redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/fs/overlayfs/overlayfs.h

379 lines
13 KiB
C
Raw Normal View History

overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
/*
*
* Copyright (C) 2011 Novell Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/kernel.h>
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
#include <linux/uuid.h>
ovl: move include of ovl_entry.h into overlayfs.h Most overlayfs c files already explicitly include ovl_entry.h to use overlay entry struct definitions and upcoming changes are going to require even more c files to include this header. All overlayfs c files include overlayfs.h and overlayfs.h itself refers to some structs defined in ovl_entry.h, so it seems more logic to include ovl_entry.h from overlayfs.h than from c files. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-10-30 05:33:11 -06:00
#include "ovl_entry.h"
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
enum ovl_path_type {
ovl: get rid of PURE type The remainging uses of __OVL_PATH_PURE can be replaced by ovl_dentry_is_opaque(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
__OVL_PATH_UPPER = (1 << 0),
__OVL_PATH_MERGE = (1 << 1),
ovl: set the ORIGIN type flag For directory entries, non zero oe->numlower implies OVL_TYPE_MERGE. Define a new type flag OVL_TYPE_ORIGIN to indicate that an entry holds a reference to its lower copy up origin. For directory entries ORIGIN := MERGE && UPPER. For non-dir entries ORIGIN means that a lower type dentry has been recently copied up or that we were able to find the copy up origin from overlay.origin xattr. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-04-23 14:12:34 -06:00
__OVL_PATH_ORIGIN = (1 << 2),
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
};
ovl: make path-type a bitmap OVL_PATH_PURE_UPPER -> __OVL_PATH_UPPER | __OVL_PATH_PURE OVL_PATH_UPPER -> __OVL_PATH_UPPER OVL_PATH_MERGE -> __OVL_PATH_UPPER | __OVL_PATH_MERGE OVL_PATH_LOWER -> 0 Multiple R/O layers will allow __OVL_PATH_MERGE without __OVL_PATH_UPPER. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12 16:59:42 -07:00
#define OVL_TYPE_UPPER(type) ((type) & __OVL_PATH_UPPER)
#define OVL_TYPE_MERGE(type) ((type) & __OVL_PATH_MERGE)
ovl: set the ORIGIN type flag For directory entries, non zero oe->numlower implies OVL_TYPE_MERGE. Define a new type flag OVL_TYPE_ORIGIN to indicate that an entry holds a reference to its lower copy up origin. For directory entries ORIGIN := MERGE && UPPER. For non-dir entries ORIGIN means that a lower type dentry has been recently copied up or that we were able to find the copy up origin from overlay.origin xattr. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-04-23 14:12:34 -06:00
#define OVL_TYPE_ORIGIN(type) ((type) & __OVL_PATH_ORIGIN)
ovl: fix POSIX ACL setting Setting POSIX ACL needs special handling: 1) Some permission checks are done by ->setxattr() which now uses mounter's creds ("ovl: do operations on underlying file system in mounter's context"). These permission checks need to be done with current cred as well. 2) Setting ACL can fail for various reasons. We do not need to copy up in these cases. In the mean time switch to using generic_setxattr. [Arnd Bergmann] Fix link error without POSIX ACL. posix_acl_from_xattr() doesn't have a 'static inline' implementation when CONFIG_FS_POSIX_ACL is disabled, and I could not come up with an obvious way to do it. This instead avoids the link error by defining two sets of ACL operations and letting the compiler drop one of the two at compile time depending on CONFIG_FS_POSIX_ACL. This avoids all references to the ACL code, also leading to smaller code. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:24 -06:00
ovl: Fix OVL_XATTR_PREFIX Make sure ovl_own_xattr_handler only matches attribute names starting with "overlay.", not "overlayXXX". Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-22 09:59:22 -06:00
#define OVL_XATTR_PREFIX XATTR_TRUSTED_PREFIX "overlay."
#define OVL_XATTR_OPAQUE OVL_XATTR_PREFIX "opaque"
ovl: lookup redirects If a directory has the "trusted.overlay.redirect" xattr, it means that the value of the xattr should be used to find the underlying directory on the next lower layer. The redirect may be relative or absolute. Absolute redirects begin with a slash. A relative redirect means: instead of the current dentry's name use the value of the redirect to find the directory in the next lower layer. Relative redirects must not contain a slash. An absolute redirect means: look up the directory relative to the root of the overlay using the value of the redirect in the next lower layer. Redirects work on lower layers as well. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
#define OVL_XATTR_REDIRECT OVL_XATTR_PREFIX "redirect"
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
#define OVL_XATTR_ORIGIN OVL_XATTR_PREFIX "origin"
ovl: mark upper dir with type origin entries "impure" When moving a merge dir or non-dir with copy up origin into a non-merge upper dir (a.k.a pure upper dir), we are marking the target parent dir "impure". ovl_iterate() iterates pure upper dirs directly, because there is no need to filter out whiteouts and merge dir content with lower dir. But for the case of an "impure" upper dir, ovl_iterate() will not be able to iterate the real upper dir directly, because it will need to lookup the origin inode and use it to fill d_ino. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-11 07:42:26 -06:00
#define OVL_XATTR_IMPURE OVL_XATTR_PREFIX "impure"
ovl: persistent overlay inode nlink for indexed inodes With inodes index enabled, an overlay inode nlink counts the union of upper and non-covered lower hardlinks. During the lifetime of a non-pure upper inode, the following nlink modifying operations can happen: 1. Lower hardlink copy up 2. Upper hardlink created, unlinked or renamed over 3. Lower hardlink whiteout or renamed over For the first, copy up case, the union nlink does not change, whether the operation succeeds or fails, but the upper inode nlink may change. Therefore, before copy up, we store the union nlink value relative to the lower inode nlink in the index inode xattr trusted.overlay.nlink. For the second, upper hardlink case, the union nlink should be incremented or decremented IFF the operation succeeds, aligned with nlink change of the upper inode. Therefore, before link/unlink/rename, we store the union nlink value relative to the upper inode nlink in the index inode. For the last, lower cover up case, we simplify things by preceding the whiteout or cover up with copy up. This makes sure that there is an index upper inode where the nlink xattr can be stored before the copied up upper entry is unlink. Return the overlay inode nlinks for indexed upper inodes on stat(2). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-20 06:35:14 -06:00
#define OVL_XATTR_NLINK OVL_XATTR_PREFIX "nlink"
ovl: use directory index entries for consistency verification A directory index is a directory type entry in index dir with a "trusted.overlay.upper" xattr containing an encoded ovl_fh of the merge directory upper dir inode. On lookup of non-dir files, lower file is followed by origin file handle. On lookup of dir entries, lower dir is found by name and then compared to origin file handle. We only trust dir index if we verified that lower dir matches origin file handle, otherwise index may be inconsistent and we ignore it. If we find an indexed non-upper dir or an indexed merged dir, whose index 'upper' xattr points to a different upper dir, that means that the lower directory may be also referenced by another upper dir via redirect, so we fail the lookup on inconsistency error. To be consistent with directory index entries format, the association of index dir to upper root dir, that was stored by older kernels in "trusted.overlay.origin" xattr is now stored in "trusted.overlay.upper" xattr. This also serves as an indication that overlay was mounted with a kernel that support index directory entries. For backward compatibility, if an 'origin' xattr exists on the index dir we also verify it on mount. Directory index entries are going to be used for NFS export. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-11 01:47:03 -07:00
#define OVL_XATTR_UPPER OVL_XATTR_PREFIX "upper"
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
ovl: store 'has_upper' and 'opaque' as bit flags We need to make some room in struct ovl_entry to store information about redirected ancestors for NFS export, so cram two booleans as bit flags. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-14 10:25:31 -07:00
enum ovl_inode_flag {
