drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2013 Red Hat
|
|
|
|
* Author: Rob Clark <robdclark@gmail.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
|
|
* the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
|
|
* more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License along with
|
|
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*/
|
|
|
|
|
2017-04-23 22:50:28 -06:00
|
|
|
#include <drm/drm_crtc.h>
|
|
|
|
#include <drm/drm_fb_helper.h>
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
2017-04-23 22:50:28 -06:00
|
|
|
#include "msm_drv.h"
|
2017-06-13 08:22:37 -06:00
|
|
|
#include "msm_kms.h"
|
2014-06-18 14:55:27 -06:00
|
|
|
|
|
|
|
extern int msm_gem_mmap_obj(struct drm_gem_object *obj,
|
|
|
|
struct vm_area_struct *vma);
|
|
|
|
static int msm_fbdev_mmap(struct fb_info *info, struct vm_area_struct *vma);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
/*
|
|
|
|
* fbdev funcs, to implement legacy fbdev interface on top of drm driver
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define to_msm_fbdev(x) container_of(x, struct msm_fbdev, base)
|
|
|
|
|
|
|
|
struct msm_fbdev {
|
|
|
|
struct drm_fb_helper base;
|
|
|
|
struct drm_framebuffer *fb;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct fb_ops msm_fb_ops = {
|
|
|
|
.owner = THIS_MODULE,
|
2016-11-13 16:03:24 -07:00
|
|
|
DRM_FB_HELPER_DEFAULT_OPS,
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
/* Note: to properly handle manual update displays, we wrap the
|
|
|
|
* basic fbdev ops which write to the framebuffer
|
|
|
|
*/
|
2015-07-22 03:28:08 -06:00
|
|
|
.fb_read = drm_fb_helper_sys_read,
|
|
|
|
.fb_write = drm_fb_helper_sys_write,
|
|
|
|
.fb_fillrect = drm_fb_helper_sys_fillrect,
|
|
|
|
.fb_copyarea = drm_fb_helper_sys_copyarea,
|
|
|
|
.fb_imageblit = drm_fb_helper_sys_imageblit,
|
2014-06-18 14:55:27 -06:00
|
|
|
.fb_mmap = msm_fbdev_mmap,
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
};
|
|
|
|
|
2014-06-18 14:55:27 -06:00
|
|
|
static int msm_fbdev_mmap(struct fb_info *info, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
struct drm_fb_helper *helper = (struct drm_fb_helper *)info->par;
|
|
|
|
struct msm_fbdev *fbdev = to_msm_fbdev(helper);
|
2017-07-11 08:13:29 -06:00
|
|
|
struct drm_gem_object *bo = msm_framebuffer_bo(fbdev->fb, 0);
|
2014-06-18 14:55:27 -06:00
|
|
|
int ret = 0;
|
|
|
|
|
2017-07-11 08:13:29 -06:00
|
|
|
ret = drm_gem_mmap_obj(bo, bo->size, vma);
|
2014-06-18 14:55:27 -06:00
|
|
|
if (ret) {
|
|
|
|
pr_err("%s:drm_gem_mmap_obj fail\n", __func__);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2017-07-11 08:13:29 -06:00
|
|
|
return msm_gem_mmap_obj(bo, vma);
|
2014-06-18 14:55:27 -06:00
|
|
|
}
|
|
|
|
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
static int msm_fbdev_create(struct drm_fb_helper *helper,
|
|
|
|
struct drm_fb_helper_surface_size *sizes)
|
|
|
|
{
|
|
|
|
struct msm_fbdev *fbdev = to_msm_fbdev(helper);
|
|
|
|
struct drm_device *dev = helper->dev;
|
2017-06-13 08:22:37 -06:00
|
|
|
struct msm_drm_private *priv = dev->dev_private;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
struct drm_framebuffer *fb = NULL;
|
2017-07-11 08:13:29 -06:00
|
|
|
struct drm_gem_object *bo;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
struct fb_info *fbi = NULL;
|
2016-11-11 10:06:46 -07:00
|
|
|
uint64_t paddr;
|
2017-07-11 08:40:13 -06:00
|
|
|
uint32_t format;
|
|
|
|
int ret, pitch;
|
|
|
|
|
|
|
|
format = drm_mode_legacy_fb_format(sizes->surface_bpp, sizes->surface_depth);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
DBG("create fbdev: %dx%d@%d (%dx%d)", sizes->surface_width,
|
|
|
|
sizes->surface_height, sizes->surface_bpp,
|
|
|
|
sizes->fb_width, sizes->fb_height);
|
|
|
|
|
2017-07-11 08:40:13 -06:00
|
|
|
pitch = align_pitch(sizes->surface_width, sizes->surface_bpp);
