1
0
Fork 0
alistair23-linux/drivers/infiniband/hw/mlx4/main.c

2849 lines
76 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006, 2007 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/init.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/rtnetlink.h>
#include <linux/if_vlan.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
#include <rdma/ib_smi.h>
#include <rdma/ib_user_verbs.h>
#include <rdma/ib_addr.h>
#include <linux/mlx4/driver.h>
#include <linux/mlx4/cmd.h>
#include <linux/mlx4/qp.h>
#include "mlx4_ib.h"
#include "user.h"
#define DRV_NAME MLX4_IB_DRV_NAME
#define DRV_VERSION "2.2-1"
#define DRV_RELDATE "Feb 2014"
#define MLX4_IB_FLOW_MAX_PRIO 0xFFF
#define MLX4_IB_FLOW_QPN_MASK 0xFFFFFF
#define MLX4_IB_CARD_REV_A0 0xA0
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox ConnectX HCA InfiniBand driver");
MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION(DRV_VERSION);
int mlx4_ib_sm_guid_assign = 1;
module_param_named(sm_guid_assign, mlx4_ib_sm_guid_assign, int, 0444);
MODULE_PARM_DESC(sm_guid_assign, "Enable SM alias_GUID assignment if sm_guid_assign > 0 (Default: 1)");
static const char mlx4_ib_version[] =
DRV_NAME ": Mellanox ConnectX InfiniBand driver v"
DRV_VERSION " (" DRV_RELDATE ")\n";
struct update_gid_work {
struct work_struct work;
union ib_gid gids[128];
struct mlx4_ib_dev *dev;
int port;
};
static void do_slave_init(struct mlx4_ib_dev *ibdev, int slave, int do_init);
static struct workqueue_struct *wq;
static void init_query_mad(struct ib_smp *mad)
{
mad->base_version = 1;
mad->mgmt_class = IB_MGMT_CLASS_SUBN_LID_ROUTED;
mad->class_version = 1;
mad->method = IB_MGMT_METHOD_GET;
}
static union ib_gid zgid;
static int check_flow_steering_support(struct mlx4_dev *dev)
{
int eth_num_ports = 0;
int ib_num_ports = 0;
int dmfs = dev->caps.steering_mode == MLX4_STEERING_MODE_DEVICE_MANAGED;
if (dmfs) {
int i;
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
eth_num_ports++;
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
ib_num_ports++;
dmfs &= (!ib_num_ports ||
(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_DMFS_IPOIB)) &&
(!eth_num_ports ||
(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_FS_EN));
if (ib_num_ports && mlx4_is_mfunc(dev)) {
pr_warn("Device managed flow steering is unavailable for IB port in multifunction env.\n");
dmfs = 0;
}
}
return dmfs;
}
static int num_ib_ports(struct mlx4_dev *dev)
{
int ib_ports = 0;
int i;
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
ib_ports++;
return ib_ports;
}
static int mlx4_ib_query_device(struct ib_device *ibdev,
struct ib_device_attr *props)
{
struct mlx4_ib_dev *dev = to_mdev(ibdev);
struct ib_smp *in_mad = NULL;
struct ib_smp *out_mad = NULL;
int err = -ENOMEM;
int have_ib_ports;
in_mad = kzalloc(sizeof *in_mad, GFP_KERNEL);
out_mad = kmalloc(sizeof *out_mad, GFP_KERNEL);
if (!in_mad || !out_mad)
goto out;
init_query_mad(in_mad);
in_mad->attr_id = IB_SMP_ATTR_NODE_INFO;
err = mlx4_MAD_IFC(to_mdev(ibdev), MLX4_MAD_IFC_IGNORE_KEYS,
1, NULL, NULL, in_mad, out_mad);
if (err)
goto out;
memset(props, 0, sizeof *props);
have_ib_ports = num_ib_ports(dev->dev);
props->fw_ver = dev->dev->caps.fw_ver;
props->device_cap_flags = IB_DEVICE_CHANGE_PHY_PORT |
IB_DEVICE_PORT_ACTIVE_EVENT |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_RC_RNR_NAK_GEN |
IB_DEVICE_BLOCK_MULTICAST_LOOPBACK;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR)
props->device_cap_flags |= IB_DEVICE_BAD_PKEY_CNTR;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR)
props->device_cap_flags |= IB_DEVICE_BAD_QKEY_CNTR;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_APM && have_ib_ports)
props->device_cap_flags |= IB_DEVICE_AUTO_PATH_MIG;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_UD_AV_PORT)
props->device_cap_flags |= IB_DEVICE_UD_AV_PORT_ENFORCE;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_IPOIB_CSUM)
props->device_cap_flags |= IB_DEVICE_UD_IP_CSUM;
if (dev->dev->caps.max_gso_sz &&
(dev->dev->rev_id != MLX4_IB_CARD_REV_A0) &&
(dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_BLH))
props->device_cap_flags |= IB_DEVICE_UD_TSO;
if (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_RESERVED_LKEY)
props->device_cap_flags |= IB_DEVICE_LOCAL_DMA_LKEY;
if ((dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_LOCAL_INV) &&
(dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_REMOTE_INV) &&
(dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_FAST_REG_WR))
props->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC)
props->device_cap_flags |= IB_DEVICE_XRC;
if (dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_MEM_WINDOW)
props->device_cap_flags |= IB_DEVICE_MEM_WINDOW;
if (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_TYPE_2_WIN) {
if (dev->dev->caps.bmme_flags & MLX4_BMME_FLAG_WIN_TYPE_2B)
props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2B;
else
props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2A;
if (dev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING;
}
props->vendor_id = be32_to_cpup((__be32 *) (out_mad->data + 36)) &
0xffffff;
props->vendor_part_id = dev->dev->persist->pdev->device;
props->hw_ver = be32_to_cpup((__be32 *) (out_mad->data + 32));
memcpy(&props->sys_image_guid, out_mad->data + 4, 8);
props->max_mr_size = ~0ull;
props->page_size_cap = dev->dev->caps.page_size_cap;
mlx4: Structures and init/teardown for VF resource quotas This is step #1 for implementing SRIOV resource quotas for VFs. Quotas are implemented per resource type for VFs and the PF, to prevent any entity from simply grabbing all the resources for itself and leaving the other entities unable to obtain such resources. Resources which are allocated using quotas: QPs, CQs, SRQs, MPTs, MTTs, MAC, VLAN, and Counters. The quota system works as follows: Each entity (VF or PF) is given a max number of a given resource (its quota), and a guaranteed minimum number for each resource (starvation prevention). For QPs, CQs, SRQs, MPTs and MTTs: 50% of the available quantity for the resource is divided equally among the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool. The other 50% is the "free pool", allocated on a first-come-first-serve basis. For each VF/PF, resources are first allocated from its "guaranteed-minimum" pool. When that pool is exhausted, the driver attempts to allocate from the resource "free-pool". The quota (i.e., max) for the VFs and the PF is: The free-pool amount (50% of the real max) + the guaranteed minimum For MACs: Guarantee 2 MACs per VF/PF per port. As a result, since we have only 128 MACs per port, reduce the allowable number of VFs from 64 to 63. Any remaining MACs are put into a free pool. For VLANs: For the PF, the per-port quota is 128 and guarantee is 64 (to allow the PF to register at least a VLAN per VF in VST mode). For the VFs, the per-port quota is 64 and the guarantee is 0. We assume that VGT VFs are trusted not to abuse the VLAN resource. For Counters: For all functions (PF and VFs), the quota is 128 and the guarantee is 0. In this patch, we define the needed structures, which are added to the resource-tracker struct. In addition, we do initialization for the resource quota, and adjust the query_device response to use quotas rather than resource maxima. As part of the implementation, we introduce a new field in mlx4_dev: quotas. This field holds the resource quotas used to report maxima to the upper layers (ib_core, via query_device). The HCA maxima of these values are passed to the VFs (via QUERY_HCA) so that they may continue to use these in handling QPs, CQs, SRQs and MPTs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 01:03:23 -07:00
props->max_qp = dev->dev->quotas.qp;
props->max_qp_wr = dev->dev->caps.max_wqes - MLX4_IB_SQ_MAX_SPARE;
props->max_sge = min(dev->dev->caps.max_sq_sg,
dev->dev->caps.max_rq_sg);
mlx4: Structures and init/teardown for VF resource quotas This is step #1 for implementing SRIOV resource quotas for VFs. Quotas are implemented per resource type for VFs and the PF, to prevent any entity from simply grabbing all the resources for itself and leaving the other entities unable to obtain such resources. Resources which are allocated using quotas: QPs, CQs, SRQs, MPTs, MTTs, MAC, VLAN, and Counters. The quota system works as follows: Each entity (VF or PF) is given a max number of a given resource (its quota), and a guaranteed minimum number for each resource (starvation prevention). For QPs, CQs, SRQs, MPTs and MTTs: 50% of the available quantity for the resource is divided equally among the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool. The other 50% is the "free pool", allocated on a first-come-first-serve basis. For each VF/PF, resources are first allocated from its "guaranteed-minimum" pool. When that pool is exhausted, the driver attempts to allocate from the resource "free-pool". The quota (i.e., max) for the VFs and the PF is: The free-pool amount (50% of the real max) + the guaranteed minimum For MACs: Guarantee 2 MACs per VF/PF per port. As a result, since we have only 128 MACs per port, reduce the allowable number of VFs from 64 to 63. Any remaining MACs are put into a free pool. For VLANs: For the PF, the per-port quota is 128 and guarantee is 64 (to allow the PF to register at least a VLAN per VF in VST mode). For the VFs, the per-port quota is 64 and the guarantee is 0. We assume that VGT VFs are trusted not to abuse the VLAN resource. For Counters: For all functions (PF and VFs), the quota is 128 and the guarantee is 0. In this patch, we define the needed structures, which are added to the resource-tracker struct. In addition, we do initialization for the resource quota, and adjust the query_device response to use quotas rather than resource maxima. As part of the implementation, we introduce a new field in mlx4_dev: quotas. This field holds the resource quotas used to report maxima to the upper layers (ib_core, via query_device). The HCA maxima of these values are passed to the VFs (via QUERY_HCA) so that they may continue to use these in handling QPs, CQs, SRQs and MPTs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 01:03:23 -07:00
props->max_cq = dev->dev->quotas.cq;
props->max_cqe = dev->dev->caps.max_cqes;
mlx4: Structures and init/teardown for VF resource quotas This is step #1 for implementing SRIOV resource quotas for VFs. Quotas are implemented per resource type for VFs and the PF, to prevent any entity from simply grabbing all the resources for itself and leaving the other entities unable to obtain such resources. Resources which are allocated using quotas: QPs, CQs, SRQs, MPTs, MTTs, MAC, VLAN, and Counters. The quota system works as follows: Each entity (VF or PF) is given a max number of a given resource (its quota), and a guaranteed minimum number for each resource (starvation prevention). For QPs, CQs, SRQs, MPTs and MTTs: 50% of the available quantity for the resource is divided equally among the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool. The other 50% is the "free pool", allocated on a first-come-first-serve basis. For each VF/PF, resources are first allocated from its "guaranteed-minimum" pool. When that pool is exhausted, the driver attempts to allocate from the resource "free-pool". The quota (i.e., max) for the VFs and the PF is: The free-pool amount (50% of the real max) + the guaranteed minimum For MACs: Guarantee 2 MACs per VF/PF per port. As a result, since we have only 128 MACs per port, reduce the allowable number of VFs from 64 to 63. Any remaining MACs are put into a free pool. For VLANs: For the PF, the per-port quota is 128 and guarantee is 64 (to allow the PF to register at least a VLAN per VF in VST mode). For the VFs, the per-port quota is 64 and the guarantee is 0. We assume that VGT VFs are trusted not to abuse the VLAN resource. For Counters: For all functions (PF and VFs), the quota is 128 and the guarantee is 0. In this patch, we define the needed structures, which are added to the resource-tracker struct. In addition, we do initialization for the resource quota, and adjust the query_device response to use quotas rather than resource maxima. As part of the implementation, we introduce a new field in mlx4_dev: quotas. This field holds the resource quotas used to report maxima to the upper layers (ib_core, via query_device). The HCA maxima of these values are passed to the VFs (via QUERY_HCA) so that they may continue to use these in handling QPs, CQs, SRQs and MPTs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 01:03:23 -07:00
props->max_mr = dev->dev->quotas.mpt;
props->max_pd = dev->dev->caps.num_pds - dev->dev->caps.reserved_pds;
props->max_qp_rd_atom = dev->dev->caps.max_qp_dest_rdma;
props->max_qp_init_rd_atom = dev->dev->caps.max_qp_init_rdma;
props->max_res_rd_atom = props->max_qp_rd_atom * props->max_qp;
mlx4: Structures and init/teardown for VF resource quotas This is step #1 for implementing SRIOV resource quotas for VFs. Quotas are implemented per resource type for VFs and the PF, to prevent any entity from simply grabbing all the resources for itself and leaving the other entities unable to obtain such resources. Resources which are allocated using quotas: QPs, CQs, SRQs, MPTs, MTTs, MAC, VLAN, and Counters. The quota system works as follows: Each entity (VF or PF) is given a max number of a given resource (its quota), and a guaranteed minimum number for each resource (starvation prevention). For QPs, CQs, SRQs, MPTs and MTTs: 50% of the available quantity for the resource is divided equally among the PF and all the active VFs (i.e., the number of VFs in the mlx4_core module parameter "num_vfs"). This 50% represents the "guaranteed minimum" pool. The other 50% is the "free pool", allocated on a first-come-first-serve basis. For each VF/PF, resources are first allocated from its "guaranteed-minimum" pool. When that pool is exhausted, the driver attempts to allocate from the resource "free-pool". The quota (i.e., max) for the VFs and the PF is: The free-pool amount (50% of the real max) + the guaranteed minimum For MACs: Guarantee 2 MACs per VF/PF per port. As a result, since we have only 128 MACs per port, reduce the allowable number of VFs from 64 to 63. Any remaining MACs are put into a free pool. For VLANs: For the PF, the per-port quota is 128 and guarantee is 64 (to allow the PF to register at least a VLAN per VF in VST mode). For the VFs, the per-port quota is 64 and the guarantee is 0. We assume that VGT VFs are trusted not to abuse the VLAN resource. For Counters: For all functions (PF and VFs), the quota is 128 and the guarantee is 0. In this patch, we define the needed structures, which are added to the resource-tracker struct. In addition, we do initialization for the resource quota, and adjust the query_device response to use quotas rather than resource maxima. As part of the implementation, we introduce a new field in mlx4_dev: quotas. This field holds the resource quotas used to report maxima to the upper layers (ib_core, via query_device). The HCA maxima of these values are passed to the VFs (via QUERY_HCA) so that they may continue to use these in handling QPs, CQs, SRQs and MPTs. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03 01:03:23 -07:00
props->max_srq = dev->dev->quotas.srq;
props->max_srq_wr = dev->dev->caps.max_srq_wqes - 1;
props->max_srq_sge = dev->dev->caps.max_srq_sge;
props->max_fast_reg_page_list_len = MLX4_MAX_FAST_REG_PAGES;
props->local_ca_ack_delay = dev->dev->caps.local_ca_ack_delay;
props->atomic_cap = dev->dev->caps.flags & MLX4_DEV_CAP_FLAG_ATOMIC ?
