2005-04-16 16:20:36 -06:00
|
|
|
/*
|
|
|
|
* gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
|
|
* monitoring
|
|
|
|
* Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
|
|
|
|
* Kyosti Malkki <kmalkki@cc.hut.fi>
|
|
|
|
* Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
|
|
|
|
* Jean Delvare <khali@linux-fr.org>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*
|
|
|
|
* Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
|
|
|
|
* and advice of Greg Kroah-Hartman.
|
|
|
|
*
|
|
|
|
* Notes about the port:
|
|
|
|
* Release 0x00 of the GL518SM chipset doesn't support reading of in0,
|
|
|
|
* in1 nor in2. The original driver had an ugly workaround to get them
|
|
|
|
* anyway (changing limits and watching alarms trigger and wear off).
|
|
|
|
* We did not keep that part of the original driver in the Linux 2.6
|
|
|
|
* version, since it was making the driver significantly more complex
|
|
|
|
* with no real benefit.
|
|
|
|
*
|
|
|
|
* History:
|
|
|
|
* 2004-01-28 Original port. (Hong-Gunn Chew)
|
|
|
|
* 2004-01-31 Code review and approval. (Jean Delvare)
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/jiffies.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/i2c-sensor.h>
|
2005-07-15 19:39:18 -06:00
|
|
|
#include <linux/hwmon.h>
|
|
|
|
#include <linux/err.h>
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/* Addresses to scan */
|
|
|
|
static unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
|
|
|
|
|
|
|
|
/* Insmod parameters */
|
|
|
|
SENSORS_INSMOD_2(gl518sm_r00, gl518sm_r80);
|
|
|
|
|
|
|
|
/* Many GL518 constants specified below */
|
|
|
|
|
|
|
|
/* The GL518 registers */
|
|
|
|
#define GL518_REG_CHIP_ID 0x00
|
|
|
|
#define GL518_REG_REVISION 0x01
|
|
|
|
#define GL518_REG_VENDOR_ID 0x02
|
|
|
|
#define GL518_REG_CONF 0x03
|
|
|
|
#define GL518_REG_TEMP_IN 0x04
|
|
|
|
#define GL518_REG_TEMP_MAX 0x05
|
|
|
|
#define GL518_REG_TEMP_HYST 0x06
|
|
|
|
#define GL518_REG_FAN_COUNT 0x07
|
|
|
|
#define GL518_REG_FAN_LIMIT 0x08
|
|
|
|
#define GL518_REG_VIN1_LIMIT 0x09
|
|
|
|
#define GL518_REG_VIN2_LIMIT 0x0a
|
|
|
|
#define GL518_REG_VIN3_LIMIT 0x0b
|
|
|
|
#define GL518_REG_VDD_LIMIT 0x0c
|
|
|
|
#define GL518_REG_VIN3 0x0d
|
|
|
|
#define GL518_REG_MISC 0x0f
|
|
|
|
#define GL518_REG_ALARM 0x10
|
|
|
|
#define GL518_REG_MASK 0x11
|
|
|
|
#define GL518_REG_INT 0x12
|
|
|
|
#define GL518_REG_VIN2 0x13
|
|
|
|
#define GL518_REG_VIN1 0x14
|
|
|
|
#define GL518_REG_VDD 0x15
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Conversions. Rounding and limit checking is only done on the TO_REG
|
|
|
|
* variants. Note that you should be a bit careful with which arguments
|
|
|
|
* these macros are called: arguments may be evaluated more than once.
