1
0
Fork 0
alistair23-linux/drivers/firewire/nosy.c

685 lines
17 KiB
C
Raw Normal View History

/*
* nosy - Snoop mode driver for TI PCILynx 1394 controllers
* Copyright (C) 2002-2007 Kristian Høgsberg
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/errno.h>
#include <linux/fs.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
#include <linux/pci.h>
#include <linux/poll.h>
#include <linux/sched.h> /* required for linux/wait.h */
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/timex.h>
#include <linux/uaccess.h>
#include <linux/wait.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
#include <asm/atomic.h>
#include <asm/byteorder.h>
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
#include "nosy.h"
#include "nosy-user.h"
#define TCODE_PHY_PACKET 0x10
#define PCI_DEVICE_ID_TI_PCILYNX 0x8000
#define notify(s, args...) printk(KERN_NOTICE s, ## args)
#define error(s, args...) printk(KERN_ERR s, ## args)
#define debug(s, args...) printk(KERN_DEBUG s, ## args)
static char driver_name[] = KBUILD_MODNAME;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
struct pcl_status {
unsigned int transfer_count : 13;
unsigned int reserved0 : 1;
unsigned int ack_type : 1;
unsigned int ack : 4;
unsigned int rcv_speed : 2;
unsigned int rcv_dma_channel : 6;
unsigned int packet_complete : 1;
unsigned int packet_error : 1;
unsigned int master_error : 1;
unsigned int iso_mode : 1;
unsigned int self_id : 1;
};
/* this is the physical layout of a PCL, its size is 128 bytes */
struct pcl {
u32 next;
u32 async_error_next;
u32 user_data;
struct pcl_status pcl_status;
u32 remaining_transfer_count;
u32 next_data_buffer;
struct {
u32 control;
u32 pointer;
} buffer[13] __attribute__ ((packed));
} __attribute__ ((packed));
struct packet {
unsigned int length;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
char data[0];
};
struct packet_buffer {
char *data;
size_t capacity;
long total_packet_count, lost_packet_count;
atomic_t size;
struct packet *head, *tail;
wait_queue_head_t wait;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
};
struct pcilynx {
struct pci_dev *pci_device;
unsigned char *registers;
struct pcl *rcv_start_pcl, *rcv_pcl;
u32 *rcv_buffer;
dma_addr_t rcv_start_pcl_bus, rcv_pcl_bus, rcv_buffer_bus;
spinlock_t client_list_lock;
struct list_head client_list;
struct miscdevice misc;
};
struct client {
struct pcilynx *lynx;
u32 tcode_mask;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
struct packet_buffer buffer;
struct list_head link;
};
#define MAX_MINORS 64
static struct pcilynx *minors[MAX_MINORS];
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
static int
packet_buffer_init(struct packet_buffer *buffer, size_t capacity)
{
buffer->data = kmalloc(capacity, GFP_KERNEL);
if (buffer->data == NULL)
return -ENOMEM;
buffer->head = (struct packet *) buffer->data;
buffer->tail = (struct packet *) buffer->data;
buffer->capacity = capacity;
buffer->lost_packet_count = 0;
atomic_set(&buffer->size, 0);
init_waitqueue_head(&buffer->wait);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
return 0;
}
static void
packet_buffer_destroy(struct packet_buffer *buffer)
{
kfree(buffer->data);
}
static int
packet_buffer_get(struct packet_buffer *buffer, void *data, size_t user_length)
{
size_t length;
char *end;
if (wait_event_interruptible(buffer->wait,
atomic_read(&buffer->size) > 0))
return -ERESTARTSYS;
/* FIXME: Check length <= user_length. */
end = buffer->data + buffer->capacity;
length = buffer->head->length;
if (&buffer->head->data[length] < end) {
if (copy_to_user(data, buffer->head->data, length))
return -EFAULT;
buffer->head = (struct packet *) &buffer->head->data[length];
} else {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
size_t split = end - buffer->head->data;
if (copy_to_user(data, buffer->head->data, split))
return -EFAULT;
if (copy_to_user(data + split, buffer->data, length - split))
return -EFAULT;
buffer->head = (struct packet *) &buffer->data[length - split];
}
/*
* Decrease buffer->size as the last thing, since this is what
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
* keeps the interrupt from overwriting the packet we are
* retrieving from the buffer.
