1
0
Fork 0
alistair23-linux/drivers/s390/block/dasd_fba.c

631 lines
18 KiB
C
Raw Normal View History

/*
* File...........: linux/drivers/s390/block/dasd_fba.c
* Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
* Bugreports.to..: <Linux390@de.ibm.com>
* Copyright IBM Corp. 1999, 2009
*/
#define KMSG_COMPONENT "dasd-fba"
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <asm/debug.h>
#include <linux/slab.h>
#include <linux/hdreg.h> /* HDIO_GETGEO */
#include <linux/bio.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/idals.h>
#include <asm/ebcdic.h>
#include <asm/io.h>
#include <asm/ccwdev.h>
#include "dasd_int.h"
#include "dasd_fba.h"
#ifdef PRINTK_HEADER
#undef PRINTK_HEADER
#endif /* PRINTK_HEADER */
#define PRINTK_HEADER "dasd(fba):"
#define DASD_FBA_CCW_WRITE 0x41
#define DASD_FBA_CCW_READ 0x42
#define DASD_FBA_CCW_LOCATE 0x43
#define DASD_FBA_CCW_DEFINE_EXTENT 0x63
MODULE_LICENSE("GPL");
static struct dasd_discipline dasd_fba_discipline;
struct dasd_fba_private {
struct dasd_fba_characteristics rdc_data;
};
static struct ccw_device_id dasd_fba_ids[] = {
{ CCW_DEVICE_DEVTYPE (0x6310, 0, 0x9336, 0), .driver_info = 0x1},
{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3370, 0), .driver_info = 0x2},
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(ccw, dasd_fba_ids);
static struct ccw_driver dasd_fba_driver; /* see below */
static int
dasd_fba_probe(struct ccw_device *cdev)
{
return dasd_generic_probe(cdev, &dasd_fba_discipline);
}
static int
dasd_fba_set_online(struct ccw_device *cdev)
{
return dasd_generic_set_online(cdev, &dasd_fba_discipline);
}
static struct ccw_driver dasd_fba_driver = {
.driver = {
.name = "dasd-fba",
.owner = THIS_MODULE,
},
.ids = dasd_fba_ids,
.probe = dasd_fba_probe,
.remove = dasd_generic_remove,
.set_offline = dasd_generic_set_offline,
.set_online = dasd_fba_set_online,
.notify = dasd_generic_notify,
.path_event = dasd_generic_path_event,
.freeze = dasd_generic_pm_freeze,
.thaw = dasd_generic_restore_device,
.restore = dasd_generic_restore_device,
};
static void
define_extent(struct ccw1 * ccw, struct DE_fba_data *data, int rw,
int blksize, int beg, int nr)
{
ccw->cmd_code = DASD_FBA_CCW_DEFINE_EXTENT;
ccw->flags = 0;
ccw->count = 16;
ccw->cda = (__u32) __pa(data);
memset(data, 0, sizeof (struct DE_fba_data));
if (rw == WRITE)
(data->mask).perm = 0x0;
else if (rw == READ)
(data->mask).perm = 0x1;
else
data->mask.perm = 0x2;
data->blk_size = blksize;
data->ext_loc = beg;
data->ext_end = nr - 1;
}
static void
locate_record(struct ccw1 * ccw, struct LO_fba_data *data, int rw,
int block_nr, int block_ct)
{
ccw->cmd_code = DASD_FBA_CCW_LOCATE;
ccw->flags = 0;
ccw->count = 8;
ccw->cda = (__u32) __pa(data);
memset(data, 0, sizeof (struct LO_fba_data));
if (rw == WRITE)
data->operation.cmd = 0x5;
else if (rw == READ)
data->operation.cmd = 0x6;
else
data->operation.cmd = 0x8;
data->blk_nr = block_nr;
data->blk_ct = block_ct;
}
static int
dasd_fba_check_characteristics(struct dasd_device *device)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
struct dasd_block *block;
struct dasd_fba_private *private;
struct ccw_device *cdev = device->cdev;
int rc;
int readonly;
private = (struct dasd_fba_private *) device->private;
if (!private) {
private = kzalloc(sizeof(*private), GFP_KERNEL | GFP_DMA);
if (!private) {
dev_warn(&device->cdev->dev,
"Allocating memory for private DASD "
"data failed\n");
return -ENOMEM;
}
device->private = (void *) private;
} else {
memset(private, 0, sizeof(*private));
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
block = dasd_alloc_block();
if (IS_ERR(block)) {
DBF_EVENT_DEVID(DBF_WARNING, cdev, "%s", "could not allocate "
"dasd block structure");
device->private = NULL;
kfree(private);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
return PTR_ERR(block);
}
device->block = block;
block->base = device;
/* Read Device Characteristics */
rc = dasd_generic_read_dev_chars(device, DASD_FBA_MAGIC,
&private->rdc_data, 32);
if (rc) {
DBF_EVENT_DEVID(DBF_WARNING, cdev, "Read device "
"characteristics returned error %d", rc);
device->block = NULL;
dasd_free_block(block);
device->private = NULL;
kfree(private);
return rc;
}
device->default_expires = DASD_EXPIRES;
device->path_data.opm = LPM_ANYPATH;
readonly = dasd_device_is_ro(device);
if (readonly)
