1
0
Fork 0
alistair23-linux/include/linux/device-mapper.h

626 lines
18 KiB
C
Raw Normal View History

/*
* Copyright (C) 2001 Sistina Software (UK) Limited.
* Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This file is released under the LGPL.
*/
#ifndef _LINUX_DEVICE_MAPPER_H
#define _LINUX_DEVICE_MAPPER_H
#include <linux/bio.h>
#include <linux/blkdev.h>
dm: add support to directly boot to a mapped device Add a "create" module parameter, which allows device-mapper targets to be configured at boot time. This enables early use of DM targets in the boot process (as the root device or otherwise) without the need of an initramfs. The syntax used in the boot param is based on the concise format from the dmsetup tool to follow the rule of least surprise: dmsetup table --concise /dev/mapper/lroot Which is: dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+] Where, <name> ::= The device name. <uuid> ::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | "" <minor> ::= The device minor number | "" <flags> ::= "ro" | "rw" <table> ::= <start_sector> <num_sectors> <target_type> <target_args> <target_type> ::= "verity" | "linear" | ... For example, the following could be added in the boot parameters: dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0 Only the targets that were tested are allowed and the ones that don't change any block device when the device is create as read-only. For example, mirror and cache targets are not allowed. The rationale behind this is that if the user makes a mistake, choosing the wrong device to be the mirror or the cache can corrupt data. The only targets initially allowed are: * crypt * delay * linear * snapshot-origin * striped * verity Co-developed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-02-21 13:33:34 -07:00
#include <linux/dm-ioctl.h>
#include <linux/math64.h>
#include <linux/ratelimit.h>
struct dm_dev;
struct dm_target;
struct dm_table;
struct mapped_device;
struct bio_vec;
/*
* Type of table, mapped_device's mempool and request_queue
*/
enum dm_queue_mode {
DM_TYPE_NONE = 0,
DM_TYPE_BIO_BASED = 1,
DM_TYPE_REQUEST_BASED = 2,
DM_TYPE_DAX_BIO_BASED = 3,
DM_TYPE_NVME_BIO_BASED = 4,
};
typedef enum { STATUSTYPE_INFO, STATUSTYPE_TABLE } status_type_t;
union map_info {
void *ptr;
};
/*
* In the constructor the target parameter will already have the
* table, type, begin and len fields filled in.
*/
typedef int (*dm_ctr_fn) (struct dm_target *target,
unsigned int argc, char **argv);
/*
* The destructor doesn't need to free the dm_target, just
* anything hidden ti->private.
*/
typedef void (*dm_dtr_fn) (struct dm_target *ti);
/*
* The map function must return:
* < 0: error
* = 0: The target will handle the io by resubmitting it later
2006-12-08 03:41:05 -07:00
* = 1: simple remap complete
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 03:41:09 -07:00
* = 2: The target wants to push back the io
*/
typedef int (*dm_map_fn) (struct dm_target *ti, struct bio *bio);
2014-12-17 19:08:12 -07:00
typedef int (*dm_clone_and_map_request_fn) (struct dm_target *ti,
struct request *rq,
union map_info *map_context,
struct request **clone);
typedef void (*dm_release_clone_request_fn) (struct request *clone,
union map_info *map_context);
/*
* Returns:
* < 0 : error (currently ignored)
* 0 : ended successfully
* 1 : for some reason the io has still not completed (eg,
* multipath target might want to requeue a failed io).
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 03:41:09 -07:00
* 2 : The target wants to push back the io
*/
typedef int (*dm_endio_fn) (struct dm_target *ti,
struct bio *bio, blk_status_t *error);
typedef int (*dm_request_endio_fn) (struct dm_target *ti,
struct request *clone, blk_status_t error,
union map_info *map_context);
typedef void (*dm_presuspend_fn) (struct dm_target *ti);
typedef void (*dm_presuspend_undo_fn) (struct dm_target *ti);
typedef void (*dm_postsuspend_fn) (struct dm_target *ti);
typedef int (*dm_preresume_fn) (struct dm_target *ti);
typedef void (*dm_resume_fn) (struct dm_target *ti);
dm: fix truncated status strings Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2013-03-01 15:45:44 -07:00
typedef void (*dm_status_fn) (struct dm_target *ti, status_type_t status_type,
unsigned status_flags, char *result, unsigned maxlen);
typedef int (*dm_message_fn) (struct dm_target *ti, unsigned argc, char **argv,
char *result, unsigned maxlen);
typedef int (*dm_prepare_ioctl_fn) (struct dm_target *ti, struct block_device **bdev);
typedef int (*dm_report_zones_fn) (struct dm_target *ti, sector_t sector,
struct blk_zone *zones,
unsigned int *nr_zones);
/*
* These iteration functions are typically used to check (and combine)
* properties of underlying devices.