IB_ATOMIC_HCA : IB_ATOMIC_NONE;
props->masked_atomic_cap = props->atomic_cap;
props->max_pkeys = dev->dev->caps.pkey_table_len[1];
props->max_mcast_grp = dev->dev->caps.num_mgms + dev->dev->caps.num_amgms;
props->max_mcast_qp_attach = dev->dev->caps.num_qp_per_mgm;
props->max_total_mcast_qp_attach = props->max_mcast_qp_attach *
props->max_mcast_grp;
props->max_map_per_fmr = dev->dev->caps.max_fmr_maps;
out:
kfree(in_mad);
kfree(out_mad);
return err;
}
static enum rdma_link_layer
mlx4_ib_port_link_layer(struct ib_device *device, u8 port_num)
{
struct mlx4_dev *dev = to_mdev(device)->dev;
return dev->caps.port_mask[port_num] == MLX4_PORT_TYPE_IB ?
IB_LINK_LAYER_INFINIBAND : IB_LINK_LAYER_ETHERNET;
}
static int ib_link_query_port(struct ib_device *ibdev, u8 port,
struct ib_port_attr *props, int netw_view)
{
struct ib_smp *in_mad = NULL;
struct ib_smp *out_mad = NULL;
int ext_active_speed;
int mad_ifc_flags = MLX4_MAD_IFC_IGNORE_KEYS;
int err = -ENOMEM;
in_mad = kzalloc(sizeof *in_mad, GFP_KERNEL);
out_mad = kmalloc(sizeof *out_mad, GFP_KERNEL);
if (!in_mad || !out_mad)
goto out;
init_query_mad(in_mad);
in_mad->attr_id = IB_SMP_ATTR_PORT_INFO;
in_mad->attr_mod = cpu_to_be32(port);
if (mlx4_is_mfunc(to_mdev(ibdev)->dev) && netw_view)
mad_ifc_flags |= MLX4_MAD_IFC_NET_VIEW;
err = mlx4_MAD_IFC(to_mdev(ibdev), mad_ifc_flags, port, NULL, NULL,
in_mad, out_mad);
if (err)
goto out;
props->lid = be16_to_cpup((__be16 *) (out_mad->data + 16));
props->lmc = out_mad->data[34] & 0x7;
props->sm_lid = be16_to_cpup((__be16 *) (out_mad->data + 18));
props->sm_sl = out_mad->data[36] & 0xf;
props->state = out_mad->data[32] & 0xf;
props->phys_state = out_mad->data[33] >> 4;
props->port_cap_flags = be32_to_cpup((__be32 *) (out_mad->data + 20));
if (netw_view)
props->gid_tbl_len = out_mad->data[50];
else
props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port];
props->max_msg_sz = to_mdev(ibdev)->dev->caps.max_msg_sz;
props->pkey_tbl_len = to_mdev(ibdev)->dev->caps.pkey_table_len[port];
props->bad_pkey_cntr = be16_to_cpup((__be16 *) (out_mad->data + 46));
props->qkey_viol_cntr = be16_to_cpup((__be16 *) (out_mad->data + 48));
props->active_width = out_mad->data[31] & 0xf;
props->active_speed = out_mad->data[35] >> 4;
props->max_mtu = out_mad->data[41] & 0xf;
props->active_mtu = out_mad->data[36] >> 4;
props->subnet_timeout = out_mad->data[51] & 0x1f;
props->max_vl_num = out_mad->data[37] >> 4;
props->init_type_reply = out_mad->data[41] >> 4;
/* Check if extended speeds (EDR/FDR/...) are supported */
if (props->port_cap_flags & IB_PORT_EXTENDED_SPEEDS_SUP) {
ext_active_speed = out_mad->data[62] >> 4;
switch (ext_active_speed) {
case 1:
props->active_speed = IB_SPEED_FDR;
break;
case 2:
props->active_speed = IB_SPEED_EDR;
break;
}
}
/* If reported active speed is QDR, check if is FDR-10 */
if (props->active_speed == IB_SPEED_QDR) {
init_query_mad(in_mad);
in_mad->attr_id = MLX4_ATTR_EXTENDED_PORT_INFO;
in_mad->attr_mod = cpu_to_be32(port);
err = mlx4_MAD_IFC(to_mdev(ibdev), mad_ifc_flags, port,
NULL, NULL, in_mad, out_mad);
if (err)
goto out;
/* Checking LinkSpeedActive for FDR-10 */
if (out_mad->data[15] & 0x1)
props->active_speed = IB_SPEED_FDR10;
}
/* Avoid wrong speed value returned by FW if the IB link is down. */
if (props->state == IB_PORT_DOWN)
props->active_speed = IB_SPEED_SDR;
out:
kfree(in_mad);
kfree(out_mad);
return err;
}
static u8 state_to_phys_state(enum ib_port_state state)
{
return state == IB_PORT_ACTIVE ? 5 : 3;
}
static int eth_link_query_port(struct ib_device *ibdev, u8 port,
struct ib_port_attr *props, int netw_view)
{
struct mlx4_ib_dev *mdev = to_mdev(ibdev);
struct mlx4_ib_iboe *iboe = &mdev->iboe;
struct net_device *ndev;
enum ib_mtu tmp;
struct mlx4_cmd_mailbox *mailbox;
int err = 0;
int is_bonded = mlx4_is_bonded(mdev->dev);
mailbox = mlx4_alloc_cmd_mailbox(mdev->dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, port, 0,
MLX4_CMD_QUERY_PORT, MLX4_CMD_TIME_CLASS_B,
MLX4_CMD_WRAPPED);
if (err)
goto out;
props->active_width = (((u8 *)mailbox->buf)[5] == 0x40) ?
IB_WIDTH_4X : IB_WIDTH_1X;
props->active_speed = IB_SPEED_QDR;
props->port_cap_flags = IB_PORT_CM_SUP | IB_PORT_IP_BASED_GIDS;
props->gid_tbl_len = mdev->dev->caps.gid_table_len[port];
props->max_msg_sz = mdev->dev->caps.max_msg_sz;
props->pkey_tbl_len = 1;
props->max_mtu = IB_MTU_4096;
props->max_vl_num = 2;
props->state = IB_PORT_DOWN;
props->phys_state = state_to_phys_state(props->state);
props->active_mtu = IB_MTU_256;
if (is_bonded)
rtnl_lock(); /* required to get upper dev */
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_lock_bh(&iboe->lock);
ndev = iboe->netdevs[port - 1];
if (ndev && is_bonded)
ndev = netdev_master_upper_dev_get(ndev);
if (!ndev)
goto out_unlock;
tmp = iboe_get_mtu(ndev->mtu);
props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256;
props->state = (netif_running(ndev) && netif_carrier_ok(ndev)) ?
IB_PORT_ACTIVE : IB_PORT_DOWN;
props->phys_state = state_to_phys_state(props->state);
out_unlock:
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_unlock_bh(&iboe->lock);
if (is_bonded)
rtnl_unlock();
out:
mlx4_free_cmd_mailbox(mdev->dev, mailbox);
return err;
}
int __mlx4_ib_query_port(struct ib_device *ibdev, u8 port,
struct ib_port_attr *props, int netw_view)
{
int err;
memset(props, 0, sizeof *props);
err = mlx4_ib_port_link_layer(ibdev, port) == IB_LINK_LAYER_INFINIBAND ?
ib_link_query_port(ibdev, port, props, netw_view) :
eth_link_query_port(ibdev, port, props, netw_view);
return err;
}
static int mlx4_ib_query_port(struct ib_device *ibdev, u8 port,
struct ib_port_attr *props)
{
/* returns host view */
return __mlx4_ib_query_port(ibdev, port, props, 0);
}
int __mlx4_ib_query_gid(struct ib_device *ibdev, u8 port, int index,
union ib_gid *gid, int netw_view)
{
struct ib_smp *in_mad = NULL;
struct ib_smp *out_mad = NULL;
int err = -ENOMEM;
struct mlx4_ib_dev *dev = to_mdev(ibdev);
int clear = 0;
int mad_ifc_flags = MLX4_MAD_IFC_IGNORE_KEYS;
in_mad = kzalloc(sizeof *in_mad, GFP_KERNEL);
out_mad = kmalloc(sizeof *out_mad, GFP_KERNEL);
if (!in_mad || !out_mad)
goto out;
init_query_mad(in_mad);
in_mad->attr_id = IB_SMP_ATTR_PORT_INFO;
in_mad->attr_mod = cpu_to_be32(port);
if (mlx4_is_mfunc(dev->dev) && netw_view)
mad_ifc_flags |= MLX4_MAD_IFC_NET_VIEW;
err = mlx4_MAD_IFC(dev, mad_ifc_flags, port, NULL, NULL, in_mad, out_mad);
if (err)
goto out;
memcpy(gid->raw, out_mad->data + 8, 8);
if (mlx4_is_mfunc(dev->dev) && !netw_view) {
if (index) {
/* For any index > 0, return the null guid */
err = 0;
clear = 1;
goto out;
}
}
init_query_mad(in_mad);
in_mad->attr_id = IB_SMP_ATTR_GUID_INFO;
in_mad->attr_mod = cpu_to_be32(index / 8);
err = mlx4_MAD_IFC(dev, mad_ifc_flags, port,
NULL, NULL, in_mad, out_mad);
if (err)
goto out;
memcpy(gid->raw + 8, out_mad->data + (index % 8) * 8, 8);
out:
if (clear)
memset(gid->raw + 8, 0, 8);
kfree(in_mad);
kfree(out_mad);
return err;
}
static int iboe_query_gid(struct ib_device *ibdev, u8 port, int index,
union ib_gid *gid)
{
struct mlx4_ib_dev *dev = to_mdev(ibdev);
*gid = dev->iboe.gid_table[port - 1][index];
return 0;
}
static int mlx4_ib_query_gid(struct ib_device *ibdev, u8 port, int index,
union ib_gid *gid)
{
if (rdma_port_get_link_layer(ibdev, port) == IB_LINK_LAYER_INFINIBAND)
return __mlx4_ib_query_gid(ibdev, port, index, gid, 0);
else
return iboe_query_gid(ibdev, port, index, gid);
}
int __mlx4_ib_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
u16 *pkey, int netw_view)
{
struct ib_smp *in_mad = NULL;
struct ib_smp *out_mad = NULL;
int mad_ifc_flags = MLX4_MAD_IFC_IGNORE_KEYS;
int err = -ENOMEM;
in_mad = kzalloc(sizeof *in_mad, GFP_KERNEL);
out_mad = kmalloc(sizeof *out_mad, GFP_KERNEL);
if (!in_mad || !out_mad)
goto out;
init_query_mad(in_mad);
in_mad->attr_id = IB_SMP_ATTR_PKEY_TABLE;
in_mad->attr_mod = cpu_to_be32(index / 32);
if (mlx4_is_mfunc(to_mdev(ibdev)->dev) && netw_view)
mad_ifc_flags |= MLX4_MAD_IFC_NET_VIEW;
err = mlx4_MAD_IFC(to_mdev(ibdev), mad_ifc_flags, port, NULL, NULL,
in_mad, out_mad);
if (err)
goto out;
*pkey = be16_to_cpu(((__be16 *) out_mad->data)[index % 32]);
out:
kfree(in_mad);
kfree(out_mad);
return err;
}
static int mlx4_ib_query_pkey(struct ib_device *ibdev, u8 port, u16 index, u16 *pkey)
{
return __mlx4_ib_query_pkey(ibdev, port, index, pkey, 0);
}
static int mlx4_ib_modify_device(struct ib_device *ibdev, int mask,
struct ib_device_modify *props)
{
struct mlx4_cmd_mailbox *mailbox;
IB/mlx4: Fix possible deadlock on sm_lock spinlock The sm_lock spinlock is taken in the process context by mlx4_ib_modify_device, and in the interrupt context by update_sm_ah, so we need to take that spinlock with irqsave, and release it with irqrestore. Lockdeps reports this as follows: [ INFO: inconsistent lock state ] 3.5.0+ #20 Not tainted inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&ibdev->sm_lock)->rlock){?.+...}, at: [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib] {HARDIRQ-ON-W} state was registered at: [<ffffffff810b84a0>] mark_irqflags+0x120/0x190 [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0 [<ffffffff810b9f51>] lock_acquire+0xb1/0x150 [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50 [<ffffffffa028d563>] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib] [<ffffffffa026d1fc>] ib_modify_device+0x1c/0x20 [ib_core] [<ffffffffa026c353>] set_node_desc+0x83/0xc0 [ib_core] [<ffffffff8136a150>] dev_attr_store+0x20/0x30 [<ffffffff81201fd6>] sysfs_write_file+0xe6/0x170 [<ffffffff8118da38>] vfs_write+0xc8/0x190 [<ffffffff8118dc01>] sys_write+0x51/0x90 [<ffffffff8155b869>] system_call_fastpath+0x16/0x1b ... *** DEADLOCK *** 1 lock held by swapper/0/0: stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20 Call Trace: <IRQ> [<ffffffff810b7bea>] print_usage_bug+0x18a/0x190 [<ffffffff810b7370>] ? print_irq_inversion_bug+0x210/0x210 [<ffffffff810b7fb2>] mark_lock_irq+0xf2/0x280 [<ffffffff810b8290>] mark_lock+0x150/0x240 [<ffffffff810b84ef>] mark_irqflags+0x16f/0x190 [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff810b9f51>] lock_acquire+0xb1/0x150 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffffa026b2fa>] ? ib_create_ah+0x1a/0x40 [ib_core] [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff810c27c3>] ? is_module_address+0x23/0x30 [<ffffffffa028b05b>] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib] [<ffffffffa028c177>] mlx4_ib_event+0x117/0x160 [mlx4_ib] [<ffffffff81552501>] ? _raw_spin_lock_irqsave+0x61/0x70 [<ffffffffa022718c>] mlx4_dispatch_event+0x6c/0x90 [mlx4_core] [<ffffffffa0221b40>] mlx4_eq_int+0x500/0x950 [mlx4_core] Reported by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-03 02:26:45 -06:00
unsigned long flags;
if (mask & ~IB_DEVICE_MODIFY_NODE_DESC)
return -EOPNOTSUPP;
if (!(mask & IB_DEVICE_MODIFY_NODE_DESC))
return 0;
if (mlx4_is_slave(to_mdev(ibdev)->dev))
return -EOPNOTSUPP;
IB/mlx4: Fix possible deadlock on sm_lock spinlock The sm_lock spinlock is taken in the process context by mlx4_ib_modify_device, and in the interrupt context by update_sm_ah, so we need to take that spinlock with irqsave, and release it with irqrestore. Lockdeps reports this as follows: [ INFO: inconsistent lock state ] 3.5.0+ #20 Not tainted inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&ibdev->sm_lock)->rlock){?.+...}, at: [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib] {HARDIRQ-ON-W} state was registered at: [<ffffffff810b84a0>] mark_irqflags+0x120/0x190 [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0 [<ffffffff810b9f51>] lock_acquire+0xb1/0x150 [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50 [<ffffffffa028d563>] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib] [<ffffffffa026d1fc>] ib_modify_device+0x1c/0x20 [ib_core] [<ffffffffa026c353>] set_node_desc+0x83/0xc0 [ib_core] [<ffffffff8136a150>] dev_attr_store+0x20/0x30 [<ffffffff81201fd6>] sysfs_write_file+0xe6/0x170 [<ffffffff8118da38>] vfs_write+0xc8/0x190 [<ffffffff8118dc01>] sys_write+0x51/0x90 [<ffffffff8155b869>] system_call_fastpath+0x16/0x1b ... *** DEADLOCK *** 1 lock held by swapper/0/0: stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20 Call Trace: <IRQ> [<ffffffff810b7bea>] print_usage_bug+0x18a/0x190 [<ffffffff810b7370>] ? print_irq_inversion_bug+0x210/0x210 [<ffffffff810b7fb2>] mark_lock_irq+0xf2/0x280 [<ffffffff810b8290>] mark_lock+0x150/0x240 [<ffffffff810b84ef>] mark_irqflags+0x16f/0x190 [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff810b9f51>] lock_acquire+0xb1/0x150 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffffa026b2fa>] ? ib_create_ah+0x1a/0x40 [ib_core] [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff810c27c3>] ? is_module_address+0x23/0x30 [<ffffffffa028b05b>] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib] [<ffffffffa028c177>] mlx4_ib_event+0x117/0x160 [mlx4_ib] [<ffffffff81552501>] ? _raw_spin_lock_irqsave+0x61/0x70 [<ffffffffa022718c>] mlx4_dispatch_event+0x6c/0x90 [mlx4_core] [<ffffffffa0221b40>] mlx4_eq_int+0x500/0x950 [mlx4_core] Reported by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-03 02:26:45 -06:00
spin_lock_irqsave(&to_mdev(ibdev)->sm_lock, flags);
memcpy(ibdev->node_desc, props->node_desc, 64);
IB/mlx4: Fix possible deadlock on sm_lock spinlock The sm_lock spinlock is taken in the process context by mlx4_ib_modify_device, and in the interrupt context by update_sm_ah, so we need to take that spinlock with irqsave, and release it with irqrestore. Lockdeps reports this as follows: [ INFO: inconsistent lock state ] 3.5.0+ #20 Not tainted inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/0/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&ibdev->sm_lock)->rlock){?.+...}, at: [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib] {HARDIRQ-ON-W} state was registered at: [<ffffffff810b84a0>] mark_irqflags+0x120/0x190 [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0 [<ffffffff810b9f51>] lock_acquire+0xb1/0x150 [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50 [<ffffffffa028d563>] mlx4_ib_modify_device+0x63/0x240 [mlx4_ib] [<ffffffffa026d1fc>] ib_modify_device+0x1c/0x20 [ib_core] [<ffffffffa026c353>] set_node_desc+0x83/0xc0 [ib_core] [<ffffffff8136a150>] dev_attr_store+0x20/0x30 [<ffffffff81201fd6>] sysfs_write_file+0xe6/0x170 [<ffffffff8118da38>] vfs_write+0xc8/0x190 [<ffffffff8118dc01>] sys_write+0x51/0x90 [<ffffffff8155b869>] system_call_fastpath+0x16/0x1b ... *** DEADLOCK *** 1 lock held by swapper/0/0: stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.5.0+ #20 Call Trace: <IRQ> [<ffffffff810b7bea>] print_usage_bug+0x18a/0x190 [<ffffffff810b7370>] ? print_irq_inversion_bug+0x210/0x210 [<ffffffff810b7fb2>] mark_lock_irq+0xf2/0x280 [<ffffffff810b8290>] mark_lock+0x150/0x240 [<ffffffff810b84ef>] mark_irqflags+0x16f/0x190 [<ffffffff810b9ce7>] __lock_acquire+0x307/0x4c0 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff810b9f51>] lock_acquire+0xb1/0x150 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff815523b1>] _raw_spin_lock+0x41/0x50 [<ffffffffa028af1d>] ? update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffffa026b2fa>] ? ib_create_ah+0x1a/0x40 [ib_core] [<ffffffffa028af1d>] update_sm_ah+0xad/0x100 [mlx4_ib] [<ffffffff810c27c3>] ? is_module_address+0x23/0x30 [<ffffffffa028b05b>] handle_port_mgmt_change_event+0xeb/0x150 [mlx4_ib] [<ffffffffa028c177>] mlx4_ib_event+0x117/0x160 [mlx4_ib] [<ffffffff81552501>] ? _raw_spin_lock_irqsave+0x61/0x70 [<ffffffffa022718c>] mlx4_dispatch_event+0x6c/0x90 [mlx4_core] [<ffffffffa0221b40>] mlx4_eq_int+0x500/0x950 [mlx4_core] Reported by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-08-03 02:26:45 -06:00
spin_unlock_irqrestore(&to_mdev(ibdev)->sm_lock, flags);
/*
* If possible, pass node desc to FW, so it can generate
* a 144 trap. If cmd fails, just ignore.