set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
dev_info(&device->cdev->dev,
"New FBA DASD %04X/%02X (CU %04X/%02X) with %d MB "
"and %d B/blk%s\n",
cdev->id.dev_type,
cdev->id.dev_model,
cdev->id.cu_type,
cdev->id.cu_model,
((private->rdc_data.blk_bdsa *
(private->rdc_data.blk_size >> 9)) >> 11),
private->rdc_data.blk_size,
readonly ? ", read-only device" : "");
return 0;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
static int dasd_fba_do_analysis(struct dasd_block *block)
{
struct dasd_fba_private *private;
int sb, rc;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
private = (struct dasd_fba_private *) block->base->private;
rc = dasd_check_blocksize(private->rdc_data.blk_size);
if (rc) {
DBF_DEV_EVENT(DBF_WARNING, block->base, "unknown blocksize %d",
private->rdc_data.blk_size);
return rc;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
block->blocks = private->rdc_data.blk_bdsa;
block->bp_block = private->rdc_data.blk_size;
block->s2b_shift = 0; /* bits to shift 512 to get a block */
for (sb = 512; sb < private->rdc_data.blk_size; sb = sb << 1)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
block->s2b_shift++;
return 0;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
static int dasd_fba_fill_geometry(struct dasd_block *block,
struct hd_geometry *geo)
{
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
if (dasd_check_blocksize(block->bp_block) != 0)
return -EINVAL;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
geo->cylinders = (block->blocks << block->s2b_shift) >> 10;
geo->heads = 16;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
geo->sectors = 128 >> block->s2b_shift;
return 0;
}
static dasd_erp_fn_t
dasd_fba_erp_action(struct dasd_ccw_req * cqr)
{
return dasd_default_erp_action;
}
static dasd_erp_fn_t
dasd_fba_erp_postaction(struct dasd_ccw_req * cqr)
{
if (cqr->function == dasd_default_erp_action)
return dasd_default_erp_postaction;
DBF_DEV_EVENT(DBF_WARNING, cqr->startdev, "unknown ERP action %p",
cqr->function);
return NULL;
}
static void dasd_fba_check_for_device_change(struct dasd_device *device,
struct dasd_ccw_req *cqr,
struct irb *irb)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
{
char mask;
/* first of all check for state change pending interrupt */
mask = DEV_STAT_ATTENTION | DEV_STAT_DEV_END | DEV_STAT_UNIT_EXCEP;
if ((irb->scsw.cmd.dstat & mask) == mask)
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
dasd_generic_handle_state_change(device);
};
static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
struct dasd_block *block,
struct request *req)
{
struct dasd_fba_private *private;
unsigned long *idaws;
struct LO_fba_data *LO_data;
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
struct req_iterator iter;
struct bio_vec *bv;
char *dst;
int count, cidaw, cplength, datasize;
sector_t recid, first_rec, last_rec;
unsigned int blksize, off;
unsigned char cmd;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
private = (struct dasd_fba_private *) block->base->private;
if (rq_data_dir(req) == READ) {
cmd = DASD_FBA_CCW_READ;
} else if (rq_data_dir(req) == WRITE) {
cmd = DASD_FBA_CCW_WRITE;
} else
return ERR_PTR(-EINVAL);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
blksize = block->bp_block;
/* Calculate record id of first and last block. */
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 07:24:39 -06:00
first_rec = blk_rq_pos(req) >> block->s2b_shift;
last_rec =
(blk_rq_pos(req) + blk_rq_sectors(req) - 1) >> block->s2b_shift;
/* Check struct bio and count the number of blocks for the request. */
count = 0;
cidaw = 0;
rq_for_each_segment(bv, req, iter) {
if (bv->bv_len & (blksize - 1))
/* Fba can only do full blocks. */
return ERR_PTR(-EINVAL);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
count += bv->bv_len >> (block->s2b_shift + 9);
#if defined(CONFIG_64BIT)
if (idal_is_needed (page_address(bv->bv_page), bv->bv_len))
cidaw += bv->bv_len / blksize;
#endif
}
/* Paranoia. */
if (count != last_rec - first_rec + 1)
return ERR_PTR(-EINVAL);
/* 1x define extent + 1x locate record + number of blocks */
cplength = 2 + count;
/* 1x define extent + 1x locate record */
datasize = sizeof(struct DE_fba_data) + sizeof(struct LO_fba_data) +
cidaw * sizeof(unsigned long);
/*
* Find out number of additional locate record ccws if the device
* can't do data chaining.
