alistair23-linux/drivers/acpi/acpica/nsload.c

341 lines
10 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: nsload - namespace loading/expanding/contracting procedures
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2017, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#include "acdispat.h"
#include "actables.h"
ACPICA: Namespace: Fix dynamic table loading issues ACPICA commit 767ee53354e0c4b7e8e7c57c6dd7bf569f0d52bb There are issues related to the namespace/interpreter locks, which causes several ACPI functionalities not specification compliant. The lock issues were detectec when we were trying to fix the functionalities (please see Link # [1] for the details). What's the lock issues? Let's first look into the namespace/interpreter lock usages inside of the object evaluation and the table loading which are the key AML interpretion code paths: Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse(LOAD_PASS1/LOAD_PASS2) acpi_ds_load1_begion_op acpi_ds_load1_end_op acpi_ds_load2_begion_op acpi_ds_load2_end_op U(Namespace) Object evaluation: acpi_ns_evaluate L(Interpreter) acpi_ps_execute_method acpi_ds_exec_begin_op acpi_ds_exec_end_op U(Interpreter) acpi_ns_load_table L(Namespace) U(Namespace) acpi_ev_initialize_region L(Namespace) U(Namespace) address_space.Setup address_space.Handler acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep L(Interpreter) U(Interpreter) L(Interpreter) acpi_ex_resolve_node_to_value U(Interpreter) acpi_ns_check_return_value Where: 1. L(Interpreter) means acquire(MTX_INTERPRETER); 2. U(Interpreter) means release(MTX_INTERPRETER); 3. L(Namespace) means acquire(MTX_NAMESPACE); 4. U(Namespace) means release(MTX_NAMESPACE); We can see that acpi_ns_exec_module_code() (which invokes acpi_ns_evaluate) is implemented in a deferred way just in order to avoid to reacquire the namespace lock. This is in fact the root cause of many other ACPICA issues: 1. We now know for sure that the module code should be executed right in place by the Windows AML interpreter. So in the current design, if the region initializations/accesses or the table loadings (where the namespace surely should be locked again) happening during the table loading period, dead lock could happen because ACPICA never unlocks the namespace during the AML interpretion. 2. ACPICA interpreter just ensures that all static namespace nodes (named objects created during the acpi_load_tables()) are created (acpi_ns_lookup()) with the correct lock held, but doesn't ensure that the named objects created by the control method are created with the same correct lock held. It requires the control methods to be executed in a serial way after "loading a table", that's why ACPICA requires method auto serialization. This patch fixes these software design issues by extending interpreter enter/exit APIs to hold both interpreter/namespace locks to ensure the lock order correctness, so that we can get these code paths: Table loading: acpi_ns_load_table E(Interpreter) acpi_ns_parse_table acpi_ns_one_complete_parse acpi_ns_execute_table X(Interpreter) acpi_ns_load_table acpi_ev_initialize_region address_space.Setup address_space.Handler acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep E(Interpreter) X(Interpreter) Object evaluation: acpi_ns_evaluate E(Interpreter) acpi_ps_execute_method X(Interpreter) acpi_ns_load_table acpi_ev_initialize_region address_space.Setup address_space.Handler acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep E(Interpreter) X(Interpreter) Where: 1. E(Interpreter) means acquire(MTX_INTERPRETER, MTX_NAMESPACE); 2. X(Interpreter) means release(MTX_NAMESPACE, MTX_INTERPRETER); After this change, we can see: 1. All namespace nodes creations are locked by the namespace lock. 2. All namespace nodes referencing are locked with the same lock. 3. But we also can notice a defact that, all namespace nodes deletions could be affected by this change. As a consequence, acpi_ns_delete_namespace_subtree() may delete a static namespace node that is still referenced by the interpreter (for example, the parser scopes). Currently, we needn't worry about the last defact because in ACPICA, table unloading is not fully functioning, its design strictly relies on the fact that when the namespace deletion happens, either the AML table or the OSPMs should have been notified and thus either the AML table or the OSPMs shouldn't reference deletion-related namespace nodes during the namespace deletion. And this change still works with the above restrictions applied. While making this a-step-forward helps us to correct the wrong grammar to pull many things back to the correct rail. And pulling things back to the correct rail in return makes it possible for us to support fully functioning table unloading after doing many cleanups. While this patch is