redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/gpu/drm/Kconfig

350 lines
9.1 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
video gfx: merge kconfig menus Move AGP and DRM menus into the video graphics support menu. They use 'menuconfig' so that they can all be disabled with one selection. Make the console menu use 'menuconfig' so that it can all be disabled with one selection. Make the frame buffer menu use 'menuconfig' so that it can all be disabled with one selection. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 02:29:39 -06:00
menuconfig DRM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
drm: allow to use mmuless SoC Some SoC without MMU have display driver where a drm/kms driver could be implemented. Before doing such kind of thing drm/kms must allow to use mmuless devices. This patch propose to remove MMU configuration flag and add a cma helper function to help implementing mmuless display driver version 4: - add documentation about drm_gem_cma_get_unmapped_area() - stub it MMU case Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Use recommended struct member references in kernel-doc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483521177-21794-4-git-send-email-benjamin.gaignard@linaro.org
2017-01-04 02:12:57 -07:00
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
drm: Add HDMI infoframe helpers Add a generic helper to fill in an HDMI AVI infoframe with data extracted from a DRM display mode. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-11-21 07:31:35 -07:00
select HDMI
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 02:08:32 -06:00
select FB_CMDLINE
drm: kconfig have drm core select i2c for kms Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-13 01:21:08 -07:00
select I2C
select I2C_ALGOBIT
drm: base prime/dma-buf support (v5) This adds the basic drm dma-buf interface layer, called PRIME. This commit doesn't add any driver support, it is simply and agreed upon starting point so we can work towards merging driver support for the next merge window. Current drivers with work done are nouveau, i915, udl, exynos and omap. The main APIs exposed to userspace allow translating a 32-bit object handle to a file descriptor, and a file descriptor to a 32-bit object handle. The flags value is currently limited to O_CLOEXEC. Acknowledgements: Daniel Vetter: lots of review Rob Clark: cleaned up lots of the internals and did lifetime review. v2: rename some functions after Chris preferred a green shed fix IS_ERR_OR_NULL -> IS_ERR v3: Fix Ville pointed out using buffer + kmalloc v4: add locking as per ickle review v5: allow re-exporting the original dma-buf (Daniel) Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <rob.clark@linaro.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Reviewed-by: Inki Dae <inki.dae@samsung.com> Acked-by: Ben Widawsky <benjamin.widawsky@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-25 08:21:02 -07:00
select DMA_SHARED_BUFFER
drm/fence: add in-fences support There is now a new property called IN_FENCE_FD attached to every plane state that receives sync_file fds from userspace via the atomic commit IOCTL. The fd is then translated to a fence (that may be a fence_array subclass or just a normal fence) and then used by DRM to fence_wait() for all fences in the sync_file to signal. So it only commits when all framebuffers are ready to scanout. v2: Comments by Daniel Vetter: - remove set state->fence = NULL in destroy phase - accept fence -1 as valid and just return 0 - do not call fence_get() - sync_file_fences_get() already calls it - fence_put() if state->fence is already set, in case userspace set the property more than once. v3: WARN_ON if fence is set but state has no FB v4: Comment from Maarten Lankhorst - allow set fence with no related fb v5: rename FENCE_FD to IN_FENCE_FD v6: Comments by Daniel Vetter: - rename plane_state->in_fence back to "fence" - re-introduce WARN_ON if fence set but no fb - rebase after fence -> dma_fence rename v7: Comments by Brian Starkey - set state->fence to NULL when duplicating the state - fail if IN_FENCE_FD was already set v8: rebase against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> [danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-11-15 06:06:39 -07:00
select SYNC_FILE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
the module that's right for your graphics card from the list below.
These modules provide support for synchronization, security, and
DMA transfers. Please see <http://dri.sourceforge.net/> for more
details. You should also select and configure AGP
drm: Add support for platform devices to register as DRM devices Allow platform devices without PCI resources to be DRM devices. [airlied: fixup warnings with dev pointers] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-27 13:40:25 -06:00
(/dev/agpgart) support if it is available for your platform.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
drm: Add MIPI DSI bus support MIPI DSI bus allows to model DSI hosts and DSI peripherals using the Linux driver model. DSI hosts are registered by the DSI host drivers. During registration DSI peripherals will be created from the children of the DSI host's device tree node. Support for registration from board-setup code will be added later when needed. DSI hosts expose operations which can be used by DSI peripheral drivers to access associated devices. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-04 08:35:12 -07:00
config DRM_MIPI_DSI
bool
depends on DRM
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-21 16:10:19 -07:00
config DRM_DP_AUX_CHARDEV
bool "DRM DP AUX Interface"
depends on DRM
help
Choose this option to enable a /dev/drm_dp_auxN node that allows to
read and write values to arbitrary DPCD registers on the DP aux
channel.
drm: Track drm_mm allocators and show leaks on shutdown We can use the kernel's stack tracer and depot to record the allocation site of every drm_mm user. Then on shutdown, as well as warning that allocated nodes still reside with the drm_mm range manager, we can display who allocated them to aide tracking down the leak. v2: Move Kconfig around so it lies underneath the DRM options submenu. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161031090806.20073-1-chris@chris-wilson.co.uk
2016-10-31 03:08:06 -06:00
config DRM_DEBUG_MM
bool "Insert extra checks and debug info into the DRM range managers"
default n
drm: Restrict stackdepot usage to builtin drm.ko I misread the kbuild result thinking that we had missed the include (which we had for completeness anyway), what kbuild was actually warning me about was that depot_save_stack was not exported. Temporarily fix this by only selecting STACKDEPOT iff drm.ko is builtin Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 5705670d0463 ("drm: Track drm_mm allocators and show leaks on shutdown") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-2-chris@chris-wilson.co.uk
2016-11-08 06:19:17 -07:00
depends on DRM=y
drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT 0day continues to complain about trying to save a stacktrace for the users of the drm_mm range allocator. This time, it is that m68k has no save_stack_trace(), which is apparently guarded by STACKTRACE_SUPPORT. Make it depend so! Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161109143906.11057-1-chris@chris-wilson.co.uk
2016-11-09 07:39:06 -07:00
depends on STACKTRACE_SUPPORT
drm: Track drm_mm allocators and show leaks on shutdown We can use the kernel's stack tracer and depot to record the allocation site of every drm_mm user. Then on shutdown, as well as warning that allocated nodes still reside with the drm_mm range manager, we can display who allocated them to aide tracking down the leak. v2: Move Kconfig around so it lies underneath the DRM options submenu. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161031090806.20073-1-chris@chris-wilson.co.uk
2016-10-31 03:08:06 -06:00
select STACKDEPOT
help
Enable allocation tracking of memory manager and leak detection on
shutdown.
Recommended for driver developers only.