*/
mailbox = mlx4_alloc_cmd_mailbox(to_mdev(ibdev)->dev);
if (IS_ERR(mailbox))
return 0;
memcpy(mailbox->buf, props->node_desc, 64);
mlx4_cmd(to_mdev(ibdev)->dev, mailbox->dma, 1, 0,
MLX4_CMD_SET_NODE, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE);
mlx4_free_cmd_mailbox(to_mdev(ibdev)->dev, mailbox);
return 0;
}
static int mlx4_ib_SET_PORT(struct mlx4_ib_dev *dev, u8 port, int reset_qkey_viols,
u32 cap_mask)
{
struct mlx4_cmd_mailbox *mailbox;
int err;
mailbox = mlx4_alloc_cmd_mailbox(dev->dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
if (dev->dev->flags & MLX4_FLAG_OLD_PORT_CMDS) {
*(u8 *) mailbox->buf = !!reset_qkey_viols << 6;
((__be32 *) mailbox->buf)[2] = cpu_to_be32(cap_mask);
} else {
((u8 *) mailbox->buf)[3] = !!reset_qkey_viols;
((__be32 *) mailbox->buf)[1] = cpu_to_be32(cap_mask);
}
err = mlx4_cmd(dev->dev, mailbox->dma, port, 0, MLX4_CMD_SET_PORT,
MLX4_CMD_TIME_CLASS_B, MLX4_CMD_WRAPPED);
mlx4_free_cmd_mailbox(dev->dev, mailbox);
return err;
}
static int mlx4_ib_modify_port(struct ib_device *ibdev, u8 port, int mask,
struct ib_port_modify *props)
{
struct mlx4_ib_dev *mdev = to_mdev(ibdev);
u8 is_eth = mdev->dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH;
struct ib_port_attr attr;
u32 cap_mask;
int err;
/* return OK if this is RoCE. CM calls ib_modify_port() regardless
* of whether port link layer is ETH or IB. For ETH ports, qkey
* violations and port capabilities are not meaningful.
*/
if (is_eth)
return 0;
mutex_lock(&mdev->cap_mask_mutex);
err = mlx4_ib_query_port(ibdev, port, &attr);
if (err)
goto out;
cap_mask = (attr.port_cap_flags | props->set_port_cap_mask) &
~props->clr_port_cap_mask;
err = mlx4_ib_SET_PORT(mdev, port,
!!(mask & IB_PORT_RESET_QKEY_CNTR),
cap_mask);
out:
mutex_unlock(&to_mdev(ibdev)->cap_mask_mutex);
return err;
}
static struct ib_ucontext *mlx4_ib_alloc_ucontext(struct ib_device *ibdev,
struct ib_udata *udata)
{
struct mlx4_ib_dev *dev = to_mdev(ibdev);
struct mlx4_ib_ucontext *context;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
struct mlx4_ib_alloc_ucontext_resp_v3 resp_v3;
struct mlx4_ib_alloc_ucontext_resp resp;
int err;
if (!dev->ib_active)
return ERR_PTR(-EAGAIN);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
if (ibdev->uverbs_abi_ver == MLX4_IB_UVERBS_NO_DEV_CAPS_ABI_VERSION) {
resp_v3.qp_tab_size = dev->dev->caps.num_qps;
resp_v3.bf_reg_size = dev->dev->caps.bf_reg_size;
resp_v3.bf_regs_per_page = dev->dev->caps.bf_regs_per_page;
} else {
resp.dev_caps = dev->dev->caps.userspace_caps;
resp.qp_tab_size = dev->dev->caps.num_qps;
resp.bf_reg_size = dev->dev->caps.bf_reg_size;
resp.bf_regs_per_page = dev->dev->caps.bf_regs_per_page;
resp.cqe_size = dev->dev->caps.cqe_size;
}
context = kmalloc(sizeof *context, GFP_KERNEL);
if (!context)
return ERR_PTR(-ENOMEM);
err = mlx4_uar_alloc(to_mdev(ibdev)->dev, &context->uar);
if (err) {
kfree(context);
return ERR_PTR(err);
}
INIT_LIST_HEAD(&context->db_page_list);
mutex_init(&context->db_page_mutex);
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
if (ibdev->uverbs_abi_ver == MLX4_IB_UVERBS_NO_DEV_CAPS_ABI_VERSION)
err = ib_copy_to_udata(udata, &resp_v3, sizeof(resp_v3));
else
err = ib_copy_to_udata(udata, &resp, sizeof(resp));
if (err) {
mlx4_uar_free(to_mdev(ibdev)->dev, &context->uar);
kfree(context);
return ERR_PTR(-EFAULT);
}
return &context->ibucontext;
}
static int mlx4_ib_dealloc_ucontext(struct ib_ucontext *ibcontext)
{
struct mlx4_ib_ucontext *context = to_mucontext(ibcontext);
mlx4_uar_free(to_mdev(ibcontext->device)->dev, &context->uar);
kfree(context);
return 0;
}
static int mlx4_ib_mmap(struct ib_ucontext *context, struct vm_area_struct *vma)
{
struct mlx4_ib_dev *dev = to_mdev(context->device);
if (vma->vm_end - vma->vm_start != PAGE_SIZE)
return -EINVAL;
if (vma->vm_pgoff == 0) {
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (io_remap_pfn_range(vma, vma->vm_start,
to_mucontext(context)->uar.pfn,
PAGE_SIZE, vma->vm_page_prot))
return -EAGAIN;
} else if (vma->vm_pgoff == 1 && dev->dev->caps.bf_reg_size != 0) {
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
if (io_remap_pfn_range(vma, vma->vm_start,
to_mucontext(context)->uar.pfn +
dev->dev->caps.num_uars,
PAGE_SIZE, vma->vm_page_prot))
return -EAGAIN;
} else
return -EINVAL;
return 0;
}
static struct ib_pd *mlx4_ib_alloc_pd(struct ib_device *ibdev,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct mlx4_ib_pd *pd;
int err;
pd = kmalloc(sizeof *pd, GFP_KERNEL);
if (!pd)
return ERR_PTR(-ENOMEM);
err = mlx4_pd_alloc(to_mdev(ibdev)->dev, &pd->pdn);
if (err) {
kfree(pd);
return ERR_PTR(err);
}
if (context)
if (ib_copy_to_udata(udata, &pd->pdn, sizeof (__u32))) {
mlx4_pd_free(to_mdev(ibdev)->dev, pd->pdn);
kfree(pd);
return ERR_PTR(-EFAULT);
}
return &pd->ibpd;
}
static int mlx4_ib_dealloc_pd(struct ib_pd *pd)
{
mlx4_pd_free(to_mdev(pd->device)->dev, to_mpd(pd)->pdn);
kfree(pd);
return 0;
}
static struct ib_xrcd *mlx4_ib_alloc_xrcd(struct ib_device *ibdev,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct mlx4_ib_xrcd *xrcd;
int err;
if (!(to_mdev(ibdev)->dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC))
return ERR_PTR(-ENOSYS);
xrcd = kmalloc(sizeof *xrcd, GFP_KERNEL);
if (!xrcd)
return ERR_PTR(-ENOMEM);
err = mlx4_xrcd_alloc(to_mdev(ibdev)->dev, &xrcd->xrcdn);
if (err)
goto err1;
xrcd->pd = ib_alloc_pd(ibdev);
if (IS_ERR(xrcd->pd)) {
err = PTR_ERR(xrcd->pd);
goto err2;
}
xrcd->cq = ib_create_cq(ibdev, NULL, NULL, xrcd, 1, 0);
if (IS_ERR(xrcd->cq)) {
err = PTR_ERR(xrcd->cq);
goto err3;
}
return &xrcd->ibxrcd;
err3:
ib_dealloc_pd(xrcd->pd);
err2:
mlx4_xrcd_free(to_mdev(ibdev)->dev, xrcd->xrcdn);
err1:
kfree(xrcd);
return ERR_PTR(err);
}
static int mlx4_ib_dealloc_xrcd(struct ib_xrcd *xrcd)
{
ib_destroy_cq(to_mxrcd(xrcd)->cq);
ib_dealloc_pd(to_mxrcd(xrcd)->pd);
mlx4_xrcd_free(to_mdev(xrcd->device)->dev, to_mxrcd(xrcd)->xrcdn);
kfree(xrcd);
return 0;
}
static int add_gid_entry(struct ib_qp *ibqp, union ib_gid *gid)
{
struct mlx4_ib_qp *mqp = to_mqp(ibqp);
struct mlx4_ib_dev *mdev = to_mdev(ibqp->device);
struct mlx4_ib_gid_entry *ge;
ge = kzalloc(sizeof *ge, GFP_KERNEL);
if (!ge)
return -ENOMEM;
ge->gid = *gid;
if (mlx4_ib_add_mc(mdev, mqp, gid)) {
ge->port = mqp->port;
ge->added = 1;
}
mutex_lock(&mqp->mutex);
list_add_tail(&ge->list, &mqp->gid_list);
mutex_unlock(&mqp->mutex);
return 0;
}
int mlx4_ib_add_mc(struct mlx4_ib_dev *mdev, struct mlx4_ib_qp *mqp,
union ib_gid *gid)
{
struct net_device *ndev;
int ret = 0;
if (!mqp->port)
return 0;
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_lock_bh(&mdev->iboe.lock);
ndev = mdev->iboe.netdevs[mqp->port - 1];
if (ndev)
dev_hold(ndev);
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_unlock_bh(&mdev->iboe.lock);
if (ndev) {
ret = 1;
dev_put(ndev);
}
return ret;
}
struct mlx4_ib_steering {
struct list_head list;
struct mlx4_flow_reg_id reg_id;
union ib_gid gid;
};
static int parse_flow_attr(struct mlx4_dev *dev,
u32 qp_num,
union ib_flow_spec *ib_spec,
struct _rule_hw *mlx4_spec)
{
enum mlx4_net_trans_rule_id type;
switch (ib_spec->type) {
case IB_FLOW_SPEC_ETH:
type = MLX4_NET_TRANS_RULE_ID_ETH;
memcpy(mlx4_spec->eth.dst_mac, ib_spec->eth.val.dst_mac,
ETH_ALEN);
memcpy(mlx4_spec->eth.dst_mac_msk, ib_spec->eth.mask.dst_mac,
ETH_ALEN);
mlx4_spec->eth.vlan_tag = ib_spec->eth.val.vlan_tag;
mlx4_spec->eth.vlan_tag_msk = ib_spec->eth.mask.vlan_tag;
break;
case IB_FLOW_SPEC_IB:
type = MLX4_NET_TRANS_RULE_ID_IB;
mlx4_spec->ib.l3_qpn =
cpu_to_be32(qp_num);
mlx4_spec->ib.qpn_mask =
cpu_to_be32(MLX4_IB_FLOW_QPN_MASK);
break;
case IB_FLOW_SPEC_IPV4:
type = MLX4_NET_TRANS_RULE_ID_IPV4;
mlx4_spec->ipv4.src_ip = ib_spec->ipv4.val.src_ip;
mlx4_spec->ipv4.src_ip_msk = ib_spec->ipv4.mask.src_ip;
mlx4_spec->ipv4.dst_ip = ib_spec->ipv4.val.dst_ip;
mlx4_spec->ipv4.dst_ip_msk = ib_spec->ipv4.mask.dst_ip;
break;
case IB_FLOW_SPEC_TCP:
case IB_FLOW_SPEC_UDP:
type = ib_spec->type == IB_FLOW_SPEC_TCP ?
