2005-04-16 16:20:36 -06:00
|
|
|
/******************************************************************************
|
|
|
|
*
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
* Name: actbl1.h - Additional ACPI table definitions
|
2005-04-16 16:20:36 -06:00
|
|
|
*
|
|
|
|
*****************************************************************************/
|
|
|
|
|
|
|
|
/*
|
2007-02-02 09:48:24 -07:00
|
|
|
* Copyright (C) 2000 - 2007, R. Byron Moore
|
2005-04-16 16:20:36 -06:00
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
|
|
* without modification.
|
|
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
|
|
* including a substantially similar Disclaimer requirement for further
|
|
|
|
* binary redistribution.
|
|
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
|
|
* of any contributors may be used to endorse or promote products derived
|
|
|
|
* from this software without specific prior written permission.
|
|
|
|
*
|
|
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
|
|
* Software Foundation.
|
|
|
|
*
|
|
|
|
* NO WARRANTY
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __ACTBL1_H__
|
|
|
|
#define __ACTBL1_H__
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* Additional ACPI Tables
|
|
|
|
*
|
|
|
|
* These tables are not consumed directly by the ACPICA subsystem, but are
|
|
|
|
* included here to support device drivers and the AML disassembler.
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Values for description table header signatures. Useful because they make
|
|
|
|
* it more difficult to inadvertently type in the wrong signature.
|
|
|
|
*/
|
|
|
|
#define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */
|
2008-04-10 09:06:42 -06:00
|
|
|
#define ACPI_SIG_BERT "BERT" /* Boot Error Record Table */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
#define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */
|
|
|
|
#define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */
|
|
|
|
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
|
2007-02-02 09:48:19 -07:00
|
|
|
#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
#define ACPI_SIG_ECDT "ECDT" /* Embedded Controller Boot Resources Table */
|
2008-04-10 09:06:42 -06:00
|
|
|
#define ACPI_SIG_EINJ "EINJ" /* Error Injection table */
|
|
|
|
#define ACPI_SIG_ERST "ERST" /* Error Record Serialization Table */
|
|
|
|
#define ACPI_SIG_HEST "HEST" /* Hardware Error Source Table */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
|
2008-04-10 09:06:42 -06:00
|
|
|
#define ACPI_SIG_IBFT "IBFT" /* i_sCSI Boot Firmware Table */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
#define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */
|
|
|
|
#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */
|
|
|
|
#define ACPI_SIG_SBST "SBST" /* Smart Battery Specification Table */
|
2008-04-10 09:06:38 -06:00
|
|
|
#define ACPI_SIG_SLIC "SLIC" /* Software Licensing Description Table */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
#define ACPI_SIG_SLIT "SLIT" /* System Locality Distance Information Table */
|
|
|
|
#define ACPI_SIG_SPCR "SPCR" /* Serial Port Console Redirection table */
|
|
|
|
#define ACPI_SIG_SPMI "SPMI" /* Server Platform Management Interface table */
|
|
|
|
#define ACPI_SIG_SRAT "SRAT" /* System Resource Affinity Table */
|
|
|
|
#define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */
|
2008-04-10 09:06:42 -06:00
|
|
|
#define ACPI_SIG_UEFI "UEFI" /* Uefi Boot Optimization Table */
|
|
|
|
#define ACPI_SIG_WDAT "WDAT" /* Watchdog Action Table */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
#define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* All tables must be byte-packed to match the ACPI specification, since
|
|
|
|
* the tables are provided by the system BIOS.
|
|
|
|
*/
|
2005-04-16 16:20:36 -06:00
|
|
|
#pragma pack(1)
|
|
|
|
|
|
|
|
/*
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
* Note about bitfields: The u8 type is used for bitfields in ACPI tables.
|
|
|
|
* This is the only type that is even remotely portable. Anything else is not
|
|
|
|
* portable, so do not use any other bitfield types.
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
/* Common Subtable header (used in MADT, SRAT, etc.) */
|
2007-02-02 09:48:18 -07:00
|
|
|
|
|
|
|
struct acpi_subtable_header {
|
|
|
|
u8 type;
|
|
|
|
u8 length;
|
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
/* Common Subtable header for WHEA tables (EINJ, ERST, WDAT) */
|
|
|
|
|
|
|
|
struct acpi_whea_header {
|
|
|
|
u8 action;
|
|
|
|
u8 instruction;
|
|
|
|
u8 flags;
|
|
|
|
u8 reserved;
|
|
|
|
struct acpi_generic_address register_region;
|
2008-04-10 09:06:43 -06:00
|
|
|
u64 value; /* Value used with Read/Write register */
|
|
|
|
u64 mask; /* Bitmask required for this register instruction */
|
2008-04-10 09:06:42 -06:00
|
|
|
};
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* ASF - Alert Standard Format table (Signature "ASF!")
