2012-10-14 13:07:16 -06:00
|
|
|
/*
|
|
|
|
* drivers/net/phy/at803x.c
|
|
|
|
*
|
|
|
|
* Driver for Atheros 803x PHY
|
|
|
|
*
|
|
|
|
* Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
* option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/phy.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
|
|
|
|
#define AT803X_INTR_ENABLE 0x12
|
|
|
|
#define AT803X_INTR_STATUS 0x13
|
|
|
|
#define AT803X_WOL_ENABLE 0x01
|
|
|
|
#define AT803X_DEVICE_ADDR 0x03
|
|
|
|
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
|
|
|
|
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
|
|
|
|
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
|
|
|
|
#define AT803X_MMD_ACCESS_CONTROL 0x0D
|
|
|
|
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
|
|
|
|
#define AT803X_FUNC_DATA 0x4003
|
2014-03-28 01:39:41 -06:00
|
|
|
#define AT803X_INER 0x0012
|
|
|
|
#define AT803X_INER_INIT 0xec00
|
|
|
|
#define AT803X_INSR 0x0013
|
2013-06-03 14:10:06 -06:00
|
|
|
#define AT803X_DEBUG_ADDR 0x1D
|
|
|
|
#define AT803X_DEBUG_DATA 0x1E
|
|
|
|
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
|
|
|
|
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
|
2012-10-14 13:07:16 -06:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Atheros 803x PHY driver");
|
|
|
|
MODULE_AUTHOR("Matus Ujhelyi");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
2013-06-03 14:10:05 -06:00
|
|
|
static int at803x_set_wol(struct phy_device *phydev,
|
|
|
|
struct ethtool_wolinfo *wol)
|
2012-10-14 13:07:16 -06:00
|
|
|
{
|
|
|
|
struct net_device *ndev = phydev->attached_dev;
|
|
|
|
const u8 *mac;
|
2013-06-03 14:10:05 -06:00
|
|
|
int ret;
|
|
|
|
u32 value;
|
2012-10-14 13:07:16 -06:00
|
|
|
unsigned int i, offsets[] = {
|
|
|
|
AT803X_LOC_MAC_ADDR_32_47_OFFSET,
|
|
|
|
AT803X_LOC_MAC_ADDR_16_31_OFFSET,
|
|
|
|
AT803X_LOC_MAC_ADDR_0_15_OFFSET,
|
|
|
|
};
|
|
|
|
|
|
|
|
if (!ndev)
|
2013-06-03 14:10:05 -06:00
|
|
|
return -ENODEV;
|
2012-10-14 13:07:16 -06:00
|
|
|
|
2013-06-03 14:10:05 -06:00
|
|
|
if (wol->wolopts & WAKE_MAGIC) {
|
|
|
|
mac = (const u8 *) ndev->dev_addr;
|
2012-10-14 13:07:16 -06:00
|
|
|
|
2013-06-03 14:10:05 -06:00
|
|
|
if (!is_valid_ether_addr(mac))
|
|
|
|
return -EFAULT;
|
2012-10-14 13:07:16 -06:00
|
|
|
|
2013-06-03 14:10:05 -06:00
|
|
|
for (i = 0; i < 3; i++) {
|
|
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
|
2012-10-14 13:07:16 -06:00
|
|
|
AT803X_DEVICE_ADDR);
|
2013-06-03 14:10:05 -06:00
|
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
|
2012-10-14 13:07:16 -06:00
|
|
|
offsets[i]);
|
2013-06-03 14:10:05 -06:00
|
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
|
2012-10-14 13:07:16 -06:00
|
|
|
AT803X_FUNC_DATA);
|
2013-06-03 14:10:05 -06:00
|
|
|
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
|
2012-10-14 13:07:16 -06:00
|
|
|
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
|
2013-06-03 14:10:05 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
|
|
value |= AT803X_WOL_ENABLE;
|
|
|
|
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
value = phy_read(phydev, AT803X_INTR_STATUS);
|
|
|
|
} else {
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
|
|
value &= (~AT803X_WOL_ENABLE);
|
|
|
|
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
value = phy_read(phydev, AT803X_INTR_STATUS);
|
2012-10-14 13:07:16 -06:00
|
|
|
}
|
2013-06-03 14:10:05 -06:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void at803x_get_wol(struct phy_device *phydev,
