alistair23-linux/fs/btrfs/discard.c

703 lines
22 KiB
C
Raw Normal View History

btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
#include <linux/list.h>
#include <linux/math64.h>
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
#include <linux/sizes.h>
#include <linux/workqueue.h>
#include "ctree.h"
#include "block-group.h"
#include "discard.h"
#include "free-space-cache.h"
/*
* This contains the logic to handle async discard.
*
* Async discard manages trimming of free space outside of transaction commit.
* Discarding is done by managing the block_groups on a LRU list based on free
* space recency. Two passes are used to first prioritize discarding extents
* and then allow for trimming in the bitmap the best opportunity to coalesce.
* The block_groups are maintained on multiple lists to allow for multiple
* passes with different discard filter requirements. A delayed work item is
* used to manage discarding with timeout determined by a max of the delay
* incurred by the iops rate limit, the byte rate limit, and the max delay of
* BTRFS_DISCARD_MAX_DELAY.
*
* Note, this only keeps track of block_groups that are explicitly for data.
* Mixed block_groups are not supported.
*
* The first list is special to manage discarding of fully free block groups.
* This is necessary because we issue a final trim for a full free block group
* after forgetting it. When a block group becomes unused, instead of directly
* being added to the unused_bgs list, we add it to this first list. Then
* from there, if it becomes fully discarded, we place it onto the unused_bgs
* list.
*
* The in-memory free space cache serves as the backing state for discard.
* Consequently this means there is no persistence. We opt to load all the
* block groups in as not discarded, so the mount case degenerates to the
* crashing case.
*
* As the free space cache uses bitmaps, there exists a tradeoff between
* ease/efficiency for find_free_extent() and the accuracy of discard state.
* Here we opt to let untrimmed regions merge with everything while only letting
* trimmed regions merge with other trimmed regions. This can cause
* overtrimming, but the coalescing benefit seems to be worth it. Additionally,
* bitmap state is tracked as a whole. If we're able to fully trim a bitmap,
* the trimmed flag is set on the bitmap. Otherwise, if an allocation comes in,
* this resets the state and we will retry trimming the whole bitmap. This is a
* tradeoff between discard state accuracy and the cost of accounting.
*/
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
/* This is an initial delay to give some chance for block reuse */
#define BTRFS_DISCARD_DELAY (120ULL * NSEC_PER_SEC)
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
#define BTRFS_DISCARD_UNUSED_DELAY (10ULL * NSEC_PER_SEC)
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
/* Target completion latency of discarding all discardable extents */
#define BTRFS_DISCARD_TARGET_MSEC (6 * 60 * 60UL * MSEC_PER_SEC)
#define BTRFS_DISCARD_MIN_DELAY_MSEC (1UL)
#define BTRFS_DISCARD_MAX_DELAY_MSEC (1000UL)
#define BTRFS_DISCARD_MAX_IOPS (10U)
/* Montonically decreasing minimum length filters after index 0 */
static int discard_minlen[BTRFS_NR_DISCARD_LISTS] = {
0,
BTRFS_ASYNC_DISCARD_MAX_FILTER,
BTRFS_ASYNC_DISCARD_MIN_FILTER
};
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
static struct list_head *get_discard_list(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
return &discard_ctl->discard_list[block_group->discard_index];
}
static void __add_to_discard_list(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
{
if (!btrfs_run_discard_work(discard_ctl))
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
return;
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
if (list_empty(&block_group->discard_list) ||
block_group->discard_index == BTRFS_DISCARD_INDEX_UNUSED) {
if (block_group->discard_index == BTRFS_DISCARD_INDEX_UNUSED)
block_group->discard_index = BTRFS_DISCARD_INDEX_START;
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
block_group->discard_eligible_time = (ktime_get_ns() +
BTRFS_DISCARD_DELAY);
block_group->discard_state = BTRFS_DISCARD_RESET_CURSOR;
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
list_move_tail(&block_group->discard_list,
get_discard_list(discard_ctl, block_group));
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
static void add_to_discard_list(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
if (!btrfs_is_block_group_data_only(block_group))
return;
spin_lock(&discard_ctl->lock);
__add_to_discard_list(discard_ctl, block_group);
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
spin_unlock(&discard_ctl->lock);
}
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
static void add_to_discard_unused_list(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
spin_lock(&discard_ctl->lock);
if (!btrfs_run_discard_work(discard_ctl)) {
spin_unlock(&discard_ctl->lock);
return;
}
list_del_init(&block_group->discard_list);
block_group->discard_index = BTRFS_DISCARD_INDEX_UNUSED;
block_group->discard_eligible_time = (ktime_get_ns() +
BTRFS_DISCARD_UNUSED_DELAY);
block_group->discard_state = BTRFS_DISCARD_RESET_CURSOR;
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
list_add_tail(&block_group->discard_list,
&discard_ctl->discard_list[BTRFS_DISCARD_INDEX_UNUSED]);
spin_unlock(&discard_ctl->lock);
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
static bool remove_from_discard_list(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
bool running = false;
spin_lock(&discard_ctl->lock);
if (block_group == discard_ctl->block_group) {
running = true;
discard_ctl->block_group = NULL;
}
block_group->discard_eligible_time = 0;
list_del_init(&block_group->discard_list);
spin_unlock(&discard_ctl->lock);
return running;
}
/**
* find_next_block_group - find block_group that's up next for discarding
* @discard_ctl: discard control
* @now: current time
*
* Iterate over the discard lists to find the next block_group up for
* discarding checking the discard_eligible_time of block_group.
