alistair23-linux/include/uapi/rdma/mlx4-abi.h

192 lines
5 KiB
C
Raw Normal View History

License cleanup: add SPDX license identifier to uapi header files with a license Many user space API headers have licensing information, which is either incomplete, badly formatted or just a shorthand for referring to the license under which the file is supposed to be. This makes it hard for compliance tools to determine the correct license. Update these files with an SPDX license identifier. The identifier was chosen based on the license information in the file. GPL/LGPL licensed headers get the matching GPL/LGPL SPDX license identifier with the added 'WITH Linux-syscall-note' exception, which is the officially assigned exception identifier for the kernel syscall exception: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". This exception makes it possible to include GPL headers into non GPL code, without confusing license compliance tools. Headers which have either explicit dual licensing or are just licensed under a non GPL license are updated with the corresponding SPDX identifier and the GPLv2 with syscall exception identifier. The format is: ((GPL-2.0 WITH Linux-syscall-note) OR SPDX-ID-OF-OTHER-LICENSE) SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. The update does not remove existing license information as this has to be done on a case by case basis and the copyright holders might have to be consulted. This will happen in a separate step. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 08:09:13 -06:00
/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */
/*
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef MLX4_ABI_USER_H
#define MLX4_ABI_USER_H
#include <linux/types.h>
/*
* Increment this value if any changes that break userspace ABI
* compatibility are made.
*/
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
#define MLX4_IB_UVERBS_NO_DEV_CAPS_ABI_VERSION 3
#define MLX4_IB_UVERBS_ABI_VERSION 4
/*
* Make sure that all structs defined in this file remain laid out so
* that they pack the same way on 32-bit and 64-bit architectures (to
* avoid incompatibility between 32-bit userspace and 64-bit kernels).
* In particular do not use pointer types -- pass pointers in __u64
* instead.
*/
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
struct mlx4_ib_alloc_ucontext_resp_v3 {
__u32 qp_tab_size;
__u16 bf_reg_size;
__u16 bf_regs_per_page;
};
enum {
MLX4_USER_DEV_CAP_LARGE_CQE = 1L << 0,
};
struct mlx4_ib_alloc_ucontext_resp {
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
__u32 dev_caps;
__u32 qp_tab_size;
__u16 bf_reg_size;
__u16 bf_regs_per_page;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
__u32 cqe_size;
};
struct mlx4_ib_alloc_pd_resp {
__u32 pdn;
__u32 reserved;
};
struct mlx4_ib_create_cq {
__aligned_u64 buf_addr;
__aligned_u64 db_addr;
};
struct mlx4_ib_create_cq_resp {
__u32 cqn;
__u32 reserved;
};
struct mlx4_ib_resize_cq {
__aligned_u64 buf_addr;
};
struct mlx4_ib_create_srq {
__aligned_u64 buf_addr;
__aligned_u64 db_addr;
};
struct mlx4_ib_create_srq_resp {
__u32 srqn;
__u32 reserved;
};
struct mlx4_ib_create_qp_rss {
__aligned_u64 rx_hash_fields_mask; /* Use enum mlx4_ib_rx_hash_fields */
__u8 rx_hash_function; /* Use enum mlx4_ib_rx_hash_function_flags */
__u8 reserved[7];
__u8 rx_hash_key[40];
__u32 comp_mask;
__u32 reserved1;
};
struct mlx4_ib_create_qp {
__aligned_u64 buf_addr;
__aligned_u64 db_addr;
__u8 log_sq_bb_count;
__u8 log_sq_stride;
__u8 sq_no_prefetch;
__u8 reserved;
__u32 inl_recv_sz;
};
struct mlx4_ib_create_wq {
__aligned_u64 buf_addr;
__aligned_u64 db_addr;
__u8 log_range_size;
__u8 reserved[3];
__u32 comp_mask;
};
struct mlx4_ib_modify_wq {
__u32 comp_mask;
__u32 reserved;
};
struct mlx4_ib_create_rwq_ind_tbl_resp {
__u32 response_length;
__u32 reserved;
};
/* RX Hash function flags */
enum mlx4_ib_rx_hash_function_flags {
MLX4_IB_RX_HASH_FUNC_TOEPLITZ = 1 << 0,
};
/*
* RX Hash flags, these flags allows to set which incoming packet's field should
* participates in RX Hash. Each flag represent certain packet's field,
* when the flag is set the field that is represented by the flag will
* participate in RX Hash calculation.
*/
enum mlx4_ib_rx_hash_fields {
MLX4_IB_RX_HASH_SRC_IPV4 = 1 << 0,
MLX4_IB_RX_HASH_DST_IPV4 = 1 << 1,
MLX4_IB_RX_HASH_SRC_IPV6 = 1 << 2,
MLX4_IB_RX_HASH_DST_IPV6 = 1 << 3,
MLX4_IB_RX_HASH_SRC_PORT_TCP = 1 << 4,
MLX4_IB_RX_HASH_DST_PORT_TCP = 1 << 5,
MLX4_IB_RX_HASH_SRC_PORT_UDP = 1 << 6,
MLX4_IB_RX_HASH_DST_PORT_UDP = 1 << 7,
MLX4_IB_RX_HASH_INNER = 1ULL << 31,
};
struct mlx4_ib_rss_caps {
__aligned_u64 rx_hash_fields_mask; /* enum mlx4_ib_rx_hash_fields */
__u8 rx_hash_function; /* enum mlx4_ib_rx_hash_function_flags */
__u8 reserved[7];
};
enum query_device_resp_mask {
MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET = 1UL << 0,
};
struct mlx4_ib_tso_caps {
__u32 max_tso; /* Maximum tso payload size in bytes */
/* Corresponding bit will be set if qp type from
* 'enum ib_qp_type' is supported.
*/
__u32 supported_qpts;
};
struct mlx4_uverbs_ex_query_device_resp {
__u32 comp_mask;
__u32 response_length;
__aligned_u64 hca_core_clock_offset;
__u32 max_inl_recv_sz;
__u32 reserved;
struct mlx4_ib_rss_caps rss_caps;
struct mlx4_ib_tso_caps tso_caps;
};
#endif /* MLX4_ABI_USER_H */