1
0
Fork 0
alistair23-linux/drivers/scsi/fcoe/fcoe_transport.c

1057 lines
27 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* Maintained at www.Open-FCoE.org
*/
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/errno.h>
#include <linux/crc32.h>
#include <scsi/libfcoe.h>
#include "libfcoe.h"
MODULE_AUTHOR("Open-FCoE.org");
MODULE_DESCRIPTION("FIP discovery protocol and FCoE transport for FCoE HBAs");
MODULE_LICENSE("GPL v2");
static int fcoe_transport_create(const char *, const struct kernel_param *);
static int fcoe_transport_destroy(const char *, const struct kernel_param *);
static int fcoe_transport_show(char *buffer, const struct kernel_param *kp);
static struct fcoe_transport *fcoe_transport_lookup(struct net_device *device);
static struct fcoe_transport *fcoe_netdev_map_lookup(struct net_device *device);
static int fcoe_transport_enable(const char *, const struct kernel_param *);
static int fcoe_transport_disable(const char *, const struct kernel_param *);
static int libfcoe_device_notification(struct notifier_block *notifier,
ulong event, void *ptr);
static LIST_HEAD(fcoe_transports);
static DEFINE_MUTEX(ft_mutex);
static LIST_HEAD(fcoe_netdevs);
static DEFINE_MUTEX(fn_mutex);
unsigned int libfcoe_debug_logging;
module_param_named(debug_logging, libfcoe_debug_logging, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
module_param_call(show, NULL, fcoe_transport_show, NULL, S_IRUSR);
__MODULE_PARM_TYPE(show, "string");
MODULE_PARM_DESC(show, " Show attached FCoE transports");
module_param_call(create, fcoe_transport_create, NULL,
(void *)FIP_MODE_FABRIC, S_IWUSR);
__MODULE_PARM_TYPE(create, "string");
MODULE_PARM_DESC(create, " Creates fcoe instance on an ethernet interface");
module_param_call(create_vn2vn, fcoe_transport_create, NULL,
(void *)FIP_MODE_VN2VN, S_IWUSR);
__MODULE_PARM_TYPE(create_vn2vn, "string");
MODULE_PARM_DESC(create_vn2vn, " Creates a VN_node to VN_node FCoE instance "
"on an Ethernet interface");
module_param_call(destroy, fcoe_transport_destroy, NULL, NULL, S_IWUSR);
__MODULE_PARM_TYPE(destroy, "string");
MODULE_PARM_DESC(destroy, " Destroys fcoe instance on an ethernet interface");
module_param_call(enable, fcoe_transport_enable, NULL, NULL, S_IWUSR);
__MODULE_PARM_TYPE(enable, "string");
MODULE_PARM_DESC(enable, " Enables fcoe on an ethernet interface.");
module_param_call(disable, fcoe_transport_disable, NULL, NULL, S_IWUSR);
__MODULE_PARM_TYPE(disable, "string");
MODULE_PARM_DESC(disable, " Disables fcoe on an ethernet interface.");
/* notification function for packets from net device */
static struct notifier_block libfcoe_notifier = {
.notifier_call = libfcoe_device_notification,
};
static const struct {
u32 fc_port_speed;
#define SPEED_2000 2000
#define SPEED_4000 4000
#define SPEED_8000 8000
#define SPEED_16000 16000
#define SPEED_32000 32000
u32 eth_port_speed;
} fcoe_port_speed_mapping[] = {
{ FC_PORTSPEED_1GBIT, SPEED_1000 },
{ FC_PORTSPEED_2GBIT, SPEED_2000 },
{ FC_PORTSPEED_4GBIT, SPEED_4000 },
{ FC_PORTSPEED_8GBIT, SPEED_8000 },
{ FC_PORTSPEED_10GBIT, SPEED_10000 },
{ FC_PORTSPEED_16GBIT, SPEED_16000 },
{ FC_PORTSPEED_20GBIT, SPEED_20000 },
{ FC_PORTSPEED_25GBIT, SPEED_25000 },
{ FC_PORTSPEED_32GBIT, SPEED_32000 },
{ FC_PORTSPEED_40GBIT, SPEED_40000 },
{ FC_PORTSPEED_50GBIT, SPEED_50000 },
{ FC_PORTSPEED_100GBIT, SPEED_100000 },
};
static inline u32 eth2fc_speed(u32 eth_port_speed)
{
int i;
for (i = 0; i < ARRAY_SIZE(fcoe_port_speed_mapping); i++) {
if (fcoe_port_speed_mapping[i].eth_port_speed == eth_port_speed)
return fcoe_port_speed_mapping[i].fc_port_speed;
}
return FC_PORTSPEED_UNKNOWN;
}
/**
* fcoe_link_speed_update() - Update the supported and actual link speeds