MLX4_NET_TRANS_RULE_ID_TCP :
MLX4_NET_TRANS_RULE_ID_UDP;
mlx4_spec->tcp_udp.dst_port = ib_spec->tcp_udp.val.dst_port;
mlx4_spec->tcp_udp.dst_port_msk = ib_spec->tcp_udp.mask.dst_port;
mlx4_spec->tcp_udp.src_port = ib_spec->tcp_udp.val.src_port;
mlx4_spec->tcp_udp.src_port_msk = ib_spec->tcp_udp.mask.src_port;
break;
default:
return -EINVAL;
}
if (mlx4_map_sw_to_hw_steering_id(dev, type) < 0 ||
mlx4_hw_rule_sz(dev, type) < 0)
return -EINVAL;
mlx4_spec->id = cpu_to_be16(mlx4_map_sw_to_hw_steering_id(dev, type));
mlx4_spec->size = mlx4_hw_rule_sz(dev, type) >> 2;
return mlx4_hw_rule_sz(dev, type);
}
struct default_rules {
__u32 mandatory_fields[IB_FLOW_SPEC_SUPPORT_LAYERS];
__u32 mandatory_not_fields[IB_FLOW_SPEC_SUPPORT_LAYERS];
__u32 rules_create_list[IB_FLOW_SPEC_SUPPORT_LAYERS];
__u8 link_layer;
};
static const struct default_rules default_table[] = {
{
.mandatory_fields = {IB_FLOW_SPEC_IPV4},
.mandatory_not_fields = {IB_FLOW_SPEC_ETH},
.rules_create_list = {IB_FLOW_SPEC_IB},
.link_layer = IB_LINK_LAYER_INFINIBAND
}
};
static int __mlx4_ib_default_rules_match(struct ib_qp *qp,
struct ib_flow_attr *flow_attr)
{
int i, j, k;
void *ib_flow;
const struct default_rules *pdefault_rules = default_table;
u8 link_layer = rdma_port_get_link_layer(qp->device, flow_attr->port);
for (i = 0; i < ARRAY_SIZE(default_table); i++, pdefault_rules++) {
__u32 field_types[IB_FLOW_SPEC_SUPPORT_LAYERS];
memset(&field_types, 0, sizeof(field_types));
if (link_layer != pdefault_rules->link_layer)
continue;
ib_flow = flow_attr + 1;
/* we assume the specs are sorted */
for (j = 0, k = 0; k < IB_FLOW_SPEC_SUPPORT_LAYERS &&
j < flow_attr->num_of_specs; k++) {
union ib_flow_spec *current_flow =
(union ib_flow_spec *)ib_flow;
/* same layer but different type */
if (((current_flow->type & IB_FLOW_SPEC_LAYER_MASK) ==
(pdefault_rules->mandatory_fields[k] &
IB_FLOW_SPEC_LAYER_MASK)) &&
(current_flow->type !=
pdefault_rules->mandatory_fields[k]))
goto out;
/* same layer, try match next one */
if (current_flow->type ==
pdefault_rules->mandatory_fields[k]) {
j++;
ib_flow +=
((union ib_flow_spec *)ib_flow)->size;
}
}
ib_flow = flow_attr + 1;
for (j = 0; j < flow_attr->num_of_specs;
j++, ib_flow += ((union ib_flow_spec *)ib_flow)->size)
for (k = 0; k < IB_FLOW_SPEC_SUPPORT_LAYERS; k++)
/* same layer and same type */
if (((union ib_flow_spec *)ib_flow)->type ==
pdefault_rules->mandatory_not_fields[k])
goto out;
return i;
}
out:
return -1;
}
static int __mlx4_ib_create_default_rules(
struct mlx4_ib_dev *mdev,
struct ib_qp *qp,
const struct default_rules *pdefault_rules,
struct _rule_hw *mlx4_spec) {
int size = 0;
int i;
for (i = 0; i < ARRAY_SIZE(pdefault_rules->rules_create_list); i++) {
int ret;
union ib_flow_spec ib_spec;
switch (pdefault_rules->rules_create_list[i]) {
case 0:
/* no rule */
continue;
case IB_FLOW_SPEC_IB:
ib_spec.type = IB_FLOW_SPEC_IB;
ib_spec.size = sizeof(struct ib_flow_spec_ib);
break;
default:
/* invalid rule */
return -EINVAL;
}
/* We must put empty rule, qpn is being ignored */
ret = parse_flow_attr(mdev->dev, 0, &ib_spec,
mlx4_spec);
if (ret < 0) {
pr_info("invalid parsing\n");
return -EINVAL;
}
mlx4_spec = (void *)mlx4_spec + ret;
size += ret;
}
return size;
}
static int __mlx4_ib_create_flow(struct ib_qp *qp, struct ib_flow_attr *flow_attr,
int domain,
enum mlx4_net_trans_promisc_mode flow_type,
u64 *reg_id)
{
int ret, i;
int size = 0;
void *ib_flow;
struct mlx4_ib_dev *mdev = to_mdev(qp->device);
struct mlx4_cmd_mailbox *mailbox;
struct mlx4_net_trans_rule_hw_ctrl *ctrl;
int default_flow;
static const u16 __mlx4_domain[] = {
[IB_FLOW_DOMAIN_USER] = MLX4_DOMAIN_UVERBS,
[IB_FLOW_DOMAIN_ETHTOOL] = MLX4_DOMAIN_ETHTOOL,
[IB_FLOW_DOMAIN_RFS] = MLX4_DOMAIN_RFS,
[IB_FLOW_DOMAIN_NIC] = MLX4_DOMAIN_NIC,
};
if (flow_attr->priority > MLX4_IB_FLOW_MAX_PRIO) {
pr_err("Invalid priority value %d\n", flow_attr->priority);
return -EINVAL;
}
if (domain >= IB_FLOW_DOMAIN_NUM) {
pr_err("Invalid domain value %d\n", domain);
return -EINVAL;
}
if (mlx4_map_sw_to_hw_steering_mode(mdev->dev, flow_type) < 0)
return -EINVAL;
mailbox = mlx4_alloc_cmd_mailbox(mdev->dev);
if (IS_ERR(mailbox))
return PTR_ERR(mailbox);
ctrl = mailbox->buf;
ctrl->prio = cpu_to_be16(__mlx4_domain[domain] |
flow_attr->priority);
ctrl->type = mlx4_map_sw_to_hw_steering_mode(mdev->dev, flow_type);
ctrl->port = flow_attr->port;
ctrl->qpn = cpu_to_be32(qp->qp_num);
ib_flow = flow_attr + 1;
size += sizeof(struct mlx4_net_trans_rule_hw_ctrl);
/* Add default flows */
default_flow = __mlx4_ib_default_rules_match(qp, flow_attr);
if (default_flow >= 0) {
ret = __mlx4_ib_create_default_rules(
mdev, qp, default_table + default_flow,
mailbox->buf + size);
if (ret < 0) {
mlx4_free_cmd_mailbox(mdev->dev, mailbox);
return -EINVAL;
}
size += ret;
}
for (i = 0; i < flow_attr->num_of_specs; i++) {
ret = parse_flow_attr(mdev->dev, qp->qp_num, ib_flow,
mailbox->buf + size);
if (ret < 0) {
mlx4_free_cmd_mailbox(mdev->dev, mailbox);
return -EINVAL;
}
ib_flow += ((union ib_flow_spec *) ib_flow)->size;
size += ret;
}
ret = mlx4_cmd_imm(mdev->dev, mailbox->dma, reg_id, size >> 2, 0,
MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
if (ret == -ENOMEM)
pr_err("mcg table is full. Fail to register network rule.\n");
else if (ret == -ENXIO)
pr_err("Device managed flow steering is disabled. Fail to register network rule.\n");
else if (ret)
pr_err("Invalid argumant. Fail to register network rule.\n");
mlx4_free_cmd_mailbox(mdev->dev, mailbox);
return ret;
}
static int __mlx4_ib_destroy_flow(struct mlx4_dev *dev, u64 reg_id)
{
int err;
err = mlx4_cmd(dev, reg_id, 0, 0,
MLX4_QP_FLOW_STEERING_DETACH, MLX4_CMD_TIME_CLASS_A,
MLX4_CMD_NATIVE);
if (err)
pr_err("Fail to detach network rule. registration id = 0x%llx\n",
reg_id);
return err;
}
static int mlx4_ib_tunnel_steer_add(struct ib_qp *qp, struct ib_flow_attr *flow_attr,
u64 *reg_id)
{
void *ib_flow;
union ib_flow_spec *ib_spec;
struct mlx4_dev *dev = to_mdev(qp->device)->dev;
int err = 0;
if (dev->caps.tunnel_offload_mode != MLX4_TUNNEL_OFFLOAD_MODE_VXLAN ||
dev->caps.dmfs_high_steer_mode == MLX4_STEERING_DMFS_A0_STATIC)
return 0; /* do nothing */
ib_flow = flow_attr + 1;
ib_spec = (union ib_flow_spec *)ib_flow;
if (ib_spec->type != IB_FLOW_SPEC_ETH || flow_attr->num_of_specs != 1)
return 0; /* do nothing */
err = mlx4_tunnel_steer_add(to_mdev(qp->device)->dev, ib_spec->eth.val.dst_mac,
flow_attr->port, qp->qp_num,
MLX4_DOMAIN_UVERBS | (flow_attr->priority & 0xff),
reg_id);
return err;
}
static struct ib_flow *mlx4_ib_create_flow(struct ib_qp *qp,
struct ib_flow_attr *flow_attr,
int domain)
{
int err = 0, i = 0, j = 0;
struct mlx4_ib_flow *mflow;
enum mlx4_net_trans_promisc_mode type[2];
struct mlx4_dev *dev = (to_mdev(qp->device))->dev;
int is_bonded = mlx4_is_bonded(dev);
memset(type, 0, sizeof(type));
mflow = kzalloc(sizeof(*mflow), GFP_KERNEL);
if (!mflow) {
err = -ENOMEM;
goto err_free;
}
switch (flow_attr->type) {
case IB_FLOW_ATTR_NORMAL:
type[0] = MLX4_FS_REGULAR;
break;
case IB_FLOW_ATTR_ALL_DEFAULT:
type[0] = MLX4_FS_ALL_DEFAULT;
break;
case IB_FLOW_ATTR_MC_DEFAULT:
type[0] = MLX4_FS_MC_DEFAULT;
break;
case IB_FLOW_ATTR_SNIFFER:
type[0] = MLX4_FS_UC_SNIFFER;
type[1] = MLX4_FS_MC_SNIFFER;
break;
default:
err = -EINVAL;
goto err_free;
}
while (i < ARRAY_SIZE(type) && type[i]) {
err = __mlx4_ib_create_flow(qp, flow_attr, domain, type[i],
&mflow->reg_id[i].id);
if (err)
goto err_create_flow;
i++;
if (is_bonded) {
/* Application always sees one port so the mirror rule
* must be on port #2
*/
flow_attr->port = 2;
err = __mlx4_ib_create_flow(qp, flow_attr,
domain, type[j],
&mflow->reg_id[j].mirror);
flow_attr->port = 1;
if (err)
goto err_create_flow;
j++;
}
}
if (i < ARRAY_SIZE(type) && flow_attr->type == IB_FLOW_ATTR_NORMAL) {
err = mlx4_ib_tunnel_steer_add(qp, flow_attr,
&mflow->reg_id[i].id);
if (err)
goto err_create_flow;
i++;
if (is_bonded) {
flow_attr->port = 2;
err = mlx4_ib_tunnel_steer_add(qp, flow_attr,
&mflow->reg_id[j].mirror);
flow_attr->port = 1;
if (err)
goto err_create_flow;
j++;
}
/* function to create mirror rule */
}
return &mflow->ibflow;
err_create_flow:
while (i) {
(void)__mlx4_ib_destroy_flow(to_mdev(qp->device)->dev,
mflow->reg_id[i].id);
i--;
}
while (j) {
(void)__mlx4_ib_destroy_flow(to_mdev(qp->device)->dev,
mflow->reg_id[j].mirror);
j--;
}
err_free:
kfree(mflow);
return ERR_PTR(err);
}
static int mlx4_ib_destroy_flow(struct ib_flow *flow_id)
{
int err, ret = 0;
int i = 0;
struct mlx4_ib_dev *mdev = to_mdev(flow_id->qp->device);
struct mlx4_ib_flow *mflow = to_mflow(flow_id);
while (i < ARRAY_SIZE(mflow->reg_id) && mflow->reg_id[i].id) {
err = __mlx4_ib_destroy_flow(mdev->dev, mflow->reg_id[i].id);
if (err)
ret = err;
if (mflow->reg_id[i].mirror) {
err = __mlx4_ib_destroy_flow(mdev->dev,
mflow->reg_id[i].mirror);
if (err)
ret = err;
}
i++;
}
kfree(mflow);
return ret;
}
static int mlx4_ib_mcg_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
int err;
struct mlx4_ib_dev *mdev = to_mdev(ibqp->device);
struct mlx4_dev *dev = mdev->dev;
struct mlx4_ib_qp *mqp = to_mqp(ibqp);
struct mlx4_ib_steering *ib_steering = NULL;
enum mlx4_protocol prot = MLX4_PROT_IB_IPV6;
struct mlx4_flow_reg_id reg_id;
if (mdev->dev->caps.steering_mode ==
MLX4_STEERING_MODE_DEVICE_MANAGED) {
ib_steering = kmalloc(sizeof(*ib_steering), GFP_KERNEL);
if (!ib_steering)
return -ENOMEM;
}
err = mlx4_multicast_attach(mdev->dev, &mqp->mqp, gid->raw, mqp->port,
!!(mqp->flags &
MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK),
prot, &reg_id.id);
if (err) {
pr_err("multicast attach op failed, err %d\n", err);
goto err_malloc;
}
reg_id.mirror = 0;
if (mlx4_is_bonded(dev)) {
err = mlx4_multicast_attach(mdev->dev, &mqp->mqp, gid->raw,
(mqp->port == 1) ? 2 : 1,
!!(mqp->flags &
MLX4_IB_QP_BLOCK_MULTICAST_LOOPBACK),
prot, &reg_id.mirror);
if (err)
goto err_add;
}
err = add_gid_entry(ibqp, gid);
if (err)
goto err_add;
if (ib_steering) {
memcpy(ib_steering->gid.raw, gid->raw, 16);
ib_steering->reg_id = reg_id;
mutex_lock(&mqp->mutex);
list_add(&ib_steering->list, &mqp->steering_rules);
mutex_unlock(&mqp->mutex);
}
return 0;
err_add:
mlx4_multicast_detach(mdev->dev, &mqp->mqp, gid->raw,
prot, reg_id.id);
if (reg_id.mirror)
mlx4_multicast_detach(mdev->dev, &mqp->mqp, gid->raw,
prot, reg_id.mirror);
err_malloc:
kfree(ib_steering);
return err;
}
static struct mlx4_ib_gid_entry *find_gid_entry(struct mlx4_ib_qp *qp, u8 *raw)
{
struct mlx4_ib_gid_entry *ge;
struct mlx4_ib_gid_entry *tmp;
struct mlx4_ib_gid_entry *ret = NULL;
list_for_each_entry_safe(ge, tmp, &qp->gid_list, list) {
if (!memcmp(raw, ge->gid.raw, 16)) {
ret = ge;
break;
}
}
return ret;
}
static int mlx4_ib_mcg_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
int err;
struct mlx4_ib_dev *mdev = to_mdev(ibqp->device);
struct mlx4_dev *dev = mdev->dev;
struct mlx4_ib_qp *mqp = to_mqp(ibqp);
struct net_device *ndev;
struct mlx4_ib_gid_entry *ge;
struct mlx4_flow_reg_id reg_id = {0, 0};
enum mlx4_protocol prot = MLX4_PROT_IB_IPV6;
if (mdev->dev->caps.steering_mode ==
MLX4_STEERING_MODE_DEVICE_MANAGED) {
struct mlx4_ib_steering *ib_steering;
mutex_lock(&mqp->mutex);
list_for_each_entry(ib_steering, &mqp->steering_rules, list) {
if (!memcmp(ib_steering->gid.raw, gid->raw, 16)) {
list_del(&ib_steering->list);
break;
}
}
mutex_unlock(&mqp->mutex);
if (&ib_steering->list == &mqp->steering_rules) {
pr_err("Couldn't find reg_id for mgid. Steering rule is left attached\n");
return -EINVAL;
}
reg_id = ib_steering->reg_id;
kfree(ib_steering);
}
err = mlx4_multicast_detach(mdev->dev, &mqp->mqp, gid->raw,
prot, reg_id.id);
if (err)
return err;
if (mlx4_is_bonded(dev)) {
err = mlx4_multicast_detach(mdev->dev, &mqp->mqp, gid->raw,
prot, reg_id.mirror);
if (err)
return err;
}
mutex_lock(&mqp->mutex);
ge = find_gid_entry(mqp, gid->raw);
if (ge) {
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_lock_bh(&mdev->iboe.lock);
ndev = ge->added ? mdev->iboe.netdevs[ge->port - 1] : NULL;
if (ndev)
dev_hold(ndev);
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_unlock_bh(&mdev->iboe.lock);
if (ndev)
dev_put(ndev);
list_del(&ge->list);
kfree(ge);
} else
pr_warn("could not find mgid entry\n");
mutex_unlock(&mqp->mutex);
return 0;
}
static int init_node_data(struct mlx4_ib_dev *dev)
{
struct ib_smp *in_mad = NULL;
struct ib_smp *out_mad = NULL;
int mad_ifc_flags = MLX4_MAD_IFC_IGNORE_KEYS;
int err = -ENOMEM;
in_mad = kzalloc(sizeof *in_mad, GFP_KERNEL);
out_mad = kmalloc(sizeof *out_mad, GFP_KERNEL);
if (!in_mad || !out_mad)
goto out;
init_query_mad(in_mad);