*/
atomic_sub(sizeof(struct packet) + length, &buffer->size);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
return length;
}
static void
packet_buffer_put(struct packet_buffer *buffer, void *data, size_t length)
{
char *end;
buffer->total_packet_count++;
if (buffer->capacity <
atomic_read(&buffer->size) + sizeof(struct packet) + length) {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
buffer->lost_packet_count++;
return;
}
end = buffer->data + buffer->capacity;
buffer->tail->length = length;
if (&buffer->tail->data[length] < end) {
memcpy(buffer->tail->data, data, length);
buffer->tail = (struct packet *) &buffer->tail->data[length];
} else {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
size_t split = end - buffer->tail->data;
memcpy(buffer->tail->data, data, split);
memcpy(buffer->data, data + split, length - split);
buffer->tail = (struct packet *) &buffer->data[length - split];
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
/* Finally, adjust buffer size and wake up userspace reader. */
atomic_add(sizeof(struct packet) + length, &buffer->size);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
wake_up_interruptible(&buffer->wait);
}
static inline void
reg_write(struct pcilynx *lynx, int offset, u32 data)
{
writel(data, lynx->registers + offset);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
static inline u32
reg_read(struct pcilynx *lynx, int offset)
{
return readl(lynx->registers + offset);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
static inline void
reg_set_bits(struct pcilynx *lynx, int offset, u32 mask)
{
reg_write(lynx, offset, (reg_read(lynx, offset) | mask));
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
/*
* Maybe the pcl programs could be set up to just append data instead
* of using a whole packet.
*/
static inline void
run_pcl(struct pcilynx *lynx, dma_addr_t pcl_bus,
int dmachan)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
{
reg_write(lynx, DMA0_CURRENT_PCL + dmachan * 0x20, pcl_bus);
reg_write(lynx, DMA0_CHAN_CTRL + dmachan * 0x20,
DMA_CHAN_CTRL_ENABLE | DMA_CHAN_CTRL_LINK);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
static int
set_phy_reg(struct pcilynx *lynx, int addr, int val)
{
if (addr > 15) {
debug("PHY register address %d out of range\n", addr);
return -1;
}
if (val > 0xff) {
debug("PHY register value %d out of range\n", val);
return -1;
}
reg_write(lynx, LINK_PHY, LINK_PHY_WRITE |
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
LINK_PHY_ADDR(addr) | LINK_PHY_WDATA(val));
return 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
static void
nosy_start_snoop(struct client *client)
{
unsigned long flags;
spin_lock_irqsave(&client->lynx->client_list_lock, flags);
list_add_tail(&client->link, &client->lynx->client_list);
spin_unlock_irqrestore(&client->lynx->client_list_lock, flags);
}
static void
nosy_stop_snoop(struct client *client)
{
unsigned long flags;
spin_lock_irqsave(&client->lynx->client_list_lock, flags);
list_del_init(&client->link);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
spin_unlock_irqrestore(&client->lynx->client_list_lock, flags);
}
static struct client *
nosy_add_client(struct pcilynx *lynx)
{
struct client *client;
client = kmalloc(sizeof *client, GFP_KERNEL);
client->tcode_mask = ~0;
client->lynx = lynx;
INIT_LIST_HEAD(&client->link);
if (packet_buffer_init(&client->buffer, 128 * 1024) < 0) {
kfree(client);
debug("Failed to allocate packet buffer\n");
return NULL;
}
return client;
}
static void
nosy_remove_client(struct client *client)
{
nosy_stop_snoop(client);
packet_buffer_destroy(&client->buffer);
kfree(client);
}
static int
nosy_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
if (minor > MAX_MINORS || minors[minor] == NULL)
return -ENODEV;
file->private_data = nosy_add_client(minors[minor]);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
if (file->private_data == NULL)
return -ENOMEM;
else
return 0;
}
static int
nosy_release(struct inode *inode, struct file *file)
{
nosy_remove_client(file->private_data);
return 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
static unsigned int
nosy_poll(struct file *file, poll_table *pt)