* @lport: The local port to update speeds for
*
* Returns: 0 if the ethtool query was successful
* -1 if the ethtool query failed
*/
int fcoe_link_speed_update(struct fc_lport *lport)
{
struct net_device *netdev = fcoe_get_netdev(lport);
struct ethtool_link_ksettings ecmd;
if (!__ethtool_get_link_ksettings(netdev, &ecmd)) {
lport->link_supported_speeds &= ~(FC_PORTSPEED_1GBIT |
FC_PORTSPEED_10GBIT |
FC_PORTSPEED_20GBIT |
FC_PORTSPEED_40GBIT);
if (ecmd.link_modes.supported[0] & (
SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseKX_Full))
lport->link_supported_speeds |= FC_PORTSPEED_1GBIT;
if (ecmd.link_modes.supported[0] & (
SUPPORTED_10000baseT_Full |
SUPPORTED_10000baseKX4_Full |
SUPPORTED_10000baseKR_Full |
SUPPORTED_10000baseR_FEC))
lport->link_supported_speeds |= FC_PORTSPEED_10GBIT;
if (ecmd.link_modes.supported[0] & (
SUPPORTED_20000baseMLD2_Full |
SUPPORTED_20000baseKR2_Full))
lport->link_supported_speeds |= FC_PORTSPEED_20GBIT;
if (ecmd.link_modes.supported[0] & (
SUPPORTED_40000baseKR4_Full |
SUPPORTED_40000baseCR4_Full |
SUPPORTED_40000baseSR4_Full |
SUPPORTED_40000baseLR4_Full))
lport->link_supported_speeds |= FC_PORTSPEED_40GBIT;
lport->link_speed = eth2fc_speed(ecmd.base.speed);
return 0;
}
return -1;
}
EXPORT_SYMBOL_GPL(fcoe_link_speed_update);
/**
* __fcoe_get_lesb() - Get the Link Error Status Block (LESB) for a given lport
* @lport: The local port to update speeds for
* @fc_lesb: Pointer to the LESB to be filled up
* @netdev: Pointer to the netdev that is associated with the lport
*
* Note, the Link Error Status Block (LESB) for FCoE is defined in FC-BB-6
* Clause 7.11 in v1.04.
*/
void __fcoe_get_lesb(struct fc_lport *lport,
struct fc_els_lesb *fc_lesb,
struct net_device *netdev)
{
unsigned int cpu;
u32 lfc, vlfc, mdac;
struct fc_stats *stats;
struct fcoe_fc_els_lesb *lesb;
struct rtnl_link_stats64 temp;
lfc = 0;
vlfc = 0;
mdac = 0;
lesb = (struct fcoe_fc_els_lesb *)fc_lesb;
memset(lesb, 0, sizeof(*lesb));
for_each_possible_cpu(cpu) {
stats = per_cpu_ptr(lport->stats, cpu);
lfc += stats->LinkFailureCount;
vlfc += stats->VLinkFailureCount;
mdac += stats->MissDiscAdvCount;
}
lesb->lesb_link_fail = htonl(lfc);
lesb->lesb_vlink_fail = htonl(vlfc);
lesb->lesb_miss_fka = htonl(mdac);
lesb->lesb_fcs_error =
htonl(dev_get_stats(netdev, &temp)->rx_crc_errors);
}
EXPORT_SYMBOL_GPL(__fcoe_get_lesb);
/**
* fcoe_get_lesb() - Fill the FCoE Link Error Status Block
* @lport: the local port
* @fc_lesb: the link error status block
*/
void fcoe_get_lesb(struct fc_lport *lport,
struct fc_els_lesb *fc_lesb)
{
struct net_device *netdev = fcoe_get_netdev(lport);
__fcoe_get_lesb(lport, fc_lesb, netdev);
}
EXPORT_SYMBOL_GPL(fcoe_get_lesb);
/**
* fcoe_ctlr_get_lesb() - Get the Link Error Status Block (LESB) for a given
* fcoe controller device
* @ctlr_dev: The given fcoe controller device
*
*/
void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev)
{
struct fcoe_ctlr *fip = fcoe_ctlr_device_priv(ctlr_dev);
struct net_device *netdev = fcoe_get_netdev(fip->lp);
struct fc_els_lesb *fc_lesb;
fc_lesb = (struct fc_els_lesb *)(&ctlr_dev->lesb);
__fcoe_get_lesb(fip->lp, fc_lesb, netdev);
}
EXPORT_SYMBOL_GPL(fcoe_ctlr_get_lesb);
void fcoe_wwn_to_str(u64 wwn, char *buf, int len)
{
u8 wwpn[8];
u64_to_wwn(wwn, wwpn);
snprintf(buf, len, "%02x%02x%02x%02x%02x%02x%02x%02x",
wwpn[0], wwpn[1], wwpn[2], wwpn[3],
wwpn[4], wwpn[5], wwpn[6], wwpn[7]);
}
EXPORT_SYMBOL_GPL(fcoe_wwn_to_str);
/**
* fcoe_validate_vport_create() - Validate a vport before creating it
* @vport: NPIV port to be created
*
* This routine is meant to add validation for a vport before creating it
* via fcoe_vport_create().
