alistair23-linux/include/asm-x86/mach-bigsmp/mach_apic.h

145 lines
3.1 KiB
C
Raw Normal View History

#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
#define esr_disable (1)
static inline int apic_id_registered(void)
{
return (1);
}
/* Round robin the irqs amoung the online cpus */
static inline cpumask_t target_cpus(void)
{
static unsigned long cpu = NR_CPUS;
do {
if (cpu >= NR_CPUS)
cpu = first_cpu(cpu_online_map);
else
cpu = next_cpu(cpu, cpu_online_map);
} while (cpu >= NR_CPUS);
return cpumask_of_cpu(cpu);
}
#undef APIC_DEST_LOGICAL
#define APIC_DEST_LOGICAL 0
#define TARGET_CPUS (target_cpus())
#define APIC_DFR_VALUE (APIC_DFR_FLAT)
#define INT_DELIVERY_MODE (dest_Fixed)
#define INT_DEST_MODE (0) /* phys delivery to target proc */
#define NO_BALANCE_IRQ (0)
#define WAKE_SECONDARY_VIA_INIT
static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
{
return (0);
}
static inline unsigned long check_apicid_present(int bit)
{
return (1);
}
static inline unsigned long calculate_ldr(int cpu)
{
unsigned long val, id;
val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
id = xapic_phys_to_log_apicid(cpu);
val |= SET_APIC_LOGICAL_ID(id);
return val;
}
/*
* Set up the logical destination ID.
*
* Intel recommends to set DFR, LDR and TPR before enabling
* an APIC. See e.g. "AP-388 82489DX User's Manual" (Intel
* document number 292116). So here it goes...
*/
static inline void init_apic_ldr(void)
{
unsigned long val;
int cpu = smp_processor_id();
x86: APIC: remove apic_write_around(); use alternatives Use alternatives to select the workaround for the 11AP Pentium erratum for the affected steppings on the fly rather than build time. Remove the X86_GOOD_APIC configuration option and replace all the calls to apic_write_around() with plain apic_write(), protecting accesses to the ESR as appropriate due to the 3AP Pentium erratum. Remove apic_read_around() and all its invocations altogether as not needed. Remove apic_write_atomic() and all its implementing backends. The use of ASM_OUTPUT2() is not strictly needed for input constraints, but I have used it for readability's sake. I had the feeling no one else was brave enough to do it, so I went ahead and here it is. Verified by checking the generated assembly and tested with both a 32-bit and a 64-bit configuration, also with the 11AP "feature" forced on and verified with gdb on /proc/kcore to work as expected (as an 11AP machines are quite hard to get hands on these days). Some script complained about the use of "volatile", but apic_write() needs it for the same reason and is effectively a replacement for writel(), so I have disregarded it. I am not sure what the policy wrt defconfig files is, they are generated and there is risk of a conflict resulting from an unrelated change, so I have left changes to them out. The option will get removed from them at the next run. Some testing with machines other than mine will be needed to avoid some stupid mistake, but despite its volume, the change is not really that intrusive, so I am fairly confident that because it works for me, it will everywhere. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 12:15:30 -06:00
apic_write(APIC_DFR, APIC_DFR_VALUE);
val = calculate_ldr(cpu);
x86: APIC: remove apic_write_around(); use alternatives Use alternatives to select the workaround for the 11AP Pentium erratum for the affected steppings on the fly rather than build time. Remove the X86_GOOD_APIC configuration option and replace all the calls to apic_write_around() with plain apic_write(), protecting accesses to the ESR as appropriate due to the 3AP Pentium erratum. Remove apic_read_around() and all its invocations altogether as not needed. Remove apic_write_atomic() and all its implementing backends. The use of ASM_OUTPUT2() is not strictly needed for input constraints, but I have used it for readability's sake. I had the feeling no one else was brave enough to do it, so I went ahead and here it is. Verified by checking the generated assembly and tested with both a 32-bit and a 64-bit configuration, also with the 11AP "feature" forced on and verified with gdb on /proc/kcore to work as expected (as an 11AP machines are quite hard to get hands on these days). Some script complained about the use of "volatile", but apic_write() needs it for the same reason and is effectively a replacement for writel(), so I have disregarded it. I am not sure what the policy wrt defconfig files is, they are generated and there is risk of a conflict resulting from an unrelated change, so I have left changes to them out. The option will get removed from them at the next run. Some testing with machines other than mine will be needed to avoid some stupid mistake, but despite its volume, the change is not really that intrusive, so I am fairly confident that because it works for me, it will everywhere. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-16 12:15:30 -06:00
apic_write(APIC_LDR, val);
}
static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Physflat", nr_ioapics);
}
static inline int multi_timer_check(int apic, int irq)
{
return (0);
}
static inline int apicid_to_node(int logical_apicid)
{
return apicid_2_node[hard_smp_processor_id()];
}
static inline int cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < NR_CPUS)
return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
return BAD_APICID;
}
static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
{
return physid_mask_of_physid(phys_apicid);
}
extern u8 cpu_2_logical_apicid[];
/* Mapping from cpu number to logical apicid */
static inline int cpu_to_logical_apicid(int cpu)
{
if (cpu >= NR_CPUS)
return BAD_APICID;
return cpu_physical_id(cpu);
}
static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
{
/* For clustered we don't have a good way to do this yet - hack */
return physids_promote(0xFFL);
}
static inline void setup_portio_remap(void)
{
}
static inline void enable_apic_mode(void)
{
}
static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
{
return (1);
}
/* As we are using single CPU as destination, pick only one CPU here */
static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
{
int cpu;
int apicid;
cpu = first_cpu(cpumask);
apicid = cpu_to_logical_apicid(cpu);
return apicid;
}
static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
}
#endif /* __ASM_MACH_APIC_H */