1
0
Fork 0
alistair23-linux/sound/soc/codecs/wm8580.c

1063 lines
28 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* wm8580.c -- WM8580 and WM8581 ALSA Soc Audio driver
*
* Copyright 2008-12 Wolfson Microelectronics PLC.
*
* Notes:
* The WM8580 is a multichannel codec with S/PDIF support, featuring six
* DAC channels and two ADC channels.
*
* The WM8581 is a multichannel codec with S/PDIF support, featuring eight
* DAC channels and two ADC channels.
*
* Currently only the primary audio interface is supported - S/PDIF and
* the secondary audio interfaces are not.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <sound/initval.h>
#include <asm/div64.h>
#include "wm8580.h"
/* WM8580 register space */
#define WM8580_PLLA1 0x00
#define WM8580_PLLA2 0x01
#define WM8580_PLLA3 0x02
#define WM8580_PLLA4 0x03
#define WM8580_PLLB1 0x04
#define WM8580_PLLB2 0x05
#define WM8580_PLLB3 0x06
#define WM8580_PLLB4 0x07
#define WM8580_CLKSEL 0x08
#define WM8580_PAIF1 0x09
#define WM8580_PAIF2 0x0A
#define WM8580_SAIF1 0x0B
#define WM8580_PAIF3 0x0C
#define WM8580_PAIF4 0x0D
#define WM8580_SAIF2 0x0E
#define WM8580_DAC_CONTROL1 0x0F
#define WM8580_DAC_CONTROL2 0x10
#define WM8580_DAC_CONTROL3 0x11
#define WM8580_DAC_CONTROL4 0x12
#define WM8580_DAC_CONTROL5 0x13
#define WM8580_DIGITAL_ATTENUATION_DACL1 0x14
#define WM8580_DIGITAL_ATTENUATION_DACR1 0x15
#define WM8580_DIGITAL_ATTENUATION_DACL2 0x16
#define WM8580_DIGITAL_ATTENUATION_DACR2 0x17
#define WM8580_DIGITAL_ATTENUATION_DACL3 0x18
#define WM8580_DIGITAL_ATTENUATION_DACR3 0x19
#define WM8581_DIGITAL_ATTENUATION_DACL4 0x1A
#define WM8581_DIGITAL_ATTENUATION_DACR4 0x1B
#define WM8580_MASTER_DIGITAL_ATTENUATION 0x1C
#define WM8580_ADC_CONTROL1 0x1D
#define WM8580_SPDTXCHAN0 0x1E
#define WM8580_SPDTXCHAN1 0x1F
#define WM8580_SPDTXCHAN2 0x20
#define WM8580_SPDTXCHAN3 0x21
#define WM8580_SPDTXCHAN4 0x22
#define WM8580_SPDTXCHAN5 0x23
#define WM8580_SPDMODE 0x24
#define WM8580_INTMASK 0x25
#define WM8580_GPO1 0x26
#define WM8580_GPO2 0x27
#define WM8580_GPO3 0x28
#define WM8580_GPO4 0x29
#define WM8580_GPO5 0x2A
#define WM8580_INTSTAT 0x2B
#define WM8580_SPDRXCHAN1 0x2C
#define WM8580_SPDRXCHAN2 0x2D
#define WM8580_SPDRXCHAN3 0x2E
#define WM8580_SPDRXCHAN4 0x2F
#define WM8580_SPDRXCHAN5 0x30
#define WM8580_SPDSTAT 0x31
#define WM8580_PWRDN1 0x32
#define WM8580_PWRDN2 0x33
#define WM8580_READBACK 0x34
#define WM8580_RESET 0x35
#define WM8580_MAX_REGISTER 0x35
#define WM8580_DACOSR 0x40
/* PLLB4 (register 7h) */
#define WM8580_PLLB4_MCLKOUTSRC_MASK 0x60
#define WM8580_PLLB4_MCLKOUTSRC_PLLA 0x20
#define WM8580_PLLB4_MCLKOUTSRC_PLLB 0x40
#define WM8580_PLLB4_MCLKOUTSRC_OSC 0x60
#define WM8580_PLLB4_CLKOUTSRC_MASK 0x180
#define WM8580_PLLB4_CLKOUTSRC_PLLACLK 0x080
#define WM8580_PLLB4_CLKOUTSRC_PLLBCLK 0x100
#define WM8580_PLLB4_CLKOUTSRC_OSCCLK 0x180
/* CLKSEL (register 8h) */
