1
0
Fork 0
alistair23-linux/arch/powerpc/mm/numa.c

1628 lines
38 KiB
C
Raw Normal View History

/*
* pSeries NUMA support
*
* Copyright (C) 2002 Anton Blanchard <anton@au.ibm.com>, IBM
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#define pr_fmt(fmt) "numa: " fmt
#include <linux/threads.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:09:49 -06:00
#include <linux/memblock.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/export.h>
#include <linux/nodemask.h>
#include <linux/cpu.h>
#include <linux/notifier.h>
#include <linux/of.h>
powerpc/mm: Fix numa reserve bootmem page selection Fix the powerpc NUMA reserve bootmem page selection logic. commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb (powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes) changed the logic for how the powerpc LMB reserved regions were converted to bootmen reserved regions. As the folowing discussion reports, the new logic was not correct. mark_reserved_regions_for_nid() goes through each LMB on the system that specifies a reserved area. It searches for active regions that intersect with that LMB and are on the specified node. It attempts to bootmem-reserve only the area where the active region and the reserved LMB intersect. We can not reserve things on other nodes as they may not have bootmem structures allocated, yet. We base the size of the bootmem reservation on two possible things. Normally, we just make the reservation start and stop exactly at the start and end of the LMB. However, the LMB reservations are not aware of NUMA nodes and on occasion a single LMB may cross into several adjacent active regions. Those may even be on different NUMA nodes and will require separate calls to the bootmem reserve functions. So, the bootmem reservation must be trimmed to fit inside the current active region. That's all fine and dandy, but we trim the reservation in a page-aligned fashion. That's bad because we start the reservation at a non-page-aligned address: physbase. The reservation may only span 2 bytes, but that those bytes may span two pfns and cause a reserve_size of 2*PAGE_SIZE. Take the case where you reserve 0x2 bytes at 0x0fff and where the active region ends at 0x1000. You'll jump into that if() statment, but node_ar.end_pfn=0x1 and start_pfn=0x0. You'll end up with a reserve_size=0x1000, and then call reserve_bootmem_node(node, physbase=0xfff, size=0x1000); 0x1000 may not be on the same node as 0xfff. Oops. In almost all the vm code, end_<anything> is not inclusive. If you have an end_pfn of 0x1234, page 0x1234 is not included in the range. Using PFN_UP instead of the (>> >> PAGE_SHIFT) will make this consistent with the other VM code. We also need to do math for the reserved size with physbase instead of start_pfn. node_ar.end_pfn << PAGE_SHIFT is *precisely* the end of the node. However, (start_pfn << PAGE_SHIFT) is *NOT* precisely the beginning of the reserved area. That is, of course, physbase. If we don't use physbase here, the reserve_size can be made too large. From: Dave Hansen <dave@linux.vnet.ibm.com> Tested-by: Geoff Levand <geoffrey.levand@am.sony.com> Tested on PS3. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-12 05:36:04 -07:00
#include <linux/pfn.h>
#include <linux/cpuset.h>
#include <linux/node.h>
#include <linux/stop_machine.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/uaccess.h>
Merge branch 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Fixes and a lot of cleanups. Locking cleanup is finally complete. cgroup_mutex is no longer exposed to individual controlelrs which used to cause nasty deadlock issues. Li fixed and cleaned up quite a bit including long standing ones like racy cgroup_path(). - device cgroup now supports proper hierarchy thanks to Aristeu. - perf_event cgroup now supports proper hierarchy. - A new mount option "__DEVEL__sane_behavior" is added. As indicated by the name, this option is to be used for development only at this point and generates a warning message when used. Unfortunately, cgroup interface currently has too many brekages and inconsistencies to implement a consistent and unified hierarchy on top. The new flag is used to collect the behavior changes which are necessary to implement consistent unified hierarchy. It's likely that this flag won't be used verbatim when it becomes ready but will be enabled implicitly along with unified hierarchy. The option currently disables some of broken behaviors in cgroup core and also .use_hierarchy switch in memcg (will be routed through -mm), which can be used to make very unusual hierarchy where nesting is partially honored. It will also be used to implement hierarchy support for blk-throttle which would be impossible otherwise without introducing a full separate set of control knobs. This is essentially versioning of interface which isn't very nice but at this point I can't see any other options which would allow keeping the interface the same while moving towards hierarchy behavior which is at least somewhat sane. The planned unified hierarchy is likely to require some level of adaptation from userland anyway, so I think it'd be best to take the chance and update the interface such that it's supportable in the long term. Maintaining the existing interface does complicate cgroup core but shouldn't put too much strain on individual controllers and I think it'd be manageable for the foreseeable future. Maybe we'll be able to drop it in a decade. Fix up conflicts (including a semantic one adding a new #include to ppc that was uncovered by header the file changes) as per Tejun. * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (45 commits) cpuset: fix compile warning when CONFIG_SMP=n cpuset: fix cpu hotplug vs rebuild_sched_domains() race cpuset: use rebuild_sched_domains() in cpuset_hotplug_workfn() cgroup: restore the call to eventfd->poll() cgroup: fix use-after-free when umounting cgroupfs cgroup: fix broken file xattrs devcg: remove parent_cgroup. memcg: force use_hierarchy if sane_behavior cgroup: remove cgrp->top_cgroup cgroup: introduce sane_behavior mount option move cgroupfs_root to include/linux/cgroup.h cgroup: convert cgroupfs_root flag bits to masks and add CGRP_ prefix cgroup: make cgroup_path() not print double slashes Revert "cgroup: remove bind() method from cgroup_subsys." perf: make perf_event cgroup hierarchical cgroup: implement cgroup_is_descendant() cgroup: make sure parent won't be destroyed before its children cgroup: remove bind() method from cgroup_subsys. devcg: remove broken_hierarchy tag cgroup: remove cgroup_lock_is_held() ...
2013-04-29 20:14:20 -06:00
#include <linux/slab.h>
#include <asm/cputhreads.h>
#include <asm/sparsemem.h>
#include <asm/prom.h>
#include <asm/smp.h>
powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 04:35:34 -07:00
#include <asm/cputhreads.h>
#include <asm/topology.h>
#include <asm/firmware.h>
#include <asm/paca.h>
#include <asm/hvcall.h>
#include <asm/setup.h>
#include <asm/vdso.h>
#include <asm/drmem.h>
static int numa_enabled = 1;
static char *cmdline __initdata;
static int numa_debug;
#define dbg(args...) if (numa_debug) { printk(KERN_INFO args); }
int numa_cpu_lookup_table[NR_CPUS];
cpumask_var_t node_to_cpumask_map[MAX_NUMNODES];
struct pglist_data *node_data[MAX_NUMNODES];
EXPORT_SYMBOL(numa_cpu_lookup_table);
EXPORT_SYMBOL(node_to_cpumask_map);
EXPORT_SYMBOL(node_data);
static int min_common_depth;
static int n_mem_addr_cells, n_mem_size_cells;
static int form1_affinity;
#define MAX_DISTANCE_REF_POINTS 4
static int distance_ref_points_depth;
static const __be32 *distance_ref_points;
static int distance_lookup_table[MAX_NUMNODES][MAX_DISTANCE_REF_POINTS];
/*
* Allocate node_to_cpumask_map based on number of available nodes
* Requires node_possible_map to be valid.
*
* Note: cpumask_of_node() is not valid until after this is done.
*/
static void __init setup_node_to_cpumask_map(void)
{
unsigned int node;
/* setup nr_node_ids if not done yet */
if (nr_node_ids == MAX_NUMNODES)
setup_nr_node_ids();
/* allocate the map */
for_each_node(node)
alloc_bootmem_cpumask_var(&node_to_cpumask_map[node]);
/* cpumask_of_node() will now work */
dbg("Node to cpumask map for %d nodes\n", nr_node_ids);
}
static int __init fake_numa_create_new_node(unsigned long end_pfn,
unsigned int *nid)
{
unsigned long long mem;
char *p = cmdline;
static unsigned int fake_nid;
static unsigned long long curr_boundary;
/*
* Modify node id, iff we started creating NUMA nodes
* We want to continue from where we left of the last time
*/
if (fake_nid)
*nid = fake_nid;
/*
* In case there are no more arguments to parse, the
* node_id should be the same as the last fake node id
* (we've handled this above).
*/
if (!p)
return 0;
mem = memparse(p, &p);
if (!mem)
return 0;
if (mem < curr_boundary)
return 0;
curr_boundary = mem;
if ((end_pfn << PAGE_SHIFT) > mem) {
/*
* Skip commas and spaces
*/
while (*p == ',' || *p == ' ' || *p == '\t')
p++;
cmdline = p;
fake_nid++;
*nid = fake_nid;
dbg("created new fake_node with id %d\n", fake_nid);
return 1;
}
return 0;
}
powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 04:35:34 -07:00
static void reset_numa_cpu_lookup_table(void)
{
unsigned int cpu;
for_each_possible_cpu(cpu)
numa_cpu_lookup_table[cpu] = -1;
}
static void map_cpu_to_node(int cpu, int node)
{
update_numa_cpu_lookup_table(cpu, node);
dbg("adding cpu %d to node %d\n", cpu, node);
if (!(cpumask_test_cpu(cpu, node_to_cpumask_map[node])))
cpumask_set_cpu(cpu, node_to_cpumask_map[node]);
}
#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PPC_SPLPAR)
static void unmap_cpu_from_node(unsigned long cpu)
{
int node = numa_cpu_lookup_table[cpu];
dbg("removing cpu %lu from node %d\n", cpu, node);
if (cpumask_test_cpu(cpu, node_to_cpumask_map[node])) {
cpumask_clear_cpu(cpu, node_to_cpumask_map[node]);
} else {
printk(KERN_ERR "WARNING: cpu %lu not found in node %d\n",
cpu, node);
}
}
#endif /* CONFIG_HOTPLUG_CPU || CONFIG_PPC_SPLPAR */
/* must hold reference to node during call */
static const __be32 *of_get_associativity(struct device_node *dev)
{
return of_get_property(dev, "ibm,associativity", NULL);
}
int __node_distance(int a, int b)
{
int i;
int distance = LOCAL_DISTANCE;
if (!form1_affinity)
return ((a == b) ? LOCAL_DISTANCE : REMOTE_DISTANCE);
for (i = 0; i < distance_ref_points_depth; i++) {
if (distance_lookup_table[a][i] == distance_lookup_table[b][i])
break;
/* Double the distance for each NUMA level */
distance *= 2;
}
return distance;
}
EXPORT_SYMBOL(__node_distance);
static void initialize_distance_lookup_table(int nid,
const __be32 *associativity)
{
int i;
if (!form1_affinity)
return;
for (i = 0; i < distance_ref_points_depth; i++) {
const __be32 *entry;
entry = &associativity[be32_to_cpu(distance_ref_points[i]) - 1];
distance_lookup_table[nid][i] = of_read_number(entry, 1);
}
}
/* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa
* info is found.
*/
static int associativity_to_nid(const __be32 *associativity)
{
int nid = -1;
if (min_common_depth == -1)
goto out;
if (of_read_number(associativity, 1) >= min_common_depth)
nid = of_read_number(&associativity[min_common_depth], 1);
/* POWER4 LPAR uses 0xffff as invalid node */
if (nid == 0xffff || nid >= MAX_NUMNODES)
nid = -1;
if (nid > 0 &&
of_read_number(associativity, 1) >= distance_ref_points_depth) {
/*
* Skip the length field and send start of associativity array
*/
initialize_distance_lookup_table(nid, associativity + 1);
}
out:
return nid;
}
/* Returns the nid associated with the given device tree node,
* or -1 if not found.
*/
static int of_node_to_nid_single(struct device_node *device)
{
int nid = -1;
const __be32 *tmp;
tmp = of_get_associativity(device);
if (tmp)
nid = associativity_to_nid(tmp);
return nid;
}
/* Walk the device tree upwards, looking for an associativity id */
int of_node_to_nid(struct device_node *device)
{
int nid = -1;
of_node_get(device);
while (device) {
nid = of_node_to_nid_single(device);
if (nid != -1)
break;
device = of_get_next_parent(device);
}
of_node_put(device);
return nid;
}
EXPORT_SYMBOL(of_node_to_nid);
static int __init find_min_common_depth(void)
{
int depth;
struct device_node *root;
if (firmware_has_feature(FW_FEATURE_OPAL))
root = of_find_node_by_path("/ibm,opal");
else
root = of_find_node_by_path("/rtas");
if (!root)
root = of_find_node_by_path("/");
/*
* This property is a set of 32-bit integers, each representing
* an index into the ibm,associativity nodes.
*
* With form 0 affinity the first integer is for an SMP configuration
* (should be all 0's) and the second is for a normal NUMA
* configuration. We have only one level of NUMA.
*
* With form 1 affinity the first integer is the most significant
* NUMA boundary and the following are progressively less significant
* boundaries. There can be more than one level of NUMA.