|
|
|
|
*
|
2007-02-02 09:48:20 -07:00
|
|
|
* Conforms to the Alert Standard Format Specification V2.0, 23 April 2003
|
|
|
|
*
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_asf {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
};
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* ASF subtable header */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
|
|
|
struct acpi_asf_header {
|
2007-02-02 09:48:18 -07:00
|
|
|
u8 type;
|
|
|
|
u8 reserved;
|
|
|
|
u16 length;
|
|
|
|
};
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Values for Type field above */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
enum acpi_asf_type {
|
|
|
|
ACPI_ASF_TYPE_INFO = 0,
|
|
|
|
ACPI_ASF_TYPE_ALERT = 1,
|
|
|
|
ACPI_ASF_TYPE_CONTROL = 2,
|
|
|
|
ACPI_ASF_TYPE_BOOT = 3,
|
|
|
|
ACPI_ASF_TYPE_ADDRESS = 4,
|
|
|
|
ACPI_ASF_TYPE_RESERVED = 5
|
|
|
|
};
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
/*
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
* ASF subtables
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
|
|
|
/* 0: ASF Information */
|
|
|
|
|
|
|
|
struct acpi_asf_info {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_asf_header header;
|
|
|
|
u8 min_reset_value;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 min_poll_interval;
|
|
|
|
u16 system_id;
|
|
|
|
u32 mfg_id;
|
|
|
|
u8 flags;
|
|
|
|
u8 reserved2[3];
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 1: ASF Alerts */
|
|
|
|
|
|
|
|
struct acpi_asf_alert {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_asf_header header;
|
|
|
|
u8 assert_mask;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 deassert_mask;
|
|
|
|
u8 alerts;
|
|
|
|
u8 data_length;
|
2007-02-02 09:48:20 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct acpi_asf_alert_data {
|
|
|
|
u8 address;
|
|
|
|
u8 command;
|
|
|
|
u8 mask;
|
|
|
|
u8 value;
|
|
|
|
u8 sensor_type;
|
|
|
|
u8 type;
|
|
|
|
u8 offset;
|
|
|
|
u8 source_type;
|
|
|
|
u8 severity;
|
|
|
|
u8 sensor_number;
|
|
|
|
u8 entity;
|
|
|
|
u8 instance;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* 2: ASF Remote Control */
|
|
|
|
|
|
|
|
struct acpi_asf_remote {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_asf_header header;
|
|
|
|
u8 controls;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 data_length;
|
|
|
|
u16 reserved2;
|
2007-02-02 09:48:20 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct acpi_asf_control_data {
|
|
|
|
u8 function;
|
|
|
|
u8 address;
|
|
|
|
u8 command;
|
|
|
|
u8 value;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* 3: ASF RMCP Boot Options */
|
|
|
|
|
|
|
|
struct acpi_asf_rmcp {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_asf_header header;
|
|
|
|
u8 capabilities[7];
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 completion_code;
|
|
|
|
u32 enterprise_id;
|
|
|
|
u8 command;
|
|
|
|
u16 parameter;
|
|
|
|
u16 boot_options;
|
|
|
|
u16 oem_parameters;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 4: ASF Address */
|
|
|
|
|
|
|
|
struct acpi_asf_address {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_asf_header header;
|
|
|
|
u8 eprom_address;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 devices;
|
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* BERT - Boot Error Record Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_bert {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 region_length; /* Length of the boot error region */
|
|
|
|
u64 address; /* Physical addresss of the error region */
|
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:43 -06:00
|
|
|
/* Boot Error Region */
|
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
struct acpi_bert_region {
|
|
|
|
u32 block_status;
|
|
|
|
u32 raw_data_offset;
|
|
|
|
u32 raw_data_length;
|
|
|
|
u32 data_length;
|
|
|
|
u32 error_severity;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* block_status Flags */
|
|
|
|
|
|
|
|
#define ACPI_BERT_UNCORRECTABLE (1)
|
|
|
|
#define ACPI_BERT_CORRECTABLE (2)
|
|
|
|
#define ACPI_BERT_MULTIPLE_UNCORRECTABLE (4)
|
|
|
|
#define ACPI_BERT_MULTIPLE_CORRECTABLE (8)
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* BOOT - Simple Boot Flag Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_boot {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 cmos_index; /* Index in CMOS RAM for the boot register */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 reserved[3];
|
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* CPEP - Corrected Platform Error Polling table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_cpep {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u64 reserved;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Subtable */
|
|
|
|
|
|
|
|
struct acpi_cpep_polling {
|
|
|
|
u8 type;
|
|
|
|
u8 length;
|
2007-02-02 09:48:18 -07:00
|
|
|
u8 id; /* Processor ID */
|
|
|
|
u8 eid; /* Processor EID */
|
|
|
|
u32 interval; /* Polling interval (msec) */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* DBGP - Debug Port table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_dbgp {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 type; /* 0=full 16550, 1=subset of 16550 */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 reserved[3];
|
|
|
|
struct acpi_generic_address debug_port;
|
