alistair23-linux/arch/tile/lib/atomic_32.c

207 lines
5.9 KiB
C
Raw Normal View History

/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#include <linux/cache.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/atomic.h>
#include <arch/chip.h>
/* This page is remapped on startup to be hash-for-home. */
int atomic_locks[PAGE_SIZE / sizeof(int)] __page_aligned_bss;
int *__atomic_hashed_lock(volatile void *v)
{
/* NOTE: this code must match "sys_cmpxchg" in kernel/intvec_32.S */
/*
* Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index.
* Using mm works here because atomic_locks is page aligned.
*/
unsigned long ptr = __insn_mm((unsigned long)v >> 1,
(unsigned long)atomic_locks,
2, (ATOMIC_HASH_SHIFT + 2) - 1);
return (int *)ptr;
}
#ifdef CONFIG_SMP
/* Return whether the passed pointer is a valid atomic lock pointer. */
static int is_atomic_lock(int *p)
{
return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE];
}
void __atomic_fault_unlock(int *irqlock_word)
{
BUG_ON(!is_atomic_lock(irqlock_word));
BUG_ON(*irqlock_word != 1);
*irqlock_word = 0;
}
#endif /* CONFIG_SMP */
static inline int *__atomic_setup(volatile void *v)
{
/* Issue a load to the target to bring it into cache. */
*(volatile int *)v;
return __atomic_hashed_lock(v);
}
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
int _atomic_xchg(int *v, int n)
{
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic_xchg(v, __atomic_setup(v), n).val;
}
EXPORT_SYMBOL(_atomic_xchg);
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
int _atomic_xchg_add(int *v, int i)
{
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic_xchg_add(v, __atomic_setup(v), i).val;
}
EXPORT_SYMBOL(_atomic_xchg_add);
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
int _atomic_xchg_add_unless(int *v, int a, int u)
{
/*
* Note: argument order is switched here since it is easier
* to use the first argument consistently as the "old value"
* in the assembly, as is done for _atomic_cmpxchg().
*/
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic_xchg_add_unless(v, __atomic_setup(v), u, a).val;
}
EXPORT_SYMBOL(_atomic_xchg_add_unless);
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
int _atomic_cmpxchg(int *v, int o, int n)
{
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic_cmpxchg(v, __atomic_setup(v), o, n).val;
}
EXPORT_SYMBOL(_atomic_cmpxchg);
unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask)
{
return __atomic_or((int *)p, __atomic_setup(p), mask).val;
}
EXPORT_SYMBOL(_atomic_or);
unsigned long _atomic_and(volatile unsigned long *p, unsigned long mask)
{
return __atomic_and((int *)p, __atomic_setup(p), mask).val;
}
EXPORT_SYMBOL(_atomic_and);
unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask)
{
return __atomic_andn((int *)p, __atomic_setup(p), mask).val;
}
EXPORT_SYMBOL(_atomic_andn);
unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask)
{
return __atomic_xor((int *)p, __atomic_setup(p), mask).val;
}
EXPORT_SYMBOL(_atomic_xor);
long long _atomic64_xchg(long long *v, long long n)
{
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic64_xchg(v, __atomic_setup(v), n);
}
EXPORT_SYMBOL(_atomic64_xchg);
long long _atomic64_xchg_add(long long *v, long long i)
{
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic64_xchg_add(v, __atomic_setup(v), i);
}
EXPORT_SYMBOL(_atomic64_xchg_add);
long long _atomic64_xchg_add_unless(long long *v, long long a, long long u)
{
/*
* Note: argument order is switched here since it is easier
* to use the first argument consistently as the "old value"
* in the assembly, as is done for _atomic_cmpxchg().