generated, all namespace locks are examined to ensure that they can meet either of the following pattens: 1. L(Namespace) U(Namespace) 2. E(Interpreter) X(Interpreter) 3. E(Interpreter) X(Interpreter) L(Namespace) U(Namespace) E(Interpreter) X(Interpreter) We ensure this by adding X(Interpreter)/E(Interpreter) or removing U(Namespace)/L(Namespace) for those currently are executed in the following order: E(Interpreter) L(Namespace) U(Namespace) X(Interpreter) And adding E(Interpreter)/X(Interpreter) for those currently are executed in the following order: X(Interpreter) E(Interpreter) Originally, the interpreter lock is held for the execution AML opcodes, the namespace lock is held for the named object creation AML opcodes. Since they are actually same in MS interpreter (can all be executed during the table loading), we can combine the 2 locks and tune the locking code better in this way. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701 # [1] Link: https://bugs.acpica.org/show_bug.cgi?id=1323 Link: https://github.com/acpica/acpica/commit/767ee533 Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-and-tested-by: Greg White <gwhite@kupulau.com> Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-07 00:07:10 -06:00
#include "acinterp.h"
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsload")
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 20:49:35 -06:00
/* Local prototypes */
#ifdef ACPI_FUTURE_IMPLEMENTATION
acpi_status acpi_ns_unload_namespace(acpi_handle handle);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 20:49:35 -06:00
static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 20:49:35 -06:00
#endif
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 20:49:35 -06:00
#ifndef ACPI_NO_METHOD_EXECUTION
/*******************************************************************************
*
* FUNCTION: acpi_ns_load_table
*
* PARAMETERS: table_index - Index for table to be loaded
* node - Owning NS node
*
* RETURN: Status
*
* DESCRIPTION: Load one ACPI table into the namespace
*
******************************************************************************/
acpi_status
acpi_ns_load_table(u32 table_index, struct acpi_namespace_node *node)
{
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
ACPI_FUNCTION_TRACE(ns_load_table);
/* If table already loaded into namespace, just return */
if (acpi_tb_is_table_loaded(table_index)) {
status = AE_ALREADY_EXISTS;
goto unlock;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"**** Loading table into namespace ****\n"));
status = acpi_tb_allocate_owner_id(table_index);
if (ACPI_FAILURE(status)) {
goto unlock;
}
ACPICA: Namespace: Fix dynamic table loading issues ACPICA commit 767ee53354e0c4b7e8e7c57c6dd7bf569f0d52bb There are issues related to the namespace/interpreter locks, which causes several ACPI functionalities not specification compliant. The lock issues were detectec when we were trying to fix the functionalities (please see Link # [1] for the details). What's the lock issues? Let's first look into the namespace/interpreter lock usages inside of the object evaluation and the table loading which are the key AML interpretion code paths: Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse(LOAD_PASS1/LOAD_PASS2) acpi_ds_load1_begion_op acpi_ds_load1_end_op acpi_ds_load2_begion_op acpi_ds_load2_end_op U(Namespace) Object evaluation: acpi_ns_evaluate L(Interpreter) acpi_ps_execute_method acpi_ds_exec_begin_op acpi_ds_exec_end_op U(Interpreter) acpi_ns_load_table L(Namespace) U(Namespace) acpi_ev_initialize_region L(Namespace) U(Namespace) address_space.Setup address_space.Handler acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep L(Interpreter) U(Interpreter) L(Interpreter) acpi_ex_resolve_node_to_value U(Interpreter) acpi_ns_check_return_value Where: 1. L(Interpreter) means acquire(MTX_INTERPRETER); 2. U(Interpreter) means release(MTX_INTERPRETER); 3. L(Namespace) means acquire(MTX_NAMESPACE); 4. U(Namespace) means release(MTX_NAMESPACE); We can see that acpi_ns_exec_module_code() (which invokes acpi_ns_evaluate) is implemented in a deferred way just in order to avoid to reacquire the namespace lock. This is in fact the root cause of many other ACPICA issues: 1. We now know for sure that the module code should be executed right in place by the Windows AML interpreter. So in the current design, if the region initializations/accesses or the table loadings (where the namespace surely should be locked again) happening during the table loading period, dead lock could happen because ACPICA never unlocks the namespace during the AML interpretion. 