*/
distance_ref_points = of_get_property(root,
"ibm,associativity-reference-points",
&distance_ref_points_depth);
if (!distance_ref_points) {
dbg("NUMA: ibm,associativity-reference-points not found.\n");
goto err;
}
distance_ref_points_depth /= sizeof(int);
if (firmware_has_feature(FW_FEATURE_OPAL) ||
firmware_has_feature(FW_FEATURE_TYPE1_AFFINITY)) {
dbg("Using form 1 affinity\n");
form1_affinity = 1;
}
if (form1_affinity) {
depth = of_read_number(distance_ref_points, 1);
} else {
if (distance_ref_points_depth < 2) {
printk(KERN_WARNING "NUMA: "
"short ibm,associativity-reference-points\n");
goto err;
}
depth = of_read_number(&distance_ref_points[1], 1);
}
/*
* Warn and cap if the hardware supports more than
* MAX_DISTANCE_REF_POINTS domains.
*/
if (distance_ref_points_depth > MAX_DISTANCE_REF_POINTS) {
printk(KERN_WARNING "NUMA: distance array capped at "
"%d entries\n", MAX_DISTANCE_REF_POINTS);
distance_ref_points_depth = MAX_DISTANCE_REF_POINTS;
}
of_node_put(root);
return depth;
err:
of_node_put(root);
return -1;
}
static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells)
{
struct device_node *memory = NULL;
memory = of_find_node_by_type(memory, "memory");
if (!memory)
panic("numa.c: No memory nodes found!");
*n_addr_cells = of_n_addr_cells(memory);
*n_size_cells = of_n_size_cells(memory);
of_node_put(memory);
}
static unsigned long read_n_cells(int n, const __be32 **buf)
{
unsigned long result = 0;
while (n--) {
result = (result << 32) | of_read_number(*buf, 1);
(*buf)++;
}
return result;
}
struct assoc_arrays {
u32 n_arrays;
u32 array_sz;
const __be32 *arrays;
};
/*
* Retrieve and validate the list of associativity arrays for drconf
* memory from the ibm,associativity-lookup-arrays property of the
* device tree..
*
* The layout of the ibm,associativity-lookup-arrays property is a number N
* indicating the number of associativity arrays, followed by a number M
* indicating the size of each associativity array, followed by a list
* of N associativity arrays.
*/
static int of_get_assoc_arrays(struct assoc_arrays *aa)
{
struct device_node *memory;
const __be32 *prop;
u32 len;
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (!memory)
return -1;
prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len);
if (!prop || len < 2 * sizeof(unsigned int)) {
of_node_put(memory);
return -1;
}
aa->n_arrays = of_read_number(prop++, 1);
aa->array_sz = of_read_number(prop++, 1);
of_node_put(memory);
/* Now that we know the number of arrays and size of each array,
* revalidate the size of the property read in.
*/
if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
return -1;
aa->arrays = prop;
return 0;
}
/*
* This is like of_node_to_nid_single() for memory represented in the
* ibm,dynamic-reconfiguration-memory node.
*/
static int of_drconf_to_nid_single(struct drmem_lmb *lmb)
{
struct assoc_arrays aa = { .arrays = NULL };
int default_nid = 0;
int nid = default_nid;
int rc, index;
rc = of_get_assoc_arrays(&aa);
if (rc)
return default_nid;
if (min_common_depth > 0 && min_common_depth <= aa.array_sz &&
!(lmb->flags & DRCONF_MEM_AI_INVALID) &&
lmb->aa_index < aa.n_arrays) {
index = lmb->aa_index * aa.array_sz + min_common_depth - 1;
nid = of_read_number(&aa.arrays[index], 1);
if (nid == 0xffff || nid >= MAX_NUMNODES)
nid = default_nid;
if (nid > 0) {
index = lmb->aa_index * aa.array_sz;
initialize_distance_lookup_table(nid,
&aa.arrays[index]);
}
}
return nid;
}
/*
* Figure out to which domain a cpu belongs and stick it there.
* Return the id of the domain used.
*/
static int numa_setup_cpu(unsigned long lcpu)
{
int nid = -1;
powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 04:35:34 -07:00
struct device_node *cpu;
/*
* If a valid cpu-to-node mapping is already available, use it
* directly instead of querying the firmware, since it represents
* the most recent mapping notified to us by the platform (eg: VPHN).
*/
if ((nid = numa_cpu_lookup_table[lcpu]) >= 0) {
map_cpu_to_node(lcpu, nid);
return nid;
}
cpu = of_get_cpu_node(lcpu, NULL);
if (!cpu) {
WARN_ON(1);
if (cpu_present(lcpu))
goto out_present;
else
goto out;
}
nid = of_node_to_nid_single(cpu);
out_present:
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
if (nid < 0 || !node_possible(nid))
nid = first_online_node;
map_cpu_to_node(lcpu, nid);
of_node_put(cpu);
out:
return nid;
}
static void verify_cpu_node_mapping(int cpu, int node)
{
int base, sibling, i;
/* Verify that all the threads in the core belong to the same node */
base = cpu_first_thread_sibling(cpu);
for (i = 0; i < threads_per_core; i++) {
sibling = base + i;
if (sibling == cpu || cpu_is_offline(sibling))
continue;
if (cpu_to_node(sibling) != node) {
WARN(1, "CPU thread siblings %d and %d don't belong"
" to the same node!\n", cpu, sibling);
break;
}
}
}
/* Must run before sched domains notifier. */
static int ppc_numa_cpu_prepare(unsigned int cpu)
{
int nid;
nid = numa_setup_cpu(cpu);
verify_cpu_node_mapping(cpu, nid);
return 0;
}
static int ppc_numa_cpu_dead(unsigned int cpu)
{
#ifdef CONFIG_HOTPLUG_CPU
unmap_cpu_from_node(cpu);
#endif
return 0;
}
/*
* Check and possibly modify a memory region to enforce the memory limit.
*
* Returns the size the region should have to enforce the memory limit.
* This will either be the original value of size, a truncated value,
* or zero. If the returned value of size is 0 the region should be
* discarded as it lies wholly above the memory limit.
*/
static unsigned long __init numa_enforce_memory_limit(unsigned long start,
unsigned long size)
{
/*
* We use memblock_end_of_DRAM() in here instead of memory_limit because
* we've already adjusted it for the limit and it takes care of
* having memory holes below the limit. Also, in the case of
* iommu_is_off, memory_limit is not set but is implicitly enforced.
*/
if (start + size <= memblock_end_of_DRAM())
return size;
if (start >= memblock_end_of_DRAM())
return 0;
return memblock_end_of_DRAM() - start;
}
/*
* Reads the counter for a given entry in
* linux,drconf-usable-memory property
*/
static inline int __init read_usm_ranges(const __be32 **usm)
{
/*
* For each lmb in ibm,dynamic-memory a corresponding
* entry in linux,drconf-usable-memory property contains
* a counter followed by that many (base, size) duple.
* read the counter from linux,drconf-usable-memory
*/
return read_n_cells(n_mem_size_cells, usm);
}
/*
* Extract NUMA information from the ibm,dynamic-reconfiguration-memory
* node. This assumes n_mem_{addr,size}_cells have been set.
*/
static void __init numa_setup_drmem_lmb(struct drmem_lmb *lmb,
const __be32 **usm)
{
unsigned int ranges, is_kexec_kdump = 0;
unsigned long base, size, sz;
int nid;
/*
* Skip this block if the reserved bit is set in flags (0x80)
* or if the block is not assigned to this partition (0x8)
*/
if ((lmb->flags & DRCONF_MEM_RESERVED)
|| !(lmb->flags & DRCONF_MEM_ASSIGNED))
return;
if (*usm)
is_kexec_kdump = 1;
base = lmb->base_addr;
size = drmem_lmb_size();
ranges = 1;
if (is_kexec_kdump) {
ranges = read_usm_ranges(usm);
if (!ranges) /* there are no (base, size) duple */
return;
}
do {
if (is_kexec_kdump) {
base = read_n_cells(n_mem_addr_cells, usm);
size = read_n_cells(n_mem_size_cells, usm);
}
nid = of_drconf_to_nid_single(lmb);
fake_numa_create_new_node(((base + size) >> PAGE_SHIFT),
&nid);
node_set_online(nid);
sz = numa_enforce_memory_limit(base, size);
if (sz)
memblock_set_node(base, sz, &memblock.memory, nid);
} while (--ranges);
}
static int __init parse_numa_properties(void)
{
struct device_node *memory;
int default_nid = 0;
unsigned long i;
if (numa_enabled == 0) {
printk(KERN_WARNING "NUMA disabled by user\n");
return -1;
}
min_common_depth = find_min_common_depth();
if (min_common_depth < 0)
return min_common_depth;
dbg("NUMA associativity depth for CPU/Memory: %d\n", min_common_depth);
/*
* Even though we connect cpus to numa domains later in SMP
* init, we need to know the node ids now. This is because
* each node to be onlined must have NODE_DATA etc backing it.
*/
for_each_present_cpu(i) {
struct device_node *cpu;
int nid;
cpu = of_get_cpu_node(i, NULL);
BUG_ON(!cpu);
nid = of_node_to_nid_single(cpu);
of_node_put(cpu);
/*
* Don't fall back to default_nid yet -- we will plug
* cpus into nodes once the memory scan has discovered
* the topology.
*/
if (nid < 0)
continue;
node_set_online(nid);
}
get_n_mem_cells(&n_mem_addr_cells, &n_mem_size_cells);
for_each_node_by_type(memory, "memory") {
unsigned long start;
unsigned long size;
int nid;
int ranges;
const __be32 *memcell_buf;
unsigned int len;
memcell_buf = of_get_property(memory,
"linux,usable-memory", &len);
if (!memcell_buf || len <= 0)
memcell_buf = of_get_property(memory, "reg", &len);
if (!memcell_buf || len <= 0)
continue;
/* ranges in cell */
ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
new_range:
/* these are order-sensitive, and modify the buffer pointer */
start = read_n_cells(n_mem_addr_cells, &memcell_buf);
size = read_n_cells(n_mem_size_cells, &memcell_buf);
/*
* Assumption: either all memory nodes or none will
* have associativity properties. If none, then
* everything goes to default_nid.
*/
nid = of_node_to_nid_single(memory);
if (nid < 0)
nid = default_nid;
fake_numa_create_new_node(((start + size) >> PAGE_SHIFT), &nid);
node_set_online(nid);
size = numa_enforce_memory_limit(start, size);
if (size)
memblock_set_node(start, size, &memblock.memory, nid);
if (--ranges)
goto new_range;
}
/*
* Now do the same thing for each MEMBLOCK listed in the
* ibm,dynamic-memory property in the
* ibm,dynamic-reconfiguration-memory node.
*/
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (memory) {
walk_drmem_lmbs(memory, numa_setup_drmem_lmb);
of_node_put(memory);
}
return 0;
}
static void __init setup_nonnuma(void)
{
unsigned long top_of_ram = memblock_end_of_DRAM();
unsigned long total_ram = memblock_phys_mem_size();
unsigned long start_pfn, end_pfn;
unsigned int nid = 0;
struct memblock_region *reg;
printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
for_each_memblock(memory, reg) {
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
fake_numa_create_new_node(end_pfn, &nid);
memblock_set_node(PFN_PHYS(start_pfn),
PFN_PHYS(end_pfn - start_pfn),
&memblock.memory, nid);
node_set_online(nid);
}
}
void __init dump_numa_cpu_topology(void)
{
unsigned int node;
unsigned int cpu, count;
if (min_common_depth == -1 || !numa_enabled)
return;
for_each_online_node(node) {
pr_info("Node %d CPUs:", node);
count = 0;
/*
* If we used a CPU iterator here we would miss printing
* the holes in the cpumap.