If in doubt, say "N".
drm: Add some kselftests for the DRM range manager (struct drm_mm) First we introduce a smattering of infrastructure for writing selftests. The idea is that we have a test module that exercises a particular portion of the exported API, and that module provides a set of tests that can either be run as an ensemble via kselftest or individually via an igt harness (in this case igt/drm_mm). To accommodate selecting individual tests, we export a boolean parameter to control selection of each test - that is hidden inside a bunch of reusable boilerplate macros to keep writing the tests simple. v2: Choose a random random_seed unless one is specified by the user. v3: More parameters to control max_iterations and max_prime of the tests. Testcase: igt/drm_mm Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-7-chris@chris-wilson.co.uk
2016-12-22 01:36:09 -07:00
config DRM_DEBUG_MM_SELFTEST
tristate "kselftests for DRM range manager (struct drm_mm)"
depends on DRM
depends on DEBUG_KERNEL
select PRIME_NUMBERS
select DRM_LIB_RANDOM
default n
help
This option provides a kernel module that can be used to test
the DRM range manager (drm_mm) and its API. This option is not
useful for distributions or general kernels, but only for kernel
developers working on DRM and associated drivers.
If in doubt, say "N".
drm/kms: fix kms helper license + Kconfig Allow the KMS module to work properly, and also rename it to KMS_HELPER so its clearer what its for. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 19:08:32 -06:00
config DRM_KMS_HELPER
drm: split crtc/fb helpers into a separate module I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-06 23:45:33 -06:00
tristate
depends on DRM
drm: Add separate Kconfig option for fbdev helpers For drivers which might want to disable fbdev legacy support. Select the new option in all drivers for now, so this shouldn't result in any change. Drivers need some work anyway to make fbdev support optional (if they have it implemented, that is), so the recommended way to expose this is by adding per-driver options. At least as long as most drivers don't support disabling the fbdev support. v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm driver can already take advantage of this, which allows us to build msm without any fbdev depencies in the kernel! v3: Move the MODULE_* stuff from the fbdev helper file to drm_crtc_helper.c. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Dave Airlie <airlied@linux.ie> Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-08 09:44:47 -06:00
help
CRTC helpers for KMS drivers.
config DRM_KMS_FB_HELPER
bool
depends on DRM_KMS_HELPER
drm: split crtc/fb helpers into a separate module I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-06 23:45:33 -06:00
select FB
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 15:44:16 -07:00
select FRAMEBUFFER_CONSOLE if !EXPERT
drm: select FRAMEBUFFER_CONSOLE_PRIMARY if we have FRAMEBUFFER_CONSOLE Multi-gpu/switcheroo relies on this option to get the console on the correct GPU at bootup, some distros enable it but it seems some get it wrong. cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-04-21 15:51:33 -06:00
select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
drm/fb_helper: Create wrappers for fb_sys_read/write funcs Some drm drivers populate their fb_ops with fb_sys_read/write fb sysfs ops. Create a drm_fb_helper function that wraps around these calls. This is part of an effort to prevent drm drivers from calling fbdev functions directly, in order to make fbdev emulation a top level drm option. v3: - Fix kerneldoc errors v2: - Added kerneldocs - Follow the drm way of aligning of arguments in func definitions - Remove unnecessary checks for non NULL fb_info Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-31 04:51:41 -06:00
select FB_SYS_FOPS
drm/fb_helper: Create wrappers for blit, copyarea and fillrect funcs drm drivers that emulate fbdev populate their fb_fillrect, fb_copyarea and fb_imageblit fb_ops with the help of cfb_* or sys_* fbdev core helper functions. Create drm_fb_helper functions that wrap around these calls. This is part of an effort to prevent drm drivers from calling fbdev functions directly, in order to make fbdev emulation a top level drm option. v3: - Fixed kerneldoc errors v2: - Added kerneldocs - Follow the drm way of aligning of arguments in func definitions - Remove unnecessary checks for non NULL fb_info Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-31 04:51:42 -06:00
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
drm/fb-helper: Add fb_deferred_io support This adds deferred io support to drm_fb_helper. The fbdev framebuffer changes are flushed using the callback (struct drm_framebuffer *)->funcs->dirty() by a dedicated worker ensuring that it always runs in process context. For those wondering why we need to be able to handle atomic calling contexts: Both panic paths and cursor code and fbcon blanking can run from atomic. See commit bcb39af4486be07e896fc374a2336bad3104ae0a Author: Dave Airlie <airlied@redhat.com> Date: Thu Feb 7 11:19:15 2013 +1000 drm/udl: make usage as a console safer for where this was originally discovered. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> [danvet: Augment commit message with why we need to handle atomic contexts.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-4-git-send-email-noralf@tronnes.org
2016-04-28 09:18:33 -06:00
select FB_DEFERRED_IO
drm: split crtc/fb helpers into a separate module I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-06 23:45:33 -06:00
help
drm: Add separate Kconfig option for fbdev helpers For drivers which might want to disable fbdev legacy support. Select the new option in all drivers for now, so this shouldn't result in any change. Drivers need some work anyway to make fbdev support optional (if they have it implemented, that is), so the recommended way to expose this is by adding per-driver options. At least as long as most drivers don't support disabling the fbdev support. v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm driver can already take advantage of this, which allows us to build msm without any fbdev depencies in the kernel! v3: Move the MODULE_* stuff from the fbdev helper file to drm_crtc_helper.c. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Dave Airlie <airlied@linux.ie> Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-08 09:44:47 -06:00
FBDEV helpers for KMS drivers.
drm: split crtc/fb helpers into a separate module I really don't want to have core drm module rely on CONFIG_FB, so this is the easiest answer. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-06 23:45:33 -06:00
drm: Add top level Kconfig option for DRM fbdev emulation Legacy fbdev emulation support via DRM is achieved through KMS FB helpers. Most modesetting drivers enable provide fbdev emulation by default by selecting KMS FB helpers. A few provide a separate Kconfig option for the user to enable or disbale fbdev emulation. Enabling fbdev emulation is finally a distro-level decision. Having a top level Kconfig option for fbdev emulation helps by providing a uniform way to enable/disable fbdev emulation for any modesetting driver. It also lets us remove unnecessary driver specific Kconfig options that causes bloat. With a top level Kconfig in place, we can stub out the fb helper functions when not needed without breaking functionality. Having stub functions also prevents drivers to require wrapping fb helper function calls with #ifdefs. DRM_FBDEV_EMULATION defaults to y since many drivers enable fbdev emulation by default and majority of distributions expect the fbdev interface in the kernel. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-05 00:58:57 -06:00
config DRM_FBDEV_EMULATION
bool "Enable legacy fbdev support for your modesetting driver"
depends on DRM
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
default y
help
Choose this option if you have a need for the legacy fbdev
support. Note that this support also provides the linux console
support on top of your modesetting driver.