* Current validations are:
* - WWPN supplied is unique for given lport
*/
int fcoe_validate_vport_create(struct fc_vport *vport)
{
struct Scsi_Host *shost = vport_to_shost(vport);
struct fc_lport *n_port = shost_priv(shost);
struct fc_lport *vn_port;
int rc = 0;
char buf[32];
mutex_lock(&n_port->lp_mutex);
fcoe_wwn_to_str(vport->port_name, buf, sizeof(buf));
/* Check if the wwpn is not same as that of the lport */
if (!memcmp(&n_port->wwpn, &vport->port_name, sizeof(u64))) {
LIBFCOE_TRANSPORT_DBG("vport WWPN 0x%s is same as that of the "
"base port WWPN\n", buf);
rc = -EINVAL;
goto out;
}
/* Check if there is any existing vport with same wwpn */
list_for_each_entry(vn_port, &n_port->vports, list) {
if (!memcmp(&vn_port->wwpn, &vport->port_name, sizeof(u64))) {
LIBFCOE_TRANSPORT_DBG("vport with given WWPN 0x%s "
"already exists\n", buf);
rc = -EINVAL;
break;
}
}
out:
mutex_unlock(&n_port->lp_mutex);
return rc;
}
EXPORT_SYMBOL_GPL(fcoe_validate_vport_create);
/**
* fcoe_get_wwn() - Get the world wide name from LLD if it supports it
* @netdev: the associated net device
* @wwn: the output WWN
* @type: the type of WWN (WWPN or WWNN)
*
* Returns: 0 for success
*/
int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
{
const struct net_device_ops *ops = netdev->netdev_ops;
if (ops->ndo_fcoe_get_wwn)
return ops->ndo_fcoe_get_wwn(netdev, wwn, type);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(fcoe_get_wwn);
/**
* fcoe_fc_crc() - Calculates the CRC for a given frame
* @fp: The frame to be checksumed
*
* This uses crc32() routine to calculate the CRC for a frame
*
* Return: The 32 bit CRC value
*/
u32 fcoe_fc_crc(struct fc_frame *fp)
{
struct sk_buff *skb = fp_skb(fp);
struct skb_frag_struct *frag;
unsigned char *data;
unsigned long off, len, clen;
u32 crc;
unsigned i;
crc = crc32(~0, skb->data, skb_headlen(skb));
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
frag = &skb_shinfo(skb)->frags[i];
off = frag->page_offset;
len = skb_frag_size(frag);
while (len > 0) {
clen = min(len, PAGE_SIZE - (off & ~PAGE_MASK));
data = kmap_atomic(
skb_frag_page(frag) + (off >> PAGE_SHIFT));
crc = crc32(crc, data + (off & ~PAGE_MASK), clen);
kunmap_atomic(data);
off += clen;
len -= clen;
}
}
return crc;
}
EXPORT_SYMBOL_GPL(fcoe_fc_crc);
/**
* fcoe_start_io() - Start FCoE I/O
* @skb: The packet to be transmitted
*
* This routine is called from the net device to start transmitting
* FCoE packets.