#define WM8580_CLKSEL_DAC_CLKSEL_MASK 0x03
#define WM8580_CLKSEL_DAC_CLKSEL_PLLA 0x01
#define WM8580_CLKSEL_DAC_CLKSEL_PLLB 0x02
/* AIF control 1 (registers 9h-bh) */
#define WM8580_AIF_RATE_MASK 0x7
#define WM8580_AIF_BCLKSEL_MASK 0x18
#define WM8580_AIF_MS 0x20
#define WM8580_AIF_CLKSRC_MASK 0xc0
#define WM8580_AIF_CLKSRC_PLLA 0x40
#define WM8580_AIF_CLKSRC_PLLB 0x40
#define WM8580_AIF_CLKSRC_MCLK 0xc0
/* AIF control 2 (registers ch-eh) */
#define WM8580_AIF_FMT_MASK 0x03
#define WM8580_AIF_FMT_RIGHTJ 0x00
#define WM8580_AIF_FMT_LEFTJ 0x01
#define WM8580_AIF_FMT_I2S 0x02
#define WM8580_AIF_FMT_DSP 0x03
#define WM8580_AIF_LENGTH_MASK 0x0c
#define WM8580_AIF_LENGTH_16 0x00
#define WM8580_AIF_LENGTH_20 0x04
#define WM8580_AIF_LENGTH_24 0x08
#define WM8580_AIF_LENGTH_32 0x0c
#define WM8580_AIF_LRP 0x10
#define WM8580_AIF_BCP 0x20
/* Powerdown Register 1 (register 32h) */
#define WM8580_PWRDN1_PWDN 0x001
#define WM8580_PWRDN1_ALLDACPD 0x040
/* Powerdown Register 2 (register 33h) */
#define WM8580_PWRDN2_OSSCPD 0x001
#define WM8580_PWRDN2_PLLAPD 0x002
#define WM8580_PWRDN2_PLLBPD 0x004
#define WM8580_PWRDN2_SPDIFPD 0x008
#define WM8580_PWRDN2_SPDIFTXD 0x010
#define WM8580_PWRDN2_SPDIFRXD 0x020
#define WM8580_DAC_CONTROL5_MUTEALL 0x10
/*
* wm8580 register cache
* We can't read the WM8580 register space when we
* are using 2 wire for device control, so we cache them instead.
*/
static const struct reg_default wm8580_reg_defaults[] = {
{ 0, 0x0121 },
{ 1, 0x017e },
{ 2, 0x007d },
{ 3, 0x0014 },
{ 4, 0x0121 },
{ 5, 0x017e },
{ 6, 0x007d },
{ 7, 0x0194 },
{ 8, 0x0010 },
{ 9, 0x0002 },
{ 10, 0x0002 },
{ 11, 0x00c2 },
{ 12, 0x0182 },
{ 13, 0x0082 },
{ 14, 0x000a },
{ 15, 0x0024 },
{ 16, 0x0009 },
{ 17, 0x0000 },
{ 18, 0x00ff },
{ 19, 0x0000 },
{ 20, 0x00ff },
{ 21, 0x00ff },
{ 22, 0x00ff },
{ 23, 0x00ff },
{ 24, 0x00ff },
{ 25, 0x00ff },
{ 26, 0x00ff },
{ 27, 0x00ff },
{ 28, 0x01f0 },
{ 29, 0x0040 },
{ 30, 0x0000 },
{ 31, 0x0000 },
{ 32, 0x0000 },
{ 33, 0x0000 },
{ 34, 0x0031 },
{ 35, 0x000b },
{ 36, 0x0039 },
{ 37, 0x0000 },
{ 38, 0x0010 },
{ 39, 0x0032 },
{ 40, 0x0054 },
{ 41, 0x0076 },
{ 42, 0x0098 },
{ 43, 0x0000 },
{ 44, 0x0000 },
{ 45, 0x0000 },
{ 46, 0x0000 },
{ 47, 0x0000 },
{ 48, 0x0000 },
{ 49, 0x0000 },
{ 50, 0x005e },
{ 51, 0x003e },
{ 52, 0x0000 },
};
static bool wm8580_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8580_RESET:
return true;
default:
return false;
}
}
struct pll_state {
unsigned int in;
unsigned int out;
};
#define WM8580_NUM_SUPPLIES 3
static const char *wm8580_supply_names[WM8580_NUM_SUPPLIES] = {
"AVDD",
"DVDD",
"PVDD",
};
struct wm8580_driver_data {
int num_dacs;
};
/* codec private data */
struct wm8580_priv {
struct regmap *regmap;
struct regulator_bulk_data supplies[WM8580_NUM_SUPPLIES];
struct pll_state a;
struct pll_state b;
const struct wm8580_driver_data *drvdata;
int sysclk[2];
};