If in doubt, say "Y".
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-18 15:37:33 -06:00
config DRM_LOAD_EDID_FIRMWARE
bool "Allow to specify an EDID data set instead of probing for it"
depends on DRM_KMS_HELPER
help
Say Y here, if you want to use EDID data to be loaded from the
/lib/firmware directory or one of the provided built-in
data sets. This may be necessary, if the graphics adapter or
monitor are unable to provide appropriate EDID data. Since this
feature is provided as a workaround for broken hardware, the
default case is N. Details and instructions how to build your own
EDID data are given in Documentation/EDID/HOWTO.txt.
drm: Add the TTM GPU memory manager subsystem. TTM is a GPU memory manager subsystem designed for use with GPU devices with various memory types (On-card VRAM, AGP, PCI apertures etc.). It's essentially a helper library that assists the DRM driver in creating and managing persistent buffer objects. TTM manages placement of data and CPU map setup and teardown on data movement. It can also optionally manage synchronization of data on a per-buffer-object level. TTM takes care to provide an always valid virtual user-space address to a buffer object which makes user-space sub-allocation of big buffer objects feasible. TTM uses a fine-grained per buffer-object locking scheme, taking care to release all relevant locks when waiting for the GPU. Although this implies some locking overhead, it's probably a big win for devices with multiple command submission mechanisms, since the lock contention will be minimal. TTM can be used with whatever user-space interface the driver chooses, including GEM. It's used by the upcoming Radeon KMS DRM driver and is also the GPU memory management core of various new experimental DRM drivers. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-10 07:20:19 -06:00
config DRM_TTM
drm/radeon: introduce kernel modesetting for radeon hardware Add kernel modesetting support to radeon driver, use the ttm memory manager to manage memory and DRM/GEM to provide userspace API. In order to avoid backward compatibility issue and to allow clean design and code the radeon kernel modesetting use different code path than old radeon/drm driver. When kernel modesetting is enabled the IOCTL of radeon/drm driver are considered as invalid and an error message is printed in the log and they return failure. KMS enabled userspace will use new API to talk with the radeon/drm driver. The new API provide functions to create/destroy/share/mmap buffer object which are then managed by the kernel memory manager (here TTM). In order to submit command to the GPU the userspace provide a buffer holding the command stream, along this buffer userspace have to provide a list of buffer object used by the command stream. The kernel radeon driver will then place buffer in GPU accessible memory and will update command stream to reflect the position of the different buffers. The kernel will also perform security check on command stream provided by the user, we want to catch and forbid any illegal use of the GPU such as DMA into random system memory or into memory not owned by the process supplying the command stream. This part of the code is still incomplete and this why we propose that patch as a staging driver addition, future security might forbid current experimental userspace to run. This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX (radeon up to X1950). Works is underway to provide support for R6XX, R7XX and newer hardware (radeon from HD2XXX to HD4XXX). Authors: Jerome Glisse <jglisse@redhat.com> Dave Airlie <airlied@redhat.com> Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-05 06:42:42 -06:00
tristate
drm: allow to use mmuless SoC Some SoC without MMU have display driver where a drm/kms driver could be implemented. Before doing such kind of thing drm/kms must allow to use mmuless devices. This patch propose to remove MMU configuration flag and add a cma helper function to help implementing mmuless display driver version 4: - add documentation about drm_gem_cma_get_unmapped_area() - stub it MMU case Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Use recommended struct member references in kernel-doc.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483521177-21794-4-git-send-email-benjamin.gaignard@linaro.org
2017-01-04 02:12:57 -07:00
depends on DRM && MMU
drm: Add the TTM GPU memory manager subsystem. TTM is a GPU memory manager subsystem designed for use with GPU devices with various memory types (On-card VRAM, AGP, PCI apertures etc.). It's essentially a helper library that assists the DRM driver in creating and managing persistent buffer objects. TTM manages placement of data and CPU map setup and teardown on data movement. It can also optionally manage synchronization of data on a per-buffer-object level. TTM takes care to provide an always valid virtual user-space address to a buffer object which makes user-space sub-allocation of big buffer objects feasible. TTM uses a fine-grained per buffer-object locking scheme, taking care to release all relevant locks when waiting for the GPU. Although this implies some locking overhead, it's probably a big win for devices with multiple command submission mechanisms, since the lock contention will be minimal. TTM can be used with whatever user-space interface the driver chooses, including GEM. It's used by the upcoming Radeon KMS DRM driver and is also the GPU memory management core of various new experimental DRM drivers. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-10 07:20:19 -06:00
help
GPU memory management subsystem for devices with multiple
GPU memory types. Will be enabled automatically if a device driver
uses it.
DRM: Add DRM GEM CMA helper Many embedded drm devices do not have a IOMMU and no dedicated memory for graphics. These devices use CMA (Contiguous Memory Allocator) backed graphics memory. This patch provides helper functions to be able to share the code. The code technically does not depend on CMA as the backend allocator, the name has been chosen because CMA makes for a nice, short but still descriptive function prefix. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> [Make DRM_GEM_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-06-27 07:30:18 -06:00
config DRM_GEM_CMA_HELPER
bool
dma-mapping: always provide the dma_map_ops based implementation Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 16:02:05 -07:00
depends on DRM
DRM: Add DRM GEM CMA helper Many embedded drm devices do not have a IOMMU and no dedicated memory for graphics. These devices use CMA (Contiguous Memory Allocator) backed graphics memory. This patch provides helper functions to be able to share the code. The code technically does not depend on CMA as the backend allocator, the name has been chosen because CMA makes for a nice, short but still descriptive function prefix. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Lars-Peter Clausen <lars@metafoo.de> [Make DRM_GEM_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-06-27 07:30:18 -06:00
help
Choose this if you need the GEM CMA helper functions
DRM: Add DRM KMS/FB CMA helper This patchset introduces a set of helper function for implementing the KMS framebuffer layer for drivers which use the DRM GEM CMA helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> [Make DRM_KMS_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-02 08:37:47 -06:00
config DRM_KMS_CMA_HELPER
bool