*/
static struct btrfs_block_group *find_next_block_group(
struct btrfs_discard_ctl *discard_ctl,
u64 now)
{
struct btrfs_block_group *ret_block_group = NULL, *block_group;
int i;
for (i = 0; i < BTRFS_NR_DISCARD_LISTS; i++) {
struct list_head *discard_list = &discard_ctl->discard_list[i];
if (!list_empty(discard_list)) {
block_group = list_first_entry(discard_list,
struct btrfs_block_group,
discard_list);
if (!ret_block_group)
ret_block_group = block_group;
if (ret_block_group->discard_eligible_time < now)
break;
if (ret_block_group->discard_eligible_time >
block_group->discard_eligible_time)
ret_block_group = block_group;
}
}
return ret_block_group;
}
/**
* peek_discard_list - wrap find_next_block_group()
* @discard_ctl: discard control
* @discard_state: the discard_state of the block_group after state management
* @discard_index: the discard_index of the block_group after state management
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
*
* This wraps find_next_block_group() and sets the block_group to be in use.
* discard_state's control flow is managed here. Variables related to
* discard_state are reset here as needed (eg discard_cursor). @discard_state
* and @discard_index are remembered as it may change while we're discarding,
* but we want the discard to execute in the context determined here.
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
*/
static struct btrfs_block_group *peek_discard_list(
struct btrfs_discard_ctl *discard_ctl,
enum btrfs_discard_state *discard_state,
int *discard_index)
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
{
struct btrfs_block_group *block_group;
const u64 now = ktime_get_ns();
spin_lock(&discard_ctl->lock);
again:
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
block_group = find_next_block_group(discard_ctl, now);
if (block_group && now > block_group->discard_eligible_time) {
if (block_group->discard_index == BTRFS_DISCARD_INDEX_UNUSED &&
block_group->used != 0) {
if (btrfs_is_block_group_data_only(block_group))
__add_to_discard_list(discard_ctl, block_group);
else
list_del_init(&block_group->discard_list);
goto again;
}
if (block_group->discard_state == BTRFS_DISCARD_RESET_CURSOR) {
block_group->discard_cursor = block_group->start;
block_group->discard_state = BTRFS_DISCARD_EXTENTS;
}
discard_ctl->block_group = block_group;
*discard_state = block_group->discard_state;
*discard_index = block_group->discard_index;
} else {
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
block_group = NULL;
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
spin_unlock(&discard_ctl->lock);
return block_group;
}
/**
* btrfs_discard_check_filter - updates a block groups filters
* @block_group: block group of interest
* @bytes: recently freed region size after coalescing
*
* Async discard maintains multiple lists with progressively smaller filters
* to prioritize discarding based on size. Should a free space that matches
* a larger filter be returned to the free_space_cache, prioritize that discard
* by moving @block_group to the proper filter.
