1
0
Fork 0
alistair23-linux/include/trace/events/rcu.h

462 lines
12 KiB
C
Raw Normal View History

#undef TRACE_SYSTEM
#define TRACE_SYSTEM rcu
#if !defined(_TRACE_RCU_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_RCU_H
#include <linux/tracepoint.h>
/*
* Tracepoint for start/end markers used for utilization calculations.
* By convention, the string is of the following forms:
*
* "Start <activity>" -- Mark the start of the specified activity,
* such as "context switch". Nesting is permitted.
* "End <activity>" -- Mark the end of the specified activity.
*
* An "@" character within "<activity>" is a comment character: Data
* reduction scripts will ignore the "@" and the remainder of the line.
*/
TRACE_EVENT(rcu_utilization,
TP_PROTO(char *s),
TP_ARGS(s),
TP_STRUCT__entry(
__field(char *, s)
),
TP_fast_assign(
__entry->s = s;
),
TP_printk("%s", __entry->s)
);
#ifdef CONFIG_RCU_TRACE
#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
/*
* Tracepoint for grace-period events: starting and ending a grace
* period ("start" and "end", respectively), a CPU noting the start
* of a new grace period or the end of an old grace period ("cpustart"
* and "cpuend", respectively), a CPU passing through a quiescent
* state ("cpuqs"), a CPU coming online or going offline ("cpuonl"
* and "cpuofl", respectively), and a CPU being kicked for being too
* long in dyntick-idle mode ("kick").
*/
TRACE_EVENT(rcu_grace_period,
TP_PROTO(char *rcuname, unsigned long gpnum, char *gpevent),
TP_ARGS(rcuname, gpnum, gpevent),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(unsigned long, gpnum)
__field(char *, gpevent)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->gpnum = gpnum;
__entry->gpevent = gpevent;
),
TP_printk("%s %lu %s",
__entry->rcuname, __entry->gpnum, __entry->gpevent)
);
/*
* Tracepoint for grace-period-initialization events. These are
* distinguished by the type of RCU, the new grace-period number, the
* rcu_node structure level, the starting and ending CPU covered by the
* rcu_node structure, and the mask of CPUs that will be waited for.
* All but the type of RCU are extracted from the rcu_node structure.
*/
TRACE_EVENT(rcu_grace_period_init,
TP_PROTO(char *rcuname, unsigned long gpnum, u8 level,
int grplo, int grphi, unsigned long qsmask),
TP_ARGS(rcuname, gpnum, level, grplo, grphi, qsmask),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(unsigned long, gpnum)
__field(u8, level)
__field(int, grplo)
__field(int, grphi)
__field(unsigned long, qsmask)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->gpnum = gpnum;
__entry->level = level;
__entry->grplo = grplo;
__entry->grphi = grphi;
__entry->qsmask = qsmask;
),
TP_printk("%s %lu %u %d %d %lx",
__entry->rcuname, __entry->gpnum, __entry->level,
__entry->grplo, __entry->grphi, __entry->qsmask)
);
/*
* Tracepoint for tasks blocking within preemptible-RCU read-side
* critical sections. Track the type of RCU (which one day might
* include SRCU), the grace-period number that the task is blocking
* (the current or the next), and the task's PID.
*/
TRACE_EVENT(rcu_preempt_task,
TP_PROTO(char *rcuname, int pid, unsigned long gpnum),
TP_ARGS(rcuname, pid, gpnum),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(unsigned long, gpnum)
__field(int, pid)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->gpnum = gpnum;
__entry->pid = pid;
),
TP_printk("%s %lu %d",
__entry->rcuname, __entry->gpnum, __entry->pid)
);
/*
* Tracepoint for tasks that blocked within a given preemptible-RCU
* read-side critical section exiting that critical section. Track the
* type of RCU (which one day might include SRCU) and the task's PID.
*/
TRACE_EVENT(rcu_unlock_preempted_task,
TP_PROTO(char *rcuname, unsigned long gpnum, int pid),
TP_ARGS(rcuname, gpnum, pid),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(unsigned long, gpnum)
__field(int, pid)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->gpnum = gpnum;
__entry->pid = pid;
),
TP_printk("%s %lu %d", __entry->rcuname, __entry->gpnum, __entry->pid)
);
/*
* Tracepoint for quiescent-state-reporting events. These are
* distinguished by the type of RCU, the grace-period number, the
* mask of quiescent lower-level entities, the rcu_node structure level,
* the starting and ending CPU covered by the rcu_node structure, and
* whether there are any blocked tasks blocking the current grace period.