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
struct wm8580_priv *wm8580 = snd_soc_component_get_drvdata(component);
unsigned int reg = mc->reg;
unsigned int reg2 = mc->rreg;
int ret;
/* Clear the register cache VU so we write without VU set */
regcache_cache_only(wm8580->regmap, true);
regmap_update_bits(wm8580->regmap, reg, 0x100, 0x000);
regmap_update_bits(wm8580->regmap, reg2, 0x100, 0x000);
regcache_cache_only(wm8580->regmap, false);
ret = snd_soc_put_volsw(kcontrol, ucontrol);
if (ret < 0)
return ret;
/* Now write again with the volume update bit set */
snd_soc_component_update_bits(component, reg, 0x100, 0x100);
snd_soc_component_update_bits(component, reg2, 0x100, 0x100);
return 0;
}
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_DOUBLE_R_EXT_TLV("DAC1 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL1,
WM8580_DIGITAL_ATTENUATION_DACR1,
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_DOUBLE_R_EXT_TLV("DAC2 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL2,
WM8580_DIGITAL_ATTENUATION_DACR2,
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_DOUBLE_R_EXT_TLV("DAC3 Playback Volume",
WM8580_DIGITAL_ATTENUATION_DACL3,
WM8580_DIGITAL_ATTENUATION_DACR3,
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_SINGLE("DAC1 Deemphasis Switch", WM8580_DAC_CONTROL3, 0, 1, 0),
SOC_SINGLE("DAC2 Deemphasis Switch", WM8580_DAC_CONTROL3, 1, 1, 0),
SOC_SINGLE("DAC3 Deemphasis Switch", WM8580_DAC_CONTROL3, 2, 1, 0),
SOC_DOUBLE("DAC1 Invert Switch", WM8580_DAC_CONTROL4, 0, 1, 1, 0),
SOC_DOUBLE("DAC2 Invert Switch", WM8580_DAC_CONTROL4, 2, 3, 1, 0),
SOC_DOUBLE("DAC3 Invert Switch", WM8580_DAC_CONTROL4, 4, 5, 1, 0),
SOC_SINGLE("DAC ZC Switch", WM8580_DAC_CONTROL5, 5, 1, 0),
SOC_SINGLE("DAC1 Switch", WM8580_DAC_CONTROL5, 0, 1, 1),
SOC_SINGLE("DAC2 Switch", WM8580_DAC_CONTROL5, 1, 1, 1),
SOC_SINGLE("DAC3 Switch", WM8580_DAC_CONTROL5, 2, 1, 1),
SOC_DOUBLE("Capture Switch", WM8580_ADC_CONTROL1, 0, 1, 1, 1),
SOC_SINGLE("Capture High-Pass Filter Switch", WM8580_ADC_CONTROL1, 4, 1, 0),
};
static const struct snd_kcontrol_new wm8581_snd_controls[] = {
SOC_DOUBLE_R_EXT_TLV("DAC4 Playback Volume",
WM8581_DIGITAL_ATTENUATION_DACL4,
WM8581_DIGITAL_ATTENUATION_DACR4,
0, 0xff, 0, snd_soc_get_volsw, wm8580_out_vu, dac_tlv),
SOC_SINGLE("DAC4 Deemphasis Switch", WM8580_DAC_CONTROL3, 3, 1, 0),
SOC_DOUBLE("DAC4 Invert Switch", WM8580_DAC_CONTROL4, 8, 7, 1, 0),
SOC_SINGLE("DAC4 Switch", WM8580_DAC_CONTROL5, 3, 1, 1),
};
static const struct snd_soc_dapm_widget wm8580_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC1", "Playback", WM8580_PWRDN1, 2, 1),
SND_SOC_DAPM_DAC("DAC2", "Playback", WM8580_PWRDN1, 3, 1),
SND_SOC_DAPM_DAC("DAC3", "Playback", WM8580_PWRDN1, 4, 1),
SND_SOC_DAPM_OUTPUT("VOUT1L"),
SND_SOC_DAPM_OUTPUT("VOUT1R"),
SND_SOC_DAPM_OUTPUT("VOUT2L"),
SND_SOC_DAPM_OUTPUT("VOUT2R"),
SND_SOC_DAPM_OUTPUT("VOUT3L"),