in_mad->attr_id = IB_SMP_ATTR_NODE_DESC;
if (mlx4_is_master(dev->dev))
mad_ifc_flags |= MLX4_MAD_IFC_NET_VIEW;
err = mlx4_MAD_IFC(dev, mad_ifc_flags, 1, NULL, NULL, in_mad, out_mad);
if (err)
goto out;
memcpy(dev->ib_dev.node_desc, out_mad->data, 64);
in_mad->attr_id = IB_SMP_ATTR_NODE_INFO;
err = mlx4_MAD_IFC(dev, mad_ifc_flags, 1, NULL, NULL, in_mad, out_mad);
if (err)
goto out;
dev->dev->rev_id = be32_to_cpup((__be32 *) (out_mad->data + 32));
memcpy(&dev->ib_dev.node_guid, out_mad->data + 12, 8);
out:
kfree(in_mad);
kfree(out_mad);
return err;
}
static ssize_t show_hca(struct device *device, struct device_attribute *attr,
char *buf)
{
struct mlx4_ib_dev *dev =
container_of(device, struct mlx4_ib_dev, ib_dev.dev);
return sprintf(buf, "MT%d\n", dev->dev->persist->pdev->device);
}
static ssize_t show_fw_ver(struct device *device, struct device_attribute *attr,
char *buf)
{
struct mlx4_ib_dev *dev =
container_of(device, struct mlx4_ib_dev, ib_dev.dev);
return sprintf(buf, "%d.%d.%d\n", (int) (dev->dev->caps.fw_ver >> 32),
(int) (dev->dev->caps.fw_ver >> 16) & 0xffff,
(int) dev->dev->caps.fw_ver & 0xffff);
}
static ssize_t show_rev(struct device *device, struct device_attribute *attr,
char *buf)
{
struct mlx4_ib_dev *dev =
container_of(device, struct mlx4_ib_dev, ib_dev.dev);
return sprintf(buf, "%x\n", dev->dev->rev_id);
}
static ssize_t show_board(struct device *device, struct device_attribute *attr,
char *buf)
{
struct mlx4_ib_dev *dev =
container_of(device, struct mlx4_ib_dev, ib_dev.dev);
return sprintf(buf, "%.*s\n", MLX4_BOARD_ID_LEN,
dev->dev->board_id);
}
static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
static DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL);
static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL);
static DEVICE_ATTR(board_id, S_IRUGO, show_board, NULL);
static struct device_attribute *mlx4_class_attributes[] = {
&dev_attr_hw_rev,
&dev_attr_fw_ver,
&dev_attr_hca_type,
&dev_attr_board_id
};
static void mlx4_addrconf_ifid_eui48(u8 *eui, u16 vlan_id,
struct net_device *dev)
{
memcpy(eui, dev->dev_addr, 3);
memcpy(eui + 5, dev->dev_addr + 3, 3);
if (vlan_id < 0x1000) {
eui[3] = vlan_id >> 8;
eui[4] = vlan_id & 0xff;
} else {
eui[3] = 0xff;
eui[4] = 0xfe;
}
eui[0] ^= 2;
}
static void update_gids_task(struct work_struct *work)
{
struct update_gid_work *gw = container_of(work, struct update_gid_work, work);
struct mlx4_cmd_mailbox *mailbox;
union ib_gid *gids;
int err;
struct mlx4_dev *dev = gw->dev->dev;
int is_bonded = mlx4_is_bonded(dev);
if (!gw->dev->ib_active)
return;
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox)) {
pr_warn("update gid table failed %ld\n", PTR_ERR(mailbox));
return;
}
gids = mailbox->buf;
memcpy(gids, gw->gids, sizeof gw->gids);
err = mlx4_cmd(dev, mailbox->dma, MLX4_SET_PORT_GID_TABLE << 8 | gw->port,
1, MLX4_CMD_SET_PORT, MLX4_CMD_TIME_CLASS_B,
MLX4_CMD_WRAPPED);
if (err)
pr_warn("set port command failed\n");
else
if ((gw->port == 1) || !is_bonded)
mlx4_ib_dispatch_event(gw->dev,
is_bonded ? 1 : gw->port,
IB_EVENT_GID_CHANGE);
mlx4_free_cmd_mailbox(dev, mailbox);
kfree(gw);
}
static void reset_gids_task(struct work_struct *work)
{
struct update_gid_work *gw =
container_of(work, struct update_gid_work, work);
struct mlx4_cmd_mailbox *mailbox;
union ib_gid *gids;
int err;
struct mlx4_dev *dev = gw->dev->dev;
if (!gw->dev->ib_active)
return;
mailbox = mlx4_alloc_cmd_mailbox(dev);
if (IS_ERR(mailbox)) {
pr_warn("reset gid table failed\n");
goto free;
}
gids = mailbox->buf;
memcpy(gids, gw->gids, sizeof(gw->gids));
if (mlx4_ib_port_link_layer(&gw->dev->ib_dev, gw->port) ==
IB_LINK_LAYER_ETHERNET) {
err = mlx4_cmd(dev, mailbox->dma,
MLX4_SET_PORT_GID_TABLE << 8 | gw->port,
1, MLX4_CMD_SET_PORT,
MLX4_CMD_TIME_CLASS_B,
MLX4_CMD_WRAPPED);
if (err)
pr_warn(KERN_WARNING
"set port %d command failed\n", gw->port);
}
mlx4_free_cmd_mailbox(dev, mailbox);
free:
kfree(gw);
}
static int update_gid_table(struct mlx4_ib_dev *dev, int port,
union ib_gid *gid, int clear,
int default_gid)
{
struct update_gid_work *work;
int i;
int need_update = 0;
int free = -1;
int found = -1;
int max_gids;
if (default_gid) {
free = 0;
} else {
max_gids = dev->dev->caps.gid_table_len[port];
for (i = 1; i < max_gids; ++i) {
if (!memcmp(&dev->iboe.gid_table[port - 1][i], gid,
sizeof(*gid)))
found = i;
if (clear) {
if (found >= 0) {
need_update = 1;
dev->iboe.gid_table[port - 1][found] =
zgid;
break;
}
} else {
if (found >= 0)
break;
if (free < 0 &&
!memcmp(&dev->iboe.gid_table[port - 1][i],
&zgid, sizeof(*gid)))
free = i;
}
}
}
if (found == -1 && !clear && free >= 0) {
dev->iboe.gid_table[port - 1][free] = *gid;
need_update = 1;
}
if (!need_update)
return 0;
work = kzalloc(sizeof(*work), GFP_ATOMIC);
if (!work)
return -ENOMEM;
memcpy(work->gids, dev->iboe.gid_table[port - 1], sizeof(work->gids));
INIT_WORK(&work->work, update_gids_task);
work->port = port;
work->dev = dev;
queue_work(wq, &work->work);
return 0;
}
static void mlx4_make_default_gid(struct net_device *dev, union ib_gid *gid)
{
gid->global.subnet_prefix = cpu_to_be64(0xfe80000000000000LL);
mlx4_addrconf_ifid_eui48(&gid->raw[8], 0xffff, dev);
}
static int reset_gid_table(struct mlx4_ib_dev *dev, u8 port)
{
struct update_gid_work *work;
work = kzalloc(sizeof(*work), GFP_ATOMIC);
if (!work)
return -ENOMEM;
memset(dev->iboe.gid_table[port - 1], 0, sizeof(work->gids));
memset(work->gids, 0, sizeof(work->gids));
INIT_WORK(&work->work, reset_gids_task);
work->dev = dev;
work->port = port;
queue_work(wq, &work->work);
return 0;
}
static int mlx4_ib_addr_event(int event, struct net_device *event_netdev,
struct mlx4_ib_dev *ibdev, union ib_gid *gid)
{
struct mlx4_ib_iboe *iboe;
int port = 0;
struct net_device *real_dev = rdma_vlan_dev_real_dev(event_netdev) ?
rdma_vlan_dev_real_dev(event_netdev) :
event_netdev;
union ib_gid default_gid;
mlx4_make_default_gid(real_dev, &default_gid);
if (!memcmp(gid, &default_gid, sizeof(*gid)))
return 0;
if (event != NETDEV_DOWN && event != NETDEV_UP)
return 0;
if ((real_dev != event_netdev) &&
(event == NETDEV_DOWN) &&
rdma_link_local_addr((struct in6_addr *)gid))
return 0;
iboe = &ibdev->iboe;
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_lock_bh(&iboe->lock);
for (port = 1; port <= ibdev->dev->caps.num_ports; ++port)
if ((netif_is_bond_master(real_dev) &&
(real_dev == iboe->masters[port - 1])) ||
(!netif_is_bond_master(real_dev) &&
(real_dev == iboe->netdevs[port - 1])))
update_gid_table(ibdev, port, gid,
event == NETDEV_DOWN, 0);
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_unlock_bh(&iboe->lock);
return 0;
}
static u8 mlx4_ib_get_dev_port(struct net_device *dev,
struct mlx4_ib_dev *ibdev)
{
u8 port = 0;
struct mlx4_ib_iboe *iboe;
struct net_device *real_dev = rdma_vlan_dev_real_dev(dev) ?
rdma_vlan_dev_real_dev(dev) : dev;
iboe = &ibdev->iboe;
for (port = 1; port <= ibdev->dev->caps.num_ports; ++port)
if ((netif_is_bond_master(real_dev) &&
(real_dev == iboe->masters[port - 1])) ||
(!netif_is_bond_master(real_dev) &&
(real_dev == iboe->netdevs[port - 1])))
break;
if ((port == 0) || (port > ibdev->dev->caps.num_ports))
return 0;
else
return port;
}
static int mlx4_ib_inet_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
struct mlx4_ib_dev *ibdev;
struct in_ifaddr *ifa = ptr;
union ib_gid gid;
struct net_device *event_netdev = ifa->ifa_dev->dev;
ipv6_addr_set_v4mapped(ifa->ifa_address, (struct in6_addr *)&gid);
ibdev = container_of(this, struct mlx4_ib_dev, iboe.nb_inet);
mlx4_ib_addr_event(event, event_netdev, ibdev, &gid);
return NOTIFY_DONE;
}
#if IS_ENABLED(CONFIG_IPV6)
static int mlx4_ib_inet6_event(struct notifier_block *this, unsigned long event,
void *ptr)
{
struct mlx4_ib_dev *ibdev;
struct inet6_ifaddr *ifa = ptr;
union ib_gid *gid = (union ib_gid *)&ifa->addr;
struct net_device *event_netdev = ifa->idev->dev;
ibdev = container_of(this, struct mlx4_ib_dev, iboe.nb_inet6);
mlx4_ib_addr_event(event, event_netdev, ibdev, gid);
return NOTIFY_DONE;
}
#endif
#define MLX4_IB_INVALID_MAC ((u64)-1)
static void mlx4_ib_update_qps(struct mlx4_ib_dev *ibdev,
struct net_device *dev,
int port)
{
u64 new_smac = 0;
u64 release_mac = MLX4_IB_INVALID_MAC;
struct mlx4_ib_qp *qp;
read_lock(&dev_base_lock);
new_smac = mlx4_mac_to_u64(dev->dev_addr);
read_unlock(&dev_base_lock);
atomic64_set(&ibdev->iboe.mac[port - 1], new_smac);
/* no need for update QP1 and mac registration in non-SRIOV */
if (!mlx4_is_mfunc(ibdev->dev))
return;
mutex_lock(&ibdev->qp1_proxy_lock[port - 1]);
qp = ibdev->qp1_proxy[port - 1];
if (qp) {
int new_smac_index;
u64 old_smac;
struct mlx4_update_qp_params update_params;
mutex_lock(&qp->mutex);
old_smac = qp->pri.smac;
if (new_smac == old_smac)
goto unlock;
new_smac_index = mlx4_register_mac(ibdev->dev, port, new_smac);
if (new_smac_index < 0)
goto unlock;
update_params.smac_index = new_smac_index;
if (mlx4_update_qp(ibdev->dev, qp->mqp.qpn, MLX4_UPDATE_QP_SMAC,
&update_params)) {
release_mac = new_smac;
goto unlock;
}
/* if old port was zero, no mac was yet registered for this QP */
if (qp->pri.smac_port)
release_mac = old_smac;
qp->pri.smac = new_smac;
qp->pri.smac_port = port;
qp->pri.smac_index = new_smac_index;
}
unlock:
if (release_mac != MLX4_IB_INVALID_MAC)
mlx4_unregister_mac(ibdev->dev, port, release_mac);
if (qp)
mutex_unlock(&qp->mutex);
mutex_unlock(&ibdev->qp1_proxy_lock[port - 1]);
}
static void mlx4_ib_get_dev_addr(struct net_device *dev,
struct mlx4_ib_dev *ibdev, u8 port)
{
struct in_device *in_dev;
#if IS_ENABLED(CONFIG_IPV6)
struct inet6_dev *in6_dev;
union ib_gid *pgid;
struct inet6_ifaddr *ifp;
union ib_gid default_gid;
#endif
union ib_gid gid;
if ((port == 0) || (port > ibdev->dev->caps.num_ports))
return;
/* IPv4 gids */
in_dev = in_dev_get(dev);
if (in_dev) {
for_ifa(in_dev) {
/*ifa->ifa_address;*/
ipv6_addr_set_v4mapped(ifa->ifa_address,
(struct in6_addr *)&gid);
update_gid_table(ibdev, port, &gid, 0, 0);
}
endfor_ifa(in_dev);
in_dev_put(in_dev);
}
#if IS_ENABLED(CONFIG_IPV6)
mlx4_make_default_gid(dev, &default_gid);
/* IPv6 gids */
in6_dev = in6_dev_get(dev);
if (in6_dev) {
read_lock_bh(&in6_dev->lock);
list_for_each_entry(ifp, &in6_dev->addr_list, if_list) {
pgid = (union ib_gid *)&ifp->addr;
if (!memcmp(pgid, &default_gid, sizeof(*pgid)))
continue;
update_gid_table(ibdev, port, pgid, 0, 0);
}
read_unlock_bh(&in6_dev->lock);
in6_dev_put(in6_dev);
}
#endif
}
static void mlx4_ib_set_default_gid(struct mlx4_ib_dev *ibdev,
struct net_device *dev, u8 port)
{
union ib_gid gid;
mlx4_make_default_gid(dev, &gid);
update_gid_table(ibdev, port, &gid, 0, 1);
}
static int mlx4_ib_init_gid_table(struct mlx4_ib_dev *ibdev)
{
struct net_device *dev;
struct mlx4_ib_iboe *iboe = &ibdev->iboe;
int i;
int err = 0;
for (i = 1; i <= ibdev->num_ports; ++i) {
if (rdma_port_get_link_layer(&ibdev->ib_dev, i) ==
IB_LINK_LAYER_ETHERNET) {
err = reset_gid_table(ibdev, i);
if (err)
goto out;
}
}
read_lock(&dev_base_lock);
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_lock_bh(&iboe->lock);
for_each_netdev(&init_net, dev) {
u8 port = mlx4_ib_get_dev_port(dev, ibdev);
/* port will be non-zero only for ETH ports */
if (port) {
mlx4_ib_set_default_gid(ibdev, dev, port);
mlx4_ib_get_dev_addr(dev, ibdev, port);
}
}
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_unlock_bh(&iboe->lock);
read_unlock(&dev_base_lock);
out:
return err;
}
static void mlx4_ib_scan_netdevs(struct mlx4_ib_dev *ibdev,
struct net_device *dev,
unsigned long event)
{
struct mlx4_ib_iboe *iboe;
int update_qps_port = -1;
int port;
iboe = &ibdev->iboe;
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_lock_bh(&iboe->lock);
mlx4_foreach_ib_transport_port(port, ibdev->dev) {
enum ib_port_state port_state = IB_PORT_NOP;
struct net_device *old_master = iboe->masters[port - 1];
struct net_device *curr_netdev;
struct net_device *curr_master;
iboe->netdevs[port - 1] =
mlx4_get_protocol_dev(ibdev->dev, MLX4_PROT_ETH, port);
if (iboe->netdevs[port - 1])
mlx4_ib_set_default_gid(ibdev,
iboe->netdevs[port - 1], port);
curr_netdev = iboe->netdevs[port - 1];
if (iboe->netdevs[port - 1] &&
netif_is_bond_slave(iboe->netdevs[port - 1])) {
iboe->masters[port - 1] = netdev_master_upper_dev_get(
iboe->netdevs[port - 1]);
} else {
iboe->masters[port - 1] = NULL;
}
curr_master = iboe->masters[port - 1];
if (dev == iboe->netdevs[port - 1] &&
(event == NETDEV_CHANGEADDR || event == NETDEV_REGISTER ||
event == NETDEV_UP || event == NETDEV_CHANGE))
update_qps_port = port;
if (curr_netdev) {
port_state = (netif_running(curr_netdev) && netif_carrier_ok(curr_netdev)) ?