{
struct client *client = file->private_data;
poll_wait(file, &client->buffer.wait, pt);
if (atomic_read(&client->buffer.size) > 0)
return POLLIN | POLLRDNORM;
else
return 0;
}
static ssize_t
nosy_read(struct file *file, char *buffer, size_t count, loff_t *offset)
{
struct client *client = file->private_data;
return packet_buffer_get(&client->buffer, buffer, count);
}
static long
nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
{
struct client *client = file->private_data;
spinlock_t *client_list_lock = &client->lynx->client_list_lock;
struct nosy_stats stats;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
switch (cmd) {
case NOSY_IOC_GET_STATS:
spin_lock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
stats.total_packet_count = client->buffer.total_packet_count;
stats.lost_packet_count = client->buffer.lost_packet_count;
spin_unlock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
if (copy_to_user((void *) arg, &stats, sizeof stats))
return -EFAULT;
else
return 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
case NOSY_IOC_START:
nosy_start_snoop(client);
return 0;
case NOSY_IOC_STOP:
nosy_stop_snoop(client);
return 0;
case NOSY_IOC_FILTER:
spin_lock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
client->tcode_mask = arg;
spin_unlock_irq(client_list_lock);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
return 0;
default:
return -EINVAL;
/* Flush buffer, configure filter. */
}
}
static const struct file_operations nosy_ops = {
.owner = THIS_MODULE,
.read = nosy_read,
.unlocked_ioctl = nosy_ioctl,
.poll = nosy_poll,
.open = nosy_open,
.release = nosy_release,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
};
#define PHY_PACKET_SIZE 12 /* 1 payload, 1 inverse, 1 ack = 3 quadlets */
struct link_packet {
unsigned int priority : 4;
unsigned int tcode : 4;
unsigned int rt : 2;
unsigned int tlabel : 6;
unsigned int destination : 16;
};
static void
packet_handler(struct pcilynx *lynx)
{
unsigned long flags;
struct client *client;
u32 tcode_mask;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
size_t length;
struct link_packet *packet;
struct timeval tv;
/* FIXME: Also report rcv_speed. */
length = lynx->rcv_pcl->pcl_status.transfer_count;
packet = (struct link_packet *) &lynx->rcv_buffer[1];
do_gettimeofday(&tv);
lynx->rcv_buffer[0] = tv.tv_usec;
if (length == PHY_PACKET_SIZE)
tcode_mask = 1 << TCODE_PHY_PACKET;
else
tcode_mask = 1 << packet->tcode;
spin_lock_irqsave(&lynx->client_list_lock, flags);
list_for_each_entry(client, &lynx->client_list, link)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
if (client->tcode_mask & tcode_mask)
packet_buffer_put(&client->buffer,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx->rcv_buffer, length + 4);
spin_unlock_irqrestore(&lynx->client_list_lock, flags);
}
static void
bus_reset_handler(struct pcilynx *lynx)
{
unsigned long flags;
struct client *client;
struct timeval tv;
do_gettimeofday(&tv);
spin_lock_irqsave(&lynx->client_list_lock, flags);
list_for_each_entry(client, &lynx->client_list, link)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
packet_buffer_put(&client->buffer, &tv.tv_usec, 4);
spin_unlock_irqrestore(&lynx->client_list_lock, flags);
}
static irqreturn_t
irq_handler(int irq, void *device)
{
struct pcilynx *lynx = device;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
u32 pci_int_status;
pci_int_status = reg_read(lynx, PCI_INT_STATUS);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
if ((pci_int_status & PCI_INT_INT_PEND) == 0)
/* Not our interrupt, bail out quickly. */
return IRQ_NONE;
if ((pci_int_status & PCI_INT_P1394_INT) != 0) {
u32 link_int_status;
link_int_status = reg_read(lynx, LINK_INT_STATUS);
reg_write(lynx, LINK_INT_STATUS, link_int_status);
if ((link_int_status & LINK_INT_PHY_BUSRESET) > 0)
bus_reset_handler(lynx);
}
/* Clear the PCI_INT_STATUS register only after clearing the
* LINK_INT_STATUS register; otherwise the PCI_INT_P1394 will
* be set again immediately. */
reg_write(lynx, PCI_INT_STATUS, pci_int_status);
if ((pci_int_status & PCI_INT_DMA0_HLT) > 0) {
packet_handler(lynx);