SND_SOC_DAPM_OUTPUT("VOUT3R"),
SND_SOC_DAPM_ADC("ADC", "Capture", WM8580_PWRDN1, 1, 1),
SND_SOC_DAPM_INPUT("AINL"),
SND_SOC_DAPM_INPUT("AINR"),
};
static const struct snd_soc_dapm_widget wm8581_dapm_widgets[] = {
SND_SOC_DAPM_DAC("DAC4", "Playback", WM8580_PWRDN1, 5, 1),
SND_SOC_DAPM_OUTPUT("VOUT4L"),
SND_SOC_DAPM_OUTPUT("VOUT4R"),
};
static const struct snd_soc_dapm_route wm8580_dapm_routes[] = {
{ "VOUT1L", NULL, "DAC1" },
{ "VOUT1R", NULL, "DAC1" },
{ "VOUT2L", NULL, "DAC2" },
{ "VOUT2R", NULL, "DAC2" },
{ "VOUT3L", NULL, "DAC3" },
{ "VOUT3R", NULL, "DAC3" },
{ "ADC", NULL, "AINL" },
{ "ADC", NULL, "AINR" },
};
static const struct snd_soc_dapm_route wm8581_dapm_routes[] = {
{ "VOUT4L", NULL, "DAC4" },
{ "VOUT4R", NULL, "DAC4" },
};
/* PLL divisors */
struct _pll_div {
u32 prescale:1;
u32 postscale:1;
u32 freqmode:2;
u32 n:4;
u32 k:24;
};
/* The size in bits of the pll divide */
#define FIXED_PLL_SIZE (1 << 22)
/* PLL rate to output rate divisions */
static struct {
unsigned int div;
unsigned int freqmode;
unsigned int postscale;
} post_table[] = {
{ 2, 0, 0 },
{ 4, 0, 1 },
{ 4, 1, 0 },
{ 8, 1, 1 },
{ 8, 2, 0 },
{ 16, 2, 1 },
{ 12, 3, 0 },
{ 24, 3, 1 }
};
static int pll_factors(struct _pll_div *pll_div, unsigned int target,
unsigned int source)
{
u64 Kpart;
unsigned int K, Ndiv, Nmod;
int i;
pr_debug("wm8580: PLL %uHz->%uHz\n", source, target);
/* Scale the output frequency up; the PLL should run in the
* region of 90-100MHz.
*/
for (i = 0; i < ARRAY_SIZE(post_table); i++) {
if (target * post_table[i].div >= 90000000 &&
target * post_table[i].div <= 100000000) {
pll_div->freqmode = post_table[i].freqmode;
pll_div->postscale = post_table[i].postscale;
target *= post_table[i].div;
break;
}
}
if (i == ARRAY_SIZE(post_table)) {
printk(KERN_ERR "wm8580: Unable to scale output frequency "
"%u\n", target);
return -EINVAL;
}
Ndiv = target / source;
if (Ndiv < 5) {
source /= 2;
pll_div->prescale = 1;
Ndiv = target / source;
} else
pll_div->prescale = 0;
if ((Ndiv < 5) || (Ndiv > 13)) {
printk(KERN_ERR
"WM8580 N=%u outside supported range\n", Ndiv);
return -EINVAL;
}
pll_div->n = Ndiv;
Nmod = target % source;
Kpart = FIXED_PLL_SIZE * (long long)Nmod;
do_div(Kpart, source);
K = Kpart & 0xFFFFFFFF;
pll_div->k = K;
pr_debug("PLL %x.%x prescale %d freqmode %d postscale %d\n",
pll_div->n, pll_div->k, pll_div->prescale, pll_div->freqmode,
pll_div->postscale);
return 0;
}
static int wm8580_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
int source, unsigned int freq_in, unsigned int freq_out)
{
int offset;
struct snd_soc_component *component = codec_dai->component;
struct wm8580_priv *wm8580 = snd_soc_component_get_drvdata(component);
struct pll_state *state;
struct _pll_div pll_div;
unsigned int reg;
unsigned int pwr_mask;
int ret;
/* GCC isn't able to work out the ifs below for initialising/using
* pll_div so suppress warnings.