*/
if (private->rdc_data.mode.bits.data_chain == 0) {
cplength += count - 1;
datasize += (count - 1)*sizeof(struct LO_fba_data);
}
/* Allocate the ccw request. */
cqr = dasd_smalloc_request(DASD_FBA_MAGIC, cplength, datasize, memdev);
if (IS_ERR(cqr))
return cqr;
ccw = cqr->cpaddr;
/* First ccw is define extent. */
define_extent(ccw++, cqr->data, rq_data_dir(req),
block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Tested-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by: Mike Miller <mike.miller@hp.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Borislav Petkov <petkovbb@googlemail.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Eric Moore <Eric.Moore@lsi.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Pete Zaitcev <zaitcev@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Tim Waugh <tim@cyberelk.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Dario Ballabio <ballabio_dario@emc.com> Cc: David S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: unsik Kim <donari75@gmail.com> Cc: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-07 07:24:39 -06:00
block->bp_block, blk_rq_pos(req), blk_rq_sectors(req));
/* Build locate_record + read/write ccws. */
idaws = (unsigned long *) (cqr->data + sizeof(struct DE_fba_data));
LO_data = (struct LO_fba_data *) (idaws + cidaw);
/* Locate record for all blocks for smart devices. */
if (private->rdc_data.mode.bits.data_chain != 0) {
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw++, LO_data++, rq_data_dir(req), 0, count);
}
recid = first_rec;
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
if (dasd_page_cache) {
char *copy = kmem_cache_alloc(dasd_page_cache,
GFP_DMA | __GFP_NOWARN);
if (copy && rq_data_dir(req) == WRITE)
memcpy(copy + bv->bv_offset, dst, bv->bv_len);
if (copy)
dst = copy + bv->bv_offset;
}
for (off = 0; off < bv->bv_len; off += blksize) {
/* Locate record for stupid devices. */
if (private->rdc_data.mode.bits.data_chain == 0) {
ccw[-1].flags |= CCW_FLAG_CC;
locate_record(ccw, LO_data++,
rq_data_dir(req),
recid - first_rec, 1);
ccw->flags = CCW_FLAG_CC;
ccw++;
} else {
if (recid > first_rec)
ccw[-1].flags |= CCW_FLAG_DC;
else
ccw[-1].flags |= CCW_FLAG_CC;
}
ccw->cmd_code = cmd;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
ccw->count = block->bp_block;
if (idal_is_needed(dst, blksize)) {
ccw->cda = (__u32)(addr_t) idaws;
ccw->flags = CCW_FLAG_IDA;
idaws = idal_create_words(idaws, dst, blksize);
} else {
ccw->cda = (__u32)(addr_t) dst;
ccw->flags = 0;
}
ccw++;
dst += blksize;
recid++;
}
}
if (blk_noretry_request(req) ||
block->base->features & DASD_FEATURE_FAILFAST)
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
cqr->startdev = memdev;
cqr->memdev = memdev;
cqr->block = block;
cqr->expires = memdev->default_expires * HZ; /* default 5 minutes */
cqr->retries = 32;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
return cqr;
}
static int
dasd_fba_free_cp(struct dasd_ccw_req *cqr, struct request *req)
{
struct dasd_fba_private *private;
struct ccw1 *ccw;
struct req_iterator iter;
struct bio_vec *bv;
char *dst, *cda;
unsigned int blksize, off;
int status;
if (!dasd_page_cache)
goto out;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
private = (struct dasd_fba_private *) cqr->block->base->private;
blksize = cqr->block->bp_block;
ccw = cqr->cpaddr;
/* Skip over define extent & locate record. */