ovl: no direct iteration for dir with origin xattr If a non-merge dir in an overlay mount has an overlay.origin xattr, it means it was once an upper merge dir, which may contain whiteouts and then the lower dir was removed under it. Do not iterate real dir directly in this case to avoid exposing whiteouts. [SzM] Set OVL_WHITEOUT for all merge directories as well. [amir] A directory that was just copied up does not have the OVL_WHITEOUTS flag. We need to set it to fix merge dir iteration. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-25 07:37:17 -06:00
/* Pure upper dir that may contain non pure upper entries */
ovl: move impure to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
OVL_IMPURE,
ovl: no direct iteration for dir with origin xattr If a non-merge dir in an overlay mount has an overlay.origin xattr, it means it was once an upper merge dir, which may contain whiteouts and then the lower dir was removed under it. Do not iterate real dir directly in this case to avoid exposing whiteouts. [SzM] Set OVL_WHITEOUT for all merge directories as well. [amir] A directory that was just copied up does not have the OVL_WHITEOUTS flag. We need to set it to fix merge dir iteration. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-25 07:37:17 -06:00
/* Non-merge dir that may contain whiteout entries */
OVL_WHITEOUTS,
ovl: lookup index entry for copy up origin When inodes index feature is enabled, lookup in indexdir for the index entry of lower real inode or copy up origin inode. The index entry name is the hex representation of the lower inode file handle. If the index dentry in negative, then either no lower aliases have been copied up yet, or aliases have been copied up in older kernels and are not indexed. If the index dentry for a copy up origin inode is positive, but points to an inode different than the upper inode, then either the upper inode has been copied up and not indexed or it was indexed, but since then index dir was cleared. Either way, that index cannot be used to indentify the overlay inode. If a positive dentry that matches the upper inode was found, then it is safe to use the copy up origin st_ino for upper hardlinks, because all indexed upper hardlinks are represented by the same overlay inode as the copy up origin. Set the INDEX type flag on an indexed upper dentry. A non-upper dentry may also have a positive index from copy up of another lower hardlink. This situation will be handled by following patches. Index lookup is going to be used to prevent breaking hardlinks on copy up. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-21 06:28:41 -06:00
OVL_INDEX,
ovl: move impure to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
};
ovl: store 'has_upper' and 'opaque' as bit flags We need to make some room in struct ovl_entry to store information about redirected ancestors for NFS export, so cram two booleans as bit flags. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-14 10:25:31 -07:00
enum ovl_entry_flag {
OVL_E_UPPER_ALIAS,
OVL_E_OPAQUE,
ovl: check lower ancestry on encode of lower dir file handle This change relaxes copy up on encode of merge dir with lower layer > 1 and handles the case of encoding a merge dir with lower layer 1, where an ancestor is a non-indexed merge dir. In that case, decode of the lower file handle will not have been possible if the non-indexed ancestor is redirected before or after encode. Before encoding a non-upper directory file handle from real layer N, we need to check if it will be possible to reconnect an overlay dentry from the real lower decoded dentry. This is done by following the overlay ancestry up to a "layer N connected" ancestor and verifying that all parents along the way are "layer N connectable". If an ancestor that is NOT "layer N connectable" is found, we need to copy up an ancestor, which is "layer N connectable", thus making that ancestor "layer N connected". For example: layer 1: /a layer 2: /a/b/c The overlay dentry /a is NOT "layer 2 connectable", because if dir /a is copied up and renamed, upper dir /a will be indexed by lower dir /a from layer 1. The dir /a from layer 2 will never be indexed, so the algorithm in ovl_lookup_real_ancestor() (*) will not be able to lookup a connected overlay dentry from the connected lower dentry /a/b/c. To avoid this problem on decode time, we need to copy up an ancestor of /a/b/c, which is "layer 2 connectable", on encode time. That ancestor is /a/b. After copy up (and index) of /a/b, it will become "layer 2 connected" and when the time comes to decode the file handle from lower dentry /a/b/c, ovl_lookup_real_ancestor() will find the indexed ancestor /a/b and decoding a connected overlay dentry will be accomplished. (*) the algorithm in ovl_lookup_real_ancestor() can be improved to lookup an entry /a in the lower layers above layer N and find the indexed dir /a from layer 1. If that improvement is made, then the check for "layer N connected" will need to verify there are no redirects in lower layers above layer N. In the example above, /a will be "layer 2 connectable". However, if layer 2 dir /a is a target of a layer 1 redirect, then /a will NOT be "layer 2 connectable": layer 1: /A (redirect = /a) layer 2: /a/b/c Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-30 04:31:09 -07:00
OVL_E_CONNECTED,
ovl: store 'has_upper' and 'opaque' as bit flags We need to make some room in struct ovl_entry to store information about redirected ancestors for NFS export, so cram two booleans as bit flags. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-14 10:25:31 -07:00
};
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
/*
* The tuple (fh,uuid) is a universal unique identifier for a copy up origin,
* where:
* origin.fh - exported file handle of the lower file
* origin.uuid - uuid of the lower filesystem
*/
#define OVL_FH_VERSION 0
#define OVL_FH_MAGIC 0xfb
/* CPU byte order required for fid decoding: */
#define OVL_FH_FLAG_BIG_ENDIAN (1 << 0)
#define OVL_FH_FLAG_ANY_ENDIAN (1 << 1)
ovl: verify index dir matches upper dir An index dir contains persistent hardlinks to files in upper dir. Therefore, we must never mount an existing index dir with a differnt upper dir. Store the upper root dir file handle in index dir inode when index dir is created and verify the file handle before using an existing index dir on mount. Add an 'is_upper' flag to the overlay file handle encoding and set it when encoding the upper root file handle. This is not critical for index dir verification, but it is good practice towards a standard overlayfs file handle format for NFS export. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-21 06:28:38 -06:00
/* Is the real inode encoded in fid an upper inode? */
#define OVL_FH_FLAG_PATH_UPPER (1 << 2)
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
ovl: fix origin verification of index dir Commit 54fb347e836f ("ovl: verify index dir matches upper dir") introduced a new ovl_fh flag OVL_FH_FLAG_PATH_UPPER to indicate an upper file handle, but forgot to add the flag to the mask of valid flags, so index dir origin verification always discards existing origin and stores a new one. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-11 06:58:36 -06:00
#define OVL_FH_FLAG_ALL (OVL_FH_FLAG_BIG_ENDIAN | OVL_FH_FLAG_ANY_ENDIAN | \
OVL_FH_FLAG_PATH_UPPER)
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
#if defined(__LITTLE_ENDIAN)
#define OVL_FH_FLAG_CPU_ENDIAN 0
#elif defined(__BIG_ENDIAN)
#define OVL_FH_FLAG_CPU_ENDIAN OVL_FH_FLAG_BIG_ENDIAN
#else
#error Endianness not defined
#endif
ovl: encode pure upper file handles Encode overlay file handles as struct ovl_fh containing the file handle encoding of the real upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-12 05:17:16 -06:00
/* The type returned by overlay exportfs ops when encoding an ovl_fh handle */
#define OVL_FILEID 0xfb
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
/* On-disk and in-memeory format for redirect by file handle */
struct ovl_fh {
u8 version; /* 0 */
u8 magic; /* 0xfb */
u8 len; /* size of this header + size of fid */
u8 flags; /* OVL_FH_FLAG_* */
u8 type; /* fid_type of fid */
overlayfs: use uuid_t instead of uuid_be Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-05-17 01:32:50 -06:00
uuid_t uuid; /* uuid of filesystem */
ovl: store file handle of lower inode on copy up Sometimes it is interesting to know if an upper file is pure upper or a copy up target, and if it is a copy up target, it may be interesting to find the copy up origin. This will be used to preserve lower inode numbers across copy up. Store the lower inode file handle in upper inode extended attribute overlay.origin on copy up to use it later for these cases. Store the lower filesystem uuid along side the file handle, so we can validate that we are looking for the origin file in the original fs. If lower fs does not support NFS export ops store a zero sized xattr so we can always use the overlay.origin xattr to distinguish between a copy up and a pure upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-30 06:22:16 -06:00