* E.g. Does at least one underlying device support flush?
* Does any underlying device not support WRITE_SAME?
*
* The callout function is called once for each contiguous section of
* an underlying device. State can be maintained in *data.
* Return non-zero to stop iterating through any further devices.
*/
typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
struct dm_dev *dev,
sector_t start, sector_t len,
void *data);
/*
* This function must iterate through each section of device used by the
* target until it encounters a non-zero return code, which it then returns.
* Returns zero if no callout returned non-zero.
*/
typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
iterate_devices_callout_fn fn,
void *data);
typedef void (*dm_io_hints_fn) (struct dm_target *ti,
struct queue_limits *limits);
/*
* Returns:
* 0: The target can handle the next I/O immediately.
* 1: The target can't handle the next I/O immediately.
*/
typedef int (*dm_busy_fn) (struct dm_target *ti);
/*
* Returns:
* < 0 : error
* >= 0 : the number of bytes accessible at the address
*/
typedef long (*dm_dax_direct_access_fn) (struct dm_target *ti, pgoff_t pgoff,
long nr_pages, void **kaddr, pfn_t *pfn);
typedef size_t (*dm_dax_copy_iter_fn)(struct dm_target *ti, pgoff_t pgoff,
void *addr, size_t bytes, struct iov_iter *i);
#define PAGE_SECTORS (PAGE_SIZE / 512)
void dm_error(const char *message);
struct dm_dev {
struct block_device *bdev;
struct dax_device *dax_dev;
fmode_t mode;
char name[16];
};
dm snapshot: disallow the COW and origin devices from being identical Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[<ffffffffa040efba>] [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20 [ 1959.261816] [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [<ffffffff81216449>] SyS_ioctl+0x79/0x90 [ 1959.294450] [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP <ffff88032a957b30> [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899 Cc: stable@vger.kernel.org Signed-off-by: Ding Xiang <dingxiang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-02-01 21:29:18 -07:00
dev_t dm_get_dev_t(const char *path);
/*
* Constructors should call these functions to ensure destination devices
* are opened/closed correctly.
*/
int dm_get_device(struct dm_target *ti, const char *path, fmode_t mode,
struct dm_dev **result);
void dm_put_device(struct dm_target *ti, struct dm_dev *d);
/*
* Information about a target type
*/
struct target_type {
uint64_t features;
const char *name;
struct module *module;
unsigned version[3];
dm_ctr_fn ctr;
dm_dtr_fn dtr;
dm_map_fn map;
2014-12-17 19:08:12 -07:00
dm_clone_and_map_request_fn clone_and_map_rq;
dm_release_clone_request_fn release_clone_rq;
dm_endio_fn end_io;
dm_request_endio_fn rq_end_io;
dm_presuspend_fn presuspend;
dm_presuspend_undo_fn presuspend_undo;
dm_postsuspend_fn postsuspend;
dm_preresume_fn preresume;
dm_resume_fn resume;
dm_status_fn status;
dm_message_fn message;
dm_prepare_ioctl_fn prepare_ioctl;
#ifdef CONFIG_BLK_DEV_ZONED
dm_report_zones_fn report_zones;
#endif
dm_busy_fn busy;
dm_iterate_devices_fn iterate_devices;
dm_io_hints_fn io_hints;
dm_dax_direct_access_fn direct_access;
dm_dax_copy_iter_fn dax_copy_from_iter;
dm_dax_copy_iter_fn dax_copy_to_iter;
/* For internal device-mapper use. */
struct list_head list;
};
/*
* Target features
*/
/*
* Any table that contains an instance of this target must have only one.
*/
#define DM_TARGET_SINGLETON 0x00000001
#define dm_target_needs_singleton(type) ((type)->features & DM_TARGET_SINGLETON)
/*
* Indicates that a target does not support read-only devices.
*/
#define DM_TARGET_ALWAYS_WRITEABLE 0x00000002
#define dm_target_always_writeable(type) \
((type)->features & DM_TARGET_ALWAYS_WRITEABLE)
/*
* Any device that contains a table with an instance of this target may never
* have tables containing any different target type.
*/
#define DM_TARGET_IMMUTABLE 0x00000004
#define dm_target_is_immutable(type) ((type)->features & DM_TARGET_IMMUTABLE)
/*
* Indicates that a target may replace any target; even immutable targets.
* .map, .map_rq, .clone_and_map_rq and .release_clone_rq are all defined.