IB_PORT_ACTIVE : IB_PORT_DOWN;
mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
if (curr_master) {
/* if using bonding/team and a slave port is down, we
* don't want the bond IP based gids in the table since
* flows that select port by gid may get the down port.
*/
if (port_state == IB_PORT_DOWN &&
!mlx4_is_bonded(ibdev->dev)) {
reset_gid_table(ibdev, port);
mlx4_ib_set_default_gid(ibdev,
curr_netdev,
port);
} else {
/* gids from the upper dev (bond/team)
* should appear in port's gid table
*/
mlx4_ib_get_dev_addr(curr_master,
ibdev, port);
}
}
/* if bonding is used it is possible that we add it to
* masters only after IP address is assigned to the
* net bonding interface.
*/
if (curr_master && (old_master != curr_master)) {
reset_gid_table(ibdev, port);
mlx4_ib_set_default_gid(ibdev,
curr_netdev, port);
mlx4_ib_get_dev_addr(curr_master, ibdev, port);
}
if (!curr_master && (old_master != curr_master)) {
reset_gid_table(ibdev, port);
mlx4_ib_set_default_gid(ibdev,
curr_netdev, port);
mlx4_ib_get_dev_addr(curr_netdev, ibdev, port);
}
} else {
reset_gid_table(ibdev, port);
}
}
IB/mlx4: Fix lockdep splat for the iboe lock Chuck Lever reported the following stack trace: ================================= [ INFO: inconsistent lock state ] 3.16.0-rc2-00024-g2e78883 #17 Tainted: G E --------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&(&iboe->lock)->rlock){+.?...}, at: [<ffffffffa065f68b>] mlx4_ib_addr_event+0xdb/0x1a0 [mlx4_ib] {SOFTIRQ-ON-W} state was registered at: [<ffffffff810b3110>] mark_irqflags+0x110/0x170 [<ffffffff810b4806>] __lock_acquire+0x2c6/0x5b0 [<ffffffff810b4bd9>] lock_acquire+0xe9/0x120 [<ffffffff815f7f6e>] _raw_spin_lock+0x3e/0x80 [<ffffffffa0661084>] mlx4_ib_scan_netdevs+0x34/0x260 [mlx4_ib] [<ffffffffa06612db>] mlx4_ib_netdev_event+0x2b/0x40 [mlx4_ib] [<ffffffff81522219>] register_netdevice_notifier+0x99/0x1e0 [<ffffffffa06626e3>] mlx4_ib_add+0x743/0xbc0 [mlx4_ib] [<ffffffffa05ec168>] mlx4_add_device+0x48/0xa0 [mlx4_core] [<ffffffffa05ec2c3>] mlx4_register_interface+0x73/0xb0 [mlx4_core] [<ffffffffa05c505e>] cm_req_handler+0x13e/0x460 [ib_cm] [<ffffffff810002e2>] do_one_initcall+0x112/0x1c0 [<ffffffff810e8264>] do_init_module+0x34/0x190 [<ffffffff810ea62f>] load_module+0x5cf/0x740 [<ffffffff810ea939>] SyS_init_module+0x99/0xd0 [<ffffffff815f8fd2>] system_call_fastpath+0x16/0x1b irq event stamp: 336142 hardirqs last enabled at (336142): [<ffffffff810612f5>] __local_bh_enable_ip+0xb5/0xc0 hardirqs last disabled at (336141): [<ffffffff81061296>] __local_bh_enable_ip+0x56/0xc0 softirqs last enabled at (336004): [<ffffffff8106123a>] _local_bh_enable+0x4a/0x50 softirqs last disabled at (336005): [<ffffffff810617a4>] irq_exit+0x44/0xd0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&iboe->lock)->rlock); <Interrupt> lock(&(&iboe->lock)->rlock); *** DEADLOCK *** The above problem was caused by the spin lock being taken both in the process context and in a soft-irq context (in a netdev notifier handler). The required fix is to use spin_lock/unlock_bh() instead of spin_lock/unlock on the iboe lock. Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-21 05:28:41 -06:00
spin_unlock_bh(&iboe->lock);
if (update_qps_port > 0)
mlx4_ib_update_qps(ibdev, dev, update_qps_port);
}
static int mlx4_ib_netdev_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
struct mlx4_ib_dev *ibdev;
if (!net_eq(dev_net(dev), &init_net))
return NOTIFY_DONE;
ibdev = container_of(this, struct mlx4_ib_dev, iboe.nb);
mlx4_ib_scan_netdevs(ibdev, dev, event);
return NOTIFY_DONE;
}
static void init_pkeys(struct mlx4_ib_dev *ibdev)
{
int port;
int slave;
int i;
if (mlx4_is_master(ibdev->dev)) {
for (slave = 0; slave <= ibdev->dev->persist->num_vfs;
++slave) {
for (port = 1; port <= ibdev->dev->caps.num_ports; ++port) {
for (i = 0;
i < ibdev->dev->phys_caps.pkey_phys_table_len[port];
++i) {
ibdev->pkeys.virt2phys_pkey[slave][port - 1][i] =
/* master has the identity virt2phys pkey mapping */
(slave == mlx4_master_func_num(ibdev->dev) || !i) ? i :
ibdev->dev->phys_caps.pkey_phys_table_len[port] - 1;
mlx4_sync_pkey_table(ibdev->dev, slave, port, i,
ibdev->pkeys.virt2phys_pkey[slave][port - 1][i]);
}
}
}
/* initialize pkey cache */
for (port = 1; port <= ibdev->dev->caps.num_ports; ++port) {
for (i = 0;
i < ibdev->dev->phys_caps.pkey_phys_table_len[port];
++i)
ibdev->pkeys.phys_pkey_cache[port-1][i] =
(i) ? 0 : 0xFFFF;
}
}
}
static void mlx4_ib_alloc_eqs(struct mlx4_dev *dev, struct mlx4_ib_dev *ibdev)
{
char name[80];
int eq_per_port = 0;
int added_eqs = 0;
int total_eqs = 0;
int i, j, eq;
/* Legacy mode or comp_pool is not large enough */
if (dev->caps.comp_pool == 0 ||
dev->caps.num_ports > dev->caps.comp_pool)
return;
eq_per_port = dev->caps.comp_pool / dev->caps.num_ports;
/* Init eq table */
added_eqs = 0;
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
added_eqs += eq_per_port;
total_eqs = dev->caps.num_comp_vectors + added_eqs;
ibdev->eq_table = kzalloc(total_eqs * sizeof(int), GFP_KERNEL);
if (!ibdev->eq_table)
return;
ibdev->eq_added = added_eqs;
eq = 0;
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB) {
for (j = 0; j < eq_per_port; j++) {
snprintf(name, sizeof(name), "mlx4-ib-%d-%d@%s",
i, j, dev->persist->pdev->bus->name);
/* Set IRQ for specific name (per ring) */
if (mlx4_assign_eq(dev, name, NULL,
&ibdev->eq_table[eq])) {
/* Use legacy (same as mlx4_en driver) */
pr_warn("Can't allocate EQ %d; reverting to legacy\n", eq);
ibdev->eq_table[eq] =
(eq % dev->caps.num_comp_vectors);
}
eq++;
}
}
/* Fill the reset of the vector with legacy EQ */
for (i = 0, eq = added_eqs; i < dev->caps.num_comp_vectors; i++)
ibdev->eq_table[eq++] = i;
/* Advertise the new number of EQs to clients */
ibdev->ib_dev.num_comp_vectors = total_eqs;
}
static void mlx4_ib_free_eqs(struct mlx4_dev *dev, struct mlx4_ib_dev *ibdev)
{
int i;
/* no additional eqs were added */
if (!ibdev->eq_table)
return;
/* Reset the advertised EQ number */
ibdev->ib_dev.num_comp_vectors = dev->caps.num_comp_vectors;
/* Free only the added eqs */
for (i = 0; i < ibdev->eq_added; i++) {
/* Don't free legacy eqs if used */
if (ibdev->eq_table[i] <= dev->caps.num_comp_vectors)
continue;
mlx4_release_eq(dev, ibdev->eq_table[i]);
}
kfree(ibdev->eq_table);
}
static void *mlx4_ib_add(struct mlx4_dev *dev)
{
struct mlx4_ib_dev *ibdev;
int num_ports = 0;
int i, j;
int err;
struct mlx4_ib_iboe *iboe;
int ib_num_ports = 0;
int num_req_counters;
pr_info_once("%s", mlx4_ib_version);
num_ports = 0;
mlx4_foreach_ib_transport_port(i, dev)
num_ports++;
/* No point in registering a device with no ports... */
if (num_ports == 0)
return NULL;
ibdev = (struct mlx4_ib_dev *) ib_alloc_device(sizeof *ibdev);
if (!ibdev) {
dev_err(&dev->persist->pdev->dev,
"Device struct alloc failed\n");
return NULL;
}
iboe = &ibdev->iboe;
if (mlx4_pd_alloc(dev, &ibdev->priv_pdn))
goto err_dealloc;
if (mlx4_uar_alloc(dev, &ibdev->priv_uar))
goto err_pd;
ibdev->uar_map = ioremap((phys_addr_t) ibdev->priv_uar.pfn << PAGE_SHIFT,
PAGE_SIZE);
if (!ibdev->uar_map)
goto err_uar;
MLX4_INIT_DOORBELL_LOCK(&ibdev->uar_lock);
ibdev->dev = dev;
ibdev->bond_next_port = 0;
strlcpy(ibdev->ib_dev.name, "mlx4_%d", IB_DEVICE_NAME_MAX);
ibdev->ib_dev.owner = THIS_MODULE;
ibdev->ib_dev.node_type = RDMA_NODE_IB_CA;
ibdev->ib_dev.local_dma_lkey = dev->caps.reserved_lkey;
ibdev->num_ports = num_ports;
ibdev->ib_dev.phys_port_cnt = mlx4_is_bonded(dev) ?