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:19 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* DMAR - DMA Remapping table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_dmar {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 width; /* Host Address Width */
|
2007-10-21 17:41:41 -06:00
|
|
|
u8 flags;
|
|
|
|
u8 reserved[10];
|
2007-02-02 09:48:19 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* DMAR subtable header */
|
|
|
|
|
|
|
|
struct acpi_dmar_header {
|
|
|
|
u16 type;
|
|
|
|
u16 length;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for subtable type in struct acpi_dmar_header */
|
|
|
|
|
|
|
|
enum acpi_dmar_type {
|
|
|
|
ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,
|
|
|
|
ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,
|
2007-10-21 17:41:41 -06:00
|
|
|
ACPI_DMAR_TYPE_ATSR = 2,
|
|
|
|
ACPI_DMAR_TYPE_RESERVED = 3 /* 3 and greater are reserved */
|
2007-02-02 09:48:19 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
struct acpi_dmar_device_scope {
|
|
|
|
u8 entry_type;
|
|
|
|
u8 length;
|
2007-10-21 17:41:41 -06:00
|
|
|
u16 reserved;
|
|
|
|
u8 enumeration_id;
|
2007-02-02 09:48:19 -07:00
|
|
|
u8 bus;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for entry_type in struct acpi_dmar_device_scope */
|
|
|
|
|
|
|
|
enum acpi_dmar_scope_type {
|
|
|
|
ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0,
|
|
|
|
ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1,
|
|
|
|
ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2,
|
2007-10-21 17:41:41 -06:00
|
|
|
ACPI_DMAR_SCOPE_TYPE_IOAPIC = 3,
|
|
|
|
ACPI_DMAR_SCOPE_TYPE_HPET = 4,
|
|
|
|
ACPI_DMAR_SCOPE_TYPE_RESERVED = 5 /* 5 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
|
|
|
struct acpi_dmar_pci_path {
|
|
|
|
u8 dev;
|
|
|
|
u8 fn;
|
2007-02-02 09:48:19 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DMAR Sub-tables, correspond to Type in struct acpi_dmar_header
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* 0: Hardware Unit Definition */
|
|
|
|
|
|
|
|
struct acpi_dmar_hardware_unit {
|
|
|
|
struct acpi_dmar_header header;
|
2007-10-21 17:41:41 -06:00
|
|
|
u8 flags;
|
|
|
|
u8 reserved;
|
|
|
|
u16 segment;
|
2007-02-02 09:48:19 -07:00
|
|
|
u64 address; /* Register Base Address */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Flags */
|
|
|
|
|
|
|
|
#define ACPI_DMAR_INCLUDE_ALL (1)
|
|
|
|
|
|
|
|
/* 1: Reserved Memory Defininition */
|
|
|
|
|
|
|
|
struct acpi_dmar_reserved_memory {
|
|
|
|
struct acpi_dmar_header header;
|
2007-10-21 17:41:41 -06:00
|
|
|
u16 reserved;
|
|
|
|
u16 segment;
|
|
|
|
u64 base_address; /* 4_k aligned base address */
|
2007-02-02 09:48:19 -07:00
|
|
|
u64 end_address; /* 4_k aligned limit address */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Flags */
|
|
|
|
|
|
|
|
#define ACPI_DMAR_ALLOW_ALL (1)
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* ECDT - Embedded Controller Boot Resources Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_ecdt {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
struct acpi_generic_address control; /* Address of EC command/status register */
|
|
|
|
struct acpi_generic_address data; /* Address of EC data register */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u32 uid; /* Unique ID - must be same as the EC _UID method */
|
2007-02-02 09:48:18 -07:00
|
|
|
u8 gpe; /* The GPE for the EC */
|
|
|
|
u8 id[1]; /* Full namepath of the EC in the ACPI namespace */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* EINJ - Error Injection Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_einj {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 header_length;
|
|
|
|
u32 reserved;
|
|
|
|
u32 entries;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* EINJ Injection Instruction Entries (actions) */
|
|
|
|
|
|
|
|
struct acpi_einj_entry {
|
|
|
|
struct acpi_whea_header whea_header; /* Common header for WHEA tables */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Action field above */
|
|
|
|
|
|
|
|
enum acpi_einj_actions {
|
|
|
|
ACPI_EINJ_BEGIN_OPERATION = 0,
|
|
|
|
ACPI_EINJ_GET_TRIGGER_TABLE = 1,
|
|
|
|
ACPI_EINJ_SET_ERROR_TYPE = 2,
|
|
|
|
ACPI_EINJ_GET_ERROR_TYPE = 3,
|
|
|
|
ACPI_EINJ_END_OPERATION = 4,
|
|
|
|
ACPI_EINJ_EXECUTE_OPERATION = 5,
|
|
|
|
ACPI_EINJ_CHECK_BUSY_STATUS = 6,
|
|
|
|
ACPI_EINJ_GET_COMMAND_STATUS = 7,
|
|
|
|
ACPI_EINJ_ACTION_RESERVED = 8, /* 8 and greater are reserved */
|
|
|
|
ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Instruction field above */
|
|
|
|
|
|
|
|
enum acpi_einj_instructions {
|
|
|
|
ACPI_EINJ_READ_REGISTER = 0,
|
|
|
|
ACPI_EINJ_READ_REGISTER_VALUE = 1,
|
|
|
|
ACPI_EINJ_WRITE_REGISTER = 2,
|
|
|
|
ACPI_EINJ_WRITE_REGISTER_VALUE = 3,
|
|
|
|
ACPI_EINJ_NOOP = 4,
|
|
|
|
ACPI_EINJ_INSTRUCTION_RESERVED = 5 /* 5 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:43 -06:00
|
|
|
/* EINJ Trigger Error Action Table */
|
|
|
|
|
|
|
|
struct acpi_einj_trigger {
|
|
|
|
u32 header_size;
|
|
|
|
u32 revision;
|
|
|
|
u32 table_size;
|
|
|
|
u32 entry_count;
|
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* ERST - Error Record Serialization Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_erst {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 header_length;
|
|
|
|
u32 reserved;
|
|
|
|
u32 entries;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* ERST Serialization Entries (actions) */