|
|
|
|
struct ethtool_wolinfo *wol)
|
|
|
|
{
|
|
|
|
u32 value;
|
|
|
|
|
|
|
|
wol->supported = WAKE_MAGIC;
|
|
|
|
wol->wolopts = 0;
|
|
|
|
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
|
|
if (value & AT803X_WOL_ENABLE)
|
|
|
|
wol->wolopts |= WAKE_MAGIC;
|
2012-10-14 13:07:16 -06:00
|
|
|
}
|
|
|
|
|
2013-09-21 08:53:02 -06:00
|
|
|
static int at803x_suspend(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int value;
|
|
|
|
int wol_enabled;
|
|
|
|
|
|
|
|
mutex_lock(&phydev->lock);
|
|
|
|
|
|
|
|
value = phy_read(phydev, AT803X_INTR_ENABLE);
|
|
|
|
wol_enabled = value & AT803X_WOL_ENABLE;
|
|
|
|
|
|
|
|
value = phy_read(phydev, MII_BMCR);
|
|
|
|
|
|
|
|
if (wol_enabled)
|
|
|
|
value |= BMCR_ISOLATE;
|
|
|
|
else
|
|
|
|
value |= BMCR_PDOWN;
|
|
|
|
|
|
|
|
phy_write(phydev, MII_BMCR, value);
|
|
|
|
|
|
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at803x_resume(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int value;
|
|
|
|
|
|
|
|
mutex_lock(&phydev->lock);
|
|
|
|
|
|
|
|
value = phy_read(phydev, MII_BMCR);
|
|
|
|
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
|
|
|
|
phy_write(phydev, MII_BMCR, value);
|
|
|
|
|
|
|
|
mutex_unlock(&phydev->lock);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-10-14 13:07:16 -06:00
|
|
|
static int at803x_config_init(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int val;
|
2013-06-03 14:10:06 -06:00
|
|
|
int ret;
|
2012-10-14 13:07:16 -06:00
|
|
|
u32 features;
|
|
|
|
|
|
|
|
features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI |
|
|
|
|
SUPPORTED_FIBRE | SUPPORTED_BNC;
|
|
|
|
|
|
|
|
val = phy_read(phydev, MII_BMSR);
|
|
|
|
if (val < 0)
|
|
|
|
return val;
|
|
|
|
|
|
|
|
if (val & BMSR_ANEGCAPABLE)
|
|
|
|
features |= SUPPORTED_Autoneg;
|
|
|
|
if (val & BMSR_100FULL)
|
|
|
|
features |= SUPPORTED_100baseT_Full;
|
|
|
|
if (val & BMSR_100HALF)
|
|
|
|
features |= SUPPORTED_100baseT_Half;
|
|
|
|
if (val & BMSR_10FULL)
|
|
|
|
features |= SUPPORTED_10baseT_Full;
|
|
|
|
if (val & BMSR_10HALF)
|
|
|
|
features |= SUPPORTED_10baseT_Half;
|
|
|
|
|
|
|
|
if (val & BMSR_ESTATEN) {
|
|
|
|
val = phy_read(phydev, MII_ESTATUS);
|
|
|
|
if (val < 0)
|
|
|
|
return val;
|
|
|
|
|
|
|
|
if (val & ESTATUS_1000_TFULL)
|
|
|
|
features |= SUPPORTED_1000baseT_Full;
|
|
|
|
if (val & ESTATUS_1000_THALF)
|
|
|
|
features |= SUPPORTED_1000baseT_Half;
|
|
|
|
}
|
|
|
|
|
|
|
|
phydev->supported = features;
|
|
|
|
phydev->advertising = features;
|
|
|
|
|
2013-06-03 14:10:06 -06:00
|
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
|
|
|
|
ret = phy_write(phydev, AT803X_DEBUG_ADDR,
|
|
|
|
AT803X_DEBUG_SYSTEM_MODE_CTRL);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
ret = phy_write(phydev, AT803X_DEBUG_DATA,
|
|
|
|
AT803X_DEBUG_RGMII_TX_CLK_DLY);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-10-14 13:07:16 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-03-28 01:39:41 -06:00
|
|
|
static int at803x_ack_interrupt(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = phy_read(phydev, AT803X_INSR);
|
|
|
|
|
|
|
|
return (err < 0) ? err : 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at803x_config_intr(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
int value;
|
|
|
|
|
|
|
|
value = phy_read(phydev, AT803X_INER);
|
|
|
|
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