*/
void btrfs_discard_check_filter(struct btrfs_block_group *block_group,
u64 bytes)
{
struct btrfs_discard_ctl *discard_ctl;
if (!block_group ||
!btrfs_test_opt(block_group->fs_info, DISCARD_ASYNC))
return;
discard_ctl = &block_group->fs_info->discard_ctl;
if (block_group->discard_index > BTRFS_DISCARD_INDEX_START &&
bytes >= discard_minlen[block_group->discard_index - 1]) {
int i;
remove_from_discard_list(discard_ctl, block_group);
for (i = BTRFS_DISCARD_INDEX_START; i < BTRFS_NR_DISCARD_LISTS;
i++) {
if (bytes >= discard_minlen[i]) {
block_group->discard_index = i;
add_to_discard_list(discard_ctl, block_group);
break;
}
}
}
}
/**
* btrfs_update_discard_index - moves a block group along the discard lists
* @discard_ctl: discard control
* @block_group: block_group of interest
*
* Increment @block_group's discard_index. If it falls of the list, let it be.
* Otherwise add it back to the appropriate list.
*/
static void btrfs_update_discard_index(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
block_group->discard_index++;
if (block_group->discard_index == BTRFS_NR_DISCARD_LISTS) {
block_group->discard_index = 1;
return;
}
add_to_discard_list(discard_ctl, block_group);
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
/**
* btrfs_discard_cancel_work - remove a block_group from the discard lists
* @discard_ctl: discard control
* @block_group: block_group of interest
*
* This removes @block_group from the discard lists. If necessary, it waits on
* the current work and then reschedules the delayed work.
*/
void btrfs_discard_cancel_work(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
if (remove_from_discard_list(discard_ctl, block_group)) {
cancel_delayed_work_sync(&discard_ctl->work);
btrfs_discard_schedule_work(discard_ctl, true);
}
}
/**
* btrfs_discard_queue_work - handles queuing the block_groups
* @discard_ctl: discard control
* @block_group: block_group of interest
*
* This maintains the LRU order of the discard lists.
*/
void btrfs_discard_queue_work(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
if (!block_group || !btrfs_test_opt(block_group->fs_info, DISCARD_ASYNC))
return;
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
if (block_group->used == 0)
add_to_discard_unused_list(discard_ctl, block_group);
else
add_to_discard_list(discard_ctl, block_group);
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
if (!delayed_work_pending(&discard_ctl->work))
btrfs_discard_schedule_work(discard_ctl, false);
}
/**
* btrfs_discard_schedule_work - responsible for scheduling the discard work
* @discard_ctl: discard control
* @override: override the current timer
*
* Discards are issued by a delayed workqueue item. @override is used to
* update the current delay as the baseline delay interval is reevaluated on
* transaction commit. This is also maxed with any other rate limit.
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
*/
void btrfs_discard_schedule_work(struct btrfs_discard_ctl *discard_ctl,
bool override)
{
struct btrfs_block_group *block_group;
const u64 now = ktime_get_ns();
spin_lock(&discard_ctl->lock);
if (!btrfs_run_discard_work(discard_ctl))
goto out;
if (!override && delayed_work_pending(&discard_ctl->work))
goto out;
block_group = find_next_block_group(discard_ctl, now);
if (block_group) {
unsigned long delay = discard_ctl->delay;
u32 kbps_limit = READ_ONCE(discard_ctl->kbps_limit);
/*
* A single delayed workqueue item is responsible for
* discarding, so we can manage the bytes rate limit by keeping
* track of the previous discard.
*/
if (kbps_limit && discard_ctl->prev_discard) {
u64 bps_limit = ((u64)kbps_limit) * SZ_1K;
u64 bps_delay = div64_u64(discard_ctl->prev_discard *
MSEC_PER_SEC, bps_limit);
delay = max(delay, msecs_to_jiffies(bps_delay));
}
/*
* This timeout is to hopefully prevent immediate discarding
* in a recently allocated block group.
*/
if (now < block_group->discard_eligible_time) {
u64 bg_timeout = block_group->discard_eligible_time - now;
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
delay = max(delay, nsecs_to_jiffies(bg_timeout));
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
mod_delayed_work(discard_ctl->discard_workers,
&discard_ctl->work, delay);
}
out:
spin_unlock(&discard_ctl->lock);
}
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
/**
* btrfs_finish_discard_pass - determine next step of a block_group
* @discard_ctl: discard control
* @block_group: block_group of interest
*
* This determines the next step for a block group after it's finished going
* through a pass on a discard list. If it is unused and fully trimmed, we can
* mark it unused and send it to the unused_bgs path. Otherwise, pass it onto
* the appropriate filter list or let it fall off.