|
|
|
|
* Fixing this is just not worth it.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define RAW_FROM_REG(val) val
|
|
|
|
|
|
|
|
#define BOOL_FROM_REG(val) ((val)?0:1)
|
|
|
|
#define BOOL_TO_REG(val) ((val)?0:1)
|
|
|
|
|
|
|
|
#define TEMP_TO_REG(val) (SENSORS_LIMIT(((((val)<0? \
|
|
|
|
(val)-500:(val)+500)/1000)+119),0,255))
|
|
|
|
#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
|
|
|
|
|
|
|
|
static inline u8 FAN_TO_REG(long rpm, int div)
|
|
|
|
{
|
|
|
|
long rpmdiv;
|
|
|
|
if (rpm == 0)
|
|
|
|
return 0;
|
|
|
|
rpmdiv = SENSORS_LIMIT(rpm, 1, 1920000) * div;
|
|
|
|
return SENSORS_LIMIT((960000 + rpmdiv / 2) / rpmdiv, 1, 255);
|
|
|
|
}
|
|
|
|
#define FAN_FROM_REG(val,div) ((val)==0 ? 0 : (960000/((val)*(div))))
|
|
|
|
|
|
|
|
#define IN_TO_REG(val) (SENSORS_LIMIT((((val)+9)/19),0,255))
|
|
|
|
#define IN_FROM_REG(val) ((val)*19)
|
|
|
|
|
|
|
|
#define VDD_TO_REG(val) (SENSORS_LIMIT((((val)*4+47)/95),0,255))
|
|
|
|
#define VDD_FROM_REG(val) (((val)*95+2)/4)
|
|
|
|
|
|
|
|
#define DIV_TO_REG(val) ((val)==4?2:(val)==2?1:(val)==1?0:3)
|
|
|
|
#define DIV_FROM_REG(val) (1 << (val))
|
|
|
|
|
|
|
|
#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
|
|
|
|
#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
|
|
|
|
|
|
|
|
/* Each client has this additional data */
|
|
|
|
struct gl518_data {
|
|
|
|
struct i2c_client client;
|
2005-07-15 19:39:18 -06:00
|
|
|
struct class_device *class_dev;
|
2005-04-16 16:20:36 -06:00
|
|
|
enum chips type;
|
|
|
|
|
|
|
|
struct semaphore update_lock;
|
|
|
|
char valid; /* !=0 if following fields are valid */
|
|
|
|
unsigned long last_updated; /* In jiffies */
|
|
|
|
|
|
|
|
u8 voltage_in[4]; /* Register values; [0] = VDD */
|
|
|
|
u8 voltage_min[4]; /* Register values; [0] = VDD */
|
|
|
|
u8 voltage_max[4]; /* Register values; [0] = VDD */
|
|
|
|
u8 iter_voltage_in[4]; /* Register values; [0] = VDD */
|
|
|
|
u8 fan_in[2];
|
|
|
|
u8 fan_min[2];
|
|
|
|
u8 fan_div[2]; /* Register encoding, shifted right */
|
|
|
|
u8 fan_auto1; /* Boolean */
|
|
|
|
u8 temp_in; /* Register values */
|
|
|
|
u8 temp_max; /* Register values */
|
|
|
|
u8 temp_hyst; /* Register values */
|
|
|
|
u8 alarms; /* Register value */
|
|
|
|
u8 alarm_mask; /* Register value */
|
|
|
|
u8 beep_mask; /* Register value */
|
|
|
|
u8 beep_enable; /* Boolean */
|
|
|
|
};
|
|
|
|
|
|
|
|
static int gl518_attach_adapter(struct i2c_adapter *adapter);
|
|
|
|
static int gl518_detect(struct i2c_adapter *adapter, int address, int kind);
|
|
|
|
static void gl518_init_client(struct i2c_client *client);
|
|
|
|
static int gl518_detach_client(struct i2c_client *client);
|
|
|
|
static int gl518_read_value(struct i2c_client *client, u8 reg);
|
|
|
|
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
|
|
|
|
static struct gl518_data *gl518_update_device(struct device *dev);
|
|
|
|
|
|
|
|
/* This is the driver that will be inserted */
|
|
|
|
static struct i2c_driver gl518_driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "gl518sm",
|
|
|
|
.id = I2C_DRIVERID_GL518,
|
|
|
|
.flags = I2C_DF_NOTIFY,
|
|
|
|
.attach_adapter = gl518_attach_adapter,
|
|
|
|
.detach_client = gl518_detach_client,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Sysfs stuff
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define show(type, suffix, value) \
|
2005-05-17 04:41:35 -06:00
|
|
|
static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
|
2005-04-16 16:20:36 -06:00
|
|
|
{ \
|
|
|
|
struct gl518_data *data = gl518_update_device(dev); \
|
|
|
|
return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define show_fan(suffix, value, index) \