dma-mapping: always provide the dma_map_ops based implementation Move the generic implementation to <linux/dma-mapping.h> now that all architectures support it and remove the HAVE_DMA_ATTR Kconfig symbol now that everyone supports them. [valentinrothberg@gmail.com: remove leftovers in Kconfig] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Helge Deller <deller@gmx.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Steven Miao <realmz6@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 16:02:05 -07:00
depends on DRM
DRM: Add DRM KMS/FB CMA helper This patchset introduces a set of helper function for implementing the KMS framebuffer layer for drivers which use the DRM GEM CMA helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> [Make DRM_KMS_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-02 08:37:47 -06:00
select DRM_GEM_CMA_HELPER
drm: Add separate Kconfig option for fbdev helpers For drivers which might want to disable fbdev legacy support. Select the new option in all drivers for now, so this shouldn't result in any change. Drivers need some work anyway to make fbdev support optional (if they have it implemented, that is), so the recommended way to expose this is by adding per-driver options. At least as long as most drivers don't support disabling the fbdev support. v2: Update for new drm drivers msm and rcar-du. Note that Rob's msm driver can already take advantage of this, which allows us to build msm without any fbdev depencies in the kernel! v3: Move the MODULE_* stuff from the fbdev helper file to drm_crtc_helper.c. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Acked-by: Dave Airlie <airlied@linux.ie> Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-08 09:44:47 -06:00
select DRM_KMS_FB_HELPER
DRM: Add DRM KMS/FB CMA helper This patchset introduces a set of helper function for implementing the KMS framebuffer layer for drivers which use the DRM GEM CMA helper function. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> [Make DRM_KMS_CMA_HELPER a boolean Kconfig option] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2012-07-02 08:37:47 -06:00
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
help
Choose this if you need the KMS CMA helper functions
drm: compile drm_vm.c only when needed drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU. Use a new DRM_VM to define when drm_vm.c in needed. stub drm_legacy_vma_flush() to avoid compilation issues version 4: - a "config DRM_VM" in Kconfig Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Fix conflict.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-01-04 02:12:56 -07:00
config DRM_VM
bool
drm: fix MMU dependencies DRM_VM and DRM_LEGACY shouldn't be selected if MMU isn't set. Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484211456-5759-1-git-send-email-benjamin.gaignard@linaro.org
2017-01-12 01:57:36 -07:00
depends on DRM && MMU
drm: compile drm_vm.c only when needed drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU. Use a new DRM_VM to define when drm_vm.c in needed. stub drm_legacy_vma_flush() to avoid compilation issues version 4: - a "config DRM_VM" in Kconfig Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Fix conflict.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-01-04 02:12:56 -07:00
drm/i2c: give i2c it's own Kconfig Move this out of nouveau directory. As we start to add more encoder slaves used by other drivers, it makes sense to put the Kconfig bits in one place. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-01-24 14:46:07 -07:00
source "drivers/gpu/drm/i2c/Kconfig"
drm: Add support for ARM's HDLCD controller. The HDLCD controller is a display controller that supports resolutions up to 4096x4096 pixels. It is present on various development boards produced by ARM Ltd and emulated by the latest Fast Models from the company. Cc: David Airlie <airlied@linux.ie> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> [Kconfig cleanup and !CONFIG_PM fixes] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-02 12:48:39 -06:00
source "drivers/gpu/drm/arm/Kconfig"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
config DRM_RADEON
tristate "ATI Radeon"
drm: fix compilations issues introduced by "drm: allow to use mmuless SoC" Removing MMU configuration flag from DRM make few automatic build failed when they answer yes to all flags. Add asm/vga.h file on Blackfin architecture to not broke compilation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483789151-6603-1-git-send-email-benjamin.gaignard@linaro.org
2017-01-07 04:39:11 -07:00
depends on DRM && PCI && MMU
radeon: Use request_firmware() Loosely based on a patch by Jaswinder Singh Rajput <jaswinderlinux@gmail.com>. KMS support by Dave Airlie <airlied@redhat.com>. For Radeon 100- to 500-series, firmware blobs look like: struct { __be32 datah; __be32 datal; } cp_ucode[256]; For Radeon 600-series, there are two separate firmware blobs: __be32 me_ucode[PM4_UCODE_SIZE * 3]; __be32 pfp_ucode[PFP_UCODE_SIZE]; For Radeon 700-series, likewise: __be32 me_ucode[R700_PM4_UCODE_SIZE]; __be32 pfp_ucode[R700_PFP_UCODE_SIZE]; Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-29 07:53:51 -06:00
select FW_LOADER
drm/kms/radeon: make kms default a runtime option This makes the kms/enable disable a runtime not a build time option. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 19:09:50 -06:00
select DRM_KMS_HELPER
select DRM_TTM
drm/radeon: fix power supply kconfig interaction. radeon needs power supply to get correct PM info so select it at the radeon level not at the kms option. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-20 23:41:20 -06:00
select POWER_SUPPLY
drm/radeon/kms: add support for internal thermal sensors (v3) rv6xx/rv7xx/evergreen families supported; older asics did not have an internal thermal sensor. Note, not all oems use the internal thermal sensor, so it's only exposed in cases where it is used. Note also, that most laptops use an oem specific ACPI solution for GPU thermal information rather than using the internal thermal sensor directly. v2: export millidegrees celsius, use hwmon device properly. v3: fix Kconfig Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-07-02 10:58:16 -06:00
select HWMON
drm/radeon: Deprecate UMS support v2 KMS support is out and stable for a couple of years now and the userspace code has deprecated or abandoned the old UMS interface. So make the KMS interface the default and deprecate the UMS interface in the kernel as well. v2: rebased on alex/drm-next-3.9-wip Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2013-01-21 05:58:46 -07:00
select BACKLIGHT_CLASS_DEVICE
drm/radeon: Select BACKLIGHT_LCD_SUPPORT Explicitly select BACKLIGHT_LCD_SUPPORT to satisfy the direct dependency of BACKLIGHT_CLASS_DEVICE. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-14 04:50:11 -06:00
select BACKLIGHT_LCD_SUPPORT
drm/radeon: use an intervall tree to manage the VMA v2 Scales much better than scanning the address range linearly. v2: store pfn instead of address Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-07-30 09:49:56 -06:00
select INTERVAL_TREE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
help
Choose this option if you have an ATI Radeon graphics card. There
are both PCI and AGP versions. You don't need to choose this to
remove dead Radeon URL This patch removes a dead Radeon URL from two Kconfig files. This isue was noted by Reto Gantenbein <ganto82@gmx.ch> in Kernel Bugzilla #4446. Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-20 12:23:13 -07:00
run the Radeon in plain VGA mode.
drm: run cleanfile across drm tree Signed-off-by: Dave Airlie <airlied@linux.ie>
2007-11-04 19:50:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
If M is selected, the module will be called radeon.
