1
0
Fork 0
alistair23-linux/net/core/dev.c

8415 lines
209 KiB
C
Raw Normal View History

/*
* NET3 Protocol independent device support routines.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Derived from the non IP parts of dev.c 1.0.19
* Authors: Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
* Mark Evans, <evansmp@uhura.aston.ac.uk>
*
* Additional Authors:
* Florian la Roche <rzsfl@rz.uni-sb.de>
* Alan Cox <gw4pts@gw4pts.ampr.org>
* David Hinds <dahinds@users.sourceforge.net>
* Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
* Adam Sulmicki <adam@cfar.umd.edu>
* Pekka Riikonen <priikone@poesidon.pspt.fi>
*
* Changes:
* D.J. Barrow : Fixed bug where dev->refcnt gets set
* to 2 if register_netdev gets called
* before net_dev_init & also removed a
* few lines of code in the process.
* Alan Cox : device private ioctl copies fields back.
* Alan Cox : Transmit queue code does relevant
* stunts to keep the queue safe.
* Alan Cox : Fixed double lock.
* Alan Cox : Fixed promisc NULL pointer trap
* ???????? : Support the full private ioctl range
* Alan Cox : Moved ioctl permission check into
* drivers
* Tim Kordas : SIOCADDMULTI/SIOCDELMULTI
* Alan Cox : 100 backlog just doesn't cut it when
* you start doing multicast video 8)
* Alan Cox : Rewrote net_bh and list manager.
* Alan Cox : Fix ETH_P_ALL echoback lengths.
* Alan Cox : Took out transmit every packet pass
* Saved a few bytes in the ioctl handler
* Alan Cox : Network driver sets packet type before
* calling netif_rx. Saves a function
* call a packet.
* Alan Cox : Hashed net_bh()
* Richard Kooijman: Timestamp fixes.
* Alan Cox : Wrong field in SIOCGIFDSTADDR
* Alan Cox : Device lock protection.
* Alan Cox : Fixed nasty side effect of device close
* changes.
* Rudi Cilibrasi : Pass the right thing to
* set_mac_address()
* Dave Miller : 32bit quantity for the device lock to
* make it work out on a Sparc.
* Bjorn Ekwall : Added KERNELD hack.
* Alan Cox : Cleaned up the backlog initialise.
* Craig Metz : SIOCGIFCONF fix if space for under
* 1 device.
* Thomas Bogendoerfer : Return ENODEV for dev_open, if there
* is no device open function.
* Andi Kleen : Fix error reporting for SIOCGIFCONF
* Michael Chastain : Fix signed/unsigned for SIOCGIFCONF
* Cyrus Durgin : Cleaned for KMOD
* Adam Sulmicki : Bug Fix : Network Device Unload
* A network device unload needs to purge
* the backlog queue.
* Paul Rusty Russell : SIOCSIFNAME
* Pekka Riikonen : Netdev boot-time settings code
* Andrew Morton : Make unregister_netdevice wait
* indefinitely on dev->refcnt
* J Hadi Salim : - Backlog queue sampling
* - netif_rx() feedback
*/
#include <linux/uaccess.h>
#include <linux/bitops.h>
#include <linux/capability.h>
#include <linux/cpu.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/hash.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/notifier.h>
#include <linux/skbuff.h>
#include <linux/bpf.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/busy_poll.h>
#include <linux/rtnetlink.h>
#include <linux/stat.h>
#include <net/dst.h>
#include <net/dst_metadata.h>
#include <net/pkt_sched.h>
#include <net/checksum.h>
#include <net/xfrm.h>
#include <linux/highmem.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/netpoll.h>
#include <linux/rcupdate.h>
#include <linux/delay.h>
#include <net/iw_handler.h>
#include <asm/current.h>
#include <linux/audit.h>
#include <linux/dmaengine.h>
#include <linux/err.h>
#include <linux/ctype.h>
#include <linux/if_arp.h>
#include <linux/if_vlan.h>
#include <linux/ip.h>
#include <net/ip.h>
#include <net/mpls.h>
#include <linux/ipv6.h>
#include <linux/in.h>
#include <linux/jhash.h>
#include <linux/random.h>
#include <trace/events/napi.h>
#include <trace/events/net.h>
#include <trace/events/skb.h>
#include <linux/pci.h>
#include <linux/inetdevice.h>
#include <linux/cpu_rmap.h>
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
#include <linux/static_key.h>
#include <linux/hashtable.h>
#include <linux/vmalloc.h>
#include <linux/if_macvlan.h>
#include <linux/errqueue.h>
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
#include <linux/hrtimer.h>
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
#include <linux/netfilter_ingress.h>
#include <linux/crash_dump.h>
#include "net-sysfs.h"
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
/* Instead of increasing this, you should create a hash table. */
#define MAX_GRO_SKBS 8
/* This should be increased if a protocol with a bigger head is added. */
#define GRO_MAX_HEAD (MAX_HEADER + 128)
static DEFINE_SPINLOCK(ptype_lock);
static DEFINE_SPINLOCK(offload_lock);
struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly;
struct list_head ptype_all __read_mostly; /* Taps */
static struct list_head offload_base __read_mostly;
static int netif_rx_internal(struct sk_buff *skb);
static int call_netdevice_notifiers_info(unsigned long val,
struct net_device *dev,
struct netdev_notifier_info *info);
/*
* The @dev_base_head list is protected by @dev_base_lock and the rtnl
* semaphore.
*
* Pure readers hold dev_base_lock for reading, or rcu_read_lock()
*
* Writers must hold the rtnl semaphore while they loop through the
* dev_base_head list, and hold dev_base_lock for writing when they do the
* actual updates. This allows pure readers to access the list even
* while a writer is preparing to update it.
*
* To put it another way, dev_base_lock is held for writing only to
* protect against pure readers; the rtnl semaphore provides the
* protection against other writers.
*
* See, for example usages, register_netdevice() and
* unregister_netdevice(), which must be called with the rtnl
* semaphore held.
*/
DEFINE_RWLOCK(dev_base_lock);
EXPORT_SYMBOL(dev_base_lock);
/* protects napi_hash addition/deletion and napi_gen_id */
static DEFINE_SPINLOCK(napi_hash_lock);
static unsigned int napi_gen_id = NR_CPUS;
static DEFINE_READ_MOSTLY_HASHTABLE(napi_hash, 8);
static seqcount_t devnet_rename_seq;
static inline void dev_base_seq_inc(struct net *net)
{
while (++net->dev_base_seq == 0);
}
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
static inline struct hlist_head *dev_name_hash(struct net *net, const char *name)
{
unsigned int hash = full_name_hash(net, name, strnlen(name, IFNAMSIZ));
return &net->dev_name_head[hash_32(hash, NETDEV_HASHBITS)];
}
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
static inline struct hlist_head *dev_index_hash(struct net *net, int ifindex)
{
return &net->dev_index_head[ifindex & (NETDEV_HASHENTRIES - 1)];
}
static inline void rps_lock(struct softnet_data *sd)
{
#ifdef CONFIG_RPS
spin_lock(&sd->input_pkt_queue.lock);
#endif
}
static inline void rps_unlock(struct softnet_data *sd)
{
#ifdef CONFIG_RPS
spin_unlock(&sd->input_pkt_queue.lock);
#endif
}
/* Device list insertion */
static void list_netdevice(struct net_device *dev)
{
struct net *net = dev_net(dev);
ASSERT_RTNL();
write_lock_bh(&dev_base_lock);
list_add_tail_rcu(&dev->dev_list, &net->dev_base_head);
hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name));
hlist_add_head_rcu(&dev->index_hlist,
dev_index_hash(net, dev->ifindex));
write_unlock_bh(&dev_base_lock);
dev_base_seq_inc(net);
}
/* Device list removal
* caller must respect a RCU grace period before freeing/reusing dev
*/
static void unlist_netdevice(struct net_device *dev)
{
ASSERT_RTNL();
/* Unlink dev from the device chain */
write_lock_bh(&dev_base_lock);
list_del_rcu(&dev->dev_list);
hlist_del_rcu(&dev->name_hlist);
hlist_del_rcu(&dev->index_hlist);
write_unlock_bh(&dev_base_lock);
dev_base_seq_inc(dev_net(dev));
}
/*
* Our notifier list
*/
static RAW_NOTIFIER_HEAD(netdev_chain);
/*
* Device drivers call our routines to queue packets here. We empty the
* queue in the local softnet handler.
*/
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
DEFINE_PER_CPU_ALIGNED(struct softnet_data, softnet_data);
EXPORT_PER_CPU_SYMBOL(softnet_data);
#ifdef CONFIG_LOCKDEP
/*
* register_netdevice() inits txq->_xmit_lock and sets lockdep class
* according to dev->type
*/
static const unsigned short netdev_lock_type[] =
{ARPHRD_NETROM, ARPHRD_ETHER, ARPHRD_EETHER, ARPHRD_AX25,
ARPHRD_PRONET, ARPHRD_CHAOS, ARPHRD_IEEE802, ARPHRD_ARCNET,
ARPHRD_APPLETLK, ARPHRD_DLCI, ARPHRD_ATM, ARPHRD_METRICOM,
ARPHRD_IEEE1394, ARPHRD_EUI64, ARPHRD_INFINIBAND, ARPHRD_SLIP,
ARPHRD_CSLIP, ARPHRD_SLIP6, ARPHRD_CSLIP6, ARPHRD_RSRVD,
ARPHRD_ADAPT, ARPHRD_ROSE, ARPHRD_X25, ARPHRD_HWX25,
ARPHRD_PPP, ARPHRD_CISCO, ARPHRD_LAPB, ARPHRD_DDCMP,
ARPHRD_RAWHDLC, ARPHRD_TUNNEL, ARPHRD_TUNNEL6, ARPHRD_FRAD,
ARPHRD_SKIP, ARPHRD_LOOPBACK, ARPHRD_LOCALTLK, ARPHRD_FDDI,
ARPHRD_BIF, ARPHRD_SIT, ARPHRD_IPDDP, ARPHRD_IPGRE,
ARPHRD_PIMREG, ARPHRD_HIPPI, ARPHRD_ASH, ARPHRD_ECONET,
ARPHRD_IRDA, ARPHRD_FCPP, ARPHRD_FCAL, ARPHRD_FCPL,
ARPHRD_FCFABRIC, ARPHRD_IEEE80211, ARPHRD_IEEE80211_PRISM,
ARPHRD_IEEE80211_RADIOTAP, ARPHRD_PHONET, ARPHRD_PHONET_PIPE,
ARPHRD_IEEE802154, ARPHRD_VOID, ARPHRD_NONE};
static const char *const netdev_lock_name[] =
{"_xmit_NETROM", "_xmit_ETHER", "_xmit_EETHER", "_xmit_AX25",
"_xmit_PRONET", "_xmit_CHAOS", "_xmit_IEEE802", "_xmit_ARCNET",
"_xmit_APPLETLK", "_xmit_DLCI", "_xmit_ATM", "_xmit_METRICOM",
"_xmit_IEEE1394", "_xmit_EUI64", "_xmit_INFINIBAND", "_xmit_SLIP",
"_xmit_CSLIP", "_xmit_SLIP6", "_xmit_CSLIP6", "_xmit_RSRVD",
"_xmit_ADAPT", "_xmit_ROSE", "_xmit_X25", "_xmit_HWX25",
"_xmit_PPP", "_xmit_CISCO", "_xmit_LAPB", "_xmit_DDCMP",
"_xmit_RAWHDLC", "_xmit_TUNNEL", "_xmit_TUNNEL6", "_xmit_FRAD",
"_xmit_SKIP", "_xmit_LOOPBACK", "_xmit_LOCALTLK", "_xmit_FDDI",
"_xmit_BIF", "_xmit_SIT", "_xmit_IPDDP", "_xmit_IPGRE",
"_xmit_PIMREG", "_xmit_HIPPI", "_xmit_ASH", "_xmit_ECONET",
"_xmit_IRDA", "_xmit_FCPP", "_xmit_FCAL", "_xmit_FCPL",
"_xmit_FCFABRIC", "_xmit_IEEE80211", "_xmit_IEEE80211_PRISM",
"_xmit_IEEE80211_RADIOTAP", "_xmit_PHONET", "_xmit_PHONET_PIPE",
"_xmit_IEEE802154", "_xmit_VOID", "_xmit_NONE"};
static struct lock_class_key netdev_xmit_lock_key[ARRAY_SIZE(netdev_lock_type)];
static struct lock_class_key netdev_addr_lock_key[ARRAY_SIZE(netdev_lock_type)];
static inline unsigned short netdev_lock_pos(unsigned short dev_type)
{
int i;
for (i = 0; i < ARRAY_SIZE(netdev_lock_type); i++)
if (netdev_lock_type[i] == dev_type)
return i;
/* the last key is used by default */
return ARRAY_SIZE(netdev_lock_type) - 1;
}
static inline void netdev_set_xmit_lockdep_class(spinlock_t *lock,
unsigned short dev_type)
{
int i;
i = netdev_lock_pos(dev_type);
lockdep_set_class_and_name(lock, &netdev_xmit_lock_key[i],
netdev_lock_name[i]);
}
static inline void netdev_set_addr_lockdep_class(struct net_device *dev)
{
int i;
i = netdev_lock_pos(dev->type);
lockdep_set_class_and_name(&dev->addr_list_lock,
&netdev_addr_lock_key[i],
netdev_lock_name[i]);
}
#else
static inline void netdev_set_xmit_lockdep_class(spinlock_t *lock,
unsigned short dev_type)
{
}
static inline void netdev_set_addr_lockdep_class(struct net_device *dev)
{
}
#endif
/*******************************************************************************
Protocol management and registration routines
*******************************************************************************/
/*
* Add a protocol ID to the list. Now that the input handler is
* smarter we can dispense with all the messy stuff that used to be
* here.
*
* BEWARE!!! Protocol handlers, mangling input packets,
* MUST BE last in hash buckets and checking protocol handlers
* MUST start from promiscuous ptype_all chain in net_bh.
* It is true now, do not change it.
* Explanation follows: if protocol handler, mangling packet, will
* be the first on list, it is not able to sense, that packet
* is cloned and should be copied-on-write, so that it will
* change it and subsequent readers will get broken packet.
* --ANK (980803)
*/
static inline struct list_head *ptype_head(const struct packet_type *pt)
{
if (pt->type == htons(ETH_P_ALL))
return pt->dev ? &pt->dev->ptype_all : &ptype_all;
else
return pt->dev ? &pt->dev->ptype_specific :
&ptype_base[ntohs(pt->type) & PTYPE_HASH_MASK];
}
/**
* dev_add_pack - add packet handler
* @pt: packet type declaration
*
* Add a protocol handler to the networking stack. The passed &packet_type
* is linked into kernel lists and may not be freed until it has been
* removed from the kernel lists.
*
* This call does not sleep therefore it can not
* guarantee all CPU's that are in middle of receiving packets
* will see the new packet type (until the next received packet).
*/
void dev_add_pack(struct packet_type *pt)
{
struct list_head *head = ptype_head(pt);
spin_lock(&ptype_lock);
list_add_rcu(&pt->list, head);
spin_unlock(&ptype_lock);
}
EXPORT_SYMBOL(dev_add_pack);
/**
* __dev_remove_pack - remove packet handler
* @pt: packet type declaration
*
* Remove a protocol handler that was previously added to the kernel
* protocol handlers by dev_add_pack(). The passed &packet_type is removed
* from the kernel lists and can be freed or reused once this function
* returns.
*
* The packet type might still be in use by receivers
* and must not be freed until after all the CPU's have gone
* through a quiescent state.