|
|
|
|
|
|
|
|
struct acpi_erst_entry {
|
|
|
|
struct acpi_whea_header whea_header; /* Common header for WHEA tables */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Action field above */
|
|
|
|
|
|
|
|
enum acpi_erst_actions {
|
|
|
|
ACPI_ERST_BEGIN_WRITE_OPERATION = 0,
|
|
|
|
ACPI_ERST_BEGIN_READ_OPERATION = 1,
|
|
|
|
ACPI_ERST_BETGIN_CLEAR_OPERATION = 2,
|
|
|
|
ACPI_ERST_END_OPERATION = 3,
|
|
|
|
ACPI_ERST_SET_RECORD_OFFSET = 4,
|
|
|
|
ACPI_ERST_EXECUTE_OPERATION = 5,
|
|
|
|
ACPI_ERST_CHECK_BUSY_STATUS = 6,
|
|
|
|
ACPI_ERST_GET_COMMAND_STATUS = 7,
|
|
|
|
ACPI_ERST_GET_RECORD_IDENTIFIER = 8,
|
|
|
|
ACPI_ERST_SET_RECORD_IDENTIFIER = 9,
|
|
|
|
ACPI_ERST_GET_RECORD_COUNT = 10,
|
|
|
|
ACPI_ERST_BEGIN_DUMMY_WRIITE = 11,
|
|
|
|
ACPI_ERST_NOT_USED = 12,
|
|
|
|
ACPI_ERST_GET_ERROR_RANGE = 13,
|
|
|
|
ACPI_ERST_GET_ERROR_LENGTH = 14,
|
|
|
|
ACPI_ERST_GET_ERROR_ATTRIBUTES = 15,
|
|
|
|
ACPI_ERST_ACTION_RESERVED = 16 /* 16 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Instruction field above */
|
|
|
|
|
|
|
|
enum acpi_erst_instructions {
|
|
|
|
ACPI_ERST_READ_REGISTER = 0,
|
|
|
|
ACPI_ERST_READ_REGISTER_VALUE = 1,
|
|
|
|
ACPI_ERST_WRITE_REGISTER = 2,
|
|
|
|
ACPI_ERST_WRITE_REGISTER_VALUE = 3,
|
|
|
|
ACPI_ERST_NOOP = 4,
|
|
|
|
ACPI_ERST_LOAD_VAR1 = 5,
|
|
|
|
ACPI_ERST_LOAD_VAR2 = 6,
|
|
|
|
ACPI_ERST_STORE_VAR1 = 7,
|
|
|
|
ACPI_ERST_ADD = 8,
|
|
|
|
ACPI_ERST_SUBTRACT = 9,
|
|
|
|
ACPI_ERST_ADD_VALUE = 10,
|
|
|
|
ACPI_ERST_SUBTRACT_VALUE = 11,
|
|
|
|
ACPI_ERST_STALL = 12,
|
|
|
|
ACPI_ERST_STALL_WHILE_TRUE = 13,
|
|
|
|
ACPI_ERST_SKIP_NEXT_IF_TRUE = 14,
|
|
|
|
ACPI_ERST_GOTO = 15,
|
|
|
|
ACPI_ERST_SET_SRC_ADDRESS_BASE = 16,
|
|
|
|
ACPI_ERST_SET_DST_ADDRESS_BASE = 17,
|
|
|
|
ACPI_ERST_MOVE_DATA = 18,
|
|
|
|
ACPI_ERST_INSTRUCTION_RESERVED = 19 /* 19 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* HEST - Hardware Error Source Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_hest {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 error_source_count;
|
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:43 -06:00
|
|
|
/* HEST subtable header */
|
|
|
|
|
|
|
|
struct acpi_hest_header {
|
|
|
|
u16 type;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Type field above for subtables */
|
|
|
|
|
|
|
|
enum acpi_hest_types {
|
|
|
|
ACPI_HEST_TYPE_XPF_MACHINE_CHECK = 0,
|
|
|
|
ACPI_HEST_TYPE_XPF_CORRECTED_MACHINE_CHECK = 1,
|
|
|
|
ACPI_HEST_TYPE_XPF_UNUSED = 2,
|
|
|
|
ACPI_HEST_TYPE_XPF_NON_MASKABLE_INTERRUPT = 3,
|
|
|
|
ACPI_HEST_TYPE_IPF_CORRECTED_MACHINE_CHECK = 4,
|
|
|
|
ACPI_HEST_TYPE_IPF_CORRECTED_PLATFORM_ERROR = 5,
|
|
|
|
ACPI_HEST_TYPE_AER_ROOT_PORT = 6,
|
|
|
|
ACPI_HEST_TYPE_AER_ENDPOINT = 7,
|
|
|
|
ACPI_HEST_TYPE_AER_BRIDGE = 8,
|
|
|
|
ACPI_HEST_TYPE_GENERIC_HARDWARE_ERROR_SOURCE = 9,
|
|
|
|
ACPI_HEST_TYPE_RESERVED = 10 /* 10 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* HEST Sub-subtables
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* XPF Machine Check Error Bank */
|
|
|
|
|
|
|
|
struct acpi_hest_xpf_error_bank {
|
|
|
|
u8 bank_number;
|
|
|
|
u8 clear_status_on_init;
|
|
|
|
u8 status_format;
|
|
|
|
u8 config_write_enable;
|
|
|
|
u32 control_register;
|
|
|
|
u64 control_init_data;
|
|
|
|
u32 status_register;
|
|
|
|
u32 address_register;
|
|
|
|
u32 misc_register;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Generic Error Status */
|
|
|
|
|
|
|
|
struct acpi_hest_generic_status {
|
|
|
|
u32 block_status;
|
|
|
|
u32 raw_data_offset;
|
|
|
|
u32 raw_data_length;
|
|
|
|
u32 data_length;
|
|
|
|
u32 error_severity;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Generic Error Data */
|
|
|
|
|
|
|
|
struct acpi_hest_generic_data {
|
|
|
|
u8 section_type[16];
|
|
|
|
u32 error_severity;
|
|
|
|
u16 revision;
|
|
|
|
u8 validation_bits;
|
|
|
|
u8 flags;
|
|
|
|
u32 error_data_length;
|
|
|
|
u8 fru_id[16];
|
|
|
|
u8 fru_text[20];
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Common HEST structure for PCI/AER types below (6,7,8) */
|
|
|
|
|
|
|
|
struct acpi_hest_aer_common {
|
|
|
|
u16 source_id;
|
|
|
|
u16 config_write_enable;
|
|
|
|
u8 flags;
|
|
|
|
u8 enabled;
|
|
|
|
u32 records_to_pre_allocate;
|
|
|
|
u32 max_sections_per_record;
|
|
|
|
u32 bus;
|
|
|
|
u16 device;
|
|
|
|
u16 function;
|
|
|
|
u16 device_control;
|
|
|
|
u16 reserved;
|
|
|
|
u32 uncorrectable_error_mask;
|
|
|
|
u32 uncorrectable_error_severity;
|
|
|
|
u32 correctable_error_mask;
|
|
|
|
u32 advanced_error_cababilities;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Hardware Error Notification */
|
|
|
|
|
|
|
|
struct acpi_hest_notify {
|
|
|
|
u8 type;
|
|
|
|
u8 length;
|
|
|
|
u16 config_write_enable;
|
|
|
|
u32 poll_interval;
|
|
|
|
u32 vector;
|
|
|
|
u32 polling_threshold_value;
|
|
|
|
u32 polling_threshold_window;
|
|
|
|
u32 error_threshold_value;
|
|
|
|
u32 error_threshold_window;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Notify Type field above */
|
|
|
|
|
|
|
|
enum acpi_hest_notify_types {
|
|
|
|
ACPI_HEST_NOTIFY_POLLED = 0,
|
|
|
|
ACPI_HEST_NOTIFY_EXTERNAL = 1,
|
|
|
|
ACPI_HEST_NOTIFY_LOCAL = 2,
|
|
|
|
ACPI_HEST_NOTIFY_SCI = 3,
|
|
|
|
ACPI_HEST_NOTIFY_NMI = 4,
|
|
|
|
ACPI_HEST_NOTIFY_RESERVED = 5 /* 5 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* HEST subtables
|
|
|
|
*
|
|
|
|
* From WHEA Design Document, 16 May 2007.