u8 fid[0]; /* file identifier */
} __packed;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
static inline int ovl_do_rmdir(struct inode *dir, struct dentry *dentry)
{
int err = vfs_rmdir(dir, dentry);
pr_debug("rmdir(%pd2) = %i\n", dentry, err);
return err;
}
static inline int ovl_do_unlink(struct inode *dir, struct dentry *dentry)
{
int err = vfs_unlink(dir, dentry, NULL);
pr_debug("unlink(%pd2) = %i\n", dentry, err);
return err;
}
static inline int ovl_do_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *new_dentry, bool debug)
{
int err = vfs_link(old_dentry, dir, new_dentry, NULL);
if (debug) {
pr_debug("link(%pd2, %pd2) = %i\n",
old_dentry, new_dentry, err);
}
return err;
}
static inline int ovl_do_create(struct inode *dir, struct dentry *dentry,
umode_t mode, bool debug)
{
int err = vfs_create(dir, dentry, mode, true);
if (debug)
pr_debug("create(%pd2, 0%o) = %i\n", dentry, mode, err);
return err;
}
static inline int ovl_do_mkdir(struct inode *dir, struct dentry *dentry,
umode_t mode, bool debug)
{
int err = vfs_mkdir(dir, dentry, mode);
if (debug)
pr_debug("mkdir(%pd2, 0%o) = %i\n", dentry, mode, err);
return err;
}
static inline int ovl_do_mknod(struct inode *dir, struct dentry *dentry,
umode_t mode, dev_t dev, bool debug)
{
int err = vfs_mknod(dir, dentry, mode, dev);
if (debug) {
pr_debug("mknod(%pd2, 0%o, 0%o) = %i\n",
dentry, mode, dev, err);
}
return err;
}
static inline int ovl_do_symlink(struct inode *dir, struct dentry *dentry,
const char *oldname, bool debug)
{
int err = vfs_symlink(dir, dentry, oldname);
if (debug)
pr_debug("symlink(\"%s\", %pd2) = %i\n", oldname, dentry, err);
return err;
}
static inline int ovl_do_setxattr(struct dentry *dentry, const char *name,
const void *value, size_t size, int flags)
{
int err = vfs_setxattr(dentry, name, value, size, flags);
pr_debug("setxattr(%pd2, \"%s\", \"%*s\", 0x%x) = %i\n",
dentry, name, (int) size, (char *) value, flags, err);
return err;
}
static inline int ovl_do_removexattr(struct dentry *dentry, const char *name)
{
int err = vfs_removexattr(dentry, name);
pr_debug("removexattr(%pd2, \"%s\") = %i\n", dentry, name, err);
return err;
}
static inline int ovl_do_rename(struct inode *olddir, struct dentry *olddentry,
struct inode *newdir, struct dentry *newdentry,
unsigned int flags)
{
int err;
fs: rename "rename2" i_op to "rename" Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27 03:03:58 -06:00
pr_debug("rename(%pd2, %pd2, 0x%x)\n",
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
olddentry, newdentry, flags);
err = vfs_rename(olddir, olddentry, newdir, newdentry, NULL, flags);
if (err) {
fs: rename "rename2" i_op to "rename" Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27 03:03:58 -06:00
pr_debug("...rename(%pd2, %pd2, ...) = %i\n",
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
olddentry, newdentry, err);
}
return err;
}
static inline int ovl_do_whiteout(struct inode *dir, struct dentry *dentry)
{
int err = vfs_whiteout(dir, dentry);
pr_debug("whiteout(%pd2) = %i\n", dentry, err);
return err;
}
ovl: check if upperdir fs supports O_TMPFILE This is needed for choosing between concurrent copyup using O_TMPFILE and legacy copyup using workdir+rename. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-16 21:34:53 -07:00
static inline struct dentry *ovl_do_tmpfile(struct dentry *dentry, umode_t mode)
{
struct dentry *ret = vfs_tmpfile(dentry, mode, 0);
ovl: Use PTR_ERR_OR_ZERO() Fix ptr_ret.cocci warnings: fs/overlayfs/overlayfs.h:179:11-17: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-11-27 16:09:23 -07:00
int err = PTR_ERR_OR_ZERO(ret);
ovl: check if upperdir fs supports O_TMPFILE This is needed for choosing between concurrent copyup using O_TMPFILE and legacy copyup using workdir+rename. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-16 21:34:53 -07:00
pr_debug("tmpfile(%pd2, 0%o) = %i\n", dentry, mode, err);
return ret;
}
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
/* util.c */
int ovl_want_write(struct dentry *dentry);
void ovl_drop_write(struct dentry *dentry);
struct dentry *ovl_workdir(struct dentry *dentry);
const struct cred *ovl_override_creds(struct super_block *sb);
ovl: check if all layers are on the same fs Some features can only work when all layers are on the same fs. Test this condition during mount time, so features can check them later. Add helper ovl_same_sb() to return the common super block in case all layers are on the same fs. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-22 06:42:21 -06:00
struct super_block *ovl_same_sb(struct super_block *sb);
ovl: constant st_ino for non-samefs with xino On 64bit systems, when overlay layers are not all on the same fs, but all inode numbers of underlying fs are not using the high bits, use the high bits to partition the overlay st_ino address space. The high bits hold the fsid (upper fsid is 0). This way overlay inode numbers are unique and all inodes use overlay st_dev. Inode numbers are also persistent for a given layer configuration. Currently, our only indication for available high ino bits is from a filesystem that supports file handles and uses the default encode_fh() operation, which encodes a 32bit inode number. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-11-07 04:55:04 -07:00
int ovl_can_decode_fh(struct super_block *sb);
ovl: introduce the inodes index dir feature Create the index dir on mount. The index dir will contain hardlinks to upper inodes, named after the hex representation of their origin lower inodes. The index dir is going to be used to prevent breaking lower hardlinks on copy up and to implement overlayfs NFS export. Because the feature is not fully backward compat, enabling the feature is opt-in by config/module/mount option. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-21 06:28:36 -06:00
struct dentry *ovl_indexdir(struct super_block *sb);
ovl: add support for "nfs_export" configuration Introduce the "nfs_export" config, module and mount options. The NFS export feature depends on the "index" feature and enables two implicit overlayfs features: "index_all" and "verify_lower". The "index_all" feature creates an index on copy up of every file and directory. The "verify_lower" feature uses the full index to detect overlay filesystems inconsistencies on lookup, like redirect from multiple upper dirs to the same lower dir. NFS export can be enabled for non-upper mount with no index. However, because lower layer redirects cannot be verified with the index, enabling NFS export support on an overlay with no upper layer requires turning off redirect follow (e.g. "redirect_dir=nofollow"). The full index may incur some overhead on mount time, especially when verifying that lower directory file handles are not stale. NFS export support, full index and consistency verification will be implemented by following patches. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-19 02:26:53 -07:00
bool ovl_index_all(struct super_block *sb);
bool ovl_verify_lower(struct super_block *sb);
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
struct ovl_entry *ovl_alloc_entry(unsigned int numlower);
bool ovl_dentry_remote(struct dentry *dentry);
bool ovl_dentry_weird(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
enum ovl_path_type ovl_path_type(struct dentry *dentry);
void ovl_path_upper(struct dentry *dentry, struct path *path);
void ovl_path_lower(struct dentry *dentry, struct path *path);
enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path);
struct dentry *ovl_dentry_upper(struct dentry *dentry);
struct dentry *ovl_dentry_lower(struct dentry *dentry);
ovl: factor out ovl_map_dev_ino() helper A helper for ovl_getattr() to map the values of st_dev and st_ino according to constant st_ino rules. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-11-08 10:39:51 -07:00
struct ovl_layer *ovl_layer_lower(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
struct dentry *ovl_dentry_real(struct dentry *dentry);
ovl: fix xattr get and set with selinux inode_doinit_with_dentry() in SELinux wants to read the upper inode's xattr to get security label, and ovl_xattr_get() calls ovl_dentry_real(), which depends on dentry->d_inode, but d_inode is null and not initialized yet at this point resulting in an Oops. Fix by getting the upperdentry info from the inode directly in this case. Reported-by: Eryu Guan <eguan@redhat.com> Fixes: 09d8b586731b ("ovl: move __upperdentry to ovl_inode") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-20 03:08:21 -06:00
struct dentry *ovl_i_dentry_upper(struct inode *inode);