*/
memset(&pll_div, 0, sizeof(pll_div));
switch (pll_id) {
case WM8580_PLLA:
state = &wm8580->a;
offset = 0;
pwr_mask = WM8580_PWRDN2_PLLAPD;
break;
case WM8580_PLLB:
state = &wm8580->b;
offset = 4;
pwr_mask = WM8580_PWRDN2_PLLBPD;
break;
default:
return -ENODEV;
}
if (freq_in && freq_out) {
ret = pll_factors(&pll_div, freq_out, freq_in);
if (ret != 0)
return ret;
}
state->in = freq_in;
state->out = freq_out;
/* Always disable the PLL - it is not safe to leave it running
* while reprogramming it.
*/
snd_soc_component_update_bits(component, WM8580_PWRDN2, pwr_mask, pwr_mask);
if (!freq_in || !freq_out)
return 0;
snd_soc_component_write(component, WM8580_PLLA1 + offset, pll_div.k & 0x1ff);
snd_soc_component_write(component, WM8580_PLLA2 + offset, (pll_div.k >> 9) & 0x1ff);
snd_soc_component_write(component, WM8580_PLLA3 + offset,
(pll_div.k >> 18 & 0xf) | (pll_div.n << 4));
reg = snd_soc_component_read32(component, WM8580_PLLA4 + offset);
reg &= ~0x1b;
reg |= pll_div.prescale | pll_div.postscale << 1 |
pll_div.freqmode << 3;
snd_soc_component_write(component, WM8580_PLLA4 + offset, reg);
/* All done, turn it on */
snd_soc_component_update_bits(component, WM8580_PWRDN2, pwr_mask, 0);
return 0;
}
static const int wm8580_sysclk_ratios[] = {
128, 192, 256, 384, 512, 768, 1152,
};
/*
* Set PCM DAI bit size and sample rate.
*/
static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
struct wm8580_priv *wm8580 = snd_soc_component_get_drvdata(component);
u16 paifa = 0;
u16 paifb = 0;
int i, ratio, osr;
/* bit size */
switch (params_width(params)) {
case 16:
paifa |= 0x8;
break;
case 20:
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_20;
break;
case 24:
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_24;
break;
case 32:
paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_32;
break;
default:
return -EINVAL;
}
/* Look up the SYSCLK ratio; accept only exact matches */
ratio = wm8580->sysclk[dai->driver->id] / params_rate(params);
for (i = 0; i < ARRAY_SIZE(wm8580_sysclk_ratios); i++)
if (ratio == wm8580_sysclk_ratios[i])
break;
if (i == ARRAY_SIZE(wm8580_sysclk_ratios)) {
dev_err(component->dev, "Invalid clock ratio %d/%d\n",
wm8580->sysclk[dai->driver->id], params_rate(params));
return -EINVAL;
}
paifa |= i;
dev_dbg(component->dev, "Running at %dfs with %dHz clock\n",
wm8580_sysclk_ratios[i], wm8580->sysclk[dai->driver->id]);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
switch (ratio) {
case 128:
case 192:
osr = WM8580_DACOSR;
dev_dbg(component->dev, "Selecting 64x OSR\n");
break;
default:
osr = 0;
dev_dbg(component->dev, "Selecting 128x OSR\n");
break;
}
snd_soc_component_update_bits(component, WM8580_PAIF3, WM8580_DACOSR, osr);
}
snd_soc_component_update_bits(component, WM8580_PAIF1 + dai->driver->id,
WM8580_AIF_RATE_MASK | WM8580_AIF_BCLKSEL_MASK,
paifa);
snd_soc_component_update_bits(component, WM8580_PAIF3 + dai->driver->id,
WM8580_AIF_LENGTH_MASK, paifb);
return 0;
}
static int wm8580_set_paif_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_component *component = codec_dai->component;
unsigned int aifa;
unsigned int aifb;
int can_invert_lrclk;
aifa = snd_soc_component_read32(component, WM8580_PAIF1 + codec_dai->driver->id);
aifb = snd_soc_component_read32(component, WM8580_PAIF3 + codec_dai->driver->id);