|
2005-05-17 04:41:35 -06:00
|
|
|
static ssize_t show_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \
|
2005-04-16 16:20:36 -06:00
|
|
|
{ \
|
|
|
|
struct gl518_data *data = gl518_update_device(dev); \
|
|
|
|
return sprintf(buf, "%d\n", FAN_FROM_REG(data->value[index], \
|
|
|
|
DIV_FROM_REG(data->fan_div[index]))); \
|
|
|
|
}
|
|
|
|
|
|
|
|
show(TEMP, temp_input1, temp_in);
|
|
|
|
show(TEMP, temp_max1, temp_max);
|
|
|
|
show(TEMP, temp_hyst1, temp_hyst);
|
|
|
|
show(BOOL, fan_auto1, fan_auto1);
|
|
|
|
show_fan(fan_input1, fan_in, 0);
|
|
|
|
show_fan(fan_input2, fan_in, 1);
|
|
|
|
show_fan(fan_min1, fan_min, 0);
|
|
|
|
show_fan(fan_min2, fan_min, 1);
|
|
|
|
show(DIV, fan_div1, fan_div[0]);
|
|
|
|
show(DIV, fan_div2, fan_div[1]);
|
|
|
|
show(VDD, in_input0, voltage_in[0]);
|
|
|
|
show(IN, in_input1, voltage_in[1]);
|
|
|
|
show(IN, in_input2, voltage_in[2]);
|
|
|
|
show(IN, in_input3, voltage_in[3]);
|
|
|
|
show(VDD, in_min0, voltage_min[0]);
|
|
|
|
show(IN, in_min1, voltage_min[1]);
|
|
|
|
show(IN, in_min2, voltage_min[2]);
|
|
|
|
show(IN, in_min3, voltage_min[3]);
|
|
|
|
show(VDD, in_max0, voltage_max[0]);
|
|
|
|
show(IN, in_max1, voltage_max[1]);
|
|
|
|
show(IN, in_max2, voltage_max[2]);
|
|
|
|
show(IN, in_max3, voltage_max[3]);
|
|
|
|
show(RAW, alarms, alarms);
|
|
|
|
show(BOOL, beep_enable, beep_enable);
|
|
|
|
show(BEEP_MASK, beep_mask, beep_mask);
|
|
|
|
|
|
|
|
#define set(type, suffix, value, reg) \
|
2005-05-17 04:41:35 -06:00
|
|
|
static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
|
2005-04-16 16:20:36 -06:00
|
|
|
size_t count) \
|
|
|
|
{ \
|
|
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
|
|
struct gl518_data *data = i2c_get_clientdata(client); \
|
|
|
|
long val = simple_strtol(buf, NULL, 10); \
|
|
|
|
\
|
|
|
|
down(&data->update_lock); \
|
|
|
|
data->value = type##_TO_REG(val); \
|
|
|
|
gl518_write_value(client, reg, data->value); \
|
|
|
|
up(&data->update_lock); \
|
|
|
|
return count; \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define set_bits(type, suffix, value, reg, mask, shift) \
|
2005-05-17 04:41:35 -06:00
|
|
|
static ssize_t set_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \
|
2005-04-16 16:20:36 -06:00
|
|
|
size_t count) \
|
|
|
|
{ \
|
|
|
|
struct i2c_client *client = to_i2c_client(dev); \
|
|
|
|
struct gl518_data *data = i2c_get_clientdata(client); \
|
|
|
|
int regvalue; \
|
|
|
|
unsigned long val = simple_strtoul(buf, NULL, 10); \
|
|
|
|
\
|
|
|
|
down(&data->update_lock); \
|
|
|
|
regvalue = gl518_read_value(client, reg); \
|
|
|
|
data->value = type##_TO_REG(val); \
|
|
|
|
regvalue = (regvalue & ~mask) | (data->value << shift); \
|
|
|
|
gl518_write_value(client, reg, regvalue); \
|
|
|
|
up(&data->update_lock); \
|
|
|
|
return count; \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define set_low(type, suffix, value, reg) \
|
|
|
|
set_bits(type, suffix, value, reg, 0x00ff, 0)
|
|
|
|
#define set_high(type, suffix, value, reg) \
|
|
|
|
set_bits(type, suffix, value, reg, 0xff00, 8)
|
|
|
|
|
|
|
|
set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
|
|
|
|
set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
|
|
|
|
set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
|
|
|
|
set_bits(DIV, fan_div1, fan_div[0], GL518_REG_MISC, 0xc0, 6);
|
|
|
|
set_bits(DIV, fan_div2, fan_div[1], GL518_REG_MISC, 0x30, 4);
|
|
|
|
set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
|
|
|
|
set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
|
|
|
|