ovl: move __upperdentry to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
struct inode *ovl_inode_upper(struct inode *inode);
struct inode *ovl_inode_lower(struct inode *inode);
struct inode *ovl_inode_real(struct inode *inode);
ovl: constant d_ino for non-merge dirs Impure directories are ones which contain objects with origins (i.e. those that have been copied up). These are relevant to readdir operation only because of the d_ino field, no other transformation is necessary. Also a directory can become impure between two getdents(2) calls. This patch creates a cache for impure directories. Unlike the cache for merged directories, this one only contains entries with origin and is not refcounted but has a its lifetime tied to that of the dentry. Similarly to the merged cache, the impure cache is invalidated based on a version number. This version number is incremented when an entry with origin is added or removed from the directory. If the cache is empty, then the impure xattr is removed from the directory. This patch also fixes up handling of d_ino for the ".." entry if the parent directory is merged. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-27 13:54:06 -06:00
struct ovl_dir_cache *ovl_dir_cache(struct inode *inode);
void ovl_set_dir_cache(struct inode *inode, struct ovl_dir_cache *cache);
ovl: store 'has_upper' and 'opaque' as bit flags We need to make some room in struct ovl_entry to store information about redirected ancestors for NFS export, so cram two booleans as bit flags. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-14 10:25:31 -07:00
void ovl_dentry_set_flag(unsigned long flag, struct dentry *dentry);
void ovl_dentry_clear_flag(unsigned long flag, struct dentry *dentry);
bool ovl_dentry_test_flag(unsigned long flag, struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
bool ovl_dentry_is_opaque(struct dentry *dentry);
ovl: add ovl_dentry_is_whiteout() And use it instead of ovl_dentry_is_opaque() where appropriate. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
bool ovl_dentry_is_whiteout(struct dentry *dentry);
ovl: opaque cleanup oe->opaque is set for a) whiteouts b) directories having the "trusted.overlay.opaque" xattr Case b can be simplified, since setting the xattr always implies setting oe->opaque. Also once set, the opaque flag is never cleared. Don't need to set opaque flag for non-directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:57 -07:00
void ovl_dentry_set_opaque(struct dentry *dentry);
ovl: add flag for upper in ovl_entry For rename, we need to ensure that an upper alias exists for hard links before attempting the operation. Introduce a flag in ovl_entry to track the state of the upper alias. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:18 -06:00
bool ovl_dentry_has_upper_alias(struct dentry *dentry);
void ovl_dentry_set_upper_alias(struct dentry *dentry);
ovl: redirect on rename-dir Current code returns EXDEV when a directory would need to be copied up to move. We could copy up the directory tree in this case, but there's another, simpler solution: point to old lower directory from moved upper directory. This is achieved with a "trusted.overlay.redirect" xattr storing the path relative to the root of the overlay. After such attribute has been set, the directory can be moved without further actions required. This is a backward incompatible feature, old kernels won't be able to correctly mount an overlay containing redirected directories. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
bool ovl_redirect_dir(struct super_block *sb);
const char *ovl_dentry_get_redirect(struct dentry *dentry);
void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect);
ovl: move __upperdentry to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
void ovl_inode_init(struct inode *inode, struct dentry *upperdentry,
struct dentry *lowerdentry);
void ovl_inode_update(struct inode *inode, struct dentry *upperdentry);
ovl: constant d_ino for non-merge dirs Impure directories are ones which contain objects with origins (i.e. those that have been copied up). These are relevant to readdir operation only because of the d_ino field, no other transformation is necessary. Also a directory can become impure between two getdents(2) calls. This patch creates a cache for impure directories. Unlike the cache for merged directories, this one only contains entries with origin and is not refcounted but has a its lifetime tied to that of the dentry. Similarly to the merged cache, the impure cache is invalidated based on a version number. This version number is incremented when an entry with origin is added or removed from the directory. If the cache is empty, then the impure xattr is removed from the directory. This patch also fixes up handling of d_ino for the ".." entry if the parent directory is merged. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-27 13:54:06 -06:00
void ovl_dentry_version_inc(struct dentry *dentry, bool impurity);
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
u64 ovl_dentry_version_get(struct dentry *dentry);
bool ovl_is_whiteout(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
struct file *ovl_path_open(struct path *path, int flags);
ovl: introduce copy up waitqueue The overlay sb 'copyup_wq' and overlay inode 'copying' condition variable are about to replace the upper sb rename_lock, as finer grained synchronization objects for concurrent copy up. Suggested-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-16 21:34:56 -07:00
int ovl_copy_up_start(struct dentry *dentry);
void ovl_copy_up_end(struct dentry *dentry);
ovl: no direct iteration for dir with origin xattr If a non-merge dir in an overlay mount has an overlay.origin xattr, it means it was once an upper merge dir, which may contain whiteouts and then the lower dir was removed under it. Do not iterate real dir directly in this case to avoid exposing whiteouts. [SzM] Set OVL_WHITEOUT for all merge directories as well. [amir] A directory that was just copied up does not have the OVL_WHITEOUTS flag. We need to set it to fix merge dir iteration. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-25 07:37:17 -06:00
bool ovl_check_origin_xattr(struct dentry *dentry);
ovl: mark upper merge dir with type origin entries "impure" An upper dir is marked "impure" to let ovl_iterate() know that this directory may contain non pure upper entries whose d_ino may need to be read from the origin inode. We already mark a non-merge dir "impure" when moving a non-pure child entry inside it, to let ovl_iterate() know not to iterate the non-merge dir directly. Mark also a merge dir "impure" when moving a non-pure child entry inside it and when copying up a child entry inside it. This can be used to optimize ovl_iterate() to perform a "pure merge" of upper and lower directories, merging the content of the directories, without having to read d_ino from origin inodes. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-24 06:29:33 -06:00
bool ovl_check_dir_xattr(struct dentry *dentry, const char *name);
int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry,
const char *name, const void *value, size_t size,
int xerr);
int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry);
ovl: move impure to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
void ovl_set_flag(unsigned long flag, struct inode *inode);
ovl: constant d_ino for non-merge dirs Impure directories are ones which contain objects with origins (i.e. those that have been copied up). These are relevant to readdir operation only because of the d_ino field, no other transformation is necessary. Also a directory can become impure between two getdents(2) calls. This patch creates a cache for impure directories. Unlike the cache for merged directories, this one only contains entries with origin and is not refcounted but has a its lifetime tied to that of the dentry. Similarly to the merged cache, the impure cache is invalidated based on a version number. This version number is incremented when an entry with origin is added or removed from the directory. If the cache is empty, then the impure xattr is removed from the directory. This patch also fixes up handling of d_ino for the ".." entry if the parent directory is merged. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-27 13:54:06 -06:00
void ovl_clear_flag(unsigned long flag, struct inode *inode);
ovl: move impure to ovl_inode Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-04 14:03:16 -06:00
bool ovl_test_flag(unsigned long flag, struct inode *inode);
vfs: introduce inode 'inuse' lock Added an i_state flag I_INUSE and helpers to set/clear/test the bit. The 'inuse' lock is an 'advisory' inode lock, that can be used to extend exclusive create protection beyond parent->i_mutex lock among cooperating users. This is going to be used by overlayfs to get exclusive ownership on upper and work dirs among overlayfs mounts. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-21 06:28:32 -06:00