*/
#define DM_TARGET_WILDCARD 0x00000008
#define dm_target_is_wildcard(type) ((type)->features & DM_TARGET_WILDCARD)
/*
* A target implements own bio data integrity.
*/
#define DM_TARGET_INTEGRITY 0x00000010
#define dm_target_has_integrity(type) ((type)->features & DM_TARGET_INTEGRITY)
/*
* A target passes integrity data to the lower device.
*/
#define DM_TARGET_PASSES_INTEGRITY 0x00000020
#define dm_target_passes_integrity(type) ((type)->features & DM_TARGET_PASSES_INTEGRITY)
dm table: add zoned block devices validation 1) Introduce DM_TARGET_ZONED_HM feature flag: The target drivers currently available will not operate correctly if a table target maps onto a host-managed zoned block device. To avoid problems, introduce the new feature flag DM_TARGET_ZONED_HM to allow a target to explicitly state that it supports host-managed zoned block devices. This feature is checked for all targets in a table if any of the table's block devices are host-managed. Note that as host-aware zoned block devices are backward compatible with regular block devices, they can be used by any of the current target types. This new feature is thus restricted to host-managed zoned block devices. 2) Check device area zone alignment: If a target maps to a zoned block device, check that the device area is aligned on zone boundaries to avoid problems with REQ_OP_ZONE_RESET operations (resetting a partially mapped sequential zone would not be possible). This also facilitates the processing of zone report with REQ_OP_ZONE_REPORT bios. 3) Check block devices zone model compatibility When setting the DM device's queue limits, several possibilities exists for zoned block devices: 1) The DM target driver may want to expose a different zone model (e.g. host-managed device emulation or regular block device on top of host-managed zoned block devices) 2) Expose the underlying zone model of the devices as-is To allow both cases, the underlying block device zone model must be set in the target limits in dm_set_device_limits() and the compatibility of all devices checked similarly to the logical block size alignment. For this last check, introduce validate_hardware_zoned_model() to check that all targets of a table have the same zone model and that the zone size of the target devices are equal. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> [Mike Snitzer refactored Damien's original work to simplify the code] Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-05-08 17:40:43 -06:00
/*
* Indicates that a target supports host-managed zoned block devices.
*/
#define DM_TARGET_ZONED_HM 0x00000040
#define dm_target_supports_zoned_hm(type) ((type)->features & DM_TARGET_ZONED_HM)
struct dm_target {
struct dm_table *table;
struct target_type *type;
/* target limits */
sector_t begin;
sector_t len;
/* If non-zero, maximum size of I/O submitted to a target. */
uint32_t max_io_len;
/*
* A number of zero-length barrier bios that will be submitted
* to the target for the purpose of flushing cache.
*
* The bio number can be accessed with dm_bio_get_target_bio_nr.
* It is a responsibility of the target driver to remap these bios
* to the real underlying devices.
*/
unsigned num_flush_bios;
/*
* The number of discard bios that will be submitted to the target.
* The bio number can be accessed with dm_bio_get_target_bio_nr.
*/
unsigned num_discard_bios;
/*
* The number of secure erase bios that will be submitted to the target.
* The bio number can be accessed with dm_bio_get_target_bio_nr.
*/
unsigned num_secure_erase_bios;
/*
* The number of WRITE SAME bios that will be submitted to the target.
* The bio number can be accessed with dm_bio_get_target_bio_nr.
*/
unsigned num_write_same_bios;
/*
* The number of WRITE ZEROES bios that will be submitted to the target.
* The bio number can be accessed with dm_bio_get_target_bio_nr.
*/
unsigned num_write_zeroes_bios;
/*
* The minimum number of extra bytes allocated in each io for the
* target to use.
*/
unsigned per_io_data_size;
/* target specific data */
void *private;
/* Used to provide an error string from the ctr */
char *error;
/*
* Set if this target needs to receive flushes regardless of
* whether or not its underlying devices have support.
*/
bool flush_supported:1;
/*
* Set if this target needs to receive discards regardless of
* whether or not its underlying devices have support.
*/
bool discards_supported:1;
};
/* Each target can link one of these into the table */
struct dm_target_callbacks {
struct list_head list;
int (*congested_fn) (struct dm_target_callbacks *, int);
};
void *dm_per_bio_data(struct bio *bio, size_t data_size);
struct bio *dm_bio_from_per_bio_data(void *data, size_t data_size);
unsigned dm_bio_get_target_bio_nr(const struct bio *bio);
int dm_register_target(struct target_type *t);
void dm_unregister_target(struct target_type *t);
/*
* Target argument parsing.
