1
0
Fork 0
alistair23-linux/arch/arm64/mm/init.c

389 lines
9.8 KiB
C
Raw Normal View History

/*
* Based on arch/arm/mm/init.c
*
* Copyright (C) 1995-2005 Russell King
* Copyright (C) 2012 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/errno.h>
#include <linux/swap.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/mman.h>
#include <linux/nodemask.h>
#include <linux/initrd.h>
#include <linux/gfp.h>
#include <linux/memblock.h>
#include <linux/sort.h>
#include <linux/of_fdt.h>
#include <linux/dma-mapping.h>
#include <linux/dma-contiguous.h>
#include <linux/efi.h>
#include <linux/swiotlb.h>
#include <asm/fixmap.h>
#include <asm/kasan.h>
arm64: Fix overlapping VA allocations PCI IO space was intended to be 16MiB, at 32MiB below MODULES_VADDR, but commit d1e6dc91b532d3d3 ("arm64: Add architectural support for PCI") extended this to cover the full 32MiB. The final 8KiB of this 32MiB is also allocated for the fixmap, allowing for potential clashes between the two. This change was masked by assumptions in mem_init and the page table dumping code, which assumed the I/O space to be 16MiB long through seaparte hard-coded definitions. This patch changes the definition of the PCI I/O space allocation to live in asm/memory.h, along with the other VA space allocations. As the fixmap allocation depends on the number of fixmap entries, this is moved below the PCI I/O space allocation. Both the fixmap and PCI I/O space are guarded with 2MB of padding. Sites assuming the I/O space was 16MiB are moved over use new PCI_IO_{START,END} definitions, which will keep in sync with the size of the IO space (now restored to 16MiB). As a useful side effect, the use of the new PCI_IO_{START,END} definitions prevents a build issue in the dumping code due to a (now redundant) missing include of io.h for PCI_IOBASE. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: reorder FIXADDR and PCI_IO address_markers_idx enum] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-01-22 11:20:35 -07:00
#include <asm/memory.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
#include <asm/alternative.h>
#include "mm.h"
phys_addr_t memstart_addr __read_mostly = 0;
phys_addr_t arm64_dma_phys_limit __read_mostly;
#ifdef CONFIG_BLK_DEV_INITRD
static int __init early_initrd(char *p)
{
unsigned long start, size;
char *endp;
start = memparse(p, &endp);
if (*endp == ',') {
size = memparse(endp + 1, NULL);
initrd_start = start;
initrd_end = start + size;
}
return 0;
}
early_param("initrd", early_initrd);
#endif
/*
* Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
* currently assumes that for memory starting above 4G, 32-bit devices will
* use a DMA offset.
*/
static phys_addr_t __init max_zone_dma_phys(void)
{
phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
return min(offset + (1ULL << 32), memblock_end_of_DRAM());
}
static void __init zone_sizes_init(unsigned long min, unsigned long max)
{
struct memblock_region *reg;
unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
unsigned long max_dma = min;
memset(zone_size, 0, sizeof(zone_size));
/* 4GB maximum for 32-bit only capable devices */
#ifdef CONFIG_ZONE_DMA
max_dma = PFN_DOWN(arm64_dma_phys_limit);
zone_size[ZONE_DMA] = max_dma - min;
#endif
zone_size[ZONE_NORMAL] = max - max_dma;
memcpy(zhole_size, zone_size, sizeof(zhole_size));
for_each_memblock(memory, reg) {
unsigned long start = memblock_region_memory_base_pfn(reg);
unsigned long end = memblock_region_memory_end_pfn(reg);
if (start >= max)
continue;
#ifdef CONFIG_ZONE_DMA
if (start < max_dma) {
unsigned long dma_end = min(end, max_dma);
zhole_size[ZONE_DMA] -= dma_end - start;
}
#endif
if (end > max_dma) {
unsigned long normal_end = min(end, max);
unsigned long normal_start = max(start, max_dma);
zhole_size[ZONE_NORMAL] -= normal_end - normal_start;
}
}
free_area_init_node(0, zone_size, min, zhole_size);
}
#ifdef CONFIG_HAVE_ARCH_PFN_VALID
int pfn_valid(unsigned long pfn)
{
return memblock_is_map_memory(pfn << PAGE_SHIFT);
}
EXPORT_SYMBOL(pfn_valid);
#endif
#ifndef CONFIG_SPARSEMEM
static void __init arm64_memory_present(void)
{
}
#else
static void __init arm64_memory_present(void)
{
struct memblock_region *reg;
for_each_memblock(memory, reg)
memory_present(0, memblock_region_memory_base_pfn(reg),
memblock_region_memory_end_pfn(reg));
}
#endif
static phys_addr_t memory_limit = (phys_addr_t)ULLONG_MAX;
/*
* Limit the memory size that was specified via FDT.
