1
0
Fork 0
alistair23-linux/include/linux/swap.h

581 lines
18 KiB
C
Raw Normal View History

#ifndef _LINUX_SWAP_H
#define _LINUX_SWAP_H
#include <linux/spinlock.h>
#include <linux/linkage.h>
#include <linux/mmzone.h>
#include <linux/list.h>
#include <linux/memcontrol.h>
#include <linux/sched.h>
#include <linux/node.h>
#include <linux/fs.h>
#include <linux/atomic.h>
#include <linux/page-flags.h>
#include <asm/page.h>
struct notifier_block;
struct bio;
#define SWAP_FLAG_PREFER 0x8000 /* set if swap priority specified */
#define SWAP_FLAG_PRIO_MASK 0x7fff
#define SWAP_FLAG_PRIO_SHIFT 0
swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES Considering the use cases where the swap device supports discard: a) and can do it quickly; b) but it's slow to do in small granularities (or concurrent with other I/O); c) but the implementation is so horrendous that you don't even want to send one down; And assuming that the sysadmin considers it useful to send the discards down at all, we would (probably) want the following solutions: i. do the fine-grained discards for freed swap pages, if device is capable of doing so optimally; ii. do single-time (batched) swap area discards, either at swapon or via something like fstrim (not implemented yet); iii. allow doing both single-time and fine-grained discards; or iv. turn it off completely (default behavior) As implemented today, one can only enable/disable discards for swap, but one cannot select, for instance, solution (ii) on a swap device like (b) even though the single-time discard is regarded to be interesting, or necessary to the workload because it would imply (1), and the device is not capable of performing it optimally. This patch addresses the scenario depicted above by introducing a way to ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly flagged through swapon(8) to allow a sysadmin to select the best suitable swap discard policy accordingly to system constraints. This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE new flags to allow more flexibe swap discard policies being flagged through swapon(8). The default behavior is to keep both single-time, or batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep consistentcy with older kernel behavior, as well as maintain compatibility with older swapon(8). However, through the new introduced flags the best suitable discard policy can be selected accordingly to any given swap device constraint. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:02:46 -06:00
#define SWAP_FLAG_DISCARD 0x10000 /* enable discard for swap */
#define SWAP_FLAG_DISCARD_ONCE 0x20000 /* discard swap area at swapon-time */
#define SWAP_FLAG_DISCARD_PAGES 0x40000 /* discard page-clusters after use */
#define SWAP_FLAGS_VALID (SWAP_FLAG_PRIO_MASK | SWAP_FLAG_PREFER | \
swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES Considering the use cases where the swap device supports discard: a) and can do it quickly; b) but it's slow to do in small granularities (or concurrent with other I/O); c) but the implementation is so horrendous that you don't even want to send one down; And assuming that the sysadmin considers it useful to send the discards down at all, we would (probably) want the following solutions: i. do the fine-grained discards for freed swap pages, if device is capable of doing so optimally; ii. do single-time (batched) swap area discards, either at swapon or via something like fstrim (not implemented yet); iii. allow doing both single-time and fine-grained discards; or iv. turn it off completely (default behavior) As implemented today, one can only enable/disable discards for swap, but one cannot select, for instance, solution (ii) on a swap device like (b) even though the single-time discard is regarded to be interesting, or necessary to the workload because it would imply (1), and the device is not capable of performing it optimally. This patch addresses the scenario depicted above by introducing a way to ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly flagged through swapon(8) to allow a sysadmin to select the best suitable swap discard policy accordingly to system constraints. This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE new flags to allow more flexibe swap discard policies being flagged through swapon(8). The default behavior is to keep both single-time, or batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep consistentcy with older kernel behavior, as well as maintain compatibility with older swapon(8). However, through the new introduced flags the best suitable discard policy can be selected accordingly to any given swap device constraint. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:02:46 -06:00
SWAP_FLAG_DISCARD | SWAP_FLAG_DISCARD_ONCE | \
SWAP_FLAG_DISCARD_PAGES)
static inline int current_is_kswapd(void)
{
return current->flags & PF_KSWAPD;
}
/*
* MAX_SWAPFILES defines the maximum number of swaptypes: things which can
* be swapped to. The swap type and the offset into that swap type are
* encoded into pte's and into pgoff_t's in the swapcache. Using five bits
* for the type means that the maximum number of swapcache pages is 27 bits
* on 32-bit-pgoff_t architectures. And that assumes that the architecture packs
* the type/offset into the pte as 5/27 as well.
*/
#define MAX_SWAPFILES_SHIFT 5
/*
* Use some of the swap files numbers for other purposes. This
* is a convenient way to hook into the VM to trigger special
* actions on faults.
*/
/*
* NUMA node memory migration support
*/
#ifdef CONFIG_MIGRATION
#define SWP_MIGRATION_NUM 2
#define SWP_MIGRATION_READ (MAX_SWAPFILES + SWP_HWPOISON_NUM)
#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + SWP_HWPOISON_NUM + 1)
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 03:03:35 -06:00
#else
#define SWP_MIGRATION_NUM 0
[PATCH] Swapless page migration: add R/W migration entries Implement read/write migration ptes We take the upper two swapfiles for the two types of migration ptes and define a series of macros in swapops.h. The VM is modified to handle the migration entries. migration entries can only be encountered when the page they are pointing to is locked. This limits the number of places one has to fix. We also check in copy_pte_range and in mprotect_pte_range() for migration ptes. We check for migration ptes in do_swap_cache and call a function that will then wait on the page lock. This allows us to effectively stop all accesses to apge. Migration entries are created by try_to_unmap if called for migration and removed by local functions in migrate.c From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration (I've no NUMA, just hacking it up to migrate recklessly while running load), I've hit the BUG_ON(!PageLocked(p)) in migration_entry_to_page. This comes from an orphaned migration entry, unrelated to the current correctly locked migration, but hit by remove_anon_migration_ptes as it checks an address in each vma of the anon_vma list. Such an orphan may be left behind if an earlier migration raced with fork: copy_one_pte can duplicate a migration entry from parent to child, after remove_anon_migration_ptes has checked the child vma, but before it has removed it from the parent vma. (If the process were later to fault on this orphaned entry, it would hit the same BUG from migration_entry_wait.) This could be fixed by locking anon_vma in copy_one_pte, but we'd rather not. There's no such problem with file pages, because vma_prio_tree_add adds child vma after parent vma, and the page table locking at each end is enough to serialize. Follow that example with anon_vma: add new vmas to the tail instead of the head. (There's no corresponding problem when inserting migration entries, because a missed pte will leave the page count and mapcount high, which is allowed for. And there's no corresponding problem when migrating via swap, because a leftover swap entry will be correctly faulted. But the swapless method has no refcounting of its entries.) From: Ingo Molnar <mingo@elte.hu> pte_unmap_unlock() takes the pte pointer as an argument. From: Hugh Dickins <hugh@veritas.com> Several times while testing swapless page migration, gcc has tried to exec a pointer instead of a string: smells like COW mappings are not being properly write-protected on fork. The protection in copy_one_pte looks very convincing, until at last you realize that the second arg to make_migration_entry is a boolean "write", and SWP_MIGRATION_READ is 30. Anyway, it's better done like in change_pte_range, using is_write_migration_entry and make_migration_entry_read. From: Hugh Dickins <hugh@veritas.com> Remove unnecessary obfuscation from sys_swapon's range check on swap type, which blew up causing memory corruption once swapless migration made MAX_SWAPFILES no longer 2 ^ MAX_SWAPFILES_SHIFT. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@engr.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> From: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 03:03:35 -06:00
#endif
/*
* Handling of hardware poisoned pages with memory corruption.
*/
#ifdef CONFIG_MEMORY_FAILURE
#define SWP_HWPOISON_NUM 1
#define SWP_HWPOISON MAX_SWAPFILES
#else
#define SWP_HWPOISON_NUM 0
#endif
#define MAX_SWAPFILES \
((1 << MAX_SWAPFILES_SHIFT) - SWP_MIGRATION_NUM - SWP_HWPOISON_NUM)
/*
* Magic header for a swap area. The first part of the union is
* what the swap magic looks like for the old (limited to 128MB)
* swap area format, the second part of the union adds - in the
* old reserved area - some extra information. Note that the first
* kilobyte is reserved for boot loader or disk label stuff...
*
* Having the magic at the end of the PAGE_SIZE makes detecting swap
* areas somewhat tricky on machines that support multiple page sizes.
* For 2.5 we'll probably want to move the magic to just beyond the
* bootbits...
*/
union swap_header {
struct {
char reserved[PAGE_SIZE - 10];
char magic[10]; /* SWAP-SPACE or SWAPSPACE2 */
} magic;
struct {
char bootbits[1024]; /* Space for disklabel etc. */
__u32 version;
__u32 last_page;
__u32 nr_badpages;
unsigned char sws_uuid[16];
unsigned char sws_volume[16];
__u32 padding[117];
__u32 badpages[1];
} info;
};
/*
* current->reclaim_state points to one of these when a task is running
* memory reclaim
*/
struct reclaim_state {
unsigned long reclaimed_slab;
};
#ifdef __KERNEL__
struct address_space;
struct sysinfo;
struct writeback_control;
struct zone;
/*
* A swap extent maps a range of a swapfile's PAGE_SIZE pages onto a range of
* disk blocks. A list of swap extents maps the entire swapfile. (Where the
* term `swapfile' refers to either a blockdevice or an IS_REG file. Apart
* from setup, they're handled identically.
*
* We always assume that blocks are of size PAGE_SIZE.
*/
struct swap_extent {
struct list_head list;
pgoff_t start_page;
pgoff_t nr_pages;
sector_t start_block;
};
/*
* Max bad pages in the new format..