*/
void __dev_remove_pack(struct packet_type *pt)
{
struct list_head *head = ptype_head(pt);
struct packet_type *pt1;
spin_lock(&ptype_lock);
list_for_each_entry(pt1, head, list) {
if (pt == pt1) {
list_del_rcu(&pt->list);
goto out;
}
}
pr_warn("dev_remove_pack: %p not found\n", pt);
out:
spin_unlock(&ptype_lock);
}
EXPORT_SYMBOL(__dev_remove_pack);
/**
* dev_remove_pack - remove packet handler
* @pt: packet type declaration
*
* Remove a protocol handler that was previously added to the kernel
* protocol handlers by dev_add_pack(). The passed &packet_type is removed
* from the kernel lists and can be freed or reused once this function
* returns.
*
* This call sleeps to guarantee that no CPU is looking at the packet
* type after return.
*/
void dev_remove_pack(struct packet_type *pt)
{
__dev_remove_pack(pt);
synchronize_net();
}
EXPORT_SYMBOL(dev_remove_pack);
/**
* dev_add_offload - register offload handlers
* @po: protocol offload declaration
*
* Add protocol offload handlers to the networking stack. The passed
* &proto_offload is linked into kernel lists and may not be freed until
* it has been removed from the kernel lists.
*
* This call does not sleep therefore it can not
* guarantee all CPU's that are in middle of receiving packets
* will see the new offload handlers (until the next received packet).
*/
void dev_add_offload(struct packet_offload *po)
{
struct packet_offload *elem;
spin_lock(&offload_lock);
list_for_each_entry(elem, &offload_base, list) {
if (po->priority < elem->priority)
break;
}
list_add_rcu(&po->list, elem->list.prev);
spin_unlock(&offload_lock);
}
EXPORT_SYMBOL(dev_add_offload);
/**
* __dev_remove_offload - remove offload handler
* @po: packet offload declaration
*
* Remove a protocol offload handler that was previously added to the
* kernel offload handlers by dev_add_offload(). The passed &offload_type
* is removed from the kernel lists and can be freed or reused once this
* function returns.
*
* The packet type might still be in use by receivers
* and must not be freed until after all the CPU's have gone
* through a quiescent state.
*/
static void __dev_remove_offload(struct packet_offload *po)
{
struct list_head *head = &offload_base;
struct packet_offload *po1;
spin_lock(&offload_lock);
list_for_each_entry(po1, head, list) {
if (po == po1) {
list_del_rcu(&po->list);
goto out;
}
}
pr_warn("dev_remove_offload: %p not found\n", po);
out:
spin_unlock(&offload_lock);
}
/**
* dev_remove_offload - remove packet offload handler
* @po: packet offload declaration
*
* Remove a packet offload handler that was previously added to the kernel
* offload handlers by dev_add_offload(). The passed &offload_type is
* removed from the kernel lists and can be freed or reused once this
* function returns.
*
* This call sleeps to guarantee that no CPU is looking at the packet
* type after return.
*/
void dev_remove_offload(struct packet_offload *po)
{
__dev_remove_offload(po);
synchronize_net();
}
EXPORT_SYMBOL(dev_remove_offload);
/******************************************************************************
Device Boot-time Settings Routines
*******************************************************************************/
/* Boot time configuration table */
static struct netdev_boot_setup dev_boot_setup[NETDEV_BOOT_SETUP_MAX];
/**
* netdev_boot_setup_add - add new setup entry
* @name: name of the device
* @map: configured settings for the device
*
* Adds new setup entry to the dev_boot_setup list. The function
* returns 0 on error and 1 on success. This is a generic routine to
* all netdevices.
*/
static int netdev_boot_setup_add(char *name, struct ifmap *map)
{
struct netdev_boot_setup *s;
int i;
s = dev_boot_setup;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] == '\0' || s[i].name[0] == ' ') {
memset(s[i].name, 0, sizeof(s[i].name));
strlcpy(s[i].name, name, IFNAMSIZ);
memcpy(&s[i].map, map, sizeof(s[i].map));
break;
}
}
return i >= NETDEV_BOOT_SETUP_MAX ? 0 : 1;
}
/**
* netdev_boot_setup_check - check boot time settings
* @dev: the netdevice
*
* Check boot time settings for the device.
* The found settings are set for the device to be used
* later in the device probing.
* Returns 0 if no settings found, 1 if they are.
*/
int netdev_boot_setup_check(struct net_device *dev)
{
struct netdev_boot_setup *s = dev_boot_setup;
int i;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) {
if (s[i].name[0] != '\0' && s[i].name[0] != ' ' &&
!strcmp(dev->name, s[i].name)) {
dev->irq = s[i].map.irq;
dev->base_addr = s[i].map.base_addr;
dev->mem_start = s[i].map.mem_start;
dev->mem_end = s[i].map.mem_end;
return 1;
}
}
return 0;
}
EXPORT_SYMBOL(netdev_boot_setup_check);
/**
* netdev_boot_base - get address from boot time settings
* @prefix: prefix for network device
* @unit: id for network device
*
* Check boot time settings for the base address of device.
* The found settings are set for the device to be used
* later in the device probing.
* Returns 0 if no settings found.
*/
unsigned long netdev_boot_base(const char *prefix, int unit)
{
const struct netdev_boot_setup *s = dev_boot_setup;
char name[IFNAMSIZ];
int i;
sprintf(name, "%s%d", prefix, unit);
/*
* If device already registered then return base of 1
* to indicate not to probe for this interface
*/
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
if (__dev_get_by_name(&init_net, name))
return 1;
for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++)
if (!strcmp(name, s[i].name))
return s[i].map.base_addr;
return 0;
}
/*
* Saves at boot time configured settings for any netdevice.
*/
int __init netdev_boot_setup(char *str)
{
int ints[5];
struct ifmap map;
str = get_options(str, ARRAY_SIZE(ints), ints);
if (!str || !*str)
return 0;
/* Save settings */
memset(&map, 0, sizeof(map));
if (ints[0] > 0)
map.irq = ints[1];
if (ints[0] > 1)
map.base_addr = ints[2];
if (ints[0] > 2)
map.mem_start = ints[3];
if (ints[0] > 3)
map.mem_end = ints[4];
/* Add new entry to the list */
return netdev_boot_setup_add(str, &map);
}
__setup("netdev=", netdev_boot_setup);
/*******************************************************************************
Device Interface Subroutines
*******************************************************************************/
/**
* dev_get_iflink - get 'iflink' value of a interface
* @dev: targeted interface
*
* Indicates the ifindex the interface is linked to.
* Physical interfaces have the same 'ifindex' and 'iflink' values.
*/
int dev_get_iflink(const struct net_device *dev)
{
if (dev->netdev_ops && dev->netdev_ops->ndo_get_iflink)
return dev->netdev_ops->ndo_get_iflink(dev);
return dev->ifindex;
}
EXPORT_SYMBOL(dev_get_iflink);
/**
* dev_fill_metadata_dst - Retrieve tunnel egress information.
* @dev: targeted interface
* @skb: The packet.
*
* For better visibility of tunnel traffic OVS needs to retrieve
* egress tunnel information for a packet. Following API allows
* user to get this info.
*/
int dev_fill_metadata_dst(struct net_device *dev, struct sk_buff *skb)
{
struct ip_tunnel_info *info;
if (!dev->netdev_ops || !dev->netdev_ops->ndo_fill_metadata_dst)
return -EINVAL;
info = skb_tunnel_info_unclone(skb);
if (!info)
return -ENOMEM;
if (unlikely(!(info->mode & IP_TUNNEL_INFO_TX)))
return -EINVAL;
return dev->netdev_ops->ndo_fill_metadata_dst(dev, skb);
}
EXPORT_SYMBOL_GPL(dev_fill_metadata_dst);
/**
* __dev_get_by_name - find a device by its name
* @net: the applicable net namespace
* @name: name to find
*
* Find an interface by name. Must be called under RTNL semaphore
* or @dev_base_lock. If the name is found a pointer to the device
* is returned. If the name is not found then %NULL is returned. The
* reference counters are not incremented so the caller must be
* careful with locks.
*/
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net_device *__dev_get_by_name(struct net *net, const char *name)
{
struct net_device *dev;
struct hlist_head *head = dev_name_hash(net, name);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 18:06:00 -07:00
hlist_for_each_entry(dev, head, name_hlist)
if (!strncmp(dev->name, name, IFNAMSIZ))
return dev;
return NULL;
}
EXPORT_SYMBOL(__dev_get_by_name);
/**
* dev_get_by_name_rcu - find a device by its name
* @net: the applicable net namespace
* @name: name to find
*
* Find an interface by name.
* If the name is found a pointer to the device is returned.
* If the name is not found then %NULL is returned.
* The reference counters are not incremented so the caller must be
* careful with locks. The caller must hold RCU lock.
*/
struct net_device *dev_get_by_name_rcu(struct net *net, const char *name)
{
struct net_device *dev;
struct hlist_head *head = dev_name_hash(net, name);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 18:06:00 -07:00
hlist_for_each_entry_rcu(dev, head, name_hlist)
if (!strncmp(dev->name, name, IFNAMSIZ))
return dev;
return NULL;
}
EXPORT_SYMBOL(dev_get_by_name_rcu);
/**
* dev_get_by_name - find a device by its name
* @net: the applicable net namespace
* @name: name to find
*
* Find an interface by name. This can be called from any
* context and does its own locking. The returned handle has
* the usage count incremented and the caller must use dev_put() to
* release it when it is no longer needed. %NULL is returned if no
* matching device is found.
*/
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net_device *dev_get_by_name(struct net *net, const char *name)
{
struct net_device *dev;
rcu_read_lock();
dev = dev_get_by_name_rcu(net, name);
if (dev)
dev_hold(dev);
rcu_read_unlock();
return dev;
}
EXPORT_SYMBOL(dev_get_by_name);
/**
* __dev_get_by_index - find a device by its ifindex
* @net: the applicable net namespace
* @ifindex: index of device
*
* Search for an interface by index. Returns %NULL if the device
* is not found or a pointer to the device. The device has not
* had its reference counter increased so the caller must be careful
* about locking. The caller must hold either the RTNL semaphore
* or @dev_base_lock.
*/
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net_device *__dev_get_by_index(struct net *net, int ifindex)
{
struct net_device *dev;
struct hlist_head *head = dev_index_hash(net, ifindex);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 18:06:00 -07:00
hlist_for_each_entry(dev, head, index_hlist)
if (dev->ifindex == ifindex)
return dev;
return NULL;
}
EXPORT_SYMBOL(__dev_get_by_index);
/**
* dev_get_by_index_rcu - find a device by its ifindex
* @net: the applicable net namespace
* @ifindex: index of device
*
* Search for an interface by index. Returns %NULL if the device
* is not found or a pointer to the device. The device has not
* had its reference counter increased so the caller must be careful
* about locking. The caller must hold RCU lock.
*/
struct net_device *dev_get_by_index_rcu(struct net *net, int ifindex)
{
struct net_device *dev;
struct hlist_head *head = dev_index_hash(net, ifindex);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 18:06:00 -07:00
hlist_for_each_entry_rcu(dev, head, index_hlist)
if (dev->ifindex == ifindex)
return dev;
return NULL;
}
EXPORT_SYMBOL(dev_get_by_index_rcu);
/**
* dev_get_by_index - find a device by its ifindex
* @net: the applicable net namespace
* @ifindex: index of device
*
* Search for an interface by index. Returns NULL if the device
* is not found or a pointer to the device. The device returned has
* had a reference added and the pointer is safe until the user calls
* dev_put to indicate they have finished with it.
*/
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net_device *dev_get_by_index(struct net *net, int ifindex)
{
struct net_device *dev;
rcu_read_lock();
dev = dev_get_by_index_rcu(net, ifindex);
if (dev)
dev_hold(dev);
rcu_read_unlock();
return dev;
}
EXPORT_SYMBOL(dev_get_by_index);
/**
* netdev_get_name - get a netdevice name, knowing its ifindex.
* @net: network namespace
* @name: a pointer to the buffer where the name will be stored.
* @ifindex: the ifindex of the interface to get the name from.
*
* The use of raw_seqcount_begin() and cond_resched() before
* retrying is required as we want to give the writers a chance
* to complete when CONFIG_PREEMPT is not set.
*/
int netdev_get_name(struct net *net, char *name, int ifindex)
{
struct net_device *dev;
unsigned int seq;
retry:
seq = raw_seqcount_begin(&devnet_rename_seq);
rcu_read_lock();
dev = dev_get_by_index_rcu(net, ifindex);
if (!dev) {
rcu_read_unlock();
return -ENODEV;
}
strcpy(name, dev->name);
rcu_read_unlock();
if (read_seqcount_retry(&devnet_rename_seq, seq)) {
cond_resched();
goto retry;
}
return 0;
}
/**
* dev_getbyhwaddr_rcu - find a device by its hardware address
* @net: the applicable net namespace
* @type: media type of device
* @ha: hardware address
*
* Search for an interface by MAC address. Returns NULL if the device
* is not found or a pointer to the device.
* The caller must hold RCU or RTNL.
* The returned device has not had its ref count increased
* and the caller must therefore be careful about locking
*
*/
struct net_device *dev_getbyhwaddr_rcu(struct net *net, unsigned short type,
const char *ha)
{
struct net_device *dev;
for_each_netdev_rcu(net, dev)
if (dev->type == type &&
!memcmp(dev->dev_addr, ha, dev->addr_len))
return dev;
return NULL;
}
EXPORT_SYMBOL(dev_getbyhwaddr_rcu);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type)
{
struct net_device *dev;
ASSERT_RTNL();
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
for_each_netdev(net, dev)
if (dev->type == type)
return dev;
return NULL;
}
EXPORT_SYMBOL(__dev_getfirstbyhwtype);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type)
{
struct net_device *dev, *ret = NULL;
rcu_read_lock();
for_each_netdev_rcu(net, dev)
if (dev->type == type) {
dev_hold(dev);
ret = dev;
break;
}
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL(dev_getfirstbyhwtype);
/**
* __dev_get_by_flags - find any device with given flags
* @net: the applicable net namespace
* @if_flags: IFF_* values
* @mask: bitmask of bits in if_flags to check
*
* Search for any interface with the given flags. Returns NULL if a device
* is not found or a pointer to the device. Must be called inside
* rtnl_lock(), and result refcount is unchanged.
*/
struct net_device *__dev_get_by_flags(struct net *net, unsigned short if_flags,
unsigned short mask)
{
struct net_device *dev, *ret;
ASSERT_RTNL();
ret = NULL;
for_each_netdev(net, dev) {
if (((dev->flags ^ if_flags) & mask) == 0) {
ret = dev;
break;
}
}
return ret;
}
EXPORT_SYMBOL(__dev_get_by_flags);
/**
* dev_valid_name - check if name is okay for network device
* @name: name string
*
* Network device names need to be valid file names to
* to allow sysfs to work. We also disallow any kind of
* whitespace.
*/
bool dev_valid_name(const char *name)
{
if (*name == '\0')
return false;
if (strlen(name) >= IFNAMSIZ)
return false;
if (!strcmp(name, ".") || !strcmp(name, ".."))
return false;
while (*name) {
if (*name == '/' || *name == ':' || isspace(*name))
return false;
name++;
}
return true;
}
EXPORT_SYMBOL(dev_valid_name);
/**
* __dev_alloc_name - allocate a name for a device
* @net: network namespace to allocate the device name in
* @name: name format string
* @buf: scratch buffer and result name string
*
* Passed a format string - eg "lt%d" it will try and find a suitable
* id. It scans list of devices to build up a free map, then chooses
* the first empty slot. The caller must hold the dev_base or rtnl lock
* while allocating the name and adding the device in order to avoid
* duplicates.
* Limited to bits_per_byte * page size devices (ie 32K on most platforms).
* Returns the number of the unit assigned or a negative errno code.