set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
|
|
|
|
set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
|
|
|
|
set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
|
|
|
|
set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
|
|
|
|
set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
|
|
|
|
set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
|
|
|
|
set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
|
|
|
|
set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
|
|
|
|
|
2005-05-17 04:41:35 -06:00
|
|
|
static ssize_t set_fan_min1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
struct gl518_data *data = i2c_get_clientdata(client);
|
|
|
|
int regvalue;
|
|
|
|
unsigned long val = simple_strtoul(buf, NULL, 10);
|
|
|
|
|
|
|
|
down(&data->update_lock);
|
|
|
|
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
|
|
|
|
data->fan_min[0] = FAN_TO_REG(val,
|
|
|
|
DIV_FROM_REG(data->fan_div[0]));
|
|
|
|
regvalue = (regvalue & 0x00ff) | (data->fan_min[0] << 8);
|
|
|
|
gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
|
|
|
|
|
|
|
|
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
|
|
|
if (data->fan_min[0] == 0)
|
|
|
|
data->alarm_mask &= ~0x20;
|
|
|
|
else
|
|
|
|
data->alarm_mask |= 0x20;
|
|
|
|
data->beep_mask &= data->alarm_mask;
|
|
|
|
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
|
|
|
|
|
|
|
|
up(&data->update_lock);
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
2005-05-17 04:41:35 -06:00
|
|
|
static ssize_t set_fan_min2(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
2005-04-16 16:20:36 -06:00
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
struct gl518_data *data = i2c_get_clientdata(client);
|
|
|
|
int regvalue;
|
|
|
|
unsigned long val = simple_strtoul(buf, NULL, 10);
|
|
|
|
|
|
|
|
down(&data->update_lock);
|
|
|
|
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
|
|
|
|
data->fan_min[1] = FAN_TO_REG(val,
|
|
|
|
DIV_FROM_REG(data->fan_div[1]));
|
|
|
|
regvalue = (regvalue & 0xff00) | data->fan_min[1];
|
|
|
|
gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
|
|
|
|
|
|
|
|
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
|
|
|
if (data->fan_min[1] == 0)
|
|
|
|
data->alarm_mask &= ~0x40;
|
|
|
|
else
|
|
|
|
data->alarm_mask |= 0x40;
|
|
|
|
data->beep_mask &= data->alarm_mask;
|
|
|
|
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
|
|
|
|
|
|
|
|
up(&data->update_lock);
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
|
|
|
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
|
|
|
|
static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
|
|
|
|
static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
|
|
|
|
show_temp_hyst1, set_temp_hyst1);
|
|
|
|
static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
|
|
|
|
static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL);
|
|
|
|
static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL);
|
|
|
|
static DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO, show_fan_min1, set_fan_min1);
|
|
|
|
static DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO, show_fan_min2, set_fan_min2);
|
|
|
|
static DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO, show_fan_div1, set_fan_div1);
|
|
|
|
static DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO, show_fan_div2, set_fan_div2);
|
|
|
|
static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
|
|
|
|
static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
|
|
|
|
static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
|
|
|
|
static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
|
|