aifb &= ~(WM8580_AIF_FMT_MASK | WM8580_AIF_LRP | WM8580_AIF_BCP);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
aifa &= ~WM8580_AIF_MS;
break;
case SND_SOC_DAIFMT_CBM_CFM:
aifa |= WM8580_AIF_MS;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_I2S;
break;
case SND_SOC_DAIFMT_RIGHT_J:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_RIGHTJ;
break;
case SND_SOC_DAIFMT_LEFT_J:
can_invert_lrclk = 1;
aifb |= WM8580_AIF_FMT_LEFTJ;
break;
case SND_SOC_DAIFMT_DSP_A:
can_invert_lrclk = 0;
aifb |= WM8580_AIF_FMT_DSP;
break;
case SND_SOC_DAIFMT_DSP_B:
can_invert_lrclk = 0;
aifb |= WM8580_AIF_FMT_DSP;
aifb |= WM8580_AIF_LRP;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_IF:
if (!can_invert_lrclk)
return -EINVAL;
aifb |= WM8580_AIF_BCP;
aifb |= WM8580_AIF_LRP;
break;
case SND_SOC_DAIFMT_IB_NF:
aifb |= WM8580_AIF_BCP;
break;
case SND_SOC_DAIFMT_NB_IF:
if (!can_invert_lrclk)
return -EINVAL;
aifb |= WM8580_AIF_LRP;
break;
default:
return -EINVAL;
}
snd_soc_component_write(component, WM8580_PAIF1 + codec_dai->driver->id, aifa);
snd_soc_component_write(component, WM8580_PAIF3 + codec_dai->driver->id, aifb);
return 0;
}
static int wm8580_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
int div_id, int div)
{
struct snd_soc_component *component = codec_dai->component;
unsigned int reg;
switch (div_id) {
case WM8580_MCLK:
reg = snd_soc_component_read32(component, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_MCLKOUTSRC_MASK;
switch (div) {
case WM8580_CLKSRC_MCLK:
/* Input */
break;
case WM8580_CLKSRC_PLLA:
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLA;
break;
case WM8580_CLKSRC_PLLB:
reg |= WM8580_PLLB4_MCLKOUTSRC_PLLB;
break;
case WM8580_CLKSRC_OSC:
reg |= WM8580_PLLB4_MCLKOUTSRC_OSC;
break;
default:
return -EINVAL;
}
snd_soc_component_write(component, WM8580_PLLB4, reg);
break;
case WM8580_CLKOUTSRC:
reg = snd_soc_component_read32(component, WM8580_PLLB4);
reg &= ~WM8580_PLLB4_CLKOUTSRC_MASK;
switch (div) {
case WM8580_CLKSRC_NONE:
break;
case WM8580_CLKSRC_PLLA:
reg |= WM8580_PLLB4_CLKOUTSRC_PLLACLK;
break;
case WM8580_CLKSRC_PLLB:
reg |= WM8580_PLLB4_CLKOUTSRC_PLLBCLK;
break;
case WM8580_CLKSRC_OSC:
reg |= WM8580_PLLB4_CLKOUTSRC_OSCCLK;
break;
default:
return -EINVAL;
}
snd_soc_component_write(component, WM8580_PLLB4, reg);
break;
default:
return -EINVAL;
}
return 0;
}
static int wm8580_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq, int dir)
{
struct snd_soc_component *component = dai->component;
struct wm8580_priv *wm8580 = snd_soc_component_get_drvdata(component);
int ret, sel, sel_mask, sel_shift;
switch (dai->driver->id) {
case WM8580_DAI_PAIFRX:
sel_mask = 0x3;
sel_shift = 0;
break;
case WM8580_DAI_PAIFTX:
sel_mask = 0xc;
sel_shift = 2;
break;
default:
WARN(1, "Unknown DAI driver ID\n");
return -EINVAL;
}
switch (clk_id) {
case WM8580_CLKSRC_ADCMCLK:
if (dai->driver->id != WM8580_DAI_PAIFTX)
return -EINVAL;
sel = 0 << sel_shift;
break;
case WM8580_CLKSRC_PLLA:
sel = 1 << sel_shift;
break;
case WM8580_CLKSRC_PLLB:
sel = 2 << sel_shift;
break;
case WM8580_CLKSRC_MCLK:
sel = 3 << sel_shift;
break;
default:
dev_err(component->dev, "Unknown clock %d\n", clk_id);
return -EINVAL;
}
/* We really should validate PLL settings but not yet */
wm8580->sysclk[dai->driver->id] = freq;
ret = snd_soc_component_update_bits(component, WM8580_CLKSEL, sel_mask, sel);
if (ret < 0)