|
|
|
|
* Note: There is no subtable type 2 in this version of the document,
|
|
|
|
* and there are two different subtable type 3s.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* 0: XPF Machine Check Exception */
|
|
|
|
|
|
|
|
struct acpi_hest_xpf_machine_check {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
u16 source_id;
|
|
|
|
u16 config_write_enable;
|
|
|
|
u8 flags;
|
|
|
|
u8 reserved1;
|
|
|
|
u32 records_to_pre_allocate;
|
|
|
|
u32 max_sections_per_record;
|
|
|
|
u64 global_capability_data;
|
|
|
|
u64 global_control_data;
|
|
|
|
u8 num_hardware_banks;
|
|
|
|
u8 reserved2[7];
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 1: XPF Corrected Machine Check */
|
|
|
|
|
|
|
|
struct acpi_table_hest_xpf_corrected {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
u16 source_id;
|
|
|
|
u16 config_write_enable;
|
|
|
|
u8 flags;
|
|
|
|
u8 enabled;
|
|
|
|
u32 records_to_pre_allocate;
|
|
|
|
u32 max_sections_per_record;
|
|
|
|
struct acpi_hest_notify notify;
|
|
|
|
u8 num_hardware_banks;
|
|
|
|
u8 reserved[3];
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 3: XPF Non-Maskable Interrupt */
|
|
|
|
|
|
|
|
struct acpi_hest_xpf_nmi {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
u16 source_id;
|
|
|
|
u32 reserved;
|
|
|
|
u32 records_to_pre_allocate;
|
|
|
|
u32 max_sections_per_record;
|
|
|
|
u32 max_raw_data_length;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 4: IPF Corrected Machine Check */
|
|
|
|
|
|
|
|
struct acpi_hest_ipf_corrected {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
u8 enabled;
|
|
|
|
u8 reserved;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 5: IPF Corrected Platform Error */
|
|
|
|
|
|
|
|
struct acpi_hest_ipf_corrected_platform {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
u8 enabled;
|
|
|
|
u8 reserved;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 6: PCI Express Root Port AER */
|
|
|
|
|
|
|
|
struct acpi_hest_aer_root {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
struct acpi_hest_aer_common aer;
|
|
|
|
u32 root_error_command;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 7: PCI Express AER (AER Endpoint) */
|
|
|
|
|
|
|
|
struct acpi_hest_aer {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
struct acpi_hest_aer_common aer;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 8: PCI Express/PCI-X Bridge AER */
|
|
|
|
|
|
|
|
struct acpi_hest_aer_bridge {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
struct acpi_hest_aer_common aer;
|
|
|
|
u32 secondary_uncorrectable_error_mask;
|
|
|
|
u32 secondary_uncorrectable_error_severity;
|
|
|
|
u32 secondary_advanced_capabilities;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 9: Generic Hardware Error Source */
|
|
|
|
|
|
|
|
struct acpi_hest_generic {
|
|
|
|
struct acpi_hest_header header;
|
|
|
|
u16 source_id;
|
|
|
|
u16 related_source_id;
|
|
|
|
u8 config_write_enable;
|
|
|
|
u8 enabled;
|
|
|
|
u32 records_to_pre_allocate;
|
|
|
|
u32 max_sections_per_record;
|
|
|
|
u32 max_raw_data_length;
|
|
|
|
struct acpi_generic_address error_status_address;
|
|
|
|
struct acpi_hest_notify notify;
|
|
|
|
u32 error_status_block_length;
|
|
|
|
};
|
2008-04-10 09:06:42 -06:00
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* HPET - High Precision Event Timer table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_hpet {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 id; /* Hardware ID of event timer block */
|
|
|
|
struct acpi_generic_address address; /* Address of event timer block */
|
|
|
|
u8 sequence; /* HPET sequence number */
|
|
|
|
u16 minimum_tick; /* Main counter min tick, periodic mode */
|
|
|
|
u8 flags;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/*! Flags */
|
|
|
|
|
|
|
|
#define ACPI_HPET_PAGE_PROTECT (1) /* 00: No page protection */
|
|
|
|
#define ACPI_HPET_PAGE_PROTECT_4 (1<<1) /* 01: 4KB page protected */
|
|
|
|
#define ACPI_HPET_PAGE_PROTECT_64 (1<<2) /* 02: 64KB page protected */
|
|
|
|
|
|
|
|
/*! [End] no source code translation !*/
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
2008-04-10 09:06:43 -06:00
|
|
|
* IBFT - Boot Firmware Table
|
2008-04-10 09:06:42 -06:00
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_ibft {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 reserved[12];
|
|
|
|
};
|
|
|
|
|
|
|
|
/* IBFT common subtable header */
|
|
|
|
|
|
|
|
struct acpi_ibft_header {
|
|
|
|
u8 type;
|
|
|
|
u8 version;
|
|
|
|
u16 length;
|
|
|
|
u8 index;
|
|
|
|
u8 flags;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Type field above */
|
|
|
|
|
|
|
|
enum acpi_ibft_type {
|
|
|
|
ACPI_IBFT_TYPE_NOT_USED = 0,
|
|
|
|
ACPI_IBFT_TYPE_CONTROL = 1,
|
|
|
|
ACPI_IBFT_TYPE_INITIATOR = 2,
|
|
|
|
ACPI_IBFT_TYPE_NIC = 3,
|
|
|
|
ACPI_IBFT_TYPE_TARGET = 4,
|
|
|
|
ACPI_IBFT_TYPE_EXTENSIONS = 5,
|
|
|
|
ACPI_IBFT_TYPE_RESERVED = 6 /* 6 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* IBFT subtables */
|
|
|
|
|
|
|
|
struct acpi_ibft_control {
|
|
|
|
struct acpi_ibft_header header;
|
|
|
|
u16 extensions;
|
|
|
|
u16 initiator_offset;
|
|
|
|
u16 nic0_offset;
|
|
|
|
u16 target0_offset;
|
|
|
|
u16 nic1_offset;
|
|
|
|
u16 target1_offset;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct acpi_ibft_initiator {
|
|
|
|
struct acpi_ibft_header header;
|
|
|
|
u8 sns_server[16];
|
|
|
|
u8 slp_server[16];
|
|
|
|
u8 primary_server[16];
|
|
|
|
u8 secondary_server[16];
|
|
|
|
u16 name_length;
|
|
|
|
u16 name_offset;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct acpi_ibft_nic {
|
|
|
|
struct acpi_ibft_header header;
|
|
|
|
u8 ip_address[16];
|
|
|
|
u8 subnet_mask_prefix;
|
|
|
|
u8 origin;
|
|
|
|
u8 gateway[16];
|
|
|
|
u8 primary_dns[16];
|
|
|
|
u8 secondary_dns[16];
|
|
|
|
u8 dhcp[16];
|
|
|
|
u16 vlan;
|
|
|
|
u8 mac_address[6];
|
|
|
|
u16 pci_address;
|
|
|
|
u16 name_length;
|
|
|
|
u16 name_offset;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct acpi_ibft_target {
|
|
|
|
struct acpi_ibft_header header;