*/
static int __dev_alloc_name(struct net *net, const char *name, char *buf)
{
int i = 0;
const char *p;
const int max_netdevices = 8*PAGE_SIZE;
unsigned long *inuse;
struct net_device *d;
p = strnchr(name, IFNAMSIZ-1, '%');
if (p) {
/*
* Verify the string as this thing may have come from
* the user. There must be either one "%d" and no other "%"
* characters.
*/
if (p[1] != 'd' || strchr(p + 2, '%'))
return -EINVAL;
/* Use one page as a bit array of possible slots */
inuse = (unsigned long *) get_zeroed_page(GFP_ATOMIC);
if (!inuse)
return -ENOMEM;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
for_each_netdev(net, d) {
if (!sscanf(d->name, name, &i))
continue;
if (i < 0 || i >= max_netdevices)
continue;
/* avoid cases where sscanf is not exact inverse of printf */
snprintf(buf, IFNAMSIZ, name, i);
if (!strncmp(buf, d->name, IFNAMSIZ))
set_bit(i, inuse);
}
i = find_first_zero_bit(inuse, max_netdevices);
free_page((unsigned long) inuse);
}
if (buf != name)
snprintf(buf, IFNAMSIZ, name, i);
if (!__dev_get_by_name(net, buf))
return i;
/* It is possible to run out of possible slots
* when the name is long and there isn't enough space left
* for the digits, or if all bits are used.
*/
return -ENFILE;
}
/**
* dev_alloc_name - allocate a name for a device
* @dev: device
* @name: name format string
*
* Passed a format string - eg "lt%d" it will try and find a suitable
* id. It scans list of devices to build up a free map, then chooses
* the first empty slot. The caller must hold the dev_base or rtnl lock
* while allocating the name and adding the device in order to avoid
* duplicates.
* Limited to bits_per_byte * page size devices (ie 32K on most platforms).
* Returns the number of the unit assigned or a negative errno code.
*/
int dev_alloc_name(struct net_device *dev, const char *name)
{
char buf[IFNAMSIZ];
struct net *net;
int ret;
BUG_ON(!dev_net(dev));
net = dev_net(dev);
ret = __dev_alloc_name(net, name, buf);
if (ret >= 0)
strlcpy(dev->name, buf, IFNAMSIZ);
return ret;
}
EXPORT_SYMBOL(dev_alloc_name);
static int dev_alloc_name_ns(struct net *net,
struct net_device *dev,
const char *name)
{
char buf[IFNAMSIZ];
int ret;
ret = __dev_alloc_name(net, name, buf);
if (ret >= 0)
strlcpy(dev->name, buf, IFNAMSIZ);
return ret;
}
static int dev_get_valid_name(struct net *net,
struct net_device *dev,
const char *name)
{
BUG_ON(!net);
if (!dev_valid_name(name))
return -EINVAL;
if (strchr(name, '%'))
return dev_alloc_name_ns(net, dev, name);
else if (__dev_get_by_name(net, name))
return -EEXIST;
else if (dev->name != name)
strlcpy(dev->name, name, IFNAMSIZ);
return 0;
}
/**
* dev_change_name - change name of a device
* @dev: device
* @newname: name (or format string) must be at least IFNAMSIZ
*
* Change name of a device, can pass format strings "eth%d".
* for wildcarding.
*/
int dev_change_name(struct net_device *dev, const char *newname)
{
unsigned char old_assign_type;
char oldname[IFNAMSIZ];
int err = 0;
int ret;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net *net;
ASSERT_RTNL();
BUG_ON(!dev_net(dev));
net = dev_net(dev);
if (dev->flags & IFF_UP)
return -EBUSY;
write_seqcount_begin(&devnet_rename_seq);
if (strncmp(newname, dev->name, IFNAMSIZ) == 0) {
write_seqcount_end(&devnet_rename_seq);
return 0;
}
memcpy(oldname, dev->name, IFNAMSIZ);
err = dev_get_valid_name(net, dev, newname);
if (err < 0) {
write_seqcount_end(&devnet_rename_seq);
return err;
}
if (oldname[0] && !strchr(oldname, '%'))
netdev_info(dev, "renamed from %s\n", oldname);
old_assign_type = dev->name_assign_type;
dev->name_assign_type = NET_NAME_RENAMED;
rollback:
ret = device_rename(&dev->dev, dev->name);
if (ret) {
memcpy(dev->name, oldname, IFNAMSIZ);
dev->name_assign_type = old_assign_type;
write_seqcount_end(&devnet_rename_seq);
return ret;
}
write_seqcount_end(&devnet_rename_seq);
netdev_adjacent_rename_links(dev, oldname);
write_lock_bh(&dev_base_lock);
hlist_del_rcu(&dev->name_hlist);
write_unlock_bh(&dev_base_lock);
synchronize_rcu();
write_lock_bh(&dev_base_lock);
hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name));
write_unlock_bh(&dev_base_lock);
ret = call_netdevice_notifiers(NETDEV_CHANGENAME, dev);
ret = notifier_to_errno(ret);
if (ret) {
/* err >= 0 after dev_alloc_name() or stores the first errno */
if (err >= 0) {
err = ret;
write_seqcount_begin(&devnet_rename_seq);
memcpy(dev->name, oldname, IFNAMSIZ);
memcpy(oldname, newname, IFNAMSIZ);
dev->name_assign_type = old_assign_type;
old_assign_type = NET_NAME_RENAMED;
goto rollback;
} else {
pr_err("%s: name change rollback failed: %d\n",
dev->name, ret);
}
}
return err;
}
/**
* dev_set_alias - change ifalias of a device
* @dev: device
* @alias: name up to IFALIASZ
* @len: limit of bytes to copy from info
*
* Set ifalias for a device,
*/
int dev_set_alias(struct net_device *dev, const char *alias, size_t len)
{
char *new_ifalias;
ASSERT_RTNL();
if (len >= IFALIASZ)
return -EINVAL;
if (!len) {
kfree(dev->ifalias);
dev->ifalias = NULL;
return 0;
}
new_ifalias = krealloc(dev->ifalias, len + 1, GFP_KERNEL);
if (!new_ifalias)
return -ENOMEM;
dev->ifalias = new_ifalias;
strlcpy(dev->ifalias, alias, len+1);
return len;
}
/**
* netdev_features_change - device changes features
* @dev: device to cause notification
*
* Called to indicate a device has changed features.
*/
void netdev_features_change(struct net_device *dev)
{
call_netdevice_notifiers(NETDEV_FEAT_CHANGE, dev);
}
EXPORT_SYMBOL(netdev_features_change);
/**
* netdev_state_change - device changes state
* @dev: device to cause notification
*
* Called to indicate a device has changed state. This function calls
* the notifier chains for netdev_chain and sends a NEWLINK message
* to the routing socket.
*/
void netdev_state_change(struct net_device *dev)
{
if (dev->flags & IFF_UP) {
struct netdev_notifier_change_info change_info;
change_info.flags_changed = 0;
call_netdevice_notifiers_info(NETDEV_CHANGE, dev,
&change_info.info);
net: fix rtnl notification in atomic context commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:02:42 -06:00
rtmsg_ifinfo(RTM_NEWLINK, dev, 0, GFP_KERNEL);
}
}
EXPORT_SYMBOL(netdev_state_change);
/**
* netdev_notify_peers - notify network peers about existence of @dev
* @dev: network device
*
* Generate traffic such that interested network peers are aware of
* @dev, such as by generating a gratuitous ARP. This may be used when
* a device wants to inform the rest of the network about some sort of
* reconfiguration such as a failover event or virtual machine
* migration.
*/
void netdev_notify_peers(struct net_device *dev)
{
rtnl_lock();
call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev);
rtnl_unlock();
}
EXPORT_SYMBOL(netdev_notify_peers);
static int __dev_open(struct net_device *dev)
{
const struct net_device_ops *ops = dev->netdev_ops;
int ret;
ASSERT_RTNL();
if (!netif_device_present(dev))
return -ENODEV;
netpoll: protect napi_poll and poll_controller during dev_[open|close] Ivan Vercera was recently backporting commit 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 to a RHEL kernel, and I noticed that, while this patch protects the tg3 driver from having its ndo_poll_controller routine called during device initalization, it does nothing for the driver during shutdown. I.e. it would be entirely possible to have the ndo_poll_controller method (or subsequently the ndo_poll) routine called for a driver in the netpoll path on CPU A while in parallel on CPU B, the ndo_close or ndo_open routine could be called. Given that the two latter routines tend to initizlize and free many data structures that the former two rely on, the result can easily be data corruption or various other crashes. Furthermore, it seems that this is potentially a problem with all net drivers that support netpoll, and so this should ideally be fixed in a common path. As Ben H Pointed out to me, we can't preform dev_open/dev_close in atomic context, so I've come up with this solution. We can use a mutex to sleep in open/close paths and just do a mutex_trylock in the napi poll path and abandon the poll attempt if we're locked, as we'll just retry the poll on the next send anyway. I've tested this here by flooding netconsole with messages on a system whos nic driver I modfied to periodically return NETDEV_TX_BUSY, so that the netpoll tx workqueue would be forced to send frames and poll the device. While this was going on I rapidly ifdown/up'ed the interface and watched for any problems. I've not found any. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ivan Vecera <ivecera@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05 01:05:43 -07:00
/* Block netpoll from trying to do any rx path servicing.
* If we don't do this there is a chance ndo_poll_controller
* or ndo_poll may be running while we open the device
*/
netpoll_poll_disable(dev);
netpoll: protect napi_poll and poll_controller during dev_[open|close] Ivan Vercera was recently backporting commit 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 to a RHEL kernel, and I noticed that, while this patch protects the tg3 driver from having its ndo_poll_controller routine called during device initalization, it does nothing for the driver during shutdown. I.e. it would be entirely possible to have the ndo_poll_controller method (or subsequently the ndo_poll) routine called for a driver in the netpoll path on CPU A while in parallel on CPU B, the ndo_close or ndo_open routine could be called. Given that the two latter routines tend to initizlize and free many data structures that the former two rely on, the result can easily be data corruption or various other crashes. Furthermore, it seems that this is potentially a problem with all net drivers that support netpoll, and so this should ideally be fixed in a common path. As Ben H Pointed out to me, we can't preform dev_open/dev_close in atomic context, so I've come up with this solution. We can use a mutex to sleep in open/close paths and just do a mutex_trylock in the napi poll path and abandon the poll attempt if we're locked, as we'll just retry the poll on the next send anyway. I've tested this here by flooding netconsole with messages on a system whos nic driver I modfied to periodically return NETDEV_TX_BUSY, so that the netpoll tx workqueue would be forced to send frames and poll the device. While this was going on I rapidly ifdown/up'ed the interface and watched for any problems. I've not found any. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ivan Vecera <ivecera@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05 01:05:43 -07:00
ret = call_netdevice_notifiers(NETDEV_PRE_UP, dev);
ret = notifier_to_errno(ret);
if (ret)
return ret;
set_bit(__LINK_STATE_START, &dev->state);
if (ops->ndo_validate_addr)
ret = ops->ndo_validate_addr(dev);
if (!ret && ops->ndo_open)
ret = ops->ndo_open(dev);
netpoll_poll_enable(dev);
netpoll: protect napi_poll and poll_controller during dev_[open|close] Ivan Vercera was recently backporting commit 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 to a RHEL kernel, and I noticed that, while this patch protects the tg3 driver from having its ndo_poll_controller routine called during device initalization, it does nothing for the driver during shutdown. I.e. it would be entirely possible to have the ndo_poll_controller method (or subsequently the ndo_poll) routine called for a driver in the netpoll path on CPU A while in parallel on CPU B, the ndo_close or ndo_open routine could be called. Given that the two latter routines tend to initizlize and free many data structures that the former two rely on, the result can easily be data corruption or various other crashes. Furthermore, it seems that this is potentially a problem with all net drivers that support netpoll, and so this should ideally be fixed in a common path. As Ben H Pointed out to me, we can't preform dev_open/dev_close in atomic context, so I've come up with this solution. We can use a mutex to sleep in open/close paths and just do a mutex_trylock in the napi poll path and abandon the poll attempt if we're locked, as we'll just retry the poll on the next send anyway. I've tested this here by flooding netconsole with messages on a system whos nic driver I modfied to periodically return NETDEV_TX_BUSY, so that the netpoll tx workqueue would be forced to send frames and poll the device. While this was going on I rapidly ifdown/up'ed the interface and watched for any problems. I've not found any. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ivan Vecera <ivecera@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05 01:05:43 -07:00
if (ret)
clear_bit(__LINK_STATE_START, &dev->state);
else {
dev->flags |= IFF_UP;
dev_set_rx_mode(dev);
dev_activate(dev);
add_device_randomness(dev->dev_addr, dev->addr_len);
}
return ret;
}
/**
* dev_open - prepare an interface for use.
* @dev: device to open
*
* Takes a device from down to up state. The device's private open
* function is invoked and then the multicast lists are loaded. Finally
* the device is moved into the up state and a %NETDEV_UP message is
* sent to the netdev notifier chain.
*
* Calling this function on an active interface is a nop. On a failure
* a negative errno code is returned.
*/
int dev_open(struct net_device *dev)
{
int ret;
if (dev->flags & IFF_UP)
return 0;
ret = __dev_open(dev);
if (ret < 0)
return ret;
net: fix rtnl notification in atomic context commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:02:42 -06:00
rtmsg_ifinfo(RTM_NEWLINK, dev, IFF_UP|IFF_RUNNING, GFP_KERNEL);
call_netdevice_notifiers(NETDEV_UP, dev);
return ret;
}
EXPORT_SYMBOL(dev_open);
static int __dev_close_many(struct list_head *head)
{
struct net_device *dev;
ASSERT_RTNL();
might_sleep();
list_for_each_entry(dev, head, close_list) {
/* Temporarily disable netpoll until the interface is down */
netpoll_poll_disable(dev);
call_netdevice_notifiers(NETDEV_GOING_DOWN, dev);
clear_bit(__LINK_STATE_START, &dev->state);
/* Synchronize to scheduled poll. We cannot touch poll list, it
* can be even on different cpu. So just clear netif_running().
*
* dev->stop() will invoke napi_disable() on all of it's
* napi_struct instances on this device.
*/
smp_mb__after_atomic(); /* Commit netif_running(). */
}
dev_deactivate_many(head);
list_for_each_entry(dev, head, close_list) {
const struct net_device_ops *ops = dev->netdev_ops;
/*
* Call the device specific close. This cannot fail.
* Only if device is UP
*
* We allow it to be called even after a DETACH hot-plug
* event.
*/
if (ops->ndo_stop)
ops->ndo_stop(dev);
dev->flags &= ~IFF_UP;
netpoll_poll_enable(dev);
}
return 0;
}
static int __dev_close(struct net_device *dev)
{
int retval;
LIST_HEAD(single);
list_add(&dev->close_list, &single);
retval = __dev_close_many(&single);
list_del(&single);
netpoll: protect napi_poll and poll_controller during dev_[open|close] Ivan Vercera was recently backporting commit 9c13cb8bb477a83b9a3c9e5a5478a4e21294a760 to a RHEL kernel, and I noticed that, while this patch protects the tg3 driver from having its ndo_poll_controller routine called during device initalization, it does nothing for the driver during shutdown. I.e. it would be entirely possible to have the ndo_poll_controller method (or subsequently the ndo_poll) routine called for a driver in the netpoll path on CPU A while in parallel on CPU B, the ndo_close or ndo_open routine could be called. Given that the two latter routines tend to initizlize and free many data structures that the former two rely on, the result can easily be data corruption or various other crashes. Furthermore, it seems that this is potentially a problem with all net drivers that support netpoll, and so this should ideally be fixed in a common path. As Ben H Pointed out to me, we can't preform dev_open/dev_close in atomic context, so I've come up with this solution. We can use a mutex to sleep in open/close paths and just do a mutex_trylock in the napi poll path and abandon the poll attempt if we're locked, as we'll just retry the poll on the next send anyway. I've tested this here by flooding netconsole with messages on a system whos nic driver I modfied to periodically return NETDEV_TX_BUSY, so that the netpoll tx workqueue would be forced to send frames and poll the device. While this was going on I rapidly ifdown/up'ed the interface and watched for any problems. I've not found any. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ivan Vecera <ivecera@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Francois Romieu <romieu@fr.zoreil.com> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05 01:05:43 -07:00
return retval;
}
int dev_close_many(struct list_head *head, bool unlink)
{
struct net_device *dev, *tmp;
/* Remove the devices that don't need to be closed */
list_for_each_entry_safe(dev, tmp, head, close_list)
if (!(dev->flags & IFF_UP))
list_del_init(&dev->close_list);
__dev_close_many(head);
list_for_each_entry_safe(dev, tmp, head, close_list) {
net: fix rtnl notification in atomic context commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:02:42 -06:00
rtmsg_ifinfo(RTM_NEWLINK, dev, IFF_UP|IFF_RUNNING, GFP_KERNEL);
call_netdevice_notifiers(NETDEV_DOWN, dev);
if (unlink)
list_del_init(&dev->close_list);
}
return 0;
}
EXPORT_SYMBOL(dev_close_many);
/**
* dev_close - shutdown an interface.