*/
for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
if (cpumask_test_cpu(cpu,
node_to_cpumask_map[node])) {
if (count == 0)
pr_cont(" %u", cpu);
++count;
} else {
if (count > 1)
pr_cont("-%u", cpu - 1);
count = 0;
}
}
if (count > 1)
pr_cont("-%u", nr_cpu_ids - 1);
pr_cont("\n");
}
}
/* Initialize NODE_DATA for a node on the local memory */
static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-24 05:02:35 -07:00
{
u64 spanned_pages = end_pfn - start_pfn;
const size_t nd_size = roundup(sizeof(pg_data_t), SMP_CACHE_BYTES);
u64 nd_pa;
void *nd;
int tnid;
powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-24 05:02:35 -07:00
memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc* Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 16:07:59 -06:00
nd_pa = memblock_phys_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);
nd = __va(nd_pa);
powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-24 05:02:35 -07:00
/* report and initialize */
pr_info(" NODE_DATA [mem %#010Lx-%#010Lx]\n",
nd_pa, nd_pa + nd_size - 1);
tnid = early_pfn_to_nid(nd_pa >> PAGE_SHIFT);
if (tnid != nid)
pr_info(" NODE_DATA(%d) on node %d\n", nid, tnid);
powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-24 05:02:35 -07:00
node_data[nid] = nd;
memset(NODE_DATA(nid), 0, sizeof(pg_data_t));
NODE_DATA(nid)->node_id = nid;
NODE_DATA(nid)->node_start_pfn = start_pfn;
NODE_DATA(nid)->node_spanned_pages = spanned_pages;
}
powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-24 05:02:35 -07:00
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes On powerpc systems which allow 'hot-add' of CPU or memory resources, it may occur that the new resources are to be inserted into nodes that were not used for these resources at bootup. In the kernel, any node that is used must be defined and initialized. These empty nodes may occur when, * Dedicated vs. shared resources. Shared resources require information such as the VPHN hcall for CPU assignment to nodes. Associativity decisions made based on dedicated resource rules, such as associativity properties in the device tree, may vary from decisions made using the values returned by the VPHN hcall. * memoryless nodes at boot. Nodes need to be defined as 'possible' at boot for operation with other code modules. Previously, the powerpc code would limit the set of possible nodes to those which have memory assigned at boot, and were thus online. Subsequent add/remove of CPUs or memory would only work with this subset of possible nodes. * memoryless nodes with CPUs at boot. Due to the previous restriction on nodes, nodes that had CPUs but no memory were being collapsed into other nodes that did have memory at boot. In practice this meant that the node assignment presented by the runtime kernel differed from the affinity and associativity attributes presented by the device tree or VPHN hcalls. Nodes that might be known to the pHyp were not 'possible' in the runtime kernel because they did not have memory at boot. This patch ensures that sufficient nodes are defined to support configuration requirements after boot, as well as at boot. This patch set fixes a couple of problems. * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting to one of the set of nodes that were known to have memory at boot. This patch extracts the value of the lowest domain level (number of allocable resources) from the device tree property "ibm,max-associativity-domains" to use as the maximum number of nodes to setup as possibly available in the system. This new setting will override the instruction: nodes_and(node_possible_map, node_possible_map, node_online_map); presently seen in the function arch/powerpc/mm/numa.c:initmem_init(). If the "ibm,max-associativity-domains" property is not present at boot, no operation will be performed to define or enable additional nodes, or enable the above 'nodes_and()'. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:36 -07:00
static void __init find_possible_nodes(void)
{
struct device_node *rtas;
u32 numnodes, i;
if (min_common_depth <= 0)
return;
rtas = of_find_node_by_path("/rtas");
if (!rtas)
return;
if (of_property_read_u32_index(rtas,
"ibm,max-associativity-domains",
min_common_depth, &numnodes))
goto out;
for (i = 0; i < numnodes; i++) {
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
if (!node_possible(i))
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes On powerpc systems which allow 'hot-add' of CPU or memory resources, it may occur that the new resources are to be inserted into nodes that were not used for these resources at bootup. In the kernel, any node that is used must be defined and initialized. These empty nodes may occur when, * Dedicated vs. shared resources. Shared resources require information such as the VPHN hcall for CPU assignment to nodes. Associativity decisions made based on dedicated resource rules, such as associativity properties in the device tree, may vary from decisions made using the values returned by the VPHN hcall. * memoryless nodes at boot. Nodes need to be defined as 'possible' at boot for operation with other code modules. Previously, the powerpc code would limit the set of possible nodes to those which have memory assigned at boot, and were thus online. Subsequent add/remove of CPUs or memory would only work with this subset of possible nodes. * memoryless nodes with CPUs at boot. Due to the previous restriction on nodes, nodes that had CPUs but no memory were being collapsed into other nodes that did have memory at boot. In practice this meant that the node assignment presented by the runtime kernel differed from the affinity and associativity attributes presented by the device tree or VPHN hcalls. Nodes that might be known to the pHyp were not 'possible' in the runtime kernel because they did not have memory at boot. This patch ensures that sufficient nodes are defined to support configuration requirements after boot, as well as at boot. This patch set fixes a couple of problems. * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting to one of the set of nodes that were known to have memory at boot. This patch extracts the value of the lowest domain level (number of allocable resources) from the device tree property "ibm,max-associativity-domains" to use as the maximum number of nodes to setup as possibly available in the system. This new setting will override the instruction: nodes_and(node_possible_map, node_possible_map, node_online_map); presently seen in the function arch/powerpc/mm/numa.c:initmem_init(). If the "ibm,max-associativity-domains" property is not present at boot, no operation will be performed to define or enable additional nodes, or enable the above 'nodes_and()'. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:36 -07:00
node_set(i, node_possible_map);
}
out:
of_node_put(rtas);
}
void __init mem_topology_setup(void)
{
int cpu;
if (parse_numa_properties())
setup_nonnuma();
/*
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes On powerpc systems which allow 'hot-add' of CPU or memory resources, it may occur that the new resources are to be inserted into nodes that were not used for these resources at bootup. In the kernel, any node that is used must be defined and initialized. These empty nodes may occur when, * Dedicated vs. shared resources. Shared resources require information such as the VPHN hcall for CPU assignment to nodes. Associativity decisions made based on dedicated resource rules, such as associativity properties in the device tree, may vary from decisions made using the values returned by the VPHN hcall. * memoryless nodes at boot. Nodes need to be defined as 'possible' at boot for operation with other code modules. Previously, the powerpc code would limit the set of possible nodes to those which have memory assigned at boot, and were thus online. Subsequent add/remove of CPUs or memory would only work with this subset of possible nodes. * memoryless nodes with CPUs at boot. Due to the previous restriction on nodes, nodes that had CPUs but no memory were being collapsed into other nodes that did have memory at boot. In practice this meant that the node assignment presented by the runtime kernel differed from the affinity and associativity attributes presented by the device tree or VPHN hcalls. Nodes that might be known to the pHyp were not 'possible' in the runtime kernel because they did not have memory at boot. This patch ensures that sufficient nodes are defined to support configuration requirements after boot, as well as at boot. This patch set fixes a couple of problems. * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting to one of the set of nodes that were known to have memory at boot. This patch extracts the value of the lowest domain level (number of allocable resources) from the device tree property "ibm,max-associativity-domains" to use as the maximum number of nodes to setup as possibly available in the system. This new setting will override the instruction: nodes_and(node_possible_map, node_possible_map, node_online_map); presently seen in the function arch/powerpc/mm/numa.c:initmem_init(). If the "ibm,max-associativity-domains" property is not present at boot, no operation will be performed to define or enable additional nodes, or enable the above 'nodes_and()'. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:36 -07:00
* Modify the set of possible NUMA nodes to reflect information
* available about the set of online nodes, and the set of nodes
* that we expect to make use of for this platform's affinity
* calculations.
*/
nodes_and(node_possible_map, node_possible_map, node_online_map);
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes On powerpc systems which allow 'hot-add' of CPU or memory resources, it may occur that the new resources are to be inserted into nodes that were not used for these resources at bootup. In the kernel, any node that is used must be defined and initialized. These empty nodes may occur when, * Dedicated vs. shared resources. Shared resources require information such as the VPHN hcall for CPU assignment to nodes. Associativity decisions made based on dedicated resource rules, such as associativity properties in the device tree, may vary from decisions made using the values returned by the VPHN hcall. * memoryless nodes at boot. Nodes need to be defined as 'possible' at boot for operation with other code modules. Previously, the powerpc code would limit the set of possible nodes to those which have memory assigned at boot, and were thus online. Subsequent add/remove of CPUs or memory would only work with this subset of possible nodes. * memoryless nodes with CPUs at boot. Due to the previous restriction on nodes, nodes that had CPUs but no memory were being collapsed into other nodes that did have memory at boot. In practice this meant that the node assignment presented by the runtime kernel differed from the affinity and associativity attributes presented by the device tree or VPHN hcalls. Nodes that might be known to the pHyp were not 'possible' in the runtime kernel because they did not have memory at boot. This patch ensures that sufficient nodes are defined to support configuration requirements after boot, as well as at boot. This patch set fixes a couple of problems. * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting to one of the set of nodes that were known to have memory at boot. This patch extracts the value of the lowest domain level (number of allocable resources) from the device tree property "ibm,max-associativity-domains" to use as the maximum number of nodes to setup as possibly available in the system. This new setting will override the instruction: nodes_and(node_possible_map, node_possible_map, node_online_map); presently seen in the function arch/powerpc/mm/numa.c:initmem_init(). If the "ibm,max-associativity-domains" property is not present at boot, no operation will be performed to define or enable additional nodes, or enable the above 'nodes_and()'. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:36 -07:00
find_possible_nodes();
setup_node_to_cpumask_map();
reset_numa_cpu_lookup_table();
for_each_present_cpu(cpu)
numa_setup_cpu(cpu);
}
void __init initmem_init(void)
{
int nid;
max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
max_pfn = max_low_pfn;
memblock_dump_all();
for_each_online_node(nid) {
unsigned long start_pfn, end_pfn;
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
setup_node_data(nid, start_pfn, end_pfn);
powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes If there are multiple reserved memory blocks via lmb_reserve() that are contiguous addresses and on different NUMA nodes we are losing track of which address ranges to reserve in bootmem on which node. I discovered this when I recently got to try 16GB huge pages on a system with more then 2 nodes. When scanning the device tree in early boot we call lmb_reserve() with the addresses of the 16G pages that we find so that the memory doesn't get used for something else. For example the addresses for the pages could be 4000000000, 4400000000, 4800000000, 4C00000000, etc - 8 pages, one on each of eight nodes. In the lmb after all the pages have been reserved it will look something like the following: lmb_dump_all: memory.cnt = 0x2 memory.size = 0x3e80000000 memory.region[0x0].base = 0x0 .size = 0x1e80000000 memory.region[0x1].base = 0x4000000000 .size = 0x2000000000 reserved.cnt = 0x5 reserved.size = 0x3e80000000 reserved.region[0x0].base = 0x0 .size = 0x7b5000 reserved.region[0x1].base = 0x2a00000 .size = 0x78c000 reserved.region[0x2].base = 0x328c000 .size = 0x43000 reserved.region[0x3].base = 0xf4e8000 .size = 0xb18000 reserved.region[0x4].base = 0x4000000000 .size = 0x2000000000 The reserved.region[0x4] contains the 16G pages. In arch/powerpc/mm/num.c: do_init_bootmem() we loop through each of the node numbers looking for the reserved regions that belong to the particular node. It is not able to identify region 0x4 as being a part of each of the 8 nodes. It is assuming that a reserved region is only on a single node. This patch takes out the reserved region loop from inside the loop that goes over each node. It looks up the active region containing the start of the reserved region. If it extends past that active region then it adjusts the size and gets the next active region containing it. Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-10-09 04:18:40 -06:00
sparse_memory_present_with_active_regions(nid);
powerpc: Fix boot freeze on machine with empty memory node I got a bug report about a distro kernel not booting on a particular machine. It would freeze during boot: > ... > Could not find start_pfn for node 1 > [boot]0015 Setup Done > Built 2 zonelists in Node order, mobility grouping on. Total pages: 123783 > Policy zone: DMA > Kernel command line: > [boot]0020 XICS Init > [boot]0021 XICS Done > PID hash table entries: 4096 (order: 12, 32768 bytes) > clocksource: timebase mult[7d0000] shift[22] registered > Console: colour dummy device 80x25 > console handover: boot [udbg0] -> real [hvc0] > Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes) > Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes) > freeing bootmem node 0 I've reproduced this on 2.6.27.7. It is caused by commit 8f64e1f2d1e09267ac926e15090fd505c1c0cbcb ("powerpc: Reserve in bootmem lmb reserved regions that cross NUMA nodes"). The problem is that Jon took a loop which was (in pseudocode): for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); reserve_node_bootmem(nid); and broke it up into: for_each_node(nid) NODE_DATA(nid) = careful_alloc(nid); setup_bootmem(nid); for_each_node(nid) reserve_node_bootmem(nid); The issue comes in when the 'careful_alloc()' is called on a node with no memory. It falls back to using bootmem from a previously-initialized node. But, bootmem has not yet been reserved when Jon's patch is applied. It gives back bogus memory (0xc000000000000000) and pukes later in boot. The following patch collapses the loop back together. It also breaks the mark_reserved_regions_for_nid() code out into a function and adds some comments. I think a huge part of introducing this bug is because for loop was too long and hard to read. The actual bug fix here is the: + if (end_pfn <= node->node_start_pfn || + start_pfn >= node_end_pfn) + continue; Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-24 05:02:35 -07:00
}
sparse_init();
powerpc: reorder per-cpu NUMA information's initialization There is an issue currently where NUMA information is used on powerpc (and possibly ia64) before it has been read from the device-tree, which leads to large slab consumption with CONFIG_SLUB and memoryless nodes. NUMA powerpc non-boot CPU's cpu_to_node/cpu_to_mem is only accurate after start_secondary(), similar to ia64, which is invoked via smp_init(). Commit 6ee0578b4daae ("workqueue: mark init_workqueues() as early_initcall()") made init_workqueues() be invoked via do_pre_smp_initcalls(), which is obviously before the secondary processors are online. Additionally, the following commits changed init_workqueues() to use cpu_to_node to determine the node to use for kthread_create_on_node: bce903809ab3f ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") f3f90ad469342 ("workqueue: determine NUMA node of workers accourding to the allowed cpumask") Therefore, when init_workqueues() runs, it sees all CPUs as being on Node 0. On LPARs or KVM guests where Node 0 is memoryless, this leads to a high number of slab deactivations (http://www.spinics.net/lists/linux-mm/msg67489.html). Fix this by initializing the powerpc-specific CPU<->node/local memory node mapping as early as possible, which on powerpc is do_init_bootmem(). Currently that function initializes the mapping for the boot CPU, but we extend it to setup the mapping for all possible CPUs. Then, in smp_prepare_cpus(), we can correspondingly set the per-cpu values for all possible CPUs. That ensures that before the early_initcalls run (and really as early as possible), the per-cpu NUMA mapping is accurate. While testing memoryless nodes on PowerKVM guests with a fix to the workqueue logic to use cpu_to_mem() instead of cpu_to_node(), with a guest topology of: available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 node 1 size: 16336 MB node 1 free: 15329 MB node distances: node 0 1 0: 10 40 1: 40 10 the slab consumption decreases from Slab: 932416 kB SUnreclaim: 902336 kB to Slab: 395264 kB SUnreclaim: 359424 kB And we a corresponding increase in the slab efficiency from slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 337 MB 11.28% 100.00% task_struct 288 MB 9.93% 100.00% to slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 37 MB 100.00% 100.00% task_struct 31 MB 100.00% 100.00% Powerpc didn't support memoryless nodes until recently (64bb80d87f01 "powerpc/numa: Enable CONFIG_HAVE_MEMORYLESS_NODES" and 8c272261194d "powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"). Those commits also helped improve memory consumption with these kind of environments. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-17 17:15:12 -06:00
/*
* We need the numa_cpu_lookup_table to be accurate for all CPUs,
* even before we online them, so that we can use cpu_to_{node,mem}
* early in boot, cf. smp_prepare_cpus().