*/
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic64_xchg_add_unless(v, __atomic_setup(v), u, a);
}
EXPORT_SYMBOL(_atomic64_xchg_add_unless);
long long _atomic64_cmpxchg(long long *v, long long o, long long n)
{
tile: rework <asm/cmpxchg.h> The macrology in cmpxchg.h was designed to allow arbitrary pointer and integer values to be passed through the routines. To support cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we used the idiom "(typeof(val))(typeof(val-val))". This way, in the "size 8" branch of the switch, when the underlying cmpxchg routine returns a 64-bit quantity, we cast it first to a typeof(val-val) quantity (i.e. size_t if "val" is a pointer) with no warnings about casting between pointers and integers of different sizes, then cast onwards to typeof(val), again with no warnings. If val is not a pointer type, the additional cast is a no-op. We can't replace the typeof(val-val) cast with (for example) unsigned long, since then if "val" is really a 64-bit type, we cast away the high bits. HOWEVER, this fails with current gcc (through 4.7 at least) if "val" is a pointer to an incomplete type. Unfortunately gcc isn't smart enough to realize that "val - val" will always be a size_t type even if it's an incomplete type pointer. Accordingly, I've reworked the way we handle the casting. We have given up the ability to use cmpxchg() on 64-bit values on tilepro, which is OK in the kernel since we should use cmpxchg64() explicitly on such values anyway. As a result, I can just use simple "unsigned long" casts internally. As I reworked it, I realized it would be cleaner to move the architecture-specific conditionals for cmpxchg and xchg out of the atomic.h headers and into cmpxchg, and then use the cmpxchg() and xchg() primitives directly in atomic.h and elsewhere. This allowed the cmpxchg.h header to stand on its own without relying on the implicit include of it that is performed by <asm/atomic.h>. It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines from atomic_{32,64}.h into atomic.h. I improved the tests that guard the allowed size of the arguments to the routines to use a __compiletime_error() test. (By avoiding the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as well and use the macros there, which is otherwise impossible due to include order dependency issues.) The tilepro _atomic_xxx internal methods were previously set up to take atomic_t and atomic64_t arguments, which isn't as convenient with the new model, so I modified them to take int or u64 arguments, which is consistent with how they used the arguments internally anyway, so provided some nice simplification there too. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 06:56:45 -06:00
return __atomic64_cmpxchg(v, __atomic_setup(v), o, n);
}
EXPORT_SYMBOL(_atomic64_cmpxchg);
long long _atomic64_and(long long *v, long long n)
{
return __atomic64_and(v, __atomic_setup(v), n);
}
EXPORT_SYMBOL(_atomic64_and);
long long _atomic64_or(long long *v, long long n)
{
return __atomic64_or(v, __atomic_setup(v), n);
}
EXPORT_SYMBOL(_atomic64_or);
long long _atomic64_xor(long long *v, long long n)
{
return __atomic64_xor(v, __atomic_setup(v), n);
}
EXPORT_SYMBOL(_atomic64_xor);
/*
* If any of the atomic or futex routines hit a bad address (not in
* the page tables at kernel PL) this routine is called. The futex
* routines are never used on kernel space, and the normal atomics and
* bitops are never used on user space. So a fault on kernel space
* must be fatal, but a fault on userspace is a futex fault and we
* need to return -EFAULT. Note that the context this routine is
* invoked in is the context of the "_atomic_xxx()" routines called
* by the functions in this file.
*/
struct __get_user __atomic_bad_address(int __user *addr)
{
if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int))))
panic("Bad address used for kernel atomic op: %p\n", addr);
return (struct __get_user) { .err = -EFAULT };
}
void __init __init_atomic_per_cpu(void)
{
/* Validate power-of-two and "bigger than cpus" assumption */
BUILD_BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1));
BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids);
/*
* On TILEPro we prefer to use a single hash-for-home
* page, since this means atomic operations are less
* likely to encounter a TLB fault and thus should
* in general perform faster. You may wish to disable
* this in situations where few hash-for-home tiles
* are configured.
*/
BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0);
/* The locks must all fit on one page. */
BUILD_BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE);
/*
* We use the page offset of the atomic value's address as
* an index into atomic_locks, excluding the low 3 bits.
* That should not produce more indices than ATOMIC_HASH_SIZE.
*/
BUILD_BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
}