1
0
Fork 0
alistair23-linux/drivers/platform/x86/asus-wmi.h

80 lines
2.1 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Asus PC WMI hotkey driver
*
* Copyright(C) 2010 Intel Corporation.
* Copyright(C) 2010-2011 Corentin Chary <corentin.chary@gmail.com>
*
* Portions based on wistron_btns.c:
* Copyright (C) 2005 Miloslav Trmac <mitr@volny.cz>
* Copyright (C) 2005 Bernhard Rosenkraenzer <bero@arklinux.org>
* Copyright (C) 2005 Dmitry Torokhov <dtor@mail.ru>
*/
#ifndef _ASUS_WMI_H_
#define _ASUS_WMI_H_
#include <linux/platform_device.h>
#include <linux/i8042.h>
#define ASUS_WMI_KEY_IGNORE (-1)
#define ASUS_WMI_BRN_DOWN 0x20
#define ASUS_WMI_BRN_UP 0x2f
struct module;
struct key_entry;
struct asus_wmi;
struct quirk_entry {
bool hotplug_wireless;
bool scalar_panel_brightness;
bool store_backlight_power;
bool wmi_backlight_power;
bool wmi_backlight_native;
bool wmi_backlight_set_devstate;
bool wmi_force_als_set;
int wapf;
/*
* For machines with AMD graphic chips, it will send out WMI event
* and ACPI interrupt at the same time while hitting the hotkey.
* To simplify the problem, we just have to ignore the WMI event,
* and let the ACPI interrupt to send out the key event.
*/
int no_display_toggle;
platform/x86: asus-wmi: Set specified XUSB2PR value for X550LB The bluetooth adapter Atheros AR3012 can't be enumerated and make the bluetooth function broken. T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb The error is: usb 2-6: device not accepting address 7, error -62 usb usb2-port6: unable to enumerate USB device It is caused by adapter's connected port is mapped to xHC controller, but the xHCI is not supported by the usb device. The output of 'sudo lspci -nnxxx -s 00:14.0': 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) 00: 86 80 31 9c 06 04 90 02 04 30 03 0c 00 00 00 00 10: 04 00 a0 f7 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 1f 20 30: 00 00 00 00 70 00 00 00 00 00 00 00 0b 01 00 00 40: fd 01 36 80 89 c6 0f 80 00 00 00 00 00 00 00 00 50: 5f 2e ce 0f 00 00 00 00 00 00 00 00 00 00 00 00 60: 30 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 01 80 c2 c1 08 00 00 00 00 00 00 00 00 00 00 00 80: 05 00 87 00 0c a0 e0 fe 00 00 00 00 a1 41 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 01 04 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 0f 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 03 c0 30 00 00 00 00 00 03 0c 00 00 00 00 00 00 d0: f9 01 00 00 f9 01 00 00 0f 00 00 00 0f 00 00 00 e0: 00 08 00 00 00 00 00 00 00 00 00 00 d8 d8 00 00 f0: 00 00 00 00 00 00 00 00 b1 0f 04 08 00 00 00 00 By referencing Intel Platform Controller Hub(PCH) datasheet, the xHC USB 2.0 Port Routing(XUSB2PR) at offset 0xD0-0xD3h decides the setting of mapping the port to EHCI controller or xHC controller. And the port mapped to xHC will enable xHCI during bus resume. The setting of disabling bluetooth adapter's connected port is 0x000001D9. The value can be obtained by few times 1 bit flip operation. The suited configuration should have the 'lsusb -t' result with bluetooth using ehci: /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/9p, 480M |__ Port 5: Dev 2, If 0, Class=Video, Driver=uvcvideo, 480M |__ Port 5: Dev 2, If 1, Class=Video, Driver=uvcvideo, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M |__ Port 6: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M |__ Port 6: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M Signed-off-by: Kai-Chuan Hsieh <kai.chiuan@gmail.com> Acked-by: Corentin Chary <corentin.chary@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> [andy: resolve merge conflict in asus-wmi.h] Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-09-01 09:55:55 -06:00
u32 xusb2pr;
bool (*i8042_filter)(unsigned char data, unsigned char str,
struct serio *serio);
};
struct asus_wmi_driver {
int brightness;
int panel_power;
asus-wmi: record wlan status while controlled by userapp If the user bit is set, that mean BIOS can't set and record the wlan status, it will report the value read from id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while we query the wlan status by id ASUS_WMI_DEVID_WLAN (0x00010011) through WMI. So, we have to record wlan status in id ASUS_WMI_DEVID_WLAN_LED (0x00010012) while setting the wlan status through WMI. This is also the behavior that windows app will do. Quote from ASUS application engineer === When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return (1) 0x00050001 (On) (2) 0x00050000 (Off) (3) 0x00030001 (On) (4) 0x00030000 (Off) (5) 0x00000002 (Unknown) (1), (2) means that the model has hardware GPIO for WLAN, you can call WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off. (3), (4) means that the model doesn’t have hardware GPIO, you need to use API or driver library to turn WLAN on/off, and call WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status. After you set WLAN LED status, you can see the WLAN status is changed with WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly (ex: Windows), you can use it for synchronization. (5) means that the model doesn’t have WLAN device. WLAN is the ONLY special case with upper rule. For other device, like Bluetooth, you just need use WMIMethod(DSTS, 0x00010013) to get, and WMIMethod(DEVS, 0x00010013, 1 or 0) to set. === Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-07-26 03:13:31 -06:00
int wlan_ctrl_by_user;
const char *name;
struct module *owner;
const char *event_guid;
const struct key_entry *keymap;
const char *input_name;
const char *input_phys;
struct quirk_entry *quirks;
/* Returns new code, value, and autorelease values in arguments.
* Return ASUS_WMI_KEY_IGNORE in code if event should be ignored. */
void (*key_filter) (struct asus_wmi_driver *driver, int *code,
unsigned int *value, bool *autorelease);
int (*probe) (struct platform_device *device);
void (*detect_quirks) (struct asus_wmi_driver *driver);
struct platform_driver platform_driver;
struct platform_device *platform_device;
};
int asus_wmi_register_driver(struct asus_wmi_driver *driver);
void asus_wmi_unregister_driver(struct asus_wmi_driver *driver);
#endif /* !_ASUS_WMI_H_ */