|
|
|
|
u8 target_ip_address[16];
|
|
|
|
u16 target_ip_socket;
|
|
|
|
u8 target_boot_lun[8];
|
|
|
|
u8 chap_type;
|
|
|
|
u8 nic_association;
|
|
|
|
u16 target_name_length;
|
|
|
|
u16 target_name_offset;
|
|
|
|
u16 chap_name_length;
|
|
|
|
u16 chap_name_offset;
|
|
|
|
u16 chap_secret_length;
|
|
|
|
u16 chap_secret_offset;
|
|
|
|
u16 reverse_chap_name_length;
|
|
|
|
u16 reverse_chap_name_offset;
|
|
|
|
u16 reverse_chap_secret_length;
|
|
|
|
u16 reverse_chap_secret_offset;
|
|
|
|
};
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* MADT - Multiple APIC Description Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_madt {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 address; /* Physical address of local APIC */
|
|
|
|
u32 flags;
|
2005-04-16 16:20:36 -06:00
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Flags */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
#define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Values for PCATCompat flag */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
#define ACPI_MADT_DUAL_PIC 0
|
|
|
|
#define ACPI_MADT_MULTIPLE_APIC 1
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Values for subtable type in struct acpi_subtable_header */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
enum acpi_madt_type {
|
|
|
|
ACPI_MADT_TYPE_LOCAL_APIC = 0,
|
|
|
|
ACPI_MADT_TYPE_IO_APIC = 1,
|
|
|
|
ACPI_MADT_TYPE_INTERRUPT_OVERRIDE = 2,
|
|
|
|
ACPI_MADT_TYPE_NMI_SOURCE = 3,
|
|
|
|
ACPI_MADT_TYPE_LOCAL_APIC_NMI = 4,
|
|
|
|
ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE = 5,
|
|
|
|
ACPI_MADT_TYPE_IO_SAPIC = 6,
|
|
|
|
ACPI_MADT_TYPE_LOCAL_SAPIC = 7,
|
|
|
|
ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8,
|
|
|
|
ACPI_MADT_TYPE_RESERVED = 9 /* 9 and greater are reserved */
|
|
|
|
};
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
/*
|
2007-02-02 09:48:18 -07:00
|
|
|
* MADT Sub-tables, correspond to Type in struct acpi_subtable_header
|
2005-04-16 16:20:36 -06:00
|
|
|
*/
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* 0: Processor Local APIC */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_local_apic {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u8 processor_id; /* ACPI processor id */
|
|
|
|
u8 id; /* Processor's local APIC id */
|
|
|
|
u32 lapic_flags;
|
|
|
|
};
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
|
|
|
/* 1: IO APIC */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_io_apic {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u8 id; /* I/O APIC ID */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 reserved; /* Reserved - must be zero */
|
|
|
|
u32 address; /* APIC physical address */
|
2007-02-02 09:48:18 -07:00
|
|
|
u32 global_irq_base; /* Global system interrupt where INTI lines start */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* 2: Interrupt Override */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_interrupt_override {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u8 bus; /* 0 - ISA */
|
|
|
|
u8 source_irq; /* Interrupt source (IRQ) */
|
|
|
|
u32 global_irq; /* Global system interrupt */
|
|
|
|
u16 inti_flags;
|
|
|
|
};
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* 3: NMI Source */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_nmi_source {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u16 inti_flags;
|
|
|
|
u32 global_irq; /* Global system interrupt */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* 4: Local APIC NMI */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_local_apic_nmi {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u8 processor_id; /* ACPI processor id */
|
|
|
|
u16 inti_flags;
|
|
|
|
u8 lint; /* LINTn to which NMI is connected */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* 5: Address Override */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_local_apic_override {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u16 reserved; /* Reserved, must be zero */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u64 address; /* APIC physical address */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 6: I/O Sapic */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_io_sapic {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u8 id; /* I/O SAPIC ID */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 reserved; /* Reserved, must be zero */
|
2007-02-02 09:48:18 -07:00
|
|
|
u32 global_irq_base; /* Global interrupt for SAPIC start */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u64 address; /* SAPIC physical address */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* 7: Local Sapic */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_local_sapic {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u8 processor_id; /* ACPI processor id */
|
|
|
|
u8 id; /* SAPIC ID */
|
|
|
|
u8 eid; /* SAPIC EID */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 reserved[3]; /* Reserved, must be zero */
|
2007-02-02 09:48:18 -07:00
|
|
|
u32 lapic_flags;
|
|
|
|
u32 uid; /* Numeric UID - ACPI 3.0 */
|
|
|
|
char uid_string[1]; /* String UID - ACPI 3.0 */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/* 8: Platform Interrupt Source */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_madt_interrupt_source {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u16 inti_flags;
|
|
|
|
u8 type; /* 1=PMI, 2=INIT, 3=corrected */
|
|
|
|
u8 id; /* Processor ID */
|
|
|
|
u8 eid; /* Processor EID */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 io_sapic_vector; /* Vector value for PMI interrupts */
|
2007-02-02 09:48:18 -07:00
|
|
|
u32 global_irq; /* Global system interrupt */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u32 flags; /* Interrupt Source Flags */
|
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Flags field above */
|
|
|
|
|
|
|
|
#define ACPI_MADT_CPEI_OVERRIDE (1)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Common flags fields for MADT subtables