*/
#define __swapoffset(x) ((unsigned long)&((union swap_header *)0)->x)
#define MAX_SWAP_BADPAGES \
((__swapoffset(magic.magic) - __swapoffset(info.badpages)) / sizeof(int))
enum {
SWP_USED = (1 << 0), /* is slot in swap_info[] used? */
SWP_WRITEOK = (1 << 1), /* ok to write to this swap? */
swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES Considering the use cases where the swap device supports discard: a) and can do it quickly; b) but it's slow to do in small granularities (or concurrent with other I/O); c) but the implementation is so horrendous that you don't even want to send one down; And assuming that the sysadmin considers it useful to send the discards down at all, we would (probably) want the following solutions: i. do the fine-grained discards for freed swap pages, if device is capable of doing so optimally; ii. do single-time (batched) swap area discards, either at swapon or via something like fstrim (not implemented yet); iii. allow doing both single-time and fine-grained discards; or iv. turn it off completely (default behavior) As implemented today, one can only enable/disable discards for swap, but one cannot select, for instance, solution (ii) on a swap device like (b) even though the single-time discard is regarded to be interesting, or necessary to the workload because it would imply (1), and the device is not capable of performing it optimally. This patch addresses the scenario depicted above by introducing a way to ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly flagged through swapon(8) to allow a sysadmin to select the best suitable swap discard policy accordingly to system constraints. This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE new flags to allow more flexibe swap discard policies being flagged through swapon(8). The default behavior is to keep both single-time, or batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep consistentcy with older kernel behavior, as well as maintain compatibility with older swapon(8). However, through the new introduced flags the best suitable discard policy can be selected accordingly to any given swap device constraint. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:02:46 -06:00
SWP_DISCARDABLE = (1 << 2), /* blkdev support discard */
SWP_DISCARDING = (1 << 3), /* now discarding a free cluster */
SWP_SOLIDSTATE = (1 << 4), /* blkdev seeks are cheap */
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:58:46 -07:00
SWP_CONTINUED = (1 << 5), /* swap_map has count continuation */
SWP_BLKDEV = (1 << 6), /* its a block device */
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 17:44:55 -06:00
SWP_FILE = (1 << 7), /* set after swap_activate success */
swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES Considering the use cases where the swap device supports discard: a) and can do it quickly; b) but it's slow to do in small granularities (or concurrent with other I/O); c) but the implementation is so horrendous that you don't even want to send one down; And assuming that the sysadmin considers it useful to send the discards down at all, we would (probably) want the following solutions: i. do the fine-grained discards for freed swap pages, if device is capable of doing so optimally; ii. do single-time (batched) swap area discards, either at swapon or via something like fstrim (not implemented yet); iii. allow doing both single-time and fine-grained discards; or iv. turn it off completely (default behavior) As implemented today, one can only enable/disable discards for swap, but one cannot select, for instance, solution (ii) on a swap device like (b) even though the single-time discard is regarded to be interesting, or necessary to the workload because it would imply (1), and the device is not capable of performing it optimally. This patch addresses the scenario depicted above by introducing a way to ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly flagged through swapon(8) to allow a sysadmin to select the best suitable swap discard policy accordingly to system constraints. This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE new flags to allow more flexibe swap discard policies being flagged through swapon(8). The default behavior is to keep both single-time, or batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep consistentcy with older kernel behavior, as well as maintain compatibility with older swapon(8). However, through the new introduced flags the best suitable discard policy can be selected accordingly to any given swap device constraint. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:02:46 -06:00
SWP_AREA_DISCARD = (1 << 8), /* single-time swap area discards */
SWP_PAGE_DISCARD = (1 << 9), /* freed swap page-cluster discards */
/* add others here before... */
swap: discard while swapping only if SWAP_FLAG_DISCARD_PAGES Considering the use cases where the swap device supports discard: a) and can do it quickly; b) but it's slow to do in small granularities (or concurrent with other I/O); c) but the implementation is so horrendous that you don't even want to send one down; And assuming that the sysadmin considers it useful to send the discards down at all, we would (probably) want the following solutions: i. do the fine-grained discards for freed swap pages, if device is capable of doing so optimally; ii. do single-time (batched) swap area discards, either at swapon or via something like fstrim (not implemented yet); iii. allow doing both single-time and fine-grained discards; or iv. turn it off completely (default behavior) As implemented today, one can only enable/disable discards for swap, but one cannot select, for instance, solution (ii) on a swap device like (b) even though the single-time discard is regarded to be interesting, or necessary to the workload because it would imply (1), and the device is not capable of performing it optimally. This patch addresses the scenario depicted above by introducing a way to ensure the (probably) wanted solutions (i, ii, iii and iv) can be flexibly flagged through swapon(8) to allow a sysadmin to select the best suitable swap discard policy accordingly to system constraints. This patch introduces SWAP_FLAG_DISCARD_PAGES and SWAP_FLAG_DISCARD_ONCE new flags to allow more flexibe swap discard policies being flagged through swapon(8). The default behavior is to keep both single-time, or batched, area discards (SWAP_FLAG_DISCARD_ONCE) and fine-grained discards for page-clusters (SWAP_FLAG_DISCARD_PAGES) enabled, in order to keep consistentcy with older kernel behavior, as well as maintain compatibility with older swapon(8). However, through the new introduced flags the best suitable discard policy can be selected accordingly to any given swap device constraint. [akpm@linux-foundation.org: tweak comments] Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Cc: Karel Zak <kzak@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:02:46 -06:00
SWP_SCANNING = (1 << 10), /* refcount in scan_swap_map */
};
#define SWAP_CLUSTER_MAX 32UL
#define COMPACT_CLUSTER_MAX SWAP_CLUSTER_MAX
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:58:46 -07:00
#define SWAP_MAP_MAX 0x3e /* Max duplication count, in first swap_map */
#define SWAP_MAP_BAD 0x3f /* Note pageblock is bad, in first swap_map */
#define SWAP_HAS_CACHE 0x40 /* Flag page is cached, in first swap_map */
#define SWAP_CONT_MAX 0x7f /* Max count, in each swap_map continuation */
#define COUNT_CONTINUED 0x80 /* See swap_map continuation for full count */
#define SWAP_MAP_SHMEM 0xbf /* Owned by shmem/tmpfs, in first swap_map */
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:20:28 -06:00
/*
* We use this to track usage of a cluster. A cluster is a block of swap disk
* space with SWAPFILE_CLUSTER pages long and naturally aligns in disk. All
* free clusters are organized into a list. We fetch an entry from the list to
* get a free cluster.
*
* The data field stores next cluster if the cluster is free or cluster usage
* counter otherwise. The flags field determines if a cluster is free. This is
* protected by swap_info_struct.lock.
*/
struct swap_cluster_info {
unsigned int data:24;
unsigned int flags:8;
};
#define CLUSTER_FLAG_FREE 1 /* This cluster is free */
#define CLUSTER_FLAG_NEXT_NULL 2 /* This cluster has no next cluster */
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:20:32 -06:00
/*
* We assign a cluster to each CPU, so each CPU can allocate swap entry from
* its own cluster and swapout sequentially. The purpose is to optimize swapout
* throughput.
*/
struct percpu_cluster {
struct swap_cluster_info index; /* Current cluster index */
unsigned int next; /* Likely next allocation offset */
};
/*
* The in-memory structure used to track swap areas.