* _nocalls() + manual invocation is used because cpuhp is not yet
* initialized for the boot CPU.
powerpc: reorder per-cpu NUMA information's initialization There is an issue currently where NUMA information is used on powerpc (and possibly ia64) before it has been read from the device-tree, which leads to large slab consumption with CONFIG_SLUB and memoryless nodes. NUMA powerpc non-boot CPU's cpu_to_node/cpu_to_mem is only accurate after start_secondary(), similar to ia64, which is invoked via smp_init(). Commit 6ee0578b4daae ("workqueue: mark init_workqueues() as early_initcall()") made init_workqueues() be invoked via do_pre_smp_initcalls(), which is obviously before the secondary processors are online. Additionally, the following commits changed init_workqueues() to use cpu_to_node to determine the node to use for kthread_create_on_node: bce903809ab3f ("workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[]") f3f90ad469342 ("workqueue: determine NUMA node of workers accourding to the allowed cpumask") Therefore, when init_workqueues() runs, it sees all CPUs as being on Node 0. On LPARs or KVM guests where Node 0 is memoryless, this leads to a high number of slab deactivations (http://www.spinics.net/lists/linux-mm/msg67489.html). Fix this by initializing the powerpc-specific CPU<->node/local memory node mapping as early as possible, which on powerpc is do_init_bootmem(). Currently that function initializes the mapping for the boot CPU, but we extend it to setup the mapping for all possible CPUs. Then, in smp_prepare_cpus(), we can correspondingly set the per-cpu values for all possible CPUs. That ensures that before the early_initcalls run (and really as early as possible), the per-cpu NUMA mapping is accurate. While testing memoryless nodes on PowerKVM guests with a fix to the workqueue logic to use cpu_to_mem() instead of cpu_to_node(), with a guest topology of: available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 node 1 size: 16336 MB node 1 free: 15329 MB node distances: node 0 1 0: 10 40 1: 40 10 the slab consumption decreases from Slab: 932416 kB SUnreclaim: 902336 kB to Slab: 395264 kB SUnreclaim: 359424 kB And we a corresponding increase in the slab efficiency from slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 337 MB 11.28% 100.00% task_struct 288 MB 9.93% 100.00% to slab mem objs slabs used active active ------------------------------------------------------------ kmalloc-16384 37 MB 100.00% 100.00% task_struct 31 MB 100.00% 100.00% Powerpc didn't support memoryless nodes until recently (64bb80d87f01 "powerpc/numa: Enable CONFIG_HAVE_MEMORYLESS_NODES" and 8c272261194d "powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"). Those commits also helped improve memory consumption with these kind of environments. Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-07-17 17:15:12 -06:00
*/
cpuhp_setup_state_nocalls(CPUHP_POWER_NUMA_PREPARE, "powerpc/numa:prepare",
ppc_numa_cpu_prepare, ppc_numa_cpu_dead);
}
static int __init early_numa(char *p)
{
if (!p)
return 0;
if (strstr(p, "off"))
numa_enabled = 0;
if (strstr(p, "debug"))
numa_debug = 1;
p = strstr(p, "fake=");
if (p)
cmdline = p + strlen("fake=");
return 0;
}
early_param("numa", early_numa);
static bool topology_updates_enabled = true;
static int __init early_topology_updates(char *p)
{
if (!p)
return 0;
if (!strcmp(p, "off")) {
pr_info("Disabling topology updates\n");
topology_updates_enabled = false;
}
return 0;
}
early_param("topology_updates", early_topology_updates);
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Find the node associated with a hot added memory section for
* memory represented in the device tree by the property
* ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory.
*/
static int hot_add_drconf_scn_to_nid(unsigned long scn_addr)
{
struct drmem_lmb *lmb;
unsigned long lmb_size;
int nid = -1;
lmb_size = drmem_lmb_size();
for_each_drmem_lmb(lmb) {
/* skip this block if it is reserved or not assigned to
* this partition */
if ((lmb->flags & DRCONF_MEM_RESERVED)
|| !(lmb->flags & DRCONF_MEM_ASSIGNED))
continue;
if ((scn_addr < lmb->base_addr)
|| (scn_addr >= (lmb->base_addr + lmb_size)))
continue;
nid = of_drconf_to_nid_single(lmb);
break;
}
return nid;
}
/*
* Find the node associated with a hot added memory section for memory
* represented in the device tree as a node (i.e. memory@XXXX) for
* each memblock.
*/
static int hot_add_node_scn_to_nid(unsigned long scn_addr)
{
struct device_node *memory;
int nid = -1;
for_each_node_by_type(memory, "memory") {
unsigned long start, size;
int ranges;
const __be32 *memcell_buf;
unsigned int len;
memcell_buf = of_get_property(memory, "reg", &len);
if (!memcell_buf || len <= 0)
continue;
/* ranges in cell */
ranges = (len >> 2) / (n_mem_addr_cells + n_mem_size_cells);
while (ranges--) {
start = read_n_cells(n_mem_addr_cells, &memcell_buf);
size = read_n_cells(n_mem_size_cells, &memcell_buf);
if ((scn_addr < start) || (scn_addr >= (start + size)))
continue;
nid = of_node_to_nid_single(memory);
break;
}
if (nid >= 0)
break;
}
of_node_put(memory);
return nid;
}
/*
* Find the node associated with a hot added memory section. Section
* corresponds to a SPARSEMEM section, not an MEMBLOCK. It is assumed that
* sections are fully contained within a single MEMBLOCK.
*/
int hot_add_scn_to_nid(unsigned long scn_addr)
{
struct device_node *memory = NULL;
powerpc/mm: allow memory hotplug into a memoryless node Patch series "enable movable nodes on non-x86 configs", v7. This patchset allows more configs to make use of movable nodes. When CONFIG_MOVABLE_NODE is selected, there are two ways to introduce such nodes into the system: 1. Discover movable nodes at boot. Currently this is only possible on x86, but we will enable configs supporting fdt to do the same. 2. Hotplug and online all of a node's memory using online_movable. This is already possible on any config supporting memory hotplug, not just x86, but the Kconfig doesn't say so. We will fix that. We'll also remove some cruft on power which would prevent (2). This patch (of 5): Remove the check which prevents us from hotplugging into an empty node. The original commit b226e4621245 ("[PATCH] powerpc: don't add memory to empty node/zone"), states that this was intended to be a temporary measure. It is a workaround for an oops which no longer occurs. Link: http://lkml.kernel.org/r/1479160961-25840-2-git-send-email-arbab@linux.vnet.ibm.com Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alistair Popple <apopple@au1.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stewart Smith <stewart@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12 17:42:52 -07:00
int nid;
if (!numa_enabled || (min_common_depth < 0))
return first_online_node;
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (memory) {
nid = hot_add_drconf_scn_to_nid(scn_addr);
of_node_put(memory);
} else {
nid = hot_add_node_scn_to_nid(scn_addr);
}
if (nid < 0 || !node_possible(nid))
nid = first_online_node;
return nid;
}
static u64 hot_add_drconf_memory_max(void)
{
struct device_node *memory = NULL;
powerpc/numa: Fix multiple bugs in memory_hotplug_max() memory_hotplug_max() uses hot_add_drconf_memory_max() to get maxmimum addressable memory by referring to ibm,dyanamic-memory property. There are three problems with the current approach: 1 hot_add_drconf_memory_max() assumes that ibm,dynamic-memory includes all the LMBs of the guest, but that is not true for PowerKVM which populates only DR LMBs (LMBs that can be hotplugged/removed) in that property. 2 hot_add_drconf_memory_max() multiplies lmb-size with lmb-count to arrive at the max possible address. Since ibm,dynamic-memory doesn't include RMA LMBs, the address thus obtained will be less than the actual max address. For example, if max possible memory size is 32G, with lmb-size of 256MB there can be 127 LMBs in ibm,dynamic-memory (1 LMB for RMA which won't be present here). hot_add_drconf_memory_max() would then return the max addressable memory as 127 * 256MB = 31.75GB, the max address should have been 32G which is what ibm,lrdr-capacity shows. 3 In PowerKVM, there can be a gap between the end of boot time RAM and beginning of hotplug RAM area. So just multiplying lmb-count with lmb-size will not provide the correct max possible address for PowerKVM. This patch fixes 1 by using ibm,lrdr-capacity property to return the max addressable memory whenever the property is present. Then it fixes 2 & 3 by fetching the address of the last LMB in ibm,dynamic-memory property. Fixes: cd34206e949b ("powerpc: Add memory_hotplug_max()") Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-12 07:34:15 -06:00
struct device_node *dn = NULL;
const __be64 *lrdr = NULL;
dn = of_find_node_by_path("/rtas");
if (dn) {
lrdr = of_get_property(dn, "ibm,lrdr-capacity", NULL);
of_node_put(dn);
if (lrdr)
return be64_to_cpup(lrdr);
}
memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
if (memory) {
of_node_put(memory);
return drmem_lmb_memory_max();
}
powerpc/numa: Fix multiple bugs in memory_hotplug_max() memory_hotplug_max() uses hot_add_drconf_memory_max() to get maxmimum addressable memory by referring to ibm,dyanamic-memory property. There are three problems with the current approach: 1 hot_add_drconf_memory_max() assumes that ibm,dynamic-memory includes all the LMBs of the guest, but that is not true for PowerKVM which populates only DR LMBs (LMBs that can be hotplugged/removed) in that property. 2 hot_add_drconf_memory_max() multiplies lmb-size with lmb-count to arrive at the max possible address. Since ibm,dynamic-memory doesn't include RMA LMBs, the address thus obtained will be less than the actual max address. For example, if max possible memory size is 32G, with lmb-size of 256MB there can be 127 LMBs in ibm,dynamic-memory (1 LMB for RMA which won't be present here). hot_add_drconf_memory_max() would then return the max addressable memory as 127 * 256MB = 31.75GB, the max address should have been 32G which is what ibm,lrdr-capacity shows. 3 In PowerKVM, there can be a gap between the end of boot time RAM and beginning of hotplug RAM area. So just multiplying lmb-count with lmb-size will not provide the correct max possible address for PowerKVM. This patch fixes 1 by using ibm,lrdr-capacity property to return the max addressable memory whenever the property is present. Then it fixes 2 & 3 by fetching the address of the last LMB in ibm,dynamic-memory property. Fixes: cd34206e949b ("powerpc: Add memory_hotplug_max()") Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-12 07:34:15 -06:00
return 0;
}
/*
* memory_hotplug_max - return max address of memory that may be added
*
* This is currently only used on systems that support drconfig memory
* hotplug.