run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
}
return IRQ_HANDLED;
}
static void
remove_card(struct pci_dev *dev)
{
struct pcilynx *lynx;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx = pci_get_drvdata(dev);
if (!lynx)
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
return;
pci_set_drvdata(dev, NULL);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
reg_write(lynx, PCI_INT_ENABLE, 0);
free_irq(lynx->pci_device->irq, lynx);
pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx->rcv_start_pcl, lynx->rcv_start_pcl_bus);
pci_free_consistent(lynx->pci_device, sizeof(struct pcl),
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx->rcv_pcl, lynx->rcv_pcl_bus);
pci_free_consistent(lynx->pci_device, PAGE_SIZE,
lynx->rcv_buffer, lynx->rcv_buffer_bus);
iounmap(lynx->registers);
minors[lynx->misc.minor] = NULL;
misc_deregister(&lynx->misc);
kfree(lynx);
}
#define RCV_BUFFER_SIZE (16 * 1024)
static int __devinit
add_card(struct pci_dev *dev, const struct pci_device_id *unused)
{
struct pcilynx *lynx;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
u32 p, end;
int i;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
if (pci_set_dma_mask(dev, 0xffffffff)) {
error("DMA address limits not supported "
"for PCILynx hardware\n");
return -ENXIO;
}
if (pci_enable_device(dev)) {
error("Failed to enable PCILynx hardware\n");
return -ENXIO;
}
pci_set_master(dev);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx = kzalloc(sizeof *lynx, GFP_KERNEL);
if (lynx == NULL) {
error("Failed to allocate control structure memory\n");
return -ENOMEM;
}
lynx->pci_device = dev;
pci_set_drvdata(dev, lynx);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
spin_lock_init(&lynx->client_list_lock);
INIT_LIST_HEAD(&lynx->client_list);
lynx->registers = ioremap_nocache(pci_resource_start(dev, 0),
PCILYNX_MAX_REGISTER);
lynx->rcv_start_pcl = pci_alloc_consistent(lynx->pci_device,
sizeof(struct pcl), &lynx->rcv_start_pcl_bus);
lynx->rcv_pcl = pci_alloc_consistent(lynx->pci_device,
sizeof(struct pcl), &lynx->rcv_pcl_bus);
lynx->rcv_buffer = pci_alloc_consistent(lynx->pci_device,
RCV_BUFFER_SIZE, &lynx->rcv_buffer_bus);
if (lynx->rcv_start_pcl == NULL ||
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx->rcv_pcl == NULL ||
lynx->rcv_buffer == NULL) {
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
/* FIXME: do proper error handling. */
error("Failed to allocate receive buffer\n");
return -ENOMEM;
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx->rcv_start_pcl->next = lynx->rcv_pcl_bus;
lynx->rcv_pcl->next = PCL_NEXT_INVALID;
lynx->rcv_pcl->async_error_next = PCL_NEXT_INVALID;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx->rcv_pcl->buffer[0].control =
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
PCL_CMD_RCV | PCL_BIGENDIAN | 2044;
lynx->rcv_pcl->buffer[0].pointer = lynx->rcv_buffer_bus + 4;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
p = lynx->rcv_buffer_bus + 2048;
end = lynx->rcv_buffer_bus + RCV_BUFFER_SIZE;
for (i = 1; p < end; i++, p += 2048) {
lynx->rcv_pcl->buffer[i].control =
PCL_CMD_RCV | PCL_BIGENDIAN | 2048;
lynx->rcv_pcl->buffer[i].pointer = p;
}
lynx->rcv_pcl->buffer[i - 1].control |= PCL_LAST_BUFF;
reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET);
/* Fix buggy cards with autoboot pin not tied low: */
reg_write(lynx, DMA0_CHAN_CTRL, 0);
reg_write(lynx, DMA_GLOBAL_REGISTER, 0x00 << 24);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
#if 0
/* now, looking for PHY register set */
if ((get_phy_reg(lynx, 2) & 0xe0) == 0xe0) {
lynx->phyic.reg_1394a = 1;
PRINT(KERN_INFO, lynx->id,
"found 1394a conform PHY (using extended register set)");
lynx->phyic.vendor = get_phy_vendorid(lynx);
lynx->phyic.product = get_phy_productid(lynx);
} else {
lynx->phyic.reg_1394a = 0;
PRINT(KERN_INFO, lynx->id, "found old 1394 PHY");
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
#endif
/* Setup the general receive FIFO max size. */
reg_write(lynx, FIFO_SIZES, 255);
reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
reg_write(lynx, LINK_INT_ENABLE,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