return ret;
return 0;
}
static int wm8580_digital_mute(struct snd_soc_dai *codec_dai, int mute)
{
struct snd_soc_component *component = codec_dai->component;
unsigned int reg;
reg = snd_soc_component_read32(component, WM8580_DAC_CONTROL5);
if (mute)
reg |= WM8580_DAC_CONTROL5_MUTEALL;
else
reg &= ~WM8580_DAC_CONTROL5_MUTEALL;
snd_soc_component_write(component, WM8580_DAC_CONTROL5, reg);
return 0;
}
static int wm8580_set_bias_level(struct snd_soc_component *component,
enum snd_soc_bias_level level)
{
switch (level) {
case SND_SOC_BIAS_ON:
case SND_SOC_BIAS_PREPARE:
break;
case SND_SOC_BIAS_STANDBY:
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
/* Power up and get individual control of the DACs */
snd_soc_component_update_bits(component, WM8580_PWRDN1,
WM8580_PWRDN1_PWDN |
WM8580_PWRDN1_ALLDACPD, 0);
/* Make VMID high impedance */
snd_soc_component_update_bits(component, WM8580_ADC_CONTROL1,
0x100, 0);
}
break;
case SND_SOC_BIAS_OFF:
snd_soc_component_update_bits(component, WM8580_PWRDN1,
WM8580_PWRDN1_PWDN, WM8580_PWRDN1_PWDN);
break;
}
return 0;
}
static int wm8580_playback_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
struct wm8580_priv *wm8580 = snd_soc_component_get_drvdata(component);
return snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_CHANNELS, 1, wm8580->drvdata->num_dacs * 2);
}
#define WM8580_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops wm8580_dai_ops_playback = {
.startup = wm8580_playback_startup,
.set_sysclk = wm8580_set_sysclk,
.hw_params = wm8580_paif_hw_params,
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
.digital_mute = wm8580_digital_mute,
};
static const struct snd_soc_dai_ops wm8580_dai_ops_capture = {
.set_sysclk = wm8580_set_sysclk,
.hw_params = wm8580_paif_hw_params,
.set_fmt = wm8580_set_paif_dai_fmt,
.set_clkdiv = wm8580_set_dai_clkdiv,
.set_pll = wm8580_set_dai_pll,
};
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:15:21 -06:00
static struct snd_soc_dai_driver wm8580_dai[] = {
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:15:21 -06:00
.name = "wm8580-hifi-playback",
.id = WM8580_DAI_PAIFRX,
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = WM8580_FORMATS,
},
.ops = &wm8580_dai_ops_playback,
},
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:15:21 -06:00
.name = "wm8580-hifi-capture",
.id = WM8580_DAI_PAIFTX,
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = SNDRV_PCM_RATE_8000_192000,
.formats = WM8580_FORMATS,
},
.ops = &wm8580_dai_ops_capture,
},
};
static int wm8580_probe(struct snd_soc_component *component)
{
struct wm8580_priv *wm8580 = snd_soc_component_get_drvdata(component);
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
int ret = 0;
switch (wm8580->drvdata->num_dacs) {
case 4:
snd_soc_add_component_controls(component, wm8581_snd_controls,
ARRAY_SIZE(wm8581_snd_controls));
snd_soc_dapm_new_controls(dapm, wm8581_dapm_widgets,
ARRAY_SIZE(wm8581_dapm_widgets));
snd_soc_dapm_add_routes(dapm, wm8581_dapm_routes,
ARRAY_SIZE(wm8581_dapm_routes));
break;
default:
break;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8580->supplies),
wm8580->supplies);
if (ret != 0) {
dev_err(component->dev, "Failed to enable supplies: %d\n", ret);
goto err_regulator_get;
}
/* Get the codec into a known state */
ret = snd_soc_component_write(component, WM8580_RESET, 0);