|
|
static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
|
|
|
|
static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
|
|
|
|
static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
|
|
|
|
static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
|
|
|
|
static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
|
|
|
|
static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
|
|
|
|
static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
|
|
|
|
static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
|
|
|
|
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
|
|
|
|
static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
|
|
|
|
show_beep_enable, set_beep_enable);
|
|
|
|
static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
|
|
|
|
show_beep_mask, set_beep_mask);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Real code
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int gl518_attach_adapter(struct i2c_adapter *adapter)
|
|
|
|
{
|
|
|
|
if (!(adapter->class & I2C_CLASS_HWMON))
|
|
|
|
return 0;
|
2005-07-31 13:42:02 -06:00
|
|
|
return i2c_probe(adapter, &addr_data, gl518_detect);
|
2005-04-16 16:20:36 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static int gl518_detect(struct i2c_adapter *adapter, int address, int kind)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
struct i2c_client *new_client;
|
|
|
|
struct gl518_data *data;
|
|
|
|
int err = 0;
|
|
|
|
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
|
|
goto exit;
|
|
|
|
|
|
|
|
/* OK. For now, we presume we have a valid client. We now create the
|
|
|
|
client structure, even though we cannot fill it completely yet.
|
|
|
|
But it allows us to access gl518_{read,write}_value. */
|
|
|
|
|
|
|
|
if (!(data = kmalloc(sizeof(struct gl518_data), GFP_KERNEL))) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto exit;
|
|
|
|
}
|
|
|
|
memset(data, 0, sizeof(struct gl518_data));
|
|
|
|
|
|
|
|
new_client = &data->client;
|
|
|
|
i2c_set_clientdata(new_client, data);
|
|
|
|
|
|
|
|
new_client->addr = address;
|
|
|
|
new_client->adapter = adapter;
|
|
|
|
new_client->driver = &gl518_driver;
|
|
|
|
new_client->flags = 0;
|
|
|
|
|
|
|
|
/* Now, we do the remaining detection. */
|
|
|
|
|
|
|
|
if (kind < 0) {
|
|
|
|
if ((gl518_read_value(new_client, GL518_REG_CHIP_ID) != 0x80)
|
|
|
|
|| (gl518_read_value(new_client, GL518_REG_CONF) & 0x80))
|
|
|
|
goto exit_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Determine the chip type. */
|
|
|
|
if (kind <= 0) {
|
|
|
|
i = gl518_read_value(new_client, GL518_REG_REVISION);
|
|
|
|
if (i == 0x00) {
|
|
|
|
kind = gl518sm_r00;
|
|
|
|
} else if (i == 0x80) {
|
|
|
|
kind = gl518sm_r80;
|
|
|
|
} else {
|
|
|
|
if (kind <= 0)
|
|
|
|
dev_info(&adapter->dev,
|
|
|
|
"Ignoring 'force' parameter for unknown "
|
|
|
|
"chip at adapter %d, address 0x%02x\n",
|
|
|
|
i2c_adapter_id(adapter), address);
|
|
|
|
goto exit_free;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fill in the remaining client fields */
|
|
|
|
strlcpy(new_client->name, "gl518sm", I2C_NAME_SIZE);
|
|
|
|
data->type = kind;
|
|
|
|
data->valid = 0;
|
|
|
|
init_MUTEX(&data->update_lock);
|
|
|
|
|
|
|
|
/* Tell the I2C layer a new client has arrived */
|
|
|
|
if ((err = i2c_attach_client(new_client)))
|
|
|
|
goto exit_free;
|
|
|
|
|
|
|
|
/* Initialize the GL518SM chip */
|
|
|
|
data->alarm_mask = 0xff;
|
|
|
|
data->voltage_in[0]=data->voltage_in[1]=data->voltage_in[2]=0;
|
|
|
|
gl518_init_client((struct i2c_client *) new_client);
|
|
|
|
|
|
|
|
/* Register sysfs hooks */
|