bool ovl_inuse_trylock(struct dentry *dentry);
void ovl_inuse_unlock(struct dentry *dentry);
ovl: create ovl_need_index() helper The helper determines which lower file needs to be indexed on copy up and before nlink changes. For index=on, the helper evaluates to true for lower hardlinks. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-09-25 22:55:26 -06:00
bool ovl_need_index(struct dentry *dentry);
ovl: persistent overlay inode nlink for indexed inodes With inodes index enabled, an overlay inode nlink counts the union of upper and non-covered lower hardlinks. During the lifetime of a non-pure upper inode, the following nlink modifying operations can happen: 1. Lower hardlink copy up 2. Upper hardlink created, unlinked or renamed over 3. Lower hardlink whiteout or renamed over For the first, copy up case, the union nlink does not change, whether the operation succeeds or fails, but the upper inode nlink may change. Therefore, before copy up, we store the union nlink value relative to the lower inode nlink in the index inode xattr trusted.overlay.nlink. For the second, upper hardlink case, the union nlink should be incremented or decremented IFF the operation succeeds, aligned with nlink change of the upper inode. Therefore, before link/unlink/rename, we store the union nlink value relative to the upper inode nlink in the index inode. For the last, lower cover up case, we simplify things by preceding the whiteout or cover up with copy up. This makes sure that there is an index upper inode where the nlink xattr can be stored before the copied up upper entry is unlink. Return the overlay inode nlinks for indexed upper inodes on stat(2). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-20 06:35:14 -06:00
int ovl_nlink_start(struct dentry *dentry, bool *locked);
void ovl_nlink_end(struct dentry *dentry, bool locked);
ovl: fix missing unlock_rename() in ovl_do_copy_up() Use the ovl_lock_rename_workdir() helper which requires unlock_rename() only on lock success. Fixes: ("fd210b7d67ee ovl: move copy up lock out") Cc: <stable@vger.kernel.org> # v4.13 Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-09-25 07:39:55 -06:00
int ovl_lock_rename_workdir(struct dentry *workdir, struct dentry *upperdir);
ovl: mark upper merge dir with type origin entries "impure" An upper dir is marked "impure" to let ovl_iterate() know that this directory may contain non pure upper entries whose d_ino may need to be read from the origin inode. We already mark a non-merge dir "impure" when moving a non-pure child entry inside it, to let ovl_iterate() know not to iterate the non-merge dir directly. Mark also a merge dir "impure" when moving a non-pure child entry inside it and when copying up a child entry inside it. This can be used to optimize ovl_iterate() to perform a "pure merge" of upper and lower directories, merging the content of the directories, without having to read d_ino from origin inodes. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-24 06:29:33 -06:00
static inline bool ovl_is_impuredir(struct dentry *dentry)
{
return ovl_check_dir_xattr(dentry, OVL_XATTR_IMPURE);
}
ovl: constant st_ino for non-samefs with xino On 64bit systems, when overlay layers are not all on the same fs, but all inode numbers of underlying fs are not using the high bits, use the high bits to partition the overlay st_ino address space. The high bits hold the fsid (upper fsid is 0). This way overlay inode numbers are unique and all inodes use overlay st_dev. Inode numbers are also persistent for a given layer configuration. Currently, our only indication for available high ino bits is from a filesystem that supports file handles and uses the default encode_fh() operation, which encodes a 32bit inode number. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-11-07 04:55:04 -07:00
static inline unsigned int ovl_xino_bits(struct super_block *sb)
{
struct ovl_fs *ofs = sb->s_fs_info;
return ofs->xino_bits;
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
/* namei.c */
ovl: decode pure upper file handles Decoding an upper file handle is done by decoding the upper dentry from underlying upper fs, finding or allocating an overlay inode that is hashed by the real upper inode and instantiating an overlay dentry with that inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-18 16:03:23 -07:00
int ovl_check_fh_len(struct ovl_fh *fh, int fh_len);
ovl: do not try to reconnect a disconnected origin dentry On lookup of non directory, we try to decode the origin file handle stored in upper inode. The origin file handle is supposed to be decoded to a disconnected non-dir dentry, which is fine, because we only need the lower inode of a copy up origin. However, if the origin file handle somehow turns out to be a directory we pay the expensive cost of reconnecting the directory dentry, only to get a mismatch file type and drop the dentry. Optimize this case by explicitly opting out of reconnecting the dentry. Opting-out of reconnect is done by passing a NULL acceptable callback to exportfs_decode_fh(). While the case described above is a strange corner case that does not really need to be optimized, the API added for this optimization will be used by a following patch to optimize a more common case of decoding an overlayfs file handle. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-09 06:51:02 -07:00
struct dentry *ovl_decode_real_fh(struct ovl_fh *fh, struct vfsmount *mnt,
bool connected);
int ovl_check_origin_fh(struct ovl_fs *ofs, struct ovl_fh *fh, bool connected,
ovl: decode lower non-dir file handles Decoding a lower non-dir file handle is done by decoding the lower dentry from underlying lower fs, finding or allocating an overlay inode that is hashed by the real lower inode and instantiating an overlay dentry with that inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-19 12:33:44 -07:00
struct dentry *upperdentry, struct ovl_path **stackp);
ovl: generalize ovl_verify_origin() and helpers Remove the "origin" language from the functions that handle set, get and verify of "origin" xattr and pass the xattr name as an argument. The same helpers are going to be used for NFS export to get, get and verify the "upper" xattr for directory index entries. ovl_verify_origin() is now a helper used only to verify non upper file handle stored in "origin" xattr of upper inode. The upper root dir file handle is still stored in "origin" xattr on the index dir for backward compatibility. This is going to be changed by the patch that adds directory index entries support. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-10 23:25:32 -07:00
int ovl_verify_set_fh(struct dentry *dentry, const char *name,
struct dentry *real, bool is_upper, bool set);
ovl: decode indexed dir file handles Decoding an indexed dir file handle is done by looking up the file handle in index dir by name and then decoding the upper dir from the index origin file handle. The decoded upper path is used to lookup an overlay dentry of the same path. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-24 09:42:16 -07:00
struct dentry *ovl_index_upper(struct ovl_fs *ofs, struct dentry *index);
ovl: simplify arguments to ovl_check_origin_fh() Pass the fs instance with lower_layers array instead of the dentry lowerstack array to ovl_check_origin_fh(), because the dentry members of lowerstack play no role in this helper. This change simplifies the argument list of ovl_check_origin(), ovl_cleanup_index() and ovl_verify_index(). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-12 13:40:46 -07:00
int ovl_verify_index(struct ovl_fs *ofs, struct dentry *index);
ovl: lookup index entry for copy up origin When inodes index feature is enabled, lookup in indexdir for the index entry of lower real inode or copy up origin inode. The index entry name is the hex representation of the lower inode file handle. If the index dentry in negative, then either no lower aliases have been copied up yet, or aliases have been copied up in older kernels and are not indexed. If the index dentry for a copy up origin inode is positive, but points to an inode different than the upper inode, then either the upper inode has been copied up and not indexed or it was indexed, but since then index dir was cleared. Either way, that index cannot be used to indentify the overlay inode. If a positive dentry that matches the upper inode was found, then it is safe to use the copy up origin st_ino for upper hardlinks, because all indexed upper hardlinks are represented by the same overlay inode as the copy up origin. Set the INDEX type flag on an indexed upper dentry. A non-upper dentry may also have a positive index from copy up of another lower hardlink. This situation will be handled by following patches. Index lookup is going to be used to prevent breaking hardlinks on copy up. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-21 06:28:41 -06:00