*/
struct dm_arg_set {
unsigned argc;
char **argv;
};
/*
* The minimum and maximum value of a numeric argument, together with
* the error message to use if the number is found to be outside that range.
*/
struct dm_arg {
unsigned min;
unsigned max;
char *error;
};
/*
* Validate the next argument, either returning it as *value or, if invalid,
* returning -EINVAL and setting *error.
*/
int dm_read_arg(const struct dm_arg *arg, struct dm_arg_set *arg_set,
unsigned *value, char **error);
/*
* Process the next argument as the start of a group containing between
* arg->min and arg->max further arguments. Either return the size as
* *num_args or, if invalid, return -EINVAL and set *error.
*/
int dm_read_arg_group(const struct dm_arg *arg, struct dm_arg_set *arg_set,
unsigned *num_args, char **error);
/*
* Return the current argument and shift to the next.
*/
const char *dm_shift_arg(struct dm_arg_set *as);
/*
* Move through num_args arguments.
*/
void dm_consume_args(struct dm_arg_set *as, unsigned num_args);
/*-----------------------------------------------------------------
* Functions for creating and manipulating mapped devices.
* Drop the reference with dm_put when you finish with the object.
*---------------------------------------------------------------*/
/*
* DM_ANY_MINOR chooses the next available minor number.
*/
#define DM_ANY_MINOR (-1)
int dm_create(int minor, struct mapped_device **md);
/*
* Reference counting for md.
*/
struct mapped_device *dm_get_md(dev_t dev);
void dm_get(struct mapped_device *md);
int dm_hold(struct mapped_device *md);
void dm_put(struct mapped_device *md);
/*
* An arbitrary pointer may be stored alongside a mapped device.
*/
void dm_set_mdptr(struct mapped_device *md, void *ptr);
void *dm_get_mdptr(struct mapped_device *md);
/*
* A device can still be used while suspended, but I/O is deferred.
*/
int dm_suspend(struct mapped_device *md, unsigned suspend_flags);
int dm_resume(struct mapped_device *md);
/*
* Event functions.
*/
uint32_t dm_get_event_nr(struct mapped_device *md);
int dm_wait_event(struct mapped_device *md, int event_nr);
uint32_t dm_next_uevent_seq(struct mapped_device *md);
void dm_uevent_add(struct mapped_device *md, struct list_head *elist);
/*
* Info functions.
*/
const char *dm_device_name(struct mapped_device *md);
int dm_copy_name_and_uuid(struct mapped_device *md, char *name, char *uuid);
struct gendisk *dm_disk(struct mapped_device *md);
int dm_suspended(struct dm_target *ti);
[PATCH] dm: suspend: add noflush pushback In device-mapper I/O is sometimes queued within targets for later processing. For example the multipath target can be configured to store I/O when no paths are available instead of returning it -EIO. This patch allows the device-mapper core to instruct a target to transfer the contents of any such in-target queue back into the core. This frees up the resources used by the target so the core can replace that target with an alternative one and then resend the I/O to it. Without this patch the only way to change the target in such circumstances involves returning the I/O with an error back to the filesystem/application. In the multipath case, this patch will let us add new paths for existing I/O to try after all the existing paths have failed. DMF_NOFLUSH_SUSPENDING ---------------------- If the DM_NOFLUSH_FLAG ioctl option is specified at suspend time, the DMF_NOFLUSH_SUSPENDING flag is set in md->flags during dm_suspend(). It is always cleared before dm_suspend() returns. The flag must be visible while the target is flushing pending I/Os so it is set before presuspend where the flush starts and unset after the wait for md->pending where the flush ends. Target drivers can check this flag by calling dm_noflush_suspending(). DM_MAPIO_REQUEUE / DM_ENDIO_REQUEUE ----------------------------------- A target's map() function can now return DM_MAPIO_REQUEUE to request the device mapper core queue the bio. Similarly, a target's end_io() function can return DM_ENDIO_REQUEUE to request the same. This has been labelled 'pushback'. The __map_bio() and clone_endio() functions in the core treat these return values as errors and call dec_pending() to end the I/O. dec_pending ----------- dec_pending() saves the pushback request in struct dm_io->error. Once all the split clones have ended, dec_pending() will put the original bio on the md->pushback list. Note that this supercedes any I/O errors. It is possible for the suspend with DM_NOFLUSH_FLAG to be aborted while in progress (e.g. by user interrupt). dec_pending() checks for this and returns -EIO if it happened. pushdback list and pushback_lock -------------------------------- The bio is queued on md->pushback temporarily in dec_pending(), and after all pending I/Os return, md->pushback is merged into md->deferred in dm_suspend() for re-issuing at resume time. md->pushback_lock protects md->pushback. The lock should be held with irq disabled because dec_pending() can be called from interrupt context. Queueing bios to md->pushback in dec_pending() must