drm/radeon/kms: move radeon KMS on/off switch out of staging. We are happy enough that the KMS driver is stable enough for enough people for the kms enable/disable to leave staging. Distros can now contemplate turning this on. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-31 18:35:47 -07:00
source "drivers/gpu/drm/radeon/Kconfig"
drm/amdgpu: add core driver (v4) This adds the non-asic specific core driver code. v2: remove extra kconfig option v3: implement minor fixes from Fengguang Wu v4: fix cast in amdgpu_ucode.c Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-20 14:55:21 -06:00
config DRM_AMDGPU
tristate "AMD GPU"
drm: fix compilations issues introduced by "drm: allow to use mmuless SoC" Removing MMU configuration flag from DRM make few automatic build failed when they answer yes to all flags. Add asm/vga.h file on Blackfin architecture to not broke compilation. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1483789151-6603-1-git-send-email-benjamin.gaignard@linaro.org
2017-01-07 04:39:11 -07:00
depends on DRM && PCI && MMU
drm/amdgpu: add core driver (v4) This adds the non-asic specific core driver code. v2: remove extra kconfig option v3: implement minor fixes from Fengguang Wu v4: fix cast in amdgpu_ucode.c Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-20 14:55:21 -06:00
select FW_LOADER
select DRM_KMS_HELPER
select DRM_TTM
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
drm/amdgpu: Select BACKLIGHT_LCD_SUPPORT Explicitly select BACKLIGHT_LCD_SUPPORT to satisfy the direct dependency of BACKLIGHT_CLASS_DEVICE. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-08-14 04:50:12 -06:00
select BACKLIGHT_LCD_SUPPORT
drm/amdgpu: add core driver (v4) This adds the non-asic specific core driver code. v2: remove extra kconfig option v3: implement minor fixes from Fengguang Wu v4: fix cast in amdgpu_ucode.c Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-04-20 14:55:21 -06:00
select INTERVAL_TREE
help
Choose this option if you have a recent AMD Radeon graphics card.
If M is selected, the module will be called amdgpu.
source "drivers/gpu/drm/amd/amdgpu/Kconfig"
drm/amd: add ACP driver support This adds the ACP (Audio CoProcessor) IP driver and wires it up to the amdgpu driver. The ACP block provides the DMA engine for i2s based ALSA driver. This is required for audio on APUs that utilize an i2s codec. Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Reviewed-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Murali Krishna Vemuri <murali-krishna.vemuri@amd.com> Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-09-22 15:05:20 -06:00
drm/nouveau: move out of staging drivers There's really no good reason for us to be in here anymore, we have to maintain this ABI anyway to avoid angering people. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-03-16 02:19:14 -06:00
source "drivers/gpu/drm/nouveau/Kconfig"
drm/i915: Kconfig option to disable the legacy fbdev support Boots Just Fine (tm)! The only glitch seems to be that at least on Fedora the boot splash gets confused and doesn't display much at all. And since there's no ugly console flickering anymore in between, the flicker while switching between X servers (VT support is still enabled) is even more jarring. Also, I'm unsure whether we don't need to somehow kick out vgacon, now that nothing else gets in the way. But stuff seems to work, so I don't care. Also everything still works as well with VGA_CONSOLE=n Also the #ifdef mess needs a bit of a cleanup, follow-up patches will do just that. To keep the Kconfig tidy, extract all the i915 options into its own file. v2: - Rebase on top of the preliminary hw support option and the intel_drv.h cleanup. - Shut up warnings in i915_debugfs.c v3: Use the right CONFIG variable, spotted by Chon Ming. Cc: Lee, Chon Ming <chon.ming.lee@intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Chon Ming Lee <chon.ming.lee@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-09 01:18:51 -06:00
source "drivers/gpu/drm/i915/Kconfig"
i915: Add a Kconfig option to turn on i915.preliminary_hw_support by default When building kernels for a preliminary hardware target, having to add a kernel command-line option can prove inconvenient. Add a Kconfig option that changes the default of this option to 1. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [danvet: Pimp the Kconfig help text a bit as suggested by Damien in his 2nd review.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-13 17:23:17 -06:00
drm/vgem: implement virtual GEM This patch implements the virtual GEM driver with PRIME sharing which allows vgem to import a gem object from other drivers for the purpose of mmap-ing them to userspace. The mmap is done using the mmap operation exported by other drivers. v2: remove platform_device and do not attach to dma bufs v3: use drm helpers for get/put pages v4: correct dumb create pitch Reviewed-by: Rob Clark <robdclark@gmail.com> (v3) Reviewed-by: Stéphane Marchesin <marcheu@chromium.org> (v3) Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Zach Reizner <zachr@google.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-04 17:33:41 -07:00
config DRM_VGEM
tristate "Virtual GEM provider"
depends on DRM
help
Choose this option to get a virtual graphics memory manager,
as used by Mesa's software renderer for enhanced performance.
If M is selected the module will be called vgem.
vmwgfx: Take the driver out of staging Also improve a bit on the Kconfig help. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-11 02:42:51 -06:00
source "drivers/gpu/drm/exynos/Kconfig"
drm: rockchip: Add basic drm driver This patch adds the basic structure of a DRM Driver for Rockchip Socs. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Acked-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-08-22 04:36:26 -06:00
source "drivers/gpu/drm/rockchip/Kconfig"
vmwgfx: Take the driver out of staging Also improve a bit on the Kconfig help. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-11 02:42:51 -06:00
source "drivers/gpu/drm/vmwgfx/Kconfig"
gma500: Now connect up to the DRM build to finish the job Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-03 12:22:48 -06:00
source "drivers/gpu/drm/gma500/Kconfig"
drm/udl: initial UDL driver (v4) This is an initial drm/kms driver for the displaylink devices. Supports fb_defio, supports KMS dumb interface supports 24bpp via conversion to 16bpp, hw can do this better. supports hot unplug using new drm core features. On an unplug, it disables connector polling, unplugs connectors from sysfs, unplugs fbdev layer (using Kay's API), drops all the USB device URBs, and call the drm core to unplug the device. This driver is based in large parts on udlfb.c so I've licensed it under GPLv2. Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-12-14 14:14:24 -07:00
source "drivers/gpu/drm/udl/Kconfig"
drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2) This is the initial driver for the Aspeed Technologies chips found in servers. This driver supports the AST 2000, 2100, 2200, 2150 and 2300. It doesn't support the AST11xx due to lack of hw to test it on, and them requiring different codepaths. This driver is intended to be used with xf86-video-modesetting in userspace. This driver has a slightly different design than other KMS drivers, but future server chips will probably share similiar setup. As these GPUs commonly have low video RAM, it doesn't make sense to put the kms console in VRAM always. This driver places the kms console into system RAM, and does dirty updates to a copy in video RAM. When userspace sets a new scanout buffer, it forcefully evicts the video RAM console, and X can create a framebuffer that can use all of of video RAM. This driver uses TTM but in a very simple fashion to control the eviction to system RAM of the console, and multiple servers. v2: add s/r support, fix Kconfig. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-02-29 06:40:04 -07:00