2. ACPICA interpreter just ensures that all static namespace nodes (named objects created during the acpi_load_tables()) are created (acpi_ns_lookup()) with the correct lock held, but doesn't ensure that the named objects created by the control method are created with the same correct lock held. It requires the control methods to be executed in a serial way after "loading a table", that's why ACPICA requires method auto serialization. This patch fixes these software design issues by extending interpreter enter/exit APIs to hold both interpreter/namespace locks to ensure the lock order correctness, so that we can get these code paths: Table loading: acpi_ns_load_table E(Interpreter) acpi_ns_parse_table acpi_ns_one_complete_parse acpi_ns_execute_table X(Interpreter) acpi_ns_load_table acpi_ev_initialize_region address_space.Setup address_space.Handler acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep E(Interpreter) X(Interpreter) Object evaluation: acpi_ns_evaluate E(Interpreter) acpi_ps_execute_method X(Interpreter) acpi_ns_load_table acpi_ev_initialize_region address_space.Setup address_space.Handler acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep E(Interpreter) X(Interpreter) Where: 1. E(Interpreter) means acquire(MTX_INTERPRETER, MTX_NAMESPACE); 2. X(Interpreter) means release(MTX_NAMESPACE, MTX_INTERPRETER); After this change, we can see: 1. All namespace nodes creations are locked by the namespace lock. 2. All namespace nodes referencing are locked with the same lock. 3. But we also can notice a defact that, all namespace nodes deletions could be affected by this change. As a consequence, acpi_ns_delete_namespace_subtree() may delete a static namespace node that is still referenced by the interpreter (for example, the parser scopes). Currently, we needn't worry about the last defact because in ACPICA, table unloading is not fully functioning, its design strictly relies on the fact that when the namespace deletion happens, either the AML table or the OSPMs should have been notified and thus either the AML table or the OSPMs shouldn't reference deletion-related namespace nodes during the namespace deletion. And this change still works with the above restrictions applied. While making this a-step-forward helps us to correct the wrong grammar to pull many things back to the correct rail. And pulling things back to the correct rail in return makes it possible for us to support fully functioning table unloading after doing many cleanups. While this patch is generated, all namespace locks are examined to ensure that they can meet either of the following pattens: 1. L(Namespace) U(Namespace) 2. E(Interpreter) X(Interpreter) 3. E(Interpreter) X(Interpreter) L(Namespace) U(Namespace) E(Interpreter) X(Interpreter) We ensure this by adding X(Interpreter)/E(Interpreter) or removing U(Namespace)/L(Namespace) for those currently are executed in the following order: E(Interpreter) L(Namespace) U(Namespace) X(Interpreter) And adding E(Interpreter)/X(Interpreter) for those currently are executed in the following order: X(Interpreter) E(Interpreter) Originally, the interpreter lock is held for the execution AML opcodes, the namespace lock is held for the named object creation AML opcodes. Since they are actually same in MS interpreter (can all be executed during the table loading), we can combine the 2 locks and tune the locking code better in this way. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701 # [1] Link: https://bugs.acpica.org/show_bug.cgi?id=1323 Link: https://github.com/acpica/acpica/commit/767ee533 Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reported-and-tested-by: Greg White <gwhite@kupulau.com> Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-07 00:07:10 -06:00
/*
* Parse the table and load the namespace with all named
* objects found within. Control methods are NOT parsed
* at this time. In fact, the control methods cannot be
* parsed until the entire namespace is loaded, because
* if a control method makes a forward reference (call)
* to another control method, we can't continue parsing
* because we don't know how many arguments to parse next!
*/
status = acpi_ns_parse_table(table_index, node);
if (ACPI_SUCCESS(status)) {
acpi_tb_set_table_loaded_flag(table_index, TRUE);
} else {
/*
* On error, delete any namespace objects created by this table.
* We cannot initialize these objects, so delete them. There are
* a couple of expecially bad cases:
* AE_ALREADY_EXISTS - namespace collision.
* AE_NOT_FOUND - the target of a Scope operator does not
* exist. This target of Scope must already exist in the
* namespace, as per the ACPI specification.
*/
acpi_ns_delete_namespace_by_owner(acpi_gbl_root_table_list.
tables[table_index].owner_id);
acpi_tb_release_owner_id(table_index);
return_ACPI_STATUS(status);
}
unlock:
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* Now we can parse the control methods. We always parse
* them here for a sanity check, and if configured for
* just-in-time parsing, we delete the control method
* parse trees.
