZ4 fast 17 | 680 MB/s | 2220 MB/s | 1.607 LZ4 fast 5 | 475 MB/s | 1920 MB/s | 1.886 LZ4 default | 385 MB/s | 1850 MB/s | 2.101 [1] http://fastcompression.blogspot.de/2015/04/sampling-or-faster-lz4.html [PATCH 1/5] lib: Update LZ4 compressor module [PATCH 2/5] lib/decompress_unlz4: Change module to work with new LZ4 module version [PATCH 3/5] crypto: Change LZ4 modules to work with new LZ4 module version [PATCH 4/5] fs/pstore: fs/squashfs: Change usage of LZ4 to work with new LZ4 version [PATCH 5/5] lib/lz4: Remove back-compat wrappers This patch (of 5): Update the LZ4 kernel module to LZ4 v1.7.3 by Yann Collet. The kernel module is inspired by the previous work by Chanho Min. The updated LZ4 module will not break existing code since the patchset contains appropriate changes. API changes: New method LZ4_compress_fast which differs from the variant available in kernel by the new acceleration parameter, allowing to trade compression ratio for more compression speed and vice versa. LZ4_decompress_fast is the respective decompression method, featuring a very fast decoder (multiple GB/s per core), able to reach RAM speed in multi-core systems. The decompressor allows to decompress data compressed with LZ4 fast as well as the LZ4 HC (high compression) algorithm. Also the useful functions LZ4_decompress_safe_partial and LZ4_compress_destsize were added. The latter reverses the logic by trying to compress as much data as possible from source to dest while the former aims to decompress partial blocks of data. A bunch of streaming functions were also added which allow compressig/decompressing data in multiple steps (so called "streaming mode"). The methods lz4_compress and lz4_decompress_unknownoutputsize are now known as LZ4_compress_default respectivley LZ4_decompress_safe. The old methods will be removed since there's no callers left in the code. [arnd@arndb.de: fix KERNEL_LZ4 support] Link: http://lkml.kernel.org/r/20170208211946.2839649-1-arnd@arndb.de [akpm@linux-foundation.org: simplify] [akpm@linux-foundation.org: fix the simplification] [4sschmid@informatik.uni-hamburg.de: fix performance regressions] Link: http://lkml.kernel.org/r/1486898178-17125-2-git-send-email-4sschmid@informatik.uni-hamburg.de [4sschmid@informatik.uni-hamburg.de: v8] Link: http://lkml.kernel.org/r/1487182598-15351-2-git-send-email-4sschmid@informatik.uni-hamburg.de Link: http://lkml.kernel.org/r/1486321748-19085-2-git-send-email-4sschmid@informatik.uni-hamburg.de Signed-off-by: Sven Schmidt <4sschmid@informatik.uni-hamburg.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Rui Salvaterra <rsalvaterra@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David S. Miller <davem@davemloft.net> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 16:01:12 -07:00
MODULE_DESCRIPTION("LZ4 decompressor");
decompressor: add LZ4 decompressor module Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression APIs for kernel are based on LZ4 implementation by Yann Collet. Benchmark Results(PATCH v3) Compiler: Linaro ARM gcc 4.6.2 1. ARMv7, 1.5GHz based board Kernel: linux 3.4 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.7MB 20.1MB/s, 25.2MB/s(UA) LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA) 2. ARMv7, 1.7GHz based board Kernel: linux 3.7 Uncompressed Kernel Size: 14MB Compressed Size Decompression Speed LZO 6.0MB 34.1MB/s, 52.2MB/s(UA) LZ4 6.5MB 86.7MB/s - UA: Unaligned memory Access support - Latest patch set for LZO applied This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a very fast lossless compression algorithm and it also features an extremely fast decoder [1]. But we have five of decompressors already and one question which does arise, however, is that of where do we stop adding new ones? This issue had been discussed and came to the conclusion [2]. Russell King said that we should have: - one decompressor which is the fastest - one decompressor for the highest compression ratio - one popular decompressor (eg conventional gzip) If we have a replacement one for one of these, then it should do exactly that: replace it. The benchmark shows that an 8% increase in image size vs a 66% increase in decompression speed compared to LZO(which has been known as the fastest decompressor in the Kernel). Therefore the "fast but may not be small" compression title has clearly been taken by LZ4 [3]. [1] http://code.google.com/p/lz4/ [2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157 [3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347 LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html LZ4 source repository: http://code.google.com/p/lz4/ Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com> Signed-off-by: Yann Collet <yann.collet.73@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-08 17:01:45 -06:00
#endif