* All but the type of RCU are extracted from the rcu_node structure.
*/
TRACE_EVENT(rcu_quiescent_state_report,
TP_PROTO(char *rcuname, unsigned long gpnum,
unsigned long mask, unsigned long qsmask,
u8 level, int grplo, int grphi, int gp_tasks),
TP_ARGS(rcuname, gpnum, mask, qsmask, level, grplo, grphi, gp_tasks),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(unsigned long, gpnum)
__field(unsigned long, mask)
__field(unsigned long, qsmask)
__field(u8, level)
__field(int, grplo)
__field(int, grphi)
__field(u8, gp_tasks)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->gpnum = gpnum;
__entry->mask = mask;
__entry->qsmask = qsmask;
__entry->level = level;
__entry->grplo = grplo;
__entry->grphi = grphi;
__entry->gp_tasks = gp_tasks;
),
TP_printk("%s %lu %lx>%lx %u %d %d %u",
__entry->rcuname, __entry->gpnum,
__entry->mask, __entry->qsmask, __entry->level,
__entry->grplo, __entry->grphi, __entry->gp_tasks)
);
/*
* Tracepoint for quiescent states detected by force_quiescent_state().
* These trace events include the type of RCU, the grace-period number
* that was blocked by the CPU, the CPU itself, and the type of quiescent
* state, which can be "dti" for dyntick-idle mode, "ofl" for CPU offline,
* or "kick" when kicking a CPU that has been in dyntick-idle mode for
* too long.
*/
TRACE_EVENT(rcu_fqs,
TP_PROTO(char *rcuname, unsigned long gpnum, int cpu, char *qsevent),
TP_ARGS(rcuname, gpnum, cpu, qsevent),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(unsigned long, gpnum)
__field(int, cpu)
__field(char *, qsevent)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->gpnum = gpnum;
__entry->cpu = cpu;
__entry->qsevent = qsevent;
),
TP_printk("%s %lu %d %s",
__entry->rcuname, __entry->gpnum,
__entry->cpu, __entry->qsevent)
);
#endif /* #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) */
/*
* Tracepoint for dyntick-idle entry/exit events. These take a string
* as argument: "Start" for entering dyntick-idle mode and "End" for
* leaving it.
*/
TRACE_EVENT(rcu_dyntick,
rcu: Track idleness independent of idle tasks Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-30 13:10:22 -06:00
TP_PROTO(char *polarity, int nesting),
rcu: Track idleness independent of idle tasks Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-30 13:10:22 -06:00
TP_ARGS(polarity, nesting),
TP_STRUCT__entry(
__field(char *, polarity)
rcu: Track idleness independent of idle tasks Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-30 13:10:22 -06:00
__field(int, nesting)
),
TP_fast_assign(
__entry->polarity = polarity;
rcu: Track idleness independent of idle tasks Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-30 13:10:22 -06:00
__entry->nesting = nesting;
),
rcu: Track idleness independent of idle tasks Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-30 13:10:22 -06:00
TP_printk("%s %d", __entry->polarity, __entry->nesting)
);
/*
* Tracepoint for the registration of a single RCU callback function.
* The first argument is the type of RCU, the second argument is
* a pointer to the RCU callback itself, and the third element is the
* new RCU callback queue length for the current CPU.
*/
TRACE_EVENT(rcu_callback,
TP_PROTO(char *rcuname, struct rcu_head *rhp, long qlen),
TP_ARGS(rcuname, rhp, qlen),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(void *, rhp)
__field(void *, func)
__field(long, qlen)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->rhp = rhp;
__entry->func = rhp->func;
__entry->qlen = qlen;
),
TP_printk("%s rhp=%p func=%pf %ld",
__entry->rcuname, __entry->rhp, __entry->func, __entry->qlen)
);
/*
* Tracepoint for the registration of a single RCU callback of the special
* kfree() form. The first argument is the RCU type, the second argument
* is a pointer to the RCU callback, the third argument is the offset
* of the callback within the enclosing RCU-protected data structure,
* and the fourth argument is the new RCU callback queue length for the
* current CPU.