*/
u64 memory_hotplug_max(void)
{
return max(hot_add_drconf_memory_max(), memblock_end_of_DRAM());
}
#endif /* CONFIG_MEMORY_HOTPLUG */
/* Virtual Processor Home Node (VPHN) support */
#ifdef CONFIG_PPC_SPLPAR
#include "vphn.h"
struct topology_update_data {
struct topology_update_data *next;
unsigned int cpu;
int old_nid;
int new_nid;
};
#define TOPOLOGY_DEF_TIMER_SECS 60
static u8 vphn_cpu_change_counts[NR_CPUS][MAX_DISTANCE_REF_POINTS];
static cpumask_t cpu_associativity_changes_mask;
static int vphn_enabled;
static int prrn_enabled;
static void reset_topology_timer(void);
static int topology_timer_secs = 1;
static int topology_inited;
/*
* Change polling interval for associativity changes.
*/
int timed_topology_update(int nsecs)
{
if (vphn_enabled) {
if (nsecs > 0)
topology_timer_secs = nsecs;
else
topology_timer_secs = TOPOLOGY_DEF_TIMER_SECS;
reset_topology_timer();
}
return 0;
}
/*
* Store the current values of the associativity change counters in the
* hypervisor.
*/
static void setup_cpu_associativity_change_counters(void)
{
int cpu;
/* The VPHN feature supports a maximum of 8 reference points */
BUILD_BUG_ON(MAX_DISTANCE_REF_POINTS > 8);
for_each_possible_cpu(cpu) {
int i;
u8 *counts = vphn_cpu_change_counts[cpu];
volatile u8 *hypervisor_counts = lppaca_of(cpu).vphn_assoc_counts;
for (i = 0; i < distance_ref_points_depth; i++)
counts[i] = hypervisor_counts[i];
}
}
/*
* The hypervisor maintains a set of 8 associativity change counters in
* the VPA of each cpu that correspond to the associativity levels in the
* ibm,associativity-reference-points property. When an associativity
* level changes, the corresponding counter is incremented.
*
* Set a bit in cpu_associativity_changes_mask for each cpu whose home
* node associativity levels have changed.
*
* Returns the number of cpus with unhandled associativity changes.
*/
static int update_cpu_associativity_changes_mask(void)
{
int cpu;
cpumask_t *changes = &cpu_associativity_changes_mask;
for_each_possible_cpu(cpu) {
int i, changed = 0;
u8 *counts = vphn_cpu_change_counts[cpu];
volatile u8 *hypervisor_counts = lppaca_of(cpu).vphn_assoc_counts;
for (i = 0; i < distance_ref_points_depth; i++) {
if (hypervisor_counts[i] != counts[i]) {
counts[i] = hypervisor_counts[i];
changed = 1;
}
}
if (changed) {
cpumask_or(changes, changes, cpu_sibling_mask(cpu));
cpu = cpu_last_thread_sibling(cpu);
}
}
return cpumask_weight(changes);
}
/*
* Retrieve the new associativity information for a virtual processor's
* home node.
*/
static long hcall_vphn(unsigned long cpu, __be32 *associativity)
{
long rc;
long retbuf[PLPAR_HCALL9_BUFSIZE] = {0};
u64 flags = 1;
int hwcpu = get_hard_smp_processor_id(cpu);
rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, retbuf, flags, hwcpu);
vphn_unpack_associativity(retbuf, associativity);
return rc;
}
static long vphn_get_associativity(unsigned long cpu,
__be32 *associativity)
{
long rc;
rc = hcall_vphn(cpu, associativity);
switch (rc) {
case H_FUNCTION:
printk_once(KERN_INFO
"VPHN is not supported. Disabling polling...\n");
stop_topology_update();
break;
case H_HARDWARE:
printk(KERN_ERR
"hcall_vphn() experienced a hardware fault "
"preventing VPHN. Disabling polling...\n");
stop_topology_update();
break;
case H_SUCCESS:
dbg("VPHN hcall succeeded. Reset polling...\n");
timed_topology_update(0);
break;
}
return rc;
}
int find_and_online_cpu_nid(int cpu)
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
{
__be32 associativity[VPHN_ASSOC_BUFSIZE] = {0};
int new_nid;
/* Use associativity from first thread for all siblings */
powerpc/numa: Use associativity if VPHN hcall is successful Currently associativity is used to lookup node-id even if the preceding VPHN hcall failed. However this can cause CPU to be made part of the wrong node, (most likely to be node 0). This is because VPHN is not enabled on KVM guests. With 2ea6263 ("powerpc/topology: Get topology for shared processors at boot"), associativity is used to set to the wrong node. Hence KVM guest topology is broken. For example : A 4 node KVM guest before would have reported. [root@localhost ~]# numactl -H available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 node 0 size: 1746 MB node 0 free: 1604 MB node 1 cpus: 4 5 6 7 node 1 size: 2044 MB node 1 free: 1765 MB node 2 cpus: 8 9 10 11 node 2 size: 2044 MB node 2 free: 1837 MB node 3 cpus: 12 13 14 15 node 3 size: 2044 MB node 3 free: 1903 MB node distances: node 0 1 2 3 0: 10 40 40 40 1: 40 10 40 40 2: 40 40 10 40 3: 40 40 40 10 Would now report: [root@localhost ~]# numactl -H available: 4 nodes (0-3) node 0 cpus: 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 0 size: 1746 MB node 0 free: 1244 MB node 1 cpus: node 1 size: 2044 MB node 1 free: 2032 MB node 2 cpus: 1 node 2 size: 2044 MB node 2 free: 2028 MB node 3 cpus: node 3 size: 2044 MB node 3 free: 2032 MB node distances: node 0 1 2 3 0: 10 40 40 40 1: 40 10 40 40 2: 40 40 10 40 3: 40 40 40 10 Fix this by skipping associativity lookup if the VPHN hcall failed. Fixes: 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-25 06:25:15 -06:00
if (vphn_get_associativity(cpu, associativity))
return cpu_to_node(cpu);
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
new_nid = associativity_to_nid(associativity);
if (new_nid < 0 || !node_possible(new_nid))
new_nid = first_online_node;
if (NODE_DATA(new_nid) == NULL) {
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Need to ensure that NODE_DATA is initialized for a node from
* available memory (see memblock_alloc_try_nid). If unable to
* init the node, then default to nearest node that has memory
powerpc/numa: Skip onlining a offline node in kdump path With commit 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot"), kdump kernel on shared LPAR may crash. The necessary conditions are - Shared LPAR with at least 2 nodes having memory and CPUs. - Memory requirement for kdump kernel must be met by the first N-1 nodes where there are at least N nodes with memory and CPUs. Example numactl of such a machine. $ numactl -H available: 5 nodes (0,2,5-7) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 2 cpus: node 2 size: 255 MB node 2 free: 189 MB node 5 cpus: 24 25 26 27 28 29 30 31 node 5 size: 4095 MB node 5 free: 4024 MB node 6 cpus: 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 node 6 size: 6353 MB node 6 free: 5998 MB node 7 cpus: 8 9 10 11 12 13 14 15 32 33 34 35 36 37 38 39 node 7 size: 7640 MB node 7 free: 7164 MB node distances: node 0 2 5 6 7 0: 10 40 40 40 40 2: 40 10 40 40 40 5: 40 40 10 40 40 6: 40 40 40 10 20 7: 40 40 40 20 10 Steps to reproduce. 1. Load / start kdump service. 2. Trigger a kdump (for example : echo c > /proc/sysrq-trigger) When booting a kdump kernel with 2048M: kexec: Starting switchover sequence. I'm in purgatory Using 1TB segments hash-mmu: Initializing hash mmu with SLB Linux version 4.19.0-rc5-master+ (srikar@linux-xxu6) (gcc version 4.8.5 (SUSE Linux)) #1 SMP Thu Sep 27 19:45:00 IST 2018 Found initrd at 0xc000000009e70000:0xc00000000ae554b4 Using pSeries machine description ----------------------------------------------------- ppc64_pft_size = 0x1e phys_mem_size = 0x88000000 dcache_bsize = 0x80 icache_bsize = 0x80 cpu_features = 0x000000ff8f5d91a7 possible = 0x0000fbffcf5fb1a7 always = 0x0000006f8b5c91a1 cpu_user_features = 0xdc0065c2 0xef000000 mmu_features = 0x7c006001 firmware_features = 0x00000007c45bfc57 htab_hash_mask = 0x7fffff physical_start = 0x8000000 ----------------------------------------------------- numa: NODE_DATA [mem 0x87d5e300-0x87d67fff] numa: NODE_DATA(0) on node 6 numa: NODE_DATA [mem 0x87d54600-0x87d5e2ff] Top of RAM: 0x88000000, Total RAM: 0x88000000 Memory hole size: 0MB Zone ranges: DMA [mem 0x0000000000000000-0x0000000087ffffff] DMA32 empty Normal empty Movable zone start for each node Early memory node ranges node 6: [mem 0x0000000000000000-0x0000000087ffffff] Could not find start_pfn for node 0 Initmem setup node 0 [mem 0x0000000000000000-0x0000000000000000] On node 0 totalpages: 0 Initmem setup node 6 [mem 0x0000000000000000-0x0000000087ffffff] On node 6 totalpages: 34816 Unable to handle kernel paging request for data at address 0x00000060 Faulting instruction address: 0xc000000008703a54 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 11 PID: 1 Comm: swapper/11 Not tainted 4.19.0-rc5-master+ #1 NIP: c000000008703a54 LR: c000000008703a38 CTR: 0000000000000000 REGS: c00000000b673440 TRAP: 0380 Not tainted (4.19.0-rc5-master+) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 24022022 XER: 20000002 CFAR: c0000000086fc238 IRQMASK: 0 GPR00: c000000008703a38 c00000000b6736c0 c000000009281900 0000000000000000 GPR04: 0000000000000000 0000000000000000 fffffffffffff001 c00000000b660080 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000220 GPR12: 0000000000002200 c000000009e51400 0000000000000000 0000000000000008 GPR16: 0000000000000000 c000000008c152e8 c000000008c152a8 0000000000000000 GPR20: c000000009422fd8 c000000009412fd8 c000000009426040 0000000000000008 GPR24: 0000000000000000 0000000000000000 c000000009168bc8 c000000009168c78 GPR28: c00000000b126410 0000000000000000 c00000000916a0b8 c00000000b126400 NIP [c000000008703a54] bus_add_device+0x84/0x1e0 LR [c000000008703a38] bus_add_device+0x68/0x1e0 Call Trace: [c00000000b6736c0] [c000000008703a38] bus_add_device+0x68/0x1e0 (unreliable) [c00000000b673740] [c000000008700194] device_add+0x454/0x7c0 [c00000000b673800] [c00000000872e660] __register_one_node+0xb0/0x240 [c00000000b673860] [c00000000839a6bc] __try_online_node+0x12c/0x180 [c00000000b673900] [c00000000839b978] try_online_node+0x58/0x90 [c00000000b673930] [c0000000080846d8] find_and_online_cpu_nid+0x158/0x190 [c00000000b673a10] [c0000000080848a0] numa_update_cpu_topology+0x190/0x580 [c00000000b673c00] [c000000008d3f2e4] smp_cpus_done+0x94/0x108 [c00000000b673c70] [c000000008d5c00c] smp_init+0x174/0x19c [c00000000b673d00] [c000000008d346b8] kernel_init_freeable+0x1e0/0x450 [c00000000b673dc0] [c0000000080102e8] kernel_init+0x28/0x160 [c00000000b673e30] [c00000000800b65c] ret_from_kernel_thread+0x5c/0x80 Instruction dump: 60000000 60000000 e89e0020 7fe3fb78 4bff87d5 60000000 7c7d1b79 4082008c e8bf0050 e93e0098 3b9f0010 2fa50000 <e8690060> 38630018 419e0114 7f84e378 ---[ end trace 593577668c2daa65 ]--- However a regular kernel with 4096M (2048 gets reserved for crash kernel) boots properly. Unlike regular kernels, which mark all available nodes as online, kdump kernel only marks just enough nodes as online and marks the rest as offline at boot. However kdump kernel boots with all available CPUs. With Commit 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot"), all CPUs are onlined on their respective nodes at boot time. try_online_node() tries to online the offline nodes but fails as all needed subsystems are not yet initialized. As part of fix, detect and skip early onlining of a offline node. Fixes: 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot") Reported-by: Pavithra Prakash <pavrampu@in.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Tested-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 21:47:32 -06:00
* installed. Skip onlining a node if the subsystems are not
* yet initialized.