int ovl_get_index_name(struct dentry *origin, struct qstr *name);
ovl: factor out ovl_get_index_fh() helper The helper is needed to lookup an index by file handle for NFS export. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-28 11:23:05 -07:00
struct dentry *ovl_get_index_fh(struct ovl_fs *ofs, struct ovl_fh *fh);
ovl: lookup indexed ancestor of lower dir ovl_lookup_real() in lower layer walks back lower parents to find the topmost indexed parent. If an indexed ancestor is found before reaching lower layer root, ovl_lookup_real() is called recursively with upper layer to walk back from indexed upper to the topmost connected/hashed upper parent (or up to root). ovl_lookup_real() in upper layer then walks forward to connect the topmost upper overlay dir dentry and ovl_lookup_real() in lower layer continues to walk forward to connect the decoded lower overlay dir dentry. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-17 05:40:27 -07:00
struct dentry *ovl_lookup_index(struct ovl_fs *ofs, struct dentry *upper,
struct dentry *origin, bool verify);
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
int ovl_path_next(int idx, struct dentry *dentry, struct path *path);
ovl: simplify arguments to ovl_check_origin_fh() Pass the fs instance with lower_layers array instead of the dentry lowerstack array to ovl_check_origin_fh(), because the dentry members of lowerstack play no role in this helper. This change simplifies the argument list of ovl_check_origin(), ovl_cleanup_index() and ovl_verify_index(). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-12 13:40:46 -07:00
struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
unsigned int flags);
ovl: split super.c fs/overlayfs/super.c is the biggest of the overlayfs source files and it contains various utility functions as well as the rather complicated lookup code. Split these parts out to separate files. Before: 1446 fs/overlayfs/super.c After: 919 fs/overlayfs/super.c 267 fs/overlayfs/namei.c 235 fs/overlayfs/util.c 51 fs/overlayfs/ovl_entry.h Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:56 -07:00
bool ovl_lower_positive(struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: generalize ovl_verify_origin() and helpers Remove the "origin" language from the functions that handle set, get and verify of "origin" xattr and pass the xattr name as an argument. The same helpers are going to be used for NFS export to get, get and verify the "upper" xattr for directory index entries. ovl_verify_origin() is now a helper used only to verify non upper file handle stored in "origin" xattr of upper inode. The upper root dir file handle is still stored in "origin" xattr on the index dir for backward compatibility. This is going to be changed by the patch that adds directory index entries support. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-10 23:25:32 -07:00
static inline int ovl_verify_origin(struct dentry *upper,
struct dentry *origin, bool set)
{
return ovl_verify_set_fh(upper, OVL_XATTR_ORIGIN, origin, false, set);
}
ovl: use directory index entries for consistency verification A directory index is a directory type entry in index dir with a "trusted.overlay.upper" xattr containing an encoded ovl_fh of the merge directory upper dir inode. On lookup of non-dir files, lower file is followed by origin file handle. On lookup of dir entries, lower dir is found by name and then compared to origin file handle. We only trust dir index if we verified that lower dir matches origin file handle, otherwise index may be inconsistent and we ignore it. If we find an indexed non-upper dir or an indexed merged dir, whose index 'upper' xattr points to a different upper dir, that means that the lower directory may be also referenced by another upper dir via redirect, so we fail the lookup on inconsistency error. To be consistent with directory index entries format, the association of index dir to upper root dir, that was stored by older kernels in "trusted.overlay.origin" xattr is now stored in "trusted.overlay.upper" xattr. This also serves as an indication that overlay was mounted with a kernel that support index directory entries. For backward compatibility, if an 'origin' xattr exists on the index dir we also verify it on mount. Directory index entries are going to be used for NFS export. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-11 01:47:03 -07:00
static inline int ovl_verify_upper(struct dentry *index,
struct dentry *upper, bool set)
{
return ovl_verify_set_fh(index, OVL_XATTR_UPPER, upper, true, set);
}
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
/* readdir.c */
extern const struct file_operations ovl_dir_operations;
int ovl_check_empty_dir(struct dentry *dentry, struct list_head *list);
void ovl_cleanup_whiteouts(struct dentry *upper, struct list_head *list);
void ovl_cache_free(struct list_head *list);
ovl: constant d_ino for non-merge dirs Impure directories are ones which contain objects with origins (i.e. those that have been copied up). These are relevant to readdir operation only because of the d_ino field, no other transformation is necessary. Also a directory can become impure between two getdents(2) calls. This patch creates a cache for impure directories. Unlike the cache for merged directories, this one only contains entries with origin and is not refcounted but has a its lifetime tied to that of the dentry. Similarly to the merged cache, the impure cache is invalidated based on a version number. This version number is incremented when an entry with origin is added or removed from the directory. If the cache is empty, then the impure xattr is removed from the directory. This patch also fixes up handling of d_ino for the ".." entry if the parent directory is merged. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-27 13:54:06 -06:00
void ovl_dir_cache_free(struct inode *inode);
ovl: Ensure upper filesystem supports d_type In some instances xfs has been created with ftype=0 and there if a file on lower fs is removed, overlay leaves a whiteout in upper fs but that whiteout does not get filtered out and is visible to overlayfs users. And reason it does not get filtered out because upper filesystem does not report file type of whiteout as DT_CHR during iterate_dir(). So it seems to be a requirement that upper filesystem support d_type for overlayfs to work properly. Do this check during mount and fail if d_type is not supported. Suggested-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-02-22 07:28:34 -07:00
int ovl_check_d_type_supported(struct path *realpath);
ovl: proper cleanup of workdir When mounting overlayfs it needs a clean "work" directory under the supplied workdir. Previously the mount code removed this directory if it already existed and created a new one. If the removal failed (e.g. directory was not empty) then it fell back to a read-only mount not using the workdir. While this has never been reported, it is possible to get a non-empty "work" dir from a previous mount of overlayfs in case of crash in the middle of an operation using the work directory. In this case the left over state should be discarded and the overlay filesystem will be consistent, guaranteed by the atomicity of operations on moving to/from the workdir to the upper layer. This patch implements cleaning out any files left in workdir. It is implemented using real recursion for simplicity, but the depth is limited to 2, because the worst case is that of a directory containing whiteouts under "work". Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-09-01 03:11:59 -06:00
void ovl_workdir_cleanup(struct inode *dir, struct vfsmount *mnt,
struct dentry *dentry, int level);
ovl: simplify arguments to ovl_check_origin_fh() Pass the fs instance with lower_layers array instead of the dentry lowerstack array to ovl_check_origin_fh(), because the dentry members of lowerstack play no role in this helper. This change simplifies the argument list of ovl_check_origin(), ovl_cleanup_index() and ovl_verify_index(). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-12 13:40:46 -07:00
int ovl_indexdir_cleanup(struct ovl_fs *ofs);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
/* inode.c */