ccw++;
if (private->rdc_data.mode.bits.data_chain != 0)
ccw++;
rq_for_each_segment(bv, req, iter) {
dst = page_address(bv->bv_page) + bv->bv_offset;
for (off = 0; off < bv->bv_len; off += blksize) {
/* Skip locate record. */
if (private->rdc_data.mode.bits.data_chain == 0)
ccw++;
if (dst) {
if (ccw->flags & CCW_FLAG_IDA)
cda = *((char **)((addr_t) ccw->cda));
else
cda = (char *)((addr_t) ccw->cda);
if (dst != cda) {
if (rq_data_dir(req) == READ)
memcpy(dst, cda, bv->bv_len);
kmem_cache_free(dasd_page_cache,
(void *)((addr_t)cda & PAGE_MASK));
}
dst = NULL;
}
ccw++;
}
}
out:
status = cqr->status == DASD_CQR_DONE;
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
dasd_sfree_request(cqr, cqr->memdev);
return status;
}
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
static void dasd_fba_handle_terminated_request(struct dasd_ccw_req *cqr)
{
cqr->status = DASD_CQR_FILLED;
};
static int
dasd_fba_fill_info(struct dasd_device * device,
struct dasd_information2_t * info)
{
info->label_block = 1;
info->FBA_layout = 1;
info->format = DASD_FORMAT_LDL;
info->characteristics_size = sizeof(struct dasd_fba_characteristics);
memcpy(info->characteristics,
&((struct dasd_fba_private *) device->private)->rdc_data,
sizeof (struct dasd_fba_characteristics));
info->confdata_size = 0;
return 0;
}
static void
dasd_fba_dump_sense_dbf(struct dasd_device *device, struct irb *irb,
char *reason)
{
u64 *sense;
sense = (u64 *) dasd_get_sense(irb);
if (sense) {
DBF_DEV_EVENT(DBF_EMERG, device,
"%s: %s %02x%02x%02x %016llx %016llx %016llx "
"%016llx", reason,
scsw_is_tm(&irb->scsw) ? "t" : "c",
scsw_cc(&irb->scsw), scsw_cstat(&irb->scsw),
scsw_dstat(&irb->scsw), sense[0], sense[1],
sense[2], sense[3]);
} else {
DBF_DEV_EVENT(DBF_EMERG, device, "%s",
"SORRY - NO VALID SENSE AVAILABLE\n");
}
}
static void
dasd_fba_dump_sense(struct dasd_device *device, struct dasd_ccw_req * req,
struct irb *irb)
{
char *page;
struct ccw1 *act, *end, *last;
int len, sl, sct, count;
page = (char *) get_zeroed_page(GFP_ATOMIC);
if (page == NULL) {
DBF_DEV_EVENT(DBF_WARNING, device, "%s",
"No memory to dump sense data");
return;
}
len = sprintf(page, KERN_ERR PRINTK_HEADER
" I/O status report for device %s:\n",
dev_name(&device->cdev->dev));
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" in req: %p CS: 0x%02X DS: 0x%02X\n", req,
irb->scsw.cmd.cstat, irb->scsw.cmd.dstat);
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" device %s: Failing CCW: %p\n",
dev_name(&device->cdev->dev),
(void *) (addr_t) irb->scsw.cmd.cpa);
if (irb->esw.esw0.erw.cons) {
for (sl = 0; sl < 4; sl++) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" Sense(hex) %2d-%2d:",
(8 * sl), ((8 * sl) + 7));
for (sct = 0; sct < 8; sct++) {
len += sprintf(page + len, " %02x",
irb->ecw[8 * sl + sct]);
}
len += sprintf(page + len, "\n");
}
} else {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" SORRY - NO VALID SENSE AVAILABLE\n");
}
printk(KERN_ERR "%s", page);
/* dump the Channel Program */
/* print first CCWs (maximum 8) */
act = req->cpaddr;
for (last = act; last->flags & (CCW_FLAG_CC | CCW_FLAG_DC); last++);
end = min(act + 8, last);
len = sprintf(page, KERN_ERR PRINTK_HEADER
" Related CP in req: %p\n", req);
while (act <= end) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" CCW %p: %08X %08X DAT:",
act, ((int *) act)[0], ((int *) act)[1]);