*
* Returns: 0 for success
*/
int fcoe_start_io(struct sk_buff *skb)
{
struct sk_buff *nskb;
int rc;
nskb = skb_clone(skb, GFP_ATOMIC);
if (!nskb)
return -ENOMEM;
rc = dev_queue_xmit(nskb);
if (rc != 0)
return rc;
kfree_skb(skb);
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_start_io);
/**
* fcoe_clean_pending_queue() - Dequeue a skb and free it
* @lport: The local port to dequeue a skb on
*/
void fcoe_clean_pending_queue(struct fc_lport *lport)
{
struct fcoe_port *port = lport_priv(lport);
struct sk_buff *skb;
spin_lock_bh(&port->fcoe_pending_queue.lock);
while ((skb = __skb_dequeue(&port->fcoe_pending_queue)) != NULL) {
spin_unlock_bh(&port->fcoe_pending_queue.lock);
kfree_skb(skb);
spin_lock_bh(&port->fcoe_pending_queue.lock);
}
spin_unlock_bh(&port->fcoe_pending_queue.lock);
}
EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
/**
* fcoe_check_wait_queue() - Attempt to clear the transmit backlog
* @lport: The local port whose backlog is to be cleared
*
* This empties the wait_queue, dequeues the head of the wait_queue queue
* and calls fcoe_start_io() for each packet. If all skb have been
* transmitted it returns the qlen. If an error occurs it restores
* wait_queue (to try again later) and returns -1.
*
* The wait_queue is used when the skb transmit fails. The failed skb
* will go in the wait_queue which will be emptied by the timer function or
* by the next skb transmit.
*/
void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb)
{
struct fcoe_port *port = lport_priv(lport);
int rc;
spin_lock_bh(&port->fcoe_pending_queue.lock);
if (skb)
__skb_queue_tail(&port->fcoe_pending_queue, skb);
if (port->fcoe_pending_queue_active)
goto out;
port->fcoe_pending_queue_active = 1;
while (port->fcoe_pending_queue.qlen) {
/* keep qlen > 0 until fcoe_start_io succeeds */
port->fcoe_pending_queue.qlen++;
skb = __skb_dequeue(&port->fcoe_pending_queue);
spin_unlock_bh(&port->fcoe_pending_queue.lock);
rc = fcoe_start_io(skb);
spin_lock_bh(&port->fcoe_pending_queue.lock);
if (rc) {
__skb_queue_head(&port->fcoe_pending_queue, skb);
/* undo temporary increment above */
port->fcoe_pending_queue.qlen--;
break;
}
/* undo temporary increment above */
port->fcoe_pending_queue.qlen--;
}
if (port->fcoe_pending_queue.qlen < port->min_queue_depth)
lport->qfull = 0;
if (port->fcoe_pending_queue.qlen && !timer_pending(&port->timer))
mod_timer(&port->timer, jiffies + 2);
port->fcoe_pending_queue_active = 0;
out:
if (port->fcoe_pending_queue.qlen > port->max_queue_depth)
lport->qfull = 1;
spin_unlock_bh(&port->fcoe_pending_queue.lock);
}
EXPORT_SYMBOL_GPL(fcoe_check_wait_queue);
/**
* fcoe_queue_timer() - The fcoe queue timer
* @lport: The local port
*
* Calls fcoe_check_wait_queue on timeout
*/
void fcoe_queue_timer(struct timer_list *t)
{
struct fcoe_port *port = from_timer(port, t, timer);
fcoe_check_wait_queue(port->lport, NULL);
}
EXPORT_SYMBOL_GPL(fcoe_queue_timer);
/**
* fcoe_get_paged_crc_eof() - Allocate a page to be used for the trailer CRC
* @skb: The packet to be transmitted
* @tlen: The total length of the trailer
* @fps: The fcoe context
*
* This routine allocates a page for frame trailers. The page is re-used if
* there is enough room left on it for the current trailer. If there isn't
* enough buffer left a new page is allocated for the trailer. Reference to
* the page from this function as well as the skbs using the page fragments
* ensure that the page is freed at the appropriate time.
*
* Returns: 0 for success
*/
int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen,
struct fcoe_percpu_s *fps)
{
struct page *page;
page = fps->crc_eof_page;
if (!page) {
page = alloc_page(GFP_ATOMIC);
if (!page)
return -ENOMEM;
fps->crc_eof_page = page;
fps->crc_eof_offset = 0;
}
get_page(page);
skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, page,
fps->crc_eof_offset, tlen);
skb->len += tlen;
skb->data_len += tlen;
skb->truesize += tlen;
fps->crc_eof_offset += sizeof(struct fcoe_crc_eof);
if (fps->crc_eof_offset >= PAGE_SIZE) {
fps->crc_eof_page = NULL;
fps->crc_eof_offset = 0;
put_page(page);
}
return 0;
}
EXPORT_SYMBOL_GPL(fcoe_get_paged_crc_eof);
/**
* fcoe_transport_lookup - find an fcoe transport that matches a netdev
* @netdev: The netdev to look for from all attached transports
*
* Returns : ptr to the fcoe transport that supports this netdev or NULL
* if not found.