|
|
|
|
fb = msm_alloc_stolen_fb(dev, sizes->surface_width,
|
|
|
|
sizes->surface_height, pitch, format);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
if (IS_ERR(fb)) {
|
|
|
|
dev_err(dev->dev, "failed to allocate fb\n");
|
2018-03-28 10:22:16 -06:00
|
|
|
return PTR_ERR(fb);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
}
|
|
|
|
|
2017-07-11 08:13:29 -06:00
|
|
|
bo = msm_framebuffer_bo(fb, 0);
|
|
|
|
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
|
|
|
2014-06-18 14:55:27 -06:00
|
|
|
/*
|
|
|
|
* NOTE: if we can be guaranteed to be able to map buffer
|
|
|
|
* in panic (ie. lock-safe, etc) we could avoid pinning the
|
|
|
|
* buffer now:
|
|
|
|
*/
|
2017-07-11 08:13:29 -06:00
|
|
|
ret = msm_gem_get_iova(bo, priv->kms->aspace, &paddr);
|
2014-06-18 14:55:27 -06:00
|
|
|
if (ret) {
|
|
|
|
dev_err(dev->dev, "failed to get buffer obj iova: %d\n", ret);
|
2014-08-13 19:01:40 -06:00
|
|
|
goto fail_unlock;
|
2014-06-18 14:55:27 -06:00
|
|
|
}
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
2015-07-22 03:28:08 -06:00
|
|
|
fbi = drm_fb_helper_alloc_fbi(helper);
|
|
|
|
if (IS_ERR(fbi)) {
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
dev_err(dev->dev, "failed to allocate fb info\n");
|
2015-07-22 03:28:08 -06:00
|
|
|
ret = PTR_ERR(fbi);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
goto fail_unlock;
|
|
|
|
}
|
|
|
|
|
|
|
|
DBG("fbi=%p, dev=%p", fbi, dev);
|
|
|
|
|
|
|
|
fbdev->fb = fb;
|
|
|
|
helper->fb = fb;
|
|
|
|
|
|
|
|
fbi->par = helper;
|
|
|
|
fbi->fbops = &msm_fb_ops;
|
|
|
|
|
|
|
|
strcpy(fbi->fix.id, "msm");
|
|
|
|
|
2016-12-14 14:31:35 -07:00
|
|
|
drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->format->depth);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height);
|
|
|
|
|
|
|
|
dev->mode_config.fb_base = paddr;
|
|
|
|
|
2017-07-11 08:13:29 -06:00
|
|
|
fbi->screen_base = msm_gem_get_vaddr(bo);
|
2016-05-24 16:29:38 -06:00
|
|
|
if (IS_ERR(fbi->screen_base)) {
|
|
|
|
ret = PTR_ERR(fbi->screen_base);
|
|
|
|
goto fail_unlock;
|
|
|
|
}
|
2017-07-11 08:13:29 -06:00
|
|
|
fbi->screen_size = bo->size;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
fbi->fix.smem_start = paddr;
|
2017-07-11 08:13:29 -06:00
|
|
|
fbi->fix.smem_len = bo->size;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
DBG("par=%p, %dx%d", fbi->par, fbi->var.xres, fbi->var.yres);
|
|
|
|
DBG("allocated %dx%d fb", fbdev->fb->width, fbdev->fb->height);
|
|
|
|
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
fail_unlock:
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
2018-03-28 10:22:16 -06:00
|
|
|
drm_framebuffer_remove(fb);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-06-27 09:19:23 -06:00
|
|
|
static const struct drm_fb_helper_funcs msm_fb_helper_funcs = {
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
.fb_probe = msm_fbdev_create,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* initialize fbdev helper */
|
|
|
|
struct drm_fb_helper *msm_fbdev_init(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct msm_drm_private *priv = dev->dev_private;
|
|
|
|
struct msm_fbdev *fbdev = NULL;
|
|
|
|
struct drm_fb_helper *helper;
|
2014-06-18 14:55:27 -06:00
|
|
|
int ret;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
|
|
|
|
if (!fbdev)
|
|
|
|
goto fail;
|
|
|
|
|
|
|
|
helper = &fbdev->base;
|
|
|
|
|
2014-06-27 09:19:24 -06:00
|
|
|
drm_fb_helper_prepare(dev, helper, &msm_fb_helper_funcs);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
drm: Rely on mode_config data for fb_helper initialization
Instead of receiving the num_crts as a parameter, we can read it
directly from the mode_config structure. I audited the drivers that
invoke this helper and I believe all of them initialize the mode_config
struct accordingly, prior to calling the fb_helper.