be done atomically with the check for DMF_NOFLUSH_SUSPENDING flag. So md->pushback_lock is held when checking the flag. Otherwise dec_pending() may queue a bio to md->pushback after the interrupted dm_suspend() flushes md->pushback. Then the bio would be left in md->pushback. Flag setting in dm_suspend() can be done without md->pushback_lock because the flag is checked only after presuspend and the set value is already made visible via the target's presuspend function. The flag can be checked without md->pushback_lock (e.g. the first part of the dec_pending() or target drivers), because the flag is checked again with md->pushback_lock held when the bio is really queued to md->pushback as described above. So even if the flag is cleared after the lockless checkings, the bio isn't left in md->pushback but returned to applications with -EIO. Other notes on the current patch -------------------------------- - md->pushback is added to the struct mapped_device instead of using md->deferred directly because md->io_lock which protects md->deferred is rw_semaphore and can't be used in interrupt context like dec_pending(), and md->io_lock protects the DMF_BLOCK_IO flag of md->flags too. - Don't issue lock_fs() in dm_suspend() if the DM_NOFLUSH_FLAG ioctl option is specified, because I/Os generated by lock_fs() would be pushed back and never return if there were no valid devices. - If an error occurs in dm_suspend() after the DMF_NOFLUSH_SUSPENDING flag is set, md->pushback must be flushed because I/Os may be queued to the list already. (flush_and_out label in dm_suspend()) Test results ------------ I have tested using multipath target with the next patch. The following tests are for regression/compatibility: - I/Os succeed when valid paths exist; - I/Os fail when there are no valid paths and queue_if_no_path is not set; - I/Os are queued in the multipath target when there are no valid paths and queue_if_no_path is set; - The queued I/Os above fail when suspend is issued without the DM_NOFLUSH_FLAG ioctl option. I/Os spanning 2 multipath targets also fail. The following tests are for the normal code path of new pushback feature: - Queued I/Os in the multipath target are flushed from the target but don't return when suspend is issued with the DM_NOFLUSH_FLAG ioctl option; - The I/Os above are queued in the multipath target again when resume is issued without path recovery; - The I/Os above succeed when resume is issued after path recovery or table load; - Queued I/Os in the multipath target succeed when resume is issued with the DM_NOFLUSH_FLAG ioctl option after table load. I/Os spanning 2 multipath targets also succeed. The following tests are for the error paths of the new pushback feature: - When the bdget_disk() fails in dm_suspend(), the DMF_NOFLUSH_SUSPENDING flag is cleared and I/Os already queued to the pushback list are flushed properly. - When suspend with the DM_NOFLUSH_FLAG ioctl option is interrupted, o I/Os which had already been queued to the pushback list at the time don't return, and are re-issued at resume time; o I/Os which hadn't been returned at the time return with EIO. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-08 03:41:09 -07:00
int dm_noflush_suspending(struct dm_target *ti);
void dm_accept_partial_bio(struct bio *bio, unsigned n_sectors);
void dm_remap_zone_report(struct dm_target *ti, sector_t start,
struct blk_zone *zones, unsigned int *nr_zones);
dm: prepare for request based option This patch adds core functions for request-based dm. When struct mapped device (md) is initialized, md->queue has an I/O scheduler and the following functions are used for request-based dm as the queue functions: make_request_fn: dm_make_request() pref_fn: dm_prep_fn() request_fn: dm_request_fn() softirq_done_fn: dm_softirq_done() lld_busy_fn: dm_lld_busy() Actual initializations are done in another patch (PATCH 2). Below is a brief summary of how request-based dm behaves, including: - making request from bio - cloning, mapping and dispatching request - completing request and bio - suspending md - resuming md bio to request ============== md->queue->make_request_fn() (dm_make_request()) calls __make_request() for a bio submitted to the md. Then, the bio is kept in the queue as a new request or merged into another request in the queue if possible. Cloning and Mapping =================== Cloning and mapping are done in md->queue->request_fn() (dm_request_fn()), when requests are dispatched after they are sorted by the I/O scheduler. dm_request_fn() checks busy state of underlying devices using target's busy() function and stops dispatching requests to keep them on the dm device's queue if busy. It helps better I/O merging, since no merge is done for a request once it is dispatched to underlying devices. Actual cloning and mapping are done in dm_prep_fn() and map_request() called from dm_request_fn(). dm_prep_fn() clones not only request but also bios of the request so that dm can hold bio completion in error cases and prevent the bio submitter