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* MADT Local APIC flags (lapic_flags) */
|
|
|
|
|
|
|
|
#define ACPI_MADT_ENABLED (1) /* 00: Processor is usable if set */
|
|
|
|
|
|
|
|
/* MADT MPS INTI flags (inti_flags) */
|
|
|
|
|
|
|
|
#define ACPI_MADT_POLARITY_MASK (3) /* 00-01: Polarity of APIC I/O input signals */
|
|
|
|
#define ACPI_MADT_TRIGGER_MASK (3<<2) /* 02-03: Trigger mode of APIC input signals */
|
|
|
|
|
|
|
|
/* Values for MPS INTI flags */
|
|
|
|
|
|
|
|
#define ACPI_MADT_POLARITY_CONFORMS 0
|
|
|
|
#define ACPI_MADT_POLARITY_ACTIVE_HIGH 1
|
|
|
|
#define ACPI_MADT_POLARITY_RESERVED 2
|
|
|
|
#define ACPI_MADT_POLARITY_ACTIVE_LOW 3
|
|
|
|
|
|
|
|
#define ACPI_MADT_TRIGGER_CONFORMS (0)
|
|
|
|
#define ACPI_MADT_TRIGGER_EDGE (1<<2)
|
|
|
|
#define ACPI_MADT_TRIGGER_RESERVED (2<<2)
|
|
|
|
#define ACPI_MADT_TRIGGER_LEVEL (3<<2)
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* MCFG - PCI Memory Mapped Configuration table and sub-table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_mcfg {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 reserved[8];
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Subtable */
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
struct acpi_mcfg_allocation {
|
2007-02-02 09:48:18 -07:00
|
|
|
u64 address; /* Base address, processor-relative */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u16 pci_segment; /* PCI segment group number */
|
|
|
|
u8 start_bus_number; /* Starting PCI Bus number */
|
|
|
|
u8 end_bus_number; /* Final PCI Bus number */
|
|
|
|
u32 reserved;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* SBST - Smart Battery Specification Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_sbst {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 warning_level;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u32 low_level;
|
|
|
|
u32 critical_level;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* SLIT - System Locality Distance Information Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_slit {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u64 locality_count;
|
|
|
|
u8 entry[1]; /* Real size = localities^2 */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* SPCR - Serial Port Console Redirection table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_spcr {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 interface_type; /* 0=full 16550, 1=subset of 16550 */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 reserved[3];
|
|
|
|
struct acpi_generic_address serial_port;
|
|
|
|
u8 interrupt_type;
|
|
|
|
u8 pc_interrupt;
|
|
|
|
u32 interrupt;
|
|
|
|
u8 baud_rate;
|
|
|
|
u8 parity;
|
|
|
|
u8 stop_bits;
|
|
|
|
u8 flow_control;
|
|
|
|
u8 terminal_type;
|
2007-02-02 09:48:18 -07:00
|
|
|
u8 reserved1;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u16 pci_device_id;
|
|
|
|
u16 pci_vendor_id;
|
|
|
|
u8 pci_bus;
|
|
|
|
u8 pci_device;
|
|
|
|
u8 pci_function;
|
|
|
|
u32 pci_flags;
|
|
|
|
u8 pci_segment;
|
2007-02-02 09:48:18 -07:00
|
|
|
u32 reserved2;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* SPMI - Server Platform Management Interface table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_spmi {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 reserved;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 interface_type;
|
|
|
|
u16 spec_revision; /* Version of IPMI */
|
|
|
|
u8 interrupt_type;
|
|
|
|
u8 gpe_number; /* GPE assigned */
|
2007-02-02 09:48:18 -07:00
|
|
|
u8 reserved1;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 pci_device_flag;
|
|
|
|
u32 interrupt;
|
|
|
|
struct acpi_generic_address ipmi_register;
|
|
|
|
u8 pci_segment;
|
|
|
|
u8 pci_bus;
|
|
|
|
u8 pci_device;
|
|
|
|
u8 pci_function;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* SRAT - System Resource Affinity Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_srat {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 table_revision; /* Must be value '1' */
|
|
|
|
u64 reserved; /* Reserved, must be zero */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Values for subtable type in struct acpi_subtable_header */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
enum acpi_srat_type {
|
|
|
|
ACPI_SRAT_TYPE_CPU_AFFINITY = 0,
|
|
|
|
ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1,
|
|
|
|
ACPI_SRAT_TYPE_RESERVED = 2
|
|
|
|
};
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
|
|
|
/* SRAT sub-tables */
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_srat_cpu_affinity {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u8 proximity_domain_lo;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 apic_id;
|
2007-02-02 09:48:18 -07:00
|
|
|
u32 flags;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 local_sapic_eid;
|
|
|
|
u8 proximity_domain_hi[3];
|
2007-02-02 09:48:18 -07:00
|
|
|
u32 reserved; /* Reserved, must be zero */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Flags */
|
|
|
|
|
|
|
|
#define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */
|
|
|
|
|
|
|
|
struct acpi_srat_mem_affinity {
|
|
|
|
struct acpi_subtable_header header;
|
|
|
|
u32 proximity_domain;
|
|
|
|
u16 reserved; /* Reserved, must be zero */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u64 base_address;
|
2007-02-02 09:48:18 -07:00
|
|
|
u64 length;
|
|
|
|
u32 memory_type; /* See acpi_address_range_id */
|
|
|
|
u32 flags;
|
|
|
|
u64 reserved1; /* Reserved, must be zero */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Flags */
|
2005-07-07 22:00:00 -06:00
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
#define ACPI_SRAT_MEM_ENABLED (1) /* 00: Use affinity structure */
|
|
|
|
#define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */
|
|
|
|
#define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */
|
2005-07-07 22:00:00 -06:00
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* TCPA - Trusted Computing Platform Alliance table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_tcpa {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u16 reserved;