ovl: persistent overlay inode nlink for indexed inodes With inodes index enabled, an overlay inode nlink counts the union of upper and non-covered lower hardlinks. During the lifetime of a non-pure upper inode, the following nlink modifying operations can happen: 1. Lower hardlink copy up 2. Upper hardlink created, unlinked or renamed over 3. Lower hardlink whiteout or renamed over For the first, copy up case, the union nlink does not change, whether the operation succeeds or fails, but the upper inode nlink may change. Therefore, before copy up, we store the union nlink value relative to the lower inode nlink in the index inode xattr trusted.overlay.nlink. For the second, upper hardlink case, the union nlink should be incremented or decremented IFF the operation succeeds, aligned with nlink change of the upper inode. Therefore, before link/unlink/rename, we store the union nlink value relative to the upper inode nlink in the index inode. For the last, lower cover up case, we simplify things by preceding the whiteout or cover up with copy up. This makes sure that there is an index upper inode where the nlink xattr can be stored before the copied up upper entry is unlink. Return the overlay inode nlinks for indexed upper inodes on stat(2). Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-20 06:35:14 -06:00
int ovl_set_nlink_upper(struct dentry *dentry);
int ovl_set_nlink_lower(struct dentry *dentry);
ovl: cleanup orphan index entries index entry should live only as long as there are upper or lower hardlinks. Cleanup orphan index entries on mount and when dropping the last overlay inode nlink. When about to cleanup or link up to orphan index and the index inode nlink > 1, admit that something went wrong and adjust overlay nlink to index inode nlink - 1 to prevent it from dropping below zero. This could happen when adding lower hardlinks underneath a mounted overlay and then trying to unlink them. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-21 04:46:12 -06:00
unsigned int ovl_get_nlink(struct dentry *lowerdentry,
struct dentry *upperdentry,
unsigned int fallback);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
int ovl_setattr(struct dentry *dentry, struct iattr *attr);
ovl: merge getattr for dir and nondir Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-05 03:38:58 -06:00
int ovl_getattr(const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int flags);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
int ovl_permission(struct inode *inode, int mask);
ovl: fix xattr get and set with selinux inode_doinit_with_dentry() in SELinux wants to read the upper inode's xattr to get security label, and ovl_xattr_get() calls ovl_dentry_real(), which depends on dentry->d_inode, but d_inode is null and not initialized yet at this point resulting in an Oops. Fix by getting the upperdentry info from the inode directly in this case. Reported-by: Eryu Guan <eguan@redhat.com> Fixes: 09d8b586731b ("ovl: move __upperdentry to ovl_inode") Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-20 03:08:21 -06:00
int ovl_xattr_set(struct dentry *dentry, struct inode *inode, const char *name,
const void *value, size_t size, int flags);
int ovl_xattr_get(struct dentry *dentry, struct inode *inode, const char *name,
ovl: Switch to generic_getxattr Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use those same handlers for iop->getxattr as well. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-08-22 09:52:55 -06:00
void *value, size_t size);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size);
ovl: define ->get_acl() for overlay inodes Now we are planning to do DAC permission checks on overlay inode itself. And to make it work, we will need to make sure we can get acls from underlying inode. So define ->get_acl() for overlay inodes and this in turn calls into underlying filesystem to get acls, if any. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-01 14:34:26 -06:00
struct posix_acl *ovl_get_acl(struct inode *inode, int type);
vfs: merge .d_select_inode() into .d_real() The two methods essentially do the same: find the real dentry/inode belonging to an overlay dentry. The difference is in the usage: vfs_open() uses ->d_select_inode() and expects the function to perform copy-up if necessary based on the open flags argument. file_dentry() uses ->d_real() passing in the overlay dentry as well as the underlying inode. vfs_rename() uses ->d_select_inode() but passes zero flags. ->d_real() with a zero inode would have worked just as well here. This patch merges the functionality of ->d_select_inode() into ->d_real() by adding an 'open_flags' argument to the latter. [Al Viro] Make the signature of d_real() match that of ->d_real() again. And constify the inode argument, while we are at it. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-30 00:53:27 -06:00
int ovl_open_maybe_copy_up(struct dentry *dentry, unsigned int file_flags);
vfs: change inode times to use struct timespec64 struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( attrp->ia_xtime1 ); | node->i_xtime1 = current_time(...); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | node->i_xtime1 = node->i_xtime3 = - e; + timespec_to_timespec64(e); | - node->i_xtime1 = e; + node->i_xtime1 = timespec_to_timespec64(e); ) Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: <anton@tuxera.com> Cc: <balbi@kernel.org> Cc: <bfields@fieldses.org> Cc: <darrick.wong@oracle.com> Cc: <dhowells@redhat.com> Cc: <dsterba@suse.com> Cc: <dwmw2@infradead.org> Cc: <hch@lst.de> Cc: <hirofumi@mail.parknet.co.jp> Cc: <hubcap@omnibond.com> Cc: <jack@suse.com> Cc: <jaegeuk@kernel.org> Cc: <jaharkes@cs.cmu.edu> Cc: <jslaby@suse.com> Cc: <keescook@chromium.org> Cc: <mark@fasheh.com> Cc: <miklos@szeredi.hu> Cc: <nico@linaro.org> Cc: <reiserfs-devel@vger.kernel.org> Cc: <richard@nod.at> Cc: <sage@redhat.com> Cc: <sfrench@samba.org> Cc: <swhiteho@redhat.com> Cc: <tj@kernel.org> Cc: <trond.myklebust@primarydata.com> Cc: <tytso@mit.edu> Cc: <viro@zeniv.linux.org.uk>
2018-05-08 20:36:02 -06:00
int ovl_update_time(struct inode *inode, struct timespec64 *ts, int flags);
ovl: don't copy up opaqueness When a copy up of a directory occurs which has the opaque xattr set, the xattr remains in the upper directory. The immediate behavior with overlayfs is that the upper directory is not treated as opaque, however after a remount the opaque flag is used and upper directory is treated as opaque. This causes files created in the lower layer to be hidden when using multiple lower directories. Fix by not copying up the opaque flag. To reproduce: ----8<---------8<---------8<---------8<---------8<---------8<---- mkdir -p l/d/s u v w mnt mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt rm -rf mnt/d/ mkdir -p mnt/d/n umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt touch mnt/d/foo umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt ls mnt/d ----8<---------8<---------8<---------8<---------8<---------8<---- output should be: "foo n" Reported-by: Derek McGowan <dmcg@drizz.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-08-08 07:08:49 -06:00
bool ovl_is_private_xattr(const char *name);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
ovl: treat special files like a regular fs No sense in opening special files on the underlying layers, they work just as well if opened on the overlay. Side effect is that it's no longer possible to connect one side of a pipe opened on overlayfs with the other side opened on the underlying layer. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-16 03:02:55 -07:00
struct inode *ovl_new_inode(struct super_block *sb, umode_t mode, dev_t rdev);
ovl: lookup connected ancestor of dir in inode cache Decoding a dir file handle requires walking backward up to layer root and for lower dir also checking the index to see if any of the parents have been copied up. Lookup overlay ancestor dentry in inode/dentry cache by decoded real parents to shortcut looking up all the way back to layer root. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-18 07:39:13 -07:00
struct inode *ovl_lookup_inode(struct super_block *sb, struct dentry *real,
bool is_upper);
ovl: do not pass overlay dentry to ovl_get_inode() This is needed for using ovl_get_inode() for decoding file handles for NFS export. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-12 14:43:16 -07:00
struct inode *ovl_get_inode(struct super_block *sb, struct dentry *upperdentry,
ovl: consistent i_ino for non-samefs with xino When overlay layers are not all on the same fs, but all inode numbers of underlying fs do not use the high 'xino' bits, overlay st_ino values are constant and persistent. In that case, set i_ino value to the same value as st_ino for nfsd readdirplus validator. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-16 02:39:37 -06:00
struct ovl_path *lowerpath, struct dentry *index,
ovl: do not pass overlay dentry to ovl_get_inode() This is needed for using ovl_get_inode() for decoding file handles for NFS export. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-12-12 14:43:16 -07:00