*/
static void btrfs_finish_discard_pass(struct btrfs_discard_ctl *discard_ctl,
struct btrfs_block_group *block_group)
{
remove_from_discard_list(discard_ctl, block_group);
if (block_group->used == 0) {
if (btrfs_is_free_space_trimmed(block_group))
btrfs_mark_bg_unused(block_group);
else
add_to_discard_unused_list(discard_ctl, block_group);
} else {
btrfs_update_discard_index(discard_ctl, block_group);
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
}
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
/**
* btrfs_discard_workfn - discard work function
* @work: work
*
* This finds the next block_group to start discarding and then discards a
* single region. It does this in a two-pass fashion: first extents and second
* bitmaps. Completely discarded block groups are sent to the unused_bgs path.
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
*/
static void btrfs_discard_workfn(struct work_struct *work)
{
struct btrfs_discard_ctl *discard_ctl;
struct btrfs_block_group *block_group;
enum btrfs_discard_state discard_state;
int discard_index = 0;
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
u64 trimmed = 0;
u64 minlen = 0;
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
discard_ctl = container_of(work, struct btrfs_discard_ctl, work.work);
block_group = peek_discard_list(discard_ctl, &discard_state,
&discard_index);
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
if (!block_group || !btrfs_run_discard_work(discard_ctl))
return;
/* Perform discarding */
minlen = discard_minlen[discard_index];
if (discard_state == BTRFS_DISCARD_BITMAPS) {
u64 maxlen = 0;
/*
* Use the previous levels minimum discard length as the max
* length filter. In the case something is added to make a
* region go beyond the max filter, the entire bitmap is set
* back to BTRFS_TRIM_STATE_UNTRIMMED.
*/
if (discard_index != BTRFS_DISCARD_INDEX_UNUSED)
maxlen = discard_minlen[discard_index - 1];
btrfs_trim_block_group_bitmaps(block_group, &trimmed,
block_group->discard_cursor,
btrfs_block_group_end(block_group),
minlen, maxlen, true);
discard_ctl->discard_bitmap_bytes += trimmed;
} else {
btrfs_trim_block_group_extents(block_group, &trimmed,
block_group->discard_cursor,
btrfs_block_group_end(block_group),
minlen, true);
discard_ctl->discard_extent_bytes += trimmed;
}
discard_ctl->prev_discard = trimmed;
/* Determine next steps for a block_group */
if (block_group->discard_cursor >= btrfs_block_group_end(block_group)) {
if (discard_state == BTRFS_DISCARD_BITMAPS) {
btrfs_finish_discard_pass(discard_ctl, block_group);
} else {
block_group->discard_cursor = block_group->start;
spin_lock(&discard_ctl->lock);
if (block_group->discard_state !=
BTRFS_DISCARD_RESET_CURSOR)
block_group->discard_state =
BTRFS_DISCARD_BITMAPS;
spin_unlock(&discard_ctl->lock);
}
}
spin_lock(&discard_ctl->lock);
discard_ctl->block_group = NULL;
spin_unlock(&discard_ctl->lock);
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
btrfs_discard_schedule_work(discard_ctl, false);
}
/**
* btrfs_run_discard_work - determines if async discard should be running
* @discard_ctl: discard control
*
* Checks if the file system is writeable and BTRFS_FS_DISCARD_RUNNING is set.
*/
bool btrfs_run_discard_work(struct btrfs_discard_ctl *discard_ctl)
{
struct btrfs_fs_info *fs_info = container_of(discard_ctl,
struct btrfs_fs_info,
discard_ctl);
return (!(fs_info->sb->s_flags & SB_RDONLY) &&
test_bit(BTRFS_FS_DISCARD_RUNNING, &fs_info->flags));
}
/**
* btrfs_discard_calc_delay - recalculate the base delay
* @discard_ctl: discard control
*
* Recalculate the base delay which is based off the total number of
* discardable_extents. Clamp this between the lower_limit (iops_limit or 1ms)
* and the upper_limit (BTRFS_DISCARD_MAX_DELAY_MSEC).