LINK_INT_PHY_TIME_OUT | LINK_INT_PHY_REG_RCVD |
LINK_INT_PHY_BUSRESET | LINK_INT_IT_STUCK |
LINK_INT_AT_STUCK | LINK_INT_SNTRJ |
LINK_INT_TC_ERR | LINK_INT_GRF_OVER_FLOW |
LINK_INT_ITF_UNDER_FLOW | LINK_INT_ATF_UNDER_FLOW);
/* Disable the L flag in self ID packets. */
set_phy_reg(lynx, 4, 0);
/* Put this baby into snoop mode */
reg_set_bits(lynx, LINK_CONTROL, LINK_CONTROL_SNOOP_ENABLE);
run_pcl(lynx, lynx->rcv_start_pcl_bus, 0);
if (request_irq(dev->irq, irq_handler, IRQF_SHARED,
driver_name, lynx)) {
error("Failed to allocate shared interrupt %d\n", dev->irq);
return -EIO;
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
lynx->misc.parent = &dev->dev;
lynx->misc.minor = MISC_DYNAMIC_MINOR;
lynx->misc.name = "nosy";
lynx->misc.fops = &nosy_ops;
if (misc_register(&lynx->misc)) {
error("Failed to register misc char device\n");
return -ENOMEM;
}
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
minors[lynx->misc.minor] = lynx;
notify("Initialized PCILynx IEEE1394 card, irq=%d\n", dev->irq);
return 0;
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
static struct pci_device_id pci_table[] __devinitdata = {
{
.vendor = PCI_VENDOR_ID_TI,
.device = PCI_DEVICE_ID_TI_PCILYNX,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
},
{ } /* Terminating entry */
};
static struct pci_driver lynx_pci_driver = {
.name = driver_name,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
.id_table = pci_table,
.probe = add_card,
.remove = remove_card,
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
};
MODULE_AUTHOR("Kristian Hoegsberg");
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
MODULE_DESCRIPTION("Snoop mode driver for TI pcilynx 1394 controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pci_table);
static int __init nosy_init(void)
{
return pci_register_driver(&lynx_pci_driver);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
}
static void __exit nosy_cleanup(void)
{
pci_unregister_driver(&lynx_pci_driver);
firewire: new driver: nosy - IEEE 1394 traffic sniffer This adds the traffic sniffer driver for Texas Instruments PCILynx/ PCILynx2 based cards. The use cases for nosy are analysis of nonstandard protocols and as an aid in development of drivers, applications, or firmwares. Author of the driver is Kristian Høgsberg. Known contributers are Jody McIntyre and Jonathan Woithe. Nosy programs PCILynx chips to operate in promiscuous mode, which is a feature that is not found in OHCI-1394 controllers. Hence, only special hardware as mentioned in the Kconfig help text is suitable for nosy. This is only the kernelspace part of nosy. There is a userspace interface to it, called nosy-dump, proposed to be added into the tools/ subdirectory of the kernel sources in a subsequent change. Kernelspace and userspave component of nosy communicate via a 'misc' character device file called /dev/nosy with a simple ioctl() and read() based protocol, as described by nosy-user.h. The files added here are taken from git://anongit.freedesktop.org/~krh/nosy commit ee29be97 (2009-11-10) with the following changes by Stefan Richter: - Kconfig and Makefile hunks are written from scratch. - Commented out version printk in nosy.c. - Included missing <linux/sched.h>, reported by Stephen Rothwell. "git shortlog nosy{-user.h,.c,.h}" from nosy's git repository: Jonathan Woithe (2): Nosy updates for recent kernels Fix uninitialised memory (needed for 2.6.31 kernel) Kristian Høgsberg (5): Pull over nosy from mercurial repo. Use a misc device instead. Add simple AV/C decoder. Don't break down on big payloads. Set parent device for misc device. As a low-level IEEE 1394 driver, its files are placed into drivers/firewire/ although nosy is not part of the firewire driver stack. I am aware of the following literature from Texas Instruments about PCILynx programming: SCPA020A - PCILynx 1394 to PCI Bus Interface TSB12LV21BPGF Functional Specification SLLA023 - Initialization and Asynchronous Programming of the TSB12LV21A 1394 Device Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2010-07-27 02:26:33 -06:00
notify("Unloaded %s.\n", driver_name);
}
module_init(nosy_init);
module_exit(nosy_cleanup);