2005-07-15 19:39:18 -06:00
|
|
|
data->class_dev = hwmon_device_register(&new_client->dev);
|
|
|
|
if (IS_ERR(data->class_dev)) {
|
|
|
|
err = PTR_ERR(data->class_dev);
|
|
|
|
goto exit_detach;
|
|
|
|
}
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
device_create_file(&new_client->dev, &dev_attr_in0_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in1_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in2_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in3_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in0_min);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in1_min);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in2_min);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in3_min);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in0_max);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in1_max);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in2_max);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_in3_max);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_auto);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_min);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_min);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_fan1_div);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_fan2_div);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_input);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_max);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_alarms);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_beep_enable);
|
|
|
|
device_create_file(&new_client->dev, &dev_attr_beep_mask);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* OK, this is not exactly good programming practice, usually. But it is
|
|
|
|
very code-efficient in this case. */
|
|
|
|
|
2005-07-15 19:39:18 -06:00
|
|
|
exit_detach:
|
|
|
|
i2c_detach_client(new_client);
|
2005-04-16 16:20:36 -06:00
|
|
|
exit_free:
|
|
|
|
kfree(data);
|
|
|
|
exit:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* Called when we have found a new GL518SM.
|
|
|
|
Note that we preserve D4:NoFan2 and D2:beep_enable. */
|
|
|
|
static void gl518_init_client(struct i2c_client *client)
|
|
|
|
{
|
|
|
|
/* Make sure we leave D7:Reset untouched */
|
|
|
|
u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
|
|
|
|
|
|
|
|
/* Comparator mode (D3=0), standby mode (D6=0) */
|
|
|
|
gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
|
|
|
|
|
|
|
|
/* Never interrupts */
|
|
|
|
gl518_write_value(client, GL518_REG_MASK, 0x00);
|
|
|
|
|
|
|
|
/* Clear status register (D5=1), start (D6=1) */
|
|
|
|
gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
|
|
|
|
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int gl518_detach_client(struct i2c_client *client)
|
|
|
|
{
|
2005-07-15 19:39:18 -06:00
|
|
|
struct gl518_data *data = i2c_get_clientdata(client);
|
2005-04-16 16:20:36 -06:00
|
|
|
int err;
|
|
|
|
|
2005-07-15 19:39:18 -06:00
|
|
|
hwmon_device_unregister(data->class_dev);
|
|
|
|
|
2005-07-27 14:14:49 -06:00
|
|
|
if ((err = i2c_detach_client(client)))
|
2005-04-16 16:20:36 -06:00
|
|
|
return err;
|
|
|
|
|
2005-07-15 19:39:18 -06:00
|
|
|
kfree(data);
|
2005-04-16 16:20:36 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
|
|
|
|
GL518 uses a high-byte first convention, which is exactly opposite to
|
|
|
|
the usual practice. */
|
|
|
|
static int gl518_read_value(struct i2c_client *client, u8 reg)
|
|
|
|
{
|
|
|
|
if ((reg >= 0x07) && (reg <= 0x0c))
|
|
|
|
return swab16(i2c_smbus_read_word_data(client, reg));
|
|
|
|
else
|
|