from noticing the error. (See the "Completion" section below for details.) After the cloning, the clone is mapped by target's map_rq() function and inserted to underlying device's queue using blk_insert_cloned_request(). Completion ========== Request completion can be hooked by rq->end_io(), but then, all bios in the request will have been completed even error cases, and the bio submitter will have noticed the error. To prevent the bio completion in error cases, request-based dm clones both bio and request and hooks both bio->bi_end_io() and rq->end_io(): bio->bi_end_io(): end_clone_bio() rq->end_io(): end_clone_request() Summary of the request completion flow is below: blk_end_request() for a clone request => blk_update_request() => bio->bi_end_io() == end_clone_bio() for each clone bio => Free the clone bio => Success: Complete the original bio (blk_update_request()) Error: Don't complete the original bio => blk_finish_request() => rq->end_io() == end_clone_request() => blk_complete_request() => dm_softirq_done() => Free the clone request => Success: Complete the original request (blk_end_request()) Error: Requeue the original request end_clone_bio() completes the original request on the size of the original bio in successful cases. Even if all bios in the original request are completed by that completion, the original request must not be completed yet to keep the ordering of request completion for the stacking. So end_clone_bio() uses blk_update_request() instead of blk_end_request(). In error cases, end_clone_bio() doesn't complete the original bio. It just frees the cloned bio and gives over the error handling to end_clone_request(). end_clone_request(), which is called with queue lock held, completes the clone request and the original request in a softirq context (dm_softirq_done()), which has no queue lock, to avoid a deadlock issue on submission of another request during the completion: - The submitted request may be mapped to the same device - Request submission requires queue lock, but the queue lock has been held by itself and it doesn't know that The clone request has no clone bio when dm_softirq_done() is called. So target drivers can't resubmit it again even error cases. Instead, they can ask dm core for requeueing and remapping the original request in that cases. suspend ======= Request-based dm uses stopping md->queue as suspend of the md. For noflush suspend, just stops md->queue. For flush suspend, inserts a marker request to the tail of md->queue. And dispatches all requests in md->queue until the marker comes to the front of md->queue. Then, stops dispatching request and waits for the all dispatched requests to complete. After that, completes the marker request, stops md->queue and wake up the waiter on the suspend queue, md->wait. resume ====== Starts md->queue. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-06-22 03:12:35 -06:00
union map_info *dm_get_rq_mapinfo(struct request *rq);
dm: add support to directly boot to a mapped device Add a "create" module parameter, which allows device-mapper targets to be configured at boot time. This enables early use of DM targets in the boot process (as the root device or otherwise) without the need of an initramfs. The syntax used in the boot param is based on the concise format from the dmsetup tool to follow the rule of least surprise: dmsetup table --concise /dev/mapper/lroot Which is: dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+] Where, <name> ::= The device name. <uuid> ::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | "" <minor> ::= The device minor number | "" <flags> ::= "ro" | "rw" <table> ::= <start_sector> <num_sectors> <target_type> <target_args> <target_type> ::= "verity" | "linear" | ... For example, the following could be added in the boot parameters: dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0 Only the targets that were tested are allowed and the ones that don't change any block device when the device is create as read-only. For example, mirror and cache targets are not allowed. The rationale behind this is that if the user makes a mistake, choosing the wrong device to be the mirror or the cache can corrupt data. The only targets initially allowed are: * crypt * delay * linear * snapshot-origin * striped * verity Co-developed-by: Will Drewry <wad@chromium.org> Co-developed-by: Kees Cook <keescook@chromium.org> Co-developed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-02-21 13:33:34 -07:00
/*
* Device mapper functions to parse and create devices specified by the
* parameter "dm-mod.create="
*/
int __init dm_early_create(struct dm_ioctl *dmi,
struct dm_target_spec **spec_array,
char **target_params_array);