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u32 max_log_length; /* Maximum length for the event log area */
|
|
|
|
u64 log_address; /* Address of the event log area */
|
2005-04-16 16:20:36 -06:00
|
|
|
};
|
|
|
|
|
2008-04-10 09:06:42 -06:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* UEFI - UEFI Boot optimization Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_uefi {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u8 identifier[16]; /* UUID identifier */
|
|
|
|
u16 data_offset; /* Offset of remaining data in table */
|
|
|
|
u8 data;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* WDAT - Watchdog Action Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_wdat {
|
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 header_length; /* Watchdog Header Length */
|
|
|
|
u16 pci_segment; /* PCI Segment number */
|
|
|
|
u8 pci_bus; /* PCI Bus number */
|
|
|
|
u8 pci_device; /* PCI Device number */
|
|
|
|
u8 pci_function; /* PCI Function number */
|
|
|
|
u8 reserved[3];
|
|
|
|
u32 timer_period; /* Period of one timer count (msec) */
|
|
|
|
u32 max_count; /* Maximum counter value supported */
|
|
|
|
u32 min_count; /* Minimum counter value */
|
|
|
|
u8 flags;
|
|
|
|
u8 reserved2[3];
|
|
|
|
u32 entries; /* Number of watchdog entries that follow */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* WDAT Instruction Entries (actions) */
|
|
|
|
|
|
|
|
struct acpi_wdat_entry {
|
|
|
|
struct acpi_whea_header whea_header; /* Common header for WHEA tables */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Action field above */
|
|
|
|
|
|
|
|
enum acpi_wdat_actions {
|
|
|
|
ACPI_WDAT_RESET = 1,
|
|
|
|
ACPI_WDAT_GET_CURRENT_COUNTDOWN = 4,
|
|
|
|
ACPI_WDAT_GET_COUNTDOWN = 5,
|
|
|
|
ACPI_WDAT_SET_COUNTDOWN = 6,
|
|
|
|
ACPI_WDAT_GET_RUNNING_STATE = 8,
|
|
|
|
ACPI_WDAT_SET_RUNNING_STATE = 9,
|
|
|
|
ACPI_WDAT_GET_STOPPED_STATE = 10,
|
|
|
|
ACPI_WDAT_SET_STOPPED_STATE = 11,
|
|
|
|
ACPI_WDAT_GET_REBOOT = 16,
|
|
|
|
ACPI_WDAT_SET_REBOOT = 17,
|
|
|
|
ACPI_WDAT_GET_SHUTDOWN = 18,
|
|
|
|
ACPI_WDAT_SET_SHUTDOWN = 19,
|
|
|
|
ACPI_WDAT_GET_STATUS = 32,
|
|
|
|
ACPI_WDAT_SET_STATUS = 33,
|
|
|
|
ACPI_WDAT_ACTION_RESERVED = 34 /* 34 and greater are reserved */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Values for Instruction field above */
|
|
|
|
|
|
|
|
enum acpi_wdat_instructions {
|
|
|
|
ACPI_WDAT_READ_VALUE = 0,
|
|
|
|
ACPI_WDAT_READ_COUNTDOWN = 1,
|
|
|
|
ACPI_WDAT_WRITE_VALUE = 2,
|
|
|
|
ACPI_WDAT_WRITE_COUNTDOWN = 3,
|
|
|
|
ACPI_WDAT_INSTRUCTION_RESERVED = 4, /* 4 and greater are reserved */
|
|
|
|
ACPI_WDAT_PRESERVE_REGISTER = 0x80 /* Except for this value */
|
|
|
|
};
|
|
|
|
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
/*******************************************************************************
|
|
|
|
*
|
|
|
|
* WDRT - Watchdog Resource Table
|
|
|
|
*
|
|
|
|
******************************************************************************/
|
|
|
|
|
|
|
|
struct acpi_table_wdrt {
|
2007-02-02 09:48:18 -07:00
|
|
|
struct acpi_table_header header; /* Common ACPI table header */
|
|
|
|
u32 header_length; /* Watchdog Header Length */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
u8 pci_segment; /* PCI Segment number */
|
|
|
|
u8 pci_bus; /* PCI Bus number */
|
|
|
|
u8 pci_device; /* PCI Device number */
|
|
|
|
u8 pci_function; /* PCI Function number */
|
|
|
|
u32 timer_period; /* Period of one timer count (msec) */
|
|
|
|
u32 max_count; /* Maximum counter value supported */
|
|
|
|
u32 min_count; /* Minimum counter value */
|
|
|
|
u8 flags;
|
|
|
|
u8 reserved[3];
|
|
|
|
u32 entries; /* Number of watchdog entries that follow */
|
|
|
|
};
|
|
|
|
|
2007-02-02 09:48:18 -07:00
|
|
|
/* Flags */
|
|
|
|
|
|
|
|
#define ACPI_WDRT_TIMER_ENABLED (1) /* 00: Timer enabled */
|
ACPI: ACPICA 20060331
Implemented header file support for the following
additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR,
SPMI, TCPA, and WDRT. With this support, all current and
known ACPI tables are now defined in the ACPICA headers and
are available for use by device drivers and other software.
Implemented support to allow tables that contain ACPI
names with invalid characters to be loaded. Previously,
this would cause the table load to fail, but since
there are several known cases of such tables on
existing machines, this change was made to enable
ACPI support for them. Also, this matches the
behavior of the Microsoft ACPI implementation.
https://bugzilla.novell.com/show_bug.cgi?id=147621
Fixed a couple regressions introduced during the memory
optimization in the 20060317 release. The namespace
node definition required additional reorganization and
an internal datatype that had been changed to 8-bit was
restored to 32-bit. (Valery Podrezov)
Fixed a problem where a null pointer passed to
acpi_ut_delete_generic_state() could be passed through
to acpi_os_release_object which is unexpected. Such
null pointers are now trapped and ignored, matching
the behavior of the previous implementation before the
deployment of acpi_os_release_object(). (Valery Podrezov,
Fiodor Suietov)
Fixed a memory mapping leak during the deletion of
a SystemMemory operation region where a cached memory
mapping was not deleted. This became a noticeable problem
for operation regions that are defined within frequently
used control methods. (Dana Meyers)
Reorganized the ACPI table header files into two main
files: one for the ACPI tables consumed by the ACPICA core,
and another for the miscellaneous ACPI tables that are
consumed by the drivers and other software. The various
FADT definitions were merged into one common section and
three different tables (ACPI 1.0, 1.0+, and 2.0)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-30 22:00:00 -07:00
|
|
|
|
|
|
|
/* Reset to default packing */
|
|
|
|
|
2005-04-16 16:20:36 -06:00
|
|
|
#pragma pack()
|
|
|
|
|
2005-08-04 22:44:28 -06:00
|
|
|
#endif /* __ACTBL1_H__ */
|