1 : ibdev->num_ports;
ibdev->ib_dev.num_comp_vectors = dev->caps.num_comp_vectors;
ibdev->ib_dev.dma_device = &dev->persist->pdev->dev;
mlx4: 64-byte CQE/EQE support ConnectX-3 devices can use either 64- or 32-byte completion queue entries (CQEs) and event queue entries (EQEs). Using 64-byte EQEs/CQEs performs better because each entry is aligned to a complete cacheline. This patch queries the HCA's capabilities, and if it supports 64-byte CQEs and EQES the driver will configure the HW to work in 64-byte mode. The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ. Since this mode is global, userspace (libmlx4) must be updated to work with the configured CQE size, and guests using SR-IOV virtual functions need to know both EQE and CQE size. In case one of the 64-byte CQE/EQE capabilities is activated, the patch makes sure that older guest drivers that use the QUERY_DEV_FUNC command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that they need an update to be able to work with the PPF. This is done by changing the returned pf_context_behaviour not to be zero any more. In case none of these capabilities is activated that value remains zero and older guest drivers can run OK. The SRIOV related flow is as follows 1. the PPF does the detection of the new capabilities using QUERY_DEV_CAP command. 2. the PPF activates the new capabilities using INIT_HCA. 3. the VF detects if the PPF activated the capabilities using QUERY_HCA, and if this is the case activates them for itself too. Note that the VF detects that it must be aware to the new PF behaviour using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode. User space notification is done through a new field introduced in struct mlx4_ib_ucontext which holds device capabilities for which user space must take action. This changes the binary interface so the ABI towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only when **needed** i.e. only when the driver does use 64-byte CQEs or future device capabilities which must be in sync by user space. This practice allows to work with unmodified libmlx4 on older devices (e.g A0, B0) which don't support 64-byte CQEs. In order to keep existing systems functional when they update to a newer kernel that contains these changes in VF and userspace ABI, a module parameter enable_64b_cqe_eqe must be set to enable 64-byte mode; the default is currently false. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-10-21 08:59:24 -06:00
if (dev->caps.userspace_caps)
ibdev->ib_dev.uverbs_abi_ver = MLX4_IB_UVERBS_ABI_VERSION;
else
ibdev->ib_dev.uverbs_abi_ver = MLX4_IB_UVERBS_NO_DEV_CAPS_ABI_VERSION;
ibdev->ib_dev.uverbs_cmd_mask =
(1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
(1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
(1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
(1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_REG_MR) |
(1ull << IB_USER_VERBS_CMD_REREG_MR) |
(1ull << IB_USER_VERBS_CMD_DEREG_MR) |
(1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
(1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
(1ull << IB_USER_VERBS_CMD_RESIZE_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_QP) |
(1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
(1ull << IB_USER_VERBS_CMD_QUERY_QP) |
(1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
(1ull << IB_USER_VERBS_CMD_ATTACH_MCAST) |
(1ull << IB_USER_VERBS_CMD_DETACH_MCAST) |
(1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
(1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
(1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_XSRQ) |
(1ull << IB_USER_VERBS_CMD_OPEN_QP);
ibdev->ib_dev.query_device = mlx4_ib_query_device;
ibdev->ib_dev.query_port = mlx4_ib_query_port;
ibdev->ib_dev.get_link_layer = mlx4_ib_port_link_layer;
ibdev->ib_dev.query_gid = mlx4_ib_query_gid;
ibdev->ib_dev.query_pkey = mlx4_ib_query_pkey;
ibdev->ib_dev.modify_device = mlx4_ib_modify_device;
ibdev->ib_dev.modify_port = mlx4_ib_modify_port;
ibdev->ib_dev.alloc_ucontext = mlx4_ib_alloc_ucontext;
ibdev->ib_dev.dealloc_ucontext = mlx4_ib_dealloc_ucontext;
ibdev->ib_dev.mmap = mlx4_ib_mmap;
ibdev->ib_dev.alloc_pd = mlx4_ib_alloc_pd;
ibdev->ib_dev.dealloc_pd = mlx4_ib_dealloc_pd;
ibdev->ib_dev.create_ah = mlx4_ib_create_ah;
ibdev->ib_dev.query_ah = mlx4_ib_query_ah;
ibdev->ib_dev.destroy_ah = mlx4_ib_destroy_ah;
ibdev->ib_dev.create_srq = mlx4_ib_create_srq;
ibdev->ib_dev.modify_srq = mlx4_ib_modify_srq;
ibdev->ib_dev.query_srq = mlx4_ib_query_srq;
ibdev->ib_dev.destroy_srq = mlx4_ib_destroy_srq;
ibdev->ib_dev.post_srq_recv = mlx4_ib_post_srq_recv;
ibdev->ib_dev.create_qp = mlx4_ib_create_qp;
ibdev->ib_dev.modify_qp = mlx4_ib_modify_qp;
ibdev->ib_dev.query_qp = mlx4_ib_query_qp;
ibdev->ib_dev.destroy_qp = mlx4_ib_destroy_qp;
ibdev->ib_dev.post_send = mlx4_ib_post_send;
ibdev->ib_dev.post_recv = mlx4_ib_post_recv;
ibdev->ib_dev.create_cq = mlx4_ib_create_cq;
ibdev->ib_dev.modify_cq = mlx4_ib_modify_cq;
ibdev->ib_dev.resize_cq = mlx4_ib_resize_cq;
ibdev->ib_dev.destroy_cq = mlx4_ib_destroy_cq;
ibdev->ib_dev.poll_cq = mlx4_ib_poll_cq;
ibdev->ib_dev.req_notify_cq = mlx4_ib_arm_cq;
ibdev->ib_dev.get_dma_mr = mlx4_ib_get_dma_mr;
ibdev->ib_dev.reg_user_mr = mlx4_ib_reg_user_mr;
ibdev->ib_dev.rereg_user_mr = mlx4_ib_rereg_user_mr;
ibdev->ib_dev.dereg_mr = mlx4_ib_dereg_mr;
ibdev->ib_dev.alloc_fast_reg_mr = mlx4_ib_alloc_fast_reg_mr;
ibdev->ib_dev.alloc_fast_reg_page_list = mlx4_ib_alloc_fast_reg_page_list;
ibdev->ib_dev.free_fast_reg_page_list = mlx4_ib_free_fast_reg_page_list;
ibdev->ib_dev.attach_mcast = mlx4_ib_mcg_attach;
ibdev->ib_dev.detach_mcast = mlx4_ib_mcg_detach;
ibdev->ib_dev.process_mad = mlx4_ib_process_mad;
if (!mlx4_is_slave(ibdev->dev)) {
ibdev->ib_dev.alloc_fmr = mlx4_ib_fmr_alloc;
ibdev->ib_dev.map_phys_fmr = mlx4_ib_map_phys_fmr;
ibdev->ib_dev.unmap_fmr = mlx4_ib_unmap_fmr;
ibdev->ib_dev.dealloc_fmr = mlx4_ib_fmr_dealloc;
}
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_MEM_WINDOW ||
dev->caps.bmme_flags & MLX4_BMME_FLAG_TYPE_2_WIN) {
ibdev->ib_dev.alloc_mw = mlx4_ib_alloc_mw;
ibdev->ib_dev.bind_mw = mlx4_ib_bind_mw;
ibdev->ib_dev.dealloc_mw = mlx4_ib_dealloc_mw;
ibdev->ib_dev.uverbs_cmd_mask |=
(1ull << IB_USER_VERBS_CMD_ALLOC_MW) |
(1ull << IB_USER_VERBS_CMD_DEALLOC_MW);
}
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_XRC) {
ibdev->ib_dev.alloc_xrcd = mlx4_ib_alloc_xrcd;
ibdev->ib_dev.dealloc_xrcd = mlx4_ib_dealloc_xrcd;
ibdev->ib_dev.uverbs_cmd_mask |=
(1ull << IB_USER_VERBS_CMD_OPEN_XRCD) |
(1ull << IB_USER_VERBS_CMD_CLOSE_XRCD);
}
if (check_flow_steering_support(dev)) {
ibdev->steering_support = MLX4_STEERING_MODE_DEVICE_MANAGED;
ibdev->ib_dev.create_flow = mlx4_ib_create_flow;
ibdev->ib_dev.destroy_flow = mlx4_ib_destroy_flow;
IB/core: extended command: an improved infrastructure for uverbs commands Commit 400dbc96583f ("IB/core: Infrastructure for extensible uverbs commands") added an infrastructure for extensible uverbs commands while later commit 436f2ad05a0b ("IB/core: Export ib_create/destroy_flow through uverbs") exported ib_create_flow()/ib_destroy_flow() functions using this new infrastructure. According to the commit 400dbc96583f, the purpose of this infrastructure is to support passing around provider (eg. hardware) specific buffers when userspace issue commands to the kernel, so that it would be possible to extend uverbs (eg. core) buffers independently from the provider buffers. But the new kernel command function prototypes were not modified to take advantage of this extension. This issue was exposed by Roland Dreier in a previous review[1]. So the following patch is an attempt to a revised extensible command infrastructure. This improved extensible command infrastructure distinguish between core (eg. legacy)'s command/response buffers from provider (eg. hardware)'s command/response buffers: each extended command implementing function is given a struct ib_udata to hold core (eg. uverbs) input and output buffers, and another struct ib_udata to hold the hw (eg. provider) input and output buffers. Having those buffers identified separately make it easier to increase one buffer to support extension without having to add some code to guess the exact size of each command/response parts: This should make the extended functions more reliable. Additionally, instead of relying on command identifier being greater than IB_USER_VERBS_CMD_THRESHOLD, the proposed infrastructure rely on unused bits in command field: on the 32 bits provided by command field, only 6 bits are really needed to encode the identifier of commands currently supported by the kernel. (Even using only 6 bits leaves room for about 23 new commands). So this patch makes use of some high order bits in command field to store flags, leaving enough room for more command identifiers than one will ever need (eg. 256). The new flags are used to specify if the command should be processed as an extended one or a legacy one. While designing the new command format, care was taken to make usage of flags itself extensible. Using high order bits of the commands field ensure that newer libibverbs on older kernel will properly fail when trying to call extended commands. On the other hand, older libibverbs on newer kernel will never be able to issue calls to extended commands. The extended command header includes the optional response pointer so that output buffer length and output buffer pointer are located together in the command, allowing proper parameters checking. This should make implementing functions easier and safer. Additionally the extended header ensure 64bits alignment, while making all sizes multiple of 8 bytes, extending the maximum buffer size: legacy extended Maximum command buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) Maximum response buffer: 256KBytes 1024KBytes (512KBytes + 512KBytes) For the purpose of doing proper buffer size accounting, the headers size are no more taken in account in "in_words". One of the odds of the current extensible infrastructure, reading twice the "legacy" command header, is fixed by removing the "legacy" command header from the extended command header: they are processed as two different parts of the command: memory is read once and information are not duplicated: it's making clear that's an extended command scheme and not a different command scheme. The proposed scheme will format input (command) and output (response) buffers this way: - command: legacy header + extended header + command data (core + hw): +----------------------------------------+ | flags | 00 00 | command | | in_words | out_words | +----------------------------------------+ | response | | response | | provider_in_words | provider_out_words | | padding | +----------------------------------------+ | | . <uverbs input> . . (in_words * 8) . | | +----------------------------------------+ | | . <provider input> . . (provider_in_words * 8) . | | +----------------------------------------+ - response, if present: +----------------------------------------+ | | . <uverbs output space> . . (out_words * 8) . | | +----------------------------------------+ | | . <provider output space> . . (provider_out_words * 8) . | | +----------------------------------------+ The overall design is to ensure that the extensible infrastructure is itself extensible while begin more reliable with more input and bound checking. Note: The unused field in the extended header would be perfect candidate to hold the command "comp_mask" (eg. bit field used to handle compatibility). This was suggested by Roland Dreier in a previous review[2]. But "comp_mask" field is likely to be present in the uverb input and/or provider input, likewise for the response, as noted by Matan Barak[3], so it doesn't make sense to put "comp_mask" in the header. [1]: http://marc.info/?i=CAL1RGDWxmM17W2o_era24A-TTDeKyoL6u3NRu_=t_dhV_ZA9MA@mail.gmail.com [2]: http://marc.info/?i=CAL1RGDXJtrc849M6_XNZT5xO1+ybKtLWGq6yg6LhoSsKpsmkYA@mail.gmail.com [3]: http://marc.info/?i=525C1149.6000701@mellanox.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://marc.info/?i=cover.1383773832.git.ydroneaud@opteya.com [ Convert "ret ? ret : 0" to the equivalent "ret". - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-06 15:21:49 -07:00
ibdev->ib_dev.uverbs_ex_cmd_mask |=
(1ull << IB_USER_VERBS_EX_CMD_CREATE_FLOW) |
(1ull << IB_USER_VERBS_EX_CMD_DESTROY_FLOW);
}
mlx4_ib_alloc_eqs(dev, ibdev);
spin_lock_init(&iboe->lock);
if (init_node_data(ibdev))
goto err_map;
num_req_counters = mlx4_is_bonded(dev) ? 1 : ibdev->num_ports;
for (i = 0; i < num_req_counters; ++i) {
mutex_init(&ibdev->qp1_proxy_lock[i]);
if (mlx4_ib_port_link_layer(&ibdev->ib_dev, i + 1) ==
IB_LINK_LAYER_ETHERNET) {
err = mlx4_counter_alloc(ibdev->dev, &ibdev->counters[i]);
if (err)
ibdev->counters[i] = -1;
} else {
ibdev->counters[i] = -1;
}
}
if (mlx4_is_bonded(dev))
for (i = 1; i < ibdev->num_ports ; ++i)
ibdev->counters[i] = ibdev->counters[0];
mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
ib_num_ports++;
spin_lock_init(&ibdev->sm_lock);
mutex_init(&ibdev->cap_mask_mutex);
INIT_LIST_HEAD(&ibdev->qp_list);
spin_lock_init(&ibdev->reset_flow_resource_lock);
if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED &&
ib_num_ports) {
ibdev->steer_qpn_count = MLX4_IB_UC_MAX_NUM_QPS;
err = mlx4_qp_reserve_range(dev, ibdev->steer_qpn_count,
MLX4_IB_UC_STEER_QPN_ALIGN,