source "drivers/gpu/drm/ast/Kconfig"
mgag200: initial g200se driver (v2) This is a driver for the G200 server engines chips, it doesn't driver any of the Matrix G series desktop cards. It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards. Its based on previous work done my Matthew Garrett but remodelled to follow the same style and flow as the AST server driver. It also works along the same lines as the AST server driver wrt memory management. There is no userspace driver planned, xf86-video-modesetting should be used. It also appears these GPUs have no ARGB hw cursors. v2: add missing tagfifo reset + G200 SE memory bw setup pieces. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-17 08:01:25 -06:00
source "drivers/gpu/drm/mgag200/Kconfig"
drm/kms: driver for virtual cirrus under qemu This is the initial driver for emulated cirrus GPU found in qemu. This driver only supports the emulated GPU and doesn't attempt to bind to any real cirrus GPUs. This driver is intended to be used with xf86-video-modesetting in userspace. It requires at least version 0.3.0 This follow the same design as ast and mgag200, and is based on work done by Matthew Garrett previously. This GPU has no hw cursor, and it can't scanout 32-bpp, only packed 24-bpp. i.e. it sucks. Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-17 07:12:29 -06:00
source "drivers/gpu/drm/cirrus/Kconfig"
drm: Renesas SH Mobile DRM driver The SH Mobile LCD controller (LCDC) DRM driver supports the main graphics plane in RGB and YUV formats, as well as the overlay planes (in alpha-blending mode only). Only flat panel outputs using the parallel interface are supported. Support for SYS panels, HDMI and DSI is currently not implemented. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-26 05:53:59 -06:00
DRM: Armada: Add Armada DRM driver This patch adds support for the pair of LCD controllers on the Marvell Armada 510 SoCs. This driver supports: - multiple contiguous scanout buffers for video and graphics - shm backed cacheable buffer objects for X pixmaps for Vivante GPU acceleration - dual lcd0 and lcd1 crt operation - video overlay on each LCD crt via DRM planes - page flipping of the main scanout buffers - DRM prime for buffer export/import This driver is trivial to extend to other Armada SoCs. Included in this commit is the core driver with no output support; output support is platform and encoder driver dependent. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-08-15 06:59:49 -06:00
source "drivers/gpu/drm/armada/Kconfig"
drm: add Atmel HLCDC Display Controller support The Atmel HLCDC (HLCD Controller) IP available on some Atmel SoCs (i.e. at91sam9n12, at91sam9x5 family or sama5d3 family) provides a display controller device. This display controller supports at least one primary plane and might provide several overlays and an hardware cursor depending on the IP version. At the moment, this driver only implements an RGB connector to interface with LCD panels, but support for other kind of external devices might be added later. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Anthony Harivel <anthony.harivel@emtrion.de> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-01-06 03:13:28 -07:00
source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
drm: Renesas R-Car Display Unit DRM driver The R-Car Display Unit (DU) DRM driver supports both superposition processors and all eight planes in RGB and YUV formats with alpha blending. Only VGA and LVDS encoders and connectors are currently supported. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-06-19 05:54:11 -06:00
source "drivers/gpu/drm/rcar-du/Kconfig"
drm: Renesas SH Mobile DRM driver The SH Mobile LCD controller (LCDC) DRM driver supports the main graphics plane in RGB and YUV formats, as well as the overlay planes (in alpha-blending mode only). Only flat panel outputs using the parallel interface are supported. Support for SYS panels, HDMI and DSI is currently not implemented. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-26 05:53:59 -06:00
source "drivers/gpu/drm/shmobile/Kconfig"
drm: Add NVIDIA Tegra20 support This commit adds a KMS driver for the Tegra20 SoC. This includes basic support for host1x and the two display controllers found on the Tegra20 SoC. Each display controller can drive a separate RGB/LVDS output. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Mark Zhang <markz@nvidia.com> Reviewed-by: Mark Zhang <markz@nvidia.com> Tested-by: Mark Zhang <markz@nvidia.com> Tested-and-acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Terje Bergstrom <tbergstrom@nvidia.com> Tested-by: Terje Bergstrom <tbergstrom@nvidia.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-15 14:28:22 -07:00
drm: Add Allwinner A10 Display Engine support The Allwinner A10 and subsequent SoCs share the same display pipeline, with variations in the number of controllers (1 or 2), or the presence or not of some output (HDMI, TV, VGA) or not. Add a driver with a limited set of features for now, and we will hopefully support all of them eventually Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-10-29 02:36:23 -06:00
source "drivers/gpu/drm/sun4i/Kconfig"
drm/omap: move out of staging Now that the omapdss interface has been reworked so that omapdrm can use dispc directly, we have been able to fix the remaining functional kms issues with omapdrm. And in the mean time the PM sequencing and many other of that open issues have been solved. So I think it makes sense to finally move omapdrm out of staging. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-02-11 10:43:09 -07:00
source "drivers/gpu/drm/omapdrm/Kconfig"
Merge branch 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux into drm-next KMS driver for TI LCD controller * 'tilcdc-next' of git://people.freedesktop.org/~robclark/linux: drm/tilcdc: add support for LCD panels (v5) drm/tilcdc: add encoder slave (v2) drm/i2c: nxp-tda998x (v3) drm/tilcdc: add TI LCD Controller DRM driver (v4) drm/nouveau: use i2c encoder helper wrappers drm: i2c encoder helper wrappers drm/cma: add debugfs helpers drm: small fix in drm_send_vblank_event() drm: Don't set the plane->fb to NULL on successfull set_plane drm/cma-helper: fixup compilation Conflicts: drivers/gpu/drm/Kconfig drivers/gpu/drm/Makefile drivers/gpu/drm/drm_fb_cma_helper.c
2013-02-20 16:31:47 -07:00
drm/tilcdc: add TI LCD Controller DRM driver (v4) A simple DRM/KMS driver for the TI LCD Controller found in various smaller TI parts (AM33xx, OMAPL138, etc). This driver uses the CMA helpers. Currently only the TFP410 DVI encoder is supported (tested with beaglebone + DVI cape). There are also various LCD displays, for which support can be added (as I get hw to test on), and an external i2c HDMI encoder found on some boards. The display controller supports a single CRTC. And the encoder+ connector are split out into sub-devices. Depending on which LCD or external encoder is actually present, the appropriate output module(s) will be loaded. v1: original v2: fix fb refcnting and few other cleanups v3: get +/- vsync/hsync from timings rather than panel-info, add option DT max-bandwidth field so driver doesn't attempt to pick a display mode with too high memory bandwidth, and other small cleanups v4: remove some unneeded stuff from panel-info struct, properly set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Koen Kooi <koen@dominion.thruhere.net>
2013-01-08 14:04:28 -07:00
source "drivers/gpu/drm/tilcdc/Kconfig"