*
* The ft_mutex should be held when this is called
*/
static struct fcoe_transport *fcoe_transport_lookup(struct net_device *netdev)
{
struct fcoe_transport *ft = NULL;
list_for_each_entry(ft, &fcoe_transports, list)
if (ft->match && ft->match(netdev))
return ft;
return NULL;
}
/**
* fcoe_transport_attach - Attaches an FCoE transport
* @ft: The fcoe transport to be attached
*
* Returns : 0 for success
*/
int fcoe_transport_attach(struct fcoe_transport *ft)
{
int rc = 0;
mutex_lock(&ft_mutex);
if (ft->attached) {
LIBFCOE_TRANSPORT_DBG("transport %s already attached\n",
ft->name);
rc = -EEXIST;
goto out_attach;
}
/* Add default transport to the tail */
if (strcmp(ft->name, FCOE_TRANSPORT_DEFAULT))
list_add(&ft->list, &fcoe_transports);
else
list_add_tail(&ft->list, &fcoe_transports);
ft->attached = true;
LIBFCOE_TRANSPORT_DBG("attaching transport %s\n", ft->name);
out_attach:
mutex_unlock(&ft_mutex);
return rc;
}
EXPORT_SYMBOL(fcoe_transport_attach);
/**
* fcoe_transport_detach - Detaches an FCoE transport
* @ft: The fcoe transport to be attached
*
* Returns : 0 for success
*/
int fcoe_transport_detach(struct fcoe_transport *ft)
{
int rc = 0;
struct fcoe_netdev_mapping *nm = NULL, *tmp;
mutex_lock(&ft_mutex);
if (!ft->attached) {
LIBFCOE_TRANSPORT_DBG("transport %s already detached\n",
ft->name);
rc = -ENODEV;
goto out_attach;
}
/* remove netdev mapping for this transport as it is going away */
mutex_lock(&fn_mutex);
list_for_each_entry_safe(nm, tmp, &fcoe_netdevs, list) {
if (nm->ft == ft) {
LIBFCOE_TRANSPORT_DBG("transport %s going away, "
"remove its netdev mapping for %s\n",
ft->name, nm->netdev->name);
list_del(&nm->list);
kfree(nm);
}
}
mutex_unlock(&fn_mutex);
list_del(&ft->list);
ft->attached = false;
LIBFCOE_TRANSPORT_DBG("detaching transport %s\n", ft->name);
out_attach:
mutex_unlock(&ft_mutex);
return rc;
}
EXPORT_SYMBOL(fcoe_transport_detach);
static int fcoe_transport_show(char *buffer, const struct kernel_param *kp)
{
int i, j;
struct fcoe_transport *ft = NULL;
i = j = sprintf(buffer, "Attached FCoE transports:");
mutex_lock(&ft_mutex);
list_for_each_entry(ft, &fcoe_transports, list) {
if (i >= PAGE_SIZE - IFNAMSIZ)
break;
i += snprintf(&buffer[i], IFNAMSIZ, "%s ", ft->name);
}
mutex_unlock(&ft_mutex);
if (i == j)
i += snprintf(&buffer[i], IFNAMSIZ, "none");
return i;
}
static int __init fcoe_transport_init(void)
{
register_netdevice_notifier(&libfcoe_notifier);
return 0;
}
static int fcoe_transport_exit(void)
{
struct fcoe_transport *ft;
unregister_netdevice_notifier(&libfcoe_notifier);
mutex_lock(&ft_mutex);
list_for_each_entry(ft, &fcoe_transports, list)
printk(KERN_ERR "FCoE transport %s is still attached!\n",
ft->name);
mutex_unlock(&ft_mutex);
return 0;
}
static int fcoe_add_netdev_mapping(struct net_device *netdev,
struct fcoe_transport *ft)
{
struct fcoe_netdev_mapping *nm;
nm = kmalloc(sizeof(*nm), GFP_KERNEL);
if (!nm) {
printk(KERN_ERR "Unable to allocate netdev_mapping");
return -ENOMEM;
}
nm->netdev = netdev;
nm->ft = ft;
mutex_lock(&fn_mutex);
list_add(&nm->list, &fcoe_netdevs);
mutex_unlock(&fn_mutex);
return 0;
}
static void fcoe_del_netdev_mapping(struct net_device *netdev)
{
struct fcoe_netdev_mapping *nm = NULL, *tmp;
mutex_lock(&fn_mutex);
list_for_each_entry_safe(nm, tmp, &fcoe_netdevs, list) {
if (nm->netdev == netdev) {
list_del(&nm->list);
kfree(nm);
mutex_unlock(&fn_mutex);
return;
}
}
mutex_unlock(&fn_mutex);
}
/**
* fcoe_netdev_map_lookup - find the fcoe transport that matches the netdev on which
* it was created
*
* Returns : ptr to the fcoe transport that supports this netdev or NULL
* if not found.