I used the following coccinelle hack to make this transformation, except
for the function headers and comment updates. The first and second
rules are split because I couldn't find a way to remove the unused
temporary variables at the same time I removed the parameter.
// <smpl>
@r@
expression A,B,D,E;
identifier C;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
expression A,B,C,D,E;
@@
(
- drm_fb_helper_init(A,B,C,D)
+ drm_fb_helper_init(A,B,D)
|
- drm_fbdev_cma_init_with_funcs(A,B,C,D,E)
+ drm_fbdev_cma_init_with_funcs(A,B,D,E)
|
- drm_fbdev_cma_init(A,B,C,D)
+ drm_fbdev_cma_init(A,B,D)
)
@@
identifier r.C;
type T;
expression V;
@@
- T C;
<...
when != C
- C = V;
...>
// </smpl>
Changes since v1:
- Rebased on top of the tip of drm-misc-next.
- Remove mention to sti since a proper fix got merged.
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-02-02 09:26:40 -07:00
|
|
|
ret = drm_fb_helper_init(dev, helper, priv->num_connectors);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
if (ret) {
|
|
|
|
dev_err(dev->dev, "could not init fbdev: ret=%d\n", ret);
|
|
|
|
goto fail;
|
|
|
|
}
|
|
|
|
|
2014-12-19 03:21:32 -07:00
|
|
|
ret = drm_fb_helper_single_add_all_connectors(helper);
|
|
|
|
if (ret)
|
|
|
|
goto fini;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
2014-12-19 03:21:32 -07:00
|
|
|
ret = drm_fb_helper_initial_config(helper, 32);
|
|
|
|
if (ret)
|
|
|
|
goto fini;
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
priv->fbdev = helper;
|
|
|
|
|
|
|
|
return helper;
|
|
|
|
|
2014-12-19 03:21:32 -07:00
|
|
|
fini:
|
|
|
|
drm_fb_helper_fini(helper);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
fail:
|
|
|
|
kfree(fbdev);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
void msm_fbdev_free(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct msm_drm_private *priv = dev->dev_private;
|
|
|
|
struct drm_fb_helper *helper = priv->fbdev;
|
|
|
|
struct msm_fbdev *fbdev;
|
|
|
|
|
|
|
|
DBG();
|
|
|
|
|
2015-07-22 03:28:08 -06:00
|
|
|
drm_fb_helper_unregister_fbi(helper);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
|
|
|
|
drm_fb_helper_fini(helper);
|
|
|
|
|
|
|
|
fbdev = to_msm_fbdev(priv->fbdev);
|
|
|
|
|
|
|
|
/* this will free the backing object */
|
|
|
|
if (fbdev->fb) {
|
2017-07-11 08:13:29 -06:00
|
|
|
struct drm_gem_object *bo =
|
|
|
|
msm_framebuffer_bo(fbdev->fb, 0);
|
|
|
|
msm_gem_put_vaddr(bo);
|
drm/msm: basic KMS driver for snapdragon
The snapdragon chips have multiple different display controllers,
depending on which chip variant/version. (As far as I can tell, current
devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And
then external to the display controller are HDMI, DSI, etc. blocks which
may be shared across devices which have different display controller
blocks.
To more easily add support for different display controller blocks, the
display controller specific bits are split out into a "kms" module,
which provides the kms plane/crtc/encoder objects.
The external HDMI, DSI, etc. blocks are part encoder, and part connector
currently. But I think I will pull in the drm_bridge patches from
chromeos tree, and split them into a bridge+connector, with the
registers that need to be set in modeset handled by the bridge. This
would remove the 'msm_connector' base class. But some things need to be
double checked to make sure I could get the correct ON/OFF sequencing..
This patch adds support for mdp4 crtc (including hw cursor), dtv encoder
(part of MDP4 block), and hdmi.
Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
|
|
|
drm_framebuffer_remove(fbdev->fb);
|
|
|
|
}
|
|
|
|
|
|
|
|
kfree(fbdev);
|
|
|
|
|
|
|
|
priv->fbdev = NULL;
|
|
|
|
}
|