dm mpath: disable WRITE SAME if it fails Workaround the SCSI layer's problematic WRITE SAME heuristics by disabling WRITE SAME in the DM multipath device's queue_limits if an underlying device disabled it. The WRITE SAME heuristics, with both the original commit 5db44863b6eb ("[SCSI] sd: Implement support for WRITE SAME") and the updated commit 66c28f971 ("[SCSI] sd: Update WRITE SAME heuristics"), default to enabling WRITE SAME(10) even without successfully determining it is supported. After the first failed WRITE SAME the SCSI layer will disable WRITE SAME for the device (by setting sdkp->device->no_write_same which results in 'max_write_same_sectors' in device's queue_limits to be set to 0). When a device is stacked ontop of such a SCSI device any changes to that SCSI device's queue_limits do not automatically propagate up the stack. As such, a DM multipath device will not have its WRITE SAME support disabled. This causes the block layer to continue to issue WRITE SAME requests to the mpath device which causes paths to fail and (if mpath IO isn't configured to queue when no paths are available) it will result in actual IO errors to the upper layers. This fix doesn't help configurations that have additional devices stacked ontop of the mpath device (e.g. LVM created linear DM devices ontop). A proper fix that restacks all the queue_limits from the bottom of the device stack up will need to be explored if SCSI will continue to use this model of optimistically allowing op codes and then disabling them after they fail for the first time. Before this patch: EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121) device-mapper: multipath: XXX snitm debugging: failing WRITE SAME IO with error=-121 end_request: critical target error, dev dm-6, sector 528 dm-6: WRITE SAME failed. Manually zeroing. device-mapper: multipath: Failing path 8:112. end_request: I/O error, dev dm-6, sector 4616 dm-6: WRITE SAME failed. Manually zeroing. end_request: I/O error, dev dm-6, sector 4616 end_request: I/O error, dev dm-6, sector 5640 end_request: I/O error, dev dm-6, sector 6664 end_request: I/O error, dev dm-6, sector 7688 end_request: I/O error, dev dm-6, sector 524288 Buffer I/O error on device dm-6, logical block 65536 lost page write due to I/O error on dm-6 JBD2: Error -5 detected when updating journal superblock for dm-6-8. end_request: I/O error, dev dm-6, sector 524296 Aborting journal on device dm-6-8. end_request: I/O error, dev dm-6, sector 524288 Buffer I/O error on device dm-6, logical block 65536 lost page write due to I/O error on dm-6 JBD2: Error -5 detected when updating journal superblock for dm-6-8. # cat /sys/block/sdh/queue/write_same_max_bytes 0 # cat /sys/block/dm-6/queue/write_same_max_bytes 33553920 After this patch: EXT4-fs (dm-6): mounted filesystem with ordered data mode. Opts: (null) device-mapper: multipath: XXX snitm debugging: got -EREMOTEIO (-121) device-mapper: multipath: XXX snitm debugging: WRITE SAME I/O failed with error=-121 end_request: critical target error, dev dm-6, sector 528 dm-6: WRITE SAME failed. Manually zeroing. # cat /sys/block/sdh/queue/write_same_max_bytes 0 # cat /sys/block/dm-6/queue/write_same_max_bytes 0 It should be noted that WRITE SAME support wasn't enabled in DM multipath until v3.10. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org # 3.10+
2013-09-19 10:13:58 -06:00
struct queue_limits *dm_get_queue_limits(struct mapped_device *md);
/*
* Geometry functions.
*/
int dm_get_geometry(struct mapped_device *md, struct hd_geometry *geo);
int dm_set_geometry(struct mapped_device *md, struct hd_geometry *geo);
/*-----------------------------------------------------------------
* Functions for manipulating device-mapper tables.
*---------------------------------------------------------------*/
/*
* First create an empty table.
*/
int dm_table_create(struct dm_table **result, fmode_t mode,
unsigned num_targets, struct mapped_device *md);
/*
* Then call this once for each target.
*/
int dm_table_add_target(struct dm_table *t, const char *type,
sector_t start, sector_t len, char *params);
/*
* Target_ctr should call this if it needs to add any callbacks.
*/
void dm_table_add_target_callbacks(struct dm_table *t, struct dm_target_callbacks *cb);
/*
* Target can use this to set the table's type.
* Can only ever be called from a target's ctr.
* Useful for "hybrid" target (supports both bio-based
* and request-based).
*/
void dm_table_set_type(struct dm_table *t, enum dm_queue_mode type);
/*
* Finally call this to make the table ready for use.
*/
int dm_table_complete(struct dm_table *t);
/*
* Destroy the table when finished.
*/
void dm_table_destroy(struct dm_table *t);
/*
* Target may require that it is never sent I/O larger than len.
*/
int __must_check dm_set_target_max_io_len(struct dm_target *ti, sector_t len);
/*
* Table reference counting.
*/
struct dm_table *dm_get_live_table(struct mapped_device *md, int *srcu_idx);
void dm_put_live_table(struct mapped_device *md, int srcu_idx);
void dm_sync_table(struct mapped_device *md);
/*
* Queries
*/
sector_t dm_table_get_size(struct dm_table *t);
unsigned int dm_table_get_num_targets(struct dm_table *t);
fmode_t dm_table_get_mode(struct dm_table *t);
struct mapped_device *dm_table_get_md(struct dm_table *t);
const char *dm_table_device_name(struct dm_table *t);
/*
* Trigger an event.