*
* The ft_mutex should be held when this is called
*/
static struct fcoe_transport *fcoe_netdev_map_lookup(struct net_device *netdev)
{
struct fcoe_transport *ft = NULL;
struct fcoe_netdev_mapping *nm;
mutex_lock(&fn_mutex);
list_for_each_entry(nm, &fcoe_netdevs, list) {
if (netdev == nm->netdev) {
ft = nm->ft;
mutex_unlock(&fn_mutex);
return ft;
}
}
mutex_unlock(&fn_mutex);
return NULL;
}
/**
* fcoe_if_to_netdev() - Parse a name buffer to get a net device
* @buffer: The name of the net device
*
* Returns: NULL or a ptr to net_device
*/
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
char *cp;
char ifname[IFNAMSIZ + 2];
if (buffer) {
strlcpy(ifname, buffer, IFNAMSIZ);
cp = ifname + strlen(ifname);
while (--cp >= ifname && *cp == '\n')
*cp = '\0';
return dev_get_by_name(&init_net, ifname);
}
return NULL;
}
/**
* libfcoe_device_notification() - Handler for net device events
* @notifier: The context of the notification
* @event: The type of event
* @ptr: The net device that the event was on
*
* This function is called by the Ethernet driver in case of link change event.
*
* Returns: 0 for success
*/
static int libfcoe_device_notification(struct notifier_block *notifier,
ulong event, void *ptr)
{
struct net_device *netdev = netdev_notifier_info_to_dev(ptr);
switch (event) {
case NETDEV_UNREGISTER:
LIBFCOE_TRANSPORT_DBG("NETDEV_UNREGISTER %s\n",
netdev->name);
fcoe_del_netdev_mapping(netdev);
break;
}
return NOTIFY_OK;
}
libfcoe, fcoe, bnx2fc: Add new fcoe control interface This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-11-26 23:53:30 -07:00
ssize_t fcoe_ctlr_create_store(struct bus_type *bus,
const char *buf, size_t count)
{
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
int rc = 0;
int err;
mutex_lock(&ft_mutex);
netdev = fcoe_if_to_netdev(buf);
if (!netdev) {
LIBFCOE_TRANSPORT_DBG("Invalid device %s.\n", buf);
rc = -ENODEV;
goto out_nodev;
}
ft = fcoe_netdev_map_lookup(netdev);
if (ft) {
LIBFCOE_TRANSPORT_DBG("transport %s already has existing "
"FCoE instance on %s.\n",
ft->name, netdev->name);
rc = -EEXIST;
goto out_putdev;
}
ft = fcoe_transport_lookup(netdev);
if (!ft) {
LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
netdev->name);
rc = -ENODEV;
goto out_putdev;
}
/* pass to transport create */
err = ft->alloc ? ft->alloc(netdev) : -ENODEV;
if (err) {
fcoe_del_netdev_mapping(netdev);
rc = -ENOMEM;
goto out_putdev;
}
err = fcoe_add_netdev_mapping(netdev, ft);
if (err) {
LIBFCOE_TRANSPORT_DBG("failed to add new netdev mapping "
"for FCoE transport %s for %s.\n",
ft->name, netdev->name);
rc = -ENODEV;
goto out_putdev;
}
LIBFCOE_TRANSPORT_DBG("transport %s succeeded to create fcoe on %s.\n",
ft->name, netdev->name);
libfcoe, fcoe, bnx2fc: Add new fcoe control interface This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-11-26 23:53:30 -07:00
out_putdev:
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
if (rc)
return rc;
return count;
}
ssize_t fcoe_ctlr_destroy_store(struct bus_type *bus,
const char *buf, size_t count)
{
int rc = -ENODEV;
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
mutex_lock(&ft_mutex);
netdev = fcoe_if_to_netdev(buf);
if (!netdev) {
LIBFCOE_TRANSPORT_DBG("invalid device %s.\n", buf);
goto out_nodev;
}
ft = fcoe_netdev_map_lookup(netdev);
if (!ft) {
LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
netdev->name);
goto out_putdev;
}
/* pass to transport destroy */
rc = ft->destroy(netdev);
if (rc)
goto out_putdev;
fcoe_del_netdev_mapping(netdev);
LIBFCOE_TRANSPORT_DBG("transport %s %s to destroy fcoe on %s.\n",
ft->name, (rc) ? "failed" : "succeeded",
netdev->name);
rc = count; /* required for successful return */
out_putdev:
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
return rc;
}
/**
* fcoe_transport_create() - Create a fcoe interface
* @buffer: The name of the Ethernet interface to create on
* @kp: The associated kernel param
*
* Called from sysfs. This holds the ft_mutex while calling the
* registered fcoe transport's create function.