if (ret != 0) {
dev_err(component->dev, "Failed to reset component: %d\n", ret);
goto err_regulator_enable;
}
return 0;
err_regulator_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
err_regulator_get:
return ret;
}
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:15:21 -06:00
/* power down chip */
static void wm8580_remove(struct snd_soc_component *component)
{
struct wm8580_priv *wm8580 = snd_soc_component_get_drvdata(component);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:15:21 -06:00
regulator_bulk_disable(ARRAY_SIZE(wm8580->supplies), wm8580->supplies);
}
static const struct snd_soc_component_driver soc_component_dev_wm8580 = {
.probe = wm8580_probe,
.remove = wm8580_remove,
.set_bias_level = wm8580_set_bias_level,
.controls = wm8580_snd_controls,
.num_controls = ARRAY_SIZE(wm8580_snd_controls),
.dapm_widgets = wm8580_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8580_dapm_widgets),
.dapm_routes = wm8580_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(wm8580_dapm_routes),
.idle_bias_on = 1,
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:15:21 -06:00
};
static const struct regmap_config wm8580_regmap = {
.reg_bits = 7,
.val_bits = 9,
.max_register = WM8580_MAX_REGISTER,
.reg_defaults = wm8580_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8580_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = wm8580_volatile,
};
static const struct wm8580_driver_data wm8580_data = {
.num_dacs = 3,
};
static const struct wm8580_driver_data wm8581_data = {
.num_dacs = 4,
};
static const struct of_device_id wm8580_of_match[] = {
{ .compatible = "wlf,wm8580", .data = &wm8580_data },
{ .compatible = "wlf,wm8581", .data = &wm8581_data },
{ },
};
MODULE_DEVICE_TABLE(of, wm8580_of_match);
static int wm8580_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
const struct of_device_id *of_id;
struct wm8580_priv *wm8580;
int ret, i;
wm8580 = devm_kzalloc(&i2c->dev, sizeof(struct wm8580_priv),
GFP_KERNEL);
if (wm8580 == NULL)
return -ENOMEM;
wm8580->regmap = devm_regmap_init_i2c(i2c, &wm8580_regmap);
if (IS_ERR(wm8580->regmap))
return PTR_ERR(wm8580->regmap);
for (i = 0; i < ARRAY_SIZE(wm8580->supplies); i++)
wm8580->supplies[i].supply = wm8580_supply_names[i];
ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8580->supplies),
wm8580->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
i2c_set_clientdata(i2c, wm8580);
of_id = of_match_device(wm8580_of_match, &i2c->dev);
if (of_id)
wm8580->drvdata = of_id->data;
if (!wm8580->drvdata) {
dev_err(&i2c->dev, "failed to find driver data\n");
return -EINVAL;
}
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8580, wm8580_dai, ARRAY_SIZE(wm8580_dai));
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-17 14:15:21 -06:00
return ret;
}
static const struct i2c_device_id wm8580_i2c_id[] = {
{ "wm8580", (kernel_ulong_t)&wm8580_data },
{ "wm8581", (kernel_ulong_t)&wm8581_data },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8580_i2c_id);
static struct i2c_driver wm8580_i2c_driver = {
.driver = {
.name = "wm8580",
.of_match_table = wm8580_of_match,
},
.probe = wm8580_i2c_probe,
.id_table = wm8580_i2c_id,
};
module_i2c_driver(wm8580_i2c_driver);
MODULE_DESCRIPTION("ASoC WM8580 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_AUTHOR("Matt Flax <flatmax@flatmax.org>");
MODULE_LICENSE("GPL");