*/
struct swap_info_struct {
unsigned long flags; /* SWP_USED etc: see above */
signed short prio; /* swap priority of this type */
swap: change swap_list_head to plist, add swap_avail_head Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 17:09:59 -06:00
struct plist_node list; /* entry in swap_active_head */
struct plist_node avail_list; /* entry in swap_avail_head */
signed char type; /* strange name for an index */
unsigned int max; /* extent of the swap_map */
unsigned char *swap_map; /* vmalloc'ed array of usage counts */
swap: change block allocation algorithm for SSD I'm using a fast SSD to do swap. scan_swap_map() sometimes uses up to 20~30% CPU time (when cluster is hard to find, the CPU time can be up to 80%), which becomes a bottleneck. scan_swap_map() scans a byte array to search a 256 page cluster, which is very slow. Here I introduced a simple algorithm to search cluster. Since we only care about 256 pages cluster, we can just use a counter to track if a cluster is free. Every 256 pages use one int to store the counter. If the counter of a cluster is 0, the cluster is free. All free clusters will be added to a list, so searching cluster is very efficient. With this, scap_swap_map() overhead disappears. This might help low end SD card swap too. Because if the cluster is aligned, SD firmware can do flash erase more efficiently. We only enable the algorithm for SSD. Hard disk swap isn't fast enough and has downside with the algorithm which might introduce regression (see below). The patch slightly changes which cluster is choosen. It always adds free cluster to list tail. This can help wear leveling for low end SSD too. And if no cluster found, the scan_swap_map() will do search from the end of last cluster. So if no cluster found, the scan_swap_map() will do search from the end of last free cluster, which is random. For SSD, this isn't a problem at all. Another downside is the cluster must be aligned to 256 pages, which will reduce the chance to find a cluster. I would expect this isn't a big problem for SSD because of the non-seek penality. (And this is the reason I only enable the algorithm for SSD). Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:20:28 -06:00
struct swap_cluster_info *cluster_info; /* cluster info. Only for SSD */
struct swap_cluster_info free_cluster_head; /* free cluster list head */
struct swap_cluster_info free_cluster_tail; /* free cluster list tail */
unsigned int lowest_bit; /* index of first free in swap_map */
unsigned int highest_bit; /* index of last free in swap_map */
unsigned int pages; /* total of usable pages of swap */
unsigned int inuse_pages; /* number of those currently in use */
unsigned int cluster_next; /* likely index for next allocation */
unsigned int cluster_nr; /* countdown to next cluster search */
swap: make cluster allocation per-cpu swap cluster allocation is to get better request merge to improve performance. But the cluster is shared globally, if multiple tasks are doing swap, this will cause interleave disk access. While multiple tasks swap is quite common, for example, each numa node has a kswapd thread doing swap and multiple threads/processes doing direct page reclaim. ioscheduler can't help too much here, because tasks don't send swapout IO down to block layer in the meantime. Block layer does merge some IOs, but a lot not, depending on how many tasks are doing swapout concurrently. In practice, I've seen a lot of small size IO in swapout workloads. We makes the cluster allocation per-cpu here. The interleave disk access issue goes away. All tasks swapout to their own cluster, so swapout will become sequential, which can be easily merged to big size IO. If one CPU can't get its per-cpu cluster (for example, there is no free cluster anymore in the swap), it will fallback to scan swap_map. The CPU can still continue swap. We don't need recycle free swap entries of other CPUs. In my test (swap to a 2-disk raid0 partition), this improves around 10% swapout throughput, and request size is increased significantly. How does this impact swap readahead is uncertain though. On one side, page reclaim always isolates and swaps several adjancent pages, this will make page reclaim write the pages sequentially and benefit readahead. On the other side, several CPU write pages interleave means the pages don't live _sequentially_ but relatively _near_. In the per-cpu allocation case, if adjancent pages are written by different cpus, they will live relatively _far_. So how this impacts swap readahead depends on how many pages page reclaim isolates and swaps one time. If the number is big, this patch will benefit swap readahead. Of course, this is about sequential access pattern. The patch has no impact for random access pattern, because the new cluster allocation algorithm is just for SSD. Alternative solution is organizing swap layout to be per-mm instead of this per-cpu approach. In the per-mm layout, we allocate a disk range for each mm, so pages of one mm live in swap disk adjacently. per-mm layout has potential issues of lock contention if multiple reclaimers are swap pages from one mm. For a sequential workload, per-mm layout is better to implement swap readahead, because pages from the mm are adjacent in disk. But per-cpu layout isn't very bad in this workload, as page reclaim always isolates and swaps several pages one time, such pages will still live in disk sequentially and readahead can utilize this. For a random workload, per-mm layout isn't beneficial of request merge, because it's quite possible pages from different mm are swapout in the meantime and IO can't be merged in per-mm layout. while with per-cpu layout we can merge requests from any mm. Considering random workload is more popular in workloads with swap (and per-cpu approach isn't too bad for sequential workload too), I'm choosing per-cpu layout. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:20:32 -06:00
struct percpu_cluster __percpu *percpu_cluster; /* per cpu's swap location */
struct swap_extent *curr_swap_extent;
struct swap_extent first_swap_extent;
struct block_device *bdev; /* swap device or bdev of swap file */
struct file *swap_file; /* seldom referenced */
unsigned int old_block_size; /* seldom referenced */
mm: frontswap: core swap subsystem hooks and headers This patch, 2of4, contains the changes to the core swap subsystem. This includes: (1) makes available core swap data structures (swap_lock, swap_list and swap_info) that are needed by frontswap.c but we don't need to expose them to the dozens of files that include swap.h so we create a new swapfile.h just to extern-ify these and modify their declarations to non-static (2) adds frontswap-related elements to swap_info_struct. Frontswap_map points to vzalloc'ed one-bit-per-swap-page metadata that indicates whether the swap page is in frontswap or in the device and frontswap_pages counts how many pages are in frontswap. (3) adds hooks in the swap subsystem and extends try_to_unuse so that frontswap_shrink can do a "partial swapoff". Note that a failed frontswap_map allocation is safe... failure is noted by lack of "FS" in the subsequent printk. --- [v14: rebase to 3.4-rc2] [v10: no change] [v9: akpm@linux-foundation.org: mark some statics __read_mostly] [v9: akpm@linux-foundation.org: add clarifying comments] [v9: akpm@linux-foundation.org: no need to loop repeating try_to_unuse] [v9: error27@gmail.com: remove superfluous check for NULL] [v8: rebase to 3.0-rc4] [v8: kamezawa.hiroyu@jp.fujitsu.com: change counter to atomic_t to avoid races] [v8: kamezawa.hiroyu@jp.fujitsu.com: comment to clarify informational counters] [v7: rebase to 3.0-rc3] [v7: JBeulich@novell.com: add new swap struct elements only if config'd] [v6: rebase to 3.0-rc1] [v6: lliubbo@gmail.com: fix null pointer deref if vzalloc fails] [v6: konrad.wilk@oracl.com: various checks and code clarifications/comments] [v5: no change from v4] [v4: rebase to 2.6.39] Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Reviewed-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Jan Beulich <JBeulich@novell.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Chris Mason <chris.mason@oracle.com> Cc: Rik Riel <riel@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> [v11: Rebased, fixed mm/swapfile.c context change] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-09 17:08:06 -06:00
#ifdef CONFIG_FRONTSWAP
unsigned long *frontswap_map; /* frontswap in-use, one bit per page */
atomic_t frontswap_pages; /* frontswap pages in-use counter */
#endif
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 17:34:38 -07:00
spinlock_t lock; /*
* protect map scan related fields like
* swap_map, lowest_bit, highest_bit,
* inuse_pages, cluster_next,
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:20:30 -06:00
* cluster_nr, lowest_alloc,
* highest_alloc, free/discard cluster
* list. other fields are only changed
* at swapon/swapoff, so are protected
* by swap_lock. changing flags need
* hold this lock and swap_lock. If
* both locks need hold, hold swap_lock
* first.
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 17:34:38 -07:00
*/
swap: make swap discard async swap can do cluster discard for SSD, which is good, but there are some problems here: 1. swap do the discard just before page reclaim gets a swap entry and writes the disk sectors. This is useless for high end SSD, because an overwrite to a sector implies a discard to original sector too. A discard + overwrite == overwrite. 2. the purpose of doing discard is to improve SSD firmware garbage collection. Idealy we should send discard as early as possible, so firmware can do something smart. Sending discard just after swap entry is freed is considered early compared to sending discard before write. Of course, if workload is already bound to gc speed, sending discard earlier or later doesn't make 3. block discard is a sync API, which will delay scan_swap_map() significantly. 4. Write and discard command can be executed parallel in PCIe SSD. Making swap discard async can make execution more efficiently. This patch makes swap discard async and moves discard to where swap entry is freed. Discard and write have no dependence now, so above issues can be avoided. Idealy we should do discard for any freed sectors, but some SSD discard is very slow. This patch still does discard for a whole cluster. My test does a several round of 'mmap, write, unmap', which will trigger a lot of swap discard. In a fusionio card, with this patch, the test runtime is reduced to 18% of the time without it, so around 5.5x faster. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:20:30 -06:00
struct work_struct discard_work; /* discard worker */
struct swap_cluster_info discard_cluster_head; /* list head of discard clusters */
struct swap_cluster_info discard_cluster_tail; /* list tail of discard clusters */
};
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 15:47:51 -06:00
/* linux/mm/workingset.c */
void *workingset_eviction(struct address_space *mapping, struct page *page);
bool workingset_refault(void *shadow);
void workingset_activation(struct page *page);