*/
void btrfs_discard_calc_delay(struct btrfs_discard_ctl *discard_ctl)
{
s32 discardable_extents;
s64 discardable_bytes;
u32 iops_limit;
unsigned long delay;
unsigned long lower_limit = BTRFS_DISCARD_MIN_DELAY_MSEC;
discardable_extents = atomic_read(&discard_ctl->discardable_extents);
if (!discardable_extents)
return;
spin_lock(&discard_ctl->lock);
/*
* The following is to fix a potential -1 discrepenancy that we're not
* sure how to reproduce. But given that this is the only place that
* utilizes these numbers and this is only called by from
* btrfs_finish_extent_commit() which is synchronized, we can correct
* here.
*/
if (discardable_extents < 0)
atomic_add(-discardable_extents,
&discard_ctl->discardable_extents);
discardable_bytes = atomic64_read(&discard_ctl->discardable_bytes);
if (discardable_bytes < 0)
atomic64_add(-discardable_bytes,
&discard_ctl->discardable_bytes);
if (discardable_extents <= 0) {
spin_unlock(&discard_ctl->lock);
return;
}
iops_limit = READ_ONCE(discard_ctl->iops_limit);
if (iops_limit)
lower_limit = max_t(unsigned long, lower_limit,
MSEC_PER_SEC / iops_limit);
delay = BTRFS_DISCARD_TARGET_MSEC / discardable_extents;
delay = clamp(delay, lower_limit, BTRFS_DISCARD_MAX_DELAY_MSEC);
discard_ctl->delay = msecs_to_jiffies(delay);
spin_unlock(&discard_ctl->lock);
}
/**
* btrfs_discard_update_discardable - propagate discard counters
* @block_group: block_group of interest
* @ctl: free_space_ctl of @block_group
*
* This propagates deltas of counters up to the discard_ctl. It maintains a
* current counter and a previous counter passing the delta up to the global
* stat. Then the current counter value becomes the previous counter value.
*/
void btrfs_discard_update_discardable(struct btrfs_block_group *block_group,
struct btrfs_free_space_ctl *ctl)
{
struct btrfs_discard_ctl *discard_ctl;
s32 extents_delta;
s64 bytes_delta;
if (!block_group ||
!btrfs_test_opt(block_group->fs_info, DISCARD_ASYNC) ||
!btrfs_is_block_group_data_only(block_group))
return;
discard_ctl = &block_group->fs_info->discard_ctl;
extents_delta = ctl->discardable_extents[BTRFS_STAT_CURR] -
ctl->discardable_extents[BTRFS_STAT_PREV];
if (extents_delta) {
atomic_add(extents_delta, &discard_ctl->discardable_extents);
ctl->discardable_extents[BTRFS_STAT_PREV] =
ctl->discardable_extents[BTRFS_STAT_CURR];
}
bytes_delta = ctl->discardable_bytes[BTRFS_STAT_CURR] -
ctl->discardable_bytes[BTRFS_STAT_PREV];
if (bytes_delta) {
atomic64_add(bytes_delta, &discard_ctl->discardable_bytes);
ctl->discardable_bytes[BTRFS_STAT_PREV] =
ctl->discardable_bytes[BTRFS_STAT_CURR];
}
}
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
/**
* btrfs_discard_punt_unused_bgs_list - punt unused_bgs list to discard lists
* @fs_info: fs_info of interest
*
* The unused_bgs list needs to be punted to the discard lists because the
* order of operations is changed. In the normal sychronous discard path, the
* block groups are trimmed via a single large trim in transaction commit. This
* is ultimately what we are trying to avoid with asynchronous discard. Thus,
* it must be done before going down the unused_bgs path.
*/
void btrfs_discard_punt_unused_bgs_list(struct btrfs_fs_info *fs_info)
{
struct btrfs_block_group *block_group, *next;
spin_lock(&fs_info->unused_bgs_lock);
/* We enabled async discard, so punt all to the queue */
list_for_each_entry_safe(block_group, next, &fs_info->unused_bgs,
bg_list) {
list_del_init(&block_group->bg_list);
btrfs_discard_queue_work(&fs_info->discard_ctl, block_group);
}
spin_unlock(&fs_info->unused_bgs_lock);
}
/**
* btrfs_discard_purge_list - purge discard lists
* @discard_ctl: discard control
*
* If we are disabling async discard, we may have intercepted block groups that
* are completely free and ready for the unused_bgs path. As discarding will
* now happen in transaction commit or not at all, we can safely mark the
* corresponding block groups as unused and they will be sent on their merry
* way to the unused_bgs list.