*
* Returns: 0 for success
*/
static int fcoe_transport_create(const char *buffer,
const struct kernel_param *kp)
{
int rc = -ENODEV;
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
scsi: fcoe: make use of fip_mode enum complete commit 1917d42d14b7 ("fcoe: use enum for fip_mode") introduces a separate enum for the fip_mode that shall be used during initialisation handling until it is passed to fcoe_ctrl_link_up to set the initial fip_state. That change was incomplete and gcc quietly converted in various places between the fip_mode and the fip_state enum values with implicit enum conversions, which fortunately cannot cause any issues in the actual code's execution. clang however warns about these implicit enum conversions in the scsi drivers. This commit consolidates the use of the two enums, guided by clang's enum-conversion warnings. This commit now completes the use of the fip_mode: It expects and uses fip_mode in {bnx2fc,fcoe}_interface_create and fcoe_ctlr_init, and it calls fcoe_ctrl_set_set() with the correct values in fcoe_ctlr_link_up(). It also breaks the association between FIP_MODE_AUTO and FIP_ST_AUTO to indicate these two enums are distinct. Link: https://github.com/ClangBuiltLinux/linux/issues/151 Fixes: 1917d42d14b7 ("fcoe: use enum for fip_mode") Reported-by: Dmitry Golovin <dima@golovin.in> Original-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> CC: Lukas Bulwahn <lukas.bulwahn@gmail.com> CC: Nick Desaulniers <ndesaulniers@google.com> CC: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Suggested-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-02-15 05:19:20 -07:00
enum fip_mode fip_mode = (enum fip_mode)kp->arg;
mutex_lock(&ft_mutex);
netdev = fcoe_if_to_netdev(buffer);
if (!netdev) {
LIBFCOE_TRANSPORT_DBG("Invalid device %s.\n", buffer);
goto out_nodev;
}
ft = fcoe_netdev_map_lookup(netdev);
if (ft) {
LIBFCOE_TRANSPORT_DBG("transport %s already has existing "
"FCoE instance on %s.\n",
ft->name, netdev->name);
rc = -EEXIST;
goto out_putdev;
}
ft = fcoe_transport_lookup(netdev);
if (!ft) {
LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
netdev->name);
goto out_putdev;
}
rc = fcoe_add_netdev_mapping(netdev, ft);
if (rc) {
LIBFCOE_TRANSPORT_DBG("failed to add new netdev mapping "
"for FCoE transport %s for %s.\n",
ft->name, netdev->name);
goto out_putdev;
}
/* pass to transport create */
rc = ft->create ? ft->create(netdev, fip_mode) : -ENODEV;
if (rc)
fcoe_del_netdev_mapping(netdev);
LIBFCOE_TRANSPORT_DBG("transport %s %s to create fcoe on %s.\n",
ft->name, (rc) ? "failed" : "succeeded",
netdev->name);
out_putdev:
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
return rc;
}
/**
* fcoe_transport_destroy() - Destroy a FCoE interface
* @buffer: The name of the Ethernet interface to be destroyed
* @kp: The associated kernel parameter
*
* Called from sysfs. This holds the ft_mutex while calling the
* registered fcoe transport's destroy function.