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
*/
powerpc/numa: Skip onlining a offline node in kdump path With commit 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot"), kdump kernel on shared LPAR may crash. The necessary conditions are - Shared LPAR with at least 2 nodes having memory and CPUs. - Memory requirement for kdump kernel must be met by the first N-1 nodes where there are at least N nodes with memory and CPUs. Example numactl of such a machine. $ numactl -H available: 5 nodes (0,2,5-7) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 2 cpus: node 2 size: 255 MB node 2 free: 189 MB node 5 cpus: 24 25 26 27 28 29 30 31 node 5 size: 4095 MB node 5 free: 4024 MB node 6 cpus: 0 1 2 3 4 5 6 7 16 17 18 19 20 21 22 23 node 6 size: 6353 MB node 6 free: 5998 MB node 7 cpus: 8 9 10 11 12 13 14 15 32 33 34 35 36 37 38 39 node 7 size: 7640 MB node 7 free: 7164 MB node distances: node 0 2 5 6 7 0: 10 40 40 40 40 2: 40 10 40 40 40 5: 40 40 10 40 40 6: 40 40 40 10 20 7: 40 40 40 20 10 Steps to reproduce. 1. Load / start kdump service. 2. Trigger a kdump (for example : echo c > /proc/sysrq-trigger) When booting a kdump kernel with 2048M: kexec: Starting switchover sequence. I'm in purgatory Using 1TB segments hash-mmu: Initializing hash mmu with SLB Linux version 4.19.0-rc5-master+ (srikar@linux-xxu6) (gcc version 4.8.5 (SUSE Linux)) #1 SMP Thu Sep 27 19:45:00 IST 2018 Found initrd at 0xc000000009e70000:0xc00000000ae554b4 Using pSeries machine description ----------------------------------------------------- ppc64_pft_size = 0x1e phys_mem_size = 0x88000000 dcache_bsize = 0x80 icache_bsize = 0x80 cpu_features = 0x000000ff8f5d91a7 possible = 0x0000fbffcf5fb1a7 always = 0x0000006f8b5c91a1 cpu_user_features = 0xdc0065c2 0xef000000 mmu_features = 0x7c006001 firmware_features = 0x00000007c45bfc57 htab_hash_mask = 0x7fffff physical_start = 0x8000000 ----------------------------------------------------- numa: NODE_DATA [mem 0x87d5e300-0x87d67fff] numa: NODE_DATA(0) on node 6 numa: NODE_DATA [mem 0x87d54600-0x87d5e2ff] Top of RAM: 0x88000000, Total RAM: 0x88000000 Memory hole size: 0MB Zone ranges: DMA [mem 0x0000000000000000-0x0000000087ffffff] DMA32 empty Normal empty Movable zone start for each node Early memory node ranges node 6: [mem 0x0000000000000000-0x0000000087ffffff] Could not find start_pfn for node 0 Initmem setup node 0 [mem 0x0000000000000000-0x0000000000000000] On node 0 totalpages: 0 Initmem setup node 6 [mem 0x0000000000000000-0x0000000087ffffff] On node 6 totalpages: 34816 Unable to handle kernel paging request for data at address 0x00000060 Faulting instruction address: 0xc000000008703a54 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 11 PID: 1 Comm: swapper/11 Not tainted 4.19.0-rc5-master+ #1 NIP: c000000008703a54 LR: c000000008703a38 CTR: 0000000000000000 REGS: c00000000b673440 TRAP: 0380 Not tainted (4.19.0-rc5-master+) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 24022022 XER: 20000002 CFAR: c0000000086fc238 IRQMASK: 0 GPR00: c000000008703a38 c00000000b6736c0 c000000009281900 0000000000000000 GPR04: 0000000000000000 0000000000000000 fffffffffffff001 c00000000b660080 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000220 GPR12: 0000000000002200 c000000009e51400 0000000000000000 0000000000000008 GPR16: 0000000000000000 c000000008c152e8 c000000008c152a8 0000000000000000 GPR20: c000000009422fd8 c000000009412fd8 c000000009426040 0000000000000008 GPR24: 0000000000000000 0000000000000000 c000000009168bc8 c000000009168c78 GPR28: c00000000b126410 0000000000000000 c00000000916a0b8 c00000000b126400 NIP [c000000008703a54] bus_add_device+0x84/0x1e0 LR [c000000008703a38] bus_add_device+0x68/0x1e0 Call Trace: [c00000000b6736c0] [c000000008703a38] bus_add_device+0x68/0x1e0 (unreliable) [c00000000b673740] [c000000008700194] device_add+0x454/0x7c0 [c00000000b673800] [c00000000872e660] __register_one_node+0xb0/0x240 [c00000000b673860] [c00000000839a6bc] __try_online_node+0x12c/0x180 [c00000000b673900] [c00000000839b978] try_online_node+0x58/0x90 [c00000000b673930] [c0000000080846d8] find_and_online_cpu_nid+0x158/0x190 [c00000000b673a10] [c0000000080848a0] numa_update_cpu_topology+0x190/0x580 [c00000000b673c00] [c000000008d3f2e4] smp_cpus_done+0x94/0x108 [c00000000b673c70] [c000000008d5c00c] smp_init+0x174/0x19c [c00000000b673d00] [c000000008d346b8] kernel_init_freeable+0x1e0/0x450 [c00000000b673dc0] [c0000000080102e8] kernel_init+0x28/0x160 [c00000000b673e30] [c00000000800b65c] ret_from_kernel_thread+0x5c/0x80 Instruction dump: 60000000 60000000 e89e0020 7fe3fb78 4bff87d5 60000000 7c7d1b79 4082008c e8bf0050 e93e0098 3b9f0010 2fa50000 <e8690060> 38630018 419e0114 7f84e378 ---[ end trace 593577668c2daa65 ]--- However a regular kernel with 4096M (2048 gets reserved for crash kernel) boots properly. Unlike regular kernels, which mark all available nodes as online, kdump kernel only marks just enough nodes as online and marks the rest as offline at boot. However kdump kernel boots with all available CPUs. With Commit 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot"), all CPUs are onlined on their respective nodes at boot time. try_online_node() tries to online the offline nodes but fails as all needed subsystems are not yet initialized. As part of fix, detect and skip early onlining of a offline node. Fixes: 2ea626306810 ("powerpc/topology: Get topology for shared processors at boot") Reported-by: Pavithra Prakash <pavrampu@in.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Tested-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-27 21:47:32 -06:00
if (!topology_inited || try_online_node(new_nid))
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
new_nid = first_online_node;
#else
/*
* Default to using the nearest node that has memory installed.
* Otherwise, it would be necessary to patch the kernel MM code
* to deal with more memoryless-node error conditions.
*/
new_nid = first_online_node;
#endif
}
pr_debug("%s:%d cpu %d nid %d\n", __FUNCTION__, __LINE__,
cpu, new_nid);
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
return new_nid;
}
/*
* Update the CPU maps and sysfs entries for a single CPU when its NUMA
* characteristics change. This function doesn't perform any locking and is
* only safe to call from stop_machine().
*/
static int update_cpu_topology(void *data)
{
struct topology_update_data *update;
unsigned long cpu;
if (!data)
return -EINVAL;
cpu = smp_processor_id();
for (update = data; update; update = update->next) {
int new_nid = update->new_nid;
if (cpu != update->cpu)
continue;
unmap_cpu_from_node(cpu);
map_cpu_to_node(cpu, new_nid);
set_cpu_numa_node(cpu, new_nid);
set_cpu_numa_mem(cpu, local_memory_node(new_nid));
vdso_getcpu_init();
}
return 0;
}
powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 04:35:34 -07:00
static int update_lookup_table(void *data)
{
struct topology_update_data *update;
if (!data)
return -EINVAL;
/*
* Upon topology update, the numa-cpu lookup table needs to be updated
* for all threads in the core, including offline CPUs, to ensure that
* future hotplug operations respect the cpu-to-node associativity
* properly.
*/
for (update = data; update; update = update->next) {
int nid, base, j;
nid = update->new_nid;
base = cpu_first_thread_sibling(update->cpu);
for (j = 0; j < threads_per_core; j++) {
update_numa_cpu_lookup_table(base + j, nid);
}
}
return 0;
}
/*
* Update the node maps and sysfs entries for each cpu whose home node
* has changed. Returns 1 when the topology has changed, and 0 otherwise.
*
* cpus_locked says whether we already hold cpu_hotplug_lock.
*/
int numa_update_cpu_topology(bool cpus_locked)
{
unsigned int cpu, sibling, changed = 0;
struct topology_update_data *updates, *ud;
cpumask_t updated_cpus;
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21 15:29:42 -07:00
struct device *dev;
int weight, new_nid, i = 0;
powerpc/topology: Get topology for shared processors at boot On a shared LPAR, Phyp will not update the CPU associativity at boot time. Just after the boot system does recognize itself as a shared LPAR and trigger a request for correct CPU associativity. But by then the scheduler would have already created/destroyed its sched domains. This causes - Broken load balance across Nodes causing islands of cores. - Performance degradation esp if the system is lightly loaded - dmesg to wrongly report all CPUs to be in Node 0. - Messages in dmesg saying borken topology. - With commit 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain"), can cause rcu stalls at boot up. The sched_domains_numa_masks table which is used to generate cpumasks is only created at boot time just before creating sched domains and never updated. Hence, its better to get the topology correct before the sched domains are created. For example on 64 core Power 8 shared LPAR, dmesg reports Brought up 512 CPUs Node 0 CPUs: 0-511 Node 1 CPUs: Node 2 CPUs: Node 3 CPUs: Node 4 CPUs: Node 5 CPUs: Node 6 CPUs: Node 7 CPUs: Node 8 CPUs: Node 9 CPUs: Node 10 CPUs: Node 11 CPUs: ... BUG: arch topology borken the DIE domain not a subset of the NUMA domain BUG: arch topology borken the DIE domain not a subset of the NUMA domain numactl/lscpu output will still be correct with cores spreading across all nodes: Socket(s): 64 NUMA node(s): 12 Model: 2.0 (pvr 004d 0200) Model name: POWER8 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 64K L1i cache: 32K NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471 NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479 NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487 NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495 NUMA node4 CPU(s): 208-215,304-311,400-407,496-503 NUMA node5 CPU(s): 168-175,264-271,360-367,456-463 NUMA node6 CPU(s): 128-135,224-231,320-327,416-423 NUMA node7 CPU(s): 136-143,232-239,328-335,424-431 NUMA node8 CPU(s): 216-223,312-319,408-415,504-511 NUMA node9 CPU(s): 144-151,240-247,336-343,432-439 NUMA node10 CPU(s): 152-159,248-255,344-351,440-447 NUMA node11 CPU(s): 160-167,256-263,352-359,448-455 Currently on this LPAR, the scheduler detects 2 levels of Numa and created numa sched domains for all CPUs, but it finds a single DIE domain consisting of all CPUs. Hence it deletes all numa sched domains. To address this, detect the shared processor and update topology soon after CPUs are setup so that correct topology is updated just before scheduler creates sched domain. With the fix, dmesg reports: numa: Node 0 CPUs: 0-7 32-39 64-71 96-103 176-183 272-279 368-375 464-471 numa: Node 1 CPUs: 8-15 40-47 72-79 104-111 184-191 280-287 376-383 472-479 numa: Node 2 CPUs: 16-23 48-55 80-87 112-119 192-199 288-295 384-391 480-487 numa: Node 3 CPUs: 24-31 56-63 88-95 120-127 200-207 296-303 392-399 488-495 numa: Node 4 CPUs: 208-215 304-311 400-407 496-503 numa: Node 5 CPUs: 168-175 264-271 360-367 456-463 numa: Node 6 CPUs: 128-135 224-231 320-327 416-423 numa: Node 7 CPUs: 136-143 232-239 328-335 424-431 numa: Node 8 CPUs: 216-223 312-319 408-415 504-511 numa: Node 9 CPUs: 144-151 240-247 336-343 432-439 numa: Node 10 CPUs: 152-159 248-255 344-351 440-447 numa: Node 11 CPUs: 160-167 256-263 352-359 448-455 and lscpu also reports: Socket(s): 64 NUMA node(s): 12 Model: 2.0 (pvr 004d 0200) Model name: POWER8 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 64K L1i cache: 32K NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471 NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479 NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487 NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495 NUMA node4 CPU(s): 208-215,304-311,400-407,496-503 NUMA node5 CPU(s): 168-175,264-271,360-367,456-463 NUMA node6 CPU(s): 128-135,224-231,320-327,416-423 NUMA node7 CPU(s): 136-143,232-239,328-335,424-431 NUMA node8 CPU(s): 216-223,312-319,408-415,504-511 NUMA node9 CPU(s): 144-151,240-247,336-343,432-439 NUMA node10 CPU(s): 152-159,248-255,344-351,440-447 NUMA node11 CPU(s): 160-167,256-263,352-359,448-455 Reported-by: Manjunatha H R <manjuhr1@in.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> [mpe: Trim / format change log] Tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-17 08:54:39 -06:00
if (!prrn_enabled && !vphn_enabled && topology_inited)
return 0;
weight = cpumask_weight(&cpu_associativity_changes_mask);
if (!weight)
return 0;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 15:03:40 -06:00
updates = kcalloc(weight, sizeof(*updates), GFP_KERNEL);
if (!updates)
return 0;
cpumask_clear(&updated_cpus);
for_each_cpu(cpu, &cpu_associativity_changes_mask) {
/*
* If siblings aren't flagged for changes, updates list
* will be too short. Skip on this update and set for next
* update.