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Registers 0x07 to 0x0c are word-sized, others are byte-sized
|
|
|
|
GL518 uses a high-byte first convention, which is exactly opposite to
|
|
|
|
the usual practice. */
|
|
|
|
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
|
|
|
|
{
|
|
|
|
if ((reg >= 0x07) && (reg <= 0x0c))
|
|
|
|
return i2c_smbus_write_word_data(client, reg, swab16(value));
|
|
|
|
else
|
|
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct gl518_data *gl518_update_device(struct device *dev)
|
|
|
|
{
|
|
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
struct gl518_data *data = i2c_get_clientdata(client);
|
|
|
|
int val;
|
|
|
|
|
|
|
|
down(&data->update_lock);
|
|
|
|
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|
|
|| !data->valid) {
|
|
|
|
dev_dbg(&client->dev, "Starting gl518 update\n");
|
|
|
|
|
|
|
|
data->alarms = gl518_read_value(client, GL518_REG_INT);
|
|
|
|
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
|
|
|
|
|
|
|
|
val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
|
|
|
|
data->voltage_min[0] = val & 0xff;
|
|
|
|
data->voltage_max[0] = (val >> 8) & 0xff;
|
|
|
|
val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
|
|
|
|
data->voltage_min[1] = val & 0xff;
|
|
|
|
data->voltage_max[1] = (val >> 8) & 0xff;
|
|
|
|
val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
|
|
|
|
data->voltage_min[2] = val & 0xff;
|
|
|
|
data->voltage_max[2] = (val >> 8) & 0xff;
|
|
|
|
val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
|
|
|
|
data->voltage_min[3] = val & 0xff;
|
|
|
|
data->voltage_max[3] = (val >> 8) & 0xff;
|
|
|
|
|
|
|
|
val = gl518_read_value(client, GL518_REG_FAN_COUNT);
|
|
|
|
data->fan_in[0] = (val >> 8) & 0xff;
|
|
|
|
data->fan_in[1] = val & 0xff;
|
|
|
|
|
|
|
|
val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
|
|
|
|
data->fan_min[0] = (val >> 8) & 0xff;
|
|
|
|
data->fan_min[1] = val & 0xff;
|
|
|
|
|
|
|
|
data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
|
|
|
|
data->temp_max =
|
|
|
|
gl518_read_value(client, GL518_REG_TEMP_MAX);
|
|
|
|
data->temp_hyst =
|
|
|
|
gl518_read_value(client, GL518_REG_TEMP_HYST);
|
|
|
|
|
|
|
|
val = gl518_read_value(client, GL518_REG_MISC);
|
|
|
|
data->fan_div[0] = (val >> 6) & 0x03;
|
|
|
|
data->fan_div[1] = (val >> 4) & 0x03;
|
|
|
|
data->fan_auto1 = (val >> 3) & 0x01;
|
|
|
|
|
|
|
|
data->alarms &= data->alarm_mask;
|
|
|
|
|
|
|
|
val = gl518_read_value(client, GL518_REG_CONF);
|
|
|
|
data->beep_enable = (val >> 2) & 1;
|
|
|
|
|
|
|
|
if (data->type != gl518sm_r00) {
|
|
|
|
data->voltage_in[0] =
|
|
|
|
gl518_read_value(client, GL518_REG_VDD);
|
|
|
|
data->voltage_in[1] =
|
|
|
|
gl518_read_value(client, GL518_REG_VIN1);
|
|
|
|
data->voltage_in[2] =
|
|
|
|
gl518_read_value(client, GL518_REG_VIN2);
|
|
|
|
}
|
|
|
|
data->voltage_in[3] =
|
|
|
|
gl518_read_value(client, GL518_REG_VIN3);
|
|
|
|
|
|
|
|
data->last_updated = jiffies;
|
|
|
|
data->valid = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
up(&data->update_lock);
|
|
|
|
|
|
|
|
return data;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init sensors_gl518sm_init(void)
|
|
|
|
{
|
|
|
|
return i2c_add_driver(&gl518_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit sensors_gl518sm_exit(void)
|
|
|
|
{
|
|
|
|
i2c_del_driver(&gl518_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
|
|
|
"Kyosti Malkki <kmalkki@cc.hut.fi> and "
|
|
|
|
"Hong-Gunn Chew <hglinux@gunnet.org>");
|
|
|
|
MODULE_DESCRIPTION("GL518SM driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
module_init(sensors_gl518sm_init);
|
|
|
|
module_exit(sensors_gl518sm_exit);
|