mm: keep page cache radix tree nodes in check Previously, page cache radix tree nodes were freed after reclaim emptied out their page pointers. But now reclaim stores shadow entries in their place, which are only reclaimed when the inodes themselves are reclaimed. This is problematic for bigger files that are still in use after they have a significant amount of their cache reclaimed, without any of those pages actually refaulting. The shadow entries will just sit there and waste memory. In the worst case, the shadow entries will accumulate until the machine runs out of memory. To get this under control, the VM will track radix tree nodes exclusively containing shadow entries on a per-NUMA node list. Per-NUMA rather than global because we expect the radix tree nodes themselves to be allocated node-locally and we want to reduce cross-node references of otherwise independent cache workloads. A simple shrinker will then reclaim these nodes on memory pressure. A few things need to be stored in the radix tree node to implement the shadow node LRU and allow tree deletions coming from the list: 1. There is no index available that would describe the reverse path from the node up to the tree root, which is needed to perform a deletion. To solve this, encode in each node its offset inside the parent. This can be stored in the unused upper bits of the same member that stores the node's height at no extra space cost. 2. The number of shadow entries needs to be counted in addition to the regular entries, to quickly detect when the node is ready to go to the shadow node LRU list. The current entry count is an unsigned int but the maximum number of entries is 64, so a shadow counter can easily be stored in the unused upper bits. 3. Tree modification needs tree lock and tree root, which are located in the address space, so store an address_space backpointer in the node. The parent pointer of the node is in a union with the 2-word rcu_head, so the backpointer comes at no extra cost as well. 4. The node needs to be linked to an LRU list, which requires a list head inside the node. This does increase the size of the node, but it does not change the number of objects that fit into a slab page. [akpm@linux-foundation.org: export the right function] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 15:47:56 -06:00
extern struct list_lru workingset_shadow_nodes;
static inline unsigned int workingset_node_pages(struct radix_tree_node *node)
{
return node->count & RADIX_TREE_COUNT_MASK;
}
static inline void workingset_node_pages_inc(struct radix_tree_node *node)
{
node->count++;
}
static inline void workingset_node_pages_dec(struct radix_tree_node *node)
{
node->count--;
}
static inline unsigned int workingset_node_shadows(struct radix_tree_node *node)
{
return node->count >> RADIX_TREE_COUNT_SHIFT;
}
static inline void workingset_node_shadows_inc(struct radix_tree_node *node)
{
node->count += 1U << RADIX_TREE_COUNT_SHIFT;
}
static inline void workingset_node_shadows_dec(struct radix_tree_node *node)
{
node->count -= 1U << RADIX_TREE_COUNT_SHIFT;
}
mm: thrash detection-based file cache sizing The VM maintains cached filesystem pages on two types of lists. One list holds the pages recently faulted into the cache, the other list holds pages that have been referenced repeatedly on that first list. The idea is to prefer reclaiming young pages over those that have shown to benefit from caching in the past. We call the recently usedbut ultimately was not significantly better than a FIFO policy and still thrashed cache based on eviction speed, rather than actual demand for cache. This patch solves one half of the problem by decoupling the ability to detect working set changes from the inactive list size. By maintaining a history of recently evicted file pages it can detect frequently used pages with an arbitrarily small inactive list size, and subsequently apply pressure on the active list based on actual demand for cache, not just overall eviction speed. Every zone maintains a counter that tracks inactive list aging speed. When a page is evicted, a snapshot of this counter is stored in the now-empty page cache radix tree slot. On refault, the minimum access distance of the page can be assessed, to evaluate whether the page should be part of the active list or not. This fixes the VM's blindness towards working set changes in excess of the inactive list. And it's the foundation to further improve the protection ability and reduce the minimum inactive list size of 50%. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Bob Liu <bob.liu@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 15:47:51 -06:00
/* linux/mm/page_alloc.c */
extern unsigned long totalram_pages;
[PATCH] overcommit: add calculate_totalreserve_pages() These patches are an enhancement of OVERCOMMIT_GUESS algorithm in __vm_enough_memory(). - why the kernel needed patching When the kernel can't allocate anonymous pages in practice, currnet OVERCOMMIT_GUESS could return success. This implementation might be the cause of oom kill in memory pressure situation. If the Linux runs with page reservation features like /proc/sys/vm/lowmem_reserve_ratio and without swap region, I think the oom kill occurs easily. - the overall design approach in the patch When the OVERCOMMET_GUESS algorithm calculates number of free pages, the reserved free pages are regarded as non-free pages. This change helps to avoid the pitfall that the number of free pages become less than the number which the kernel tries to keep free. - testing results I tested the patches using my test kernel module. If the patches aren't applied to the kernel, __vm_enough_memory() returns success in the situation but autual page allocation is failed. On the other hand, if the patches are applied to the kernel, memory allocation failure is avoided since __vm_enough_memory() returns failure in the situation. I checked that on i386 SMP 16GB memory machine. I haven't tested on nommu environment currently. This patch adds totalreserve_pages for __vm_enough_memory(). Calculate_totalreserve_pages() checks maximum lowmem_reserve pages and pages_high in each zone. Finally, the function stores the sum of each zone to totalreserve_pages. The totalreserve_pages is calculated when the VM is initilized. And the variable is updated when /proc/sys/vm/lowmem_reserve_raito or /proc/sys/vm/min_free_kbytes are changed. Signed-off-by: Hideo Aoki <haoki@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-10 23:52:59 -06:00
extern unsigned long totalreserve_pages;
extern unsigned long nr_free_buffer_pages(void);
extern unsigned long nr_free_pagecache_pages(void);
/* Definition of global_page_state not available yet */
#define nr_free_pages() global_page_state(NR_FREE_PAGES)
/* linux/mm/swap.c */
extern void lru_cache_add(struct page *);
extern void lru_cache_add_anon(struct page *page);
extern void lru_cache_add_file(struct page *page);
extern void lru_add_page_tail(struct page *page, struct page *page_tail,
struct lruvec *lruvec, struct list_head *head);
extern void activate_page(struct page *);
extern void mark_page_accessed(struct page *);
extern void lru_add_drain(void);
extern void lru_add_drain_cpu(int cpu);
extern void lru_add_drain_all(void);
extern void rotate_reclaimable_page(struct page *page);
extern void deactivate_file_page(struct page *page);
mm: move lazily freed pages to inactive list MADV_FREE is a hint that it's okay to discard pages if there is memory pressure and we use reclaimers(ie, kswapd and direct reclaim) to free them so there is no value keeping them in the active anonymous LRU so this patch moves them to inactive LRU list's head. This means that MADV_FREE-ed pages which were living on the inactive list are reclaimed first because they are more likely to be cold rather than recently active pages. An arguable issue for the approach would be whether we should put the page to the head or tail of the inactive list. I chose head because the kernel cannot make sure it's really cold or warm for every MADV_FREE usecase but at least we know it's not *hot*, so landing of inactive head would be a comprimise for various usecases. This fixes suboptimal behavior of MADV_FREE when pages living on the active list will sit there for a long time even under memory pressure while the inactive list is reclaimed heavily. This basically breaks the whole purpose of using MADV_FREE to help the system to free memory which is might not be used. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: <yalin.wang2010@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jason Evans <je@fb.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Mika Penttil <mika.penttila@nextfour.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Roland Dreier <roland@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-15 17:55:11 -07:00
extern void deactivate_page(struct page *page);
extern void swap_setup(void);
Unevictable LRU Infrastructure When the system contains lots of mlocked or otherwise unevictable pages, the pageout code (kswapd) can spend lots of time scanning over these pages. Worse still, the presence of lots of unevictable pages can confuse kswapd into thinking that more aggressive pageout modes are required, resulting in all kinds of bad behaviour. Infrastructure to manage pages excluded from reclaim--i.e., hidden from vmscan. Based on a patch by Larry Woodman of Red Hat. Reworked to maintain "unevictable" pages on a separate per-zone LRU list, to "hide" them from vmscan. Kosaki Motohiro added the support for the memory controller unevictable lru list. Pages on the unevictable list have both PG_unevictable and PG_lru set. Thus, PG_unevictable is analogous to and mutually exclusive with PG_active--it specifies which LRU list the page is on. The unevictable infrastructure is enabled by a new mm Kconfig option [CONFIG_]UNEVICTABLE_LRU. A new function 'page_evictable(page, vma)' in vmscan.c tests whether or not a page may be evictable. Subsequent patches will add the various !evictable tests. We'll want to keep these tests light-weight for use in shrink_active_list() and, possibly, the fault path. To avoid races between tasks putting pages [back] onto an LRU list and tasks that might be moving the page from non-evictable to evictable state, the new function 'putback_lru_page()' -- inverse to 'isolate_lru_page()' -- tests the "evictability" of a page after placing it on the LRU, before dropping the reference. If the page has become unevictable, putback_lru_page() will redo the 'putback', thus moving the page to the unevictable list. This way, we avoid "stranding" evictable pages on the unevictable list. [akpm@linux-foundation.org: fix fallout from out-of-order merge] [riel@redhat.com: fix UNEVICTABLE_LRU and !PROC_PAGE_MONITOR build] [nishimura@mxp.nes.nec.co.jp: remove redundant mapping check] [kosaki.motohiro@jp.fujitsu.com: unevictable-lru-infrastructure: putback_lru_page()/unevictable page handling rework] [kosaki.motohiro@jp.fujitsu.com: kill unnecessary lock_page() in vmscan.c] [kosaki.motohiro@jp.fujitsu.com: revert migration change of unevictable lru infrastructure] [kosaki.motohiro@jp.fujitsu.com: revert to unevictable-lru-infrastructure-kconfig-fix.patch] [kosaki.motohiro@jp.fujitsu.com: restore patch failure of vmstat-unevictable-and-mlocked-pages-vm-events.patch] Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Rik van Riel <riel@redhat.com> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Debugged-by: Benjamin Kidwell <benjkidwell@yahoo.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-18 21:26:39 -06:00
extern void add_page_to_unevictable_list(struct page *page);