*/
void dm_table_event(struct dm_table *t);
/*
* Run the queue for request-based targets.
*/
void dm_table_run_md_queue_async(struct dm_table *t);
/*
* The device must be suspended before calling this method.
* Returns the previous table, which the caller must destroy.
*/
struct dm_table *dm_swap_table(struct mapped_device *md,
struct dm_table *t);
/*
* A wrapper around vmalloc.
*/
void *dm_vcalloc(unsigned long nmemb, unsigned long elem_size);
/*-----------------------------------------------------------------
* Macros.
*---------------------------------------------------------------*/
#define DM_NAME "device-mapper"
#define DM_RATELIMIT(pr_func, fmt, ...) \
do { \
static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL, \
DEFAULT_RATELIMIT_BURST); \
\
if (__ratelimit(&rs)) \
pr_func(DM_FMT(fmt), ##__VA_ARGS__); \
} while (0)
#define DM_FMT(fmt) DM_NAME ": " DM_MSG_PREFIX ": " fmt "\n"
#define DMCRIT(fmt, ...) pr_crit(DM_FMT(fmt), ##__VA_ARGS__)
#define DMERR(fmt, ...) pr_err(DM_FMT(fmt), ##__VA_ARGS__)
#define DMERR_LIMIT(fmt, ...) DM_RATELIMIT(pr_err, fmt, ##__VA_ARGS__)
#define DMWARN(fmt, ...) pr_warn(DM_FMT(fmt), ##__VA_ARGS__)
#define DMWARN_LIMIT(fmt, ...) DM_RATELIMIT(pr_warn, fmt, ##__VA_ARGS__)
#define DMINFO(fmt, ...) pr_info(DM_FMT(fmt), ##__VA_ARGS__)
#define DMINFO_LIMIT(fmt, ...) DM_RATELIMIT(pr_info, fmt, ##__VA_ARGS__)
#ifdef CONFIG_DM_DEBUG
#define DMDEBUG(fmt, ...) printk(KERN_DEBUG DM_FMT(fmt), ##__VA_ARGS__)
#define DMDEBUG_LIMIT(fmt, ...) DM_RATELIMIT(pr_debug, fmt, ##__VA_ARGS__)
#else
#define DMDEBUG(fmt, ...) no_printk(fmt, ##__VA_ARGS__)
#define DMDEBUG_LIMIT(fmt, ...) no_printk(fmt, ##__VA_ARGS__)
#endif
#define DMEMIT(x...) sz += ((sz >= maxlen) ? \
0 : scnprintf(result + sz, maxlen - sz, x))
/*
* Definitions of return values from target end_io function.
*/
#define DM_ENDIO_DONE 0
#define DM_ENDIO_INCOMPLETE 1
#define DM_ENDIO_REQUEUE 2
#define DM_ENDIO_DELAY_REQUEUE 3
/*
* Definitions of return values from target map function.
*/
#define DM_MAPIO_SUBMITTED 0
#define DM_MAPIO_REMAPPED 1
#define DM_MAPIO_REQUEUE DM_ENDIO_REQUEUE
#define DM_MAPIO_DELAY_REQUEUE DM_ENDIO_DELAY_REQUEUE
#define DM_MAPIO_KILL 4
#define dm_sector_div64(x, y)( \
{ \
u64 _res; \
(x) = div64_u64_rem(x, y, &_res); \
_res; \
} \
)
/*
* Ceiling(n / sz)
*/
#define dm_div_up(n, sz) (((n) + (sz) - 1) / (sz))
#define dm_sector_div_up(n, sz) ( \
{ \
sector_t _r = ((n) + (sz) - 1); \
sector_div(_r, (sz)); \
_r; \
} \
)
/*
* ceiling(n / size) * size
*/
#define dm_round_up(n, sz) (dm_div_up((n), (sz)) * (sz))
#define dm_array_too_big(fixed, obj, num) \
((num) > (UINT_MAX - (fixed)) / (obj))
/*
* Sector offset taken relative to the start of the target instead of
* relative to the start of the device.
*/
#define dm_target_offset(ti, sector) ((sector) - (ti)->begin)
static inline sector_t to_sector(unsigned long long n)
{
return (n >> SECTOR_SHIFT);
}
static inline unsigned long to_bytes(sector_t n)
{
return (n << SECTOR_SHIFT);
}
#endif /* _LINUX_DEVICE_MAPPER_H */