* @dev: device to shutdown
*
* This function moves an active device into down state. A
* %NETDEV_GOING_DOWN is sent to the netdev notifier chain. The device
* is then deactivated and finally a %NETDEV_DOWN is sent to the notifier
* chain.
*/
int dev_close(struct net_device *dev)
{
if (dev->flags & IFF_UP) {
LIST_HEAD(single);
list_add(&dev->close_list, &single);
dev_close_many(&single, true);
list_del(&single);
}
return 0;
}
EXPORT_SYMBOL(dev_close);
/**
* dev_disable_lro - disable Large Receive Offload on a device
* @dev: device
*
* Disable Large Receive Offload (LRO) on a net device. Must be
* called under RTNL. This is needed if received packets may be
* forwarded to another interface.
*/
void dev_disable_lro(struct net_device *dev)
{
struct net_device *lower_dev;
struct list_head *iter;
dev->wanted_features &= ~NETIF_F_LRO;
netdev_update_features(dev);
if (unlikely(dev->features & NETIF_F_LRO))
netdev_WARN(dev, "failed to disable LRO!\n");
netdev_for_each_lower_dev(dev, lower_dev, iter)
dev_disable_lro(lower_dev);
}
EXPORT_SYMBOL(dev_disable_lro);
static int call_netdevice_notifier(struct notifier_block *nb, unsigned long val,
struct net_device *dev)
{
struct netdev_notifier_info info;
netdev_notifier_info_init(&info, dev);
return nb->notifier_call(nb, val, &info);
}
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
static int dev_boot_phase = 1;
/**
* register_netdevice_notifier - register a network notifier block
* @nb: notifier
*
* Register a notifier to be called when network device events occur.
* The notifier passed is linked into the kernel structures and must
* not be reused until it has been unregistered. A negative errno code
* is returned on a failure.
*
* When registered all registration and up events are replayed
* to the new notifier to allow device to have a race free
* view of the network device list.
*/
int register_netdevice_notifier(struct notifier_block *nb)
{
struct net_device *dev;
struct net_device *last;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
struct net *net;
int err;
rtnl_lock();
err = raw_notifier_chain_register(&netdev_chain, nb);
if (err)
goto unlock;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
if (dev_boot_phase)
goto unlock;
for_each_net(net) {
for_each_netdev(net, dev) {
err = call_netdevice_notifier(nb, NETDEV_REGISTER, dev);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
err = notifier_to_errno(err);
if (err)
goto rollback;
if (!(dev->flags & IFF_UP))
continue;
call_netdevice_notifier(nb, NETDEV_UP, dev);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
}
}
unlock:
rtnl_unlock();
return err;
rollback:
last = dev;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
for_each_net(net) {
for_each_netdev(net, dev) {
if (dev == last)
goto outroll;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
if (dev->flags & IFF_UP) {
call_netdevice_notifier(nb, NETDEV_GOING_DOWN,
dev);
call_netdevice_notifier(nb, NETDEV_DOWN, dev);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
}
call_netdevice_notifier(nb, NETDEV_UNREGISTER, dev);
}
}
outroll:
raw_notifier_chain_unregister(&netdev_chain, nb);
goto unlock;
}
EXPORT_SYMBOL(register_netdevice_notifier);
/**
* unregister_netdevice_notifier - unregister a network notifier block
* @nb: notifier
*
* Unregister a notifier previously registered by
* register_netdevice_notifier(). The notifier is unlinked into the
* kernel structures and may then be reused. A negative errno code
* is returned on a failure.
*
* After unregistering unregister and down device events are synthesized
* for all devices on the device list to the removed notifier to remove
* the need for special case cleanup code.
*/
int unregister_netdevice_notifier(struct notifier_block *nb)
{
struct net_device *dev;
struct net *net;
int err;
rtnl_lock();
err = raw_notifier_chain_unregister(&netdev_chain, nb);
if (err)
goto unlock;
for_each_net(net) {
for_each_netdev(net, dev) {
if (dev->flags & IFF_UP) {
call_netdevice_notifier(nb, NETDEV_GOING_DOWN,
dev);
call_netdevice_notifier(nb, NETDEV_DOWN, dev);
}
call_netdevice_notifier(nb, NETDEV_UNREGISTER, dev);
}
}
unlock:
rtnl_unlock();
return err;
}
EXPORT_SYMBOL(unregister_netdevice_notifier);
/**
* call_netdevice_notifiers_info - call all network notifier blocks
* @val: value passed unmodified to notifier function
* @dev: net_device pointer passed unmodified to notifier function
* @info: notifier information data
*
* Call all network notifier blocks. Parameters and return value
* are as for raw_notifier_call_chain().
*/
static int call_netdevice_notifiers_info(unsigned long val,
struct net_device *dev,
struct netdev_notifier_info *info)
{
ASSERT_RTNL();
netdev_notifier_info_init(info, dev);
return raw_notifier_call_chain(&netdev_chain, val, info);
}
/**
* call_netdevice_notifiers - call all network notifier blocks
* @val: value passed unmodified to notifier function
* @dev: net_device pointer passed unmodified to notifier function
*
* Call all network notifier blocks. Parameters and return value
* are as for raw_notifier_call_chain().
*/
int call_netdevice_notifiers(unsigned long val, struct net_device *dev)
{
struct netdev_notifier_info info;
return call_netdevice_notifiers_info(val, dev, &info);
}
EXPORT_SYMBOL(call_netdevice_notifiers);
#ifdef CONFIG_NET_INGRESS
static struct static_key ingress_needed __read_mostly;
void net_inc_ingress_queue(void)
{
static_key_slow_inc(&ingress_needed);
}
EXPORT_SYMBOL_GPL(net_inc_ingress_queue);
void net_dec_ingress_queue(void)
{
static_key_slow_dec(&ingress_needed);
}
EXPORT_SYMBOL_GPL(net_dec_ingress_queue);
#endif
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:29:47 -07:00
#ifdef CONFIG_NET_EGRESS
static struct static_key egress_needed __read_mostly;
void net_inc_egress_queue(void)
{
static_key_slow_inc(&egress_needed);
}
EXPORT_SYMBOL_GPL(net_inc_egress_queue);
void net_dec_egress_queue(void)
{
static_key_slow_dec(&egress_needed);
}
EXPORT_SYMBOL_GPL(net_dec_egress_queue);
#endif
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
static struct static_key netstamp_needed __read_mostly;
net: dont call jump_label_dec from irq context Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 04:16:50 -07:00
#ifdef HAVE_JUMP_LABEL
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
/* We are not allowed to call static_key_slow_dec() from irq context
net: dont call jump_label_dec from irq context Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 04:16:50 -07:00
* If net_disable_timestamp() is called from irq context, defer the
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
* static_key_slow_dec() calls.
net: dont call jump_label_dec from irq context Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 04:16:50 -07:00
*/
static atomic_t netstamp_needed_deferred;
#endif
void net_enable_timestamp(void)
{
net: dont call jump_label_dec from irq context Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 04:16:50 -07:00
#ifdef HAVE_JUMP_LABEL
int deferred = atomic_xchg(&netstamp_needed_deferred, 0);
if (deferred) {
while (--deferred)
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
static_key_slow_dec(&netstamp_needed);
net: dont call jump_label_dec from irq context Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 04:16:50 -07:00
return;
}
#endif
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
static_key_slow_inc(&netstamp_needed);
}
EXPORT_SYMBOL(net_enable_timestamp);
void net_disable_timestamp(void)
{
net: dont call jump_label_dec from irq context Igor Maravic reported an error caused by jump_label_dec() being called from IRQ context : BUG: sleeping function called from invalid context at kernel/mutex.c:271 in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper 1 lock held by swapper/0: #0: (&n->timer){+.-...}, at: [<ffffffff8107ce90>] call_timer_fn+0x0/0x340 Pid: 0, comm: swapper Not tainted 3.2.0-rc2-net-next-mpls+ #1 Call Trace: <IRQ> [<ffffffff8104f417>] __might_sleep+0x137/0x1f0 [<ffffffff816b9a2f>] mutex_lock_nested+0x2f/0x370 [<ffffffff810a89fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff8109a37f>] ? local_clock+0x6f/0x80 [<ffffffff810a90a5>] ? lock_release_holdtime.part.22+0x15/0x1a0 [<ffffffff81557929>] ? sock_def_write_space+0x59/0x160 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff810969cd>] atomic_dec_and_mutex_lock+0x5d/0x80 [<ffffffff8112fc1d>] jump_label_dec+0x1d/0x50 [<ffffffff81566525>] net_disable_timestamp+0x15/0x20 [<ffffffff81557a75>] sock_disable_timestamp+0x45/0x50 [<ffffffff81557b00>] __sk_free+0x80/0x200 [<ffffffff815578d0>] ? sk_send_sigurg+0x70/0x70 [<ffffffff815e936e>] ? arp_error_report+0x3e/0x90 [<ffffffff81557cba>] sock_wfree+0x3a/0x70 [<ffffffff8155c2b0>] skb_release_head_state+0x70/0x120 [<ffffffff8155c0b6>] __kfree_skb+0x16/0x30 [<ffffffff8155c119>] kfree_skb+0x49/0x170 [<ffffffff815e936e>] arp_error_report+0x3e/0x90 [<ffffffff81575bd9>] neigh_invalidate+0x89/0xc0 [<ffffffff81578dbe>] neigh_timer_handler+0x9e/0x2a0 [<ffffffff81578d20>] ? neigh_update+0x640/0x640 [<ffffffff81073558>] __do_softirq+0xc8/0x3a0 Since jump_label_{inc|dec} must be called from process context only, we must defer jump_label_dec() if net_disable_timestamp() is called from interrupt context. Reported-by: Igor Maravic <igorm@etf.rs> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 04:16:50 -07:00
#ifdef HAVE_JUMP_LABEL
if (in_interrupt()) {
atomic_inc(&netstamp_needed_deferred);
return;
}
#endif
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
static_key_slow_dec(&netstamp_needed);
}
EXPORT_SYMBOL(net_disable_timestamp);
static inline void net_timestamp_set(struct sk_buff *skb)
{
skb->tstamp = 0;
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
if (static_key_false(&netstamp_needed))
__net_timestamp(skb);
}
#define net_timestamp_check(COND, SKB) \
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
if (static_key_false(&netstamp_needed)) { \
if ((COND) && !(SKB)->tstamp) \
__net_timestamp(SKB); \
} \
bool is_skb_forwardable(const struct net_device *dev, const struct sk_buff *skb)
{
unsigned int len;
if (!(dev->flags & IFF_UP))
return false;
len = dev->mtu + dev->hard_header_len + VLAN_HLEN;
if (skb->len <= len)
return true;
/* if TSO is enabled, we don't care about the length as the packet
* could be forwarded without being segmented before
*/
if (skb_is_gso(skb))
return true;
return false;
}
EXPORT_SYMBOL_GPL(is_skb_forwardable);
int __dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
{
int ret = ____dev_forward_skb(dev, skb);
if (likely(!ret)) {
skb->protocol = eth_type_trans(skb, dev);
skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN);
}
return ret;
}
EXPORT_SYMBOL_GPL(__dev_forward_skb);
/**
* dev_forward_skb - loopback an skb to another netif
*
* @dev: destination network device
* @skb: buffer to forward
*
* return values:
* NET_RX_SUCCESS (no congestion)
* NET_RX_DROP (packet was dropped, but freed)
*
* dev_forward_skb can be used for injecting an skb from the
* start_xmit function of one device into the receive queue
* of another device.
*
* The receiving device may be in another namespace, so
* we have to clear all information in the skb that could
* impact namespace isolation.
*/
int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
{
return __dev_forward_skb(dev, skb) ?: netif_rx_internal(skb);
}
EXPORT_SYMBOL_GPL(dev_forward_skb);
static inline int deliver_skb(struct sk_buff *skb,
struct packet_type *pt_prev,
struct net_device *orig_dev)
{
if (unlikely(skb_orphan_frags(skb, GFP_ATOMIC)))
return -ENOMEM;
atomic_inc(&skb->users);
return pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
}
static inline void deliver_ptype_list_skb(struct sk_buff *skb,
struct packet_type **pt,
struct net_device *orig_dev,
__be16 type,
struct list_head *ptype_list)
{
struct packet_type *ptype, *pt_prev = *pt;
list_for_each_entry_rcu(ptype, ptype_list, list) {
if (ptype->type != type)
continue;
if (pt_prev)
deliver_skb(skb, pt_prev, orig_dev);
pt_prev = ptype;
}
*pt = pt_prev;
}
static inline bool skb_loop_sk(struct packet_type *ptype, struct sk_buff *skb)
{
if (!ptype->af_packet_priv || !skb->sk)
return false;
if (ptype->id_match)
return ptype->id_match(ptype, skb->sk);
else if ((struct sock *)ptype->af_packet_priv == skb->sk)
return true;
return false;
}
/*
* Support routine. Sends outgoing frames to any network
* taps currently in use.
*/
void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
{
struct packet_type *ptype;
struct sk_buff *skb2 = NULL;
struct packet_type *pt_prev = NULL;
struct list_head *ptype_list = &ptype_all;
rcu_read_lock();
again:
list_for_each_entry_rcu(ptype, ptype_list, list) {
/* Never send packets back to the socket
* they originated from - MvS (miquels@drinkel.ow.org)
*/
if (skb_loop_sk(ptype, skb))
continue;
if (pt_prev) {
deliver_skb(skb2, pt_prev, skb->dev);
pt_prev = ptype;
continue;
}
/* need to clone skb, done only once */
skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2)
goto out_unlock;
net_timestamp_set(skb2);
/* skb->nh should be correctly
* set by sender, so that the second statement is
* just protection against buggy protocols.