|
|
err = phy_write(phydev, AT803X_INER,
|
|
|
|
value | AT803X_INER_INIT);
|
|
|
|
else
|
|
|
|
err = phy_write(phydev, AT803X_INER, 0);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2013-06-03 14:10:04 -06:00
|
|
|
static struct phy_driver at803x_driver[] = {
|
|
|
|
{
|
|
|
|
/* ATHEROS 8035 */
|
2012-10-14 13:07:16 -06:00
|
|
|
.phy_id = 0x004dd072,
|
|
|
|
.name = "Atheros 8035 ethernet",
|
|
|
|
.phy_id_mask = 0xffffffef,
|
|
|
|
.config_init = at803x_config_init,
|
2013-06-03 14:10:05 -06:00
|
|
|
.set_wol = at803x_set_wol,
|
|
|
|
.get_wol = at803x_get_wol,
|
2013-09-21 08:53:02 -06:00
|
|
|
.suspend = at803x_suspend,
|
|
|
|
.resume = at803x_resume,
|
2012-10-14 13:07:16 -06:00
|
|
|
.features = PHY_GBIT_FEATURES,
|
|
|
|
.flags = PHY_HAS_INTERRUPT,
|
2013-09-21 08:53:01 -06:00
|
|
|
.config_aneg = genphy_config_aneg,
|
|
|
|
.read_status = genphy_read_status,
|
2012-10-14 13:07:16 -06:00
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
2013-06-03 14:10:04 -06:00
|
|
|
}, {
|
|
|
|
/* ATHEROS 8030 */
|
2012-10-14 13:07:16 -06:00
|
|
|
.phy_id = 0x004dd076,
|
|
|
|
.name = "Atheros 8030 ethernet",
|
|
|
|
.phy_id_mask = 0xffffffef,
|
|
|
|
.config_init = at803x_config_init,
|
2013-06-03 14:10:05 -06:00
|
|
|
.set_wol = at803x_set_wol,
|
|
|
|
.get_wol = at803x_get_wol,
|
2013-09-21 08:53:02 -06:00
|
|
|
.suspend = at803x_suspend,
|
|
|
|
.resume = at803x_resume,
|
2012-10-14 13:07:16 -06:00
|
|
|
.features = PHY_GBIT_FEATURES,
|
|
|
|
.flags = PHY_HAS_INTERRUPT,
|
2013-09-21 08:53:01 -06:00
|
|
|
.config_aneg = genphy_config_aneg,
|
|
|
|
.read_status = genphy_read_status,
|
2012-10-14 13:07:16 -06:00
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
2013-06-03 14:10:07 -06:00
|
|
|
}, {
|
|
|
|
/* ATHEROS 8031 */
|
|
|
|
.phy_id = 0x004dd074,
|
|
|
|
.name = "Atheros 8031 ethernet",
|
|
|
|
.phy_id_mask = 0xffffffef,
|
|
|
|
.config_init = at803x_config_init,
|
|
|
|
.set_wol = at803x_set_wol,
|
|
|
|
.get_wol = at803x_get_wol,
|
2013-09-21 08:53:02 -06:00
|
|
|
.suspend = at803x_suspend,
|
|
|
|
.resume = at803x_resume,
|
2013-06-03 14:10:07 -06:00
|
|
|
.features = PHY_GBIT_FEATURES,
|
|
|
|
.flags = PHY_HAS_INTERRUPT,
|
2013-09-21 08:53:01 -06:00
|
|
|
.config_aneg = genphy_config_aneg,
|
|
|
|
.read_status = genphy_read_status,
|
2014-03-28 01:39:41 -06:00
|
|
|
.ack_interrupt = &at803x_ack_interrupt,
|
|
|
|
.config_intr = &at803x_config_intr,
|
2013-06-03 14:10:07 -06:00
|
|
|
.driver = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
2013-06-03 14:10:04 -06:00
|
|
|
} };
|
2012-10-14 13:07:16 -06:00
|
|
|
|
|
|
|
static int __init atheros_init(void)
|
|
|
|
{
|
2013-06-03 14:10:04 -06:00
|
|
|
return phy_drivers_register(at803x_driver,
|
|
|
|
ARRAY_SIZE(at803x_driver));
|
2012-10-14 13:07:16 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit atheros_exit(void)
|
|
|
|
{
|
2013-06-03 14:10:04 -06:00
|
|
|
return phy_drivers_unregister(at803x_driver,
|
|
|
|
ARRAY_SIZE(at803x_driver));
|
2012-10-14 13:07:16 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
module_init(atheros_init);
|
|
|
|
module_exit(atheros_exit);
|
|
|
|
|
|
|
|
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
|
|
|
|
{ 0x004dd076, 0xffffffef },
|
2013-07-11 05:57:34 -06:00
|
|
|
{ 0x004dd074, 0xffffffef },
|
2012-10-14 13:07:16 -06:00
|
|
|
{ 0x004dd072, 0xffffffef },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(mdio, atheros_tbl);
|