*/
static void btrfs_discard_purge_list(struct btrfs_discard_ctl *discard_ctl)
{
struct btrfs_block_group *block_group, *next;
int i;
spin_lock(&discard_ctl->lock);
for (i = 0; i < BTRFS_NR_DISCARD_LISTS; i++) {
list_for_each_entry_safe(block_group, next,
&discard_ctl->discard_list[i],
discard_list) {
list_del_init(&block_group->discard_list);
spin_unlock(&discard_ctl->lock);
if (block_group->used == 0)
btrfs_mark_bg_unused(block_group);
spin_lock(&discard_ctl->lock);
}
}
spin_unlock(&discard_ctl->lock);
}
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
void btrfs_discard_resume(struct btrfs_fs_info *fs_info)
{
if (!btrfs_test_opt(fs_info, DISCARD_ASYNC)) {
btrfs_discard_cleanup(fs_info);
return;
}
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
btrfs_discard_punt_unused_bgs_list(fs_info);
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
set_bit(BTRFS_FS_DISCARD_RUNNING, &fs_info->flags);
}
void btrfs_discard_stop(struct btrfs_fs_info *fs_info)
{
clear_bit(BTRFS_FS_DISCARD_RUNNING, &fs_info->flags);
}
void btrfs_discard_init(struct btrfs_fs_info *fs_info)
{
struct btrfs_discard_ctl *discard_ctl = &fs_info->discard_ctl;
int i;
spin_lock_init(&discard_ctl->lock);
INIT_DELAYED_WORK(&discard_ctl->work, btrfs_discard_workfn);
for (i = 0; i < BTRFS_NR_DISCARD_LISTS; i++)
INIT_LIST_HEAD(&discard_ctl->discard_list[i]);
discard_ctl->prev_discard = 0;
atomic_set(&discard_ctl->discardable_extents, 0);
atomic64_set(&discard_ctl->discardable_bytes, 0);
discard_ctl->max_discard_size = BTRFS_ASYNC_DISCARD_DEFAULT_MAX_SIZE;
discard_ctl->delay = BTRFS_DISCARD_MAX_DELAY_MSEC;
discard_ctl->iops_limit = BTRFS_DISCARD_MAX_IOPS;
discard_ctl->kbps_limit = 0;
discard_ctl->discard_extent_bytes = 0;
discard_ctl->discard_bitmap_bytes = 0;
atomic64_set(&discard_ctl->discard_bytes_saved, 0);
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
}
void btrfs_discard_cleanup(struct btrfs_fs_info *fs_info)
{
btrfs_discard_stop(fs_info);
cancel_delayed_work_sync(&fs_info->discard_ctl.work);
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:15 -07:00
btrfs_discard_purge_list(&fs_info->discard_ctl);
btrfs: add the beginning of async discard, discard workqueue When discard is enabled, everytime a pinned extent is released back to the block_group's free space cache, a discard is issued for the extent. This is an overeager approach when it comes to discarding and helping the SSD maintain enough free space to prevent severe garbage collection situations. This adds the beginning of async discard. Instead of issuing a discard prior to returning it to the free space, it is just marked as untrimmed. The block_group is then added to a LRU which then feeds into a workqueue to issue discards at a much slower rate. Full discarding of unused block groups is still done and will be addressed in a future patch of the series. For now, we don't persist the discard state of extents and bitmaps. Therefore, our failure recovery mode will be to consider extents untrimmed. This lets us handle failure and unmounting as one in the same. On a number of Facebook webservers, I collected data every minute accounting the time we spent in btrfs_finish_extent_commit() (col. 1) and in btrfs_commit_transaction() (col. 2). btrfs_finish_extent_commit() is where we discard extents synchronously before returning them to the free space cache. discard=sync: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) --------------------------------------------------------------- Drive A | 434 | 1170 Drive B | 880 | 2330 Drive C | 2943 | 3920 Drive D | 4763 | 5701 discard=async: p99 total per minute p99 total per minute Drive | extent_commit() (ms) | commit_trans() (ms) -------------------------------------------------------------- Drive A | 134 | 956 Drive B | 64 | 1972 Drive C | 59 | 1032 Drive D | 62 | 1200 While it's not great that the stats are cumulative over 1m, all of these servers are running the same workload and and the delta between the two are substantial. We are spending significantly less time in btrfs_finish_extent_commit() which is responsible for discarding. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-13 17:22:14 -07:00
}