mm: memcontrol: rewrite charge API These patches rework memcg charge lifetime to integrate more naturally with the lifetime of user pages. This drastically simplifies the code and reduces charging and uncharging overhead. The most expensive part of charging and uncharging is the page_cgroup bit spinlock, which is removed entirely after this series. Here are the top-10 profile entries of a stress test that reads a 128G sparse file on a freshly booted box, without even a dedicated cgroup (i.e. executing in the root memcg). Before: 15.36% cat [kernel.kallsyms] [k] copy_user_generic_string 13.31% cat [kernel.kallsyms] [k] memset 11.48% cat [kernel.kallsyms] [k] do_mpage_readpage 4.23% cat [kernel.kallsyms] [k] get_page_from_freelist 2.38% cat [kernel.kallsyms] [k] put_page 2.32% cat [kernel.kallsyms] [k] __mem_cgroup_commit_charge 2.18% kswapd0 [kernel.kallsyms] [k] __mem_cgroup_uncharge_common 1.92% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.86% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.62% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn After: 15.67% cat [kernel.kallsyms] [k] copy_user_generic_string 13.48% cat [kernel.kallsyms] [k] memset 11.42% cat [kernel.kallsyms] [k] do_mpage_readpage 3.98% cat [kernel.kallsyms] [k] get_page_from_freelist 2.46% cat [kernel.kallsyms] [k] put_page 2.13% kswapd0 [kernel.kallsyms] [k] shrink_page_list 1.88% cat [kernel.kallsyms] [k] __radix_tree_lookup 1.67% cat [kernel.kallsyms] [k] __pagevec_lru_add_fn 1.39% kswapd0 [kernel.kallsyms] [k] free_pcppages_bulk 1.30% cat [kernel.kallsyms] [k] kfree As you can see, the memcg footprint has shrunk quite a bit. text data bss dec hex filename 37970 9892 400 48262 bc86 mm/memcontrol.o.old 35239 9892 400 45531 b1db mm/memcontrol.o This patch (of 4): The memcg charge API charges pages before they are rmapped - i.e. have an actual "type" - and so every callsite needs its own set of charge and uncharge functions to know what type is being operated on. Worse, uncharge has to happen from a context that is still type-specific, rather than at the end of the page's lifetime with exclusive access, and so requires a lot of synchronization. Rewrite the charge API to provide a generic set of try_charge(), commit_charge() and cancel_charge() transaction operations, much like what's currently done for swap-in: mem_cgroup_try_charge() attempts to reserve a charge, reclaiming pages from the memcg if necessary. mem_cgroup_commit_charge() commits the page to the charge once it has a valid page->mapping and PageAnon() reliably tells the type. mem_cgroup_cancel_charge() aborts the transaction. This reduces the charge API and enables subsequent patches to drastically simplify uncharging. As pages need to be committed after rmap is established but before they are added to the LRU, page_add_new_anon_rmap() must stop doing LRU additions again. Revive lru_cache_add_active_or_unevictable(). [hughd@google.com: fix shmem_unuse] [hughd@google.com: Add comments on the private use of -EAGAIN] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:19:20 -06:00
extern void lru_cache_add_active_or_unevictable(struct page *page,
struct vm_area_struct *vma);
/* linux/mm/vmscan.c */
mm, oom: rework oom detection __alloc_pages_slowpath has traditionally relied on the direct reclaim and did_some_progress as an indicator that it makes sense to retry allocation rather than declaring OOM. shrink_zones had to rely on zone_reclaimable if shrink_zone didn't make any progress to prevent from a premature OOM killer invocation - the LRU might be full of dirty or writeback pages and direct reclaim cannot clean those up. zone_reclaimable allows to rescan the reclaimable lists several times and restart if a page is freed. This is really subtle behavior and it might lead to a livelock when a single freed page keeps allocator looping but the current task will not be able to allocate that single page. OOM killer would be more appropriate than looping without any progress for unbounded amount of time. This patch changes OOM detection logic and pulls it out from shrink_zone which is too low to be appropriate for any high level decisions such as OOM which is per zonelist property. It is __alloc_pages_slowpath which knows how many attempts have been done and what was the progress so far therefore it is more appropriate to implement this logic. The new heuristic is implemented in should_reclaim_retry helper called from __alloc_pages_slowpath. It tries to be more deterministic and easier to follow. It builds on an assumption that retrying makes sense only if the currently reclaimable memory + free pages would allow the current allocation request to succeed (as per __zone_watermark_ok) at least for one zone in the usable zonelist. This alone wouldn't be sufficient, though, because the writeback might get stuck and reclaimable pages might be pinned for a really long time or even depend on the current allocation context. Therefore there is a backoff mechanism implemented which reduces the reclaim target after each reclaim round without any progress. This means that we should eventually converge to only NR_FREE_PAGES as the target and fail on the wmark check and proceed to OOM. The backoff is simple and linear with 1/16 of the reclaimable pages for each round without any progress. We are optimistic and reset counter for successful reclaim rounds. Costly high order pages mostly preserve their semantic and those without __GFP_REPEAT fail right away while those which have the flag set will back off after the amount of reclaimable pages reaches equivalent of the requested order. The only difference is that if there was no progress during the reclaim we rely on zone watermark check. This is more logical thing to do than previous 1<<order attempts which were a result of zone_reclaimable faking the progress. [vdavydov@virtuozzo.com: check classzone_idx for shrink_zone] [hannes@cmpxchg.org: separate the heuristic into should_reclaim_retry] [rientjes@google.com: use zone_page_state_snapshot for NR_FREE_PAGES] [rientjes@google.com: shrink_zones doesn't need to return anything] Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-20 17:57:00 -06:00
extern unsigned long zone_reclaimable_pages(struct zone *zone);
mm, vmscan: move LRU lists to node This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:45:31 -06:00
extern unsigned long pgdat_reclaimable_pages(struct pglist_data *pgdat);
mm: use zonelists instead of zones when direct reclaiming pages The following patches replace multiple zonelists per node with two zonelists that are filtered based on the GFP flags. The patches as a set fix a bug with regard to the use of MPOL_BIND and ZONE_MOVABLE. With this patchset, the MPOL_BIND will apply to the two highest zones when the highest zone is ZONE_MOVABLE. This should be considered as an alternative fix for the MPOL_BIND+ZONE_MOVABLE in 2.6.23 to the previously discussed hack that filters only custom zonelists. The first patch cleans up an inconsistency where direct reclaim uses zonelist->zones where other places use zonelist. The second patch introduces a helper function node_zonelist() for looking up the appropriate zonelist for a GFP mask which simplifies patches later in the set. The third patch defines/remembers the "preferred zone" for numa statistics, as it is no longer always the first zone in a zonelist. The forth patch replaces multiple zonelists with two zonelists that are filtered. The two zonelists are due to the fact that the memoryless patchset introduces a second set of zonelists for __GFP_THISNODE. The fifth patch introduces helper macros for retrieving the zone and node indices of entries in a zonelist. The final patch introduces filtering of the zonelists based on a nodemask. Two zonelists exist per node, one for normal allocations and one for __GFP_THISNODE. Performance results varied depending on the machine configuration. In real workloads the gain/loss will depend on how much the userspace portion of the benchmark benefits from having more cache available due to reduced referencing of zonelists. These are the range of performance losses/gains when running against 2.6.24-rc4-mm1. The set and these machines are a mix of i386, x86_64 and ppc64 both NUMA and non-NUMA. loss to gain Total CPU time on Kernbench: -0.86% to 1.13% Elapsed time on Kernbench: -0.79% to 0.76% page_test from aim9: -4.37% to 0.79% brk_test from aim9: -0.71% to 4.07% fork_test from aim9: -1.84% to 4.60% exec_test from aim9: -0.71% to 1.08% This patch: The allocator deals with zonelists which indicate the order in which zones should be targeted for an allocation. Similarly, direct reclaim of pages iterates over an array of zones. For consistency, this patch converts direct reclaim to use a zonelist. No functionality is changed by this patch. This simplifies zonelist iterators in the next patch. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 03:12:12 -06:00
extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
gfp_t gfp_mask, nodemask_t *mask);
extern int __isolate_lru_page(struct page *page, isolate_mode_t mode);
mm: memcontrol: fix transparent huge page allocations under pressure In a memcg with even just moderate cache pressure, success rates for transparent huge page allocations drop to zero, wasting a lot of effort that the allocator puts into assembling these pages. The reason for this is that the memcg reclaim code was never designed for higher-order charges. It reclaims in small batches until there is room for at least one page. Huge page charges only succeed when these batches add up over a series of huge faults, which is unlikely under any significant load involving order-0 allocations in the group. Remove that loop on the memcg side in favor of passing the actual reclaim goal to direct reclaim, which is already set up and optimized to meet higher-order goals efficiently. This brings memcg's THP policy in line with the system policy: if the allocator painstakingly assembles a hugepage, memcg will at least make an honest effort to charge it. As a result, transparent hugepage allocation rates amid cache activity are drastically improved: vanilla patched pgalloc 4717530.80 ( +0.00%) 4451376.40 ( -5.64%) pgfault 491370.60 ( +0.00%) 225477.40 ( -54.11%) pgmajfault 2.00 ( +0.00%) 1.80 ( -6.67%) thp_fault_alloc 0.00 ( +0.00%) 531.60 (+100.00%) thp_fault_fallback 749.00 ( +0.00%) 217.40 ( -70.88%) [ Note: this may in turn increase memory consumption from internal fragmentation, which is an inherent risk of transparent hugepages. Some setups may have to adjust the memcg limits accordingly to accomodate this - or, if the machine is already packed to capacity, disable the transparent huge page feature. ] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@sr71.net> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09 16:28:56 -06:00
extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *memcg,
unsigned long nr_pages,
gfp_t gfp_mask,
bool may_swap);
extern unsigned long mem_cgroup_shrink_node(struct mem_cgroup *mem,
gfp_t gfp_mask, bool noswap,
struct zone *zone,
unsigned long *nr_scanned);
extern unsigned long shrink_all_memory(unsigned long nr_pages);
extern int vm_swappiness;
extern int remove_mapping(struct address_space *mapping, struct page *page);
extern unsigned long vm_total_pages;
#ifdef CONFIG_NUMA
extern int zone_reclaim_mode;
extern int sysctl_min_unmapped_ratio;
[PATCH] zone_reclaim: dynamic slab reclaim Currently one can enable slab reclaim by setting an explicit option in /proc/sys/vm/zone_reclaim_mode. Slab reclaim is then used as a final option if the freeing of unmapped file backed pages is not enough to free enough pages to allow a local allocation. However, that means that the slab can grow excessively and that most memory of a node may be used by slabs. We have had a case where a machine with 46GB of memory was using 40-42GB for slab. Zone reclaim was effective in dealing with pagecache pages. However, slab reclaim was only done during global reclaim (which is a bit rare on NUMA systems). This patch implements slab reclaim during zone reclaim. Zone reclaim occurs if there is a danger of an off node allocation. At that point we 1. Shrink the per node page cache if the number of pagecache pages is more than min_unmapped_ratio percent of pages in a zone. 2. Shrink the slab cache if the number of the nodes reclaimable slab pages (patch depends on earlier one that implements that counter) are more than min_slab_ratio (a new /proc/sys/vm tunable). The shrinking of the slab cache is a bit problematic since it is not node specific. So we simply calculate what point in the slab we want to reach (current per node slab use minus the number of pages that neeed to be allocated) and then repeately run the global reclaim until that is unsuccessful or we have reached the limit. I hope we will have zone based slab reclaim at some point which will make that easier. The default for the min_slab_ratio is 5% Also remove the slab option from /proc/sys/vm/zone_reclaim_mode. [akpm@osdl.org: cleanups] Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 00:31:52 -06:00