drm: add new QXL driver. (v1.4) QXL is a paravirtual graphics device used by the Spice virtual desktop interface. The drivers uses GEM and TTM to manage memory, the qxl hw fencing however is quite different than normal TTM expects, we have to keep track of a number of non-linear fence ids per bo that we need to have released by the hardware. The releases are freed from a workqueue that wakes up and processes the release ring. releases are suballocated from a BO, there are 3 release categories, drawables, surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling. The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface ids. This requires a newer version of the QXL userspace driver, so shouldn't be enabled until that has been placed into your distro of choice. Authors: Dave Airlie, Alon Levy v1.1: fixup some issues in the ioctl interface with padding v1.2: add module device table v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq, don't try flush release ring (broken hw), fix -modesetting. v1.4: fbcon cpu usage reduction + suitable accel flags. Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-24 21:47:55 -07:00
source "drivers/gpu/drm/qxl/Kconfig"
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
drm/bochs: new driver DRM driver for (virtual) vga cards using the bochs dispi interface, such as the qemu standard vga (qemu -vga std). Don't bother supporting anything but 32bpp for now, even though the virtual hardware is able to do that. Known issue: mmap(/dev/fb0) doesn't work. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-12-17 10:04:46 -07:00
source "drivers/gpu/drm/bochs/Kconfig"
Add virtio gpu driver. This patch adds a kms driver for the virtio gpu. The xorg modesetting driver can handle the device just fine, the framebuffer for fbcon is there too. Qemu patches for the host side are under review currently. The pci version of the device comes in two variants: with and without vga compatibility. The former has a extra memory bar for the vga framebuffer, the later is a pure virtio device. The only concern for this driver is that in the virtio-vga case we have to kick out the firmware framebuffer. Initial revision has only 2d support, 3d (virgl) support requires some more work on the qemu side and will be added later. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
2013-09-08 18:02:56 -06:00
source "drivers/gpu/drm/virtio/Kconfig"
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-26 10:44:06 -06:00
source "drivers/gpu/drm/msm/Kconfig"
drm/tegra: Move driver to DRM tree In order to make subsystem-wide changes easier, move the Tegra DRM driver back into the DRM tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-09 02:32:49 -06:00
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-19 20:19:49 -06:00
source "drivers/gpu/drm/fsl-dcu/Kconfig"
drm/tegra: Move driver to DRM tree In order to make subsystem-wide changes easier, move the Tegra DRM driver back into the DRM tree. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-09 02:32:49 -06:00
source "drivers/gpu/drm/tegra/Kconfig"
drm: Add panel support Add a very simple framework to register and lookup panels. Panel drivers can initialize a DRM panel and register it with the framework, allowing them to be retrieved and used by display drivers. Currently only support for DPMS and obtaining panel modes is provided. However it should be sufficient to enable a large number of panels. The framework should also be easily extensible to support more sophisticated kinds of panels such as DSI. The framework hasn't been tied into the DRM core, even though it should be easily possible to do so if that's what we want. In the current implementation, display drivers can simple make use of it to retrieve a panel, obtain its modes and control its DPMS mode. Note that this is currently only tested on systems that boot from a device tree. No glue code has been written yet for systems that use platform data, but it should be easy to add. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 05:36:43 -06:00
source "drivers/gpu/drm/panel/Kconfig"
drm: sti: add VTG driver Video Time Generator drivers are used to synchronize the compositor and tvout hardware IPs by providing line count, sample count, synchronization signals (HSYNC, VSYNC) and top and bottom fields indication. VTG are used by pair for each data path (main or auxiliary) one for master and one for slave. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 10:20:56 -06:00
drm/bridge: Put Kconfig entries in a separate menu Put the Kconfig entries for bridge drivers into a separate menu so that they are automatically grouped and don't clutter up the top-level menu. While at it, move the bridge menu towards the end of the top-level menu where the panel menu is already located. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-07-21 09:01:19 -06:00
source "drivers/gpu/drm/bridge/Kconfig"
drm: sti: add VTG driver Video Time Generator drivers are used to synchronize the compositor and tvout hardware IPs by providing line count, sample count, synchronization signals (HSYNC, VSYNC) and top and bottom fields indication. VTG are used by pair for each data path (main or auxiliary) one for master and one for slave. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-07-30 10:20:56 -06:00
source "drivers/gpu/drm/sti/Kconfig"
amdkfd: Add amdkfd skeleton driver This patch adds the amdkfd skeleton driver. The driver does nothing except define a /dev/kfd device. It returns -ENODEV on all amdkfd IOCTLs. v3: Move bool field to the end of structure, removed the pmc ioctls and added a meaningful error message for ioctl error. v5: Create a new folder drm/amd and move amdkfd from drm/radeon/ to drm/amd/ Remove scheduler_class from kfd_priv.h as it was never used Add skeleton implementation of the Get Version IOCTL v6: Update module version to the correct number and remove the "default m" from the Kconfig file Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
2014-07-16 12:08:55 -06:00
source "drivers/gpu/drm/amd/amdkfd/Kconfig"
drm: imx: Move imx-drm driver out of staging The imx-drm driver was put into staging mostly for the following reasons, all of which have been addressed or superseded: - convert the irq driver to use linear irq domains - work out the device tree bindings, this lead to the common of_graph bindings being used - factor out common helper functions, this mostly resulted in the component framework and drm of_graph helpers. Before adding new fixes, and certainly before adding new features, move it into its proper place below drivers/gpu/drm. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-11-24 08:33:34 -07:00
source "drivers/gpu/drm/imx/Kconfig"
drm/vc4: Add KMS support for Raspberry Pi. This is enough for fbcon and bringing up X using xf86-video-modesetting. It doesn't support the 3D accelerator or power management yet. v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init ordering instead of using the .load hook. Structure registration more like tegra's, but still using the typical "component" code. Drop no-op hooks for atomic_begin and mode_fixup() now that they're optional. Drop sentinel in Makefile. Fix minor style nits I noticed on another reread. v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead of having a fixed video mode. Use exynos-style component driver matching instead of devicetree nodes to list the component driver instances. Rename compatibility strings to say bcm2835, and distinguish pv0/1/2. Clean up some h/vsync code, and add in interlaced mode setup. Fix up probe/bind error paths. Use bitops.h macros for vc4_regs.h v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now that other bugs have been fixed, add timeouts to cpu_relax() loops, rename hpd-gpio to hpd-gpios. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-02 14:01:12 -07:00
source "drivers/gpu/drm/vc4/Kconfig"