*/
TRACE_EVENT(rcu_kfree_callback,
TP_PROTO(char *rcuname, struct rcu_head *rhp, unsigned long offset,
long qlen),
TP_ARGS(rcuname, rhp, offset, qlen),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(void *, rhp)
__field(unsigned long, offset)
__field(long, qlen)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->rhp = rhp;
__entry->offset = offset;
__entry->qlen = qlen;
),
TP_printk("%s rhp=%p func=%ld %ld",
__entry->rcuname, __entry->rhp, __entry->offset,
__entry->qlen)
);
/*
* Tracepoint for marking the beginning rcu_do_batch, performed to start
* RCU callback invocation. The first argument is the RCU flavor,
* the second is the total number of callbacks (including those that
* are not yet ready to be invoked), and the third argument is the
* current RCU-callback batch limit.
*/
TRACE_EVENT(rcu_batch_start,
TP_PROTO(char *rcuname, long qlen, int blimit),
TP_ARGS(rcuname, qlen, blimit),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(long, qlen)
__field(int, blimit)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->qlen = qlen;
__entry->blimit = blimit;
),
TP_printk("%s CBs=%ld bl=%d",
__entry->rcuname, __entry->qlen, __entry->blimit)
);
/*
* Tracepoint for the invocation of a single RCU callback function.
* The first argument is the type of RCU, and the second argument is
* a pointer to the RCU callback itself.
*/
TRACE_EVENT(rcu_invoke_callback,
TP_PROTO(char *rcuname, struct rcu_head *rhp),
TP_ARGS(rcuname, rhp),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(void *, rhp)
__field(void *, func)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->rhp = rhp;
__entry->func = rhp->func;
),
TP_printk("%s rhp=%p func=%pf",
__entry->rcuname, __entry->rhp, __entry->func)
);
/*
* Tracepoint for the invocation of a single RCU callback of the special
* kfree() form. The first argument is the RCU flavor, the second
* argument is a pointer to the RCU callback, and the third argument
* is the offset of the callback within the enclosing RCU-protected
* data structure.
*/
TRACE_EVENT(rcu_invoke_kfree_callback,
TP_PROTO(char *rcuname, struct rcu_head *rhp, unsigned long offset),
TP_ARGS(rcuname, rhp, offset),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(void *, rhp)
__field(unsigned long, offset)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->rhp = rhp;
__entry->offset = offset;
),
TP_printk("%s rhp=%p func=%ld",
__entry->rcuname, __entry->rhp, __entry->offset)
);
/*
* Tracepoint for exiting rcu_do_batch after RCU callbacks have been
* invoked. The first argument is the name of the RCU flavor and
* the second argument is number of callbacks actually invoked.
*/
TRACE_EVENT(rcu_batch_end,
TP_PROTO(char *rcuname, int callbacks_invoked),
TP_ARGS(rcuname, callbacks_invoked),
TP_STRUCT__entry(
__field(char *, rcuname)
__field(int, callbacks_invoked)
),
TP_fast_assign(
__entry->rcuname = rcuname;
__entry->callbacks_invoked = callbacks_invoked;
),
TP_printk("%s CBs-invoked=%d",
__entry->rcuname, __entry->callbacks_invoked)
);
#else /* #ifdef CONFIG_RCU_TRACE */
#define trace_rcu_grace_period(rcuname, gpnum, gpevent) do { } while (0)
#define trace_rcu_grace_period_init(rcuname, gpnum, level, grplo, grphi, qsmask) do { } while (0)
#define trace_rcu_preempt_task(rcuname, pid, gpnum) do { } while (0)
#define trace_rcu_unlock_preempted_task(rcuname, gpnum, pid) do { } while (0)
#define trace_rcu_quiescent_state_report(rcuname, gpnum, mask, qsmask, level, grplo, grphi, gp_tasks) do { } while (0)
#define trace_rcu_fqs(rcuname, gpnum, cpu, qsevent) do { } while (0)
rcu: Track idleness independent of idle tasks Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-30 13:10:22 -06:00
#define trace_rcu_dyntick(polarity, nesting) do { } while (0)
#define trace_rcu_callback(rcuname, rhp, qlen) do { } while (0)
#define trace_rcu_kfree_callback(rcuname, rhp, offset, qlen) do { } while (0)
#define trace_rcu_batch_start(rcuname, qlen, blimit) do { } while (0)
#define trace_rcu_invoke_callback(rcuname, rhp) do { } while (0)
#define trace_rcu_invoke_kfree_callback(rcuname, rhp, offset) do { } while (0)
#define trace_rcu_batch_end(rcuname, callbacks_invoked) do { } while (0)
#endif /* #else #ifdef CONFIG_RCU_TRACE */
#endif /* _TRACE_RCU_H */
/* This part must be outside protection */
#include <trace/define_trace.h>