extern int sysctl_min_slab_ratio;
extern int zone_reclaim(struct zone *, gfp_t, unsigned int);
#else
#define zone_reclaim_mode 0
static inline int zone_reclaim(struct zone *z, gfp_t mask, unsigned int order)
{
return 0;
}
#endif
extern int page_evictable(struct page *page);
SHM_UNLOCK: fix Unevictable pages stranded after swap Commit cc39c6a9bbde ("mm: account skipped entries to avoid looping in find_get_pages") correctly fixed an infinite loop; but left a problem that find_get_pages() on shmem would return 0 (appearing to callers to mean end of tree) when it meets a run of nr_pages swap entries. The only uses of find_get_pages() on shmem are via pagevec_lookup(), called from invalidate_mapping_pages(), and from shmctl SHM_UNLOCK's scan_mapping_unevictable_pages(). The first is already commented, and not worth worrying about; but the second can leave pages on the Unevictable list after an unusual sequence of swapping and locking. Fix that by using shmem_find_get_pages_and_swap() (then ignoring the swap) instead of pagevec_lookup(). But I don't want to contaminate vmscan.c with shmem internals, nor shmem.c with LRU locking. So move scan_mapping_unevictable_pages() into shmem.c, renaming it shmem_unlock_mapping(); and rename check_move_unevictable_page() to check_move_unevictable_pages(), looping down an array of pages, oftentimes under the same lock. Leave out the "rotate unevictable list" block: that's a leftover from when this was used for /proc/sys/vm/scan_unevictable_pages, whose flawed handling involved looking at pages at tail of LRU. Was there significance to the sequence first ClearPageUnevictable, then test page_evictable, then SetPageUnevictable here? I think not, we're under LRU lock, and have no barriers between those. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michel Lespinasse <walken@google.com> Cc: <stable@vger.kernel.org> [back to 3.1 but will need respins] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-20 15:34:21 -07:00
extern void check_move_unevictable_pages(struct page **, int nr_pages);
extern int kswapd_run(int nid);
extern void kswapd_stop(int nid);
#ifdef CONFIG_SWAP
/* linux/mm/page_io.c */
extern int swap_readpage(struct page *);
extern int swap_writepage(struct page *page, struct writeback_control *wbc);
extern void end_swap_bio_write(struct bio *bio);
extern int __swap_writepage(struct page *page, struct writeback_control *wbc,
bio_end_io_t end_write_func);
mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages Currently swapfiles are managed entirely by the core VM by using ->bmap to allocate space and write to the blocks directly. This effectively ensures that the underlying blocks are allocated and avoids the need for the swap subsystem to locate what physical blocks store offsets within a file. If the swap subsystem is to use the filesystem information to locate the blocks, it is critical that information such as block groups, block bitmaps and the block descriptor table that map the swap file were resident in memory. This patch adds address_space_operations that the VM can call when activating or deactivating swap backed by a file. int swap_activate(struct file *); int swap_deactivate(struct file *); The ->swap_activate() method is used to communicate to the file that the VM relies on it, and the address_space should take adequate measures such as reserving space in the underlying device, reserving memory for mempools and pinning information such as the block descriptor table in memory. The ->swap_deactivate() method is called on sys_swapoff() if ->swap_activate() returned success. After a successful swapfile ->swap_activate, the swapfile is marked SWP_FILE and swapper_space.a_ops will proxy to sis->swap_file->f_mappings->a_ops using ->direct_io to write swapcache pages and ->readpage to read. It is perfectly possible that direct_IO be used to read the swap pages but it is an unnecessary complication. Similarly, it is possible that ->writepage be used instead of direct_io to write the pages but filesystem developers have stated that calling writepage from the VM is undesirable for a variety of reasons and using direct_IO opens up the possibility of writing back batches of swap pages in the future. [a.p.zijlstra@chello.nl: Original patch] Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: Eric B Munson <emunson@mgebm.net> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Neil Brown <neilb@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31 17:44:55 -06:00
extern int swap_set_page_dirty(struct page *page);
int add_swap_extent(struct swap_info_struct *sis, unsigned long start_page,
unsigned long nr_pages, sector_t start_block);
int generic_swapfile_activate(struct swap_info_struct *, struct file *,
sector_t *);
/* linux/mm/swap_state.c */
extern struct address_space swapper_spaces[];
#define swap_address_space(entry) (&swapper_spaces[swp_type(entry)])
extern unsigned long total_swapcache_pages(void);
extern void show_swap_cache_info(void);
extern int add_to_swap(struct page *, struct list_head *list);
extern int add_to_swap_cache(struct page *, swp_entry_t, gfp_t);
extern int __add_to_swap_cache(struct page *page, swp_entry_t entry);
extern void __delete_from_swap_cache(struct page *);
extern void delete_from_swap_cache(struct page *);
extern void free_page_and_swap_cache(struct page *);
extern void free_pages_and_swap_cache(struct page **, int);
extern struct page *lookup_swap_cache(swp_entry_t);
extern struct page *read_swap_cache_async(swp_entry_t, gfp_t,
struct vm_area_struct *vma, unsigned long addr);
extern struct page *__read_swap_cache_async(swp_entry_t, gfp_t,
struct vm_area_struct *vma, unsigned long addr,
bool *new_page_allocated);
extern struct page *swapin_readahead(swp_entry_t, gfp_t,
struct vm_area_struct *vma, unsigned long addr);
/* linux/mm/swapfile.c */
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 17:34:38 -07:00
extern atomic_long_t nr_swap_pages;
extern long total_swap_pages;
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 17:34:38 -07:00
/* Swap 50% full? Release swapcache more aggressively.. */
static inline bool vm_swap_full(void)
{
return atomic_long_read(&nr_swap_pages) * 2 < total_swap_pages;
}
static inline long get_nr_swap_pages(void)
{
return atomic_long_read(&nr_swap_pages);
}
extern void si_swapinfo(struct sysinfo *);
extern swp_entry_t get_swap_page(void);
extern swp_entry_t get_swap_page_of_type(int);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:58:46 -07:00
extern int add_swap_count_continuation(swp_entry_t, gfp_t);
extern void swap_shmem_alloc(swp_entry_t);
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:58:46 -07:00
extern int swap_duplicate(swp_entry_t);
extern int swapcache_prepare(swp_entry_t);
extern void swap_free(swp_entry_t);
mm: memcontrol: rewrite uncharge API The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:19:22 -06:00
extern void swapcache_free(swp_entry_t);
extern int free_swap_and_cache(swp_entry_t);
extern int swap_type_of(dev_t, sector_t, struct block_device **);
extern unsigned int count_swap_pages(int, int);
extern sector_t map_swap_page(struct page *, struct block_device **);
extern sector_t swapdev_block(int, pgoff_t);
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:06:38 -06:00
extern int page_swapcount(struct page *);
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 16:00:24 -06:00
extern int swp_swapcount(swp_entry_t entry);
extern struct swap_info_struct *page_swap_info(struct page *);
mm: thp: calculate the mapcount correctly for THP pages during WP faults This will provide fully accuracy to the mapcount calculation in the write protect faults, so page pinning will not get broken by false positive copy-on-writes. total_mapcount() isn't the right calculation needed in reuse_swap_page(), so this introduces a page_trans_huge_mapcount() that is effectively the full accurate return value for page_mapcount() if dealing with Transparent Hugepages, however we only use the page_trans_huge_mapcount() during COW faults where it strictly needed, due to its higher runtime cost. This also provide at practical zero cost the total_mapcount information which is needed to know if we can still relocate the page anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we can reuse the page no matter if it's a pte or a pmd_trans_huge triggering the fault, but we can only relocate the page anon_vma to the local vma->anon_vma if we're sure it's only this "vma" mapping the whole THP physical range. Kirill A. Shutemov discovered the problem with moving the page anon_vma to the local vma->anon_vma in a previous version of this patch and another problem in the way page_move_anon_rmap() was called. Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a previous version, because reuse_swap_page must be a macro to call page_trans_huge_mapcount from swap.h, so this uses a macro again instead of an inline function. With this change at least it's a less dangerous usage than it was before, because "page" is used only once now, while with the previous code reuse_swap_page(page++) would have called page_mapcount on page+1 and it would have increased page twice instead of just once. Dean Luick noticed an uninitialized variable that could result in a rmap inefficiency for the non-THP case in a previous version. Mike Marciniszyn said: : Our RDMA tests are seeing an issue with memory locking that bisects to : commit 61f5d698cc97 ("mm: re-enable THP") : : The test program registers two rather large MRs (512M) and RDMA : writes data to a passive peer using the first and RDMA reads it back : into the second MR and compares that data. The sizes are chosen randomly : between 0 and 1024 bytes. : : The test will get through a few (<= 4 iterations) and then gets a : compare error. : : Tracing indicates the kernel logical addresses associated with the individual : pages at registration ARE correct , the data in the "RDMA read response only" : packets ARE correct. : : The "corruption" occurs when the packet crosse two pages that are not physically : contiguous. The second page reads back as zero in the program. : : It looks like the user VA at the point of the compare error no longer points to : the same physical address as was registered. : : This patch totally resolves the issue! Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name> Reviewed-by: Dean Luick <dean.luick@intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Josh Collier <josh.d.collier@intel.com> Cc: Marc Haber <mh+linux-kernel@zugschlus.de> Cc: <stable@vger.kernel.org> [4.5] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-12 16:42:25 -06:00
extern bool reuse_swap_page(struct page *, int *);