*
* Returns: 0 for success
*/
static int fcoe_transport_destroy(const char *buffer,
const struct kernel_param *kp)
{
int rc = -ENODEV;
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
mutex_lock(&ft_mutex);
netdev = fcoe_if_to_netdev(buffer);
if (!netdev) {
LIBFCOE_TRANSPORT_DBG("invalid device %s.\n", buffer);
goto out_nodev;
}
ft = fcoe_netdev_map_lookup(netdev);
if (!ft) {
LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
netdev->name);
goto out_putdev;
}
/* pass to transport destroy */
rc = ft->destroy ? ft->destroy(netdev) : -ENODEV;
fcoe_del_netdev_mapping(netdev);
LIBFCOE_TRANSPORT_DBG("transport %s %s to destroy fcoe on %s.\n",
ft->name, (rc) ? "failed" : "succeeded",
netdev->name);
out_putdev:
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
return rc;
}
/**
* fcoe_transport_disable() - Disables a FCoE interface
* @buffer: The name of the Ethernet interface to be disabled
* @kp: The associated kernel parameter
*
* Called from sysfs.
*
* Returns: 0 for success
*/
static int fcoe_transport_disable(const char *buffer,
const struct kernel_param *kp)
{
int rc = -ENODEV;
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
mutex_lock(&ft_mutex);
netdev = fcoe_if_to_netdev(buffer);
if (!netdev)
goto out_nodev;
ft = fcoe_netdev_map_lookup(netdev);
if (!ft)
goto out_putdev;
rc = ft->disable ? ft->disable(netdev) : -ENODEV;
out_putdev:
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
return rc;
}
/**
* fcoe_transport_enable() - Enables a FCoE interface
* @buffer: The name of the Ethernet interface to be enabled
* @kp: The associated kernel parameter
*
* Called from sysfs.
*
* Returns: 0 for success
*/
static int fcoe_transport_enable(const char *buffer,
const struct kernel_param *kp)
{
int rc = -ENODEV;
struct net_device *netdev = NULL;
struct fcoe_transport *ft = NULL;
mutex_lock(&ft_mutex);
netdev = fcoe_if_to_netdev(buffer);
if (!netdev)
goto out_nodev;
ft = fcoe_netdev_map_lookup(netdev);
if (!ft)
goto out_putdev;
rc = ft->enable ? ft->enable(netdev) : -ENODEV;
out_putdev:
dev_put(netdev);
out_nodev:
mutex_unlock(&ft_mutex);
return rc;
}
/**
* libfcoe_init() - Initialization routine for libfcoe.ko
*/
static int __init libfcoe_init(void)
{
[SCSI] libfcoe: Add fcoe_sysfs This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22 20:06:21 -06:00
int rc = 0;
[SCSI] libfcoe: Add fcoe_sysfs This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22 20:06:21 -06:00
rc = fcoe_transport_init();
if (rc)
return rc;
rc = fcoe_sysfs_setup();
if (rc)
fcoe_transport_exit();
return rc;
}
module_init(libfcoe_init);
/**
* libfcoe_exit() - Tear down libfcoe.ko
*/
static void __exit libfcoe_exit(void)
{
[SCSI] libfcoe: Add fcoe_sysfs This patch adds a 'fcoe bus' infrastructure to the kernel that is driven by changes to libfcoe which allow LLDs to present FIP (FCoE Initialization Protocol) discovered entities and their attributes to user space via sysfs. This patch adds the following APIs- fcoe_ctlr_device_add fcoe_ctlr_device_delete fcoe_fcf_device_add fcoe_fcf_device_delete They allow the LLD to expose the FCoE ENode Controller and any discovered FCFs (Fibre Channel Forwarders, e.g. FCoE switches) to the user. Each of these new devices has their own bus_type so that they are grouped together for easy lookup from a user space application. Each new class has an attribute_group to expose attributes for any created instances. The attributes are- fcoe_ctlr_device * fcf_dev_loss_tmo * lesb_link_fail * lesb_vlink_fail * lesb_miss_fka * lesb_symb_err * lesb_err_block * lesb_fcs_error fcoe_fcf_device * fabric_name * switch_name * priority * selected * fc_map * vfid * mac * fka_peroid * fabric_state * dev_loss_tmo A device loss infrastructre similar to the FC Transport's is also added by this patch. It is nice to have so that a link flapping adapter doesn't continually advance the count used to identify the discovered FCF. FCFs will exist in a "Disconnected" state until either the timer expires or the FCF is rediscovered and becomes "Connected." This patch generates a few checkpatch.pl WARNINGS that I'm not sure what to do about. They're macros modeled around the FC Transport attribute building macros, which have the same 'feature' where the caller can ommit a cast in the argument list and no cast occurs in the code. I'm not sure how to keep the code condensed while keeping the macros. Any advice would be appreciated. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-05-22 20:06:21 -06:00
fcoe_sysfs_teardown();
fcoe_transport_exit();
}
module_exit(libfcoe_exit);