*/
if (!cpumask_subset(cpu_sibling_mask(cpu),
&cpu_associativity_changes_mask)) {
pr_info("Sibling bits not set for associativity "
"change, cpu%d\n", cpu);
cpumask_or(&cpu_associativity_changes_mask,
&cpu_associativity_changes_mask,
cpu_sibling_mask(cpu));
cpu = cpu_last_thread_sibling(cpu);
continue;
}
powerpc/numa: Ensure nodes initialized for hotplug This patch fixes some problems encountered at runtime with configurations that support memory-less nodes, or that hot-add CPUs into nodes that are memoryless during system execution after boot. The problems of interest include: * Nodes known to powerpc to be memoryless at boot, but to have CPUs in them are allowed to be 'possible' and 'online'. Memory allocations for those nodes are taken from another node that does have memory until and if memory is hot-added to the node. * Nodes which have no resources assigned at boot, but which may still be referenced subsequently by affinity or associativity attributes, are kept in the list of 'possible' nodes for powerpc. Hot-add of memory or CPUs to the system can reference these nodes and bring them online instead of redirecting the references to one of the set of nodes known to have memory at boot. Note that this software operates under the context of CPU hotplug. We are not doing memory hotplug in this code, but rather updating the kernel's CPU topology (i.e. arch_update_cpu_topology / numa_update_cpu_topology). We are initializing a node that may be used by CPUs or memory before it can be referenced as invalid by a CPU hotplug operation. CPU hotplug operations are protected by a range of APIs including cpu_maps_update_begin/cpu_maps_update_done, cpus_read/write_lock / cpus_read/write_unlock, device locks, and more. Memory hotplug operations, including try_online_node, are protected by mem_hotplug_begin/mem_hotplug_done, device locks, and more. In the case of CPUs being hot-added to a previously memoryless node, the try_online_node operation occurs wholly within the CPU locks with no overlap. Using HMC hot-add/hot-remove operations, we have been able to add and remove CPUs to any possible node without failures. HMC operations involve a degree self-serialization, though. Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-28 15:58:40 -07:00
new_nid = find_and_online_cpu_nid(cpu);
if (new_nid == numa_cpu_lookup_table[cpu]) {
cpumask_andnot(&cpu_associativity_changes_mask,
&cpu_associativity_changes_mask,
cpu_sibling_mask(cpu));
dbg("Assoc chg gives same node %d for cpu%d\n",
new_nid, cpu);
cpu = cpu_last_thread_sibling(cpu);
continue;
}
for_each_cpu(sibling, cpu_sibling_mask(cpu)) {
ud = &updates[i++];
ud->next = &updates[i];
ud->cpu = sibling;
ud->new_nid = new_nid;
ud->old_nid = numa_cpu_lookup_table[sibling];
cpumask_set_cpu(sibling, &updated_cpus);
}
cpu = cpu_last_thread_sibling(cpu);
}
/*
* Prevent processing of 'updates' from overflowing array
* where last entry filled in a 'next' pointer.
*/
if (i)
updates[i-1].next = NULL;
pr_debug("Topology update for the following CPUs:\n");
if (cpumask_weight(&updated_cpus)) {
for (ud = &updates[0]; ud; ud = ud->next) {
pr_debug("cpu %d moving from node %d "
"to %d\n", ud->cpu,
ud->old_nid, ud->new_nid);
}
}
power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update Since v1: Edited the comment according to Srivatsa's suggestion. During the testing, we encounter below WARN followed by Oops: WARNING: at kernel/sched/core.c:6218 ... NIP [c000000000101660] .build_sched_domains+0x11d0/0x1200 LR [c000000000101358] .build_sched_domains+0xec8/0x1200 PACATMSCRATCH [800000000000f032] Call Trace: [c00000001b103850] [c000000000101358] .build_sched_domains+0xec8/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c00000000045c000] .__bitmap_weight+0x60/0xf0 LR [c00000000010132c] .build_sched_domains+0xe9c/0x1200 PACATMSCRATCH [8000000000029032] Call Trace: [c00000001b1037a0] [c000000000288ff4] .kmem_cache_alloc_node_trace+0x184/0x3a0 [c00000001b103850] [c00000000010132c] .build_sched_domains+0xe9c/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... This was caused by that 'sd->groups == NULL' after building groups, which was caused by the empty 'sd->span'. The cpu's domain contained nothing because the cpu was assigned to a wrong node, due to the following unfortunate sequence of events: 1. The hypervisor sent a topology update to the guest OS, to notify changes to the cpu-node mapping. However, the update was actually redundant - i.e., the "new" mapping was exactly the same as the old one. 2. Due to this, the 'updated_cpus' mask turned out to be empty after exiting the 'for-loop' in arch_update_cpu_topology(). 3. So we ended up calling stop-machine() with an empty cpumask list, which made stop-machine internally elect cpumask_first(cpu_online_mask), i.e., CPU0 as the cpu to run the payload (the update_cpu_topology() function). 4. This causes update_cpu_topology() to be run by CPU0. And since 'updates' is kzalloc()'ed inside arch_update_cpu_topology(), update_cpu_topology() finds update->cpu as well as update->new_nid to be 0. In other words, we end up assigning CPU0 (and eventually its siblings) to node 0, incorrectly. Along with the following wrong updating, it causes the sched-domain rebuild code to break and crash the system. Fix this by skipping the topology update in cases where we find that the topology has not actually changed in reality (ie., spurious updates). CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Nathan Fontenot <nfont@linux.vnet.ibm.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Andrew Morton <akpm@linux-foundation.org> CC: Robert Jennings <rcj@linux.vnet.ibm.com> CC: Jesse Larrew <jlarrew@linux.vnet.ibm.com> CC: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> CC: Alistair Popple <alistair@popple.id.au> Suggested-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-07 21:19:36 -06:00
/*
* In cases where we have nothing to update (because the updates list
* is too short or because the new topology is same as the old one),
* skip invoking update_cpu_topology() via stop-machine(). This is
* necessary (and not just a fast-path optimization) since stop-machine
* can end up electing a random CPU to run update_cpu_topology(), and
* thus trick us into setting up incorrect cpu-node mappings (since
* 'updates' is kzalloc()'ed).
*
* And for the similar reason, we will skip all the following updating.
*/
if (!cpumask_weight(&updated_cpus))
goto out;
if (cpus_locked)
stop_machine_cpuslocked(update_cpu_topology, &updates[0],
&updated_cpus);
else
stop_machine(update_cpu_topology, &updates[0], &updated_cpus);
powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 04:35:34 -07:00
/*
* Update the numa-cpu lookup table with the new mappings, even for
* offline CPUs. It is best to perform this update from the stop-
* machine context.
*/
if (cpus_locked)
stop_machine_cpuslocked(update_lookup_table, &updates[0],
powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 04:35:34 -07:00
cpumask_of(raw_smp_processor_id()));
else
stop_machine(update_lookup_table, &updates[0],
cpumask_of(raw_smp_processor_id()));
powerpc: Fix the setup of CPU-to-Node mappings during CPU online On POWER platforms, the hypervisor can notify the guest kernel about dynamic changes in the cpu-numa associativity (VPHN topology update). Hence the cpu-to-node mappings that we got from the firmware during boot, may no longer be valid after such updates. This is handled using the arch_update_cpu_topology() hook in the scheduler, and the sched-domains are rebuilt according to the new mappings. But unfortunately, at the moment, CPU hotplug ignores these updated mappings and instead queries the firmware for the cpu-to-numa relationships and uses them during CPU online. So the kernel can end up assigning wrong NUMA nodes to CPUs during subsequent CPU hotplug online operations (after booting). Further, a particularly problematic scenario can result from this bug: On POWER platforms, the SMT mode can be switched between 1, 2, 4 (and even 8) threads per core. The switch to Single-Threaded (ST) mode is performed by offlining all except the first CPU thread in each core. Switching back to SMT mode involves onlining those other threads back, in each core. Now consider this scenario: 1. During boot, the kernel gets the cpu-to-node mappings from the firmware and assigns the CPUs to NUMA nodes appropriately, during CPU online. 2. Later on, the hypervisor updates the cpu-to-node mappings dynamically and communicates this update to the kernel. The kernel in turn updates its cpu-to-node associations and rebuilds its sched domains. Everything is fine so far. 3. Now, the user switches the machine from SMT to ST mode (say, by running ppc64_cpu --smt=1). This involves offlining all except 1 thread in each core. 4. The user then tries to switch back from ST to SMT mode (say, by running ppc64_cpu --smt=4), and this involves onlining those threads back. Since CPU hotplug ignores the new mappings, it queries the firmware and tries to associate the newly onlined sibling threads to the old NUMA nodes. This results in sibling threads within the same core getting associated with different NUMA nodes, which is incorrect. The scheduler's build-sched-domains code gets thoroughly confused with this and enters an infinite loop and causes soft-lockups, as explained in detail in commit 3be7db6ab (powerpc: VPHN topology change updates all siblings). So to fix this, use the numa_cpu_lookup_table to remember the updated cpu-to-node mappings, and use them during CPU hotplug online operations. Further, we also need to ensure that all threads in a core are assigned to a common NUMA node, irrespective of whether all those threads were online during the topology update. To achieve this, we take care not to use cpu_sibling_mask() since it is not hotplug invariant. Instead, we use cpu_first_sibling_thread() and set up the mappings manually using the 'threads_per_core' value for that particular platform. This helps us ensure that we don't hit this bug with any combination of CPU hotplug and SMT mode switching. Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-12-30 04:35:34 -07:00
for (ud = &updates[0]; ud; ud = ud->next) {
unregister_cpu_under_node(ud->cpu, ud->old_nid);
register_cpu_under_node(ud->cpu, ud->new_nid);
dev = get_cpu_device(ud->cpu);
cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@amd64.org> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dave Jones <davej@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-21 15:29:42 -07:00
if (dev)
kobject_uevent(&dev->kobj, KOBJ_CHANGE);
cpumask_clear_cpu(ud->cpu, &cpu_associativity_changes_mask);
changed = 1;
}
power, sched: stop updating inside arch_update_cpu_topology() when nothing to be update Since v1: Edited the comment according to Srivatsa's suggestion. During the testing, we encounter below WARN followed by Oops: WARNING: at kernel/sched/core.c:6218 ... NIP [c000000000101660] .build_sched_domains+0x11d0/0x1200 LR [c000000000101358] .build_sched_domains+0xec8/0x1200 PACATMSCRATCH [800000000000f032] Call Trace: [c00000001b103850] [c000000000101358] .build_sched_domains+0xec8/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c00000000045c000] .__bitmap_weight+0x60/0xf0 LR [c00000000010132c] .build_sched_domains+0xe9c/0x1200 PACATMSCRATCH [8000000000029032] Call Trace: [c00000001b1037a0] [c000000000288ff4] .kmem_cache_alloc_node_trace+0x184/0x3a0 [c00000001b103850] [c00000000010132c] .build_sched_domains+0xe9c/0x1200 [c00000001b1039a0] [c00000000010aad4] .partition_sched_domains+0x484/0x510 [c00000001b103aa0] [c00000000016d0a8] .rebuild_sched_domains+0x68/0xa0 [c00000001b103b30] [c00000000005cbf0] .topology_work_fn+0x10/0x30 ... This was caused by that 'sd->groups == NULL' after building groups, which was caused by the empty 'sd->span'. The cpu's domain contained nothing because the cpu was assigned to a wrong node, due to the following unfortunate sequence of events: 1. The hypervisor sent a topology update to the guest OS, to notify changes to the cpu-node mapping. However, the update was actually redundant - i.e., the "new" mapping was exactly the same as the old one. 2. Due to this, the 'updated_cpus' mask turned out to be empty after exiting the 'for-loop' in arch_update_cpu_topology(). 3. So we ended up calling stop-machine() with an empty cpumask list, which made stop-machine internally elect cpumask_first(cpu_online_mask), i.e., CPU0 as the cpu to run the payload (the update_cpu_topology() function). 4. This causes update_cpu_topology() to be run by CPU0. And since 'updates' is kzalloc()'ed inside arch_update_cpu_topology(), update_cpu_topology() finds update->cpu as well as update->new_nid to be 0. In other words, we end up assigning CPU0 (and eventually its siblings) to node 0, incorrectly. Along with the following wrong updating, it causes the sched-domain rebuild code to break and crash the system. Fix this by skipping the topology update in cases where we find that the topology has not actually changed in reality (ie., spurious updates). CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> CC: Nathan Fontenot <nfont@linux.vnet.ibm.com> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Andrew Morton <akpm@linux-foundation.org> CC: Robert Jennings <rcj@linux.vnet.ibm.com> CC: Jesse Larrew <jlarrew@linux.vnet.ibm.com> CC: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> CC: Alistair Popple <alistair@popple.id.au> Suggested-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-04-07 21:19:36 -06:00