mm: try_to_free_swap replaces remove_exclusive_swap_page remove_exclusive_swap_page(): its problem is in living up to its name. It doesn't matter if someone else has a reference to the page (raised page_count); it doesn't matter if the page is mapped into userspace (raised page_mapcount - though that hints it may be worth keeping the swap): all that matters is that there be no more references to the swap (and no writeback in progress). swapoff (try_to_unuse) has been removing pages from swapcache for years, with no concern for page count or page mapcount, and we used to have a comment in lookup_swap_cache() recognizing that: if you go for a page of swapcache, you'll get the right page, but it could have been removed from swapcache by the time you get page lock. So, give up asking for exclusivity: get rid of remove_exclusive_swap_page(), and remove_exclusive_swap_page_ref() and remove_exclusive_swap_page_count() which were spawned for the recent LRU work: replace them by the simpler try_to_free_swap() which just checks page_swapcount(). Similarly, remove the page_count limitation from free_swap_and_count(), but assume that it's worth holding on to the swap if page is mapped and swap nowhere near full. Add a vm_swap_full() test in free_swap_cache()? It would be consistent, but I think we probably have enough for now. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:39:36 -07:00
extern int try_to_free_swap(struct page *);
struct backing_dev_info;
#else /* CONFIG_SWAP */
#define swap_address_space(entry) (NULL)
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 17:34:38 -07:00
#define get_nr_swap_pages() 0L
#define total_swap_pages 0L
#define total_swapcache_pages() 0UL
swap: add per-partition lock for swapfile swap_lock is heavily contended when I test swap to 3 fast SSD (even slightly slower than swap to 2 such SSD). The main contention comes from swap_info_get(). This patch tries to fix the gap with adding a new per-partition lock. Global data like nr_swapfiles, total_swap_pages, least_priority and swap_list are still protected by swap_lock. nr_swap_pages is an atomic now, it can be changed without swap_lock. In theory, it's possible get_swap_page() finds no swap pages but actually there are free swap pages. But sounds not a big problem. Accessing partition specific data (like scan_swap_map and so on) is only protected by swap_info_struct.lock. Changing swap_info_struct.flags need hold swap_lock and swap_info_struct.lock, because scan_scan_map() will check it. read the flags is ok with either the locks hold. If both swap_lock and swap_info_struct.lock must be hold, we always hold the former first to avoid deadlock. swap_entry_free() can change swap_list. To delete that code, we add a new highest_priority_index. Whenever get_swap_page() is called, we check it. If it's valid, we use it. It's a pity get_swap_page() still holds swap_lock(). But in practice, swap_lock() isn't heavily contended in my test with this patch (or I can say there are other much more heavier bottlenecks like TLB flush). And BTW, looks get_swap_page() doesn't really need the lock. We never free swap_info[] and we check SWAP_WRITEOK flag. The only risk without the lock is we could swapout to some low priority swap, but we can quickly recover after several rounds of swap, so sounds not a big deal to me. But I'd prefer to fix this if it's a real problem. "swap: make each swap partition have one address_space" improved the swapout speed from 1.7G/s to 2G/s. This patch further improves the speed to 2.3G/s, so around 15% improvement. It's a multi-process test, so TLB flush isn't the biggest bottleneck before the patches. [arnd@arndb.de: fix it for nommu] [hughd@google.com: add missing unlock] [minchan@kernel.org: get rid of lockdep whinge on sys_swapon] Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 17:34:38 -07:00
#define vm_swap_full() 0
#define si_swapinfo(val) \
do { (val)->freeswap = (val)->totalswap = 0; } while (0)
/* only sparc can not include linux/pagemap.h in this file
* so leave put_page and release_pages undeclared... */
#define free_page_and_swap_cache(page) \
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 06:29:47 -06:00
put_page(page)
#define free_pages_and_swap_cache(pages, nr) \
release_pages((pages), (nr), false);
static inline void show_swap_cache_info(void)
{
}
#define free_swap_and_cache(swp) is_migration_entry(swp)
#define swapcache_prepare(swp) is_migration_entry(swp)
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:58:46 -07:00
static inline int add_swap_count_continuation(swp_entry_t swp, gfp_t gfp_mask)
{
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:58:46 -07:00
return 0;
}
static inline void swap_shmem_alloc(swp_entry_t swp)
{
}
swap_info: swap count continuations Swap is duplicated (reference count incremented by one) whenever the same swap page is inserted into another mm (when forking finds a swap entry in place of a pte, or when reclaim unmaps a pte to insert the swap entry). swap_info_struct's vmalloc'ed swap_map is the array of these reference counts: but what happens when the unsigned short (or unsigned char since the preceding patch) is full? (and its high bit is kept for a cache flag) We then lose track of it, never freeing, leaving it in use until swapoff: at which point we _hope_ that a single pass will have found all instances, assume there are no more, and will lose user data if we're wrong. Swapping of KSM pages has not yet been enabled; but it is implemented, and makes it very easy for a user to overflow the maximum swap count: possible with ordinary process pages, but unlikely, even when pid_max has been raised from PID_MAX_DEFAULT. This patch implements swap count continuations: when the count overflows, a continuation page is allocated and linked to the original vmalloc'ed map page, and this used to hold the continuation counts for that entry and its neighbours. These continuation pages are seldom referenced: the common paths all work on the original swap_map, only referring to a continuation page when the low "digit" of a count is incremented or decremented through SWAP_MAP_MAX. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14 18:58:46 -07:00
static inline int swap_duplicate(swp_entry_t swp)
{
return 0;
}
static inline void swap_free(swp_entry_t swp)
{
}
mm: memcontrol: rewrite uncharge API The memcg uncharging code that is involved towards the end of a page's lifetime - truncation, reclaim, swapout, migration - is impressively complicated and fragile. Because anonymous and file pages were always charged before they had their page->mapping established, uncharges had to happen when the page type could still be known from the context; as in unmap for anonymous, page cache removal for file and shmem pages, and swap cache truncation for swap pages. However, these operations happen well before the page is actually freed, and so a lot of synchronization is necessary: - Charging, uncharging, page migration, and charge migration all need to take a per-page bit spinlock as they could race with uncharging. - Swap cache truncation happens during both swap-in and swap-out, and possibly repeatedly before the page is actually freed. This means that the memcg swapout code is called from many contexts that make no sense and it has to figure out the direction from page state to make sure memory and memory+swap are always correctly charged. - On page migration, the old page might be unmapped but then reused, so memcg code has to prevent untimely uncharging in that case. Because this code - which should be a simple charge transfer - is so special-cased, it is not reusable for replace_page_cache(). But now that charged pages always have a page->mapping, introduce mem_cgroup_uncharge(), which is called after the final put_page(), when we know for sure that nobody is looking at the page anymore. For page migration, introduce mem_cgroup_migrate(), which is called after the migration is successful and the new page is fully rmapped. Because the old page is no longer uncharged after migration, prevent double charges by decoupling the page's memcg association (PCG_USED and pc->mem_cgroup) from the page holding an actual charge. The new bits PCG_MEM and PCG_MEMSW represent the respective charges and are transferred to the new page during migration. mem_cgroup_migrate() is suitable for replace_page_cache() as well, which gets rid of mem_cgroup_replace_page_cache(). However, care needs to be taken because both the source and the target page can already be charged and on the LRU when fuse is splicing: grab the page lock on the charge moving side to prevent changing pc->mem_cgroup of a page under migration. Also, the lruvecs of both pages change as we uncharge the old and charge the new during migration, and putback may race with us, so grab the lru lock and isolate the pages iff on LRU to prevent races and ensure the pages are on the right lruvec afterward. Swap accounting is massively simplified: because the page is no longer uncharged as early as swap cache deletion, a new mem_cgroup_swapout() can transfer the page's memory+swap charge (PCG_MEMSW) to the swap entry before the final put_page() in page reclaim. Finally, page_cgroup changes are now protected by whatever protection the page itself offers: anonymous pages are charged under the page table lock, whereas page cache insertions, swapin, and migration hold the page lock. Uncharging happens under full exclusion with no outstanding references. Charging and uncharging also ensure that the page is off-LRU, which serializes against charge migration. Remove the very costly page_cgroup lock and set pc->flags non-atomically. [mhocko@suse.cz: mem_cgroup_charge_statistics needs preempt_disable] [vdavydov@parallels.com: fix flags definition] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vladimir Davydov <vdavydov@parallels.com> Tested-by: Jet Chen <jet.chen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:19:22 -06:00
static inline void swapcache_free(swp_entry_t swp)
{
}
static inline struct page *swapin_readahead(swp_entry_t swp, gfp_t gfp_mask,
struct vm_area_struct *vma, unsigned long addr)
{
return NULL;
}
shmem: writepage directly to swap Synopsis: if shmem_writepage calls swap_writepage directly, most shmem swap loads benefit, and a catastrophic interaction between SLUB and some flash storage is avoided. shmem_writepage() has always been peculiar in making no attempt to write: it has just transferred a shmem page from file cache to swap cache, then let that page make its way around the LRU again before being written and freed. The idea was that people use tmpfs because they want those pages to stay in RAM; so although we give it an overflow to swap, we should resist writing too soon, giving those pages a second chance before they can be reclaimed. That was always questionable, and I've toyed with this patch for years; but never had a clear justification to depart from the original design. It became more questionable in 2.6.28, when the split LRU patches classed shmem and tmpfs pages as SwapBacked rather than as file_cache: that in itself gives them more resistance to reclaim than normal file pages. I prepared this patch for 2.6.29, but the merge window arrived before I'd completed gathering statistics to justify sending it in. Then while comparing SLQB against SLUB, running SLUB on a laptop I'd habitually used with SLAB, I found SLUB to run my tmpfs kbuild swapping tests five times slower than SLAB or SLQB - other machines slower too, but nowhere near so bad. Simpler "cp -a" swapping tests showed the same. slub_max_order=0 brings sanity to all, but heavy swapping is too far from normal to justify such a tuning. The crucial factor on that laptop turns out to be that I'm using an SD card for swap. What happens is this: By default, SLUB uses order-2 pages for shmem_inode_cache (and many other fs inodes), so creating tmpfs files under memory pressure brings lumpy reclaim into play. One subpage of the order is chosen from the bottom of the LRU as usual, then the other three picked out from their random positions on the LRUs. In a tmpfs load, many of these pages will be ones which already passed through shmem_writepage, so already have swap allocated. And though their offsets on swap were probably allocated sequentially, now that the pages are picked off at random, their swap offsets are scattered. But the flash storage on the SD card is very sensitive to having its writes merged: once swap is written at scattered offsets, performance falls apart. Rotating disk seeks increase too, but less disastrously. So: stop giving shmem/tmpfs pages a second pass around the LRU, write them out to swap as soon as their swap has been allocated. It's surely possible to devise an artificial load which runs faster the old way, one whose sizing is such that the tmpfs pages on their second pass are the ones that are wanted again, and other pages not. But I've not yet found such a load: on all machines, under the loads I've tried, immediate swap_writepage speeds up shmem swapping: especially when using the SLUB allocator (and more effectively than slub_max_order=0), but also with the others; and it also reduces the variance between runs. How much faster varies widely: a factor of five is rare, 5% is common. One load which might have suffered: imagine a swapping shmem load in a limited mem_cgroup on a machine with plenty of memory. Before 2.6.29 the swapcache was not charged, and such a load would have run quickest with the shmem swapcache never written to swap. But now swapcache is charged, so even this load benefits from shmem_writepage directly to swap. Apologies for the #ifndef CONFIG_SWAP swap_writepage() stub in swap.h: it's silly because that will never get called; but refactoring shmem.c sensibly according to CONFIG_SWAP will be a separate task. Signed-off-by: Hugh Dickins <hugh@veritas.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-31 16:23:33 -06:00