*/
skb_reset_mac_header(skb2);
if (skb_network_header(skb2) < skb2->data ||
skb_network_header(skb2) > skb_tail_pointer(skb2)) {
net_crit_ratelimited("protocol %04x is buggy, dev %s\n",
ntohs(skb2->protocol),
dev->name);
skb_reset_network_header(skb2);
}
skb2->transport_header = skb2->network_header;
skb2->pkt_type = PACKET_OUTGOING;
pt_prev = ptype;
}
if (ptype_list == &ptype_all) {
ptype_list = &dev->ptype_all;
goto again;
}
out_unlock:
if (pt_prev)
pt_prev->func(skb2, skb->dev, pt_prev, skb->dev);
rcu_read_unlock();
}
EXPORT_SYMBOL_GPL(dev_queue_xmit_nit);
/**
* netif_setup_tc - Handle tc mappings on real_num_tx_queues change
net: implement mechanism for HW based QOS This patch provides a mechanism for lower layer devices to steer traffic using skb->priority to tx queues. This allows for hardware based QOS schemes to use the default qdisc without incurring the penalties related to global state and the qdisc lock. While reliably receiving skbs on the correct tx ring to avoid head of line blocking resulting from shuffling in the LLD. Finally, all the goodness from txq caching and xps/rps can still be leveraged. Many drivers and hardware exist with the ability to implement QOS schemes in the hardware but currently these drivers tend to rely on firmware to reroute specific traffic, a driver specific select_queue or the queue_mapping action in the qdisc. By using select_queue for this drivers need to be updated for each and every traffic type and we lose the goodness of much of the upstream work. Firmware solutions are inherently inflexible. And finally if admins are expected to build a qdisc and filter rules to steer traffic this requires knowledge of how the hardware is currently configured. The number of tx queues and the queue offsets may change depending on resources. Also this approach incurs all the overhead of a qdisc with filters. With the mechanism in this patch users can set skb priority using expected methods ie setsockopt() or the stack can set the priority directly. Then the skb will be steered to the correct tx queues aligned with hardware QOS traffic classes. In the normal case with single traffic class and all queues in this class everything works as is until the LLD enables multiple tcs. To steer the skb we mask out the lower 4 bits of the priority and allow the hardware to configure upto 15 distinct classes of traffic. This is expected to be sufficient for most applications at any rate it is more then the 8021Q spec designates and is equal to the number of prio bands currently implemented in the default qdisc. This in conjunction with a userspace application such as lldpad can be used to implement 8021Q transmission selection algorithms one of these algorithms being the extended transmission selection algorithm currently being used for DCB. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 01:06:04 -07:00
* @dev: Network device
* @txq: number of queues available
*
* If real_num_tx_queues is changed the tc mappings may no longer be
* valid. To resolve this verify the tc mapping remains valid and if
* not NULL the mapping. With no priorities mapping to this
* offset/count pair it will no longer be used. In the worst case TC0
* is invalid nothing can be done so disable priority mappings. If is
* expected that drivers will fix this mapping if they can before
* calling netif_set_real_num_tx_queues.
*/
static void netif_setup_tc(struct net_device *dev, unsigned int txq)
net: implement mechanism for HW based QOS This patch provides a mechanism for lower layer devices to steer traffic using skb->priority to tx queues. This allows for hardware based QOS schemes to use the default qdisc without incurring the penalties related to global state and the qdisc lock. While reliably receiving skbs on the correct tx ring to avoid head of line blocking resulting from shuffling in the LLD. Finally, all the goodness from txq caching and xps/rps can still be leveraged. Many drivers and hardware exist with the ability to implement QOS schemes in the hardware but currently these drivers tend to rely on firmware to reroute specific traffic, a driver specific select_queue or the queue_mapping action in the qdisc. By using select_queue for this drivers need to be updated for each and every traffic type and we lose the goodness of much of the upstream work. Firmware solutions are inherently inflexible. And finally if admins are expected to build a qdisc and filter rules to steer traffic this requires knowledge of how the hardware is currently configured. The number of tx queues and the queue offsets may change depending on resources. Also this approach incurs all the overhead of a qdisc with filters. With the mechanism in this patch users can set skb priority using expected methods ie setsockopt() or the stack can set the priority directly. Then the skb will be steered to the correct tx queues aligned with hardware QOS traffic classes. In the normal case with single traffic class and all queues in this class everything works as is until the LLD enables multiple tcs. To steer the skb we mask out the lower 4 bits of the priority and allow the hardware to configure upto 15 distinct classes of traffic. This is expected to be sufficient for most applications at any rate it is more then the 8021Q spec designates and is equal to the number of prio bands currently implemented in the default qdisc. This in conjunction with a userspace application such as lldpad can be used to implement 8021Q transmission selection algorithms one of these algorithms being the extended transmission selection algorithm currently being used for DCB. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 01:06:04 -07:00
{
int i;
struct netdev_tc_txq *tc = &dev->tc_to_txq[0];
/* If TC0 is invalidated disable TC mapping */
if (tc->offset + tc->count > txq) {
pr_warn("Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled!\n");
net: implement mechanism for HW based QOS This patch provides a mechanism for lower layer devices to steer traffic using skb->priority to tx queues. This allows for hardware based QOS schemes to use the default qdisc without incurring the penalties related to global state and the qdisc lock. While reliably receiving skbs on the correct tx ring to avoid head of line blocking resulting from shuffling in the LLD. Finally, all the goodness from txq caching and xps/rps can still be leveraged. Many drivers and hardware exist with the ability to implement QOS schemes in the hardware but currently these drivers tend to rely on firmware to reroute specific traffic, a driver specific select_queue or the queue_mapping action in the qdisc. By using select_queue for this drivers need to be updated for each and every traffic type and we lose the goodness of much of the upstream work. Firmware solutions are inherently inflexible. And finally if admins are expected to build a qdisc and filter rules to steer traffic this requires knowledge of how the hardware is currently configured. The number of tx queues and the queue offsets may change depending on resources. Also this approach incurs all the overhead of a qdisc with filters. With the mechanism in this patch users can set skb priority using expected methods ie setsockopt() or the stack can set the priority directly. Then the skb will be steered to the correct tx queues aligned with hardware QOS traffic classes. In the normal case with single traffic class and all queues in this class everything works as is until the LLD enables multiple tcs. To steer the skb we mask out the lower 4 bits of the priority and allow the hardware to configure upto 15 distinct classes of traffic. This is expected to be sufficient for most applications at any rate it is more then the 8021Q spec designates and is equal to the number of prio bands currently implemented in the default qdisc. This in conjunction with a userspace application such as lldpad can be used to implement 8021Q transmission selection algorithms one of these algorithms being the extended transmission selection algorithm currently being used for DCB. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 01:06:04 -07:00
dev->num_tc = 0;
return;
}
/* Invalidated prio to tc mappings set to TC0 */
for (i = 1; i < TC_BITMASK + 1; i++) {
int q = netdev_get_prio_tc_map(dev, i);
tc = &dev->tc_to_txq[q];
if (tc->offset + tc->count > txq) {
pr_warn("Number of in use tx queues changed. Priority %i to tc mapping %i is no longer valid. Setting map to 0\n",
i, q);
net: implement mechanism for HW based QOS This patch provides a mechanism for lower layer devices to steer traffic using skb->priority to tx queues. This allows for hardware based QOS schemes to use the default qdisc without incurring the penalties related to global state and the qdisc lock. While reliably receiving skbs on the correct tx ring to avoid head of line blocking resulting from shuffling in the LLD. Finally, all the goodness from txq caching and xps/rps can still be leveraged. Many drivers and hardware exist with the ability to implement QOS schemes in the hardware but currently these drivers tend to rely on firmware to reroute specific traffic, a driver specific select_queue or the queue_mapping action in the qdisc. By using select_queue for this drivers need to be updated for each and every traffic type and we lose the goodness of much of the upstream work. Firmware solutions are inherently inflexible. And finally if admins are expected to build a qdisc and filter rules to steer traffic this requires knowledge of how the hardware is currently configured. The number of tx queues and the queue offsets may change depending on resources. Also this approach incurs all the overhead of a qdisc with filters. With the mechanism in this patch users can set skb priority using expected methods ie setsockopt() or the stack can set the priority directly. Then the skb will be steered to the correct tx queues aligned with hardware QOS traffic classes. In the normal case with single traffic class and all queues in this class everything works as is until the LLD enables multiple tcs. To steer the skb we mask out the lower 4 bits of the priority and allow the hardware to configure upto 15 distinct classes of traffic. This is expected to be sufficient for most applications at any rate it is more then the 8021Q spec designates and is equal to the number of prio bands currently implemented in the default qdisc. This in conjunction with a userspace application such as lldpad can be used to implement 8021Q transmission selection algorithms one of these algorithms being the extended transmission selection algorithm currently being used for DCB. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 01:06:04 -07:00
netdev_set_prio_tc_map(dev, i, 0);
}
}
}
int netdev_txq_to_tc(struct net_device *dev, unsigned int txq)
{
if (dev->num_tc) {
struct netdev_tc_txq *tc = &dev->tc_to_txq[0];
int i;
for (i = 0; i < TC_MAX_QUEUE; i++, tc++) {
if ((txq - tc->offset) < tc->count)
return i;
}
return -1;
}
return 0;
}
#ifdef CONFIG_XPS
static DEFINE_MUTEX(xps_map_mutex);
#define xmap_dereference(P) \
rcu_dereference_protected((P), lockdep_is_held(&xps_map_mutex))
static bool remove_xps_queue(struct xps_dev_maps *dev_maps,
int tci, u16 index)
{
struct xps_map *map = NULL;
int pos;
if (dev_maps)
map = xmap_dereference(dev_maps->cpu_map[tci]);
if (!map)
return false;
for (pos = map->len; pos--;) {
if (map->queues[pos] != index)
continue;
if (map->len > 1) {
map->queues[pos] = map->queues[--map->len];
break;
}
RCU_INIT_POINTER(dev_maps->cpu_map[tci], NULL);
kfree_rcu(map, rcu);
return false;
}
return true;
}
static bool remove_xps_queue_cpu(struct net_device *dev,
struct xps_dev_maps *dev_maps,
int cpu, u16 offset, u16 count)
{
int num_tc = dev->num_tc ? : 1;
bool active = false;
int tci;
for (tci = cpu * num_tc; num_tc--; tci++) {
int i, j;
for (i = count, j = offset; i--; j++) {
if (!remove_xps_queue(dev_maps, cpu, j))
break;
}
active |= i < 0;
}
return active;
}
static void netif_reset_xps_queues(struct net_device *dev, u16 offset,
u16 count)
{
struct xps_dev_maps *dev_maps;
int cpu, i;
bool active = false;
mutex_lock(&xps_map_mutex);
dev_maps = xmap_dereference(dev->xps_maps);
if (!dev_maps)
goto out_no_maps;
for_each_possible_cpu(cpu)
active |= remove_xps_queue_cpu(dev, dev_maps, cpu,
offset, count);
if (!active) {
RCU_INIT_POINTER(dev->xps_maps, NULL);
kfree_rcu(dev_maps, rcu);
}
for (i = offset + (count - 1); count--; i--)
netdev_queue_numa_node_write(netdev_get_tx_queue(dev, i),
NUMA_NO_NODE);
out_no_maps:
mutex_unlock(&xps_map_mutex);
}
static void netif_reset_xps_queues_gt(struct net_device *dev, u16 index)
{
netif_reset_xps_queues(dev, index, dev->num_tx_queues - index);
}
static struct xps_map *expand_xps_map(struct xps_map *map,
int cpu, u16 index)
{
struct xps_map *new_map;
int alloc_len = XPS_MIN_MAP_ALLOC;
int i, pos;
for (pos = 0; map && pos < map->len; pos++) {
if (map->queues[pos] != index)
continue;
return map;
}
/* Need to add queue to this CPU's existing map */
if (map) {
if (pos < map->alloc_len)
return map;
alloc_len = map->alloc_len * 2;
}
/* Need to allocate new map to store queue on this CPU's map */
new_map = kzalloc_node(XPS_MAP_SIZE(alloc_len), GFP_KERNEL,
cpu_to_node(cpu));
if (!new_map)
return NULL;
for (i = 0; i < pos; i++)
new_map->queues[i] = map->queues[i];
new_map->alloc_len = alloc_len;
new_map->len = pos;
return new_map;
}
int netif_set_xps_queue(struct net_device *dev, const struct cpumask *mask,
u16 index)
{
struct xps_dev_maps *dev_maps, *new_dev_maps = NULL;
int i, cpu, tci, numa_node_id = -2;
int maps_sz, num_tc = 1, tc = 0;
struct xps_map *map, *new_map;
bool active = false;
if (dev->num_tc) {
num_tc = dev->num_tc;
tc = netdev_txq_to_tc(dev, index);
if (tc < 0)
return -EINVAL;
}
maps_sz = XPS_DEV_MAPS_SIZE(num_tc);
if (maps_sz < L1_CACHE_BYTES)
maps_sz = L1_CACHE_BYTES;
mutex_lock(&xps_map_mutex);
dev_maps = xmap_dereference(dev->xps_maps);
/* allocate memory for queue storage */
for_each_cpu_and(cpu, cpu_online_mask, mask) {
if (!new_dev_maps)
new_dev_maps = kzalloc(maps_sz, GFP_KERNEL);
if (!new_dev_maps) {
mutex_unlock(&xps_map_mutex);
return -ENOMEM;
}
tci = cpu * num_tc + tc;
map = dev_maps ? xmap_dereference(dev_maps->cpu_map[tci]) :
NULL;
map = expand_xps_map(map, cpu, index);
if (!map)
goto error;
RCU_INIT_POINTER(new_dev_maps->cpu_map[tci], map);
}
if (!new_dev_maps)
goto out_no_new_maps;
for_each_possible_cpu(cpu) {
/* copy maps belonging to foreign traffic classes */
for (i = tc, tci = cpu * num_tc; dev_maps && i--; tci++) {
/* fill in the new device map from the old device map */
map = xmap_dereference(dev_maps->cpu_map[tci]);
RCU_INIT_POINTER(new_dev_maps->cpu_map[tci], map);
}
/* We need to explicitly update tci as prevous loop
* could break out early if dev_maps is NULL.
*/
tci = cpu * num_tc + tc;
if (cpumask_test_cpu(cpu, mask) && cpu_online(cpu)) {
/* add queue to CPU maps */
int pos = 0;
map = xmap_dereference(new_dev_maps->cpu_map[tci]);
while ((pos < map->len) && (map->queues[pos] != index))
pos++;
if (pos == map->len)
map->queues[map->len++] = index;
#ifdef CONFIG_NUMA
if (numa_node_id == -2)
numa_node_id = cpu_to_node(cpu);
else if (numa_node_id != cpu_to_node(cpu))
numa_node_id = -1;
#endif
} else if (dev_maps) {
/* fill in the new device map from the old device map */
map = xmap_dereference(dev_maps->cpu_map[tci]);
RCU_INIT_POINTER(new_dev_maps->cpu_map[tci], map);
}
/* copy maps belonging to foreign traffic classes */
for (i = num_tc - tc, tci++; dev_maps && --i; tci++) {
/* fill in the new device map from the old device map */
map = xmap_dereference(dev_maps->cpu_map[tci]);
RCU_INIT_POINTER(new_dev_maps->cpu_map[tci], map);
}
}
rcu_assign_pointer(dev->xps_maps, new_dev_maps);
/* Cleanup old maps */
if (!dev_maps)
goto out_no_old_maps;
for_each_possible_cpu(cpu) {
for (i = num_tc, tci = cpu * num_tc; i--; tci++) {
new_map = xmap_dereference(new_dev_maps->cpu_map[tci]);
map = xmap_dereference(dev_maps->cpu_map[tci]);
if (map && map != new_map)
kfree_rcu(map, rcu);
}
}
kfree_rcu(dev_maps, rcu);
out_no_old_maps:
dev_maps = new_dev_maps;
active = true;
out_no_new_maps:
/* update Tx queue numa node */
netdev_queue_numa_node_write(netdev_get_tx_queue(dev, index),
(numa_node_id >= 0) ? numa_node_id :
NUMA_NO_NODE);
if (!dev_maps)
goto out_no_maps;
/* removes queue from unused CPUs */
for_each_possible_cpu(cpu) {
for (i = tc, tci = cpu * num_tc; i--; tci++)
active |= remove_xps_queue(dev_maps, tci, index);
if (!cpumask_test_cpu(cpu, mask) || !cpu_online(cpu))
active |= remove_xps_queue(dev_maps, tci, index);
for (i = num_tc - tc, tci++; --i; tci++)
active |= remove_xps_queue(dev_maps, tci, index);
}
/* free map if not active */
if (!active) {
RCU_INIT_POINTER(dev->xps_maps, NULL);
kfree_rcu(dev_maps, rcu);
}
out_no_maps:
mutex_unlock(&xps_map_mutex);
return 0;
error:
/* remove any maps that we added */
for_each_possible_cpu(cpu) {
for (i = num_tc, tci = cpu * num_tc; i--; tci++) {
new_map = xmap_dereference(new_dev_maps->cpu_map[tci]);
map = dev_maps ?
xmap_dereference(dev_maps->cpu_map[tci]) :
NULL;
if (new_map && new_map != map)
kfree(new_map);
}
}
mutex_unlock(&xps_map_mutex);
kfree(new_dev_maps);
return -ENOMEM;
}
EXPORT_SYMBOL(netif_set_xps_queue);
#endif
void netdev_reset_tc(struct net_device *dev)
{
#ifdef CONFIG_XPS
netif_reset_xps_queues_gt(dev, 0);
#endif
dev->num_tc = 0;
memset(dev->tc_to_txq, 0, sizeof(dev->tc_to_txq));
memset(dev->prio_tc_map, 0, sizeof(dev->prio_tc_map));
}
EXPORT_SYMBOL(netdev_reset_tc);
int netdev_set_tc_queue(struct net_device *dev, u8 tc, u16 count, u16 offset)
{
if (tc >= dev->num_tc)
return -EINVAL;
#ifdef CONFIG_XPS
netif_reset_xps_queues(dev, offset, count);
#endif
dev->tc_to_txq[tc].count = count;
dev->tc_to_txq[tc].offset = offset;
return 0;
}
EXPORT_SYMBOL(netdev_set_tc_queue);
int netdev_set_num_tc(struct net_device *dev, u8 num_tc)
{
if (num_tc > TC_MAX_QUEUE)
return -EINVAL;
#ifdef CONFIG_XPS
netif_reset_xps_queues_gt(dev, 0);
#endif
dev->num_tc = num_tc;
return 0;
}
EXPORT_SYMBOL(netdev_set_num_tc);
/*
* Routine to help set real_num_tx_queues. To avoid skbs mapped to queues
* greater then real_num_tx_queues stale skbs on the qdisc must be flushed.