*/
static int __init early_mem(char *p)
{
if (!p)
return 1;
memory_limit = memparse(p, &p) & PAGE_MASK;
pr_notice("Memory limited to %lldMB\n", memory_limit >> 20);
return 0;
}
early_param("mem", early_mem);
void __init arm64_memblock_init(void)
{
memblock_enforce_memory_limit(memory_limit);
/*
* Register the kernel text, kernel data, initrd, and initial
* pagetables with memblock.
*/
memblock_reserve(__pa(_text), _end - _text);
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start) {
memblock_reserve(initrd_start, initrd_end - initrd_start);
/* the generic initrd code expects virtual addresses */
initrd_start = __phys_to_virt(initrd_start);
initrd_end = __phys_to_virt(initrd_end);
}
#endif
early_init_fdt_scan_reserved_mem();
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA))
arm64_dma_phys_limit = max_zone_dma_phys();
else
arm64_dma_phys_limit = PHYS_MASK + 1;
dma_contiguous_reserve(arm64_dma_phys_limit);
memblock_allow_resize();
memblock_dump_all();
}
void __init bootmem_init(void)
{
unsigned long min, max;
min = PFN_UP(memblock_start_of_DRAM());
max = PFN_DOWN(memblock_end_of_DRAM());
early_memtest(min << PAGE_SHIFT, max << PAGE_SHIFT);
/*
* Sparsemem tries to allocate bootmem in memory_present(), so must be
* done after the fixed reservations.
*/
arm64_memory_present();
sparse_init();
zone_sizes_init(min, max);
high_memory = __va((max << PAGE_SHIFT) - 1) + 1;
max_pfn = max_low_pfn = max;
}
#ifndef CONFIG_SPARSEMEM_VMEMMAP
static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn)
{
struct page *start_pg, *end_pg;
unsigned long pg, pgend;
/*
* Convert start_pfn/end_pfn to a struct page pointer.
*/
start_pg = pfn_to_page(start_pfn - 1) + 1;
end_pg = pfn_to_page(end_pfn - 1) + 1;
/*
* Convert to physical addresses, and round start upwards and end
* downwards.
*/
pg = (unsigned long)PAGE_ALIGN(__pa(start_pg));
pgend = (unsigned long)__pa(end_pg) & PAGE_MASK;
/*
* If there are free pages between these, free the section of the
* memmap array.
*/
if (pg < pgend)
free_bootmem(pg, pgend - pg);
}
/*
* The mem_map array can get very big. Free the unused area of the memory map.
*/
static void __init free_unused_memmap(void)
{
unsigned long start, prev_end = 0;
struct memblock_region *reg;
for_each_memblock(memory, reg) {
start = __phys_to_pfn(reg->base);
#ifdef CONFIG_SPARSEMEM
/*
* Take care not to free memmap entries that don't exist due
* to SPARSEMEM sections which aren't present.
*/
start = min(start, ALIGN(prev_end, PAGES_PER_SECTION));
#endif
/*
* If we had a previous bank, and there is a space between the
* current bank and the previous, free it.
*/
if (prev_end && prev_end < start)
free_memmap(prev_end, start);
/*
* Align up here since the VM subsystem insists that the
* memmap entries are valid from the bank end aligned to
* MAX_ORDER_NR_PAGES.
*/
prev_end = ALIGN(__phys_to_pfn(reg->base + reg->size),
MAX_ORDER_NR_PAGES);
}
#ifdef CONFIG_SPARSEMEM
if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION))
free_memmap(prev_end, ALIGN(prev_end, PAGES_PER_SECTION));
#endif
}
#endif /* !CONFIG_SPARSEMEM_VMEMMAP */
/*
* mem_init() marks the free areas in the mem_map and tells us how much memory
* is free. This is done after various parts of the system have claimed their
* memory after the kernel image.