*/
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"**** Begin Table Object Initialization\n"));
acpi_ex_enter_interpreter();
status = acpi_ds_initialize_objects(table_index, node);
acpi_ex_exit_interpreter();
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"**** Completed Table Object Initialization\n"));
/*
* Execute any module-level code that was detected during the table load
* phase. Although illegal since ACPI 2.0, there are many machines that
* contain this type of code. Each block of detected executable AML code
* outside of any control method is wrapped with a temporary control
* method object and placed on a global list. The methods on this list
* are executed below.
*
* This case executes the module-level code for each table immediately
* after the table has been loaded. This provides compatibility with
* other ACPI implementations. Optionally, the execution can be deferred
* until later, see acpi_initialize_objects.
*/
ACPICA: Interpreter: Fix MLC issues by switching to new term_list grammar for table loading ACPICA commit 0e24fb67cde08d7df7671d7d7b183490dc79707e The MLC (Module Level Code) is an ACPICA terminology describing the AML code out of any control method, its support is an indication of the interpreter behavior during the table loading. The original implementation of MLC in ACPICA had several issues: 1. Out of any control method, besides of the object creating opcodes, only the code blocks wrapped by "If/Else/While" opcodes were supported. 2. The supported MLC code blocks were executed after loading the table rather than being executed right in place. ============================================================ The demo of this order issue is as follows: Name (OBJ1, 1) If (CND1 == 1) { Name (OBJ2, 2) } Name (OBJ3, 3) The original MLC support created OBJ2 after OBJ3's creation. ============================================================ Other than these limitations, MLC support in ACPICA looks correct. And supporting this should be easy/natural for ACPICA, but enabling of this was blocked by some ACPICA internal and OSPM specific initialization order issues we've fixed recently. The wrong support started from the following false bug fixing commit: Commit: 7f0c826a437157d2b19662977e9cf3b472cf24a6 Subject: ACPICA: Add support for module-level executable AML code Commit: 9a884ab64a4d092b4c3bf24fd9a30f7fbd4591e7 Subject: ACPICA: Add additional module-level code support ... We can confirm Windows interpreter behavior via reverse engineering means. It can be proven that not only If/Else/While wrapped code blocks, all opcodes can be executed at the module level, including operation region accesses. And it can be proven that the MLC should be executed right in place, not in such a deferred way executed after loading the table. And the above facts indeed reflect the spec words around ACPI definition block tables (DSDT/SSDT/...), the entire table and the Scope object is defined by the AML specification in BNF style as: AMLCode := def_block_header term_list def_scope := scope_op pkg_length name_string term_list The bodies of the scope opening terms (AMLCode/Scope) are all term_list, thus the table loading should be no difference than the control method evaluations as the body of the Method is also defined by the AML specification as term_list: def_method := method_op pkg_length name_string method_flags term_list The only difference is: after evaluating control method, created named objects may be freed due to no reference, while named objects created by the table loading should only be freed after unloading the table. So this patch follows the spec and the de-facto standard behavior, enables the new grammar (term_list) for the table loading. By doing so, beyond the fixes to the above issues, we can see additional differences comparing to the old grammar based table loading: 1. Originally, beyond the scope opening terms (AMLCode/Scope), If/Else/While wrapped code blocks under the scope creating terms (Device/power_resource/Processor/thermal_zone) are also supported as deferred MLC, which violates the spec defined grammar where object_list is enforced. With MLC support improved as non-deferred, the interpreter parses such scope creating terms as term_list rather object_list like the scope opening terms. After probing the Windows behavior and proving that it also parses these terms as term_list, we submitted an ECR (Engineering Change Request) to the ASWG (ACPI Specification Working Group) to clarify this. The ECR is titled as "ASL Grammar Clarification for Executable AML Opcodes" and has been accepted by the ASWG. The new grammar will appear in ACPI specification 6.2. 2. Originally, Buffer/Package/operation_region/create_XXXField/bank_field arguments are evaluated in a deferred way after loading the table. With MLC support improved, they are also parsed right in place during the table loading. This is also Windows compliant and the only difference is the removal of the debugging messages implemented before acpi_ds_execute_arguments(), see Link # [1] for the details. A previous commit should have ensured that acpi_check_address_range() won't regress. Note that enabling this feature may cause regressions due to long term Linux ACPI support on top of the wrong grammar. So this patch also prepares a global option to be used to roll back to the old grammar during the period between a regression is reported and the regression is root-cause-fixed. Lv Zheng. Link: https://bugzilla.kernel.org/show_bug.cgi?id=112911 # [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=117671 # [1] Link: https://bugzilla.kernel.org/show_bug.cgi?id=153541 # [1] Link: https://github.com/acpica/acpica/issues/122 Link: https://bugs.acpica.org/show_bug.cgi?id=963 Link: https://github.com/acpica/acpica/commit/0e24fb67 Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Reported-by: Ehsan <dashesy@gmail.com> Reported-and-tested-by: Dutch Guy <lucht_piloot@gmx.net> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-07 00:06:54 -06:00
if (!acpi_gbl_parse_table_as_term_list
&& !acpi_gbl_group_module_level_code) {
acpi_ns_exec_module_code_list();
}
return_ACPI_STATUS(status);
}
#ifdef ACPI_OBSOLETE_FUNCTIONS
/*******************************************************************************
*
* FUNCTION: acpi_load_namespace
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Load the name space from what ever is pointed to by DSDT.