*/
int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
{
xps: Transmit Packet Steering This patch implements transmit packet steering (XPS) for multiqueue devices. XPS selects a transmit queue during packet transmission based on configuration. This is done by mapping the CPU transmitting the packet to a queue. This is the transmit side analogue to RPS-- where RPS is selecting a CPU based on receive queue, XPS selects a queue based on the CPU (previously there was an XPS patch from Eric Dumazet, but that might more appropriately be called transmit completion steering). Each transmit queue can be associated with a number of CPUs which will use the queue to send packets. This is configured as a CPU mask on a per queue basis in: /sys/class/net/eth<n>/queues/tx-<n>/xps_cpus The mappings are stored per device in an inverted data structure that maps CPUs to queues. In the netdevice structure this is an array of num_possible_cpu structures where each structure holds and array of queue_indexes for queues which that CPU can use. The benefits of XPS are improved locality in the per queue data structures. Also, transmit completions are more likely to be done nearer to the sending thread, so this should promote locality back to the socket on free (e.g. UDP). The benefits of XPS are dependent on cache hierarchy, application load, and other factors. XPS would nominally be configured so that a queue would only be shared by CPUs which are sharing a cache, the degenerative configuration woud be that each CPU has it's own queue. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. bnx2x on 16 core AMD XPS (16 queues, 1 TX queue per CPU) 1234K at 100% CPU No XPS (16 queues) 996K at 100% CPU Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21 06:17:27 -07:00
int rc;
if (txq < 1 || txq > dev->num_tx_queues)
return -EINVAL;
if (dev->reg_state == NETREG_REGISTERED ||
dev->reg_state == NETREG_UNREGISTERING) {
ASSERT_RTNL();
xps: Transmit Packet Steering This patch implements transmit packet steering (XPS) for multiqueue devices. XPS selects a transmit queue during packet transmission based on configuration. This is done by mapping the CPU transmitting the packet to a queue. This is the transmit side analogue to RPS-- where RPS is selecting a CPU based on receive queue, XPS selects a queue based on the CPU (previously there was an XPS patch from Eric Dumazet, but that might more appropriately be called transmit completion steering). Each transmit queue can be associated with a number of CPUs which will use the queue to send packets. This is configured as a CPU mask on a per queue basis in: /sys/class/net/eth<n>/queues/tx-<n>/xps_cpus The mappings are stored per device in an inverted data structure that maps CPUs to queues. In the netdevice structure this is an array of num_possible_cpu structures where each structure holds and array of queue_indexes for queues which that CPU can use. The benefits of XPS are improved locality in the per queue data structures. Also, transmit completions are more likely to be done nearer to the sending thread, so this should promote locality back to the socket on free (e.g. UDP). The benefits of XPS are dependent on cache hierarchy, application load, and other factors. XPS would nominally be configured so that a queue would only be shared by CPUs which are sharing a cache, the degenerative configuration woud be that each CPU has it's own queue. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. bnx2x on 16 core AMD XPS (16 queues, 1 TX queue per CPU) 1234K at 100% CPU No XPS (16 queues) 996K at 100% CPU Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21 06:17:27 -07:00
rc = netdev_queue_update_kobjects(dev, dev->real_num_tx_queues,
txq);
if (rc)
return rc;
net: implement mechanism for HW based QOS This patch provides a mechanism for lower layer devices to steer traffic using skb->priority to tx queues. This allows for hardware based QOS schemes to use the default qdisc without incurring the penalties related to global state and the qdisc lock. While reliably receiving skbs on the correct tx ring to avoid head of line blocking resulting from shuffling in the LLD. Finally, all the goodness from txq caching and xps/rps can still be leveraged. Many drivers and hardware exist with the ability to implement QOS schemes in the hardware but currently these drivers tend to rely on firmware to reroute specific traffic, a driver specific select_queue or the queue_mapping action in the qdisc. By using select_queue for this drivers need to be updated for each and every traffic type and we lose the goodness of much of the upstream work. Firmware solutions are inherently inflexible. And finally if admins are expected to build a qdisc and filter rules to steer traffic this requires knowledge of how the hardware is currently configured. The number of tx queues and the queue offsets may change depending on resources. Also this approach incurs all the overhead of a qdisc with filters. With the mechanism in this patch users can set skb priority using expected methods ie setsockopt() or the stack can set the priority directly. Then the skb will be steered to the correct tx queues aligned with hardware QOS traffic classes. In the normal case with single traffic class and all queues in this class everything works as is until the LLD enables multiple tcs. To steer the skb we mask out the lower 4 bits of the priority and allow the hardware to configure upto 15 distinct classes of traffic. This is expected to be sufficient for most applications at any rate it is more then the 8021Q spec designates and is equal to the number of prio bands currently implemented in the default qdisc. This in conjunction with a userspace application such as lldpad can be used to implement 8021Q transmission selection algorithms one of these algorithms being the extended transmission selection algorithm currently being used for DCB. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-17 01:06:04 -07:00
if (dev->num_tc)
netif_setup_tc(dev, txq);
if (txq < dev->real_num_tx_queues) {
qdisc_reset_all_tx_gt(dev, txq);
#ifdef CONFIG_XPS
netif_reset_xps_queues_gt(dev, txq);
#endif
}
}
dev->real_num_tx_queues = txq;
return 0;
}
EXPORT_SYMBOL(netif_set_real_num_tx_queues);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
#ifdef CONFIG_SYSFS
/**
* netif_set_real_num_rx_queues - set actual number of RX queues used
* @dev: Network device
* @rxq: Actual number of RX queues
*
* This must be called either with the rtnl_lock held or before
* registration of the net device. Returns 0 on success, or a
* negative error code. If called before registration, it always
* succeeds.
*/
int netif_set_real_num_rx_queues(struct net_device *dev, unsigned int rxq)
{
int rc;
if (rxq < 1 || rxq > dev->num_rx_queues)
return -EINVAL;
if (dev->reg_state == NETREG_REGISTERED) {
ASSERT_RTNL();
rc = net_rx_queue_update_kobjects(dev, dev->real_num_rx_queues,
rxq);
if (rc)
return rc;
}
dev->real_num_rx_queues = rxq;
return 0;
}
EXPORT_SYMBOL(netif_set_real_num_rx_queues);
#endif
/**
* netif_get_num_default_rss_queues - default number of RSS queues
*
* This routine should set an upper limit on the number of RSS queues
* used by default by multiqueue devices.
*/
int netif_get_num_default_rss_queues(void)
{
return is_kdump_kernel() ?
1 : min_t(int, DEFAULT_MAX_NUM_RSS_QUEUES, num_online_cpus());
}
EXPORT_SYMBOL(netif_get_num_default_rss_queues);
static void __netif_reschedule(struct Qdisc *q)
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
{
struct softnet_data *sd;
unsigned long flags;
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
local_irq_save(flags);
sd = this_cpu_ptr(&softnet_data);
q->next_sched = NULL;
*sd->output_queue_tailp = q;
sd->output_queue_tailp = &q->next_sched;
raise_softirq_irqoff(NET_TX_SOFTIRQ);
local_irq_restore(flags);
}
void __netif_schedule(struct Qdisc *q)
{
if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state))
__netif_reschedule(q);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
}
EXPORT_SYMBOL(__netif_schedule);
struct dev_kfree_skb_cb {
enum skb_free_reason reason;
};
static struct dev_kfree_skb_cb *get_kfree_skb_cb(const struct sk_buff *skb)
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
{
return (struct dev_kfree_skb_cb *)skb->cb;
}
void netif_schedule_queue(struct netdev_queue *txq)
{
rcu_read_lock();
if (!(txq->state & QUEUE_STATE_ANY_XOFF)) {
struct Qdisc *q = rcu_dereference(txq->qdisc);
__netif_schedule(q);
}
rcu_read_unlock();
}
EXPORT_SYMBOL(netif_schedule_queue);
/**
* netif_wake_subqueue - allow sending packets on subqueue
* @dev: network device
* @queue_index: sub queue index
*
* Resume individual transmit queue of a device with multiple transmit queues.
*/
void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
{
struct netdev_queue *txq = netdev_get_tx_queue(dev, queue_index);
if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state)) {
struct Qdisc *q;
rcu_read_lock();
q = rcu_dereference(txq->qdisc);
__netif_schedule(q);
rcu_read_unlock();
}
}
EXPORT_SYMBOL(netif_wake_subqueue);
void netif_tx_wake_queue(struct netdev_queue *dev_queue)
{
if (test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &dev_queue->state)) {
struct Qdisc *q;
rcu_read_lock();
q = rcu_dereference(dev_queue->qdisc);
__netif_schedule(q);
rcu_read_unlock();
}
}
EXPORT_SYMBOL(netif_tx_wake_queue);
void __dev_kfree_skb_irq(struct sk_buff *skb, enum skb_free_reason reason)
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
{
unsigned long flags;
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
if (likely(atomic_read(&skb->users) == 1)) {
smp_rmb();
atomic_set(&skb->users, 0);
} else if (likely(!atomic_dec_and_test(&skb->users))) {
return;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
}
get_kfree_skb_cb(skb)->reason = reason;
local_irq_save(flags);
skb->next = __this_cpu_read(softnet_data.completion_queue);
__this_cpu_write(softnet_data.completion_queue, skb);
raise_softirq_irqoff(NET_TX_SOFTIRQ);
local_irq_restore(flags);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
}
EXPORT_SYMBOL(__dev_kfree_skb_irq);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
void __dev_kfree_skb_any(struct sk_buff *skb, enum skb_free_reason reason)
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
{
if (in_irq() || irqs_disabled())
__dev_kfree_skb_irq(skb, reason);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
else
dev_kfree_skb(skb);
}
EXPORT_SYMBOL(__dev_kfree_skb_any);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
/**
* netif_device_detach - mark device as removed
* @dev: network device
*
* Mark device as removed from system and therefore no longer available.
*/
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
void netif_device_detach(struct net_device *dev)
{
if (test_and_clear_bit(__LINK_STATE_PRESENT, &dev->state) &&
netif_running(dev)) {
netif_tx_stop_all_queues(dev);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
}
}
EXPORT_SYMBOL(netif_device_detach);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
/**
* netif_device_attach - mark device as attached
* @dev: network device
*
* Mark device as attached from system and restart if needed.
*/
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
void netif_device_attach(struct net_device *dev)
{
if (!test_and_set_bit(__LINK_STATE_PRESENT, &dev->state) &&
netif_running(dev)) {
netif_tx_wake_all_queues(dev);
__netdev_watchdog_up(dev);
[NET]: Deinline some larger functions from netdevice.h On a allyesconfig'ured kernel: Size Uses Wasted Name and definition ===== ==== ====== ================================================ 95 162 12075 netif_wake_queue include/linux/netdevice.h 129 86 9265 dev_kfree_skb_any include/linux/netdevice.h 127 56 5885 netif_device_attach include/linux/netdevice.h 73 86 4505 dev_kfree_skb_irq include/linux/netdevice.h 46 60 1534 netif_device_detach include/linux/netdevice.h 119 16 1485 __netif_rx_schedule include/linux/netdevice.h 143 5 492 netif_rx_schedule include/linux/netdevice.h 81 7 366 netif_schedule include/linux/netdevice.h netif_wake_queue is big because __netif_schedule is a big inline: static inline void __netif_schedule(struct net_device *dev) { if (!test_and_set_bit(__LINK_STATE_SCHED, &dev->state)) { unsigned long flags; struct softnet_data *sd; local_irq_save(flags); sd = &__get_cpu_var(softnet_data); dev->next_sched = sd->output_queue; sd->output_queue = dev; raise_softirq_irqoff(NET_TX_SOFTIRQ); local_irq_restore(flags); } } static inline void netif_wake_queue(struct net_device *dev) { #ifdef CONFIG_NETPOLL_TRAP if (netpoll_trap()) return; #endif if (test_and_clear_bit(__LINK_STATE_XOFF, &dev->state)) __netif_schedule(dev); } By de-inlining __netif_schedule we are saving a lot of text at each callsite of netif_wake_queue and netif_schedule. __netif_rx_schedule is also big, and it makes more sense to keep both of them out of line. Patch also deinlines dev_kfree_skb_any. We can deinline dev_kfree_skb_irq instead... oh well. netif_device_attach/detach are not hot paths, we can deinline them too. Signed-off-by: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-29 16:57:29 -07:00
}
}
EXPORT_SYMBOL(netif_device_attach);
/*
* Returns a Tx hash based on the given packet descriptor a Tx queues' number
* to be used as a distribution range.
*/
u16 __skb_tx_hash(const struct net_device *dev, struct sk_buff *skb,
unsigned int num_tx_queues)
{
u32 hash;
u16 qoffset = 0;
u16 qcount = num_tx_queues;
if (skb_rx_queue_recorded(skb)) {
hash = skb_get_rx_queue(skb);
while (unlikely(hash >= num_tx_queues))
hash -= num_tx_queues;
return hash;
}
if (dev->num_tc) {
u8 tc = netdev_get_prio_tc_map(dev, skb->priority);
qoffset = dev->tc_to_txq[tc].offset;
qcount = dev->tc_to_txq[tc].count;
}
return (u16) reciprocal_scale(skb_get_hash(skb), qcount) + qoffset;
}
EXPORT_SYMBOL(__skb_tx_hash);
static void skb_warn_bad_offload(const struct sk_buff *skb)
{
static const netdev_features_t null_features;
struct net_device *dev = skb->dev;
const char *name = "";
if (!net_ratelimit())
return;
if (dev) {
if (dev->dev.parent)
name = dev_driver_string(dev->dev.parent);
else
name = netdev_name(dev);
}
WARN(1, "%s: caps=(%pNF, %pNF) len=%d data_len=%d gso_size=%d "
"gso_type=%d ip_summed=%d\n",
name, dev ? &dev->features : &null_features,
skb->sk ? &skb->sk->sk_route_caps : &null_features,
skb->len, skb->data_len, skb_shinfo(skb)->gso_size,
skb_shinfo(skb)->gso_type, skb->ip_summed);
}
/*
* Invalidate hardware checksum when packet is to be mangled, and
* complete checksum manually on outgoing path.