drm/etnaviv: add initial etnaviv DRM driver This adds the etnaviv DRM driver and hooks it up in Makefiles and Kconfig. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-03 10:21:29 -07:00
source "drivers/gpu/drm/etnaviv/Kconfig"
drm: Add support of ARC PGU display controller ARC PGU could be found on some development boards from Synopsys. This is a simple byte streamer that reads data from a framebuffer and sends data to the single encoder. Signed-off-by: Carlos Palminha <palminha@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: linux-snps-arc@lists.infradead.org
2016-02-19 05:30:26 -07:00
source "drivers/gpu/drm/arc/Kconfig"
drm/hisilicon: Add hisilicon kirin drm master driver Add kirin DRM master driver for hi6220 SoC which used in HiKey board. Add dumb buffer feature. Add prime dmabuf feature. v9: Add OF and ARM64 depends on in Kconfig v8: None. v7: - Add config.mutex protection when accessing mode_config.connector_list. - Clean up match data getting. v6: None. v5: None. v4: None. v3: - Move and rename all the files to kirin sub-directory. So that we could separate different seires SoCs' driver. - Replace drm_platform_init, load, unload implementation. v2: - Remove abtraction layer. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
2015-10-09 04:00:56 -06:00
source "drivers/gpu/drm/hisilicon/Kconfig"
drm/mediatek: Add DRM Driver for Mediatek SoC MT8173. This patch adds an initial DRM driver for the Mediatek MT8173 DISP subsystem. It currently supports two fixed output streams from the OVL0/OVL1 sources to the DSI0/DPI0 sinks, respectively. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: YT Shen <yt.shen@mediatek.com> Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: Mao Huang <littlecvr@chromium.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2016-01-04 10:36:34 -07:00
source "drivers/gpu/drm/mediatek/Kconfig"
drm: hide legacy drivers with CONFIG_DRM_LEGACY Lets move forward and hide the remaining DRI1 drivers behind a config option, so we have a central place to disable them all. Furthermore, we can provide a clear warning to anyone enabling them. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160804080657.9664-1-dh.herrmann@gmail.com
2016-08-04 02:06:56 -06:00
drm: zte: add initial vou drm driver It adds the initial ZTE VOU display controller DRM driver. There are still some features to be added, like overlay plane, scaling, and more output devices support. But it's already useful with dual CRTCs and HDMI monitor working. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2016-09-22 05:52:39 -06:00
source "drivers/gpu/drm/zte/Kconfig"
drm: Add new driver for MXSFB controller Add new driver for the MXSFB controller found in i.MX23/28/6SX . The MXSFB controller is a simple framebuffer controller with one parallel LCD output. Unlike the MXSFB fbdev driver that is used on these systems now, this driver uses the DRM/KMS framework. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org>
2016-08-18 12:23:01 -06:00
source "drivers/gpu/drm/mxsfb/Kconfig"
drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 07:29:37 -07:00
source "drivers/gpu/drm/meson/Kconfig"
drm: Add DRM support for tiny LCD displays tinydrm provides helpers for very simple displays that can use CMA backed framebuffers and need flushing on changes. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Thierry Reding <treding@nvidia.com>
2017-01-21 16:15:00 -07:00
source "drivers/gpu/drm/tinydrm/Kconfig"
drm: hide legacy drivers with CONFIG_DRM_LEGACY Lets move forward and hide the remaining DRI1 drivers behind a config option, so we have a central place to disable them all. Furthermore, we can provide a clear warning to anyone enabling them. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160804080657.9664-1-dh.herrmann@gmail.com
2016-08-04 02:06:56 -06:00
# Keep legacy drivers last
menuconfig DRM_LEGACY
bool "Enable legacy drivers (DANGEROUS)"
drm: fix MMU dependencies DRM_VM and DRM_LEGACY shouldn't be selected if MMU isn't set. Fixes: 62a0d98a188c ("drm: allow to use mmuless SoC") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484211456-5759-1-git-send-email-benjamin.gaignard@linaro.org
2017-01-12 01:57:36 -07:00
depends on DRM && MMU
drm: compile drm_vm.c only when needed drm_vm.c functions are only need for DRM_LEGACY and DRM_NOUVEAU. Use a new DRM_VM to define when drm_vm.c in needed. stub drm_legacy_vma_flush() to avoid compilation issues version 4: - a "config DRM_VM" in Kconfig Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> [danvet: Fix conflict.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-01-04 02:12:56 -07:00
select DRM_VM
drm: hide legacy drivers with CONFIG_DRM_LEGACY Lets move forward and hide the remaining DRI1 drivers behind a config option, so we have a central place to disable them all. Furthermore, we can provide a clear warning to anyone enabling them. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160804080657.9664-1-dh.herrmann@gmail.com
2016-08-04 02:06:56 -06:00
help
Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous
APIs to user-space, which can be used to circumvent access
restrictions and other security measures. For backwards compatibility
those drivers are still available, but their use is highly
inadvisable and might harm your system.
You are recommended to use the safe modeset-only drivers instead, and
perform 3D emulation in user-space.
Unless you have strong reasons to go rogue, say "N".
if DRM_LEGACY
config DRM_TDFX
tristate "3dfx Banshee/Voodoo3+"
depends on DRM && PCI
help
Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
graphics card. If M is selected, the module will be called tdfx.
config DRM_R128
tristate "ATI Rage 128"
depends on DRM && PCI
select FW_LOADER
help
Choose this option if you have an ATI Rage 128 graphics card. If M
is selected, the module will be called r128. AGP support for
this card is strongly suggested (unless you have a PCI version).
config DRM_I810
tristate "Intel I810"
# !PREEMPT because of missing ioctl locking
depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
help
Choose this option if you have an Intel I810 graphics card. If M is
selected, the module will be called i810. AGP support is required
for this driver to work.
config DRM_MGA
tristate "Matrox g200/g400"
depends on DRM && PCI
select FW_LOADER
help
Choose this option if you have a Matrox G200, G400 or G450 graphics
card. If M is selected, the module will be called mga. AGP
support is required for this driver to work.
config DRM_SIS
tristate "SiS video cards"
depends on DRM && AGP
depends on FB_SIS || FB_SIS=n
help
Choose this option if you have a SiS 630 or compatible video
chipset. If M is selected the module will be called sis. AGP
support is required for this driver to work.
config DRM_VIA
tristate "Via unichrome video cards"
depends on DRM && PCI
help
Choose this option if you have a Via unichrome or compatible video
chipset. If M is selected the module will be called via.
config DRM_SAVAGE
tristate "Savage video cards"
depends on DRM && PCI
help
Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
chipset. If M is selected the module will be called savage.
endif # DRM_LEGACY
drm: Add a simple generator of random permutations When testing, we want a random but yet reproducible order in which to process elements. Here we create an array which is a random (using the Tausworthe PRNG) permutation of the order in which to execute. Note these are simple helpers intended to be merged upstream in lib/ v2: Tidier code by David Herrmann v3: Add reminder that this code is intended to be temporary, with at least the bulk of the prandom changes going to lib/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-6-chris@chris-wilson.co.uk
2016-12-22 01:36:08 -07:00
config DRM_LIB_RANDOM
bool
default n