out:
kfree(updates);
return changed;
}
int arch_update_cpu_topology(void)
{
return numa_update_cpu_topology(true);
}
static void topology_work_fn(struct work_struct *work)
{
rebuild_sched_domains();
}
static DECLARE_WORK(topology_work, topology_work_fn);
static void topology_schedule_update(void)
{
schedule_work(&topology_work);
}
timer: Remove init_timer_deferrable() in favor of timer_setup() This refactors the only users of init_timer_deferrable() to use the new timer_setup() and from_timer(). Removes definition of init_timer_deferrable(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Sebastian Reichel <sre@kernel.org> # for drivers/hsi parts Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-wireless@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Michael Reed <mdr@sgi.com> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-6-git-send-email-keescook@chromium.org
2017-10-04 17:26:59 -06:00
static void topology_timer_fn(struct timer_list *unused)
{
if (prrn_enabled && cpumask_weight(&cpu_associativity_changes_mask))
topology_schedule_update();
else if (vphn_enabled) {
if (update_cpu_associativity_changes_mask() > 0)
topology_schedule_update();
reset_topology_timer();
}
}
timer: Remove init_timer_deferrable() in favor of timer_setup() This refactors the only users of init_timer_deferrable() to use the new timer_setup() and from_timer(). Removes definition of init_timer_deferrable(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Sebastian Reichel <sre@kernel.org> # for drivers/hsi parts Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-wireless@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Michael Reed <mdr@sgi.com> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-6-git-send-email-keescook@chromium.org
2017-10-04 17:26:59 -06:00
static struct timer_list topology_timer;
static void reset_topology_timer(void)
{
powerpc/pseries: Fix unitialized timer reset on migration After migration of a powerpc LPAR, the kernel executes code to update the system state to reflect new platform characteristics. Such changes include modifications to device tree properties provided to the system by PHYP. Property notifications received by the post_mobility_fixup() code are passed along to the kernel in general through a call to of_update_property() which in turn passes such events back to all modules through entries like the '.notifier_call' function within the NUMA module. When the NUMA module updates its state, it resets its event timer. If this occurs after a previous call to stop_topology_update() or on a system without VPHN enabled, the code runs into an unitialized timer structure and crashes. This patch adds a safety check along this path toward the problem code. An example crash log is as follows. ibmvscsi 30000081: Re-enabling adapter! ------------[ cut here ]------------ kernel BUG at kernel/time/timer.c:958! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: nfsv3 nfs_acl nfs tcp_diag udp_diag inet_diag lockd unix_diag af_packet_diag netlink_diag grace fscache sunrpc xts vmx_crypto pseries_rng sg binfmt_misc ip_tables xfs libcrc32c sd_mod ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod CPU: 11 PID: 3067 Comm: drmgr Not tainted 4.17.0+ #179 ... NIP mod_timer+0x4c/0x400 LR reset_topology_timer+0x40/0x60 Call Trace: 0xc0000003f9407830 (unreliable) reset_topology_timer+0x40/0x60 dt_update_callback+0x100/0x120 notifier_call_chain+0x90/0x100 __blocking_notifier_call_chain+0x60/0x90 of_property_notify+0x90/0xd0 of_update_property+0x104/0x150 update_dt_property+0xdc/0x1f0 pseries_devicetree_update+0x2d0/0x510 post_mobility_fixup+0x7c/0xf0 migration_store+0xa4/0xc0 kobj_attr_store+0x30/0x60 sysfs_kf_write+0x64/0xa0 kernfs_fop_write+0x16c/0x240 __vfs_write+0x40/0x200 vfs_write+0xc8/0x240 ksys_write+0x5c/0x100 system_call+0x58/0x6c Fixes: 5d88aa85c00b ("powerpc/pseries: Update CPU maps when device tree is updated") Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-20 10:45:13 -06:00
if (vphn_enabled)
mod_timer(&topology_timer, jiffies + topology_timer_secs * HZ);
}
#ifdef CONFIG_SMP
static void stage_topology_update(int core_id)
{
cpumask_or(&cpu_associativity_changes_mask,
&cpu_associativity_changes_mask, cpu_sibling_mask(core_id));
reset_topology_timer();
}
static int dt_update_callback(struct notifier_block *nb,
unsigned long action, void *data)
{
struct of_reconfig_data *update = data;
int rc = NOTIFY_DONE;
switch (action) {
case OF_RECONFIG_UPDATE_PROPERTY:
if (!of_prop_cmp(update->dn->type, "cpu") &&
!of_prop_cmp(update->prop->name, "ibm,associativity")) {
u32 core_id;
of_property_read_u32(update->dn, "reg", &core_id);
stage_topology_update(core_id);
rc = NOTIFY_OK;
}
break;
}
return rc;
}
static struct notifier_block dt_update_nb = {
.notifier_call = dt_update_callback,
};
#endif
/*
* Start polling for associativity changes.
*/
int start_topology_update(void)
{
int rc = 0;
if (firmware_has_feature(FW_FEATURE_PRRN)) {
if (!prrn_enabled) {
prrn_enabled = 1;
#ifdef CONFIG_SMP
rc = of_reconfig_notifier_register(&dt_update_nb);
#endif
}
}
if (firmware_has_feature(FW_FEATURE_VPHN) &&
lppaca_shared_proc(get_lppaca())) {
if (!vphn_enabled) {
vphn_enabled = 1;
setup_cpu_associativity_change_counters();
timer: Remove init_timer_deferrable() in favor of timer_setup() This refactors the only users of init_timer_deferrable() to use the new timer_setup() and from_timer(). Removes definition of init_timer_deferrable(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Sebastian Reichel <sre@kernel.org> # for drivers/hsi parts Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-wireless@vger.kernel.org Cc: Sebastian Reichel <sre@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Michael Reed <mdr@sgi.com> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-6-git-send-email-keescook@chromium.org
2017-10-04 17:26:59 -06:00
timer_setup(&topology_timer, topology_timer_fn,
TIMER_DEFERRABLE);
reset_topology_timer();
}
}
pr_info("Starting topology update%s%s\n",
(prrn_enabled ? " prrn_enabled" : ""),
(vphn_enabled ? " vphn_enabled" : ""));
return rc;
}
/*
* Disable polling for VPHN associativity changes.
*/
int stop_topology_update(void)
{
int rc = 0;
if (prrn_enabled) {
prrn_enabled = 0;
#ifdef CONFIG_SMP
rc = of_reconfig_notifier_unregister(&dt_update_nb);
#endif
}
if (vphn_enabled) {
vphn_enabled = 0;
rc = del_timer_sync(&topology_timer);
}
pr_info("Stopping topology update\n");
return rc;
}
int prrn_is_enabled(void)
{
return prrn_enabled;
}
powerpc/topology: Get topology for shared processors at boot On a shared LPAR, Phyp will not update the CPU associativity at boot time. Just after the boot system does recognize itself as a shared LPAR and trigger a request for correct CPU associativity. But by then the scheduler would have already created/destroyed its sched domains. This causes - Broken load balance across Nodes causing islands of cores. - Performance degradation esp if the system is lightly loaded - dmesg to wrongly report all CPUs to be in Node 0. - Messages in dmesg saying borken topology. - With commit 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain"), can cause rcu stalls at boot up. The sched_domains_numa_masks table which is used to generate cpumasks is only created at boot time just before creating sched domains and never updated. Hence, its better to get the topology correct before the sched domains are created. For example on 64 core Power 8 shared LPAR, dmesg reports Brought up 512 CPUs Node 0 CPUs: 0-511 Node 1 CPUs: Node 2 CPUs: Node 3 CPUs: Node 4 CPUs: Node 5 CPUs: Node 6 CPUs: Node 7 CPUs: Node 8 CPUs: Node 9 CPUs: Node 10 CPUs: Node 11 CPUs: ... BUG: arch topology borken the DIE domain not a subset of the NUMA domain BUG: arch topology borken the DIE domain not a subset of the NUMA domain numactl/lscpu output will still be correct with cores spreading across all nodes: Socket(s): 64 NUMA node(s): 12 Model: 2.0 (pvr 004d 0200) Model name: POWER8 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 64K L1i cache: 32K NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471 NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479 NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487 NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495 NUMA node4 CPU(s): 208-215,304-311,400-407,496-503 NUMA node5 CPU(s): 168-175,264-271,360-367,456-463 NUMA node6 CPU(s): 128-135,224-231,320-327,416-423 NUMA node7 CPU(s): 136-143,232-239,328-335,424-431 NUMA node8 CPU(s): 216-223,312-319,408-415,504-511 NUMA node9 CPU(s): 144-151,240-247,336-343,432-439 NUMA node10 CPU(s): 152-159,248-255,344-351,440-447 NUMA node11 CPU(s): 160-167,256-263,352-359,448-455 Currently on this LPAR, the scheduler detects 2 levels of Numa and created numa sched domains for all CPUs, but it finds a single DIE domain consisting of all CPUs. Hence it deletes all numa sched domains. To address this, detect the shared processor and update topology soon after CPUs are setup so that correct topology is updated just before scheduler creates sched domain. With the fix, dmesg reports: numa: Node 0 CPUs: 0-7 32-39 64-71 96-103 176-183 272-279 368-375 464-471 numa: Node 1 CPUs: 8-15 40-47 72-79 104-111 184-191 280-287 376-383 472-479 numa: Node 2 CPUs: 16-23 48-55 80-87 112-119 192-199 288-295 384-391 480-487 numa: Node 3 CPUs: 24-31 56-63 88-95 120-127 200-207 296-303 392-399 488-495 numa: Node 4 CPUs: 208-215 304-311 400-407 496-503 numa: Node 5 CPUs: 168-175 264-271 360-367 456-463 numa: Node 6 CPUs: 128-135 224-231 320-327 416-423 numa: Node 7 CPUs: 136-143 232-239 328-335 424-431 numa: Node 8 CPUs: 216-223 312-319 408-415 504-511 numa: Node 9 CPUs: 144-151 240-247 336-343 432-439 numa: Node 10 CPUs: 152-159 248-255 344-351 440-447 numa: Node 11 CPUs: 160-167 256-263 352-359 448-455 and lscpu also reports: Socket(s): 64 NUMA node(s): 12 Model: 2.0 (pvr 004d 0200) Model name: POWER8 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 64K L1i cache: 32K NUMA node0 CPU(s): 0-7,32-39,64-71,96-103,176-183,272-279,368-375,464-471 NUMA node1 CPU(s): 8-15,40-47,72-79,104-111,184-191,280-287,376-383,472-479 NUMA node2 CPU(s): 16-23,48-55,80-87,112-119,192-199,288-295,384-391,480-487 NUMA node3 CPU(s): 24-31,56-63,88-95,120-127,200-207,296-303,392-399,488-495 NUMA node4 CPU(s): 208-215,304-311,400-407,496-503 NUMA node5 CPU(s): 168-175,264-271,360-367,456-463 NUMA node6 CPU(s): 128-135,224-231,320-327,416-423 NUMA node7 CPU(s): 136-143,232-239,328-335,424-431 NUMA node8 CPU(s): 216-223,312-319,408-415,504-511 NUMA node9 CPU(s): 144-151,240-247,336-343,432-439 NUMA node10 CPU(s): 152-159,248-255,344-351,440-447 NUMA node11 CPU(s): 160-167,256-263,352-359,448-455 Reported-by: Manjunatha H R <manjuhr1@in.ibm.com> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> [mpe: Trim / format change log] Tested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-17 08:54:39 -06:00
void __init shared_proc_topology_init(void)
{
if (lppaca_shared_proc(get_lppaca())) {
bitmap_fill(cpumask_bits(&cpu_associativity_changes_mask),
nr_cpumask_bits);
numa_update_cpu_topology(false);
}
}
static int topology_read(struct seq_file *file, void *v)
{
if (vphn_enabled || prrn_enabled)
seq_puts(file, "on\n");
else
seq_puts(file, "off\n");
return 0;
}
static int topology_open(struct inode *inode, struct file *file)
{
return single_open(file, topology_read, NULL);
}
static ssize_t topology_write(struct file *file, const char __user *buf,
size_t count, loff_t *off)
{
char kbuf[4]; /* "on" or "off" plus null. */
int read_len;
read_len = count < 3 ? count : 3;
if (copy_from_user(kbuf, buf, read_len))
return -EINVAL;
kbuf[read_len] = '\0';
if (!strncmp(kbuf, "on", 2))
start_topology_update();
else if (!strncmp(kbuf, "off", 3))
stop_topology_update();
else
return -EINVAL;
return count;
}
static const struct file_operations topology_ops = {
.read = seq_read,
.write = topology_write,
.open = topology_open,
.release = single_release
};
static int topology_update_init(void)
{
/* Do not poll for changes if disabled at boot */
if (topology_updates_enabled)
start_topology_update();
if (vphn_enabled)
topology_schedule_update();
if (!proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops))
return -ENOMEM;
topology_inited = 1;
return 0;
}
device_initcall(topology_update_init);
#endif /* CONFIG_PPC_SPLPAR */