for (count = 0; count < 32 && count < act->count;
count += sizeof(int))
len += sprintf(page + len, " %08X",
((int *) (addr_t) act->cda)
[(count>>2)]);
len += sprintf(page + len, "\n");
act++;
}
printk(KERN_ERR "%s", page);
/* print failing CCW area */
len = 0;
if (act < ((struct ccw1 *)(addr_t) irb->scsw.cmd.cpa) - 2) {
act = ((struct ccw1 *)(addr_t) irb->scsw.cmd.cpa) - 2;
len += sprintf(page + len, KERN_ERR PRINTK_HEADER "......\n");
}
end = min((struct ccw1 *)(addr_t) irb->scsw.cmd.cpa + 2, last);
while (act <= end) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" CCW %p: %08X %08X DAT:",
act, ((int *) act)[0], ((int *) act)[1]);
for (count = 0; count < 32 && count < act->count;
count += sizeof(int))
len += sprintf(page + len, " %08X",
((int *) (addr_t) act->cda)
[(count>>2)]);
len += sprintf(page + len, "\n");
act++;
}
/* print last CCWs */
if (act < last - 2) {
act = last - 2;
len += sprintf(page + len, KERN_ERR PRINTK_HEADER "......\n");
}
while (act <= last) {
len += sprintf(page + len, KERN_ERR PRINTK_HEADER
" CCW %p: %08X %08X DAT:",
act, ((int *) act)[0], ((int *) act)[1]);
for (count = 0; count < 32 && count < act->count;
count += sizeof(int))
len += sprintf(page + len, " %08X",
((int *) (addr_t) act->cda)
[(count>>2)]);
len += sprintf(page + len, "\n");
act++;
}
if (len > 0)
printk(KERN_ERR "%s", page);
free_page((unsigned long) page);
}
/*
* max_blocks is dependent on the amount of storage that is available
* in the static io buffer for each device. Currently each device has
* 8192 bytes (=2 pages). For 64 bit one dasd_mchunkt_t structure has
* 24 bytes, the struct dasd_ccw_req has 136 bytes and each block can use
* up to 16 bytes (8 for the ccw and 8 for the idal pointer). In
* addition we have one define extent ccw + 16 bytes of data and a
* locate record ccw for each block (stupid devices!) + 16 bytes of data.
* That makes:
* (8192 - 24 - 136 - 8 - 16) / 40 = 200.2 blocks at maximum.
* We want to fit two into the available memory so that we can immediately
* start the next request if one finishes off. That makes 100.1 blocks
* for one request. Give a little safety and the result is 96.
*/
static struct dasd_discipline dasd_fba_discipline = {
.owner = THIS_MODULE,
.name = "FBA ",
.ebcname = "FBA ",
.max_blocks = 96,
.check_device = dasd_fba_check_characteristics,
.do_analysis = dasd_fba_do_analysis,
.verify_path = dasd_generic_verify_path,
.fill_geometry = dasd_fba_fill_geometry,
.start_IO = dasd_start_IO,
.term_IO = dasd_term_IO,
[S390] dasd: add hyper PAV support to DASD device driver, part 1 Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26 06:11:23 -07:00
.handle_terminated_request = dasd_fba_handle_terminated_request,
.erp_action = dasd_fba_erp_action,
.erp_postaction = dasd_fba_erp_postaction,
.check_for_device_change = dasd_fba_check_for_device_change,
.build_cp = dasd_fba_build_cp,
.free_cp = dasd_fba_free_cp,
.dump_sense = dasd_fba_dump_sense,
.dump_sense_dbf = dasd_fba_dump_sense_dbf,
.fill_info = dasd_fba_fill_info,
};
static int __init
dasd_fba_init(void)
{
int ret;
ASCEBC(dasd_fba_discipline.ebcname, 4);
ret = ccw_driver_register(&dasd_fba_driver);
if (!ret)
wait_for_device_probe();
return ret;
}
static void __exit
dasd_fba_cleanup(void)
{
ccw_driver_unregister(&dasd_fba_driver);
}
module_init(dasd_fba_init);
module_exit(dasd_fba_cleanup);