static inline int swap_writepage(struct page *p, struct writeback_control *wbc)
{
return 0;
}
static inline struct page *lookup_swap_cache(swp_entry_t swp)
{
return NULL;
}
static inline int add_to_swap(struct page *page, struct list_head *list)
{
return 0;
}
static inline int add_to_swap_cache(struct page *page, swp_entry_t entry,
gfp_t gfp_mask)
{
return -1;
}
static inline void __delete_from_swap_cache(struct page *page)
{
}
static inline void delete_from_swap_cache(struct page *page)
{
}
shmem: replace page if mapping excludes its zone The GMA500 GPU driver uses GEM shmem objects, but with a new twist: the backing RAM has to be below 4GB. Not a problem while the boards supported only 4GB: but now Intel's D2700MUD boards support 8GB, and their GMA3600 is managed by the GMA500 driver. shmem/tmpfs has never pretended to support hardware restrictions on the backing memory, but it might have appeared to do so before v3.1, and even now it works fine until a page is swapped out then back in. When read_cache_page_gfp() supplied a freshly allocated page for copy, that compensated for whatever choice might have been made by earlier swapin readahead; but swapoff was likely to destroy the illusion. We'd like to continue to support GMA500, so now add a new shmem_should_replace_page() check on the zone when about to move a page from swapcache to filecache (in swapin and swapoff cases), with shmem_replace_page() to allocate and substitute a suitable page (given gma500/gem.c's mapping_set_gfp_mask GFP_KERNEL | __GFP_DMA32). This does involve a minor extension to mem_cgroup_replace_page_cache() (the page may or may not have already been charged); and I've removed a comment and call to mem_cgroup_uncharge_cache_page(), which in fact is always a no-op while PageSwapCache. Also removed optimization of an unlikely path in shmem_getpage_gfp(), now that we need to check PageSwapCache more carefully (a racing caller might already have made the copy). And at one point shmem_unuse_inode() needs to use the hitherto private page_swapcount(), to guard against racing with inode eviction. It would make sense to extend shmem_should_replace_page(), to cover cpuset and NUMA mempolicy restrictions too, but set that aside for now: needs a cleanup of shmem mempolicy handling, and more testing, and ought to handle swap faults in do_swap_page() as well as shmem. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephane Marchesin <marcheu@chromium.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:06:38 -06:00
static inline int page_swapcount(struct page *page)
{
return 0;
}
mm: /proc/pid/smaps:: show proportional swap share of the mapping We want to know per-process workingset size for smart memory management on userland and we use swap(ex, zram) heavily to maximize memory efficiency so workingset includes swap as well as RSS. On such system, if there are lots of shared anonymous pages, it's really hard to figure out exactly how many each process consumes memory(ie, rss + wap) if the system has lots of shared anonymous memory(e.g, android). This patch introduces SwapPss field on /proc/<pid>/smaps so we can get more exact workingset size per process. Bongkyu tested it. Result is below. 1. 50M used swap SwapTotal: 461976 kB SwapFree: 411192 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 48236 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 141184 2. 240M used swap SwapTotal: 461976 kB SwapFree: 216808 kB $ adb shell cat /proc/*/smaps | grep "SwapPss:" | awk '{sum += $2} END {print sum}'; 230315 $ adb shell cat /proc/*/smaps | grep "Swap:" | awk '{sum += $2} END {print sum}'; 1387744 [akpm@linux-foundation.org: simplify kunmap_atomic() call] Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Bongkyu Kim <bongkyu.kim@lge.com> Tested-by: Bongkyu Kim <bongkyu.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08 16:00:24 -06:00
static inline int swp_swapcount(swp_entry_t entry)
{
return 0;
}
mm: thp: calculate the mapcount correctly for THP pages during WP faults This will provide fully accuracy to the mapcount calculation in the write protect faults, so page pinning will not get broken by false positive copy-on-writes. total_mapcount() isn't the right calculation needed in reuse_swap_page(), so this introduces a page_trans_huge_mapcount() that is effectively the full accurate return value for page_mapcount() if dealing with Transparent Hugepages, however we only use the page_trans_huge_mapcount() during COW faults where it strictly needed, due to its higher runtime cost. This also provide at practical zero cost the total_mapcount information which is needed to know if we can still relocate the page anon_vma to the local vma. If page_trans_huge_mapcount() returns 1 we can reuse the page no matter if it's a pte or a pmd_trans_huge triggering the fault, but we can only relocate the page anon_vma to the local vma->anon_vma if we're sure it's only this "vma" mapping the whole THP physical range. Kirill A. Shutemov discovered the problem with moving the page anon_vma to the local vma->anon_vma in a previous version of this patch and another problem in the way page_move_anon_rmap() was called. Andrew Morton discovered that CONFIG_SWAP=n wouldn't build in a previous version, because reuse_swap_page must be a macro to call page_trans_huge_mapcount from swap.h, so this uses a macro again instead of an inline function. With this change at least it's a less dangerous usage than it was before, because "page" is used only once now, while with the previous code reuse_swap_page(page++) would have called page_mapcount on page+1 and it would have increased page twice instead of just once. Dean Luick noticed an uninitialized variable that could result in a rmap inefficiency for the non-THP case in a previous version. Mike Marciniszyn said: : Our RDMA tests are seeing an issue with memory locking that bisects to : commit 61f5d698cc97 ("mm: re-enable THP") : : The test program registers two rather large MRs (512M) and RDMA : writes data to a passive peer using the first and RDMA reads it back : into the second MR and compares that data. The sizes are chosen randomly : between 0 and 1024 bytes. : : The test will get through a few (<= 4 iterations) and then gets a : compare error. : : Tracing indicates the kernel logical addresses associated with the individual : pages at registration ARE correct , the data in the "RDMA read response only" : packets ARE correct. : : The "corruption" occurs when the packet crosse two pages that are not physically : contiguous. The second page reads back as zero in the program. : : It looks like the user VA at the point of the compare error no longer points to : the same physical address as was registered. : : This patch totally resolves the issue! Link: http://lkml.kernel.org/r/1462547040-1737-2-git-send-email-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: "Kirill A. Shutemov" <kirill@shutemov.name> Reviewed-by: Dean Luick <dean.luick@intel.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Tested-by: Josh Collier <josh.d.collier@intel.com> Cc: Marc Haber <mh+linux-kernel@zugschlus.de> Cc: <stable@vger.kernel.org> [4.5] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-12 16:42:25 -06:00
#define reuse_swap_page(page, total_mapcount) \
(page_trans_huge_mapcount(page, total_mapcount) == 1)
mm: try_to_free_swap replaces remove_exclusive_swap_page remove_exclusive_swap_page(): its problem is in living up to its name. It doesn't matter if someone else has a reference to the page (raised page_count); it doesn't matter if the page is mapped into userspace (raised page_mapcount - though that hints it may be worth keeping the swap): all that matters is that there be no more references to the swap (and no writeback in progress). swapoff (try_to_unuse) has been removing pages from swapcache for years, with no concern for page count or page mapcount, and we used to have a comment in lookup_swap_cache() recognizing that: if you go for a page of swapcache, you'll get the right page, but it could have been removed from swapcache by the time you get page lock. So, give up asking for exclusivity: get rid of remove_exclusive_swap_page(), and remove_exclusive_swap_page_ref() and remove_exclusive_swap_page_count() which were spawned for the recent LRU work: replace them by the simpler try_to_free_swap() which just checks page_swapcount(). Similarly, remove the page_count limitation from free_swap_and_count(), but assume that it's worth holding on to the swap if page is mapped and swap nowhere near full. Add a vm_swap_full() test in free_swap_cache()? It would be consistent, but I think we probably have enough for now. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Rik van Riel <riel@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:39:36 -07:00
static inline int try_to_free_swap(struct page *page)
{
return 0;
}
static inline swp_entry_t get_swap_page(void)
{
swp_entry_t entry;
entry.val = 0;
return entry;
}
#endif /* CONFIG_SWAP */
#ifdef CONFIG_MEMCG
static inline int mem_cgroup_swappiness(struct mem_cgroup *memcg)
{
/* Cgroup2 doesn't have per-cgroup swappiness */
if (cgroup_subsys_on_dfl(memory_cgrp_subsys))
return vm_swappiness;
/* root ? */
if (mem_cgroup_disabled() || !memcg->css.parent)
return vm_swappiness;
return memcg->swappiness;
}
#else
static inline int mem_cgroup_swappiness(struct mem_cgroup *mem)
{
return vm_swappiness;
}
#endif
#ifdef CONFIG_MEMCG_SWAP
extern void mem_cgroup_swapout(struct page *page, swp_entry_t entry);
extern int mem_cgroup_try_charge_swap(struct page *page, swp_entry_t entry);
extern void mem_cgroup_uncharge_swap(swp_entry_t entry);
extern long mem_cgroup_get_nr_swap_pages(struct mem_cgroup *memcg);
extern bool mem_cgroup_swap_full(struct page *page);
#else
static inline void mem_cgroup_swapout(struct page *page, swp_entry_t entry)
{
}
static inline int mem_cgroup_try_charge_swap(struct page *page,
swp_entry_t entry)
{
return 0;
}
static inline void mem_cgroup_uncharge_swap(swp_entry_t entry)
{
}
static inline long mem_cgroup_get_nr_swap_pages(struct mem_cgroup *memcg)
{
return get_nr_swap_pages();
}
static inline bool mem_cgroup_swap_full(struct page *page)
{
return vm_swap_full();
}
#endif
#endif /* __KERNEL__*/
#endif /* _LINUX_SWAP_H */