*/
int skb_checksum_help(struct sk_buff *skb)
{
__wsum csum;
int ret = 0, offset;
if (skb->ip_summed == CHECKSUM_COMPLETE)
goto out_set_summed;
if (unlikely(skb_shinfo(skb)->gso_size)) {
skb_warn_bad_offload(skb);
return -EINVAL;
}
/* Before computing a checksum, we should make sure no frag could
* be modified by an external entity : checksum could be wrong.
*/
if (skb_has_shared_frag(skb)) {
ret = __skb_linearize(skb);
if (ret)
goto out;
}
offset = skb_checksum_start_offset(skb);
BUG_ON(offset >= skb_headlen(skb));
csum = skb_checksum(skb, offset, skb->len - offset, 0);
offset += skb->csum_offset;
BUG_ON(offset + sizeof(__sum16) > skb_headlen(skb));
if (skb_cloned(skb) &&
!skb_clone_writable(skb, offset + sizeof(__sum16))) {
ret = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
if (ret)
goto out;
}
*(__sum16 *)(skb->data + offset) = csum_fold(csum) ?: CSUM_MANGLED_0;
out_set_summed:
skb->ip_summed = CHECKSUM_NONE;
out:
return ret;
}
EXPORT_SYMBOL(skb_checksum_help);
__be16 skb_network_protocol(struct sk_buff *skb, int *depth)
{
__be16 type = skb->protocol;
/* Tunnel gso handlers can set protocol to ethernet. */
if (type == htons(ETH_P_TEB)) {
struct ethhdr *eth;
if (unlikely(!pskb_may_pull(skb, sizeof(struct ethhdr))))
return 0;
eth = (struct ethhdr *)skb_mac_header(skb);
type = eth->h_proto;
}
return __vlan_get_protocol(skb, type, depth);
}
/**
* skb_mac_gso_segment - mac layer segmentation handler.
* @skb: buffer to segment
* @features: features for the output path (see dev->features)
*/
struct sk_buff *skb_mac_gso_segment(struct sk_buff *skb,
netdev_features_t features)
{
struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT);
struct packet_offload *ptype;
int vlan_depth = skb->mac_len;
__be16 type = skb_network_protocol(skb, &vlan_depth);
if (unlikely(!type))
return ERR_PTR(-EINVAL);
__skb_pull(skb, vlan_depth);
rcu_read_lock();
list_for_each_entry_rcu(ptype, &offload_base, list) {
if (ptype->type == type && ptype->callbacks.gso_segment) {
segs = ptype->callbacks.gso_segment(skb, features);
break;
}
}
rcu_read_unlock();
__skb_push(skb, skb->data - skb_mac_header(skb));
return segs;
}
EXPORT_SYMBOL(skb_mac_gso_segment);
/* openvswitch calls this on rx path, so we need a different check.
*/
static inline bool skb_needs_check(struct sk_buff *skb, bool tx_path)
{
if (tx_path)
return skb->ip_summed != CHECKSUM_PARTIAL;
else
return skb->ip_summed == CHECKSUM_NONE;
}
/**
* __skb_gso_segment - Perform segmentation on skb.
* @skb: buffer to segment
* @features: features for the output path (see dev->features)
* @tx_path: whether it is called in TX path
*
* This function segments the given skb and returns a list of segments.
*
* It may return NULL if the skb requires no segmentation. This is
* only possible when GSO is used for verifying header integrity.
*
* Segmentation preserves SKB_SGO_CB_OFFSET bytes of previous skb cb.
*/
struct sk_buff *__skb_gso_segment(struct sk_buff *skb,
netdev_features_t features, bool tx_path)
{
if (unlikely(skb_needs_check(skb, tx_path))) {
int err;
skb_warn_bad_offload(skb);
err = skb_cow_head(skb, 0);
if (err < 0)
return ERR_PTR(err);
}
/* Only report GSO partial support if it will enable us to
* support segmentation on this frame without needing additional
* work.
*/
if (features & NETIF_F_GSO_PARTIAL) {
netdev_features_t partial_features = NETIF_F_GSO_ROBUST;
struct net_device *dev = skb->dev;
partial_features |= dev->features & dev->gso_partial_features;
if (!skb_gso_ok(skb, features | partial_features))
features &= ~NETIF_F_GSO_PARTIAL;
}
BUILD_BUG_ON(SKB_SGO_CB_OFFSET +
sizeof(*SKB_GSO_CB(skb)) > sizeof(skb->cb));
SKB_GSO_CB(skb)->mac_offset = skb_headroom(skb);
SKB_GSO_CB(skb)->encap_level = 0;
skb_reset_mac_header(skb);
skb_reset_mac_len(skb);
return skb_mac_gso_segment(skb, features);
}
EXPORT_SYMBOL(__skb_gso_segment);
/* Take action when hardware reception checksum errors are detected. */
#ifdef CONFIG_BUG
void netdev_rx_csum_fault(struct net_device *dev)
{
if (net_ratelimit()) {
pr_err("%s: hw csum failure\n", dev ? dev->name : "<unknown>");
dump_stack();
}
}
EXPORT_SYMBOL(netdev_rx_csum_fault);
#endif
/* Actually, we should eliminate this check as soon as we know, that:
* 1. IOMMU is present and allows to map all the memory.
* 2. No high memory really exists on this machine.
*/
static int illegal_highdma(struct net_device *dev, struct sk_buff *skb)
{
#ifdef CONFIG_HIGHMEM
int i;
if (!(dev->features & NETIF_F_HIGHDMA)) {
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
if (PageHighMem(skb_frag_page(frag)))
return 1;
}
}
if (PCI_DMA_BUS_IS_PHYS) {
struct device *pdev = dev->dev.parent;
if (!pdev)
return 0;
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
dma_addr_t addr = page_to_phys(skb_frag_page(frag));
if (!pdev->dma_mask || addr + PAGE_SIZE - 1 > *pdev->dma_mask)
return 1;
}
}
#endif
return 0;
}
/* If MPLS offload request, verify we are testing hardware MPLS features
* instead of standard features for the netdev.
*/
#if IS_ENABLED(CONFIG_NET_MPLS_GSO)
static netdev_features_t net_mpls_features(struct sk_buff *skb,
netdev_features_t features,
__be16 type)
{
if (eth_p_mpls(type))
features &= skb->dev->mpls_features;
return features;
}
#else
static netdev_features_t net_mpls_features(struct sk_buff *skb,
netdev_features_t features,
__be16 type)
{
return features;
}
#endif
static netdev_features_t harmonize_features(struct sk_buff *skb,
netdev_features_t features)
{
int tmp;
__be16 type;
type = skb_network_protocol(skb, &tmp);
features = net_mpls_features(skb, features, type);
net: do not disable sg for packets requiring no checksum A change in a series of VLAN-related changes appears to have inadvertently disabled the use of the scatter gather feature of network cards for transmission of non-IP ethernet protocols like ATA over Ethernet (AoE). Below is a reference to the commit that introduces a "harmonize_features" function that turns off scatter gather when the NIC does not support hardware checksumming for the ethernet protocol of an sk buff. commit f01a5236bd4b140198fbcc550f085e8361fd73fa Author: Jesse Gross <jesse@nicira.com> Date: Sun Jan 9 06:23:31 2011 +0000 net offloading: Generalize netif_get_vlan_features(). The can_checksum_protocol function is not equipped to consider a protocol that does not require checksumming. Calling it for a protocol that requires no checksum is inappropriate. The patch below has harmonize_features call can_checksum_protocol when the protocol needs a checksum, so that the network layer is not forced to perform unnecessary skb linearization on the transmission of AoE packets. Unnecessary linearization results in decreased performance and increased memory pressure, as reported here: http://www.spinics.net/lists/linux-mm/msg15184.html The problem has probably not been widely experienced yet, because only recently has the kernel.org-distributed aoe driver acquired the ability to use payloads of over a page in size, with the patchset recently included in the mm tree: https://lkml.org/lkml/2012/8/28/140 The coraid.com-distributed aoe driver already could use payloads of greater than a page in size, but its users generally do not use the newest kernels. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19 09:49:00 -06:00
if (skb->ip_summed != CHECKSUM_NONE &&
!can_checksum_protocol(features, type)) {
features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
} else if (illegal_highdma(skb->dev, skb)) {
features &= ~NETIF_F_SG;
}
return features;
}
netdev_features_t passthru_features_check(struct sk_buff *skb,
struct net_device *dev,
netdev_features_t features)
{
return features;
}
EXPORT_SYMBOL(passthru_features_check);
static netdev_features_t dflt_features_check(const struct sk_buff *skb,
struct net_device *dev,
netdev_features_t features)
{
return vlan_features_check(skb, features);
}
static netdev_features_t gso_features_check(const struct sk_buff *skb,
struct net_device *dev,
netdev_features_t features)
{
u16 gso_segs = skb_shinfo(skb)->gso_segs;
if (gso_segs > dev->gso_max_segs)
return features & ~NETIF_F_GSO_MASK;
/* Support for GSO partial features requires software
* intervention before we can actually process the packets
* so we need to strip support for any partial features now
* and we can pull them back in after we have partially
* segmented the frame.
*/
if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL))
features &= ~dev->gso_partial_features;
/* Make sure to clear the IPv4 ID mangling feature if the
* IPv4 header has the potential to be fragmented.
*/
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
struct iphdr *iph = skb->encapsulation ?
inner_ip_hdr(skb) : ip_hdr(skb);
if (!(iph->frag_off & htons(IP_DF)))
features &= ~NETIF_F_TSO_MANGLEID;
}
return features;
}
netdev_features_t netif_skb_features(struct sk_buff *skb)
{
struct net_device *dev = skb->dev;
netdev_features_t features = dev->features;
if (skb_is_gso(skb))
features = gso_features_check(skb, dev, features);
/* If encapsulation offload request, verify we are testing
* hardware encapsulation features instead of standard
* features for the netdev
*/
if (skb->encapsulation)
features &= dev->hw_enc_features;
if (skb_vlan_tagged(skb))
features = netdev_intersect_features(features,
dev->vlan_features |
NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_STAG_TX);
if (dev->netdev_ops->ndo_features_check)
features &= dev->netdev_ops->ndo_features_check(skb, dev,
features);
else
features &= dflt_features_check(skb, dev, features);
return harmonize_features(skb, features);
}
EXPORT_SYMBOL(netif_skb_features);
static int xmit_one(struct sk_buff *skb, struct net_device *dev,
struct netdev_queue *txq, bool more)
{
unsigned int len;
int rc;
if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
dev_queue_xmit_nit(skb, dev);
len = skb->len;
trace_net_dev_start_xmit(skb, dev);
rc = netdev_start_xmit(skb, dev, txq, more);
trace_net_dev_xmit(skb, rc, dev, len);
return rc;
}
struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *dev,
struct netdev_queue *txq, int *ret)
{
struct sk_buff *skb = first;
int rc = NETDEV_TX_OK;
while (skb) {
struct sk_buff *next = skb->next;
skb->next = NULL;
rc = xmit_one(skb, dev, txq, next != NULL);
if (unlikely(!dev_xmit_complete(rc))) {
skb->next = next;
goto out;
}
skb = next;
if (netif_xmit_stopped(txq) && skb) {
rc = NETDEV_TX_BUSY;
break;
}
}
out:
*ret = rc;
return skb;
}
static struct sk_buff *validate_xmit_vlan(struct sk_buff *skb,
netdev_features_t features)
{
if (skb_vlan_tag_present(skb) &&
!vlan_hw_offload_capable(features, skb->vlan_proto))
skb = __vlan_hwaccel_push_inside(skb);
return skb;
}
static struct sk_buff *validate_xmit_skb(struct sk_buff *skb, struct net_device *dev)
{
netdev_features_t features;
features = netif_skb_features(skb);
skb = validate_xmit_vlan(skb, features);
if (unlikely(!skb))
goto out_null;
if (netif_needs_gso(skb, features)) {
struct sk_buff *segs;
segs = skb_gso_segment(skb, features);
if (IS_ERR(segs)) {
goto out_kfree_skb;
} else if (segs) {
consume_skb(skb);
skb = segs;
}
} else {
if (skb_needs_linearize(skb, features) &&
__skb_linearize(skb))
goto out_kfree_skb;
/* If packet is not checksummed and device does not
* support checksumming for this protocol, complete
* checksumming here.
*/
if (skb->ip_summed == CHECKSUM_PARTIAL) {
if (skb->encapsulation)
skb_set_inner_transport_header(skb,
skb_checksum_start_offset(skb));
else
skb_set_transport_header(skb,
skb_checksum_start_offset(skb));
if (!(features & NETIF_F_CSUM_MASK) &&
skb_checksum_help(skb))
goto out_kfree_skb;
}
}
return skb;
out_kfree_skb:
kfree_skb(skb);
out_null:
atomic_long_inc(&dev->tx_dropped);
return NULL;
}
struct sk_buff *validate_xmit_skb_list(struct sk_buff *skb, struct net_device *dev)
{
struct sk_buff *next, *head = NULL, *tail;
for (; skb != NULL; skb = next) {
next = skb->next;
skb->next = NULL;
/* in case skb wont be segmented, point to itself */
skb->prev = skb;
skb = validate_xmit_skb(skb, dev);
if (!skb)
continue;
if (!head)
head = skb;
else
tail->next = skb;
/* If skb was segmented, skb->prev points to
* the last segment. If not, it still contains skb.
*/
tail = skb->prev;
}
return head;
}
packet: on direct_xmit, limit tso and csum to supported devices When transmitting on a packet socket with PACKET_VNET_HDR and PACKET_QDISC_BYPASS, validate device support for features requested in vnet_hdr. Drop TSO packets sent to devices that do not support TSO or have the feature disabled. Note that the latter currently do process those packets correctly, regardless of not advertising the feature. Because of SKB_GSO_DODGY, it is not sufficient to test device features with netif_needs_gso. Full validate_xmit_skb is needed. Switch to software checksum for non-TSO packets that request checksum offload if that device feature is unsupported or disabled. Note that similar to the TSO case, device drivers may perform checksum offload correctly even when not advertising it. When switching to software checksum, packets hit skb_checksum_help, which has two BUG_ON checksum not in linear segment. Packet sockets always allocate at least up to csum_start + csum_off + 2 as linear. Tested by running github.com/wdebruij/kerneltools/psock_txring_vnet.c ethtool -K eth0 tso off tx on psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v psock_txring_vnet -d $dst -s $src -i eth0 -l 2000 -n 1 -q -v -N ethtool -K eth0 tx off psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G psock_txring_vnet -d $dst -s $src -i eth0 -l 1000 -n 1 -q -v -G -N v2: - add EXPORT_SYMBOL_GPL(validate_xmit_skb_list) Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26 09:23:07 -06:00
EXPORT_SYMBOL_GPL(validate_xmit_skb_list);
static void qdisc_pkt_len_init(struct sk_buff *skb)
{
const struct skb_shared_info *shinfo = skb_shinfo(skb);
qdisc_skb_cb(skb)->pkt_len = skb->len;
/* To get more precise estimation of bytes sent on wire,
* we add to pkt_len the headers size of all segments
*/
if (shinfo->gso_size) {
unsigned int hdr_len;
u16 gso_segs = shinfo->gso_segs;
/* mac layer + network layer */
hdr_len = skb_transport_header(skb) - skb_mac_header(skb);
/* + transport layer */
if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))
hdr_len += tcp_hdrlen(skb);
else
hdr_len += sizeof(struct udphdr);
if (shinfo->gso_type & SKB_GSO_DODGY)
gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
shinfo->gso_size);
qdisc_skb_cb(skb)->pkt_len += (gso_segs - 1) * hdr_len;
}
}
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
struct net_device *dev,
struct netdev_queue *txq)
{
spinlock_t *root_lock = qdisc_lock(q);
struct sk_buff *to_free = NULL;
bool contended;
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
int rc;
qdisc_calculate_pkt_len(skb, q);
/*
* Heuristic to force contended enqueues to serialize on a
* separate lock before trying to get qdisc main lock.