net/mlx4: Change QP allocation scheme When using BF (Blue-Flame), the QPN overrides the VLAN, CV, and SV fields in the WQE. Thus, BF may only be used for QPNs with bits 6,7 unset. The current Ethernet driver code reserves a Tx QP range with 256b alignment. This is wrong because if there are more than 64 Tx QPs in use, QPNs >= base + 65 will have bits 6/7 set. This problem is not specific for the Ethernet driver, any entity that tries to reserve more than 64 BF-enabled QPs should fail. Also, using ranges is not necessary here and is wasteful. The new mechanism introduced here will support reservation for "Eth QPs eligible for BF" for all drivers: bare-metal, multi-PF, and VFs (when hypervisors support WC in VMs). The flow we use is: 1. In mlx4_en, allocate Tx QPs one by one instead of a range allocation, and request "BF enabled QPs" if BF is supported for the function 2. In the ALLOC_RES FW command, change param1 to: a. param1[23:0] - number of QPs b. param1[31-24] - flags controlling QPs reservation Bit 31 refers to Eth blueflame supported QPs. Those QPs must have bits 6 and 7 unset in order to be used in Ethernet. Bits 24-30 of the flags are currently reserved. When a function tries to allocate a QP, it states the required attributes for this QP. Those attributes are considered "best-effort". If an attribute, such as Ethernet BF enabled QP, is a must-have attribute, the function has to check that attribute is supported before trying to do the allocation. In a lower layer of the code, mlx4_qp_reserve_range masks out the bits which are unsupported. If SRIOV is used, the PF validates those attributes and masks out unsupported attributes as well. In order to notify VFs which attributes are supported, the VF uses QUERY_FUNC_CAP command. This command's mailbox is filled by the PF, which notifies which QP allocation attributes it supports. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-11 01:57:54 -07:00
&ibdev->steer_qpn_base, 0);
if (err)
goto err_counter;
ibdev->ib_uc_qpns_bitmap =
kmalloc(BITS_TO_LONGS(ibdev->steer_qpn_count) *
sizeof(long),
GFP_KERNEL);
if (!ibdev->ib_uc_qpns_bitmap) {
dev_err(&dev->persist->pdev->dev,
"bit map alloc failed\n");
goto err_steer_qp_release;
}
bitmap_zero(ibdev->ib_uc_qpns_bitmap, ibdev->steer_qpn_count);
err = mlx4_FLOW_STEERING_IB_UC_QP_RANGE(
dev, ibdev->steer_qpn_base,
ibdev->steer_qpn_base +
ibdev->steer_qpn_count - 1);
if (err)
goto err_steer_free_bitmap;
}
for (j = 1; j <= ibdev->dev->caps.num_ports; j++)
atomic64_set(&iboe->mac[j - 1], ibdev->dev->caps.def_mac[j]);
if (ib_register_device(&ibdev->ib_dev, NULL))
goto err_steer_free_bitmap;
if (mlx4_ib_mad_init(ibdev))
goto err_reg;
if (mlx4_ib_init_sriov(ibdev))
goto err_mad;
if (dev->caps.flags & MLX4_DEV_CAP_FLAG_IBOE) {
if (!iboe->nb.notifier_call) {
iboe->nb.notifier_call = mlx4_ib_netdev_event;
err = register_netdevice_notifier(&iboe->nb);
if (err) {
iboe->nb.notifier_call = NULL;
goto err_notif;
}
}
if (!iboe->nb_inet.notifier_call) {
iboe->nb_inet.notifier_call = mlx4_ib_inet_event;
err = register_inetaddr_notifier(&iboe->nb_inet);
if (err) {
iboe->nb_inet.notifier_call = NULL;
goto err_notif;
}
}
#if IS_ENABLED(CONFIG_IPV6)
if (!iboe->nb_inet6.notifier_call) {
iboe->nb_inet6.notifier_call = mlx4_ib_inet6_event;
err = register_inet6addr_notifier(&iboe->nb_inet6);
if (err) {
iboe->nb_inet6.notifier_call = NULL;
goto err_notif;
}
}
#endif
if (mlx4_ib_init_gid_table(ibdev))
goto err_notif;
}
for (j = 0; j < ARRAY_SIZE(mlx4_class_attributes); ++j) {
if (device_create_file(&ibdev->ib_dev.dev,
mlx4_class_attributes[j]))
goto err_notif;
}
ibdev->ib_active = true;
if (mlx4_is_mfunc(ibdev->dev))
init_pkeys(ibdev);
/* create paravirt contexts for any VFs which are active */
if (mlx4_is_master(ibdev->dev)) {
for (j = 0; j < MLX4_MFUNC_MAX; j++) {
if (j == mlx4_master_func_num(ibdev->dev))
continue;
if (mlx4_is_slave_active(ibdev->dev, j))
do_slave_init(ibdev, j, 1);
}
}
return ibdev;
err_notif:
if (ibdev->iboe.nb.notifier_call) {
if (unregister_netdevice_notifier(&ibdev->iboe.nb))
pr_warn("failure unregistering notifier\n");
ibdev->iboe.nb.notifier_call = NULL;
}
if (ibdev->iboe.nb_inet.notifier_call) {
if (unregister_inetaddr_notifier(&ibdev->iboe.nb_inet))
pr_warn("failure unregistering notifier\n");
ibdev->iboe.nb_inet.notifier_call = NULL;
}
#if IS_ENABLED(CONFIG_IPV6)
if (ibdev->iboe.nb_inet6.notifier_call) {
if (unregister_inet6addr_notifier(&ibdev->iboe.nb_inet6))
pr_warn("failure unregistering notifier\n");
ibdev->iboe.nb_inet6.notifier_call = NULL;
}
#endif
flush_workqueue(wq);
mlx4_ib_close_sriov(ibdev);
err_mad:
mlx4_ib_mad_cleanup(ibdev);
err_reg:
ib_unregister_device(&ibdev->ib_dev);
err_steer_free_bitmap:
kfree(ibdev->ib_uc_qpns_bitmap);
err_steer_qp_release:
if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
ibdev->steer_qpn_count);
err_counter:
for (; i; --i)
if (ibdev->counters[i - 1] != -1)
mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]);
err_map:
iounmap(ibdev->uar_map);
err_uar:
mlx4_uar_free(dev, &ibdev->priv_uar);
err_pd:
mlx4_pd_free(dev, ibdev->priv_pdn);
err_dealloc:
ib_dealloc_device(&ibdev->ib_dev);
return NULL;
}
int mlx4_ib_steer_qp_alloc(struct mlx4_ib_dev *dev, int count, int *qpn)
{
int offset;
WARN_ON(!dev->ib_uc_qpns_bitmap);
offset = bitmap_find_free_region(dev->ib_uc_qpns_bitmap,
dev->steer_qpn_count,
get_count_order(count));
if (offset < 0)
return offset;
*qpn = dev->steer_qpn_base + offset;
return 0;
}
void mlx4_ib_steer_qp_free(struct mlx4_ib_dev *dev, u32 qpn, int count)
{
if (!qpn ||
dev->steering_support != MLX4_STEERING_MODE_DEVICE_MANAGED)
return;
BUG_ON(qpn < dev->steer_qpn_base);
bitmap_release_region(dev->ib_uc_qpns_bitmap,
qpn - dev->steer_qpn_base,
get_count_order(count));
}
int mlx4_ib_steer_qp_reg(struct mlx4_ib_dev *mdev, struct mlx4_ib_qp *mqp,
int is_attach)
{
int err;
size_t flow_size;
struct ib_flow_attr *flow = NULL;
struct ib_flow_spec_ib *ib_spec;
if (is_attach) {
flow_size = sizeof(struct ib_flow_attr) +
sizeof(struct ib_flow_spec_ib);
flow = kzalloc(flow_size, GFP_KERNEL);
if (!flow)
return -ENOMEM;
flow->port = mqp->port;
flow->num_of_specs = 1;
flow->size = flow_size;
ib_spec = (struct ib_flow_spec_ib *)(flow + 1);
ib_spec->type = IB_FLOW_SPEC_IB;
ib_spec->size = sizeof(struct ib_flow_spec_ib);
/* Add an empty rule for IB L2 */
memset(&ib_spec->mask, 0, sizeof(ib_spec->mask));
err = __mlx4_ib_create_flow(&mqp->ibqp, flow,
IB_FLOW_DOMAIN_NIC,
MLX4_FS_REGULAR,
&mqp->reg_id);
} else {
err = __mlx4_ib_destroy_flow(mdev->dev, mqp->reg_id);
}
kfree(flow);
return err;
}
static void mlx4_ib_remove(struct mlx4_dev *dev, void *ibdev_ptr)
{
struct mlx4_ib_dev *ibdev = ibdev_ptr;
int p;
ibdev->ib_active = false;
flush_workqueue(wq);
mlx4_ib_close_sriov(ibdev);
mlx4_ib_mad_cleanup(ibdev);
ib_unregister_device(&ibdev->ib_dev);
if (ibdev->iboe.nb.notifier_call) {
if (unregister_netdevice_notifier(&ibdev->iboe.nb))
pr_warn("failure unregistering notifier\n");
ibdev->iboe.nb.notifier_call = NULL;
}
if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) {
mlx4_qp_release_range(dev, ibdev->steer_qpn_base,
ibdev->steer_qpn_count);
kfree(ibdev->ib_uc_qpns_bitmap);
}
if (ibdev->iboe.nb_inet.notifier_call) {
if (unregister_inetaddr_notifier(&ibdev->iboe.nb_inet))
pr_warn("failure unregistering notifier\n");
ibdev->iboe.nb_inet.notifier_call = NULL;
}
#if IS_ENABLED(CONFIG_IPV6)
if (ibdev->iboe.nb_inet6.notifier_call) {
if (unregister_inet6addr_notifier(&ibdev->iboe.nb_inet6))
pr_warn("failure unregistering notifier\n");
ibdev->iboe.nb_inet6.notifier_call = NULL;
}
#endif
iounmap(ibdev->uar_map);
for (p = 0; p < ibdev->num_ports; ++p)
if (ibdev->counters[p] != -1)
mlx4_counter_free(ibdev->dev, ibdev->counters[p]);
mlx4_foreach_port(p, dev, MLX4_PORT_TYPE_IB)
mlx4_CLOSE_PORT(dev, p);
mlx4_ib_free_eqs(dev, ibdev);
mlx4_uar_free(dev, &ibdev->priv_uar);
mlx4_pd_free(dev, ibdev->priv_pdn);
ib_dealloc_device(&ibdev->ib_dev);
}
static void do_slave_init(struct mlx4_ib_dev *ibdev, int slave, int do_init)
{
struct mlx4_ib_demux_work **dm = NULL;
struct mlx4_dev *dev = ibdev->dev;
int i;
unsigned long flags;
struct mlx4_active_ports actv_ports;
unsigned int ports;
unsigned int first_port;
if (!mlx4_is_master(dev))
return;
actv_ports = mlx4_get_active_ports(dev, slave);
ports = bitmap_weight(actv_ports.ports, dev->caps.num_ports);
first_port = find_first_bit(actv_ports.ports, dev->caps.num_ports);
dm = kcalloc(ports, sizeof(*dm), GFP_ATOMIC);
if (!dm) {
pr_err("failed to allocate memory for tunneling qp update\n");
goto out;
}
for (i = 0; i < ports; i++) {
dm[i] = kmalloc(sizeof (struct mlx4_ib_demux_work), GFP_ATOMIC);
if (!dm[i]) {
pr_err("failed to allocate memory for tunneling qp update work struct\n");
for (i = 0; i < dev->caps.num_ports; i++) {
if (dm[i])
kfree(dm[i]);
}
goto out;
}
}
/* initialize or tear down tunnel QPs for the slave */
for (i = 0; i < ports; i++) {
INIT_WORK(&dm[i]->work, mlx4_ib_tunnels_update_work);
dm[i]->port = first_port + i + 1;
dm[i]->slave = slave;
dm[i]->do_init = do_init;
dm[i]->dev = ibdev;
spin_lock_irqsave(&ibdev->sriov.going_down_lock, flags);
if (!ibdev->sriov.is_going_down)
queue_work(ibdev->sriov.demux[i].ud_wq, &dm[i]->work);
spin_unlock_irqrestore(&ibdev->sriov.going_down_lock, flags);
}
out:
kfree(dm);
return;
}
static void mlx4_ib_handle_catas_error(struct mlx4_ib_dev *ibdev)
{
struct mlx4_ib_qp *mqp;
unsigned long flags_qp;
unsigned long flags_cq;
struct mlx4_ib_cq *send_mcq, *recv_mcq;
struct list_head cq_notify_list;
struct mlx4_cq *mcq;
unsigned long flags;
pr_warn("mlx4_ib_handle_catas_error was started\n");
INIT_LIST_HEAD(&cq_notify_list);
/* Go over qp list reside on that ibdev, sync with create/destroy qp.*/
spin_lock_irqsave(&ibdev->reset_flow_resource_lock, flags);
list_for_each_entry(mqp, &ibdev->qp_list, qps_list) {
spin_lock_irqsave(&mqp->sq.lock, flags_qp);
if (mqp->sq.tail != mqp->sq.head) {
send_mcq = to_mcq(mqp->ibqp.send_cq);
spin_lock_irqsave(&send_mcq->lock, flags_cq);
if (send_mcq->mcq.comp &&
mqp->ibqp.send_cq->comp_handler) {
if (!send_mcq->mcq.reset_notify_added) {
send_mcq->mcq.reset_notify_added = 1;
list_add_tail(&send_mcq->mcq.reset_notify,
&cq_notify_list);
}
}
spin_unlock_irqrestore(&send_mcq->lock, flags_cq);
}
spin_unlock_irqrestore(&mqp->sq.lock, flags_qp);
/* Now, handle the QP's receive queue */
spin_lock_irqsave(&mqp->rq.lock, flags_qp);
/* no handling is needed for SRQ */
if (!mqp->ibqp.srq) {
if (mqp->rq.tail != mqp->rq.head) {
recv_mcq = to_mcq(mqp->ibqp.recv_cq);
spin_lock_irqsave(&recv_mcq->lock, flags_cq);
if (recv_mcq->mcq.comp &&
mqp->ibqp.recv_cq->comp_handler) {
if (!recv_mcq->mcq.reset_notify_added) {
recv_mcq->mcq.reset_notify_added = 1;
list_add_tail(&recv_mcq->mcq.reset_notify,
&cq_notify_list);
}
}
spin_unlock_irqrestore(&recv_mcq->lock,
flags_cq);
}
}
spin_unlock_irqrestore(&mqp->rq.lock, flags_qp);
}
list_for_each_entry(mcq, &cq_notify_list, reset_notify) {
mcq->comp(mcq);
}
spin_unlock_irqrestore(&ibdev->reset_flow_resource_lock, flags);
pr_warn("mlx4_ib_handle_catas_error ended\n");
}
static void handle_bonded_port_state_event(struct work_struct *work)
{
struct ib_event_work *ew =
container_of(work, struct ib_event_work, work);
struct mlx4_ib_dev *ibdev = ew->ib_dev;
enum ib_port_state bonded_port_state = IB_PORT_NOP;
int i;
struct ib_event ibev;
kfree(ew);
spin_lock_bh(&ibdev->iboe.lock);
for (i = 0; i < MLX4_MAX_PORTS; ++i) {
struct net_device *curr_netdev = ibdev->iboe.netdevs[i];
enum ib_port_state curr_port_state =
(netif_running(curr_netdev) &&
netif_carrier_ok(curr_netdev)) ?
IB_PORT_ACTIVE : IB_PORT_DOWN;
bonded_port_state = (bonded_port_state != IB_PORT_ACTIVE) ?
curr_port_state : IB_PORT_ACTIVE;
}
spin_unlock_bh(&ibdev->iboe.lock);
ibev.device = &ibdev->ib_dev;
ibev.element.port_num = 1;
ibev.event = (bonded_port_state == IB_PORT_ACTIVE) ?
IB_EVENT_PORT_ACTIVE : IB_EVENT_PORT_ERR;
ib_dispatch_event(&ibev);
}
static void mlx4_ib_event(struct mlx4_dev *dev, void *ibdev_ptr,
mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 02:21:40 -06:00
enum mlx4_dev_event event, unsigned long param)
{
struct ib_event ibev;
struct mlx4_ib_dev *ibdev = to_mdev((struct ib_device *) ibdev_ptr);
mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 02:21:40 -06:00
struct mlx4_eqe *eqe = NULL;
struct ib_event_work *ew;
int p = 0;
mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 02:21:40 -06:00
if (mlx4_is_bonded(dev) &&
((event == MLX4_DEV_EVENT_PORT_UP) ||
(event == MLX4_DEV_EVENT_PORT_DOWN))) {
ew = kmalloc(sizeof(*ew), GFP_ATOMIC);
if (!ew)
return;
INIT_WORK(&ew->work, handle_bonded_port_state_event);
ew->ib_dev = ibdev;
queue_work(wq, &ew->work);
return;
}
mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 02:21:40 -06:00
if (event == MLX4_DEV_EVENT_PORT_MGMT_CHANGE)
eqe = (struct mlx4_eqe *)param;
else
p = (int) param;
switch (event) {
case MLX4_DEV_EVENT_PORT_UP:
if (p > ibdev->num_ports)
return;
if (mlx4_is_master(dev) &&
rdma_port_get_link_layer(&ibdev->ib_dev, p) ==
IB_LINK_LAYER_INFINIBAND) {
mlx4_ib_invalidate_all_guid_record(ibdev, p);
}
ibev.event = IB_EVENT_PORT_ACTIVE;
break;
case MLX4_DEV_EVENT_PORT_DOWN:
if (p > ibdev->num_ports)
return;
ibev.event = IB_EVENT_PORT_ERR;
break;
case MLX4_DEV_EVENT_CATASTROPHIC_ERROR:
ibdev->ib_active = false;
ibev.event = IB_EVENT_DEVICE_FATAL;
mlx4_ib_handle_catas_error(ibdev);
break;
mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 02:21:40 -06:00
case MLX4_DEV_EVENT_PORT_MGMT_CHANGE:
ew = kmalloc(sizeof *ew, GFP_ATOMIC);
if (!ew) {
pr_err("failed to allocate memory for events work\n");
break;
}
INIT_WORK(&ew->work, handle_port_mgmt_change_event);
memcpy(&ew->ib_eqe, eqe, sizeof *eqe);
ew->ib_dev = ibdev;
/* need to queue only for port owner, which uses GEN_EQE */
if (mlx4_is_master(dev))
queue_work(wq, &ew->work);
else
handle_port_mgmt_change_event(&ew->work);
mlx4: Use port management change event instead of smp_snoop The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 02:21:40 -06:00
return;
case MLX4_DEV_EVENT_SLAVE_INIT:
/* here, p is the slave id */
do_slave_init(ibdev, p, 1);
return;
case MLX4_DEV_EVENT_SLAVE_SHUTDOWN:
/* here, p is the slave id */
do_slave_init(ibdev, p, 0);
return;
default:
return;
}
ibev.device = ibdev_ptr;
ibev.element.port_num = mlx4_is_bonded(ibdev->dev) ? 1 : (u8)p;
ib_dispatch_event(&ibev);
}
static struct mlx4_interface mlx4_ib_interface = {
.add = mlx4_ib_add,
.remove = mlx4_ib_remove,
.event = mlx4_ib_event,
.protocol = MLX4_PROT_IB_IPV6,
.flags = MLX4_INTFF_BONDING
};
static int __init mlx4_ib_init(void)
{
int err;
wq = create_singlethread_workqueue("mlx4_ib");
if (!wq)
return -ENOMEM;
err = mlx4_ib_mcg_init();
if (err)
goto clean_wq;
err = mlx4_register_interface(&mlx4_ib_interface);
if (err)
goto clean_mcg;
return 0;
clean_mcg:
mlx4_ib_mcg_destroy();
clean_wq:
destroy_workqueue(wq);
return err;
}
static void __exit mlx4_ib_cleanup(void)
{
mlx4_unregister_interface(&mlx4_ib_interface);
mlx4_ib_mcg_destroy();
destroy_workqueue(wq);
}
module_init(mlx4_ib_init);
module_exit(mlx4_ib_cleanup);