* (DSDT points to either the BIOS or a buffer.)
*
******************************************************************************/
acpi_status acpi_ns_load_namespace(void)
{
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
ACPI_FUNCTION_TRACE(acpi_load_name_space);
/* There must be at least a DSDT installed */
if (acpi_gbl_DSDT == NULL) {
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 14:43:00 -07:00
ACPI_ERROR((AE_INFO, "DSDT is not in memory"));
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
/*
* Load the namespace. The DSDT is required,
* but the SSDT and PSDT tables are optional.
*/
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
status = acpi_ns_load_table_by_type(ACPI_TABLE_ID_DSDT);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Ignore exceptions from these */
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
(void)acpi_ns_load_table_by_type(ACPI_TABLE_ID_SSDT);
(void)acpi_ns_load_table_by_type(ACPI_TABLE_ID_PSDT);
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
"ACPI Namespace successfully loaded at root %p\n",
acpi_gbl_root_node));
return_ACPI_STATUS(status);
}
#endif
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 20:49:35 -06:00
#ifdef ACPI_FUTURE_IMPLEMENTATION
/*******************************************************************************
*
* FUNCTION: acpi_ns_delete_subtree
*
* PARAMETERS: start_handle - Handle in namespace where search begins
*
* RETURNS Status
*
* DESCRIPTION: Walks the namespace starting at the given handle and deletes
* all objects, entries, and scopes in the entire subtree.
*
* Namespace/Interpreter should be locked or the subsystem should
* be in shutdown before this routine is called.
*
******************************************************************************/
static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle)
{
acpi_status status;
acpi_handle child_handle;
acpi_handle parent_handle;
acpi_handle next_child_handle;
acpi_handle dummy;
u32 level;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
ACPI_FUNCTION_TRACE(ns_delete_subtree);
parent_handle = start_handle;
child_handle = NULL;
level = 1;
/*
* Traverse the tree of objects until we bubble back up
* to where we started.
*/
while (level > 0) {
/* Attempt to get the next object in this scope */
status = acpi_get_next_object(ACPI_TYPE_ANY, parent_handle,
child_handle, &next_child_handle);
child_handle = next_child_handle;
/* Did we get a new object? */
if (ACPI_SUCCESS(status)) {
/* Check if this object has any children */
if (ACPI_SUCCESS
(acpi_get_next_object
(ACPI_TYPE_ANY, child_handle, NULL, &dummy))) {
/*
* There is at least one child of this object,
* visit the object
*/
level++;
parent_handle = child_handle;
child_handle = NULL;
}
} else {
/*
* No more children in this object, go back up to
* the object's parent
*/
level--;
/* Delete all children now */
acpi_ns_delete_children(child_handle);
child_handle = parent_handle;
status = acpi_get_parent(parent_handle, &parent_handle);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
/* Now delete the starting object, and we are done */
acpi_ns_remove_node(child_handle);
return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ns_unload_name_space
*
* PARAMETERS: handle - Root of namespace subtree to be deleted
*
* RETURN: Status
*
* DESCRIPTION: Shrinks the namespace, typically in response to an undocking
* event. Deletes an entire subtree starting from (and
* including) the given handle.
*
******************************************************************************/
acpi_status acpi_ns_unload_namespace(acpi_handle handle)
{
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
ACPI_FUNCTION_TRACE(ns_unload_name_space);
/* Parameter validation */
if (!acpi_gbl_root_node) {
return_ACPI_STATUS(AE_NO_NAMESPACE);
}
if (!handle) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* This function does the real work */
status = acpi_ns_delete_subtree(handle);
return_ACPI_STATUS(status);
}
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 20:49:35 -06:00
#endif
#endif