unsigned int numlower);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
static inline void ovl_copyattr(struct inode *from, struct inode *to)
{
to->i_uid = from->i_uid;
to->i_gid = from->i_gid;
ovl: Copy up underlying inode's ->i_mode to overlay inode Right now when a new overlay inode is created, we initialize overlay inode's ->i_mode from underlying inode ->i_mode but we retain only file type bits (S_IFMT) and discard permission bits. This patch changes it and retains permission bits too. This should allow overlay to do permission checks on overlay inode itself in task context. [SzM] It also fixes clearing suid/sgid bits on write. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Reported-by: Eryu Guan <eguan@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 4bacc9c9234c ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay") Cc: <stable@vger.kernel.org>
2016-07-01 14:34:25 -06:00
to->i_mode = from->i_mode;
ovl: update atime on upper Fix atime update logic in overlayfs. This patch adds an i_op->update_time() handler to overlayfs inodes. This forwards atime updates to the upper layer only. No atime updates are done on lower layers. Remove implicit atime updates to underlying files and directories with O_NOATIME. Remove explicit atime update in ovl_readlink(). Clear atime related mnt flags from cloned upper mount. This means atime updates are controlled purely by overlayfs mount options. Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 04:05:23 -06:00
to->i_atime = from->i_atime;
to->i_mtime = from->i_mtime;
to->i_ctime = from->i_ctime;
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
}
/* dir.c */
extern const struct inode_operations ovl_dir_inode_operations;
ovl: remove unused arg from ovl_lookup_temp() Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-19 01:33:49 -06:00
struct dentry *ovl_lookup_temp(struct dentry *workdir);
ovl: whiteout index when union nlink drops to zero With NFS export feature enabled, when overlay inode nlink drops to zero, instead of removing the index entry, replace it with a whiteout index entry. This is needed for NFS export in order to prevent future open by handle from opening the lower file directly. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-10-24 08:38:33 -06:00
int ovl_cleanup_and_whiteout(struct dentry *workdir, struct inode *dir,
struct dentry *dentry);
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
struct cattr {
dev_t rdev;
umode_t mode;
const char *link;
};
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
int ovl_create_real(struct inode *dir, struct dentry *newdentry,
ovl: clean up kstat usage FWIW, there's a bit of abuse of struct kstat in overlayfs object creation paths - for one thing, it ends up with a very small subset of struct kstat (mode + rdev), for another it also needs link in case of symlinks and ends up passing it separately. IMO it would be better to introduce a separate object for that. In principle, we might even lift that thing into general API and switch ->mkdir()/->mknod()/->symlink() to identical calling conventions. Hell knows, perhaps ->create() as well... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-12-04 10:33:17 -07:00
struct cattr *attr,
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
struct dentry *hardlink, bool debug);
ovl: cleanup bad and stale index entries on mount Bad index entries are entries whose name does not match the origin file handle stored in trusted.overlay.origin xattr. Bad index entries could be a result of a system power off in the middle of copy up. Stale index entries are entries whose origin file handle is stale. Stale index entries could be a result of copying layers or removing lower entries while the overlay is not mounted. The case of copying layers should be detected earlier by the verification of upper root dir origin and index dir origin. Both bad and stale index entries are detected and removed on mount. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-06-21 06:28:42 -06:00
int ovl_cleanup(struct inode *dir, struct dentry *dentry);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
/* copy_up.c */
int ovl_copy_up(struct dentry *dentry);
ovl: fold ovl_copy_up_truncate() into ovl_copy_up() This removes code duplication. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-12 12:36:03 -07:00
int ovl_copy_up_flags(struct dentry *dentry, int flags);
overlay filesystem Overlayfs allows one, usually read-write, directory tree to be overlaid onto another, read-only directory tree. All modifications go to the upper, writable layer. This type of mechanism is most often used for live CDs but there's a wide variety of other uses. The implementation differs from other "union filesystem" implementations in that after a file is opened all operations go directly to the underlying, lower or upper, filesystems. This simplifies the implementation and allows native performance in these cases. The dentry tree is duplicated from the underlying filesystems, this enables fast cached lookups without adding special support into the VFS. This uses slightly more memory than union mounts, but dentries are relatively small. Currently inodes are duplicated as well, but it is a possible optimization to share inodes for non-directories. Opening non directories results in the open forwarded to the underlying filesystem. This makes the behavior very similar to union mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file descriptors). Usage: mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay The following cotributions have been folded into this patch: Neil Brown <neilb@suse.de>: - minimal remount support - use correct seek function for directories - initialise is_real before use - rename ovl_fill_cache to ovl_dir_read Felix Fietkau <nbd@openwrt.org>: - fix a deadlock in ovl_dir_read_merged - fix a deadlock in ovl_remove_whiteouts Erez Zadok <ezk@fsl.cs.sunysb.edu> - fix cleanup after WARN_ON Sedat Dilek <sedat.dilek@googlemail.com> - fix up permission to confirm to new API Robin Dong <hao.bigrat@gmail.com> - fix possible leak in ovl_new_inode - create new inode in ovl_link Andy Whitcroft <apw@canonical.com> - switch to __inode_permission() - copy up i_uid/i_gid from the underlying inode AV: - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(), lack of check for udir being the parent of upper, dropping and regaining the lock on udir (which would require _another_ check for parent being right). - bogus d_drop() in copyup and rename [fix from your mail] - copyup/remove and copyup/rename races [fix from your mail] - ovl_dir_fsync() leaving ERR_PTR() in ->realfile - ovl_entry_free() is pointless - it's just a kfree_rcu() - fold ovl_do_lookup() into ovl_lookup() - manually assigning ->d_op is wrong. Just use ->s_d_op. [patches picked from Miklos]: * copyup/remove and copyup/rename races * bogus d_drop() in copyup and rename Also thanks to the following people for testing and reporting bugs: Jordi Pujol <jordipujolp@gmail.com> Andy Whitcroft <apw@canonical.com> Michal Suchanek <hramrach@centrum.cz> Felix Fietkau <nbd@openwrt.org> Erez Zadok <ezk@fsl.cs.sunysb.edu> Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-23 16:14:38 -06:00
int ovl_copy_xattr(struct dentry *old, struct dentry *new);
int ovl_set_attr(struct dentry *upper, struct kstat *stat);
ovl: disambiguate ovl_encode_fh() Rename ovl_encode_fh() to ovl_encode_real_fh() to differentiate from the exportfs function ovl_encode_inode_fh() and change the latter to ovl_encode_fh() to match the exportfs method name. Rename ovl_decode_fh() to ovl_decode_real_fh() for consistency. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-02-02 01:42:03 -07:00
struct ovl_fh *ovl_encode_real_fh(struct dentry *real, bool is_upper);
ovl: fix inconsistent d_ino for legacy merge dir For a merge dir that was copied up before v4.12 or that was hand crafted offline (e.g. mkdir {upper/lower}/dir), upper dir does not contain the 'trusted.overlay.origin' xattr. In that case, stat(2) on the merge dir returns the lower dir st_ino, but getdents(2) returns the upper dir d_ino. After this change, on merge dir lookup, missing origin xattr on upper dir will be fixed and 'impure' xattr will be fixed on parent of the legacy merge dir. Suggested-by: zhangyi (F) <yi.zhang@huawei.com> Reviewed-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-03 10:34:45 -07:00
int ovl_set_origin(struct dentry *dentry, struct dentry *lower,
struct dentry *upper);
ovl: encode pure upper file handles Encode overlay file handles as struct ovl_fh containing the file handle encoding of the real upper inode. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-07-12 05:17:16 -06:00
/* export.c */
extern const struct export_operations ovl_export_operations;