*/
void __init mem_init(void)
{
swiotlb_init(1);
set_max_mapnr(pfn_to_page(max_pfn) - mem_map);
#ifndef CONFIG_SPARSEMEM_VMEMMAP
free_unused_memmap();
#endif
/* this will put all unused low memory onto the freelists */
mm: concentrate modification of totalram_pages into the mm core Concentrate code to modify totalram_pages into the mm core, so the arch memory initialized code doesn't need to take care of it. With these changes applied, only following functions from mm core modify global variable totalram_pages: free_bootmem_late(), free_all_bootmem(), free_all_bootmem_node(), adjust_managed_page_count(). With this patch applied, it will be much more easier for us to keep totalram_pages and zone->managed_pages in consistence. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: David Howells <dhowells@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michel Lespinasse <walken@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:03:24 -06:00
free_all_bootmem();
mem_init_print_info(NULL);
#define MLK(b, t) b, t, ((t) - (b)) >> 10
#define MLM(b, t) b, t, ((t) - (b)) >> 20
#define MLG(b, t) b, t, ((t) - (b)) >> 30
#define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K)
pr_notice("Virtual kernel memory layout:\n"
#ifdef CONFIG_KASAN
" kasan : 0x%16lx - 0x%16lx (%6ld GB)\n"
#endif
" modules : 0x%16lx - 0x%16lx (%6ld MB)\n"
" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n"
" .init : 0x%p" " - 0x%p" " (%6ld KB)\n"
" .text : 0x%p" " - 0x%p" " (%6ld KB)\n"
" .data : 0x%p" " - 0x%p" " (%6ld KB)\n"
#ifdef CONFIG_SPARSEMEM_VMEMMAP
" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n"
" 0x%16lx - 0x%16lx (%6ld MB actual)\n"
#endif
" fixed : 0x%16lx - 0x%16lx (%6ld KB)\n"
arm64: Fix overlapping VA allocations PCI IO space was intended to be 16MiB, at 32MiB below MODULES_VADDR, but commit d1e6dc91b532d3d3 ("arm64: Add architectural support for PCI") extended this to cover the full 32MiB. The final 8KiB of this 32MiB is also allocated for the fixmap, allowing for potential clashes between the two. This change was masked by assumptions in mem_init and the page table dumping code, which assumed the I/O space to be 16MiB long through seaparte hard-coded definitions. This patch changes the definition of the PCI I/O space allocation to live in asm/memory.h, along with the other VA space allocations. As the fixmap allocation depends on the number of fixmap entries, this is moved below the PCI I/O space allocation. Both the fixmap and PCI I/O space are guarded with 2MB of padding. Sites assuming the I/O space was 16MiB are moved over use new PCI_IO_{START,END} definitions, which will keep in sync with the size of the IO space (now restored to 16MiB). As a useful side effect, the use of the new PCI_IO_{START,END} definitions prevents a build issue in the dumping code due to a (now redundant) missing include of io.h for PCI_IOBASE. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: reorder FIXADDR and PCI_IO address_markers_idx enum] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-01-22 11:20:35 -07:00
" PCI I/O : 0x%16lx - 0x%16lx (%6ld MB)\n"
" memory : 0x%16lx - 0x%16lx (%6ld MB)\n",
#ifdef CONFIG_KASAN
MLG(KASAN_SHADOW_START, KASAN_SHADOW_END),
#endif
MLM(MODULES_VADDR, MODULES_END),
MLG(VMALLOC_START, VMALLOC_END),
MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_text, _etext),
MLK_ROUNDUP(_sdata, _edata),
#ifdef CONFIG_SPARSEMEM_VMEMMAP
MLG((unsigned long)vmemmap,
(unsigned long)vmemmap + VMEMMAP_SIZE),
MLM((unsigned long)virt_to_page(PAGE_OFFSET),
(unsigned long)virt_to_page(high_memory)),
#endif
MLK(FIXADDR_START, FIXADDR_TOP),
arm64: Fix overlapping VA allocations PCI IO space was intended to be 16MiB, at 32MiB below MODULES_VADDR, but commit d1e6dc91b532d3d3 ("arm64: Add architectural support for PCI") extended this to cover the full 32MiB. The final 8KiB of this 32MiB is also allocated for the fixmap, allowing for potential clashes between the two. This change was masked by assumptions in mem_init and the page table dumping code, which assumed the I/O space to be 16MiB long through seaparte hard-coded definitions. This patch changes the definition of the PCI I/O space allocation to live in asm/memory.h, along with the other VA space allocations. As the fixmap allocation depends on the number of fixmap entries, this is moved below the PCI I/O space allocation. Both the fixmap and PCI I/O space are guarded with 2MB of padding. Sites assuming the I/O space was 16MiB are moved over use new PCI_IO_{START,END} definitions, which will keep in sync with the size of the IO space (now restored to 16MiB). As a useful side effect, the use of the new PCI_IO_{START,END} definitions prevents a build issue in the dumping code due to a (now redundant) missing include of io.h for PCI_IOBASE. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Will Deacon <will.deacon@arm.com> [catalin.marinas@arm.com: reorder FIXADDR and PCI_IO address_markers_idx enum] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-01-22 11:20:35 -07:00
MLM(PCI_IO_START, PCI_IO_END),
MLM(PAGE_OFFSET, (unsigned long)high_memory));
#undef MLK
#undef MLM
#undef MLK_ROUNDUP
/*
* Check boundaries twice: Some fundamental inconsistencies can be
* detected at build time already.
*/
#ifdef CONFIG_COMPAT
BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64);
#endif
BUILD_BUG_ON(TASK_SIZE_64 > MODULES_VADDR);
BUG_ON(TASK_SIZE_64 > MODULES_VADDR);
if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
extern int sysctl_overcommit_memory;
/*
* On a machine this small we won't get anywhere without
* overcommit, so turn it on by default.
*/
sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
}
}
void free_initmem(void)
{
free_initmem_default(0);
fixup_init();
}
#ifdef CONFIG_BLK_DEV_INITRD
static int keep_initrd __initdata;
void __init free_initrd_mem(unsigned long start, unsigned long end)
{
if (!keep_initrd)
free_reserved_area((void *)start, (void *)end, 0, "initrd");
}
static int __init keepinitrd_setup(char *__unused)
{
keep_initrd = 1;
return 1;
}
__setup("keepinitrd", keepinitrd_setup);
#endif