* This permits qdisc->running owner to get the lock more
* often and dequeue packets faster.
*/
contended = qdisc_is_running(q);
if (unlikely(contended))
spin_lock(&q->busylock);
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
spin_lock(root_lock);
if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
__qdisc_drop(skb, &to_free);
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
rc = NET_XMIT_DROP;
} else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) &&
qdisc_run_begin(q)) {
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
/*
* This is a work-conserving queue; there are no old skbs
* waiting to be sent out; and the qdisc is not running -
* xmit the skb directly.
*/
qdisc_bstats_update(q, skb);
if (sch_direct_xmit(skb, q, dev, txq, root_lock, true)) {
if (unlikely(contended)) {
spin_unlock(&q->busylock);
contended = false;
}
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
__qdisc_run(q);
} else
qdisc_run_end(q);
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
rc = NET_XMIT_SUCCESS;
} else {
rc = q->enqueue(skb, q, &to_free) & NET_XMIT_MASK;
if (qdisc_run_begin(q)) {
if (unlikely(contended)) {
spin_unlock(&q->busylock);
contended = false;
}
__qdisc_run(q);
}
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
}
spin_unlock(root_lock);
if (unlikely(to_free))
kfree_skb_list(to_free);
if (unlikely(contended))
spin_unlock(&q->busylock);
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
return rc;
}
#if IS_ENABLED(CONFIG_CGROUP_NET_PRIO)
static void skb_update_prio(struct sk_buff *skb)
{
struct netprio_map *map = rcu_dereference_bh(skb->dev->priomap);
if (!skb->priority && skb->sk && map) {
unsigned int prioidx =
sock_cgroup_prioidx(&skb->sk->sk_cgrp_data);
if (prioidx < map->priomap_len)
skb->priority = map->priomap[prioidx];
}
}
#else
#define skb_update_prio(skb)
#endif
DEFINE_PER_CPU(int, xmit_recursion);
EXPORT_SYMBOL(xmit_recursion);
/**
* dev_loopback_xmit - loop back @skb
* @net: network namespace this loopback is happening in
* @sk: sk needed to be a netfilter okfn
* @skb: buffer to transmit
*/
int dev_loopback_xmit(struct net *net, struct sock *sk, struct sk_buff *skb)
{
skb_reset_mac_header(skb);
__skb_pull(skb, skb_network_offset(skb));
skb->pkt_type = PACKET_LOOPBACK;
skb->ip_summed = CHECKSUM_UNNECESSARY;
WARN_ON(!skb_dst(skb));
skb_dst_force(skb);
netif_rx_ni(skb);
return 0;
}
EXPORT_SYMBOL(dev_loopback_xmit);
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:29:47 -07:00
#ifdef CONFIG_NET_EGRESS
static struct sk_buff *
sch_handle_egress(struct sk_buff *skb, int *ret, struct net_device *dev)
{
struct tcf_proto *cl = rcu_dereference_bh(dev->egress_cl_list);
struct tcf_result cl_res;
if (!cl)
return skb;
/* skb->tc_verd and qdisc_skb_cb(skb)->pkt_len were already set
* earlier by the caller.
*/
qdisc_bstats_cpu_update(cl->q, skb);
switch (tc_classify(skb, cl, &cl_res, false)) {
case TC_ACT_OK:
case TC_ACT_RECLASSIFY:
skb->tc_index = TC_H_MIN(cl_res.classid);
break;
case TC_ACT_SHOT:
qdisc_qstats_cpu_drop(cl->q);
*ret = NET_XMIT_DROP;
kfree_skb(skb);
return NULL;
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:29:47 -07:00
case TC_ACT_STOLEN:
case TC_ACT_QUEUED:
*ret = NET_XMIT_SUCCESS;
consume_skb(skb);
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:29:47 -07:00
return NULL;
case TC_ACT_REDIRECT:
/* No need to push/pop skb's mac_header here on egress! */
skb_do_redirect(skb);
*ret = NET_XMIT_SUCCESS;
return NULL;
default:
break;
}
return skb;
}
#endif /* CONFIG_NET_EGRESS */
static inline int get_xps_queue(struct net_device *dev, struct sk_buff *skb)
{
#ifdef CONFIG_XPS
struct xps_dev_maps *dev_maps;
struct xps_map *map;
int queue_index = -1;
rcu_read_lock();
dev_maps = rcu_dereference(dev->xps_maps);
if (dev_maps) {
unsigned int tci = skb->sender_cpu - 1;
if (dev->num_tc) {
tci *= dev->num_tc;
tci += netdev_get_prio_tc_map(dev, skb->priority);
}
map = rcu_dereference(dev_maps->cpu_map[tci]);
if (map) {
if (map->len == 1)
queue_index = map->queues[0];
else
queue_index = map->queues[reciprocal_scale(skb_get_hash(skb),
map->len)];
if (unlikely(queue_index >= dev->real_num_tx_queues))
queue_index = -1;
}
}
rcu_read_unlock();
return queue_index;
#else
return -1;
#endif
}
static u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb)
{
struct sock *sk = skb->sk;
int queue_index = sk_tx_queue_get(sk);
if (queue_index < 0 || skb->ooo_okay ||
queue_index >= dev->real_num_tx_queues) {
int new_index = get_xps_queue(dev, skb);
if (new_index < 0)
new_index = skb_tx_hash(dev, skb);
if (queue_index != new_index && sk &&
sk_fullsock(sk) &&
rcu_access_pointer(sk->sk_dst_cache))
sk_tx_queue_set(sk, new_index);
queue_index = new_index;
}
return queue_index;
}
struct netdev_queue *netdev_pick_tx(struct net_device *dev,
struct sk_buff *skb,
void *accel_priv)
{
int queue_index = 0;
#ifdef CONFIG_XPS
u32 sender_cpu = skb->sender_cpu - 1;
if (sender_cpu >= (u32)NR_CPUS)
skb->sender_cpu = raw_smp_processor_id() + 1;
#endif
if (dev->real_num_tx_queues != 1) {
const struct net_device_ops *ops = dev->netdev_ops;
if (ops->ndo_select_queue)
queue_index = ops->ndo_select_queue(dev, skb, accel_priv,
__netdev_pick_tx);
else
queue_index = __netdev_pick_tx(dev, skb);
if (!accel_priv)
queue_index = netdev_cap_txqueue(dev, queue_index);
}
skb_set_queue_mapping(skb, queue_index);
return netdev_get_tx_queue(dev, queue_index);
}
/**
* __dev_queue_xmit - transmit a buffer
* @skb: buffer to transmit
* @accel_priv: private data used for L2 forwarding offload
*
* Queue a buffer for transmission to a network device. The caller must
* have set the device and priority and built the buffer before calling
* this function. The function can be called from an interrupt.
*
* A negative errno code is returned on a failure. A success does not
* guarantee the frame will be transmitted as it may be dropped due
* to congestion or traffic shaping.
*
* -----------------------------------------------------------------------------------
* I notice this method can also return errors from the queue disciplines,
* including NET_XMIT_DROP, which is a positive value. So, errors can also
* be positive.
*
* Regardless of the return value, the skb is consumed, so it is currently
* difficult to retry a send to this method. (You can bump the ref count
* before sending to hold a reference for retry if you are careful.)
*
* When calling this method, interrupts MUST be enabled. This is because
* the BH enable code must have IRQs enabled so that it will not deadlock.
* --BLG
*/
static int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
{
struct net_device *dev = skb->dev;
struct netdev_queue *txq;
struct Qdisc *q;
int rc = -ENOMEM;
skb_reset_mac_header(skb);
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
__skb_tstamp_tx(skb, NULL, skb->sk, SCM_TSTAMP_SCHED);
/* Disable soft irqs for various locks below. Also
* stops preemption for RCU.
*/
rcu_read_lock_bh();
skb_update_prio(skb);
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:29:47 -07:00
qdisc_pkt_len_init(skb);
#ifdef CONFIG_NET_CLS_ACT
skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_EGRESS);
# ifdef CONFIG_NET_EGRESS
if (static_key_false(&egress_needed)) {
skb = sch_handle_egress(skb, &rc, dev);
if (!skb)
goto out;
}
# endif
#endif
/* If device/qdisc don't need skb->dst, release it right now while
* its hot in this cpu cache.
*/
if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
skb_dst_drop(skb);
else
skb_dst_force(skb);
net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 01:18:26 -07:00
txq = netdev_pick_tx(dev, skb, accel_priv);
q = rcu_dereference_bh(txq->qdisc);
trace_net_dev_queue(skb);
if (q->enqueue) {
net: Avoid enqueuing skb for default qdiscs dev_queue_xmit enqueue's a skb and calls qdisc_run which dequeue's the skb and xmits it. In most cases, the skb that is enqueue'd is the same one that is dequeue'd (unless the queue gets stopped or multiple cpu's write to the same queue and ends in a race with qdisc_run). For default qdiscs, we can remove the redundant enqueue/dequeue and simply xmit the skb since the default qdisc is work-conserving. The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the default fast queue. The controversial part of the patch is incrementing qlen when a skb is requeued - this is to avoid checks like the second line below: + } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) && >> !q->gso_skb && + !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) { Results of a 2 hour testing for multiple netperf sessions (1, 2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are aggregate Mb/s across iterations tested with this version on System-X boxes with Chelsio 10gbps cards: ---------------------------------- Size | ORG BW NEW BW | ---------------------------------- 128K | 156964 159381 | 256K | 158650 162042 | ---------------------------------- Changes from ver1: 1. Move sch_direct_xmit declaration from sch_generic.h to pkt_sched.h 2. Update qdisc basic statistics for direct xmit path. 3. Set qlen to zero in qdisc_reset. 4. Changed some function names to more meaningful ones. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 19:44:21 -06:00
rc = __dev_xmit_skb(skb, q, dev, txq);
goto out;
}
/* The device has no queue. Common case for software devices:
loopback, all the sorts of tunnels...
[NET]: Add netif_tx_lock Various drivers use xmit_lock internally to synchronise with their transmission routines. They do so without setting xmit_lock_owner. This is fine as long as netpoll is not in use. With netpoll it is possible for deadlocks to occur if xmit_lock_owner isn't set. This is because if a printk occurs while xmit_lock is held and xmit_lock_owner is not set can cause netpoll to attempt to take xmit_lock recursively. While it is possible to resolve this by getting netpoll to use trylock, it is suboptimal because netpoll's sole objective is to maximise the chance of getting the printk out on the wire. So delaying or dropping the message is to be avoided as much as possible. So the only alternative is to always set xmit_lock_owner. The following patch does this by introducing the netif_tx_lock family of functions that take care of setting/unsetting xmit_lock_owner. I renamed xmit_lock to _xmit_lock to indicate that it should not be used directly. I didn't provide irq versions of the netif_tx_lock functions since xmit_lock is meant to be a BH-disabling lock. This is pretty much a straight text substitution except for a small bug fix in winbond. It currently uses netif_stop_queue/spin_unlock_wait to stop transmission. This is unsafe as an IRQ can potentially wake up the queue. So it is safer to use netif_tx_disable. The hamradio bits used spin_lock_irq but it is unnecessary as xmit_lock must never be taken in an IRQ handler. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09 13:20:56 -06:00
Really, it is unlikely that netif_tx_lock protection is necessary
here. (f.e. loopback and IP tunnels are clean ignoring statistics
counters.)
However, it is possible, that they rely on protection
made by us here.
Check this and shot the lock. It is not prone from deadlocks.
Either shot noqueue qdisc, it is even simpler 8)
*/
if (dev->flags & IFF_UP) {
int cpu = smp_processor_id(); /* ok because BHs are off */
if (txq->xmit_lock_owner != cpu) {
if (unlikely(__this_cpu_read(xmit_recursion) >
XMIT_RECURSION_LIMIT))
goto recursion_alert;
skb = validate_xmit_skb(skb, dev);
if (!skb)
goto out;
HARD_TX_LOCK(dev, txq, cpu);
if (!netif_xmit_stopped(txq)) {
__this_cpu_inc(xmit_recursion);
skb = dev_hard_start_xmit(skb, dev, txq, &rc);
__this_cpu_dec(xmit_recursion);
if (dev_xmit_complete(rc)) {
HARD_TX_UNLOCK(dev, txq);
goto out;
}
}
HARD_TX_UNLOCK(dev, txq);
net_crit_ratelimited("Virtual device %s asks to queue packet!\n",
dev->name);
} else {
/* Recursion is detected! It is possible,
* unfortunately
*/
recursion_alert:
net_crit_ratelimited("Dead loop on virtual device %s, fix it urgently!\n",
dev->name);
}
}
rc = -ENETDOWN;
rcu_read_unlock_bh();
atomic_long_inc(&dev->tx_dropped);
kfree_skb_list(skb);
return rc;
out:
rcu_read_unlock_bh();
return rc;
}
net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 01:18:26 -07:00
int dev_queue_xmit(struct sk_buff *skb)
net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 01:18:26 -07:00
{
return __dev_queue_xmit(skb, NULL);
}
EXPORT_SYMBOL(dev_queue_xmit);
net: core: explicitly select a txq before doing l2 forwarding Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10 01:18:26 -07:00
int dev_queue_xmit_accel(struct sk_buff *skb, void *accel_priv)
{
return __dev_queue_xmit(skb, accel_priv);
}
EXPORT_SYMBOL(dev_queue_xmit_accel);
/*=======================================================================
Receiver routines
=======================================================================*/
int netdev_max_backlog __read_mostly = 1000;
EXPORT_SYMBOL(netdev_max_backlog);
int netdev_tstamp_prequeue __read_mostly = 1;
int netdev_budget __read_mostly = 300;
int weight_p __read_mostly = 64; /* old backlog weight */
/* Called with irq disabled */
static inline void ____napi_schedule(struct softnet_data *sd,
struct napi_struct *napi)
{
list_add_tail(&napi->poll_list, &sd->poll_list);
__raise_softirq_irqoff(NET_RX_SOFTIRQ);
}
#ifdef CONFIG_RPS
/* One global table that all flow-based protocols share. */
struct rps_sock_flow_table __rcu *rps_sock_flow_table __read_mostly;
EXPORT_SYMBOL(rps_sock_flow_table);
u32 rps_cpu_mask __read_mostly;
EXPORT_SYMBOL(rps_cpu_mask);
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
struct static_key rps_needed __read_mostly;
EXPORT_SYMBOL(rps_needed);
struct static_key rfs_needed __read_mostly;
EXPORT_SYMBOL(rfs_needed);
static struct rps_dev_flow *
set_rps_cpu(struct net_device *dev, struct sk_buff *skb,
struct rps_dev_flow *rflow, u16 next_cpu)
{
if (next_cpu < nr_cpu_ids) {
#ifdef CONFIG_RFS_ACCEL
struct netdev_rx_queue *rxqueue;
struct rps_dev_flow_table *flow_table;
struct rps_dev_flow *old_rflow;
u32 flow_id;
u16 rxq_index;
int rc;
/* Should we steer this flow to a different hardware queue? */
if (!skb_rx_queue_recorded(skb) || !dev->rx_cpu_rmap ||
!(dev->features & NETIF_F_NTUPLE))
goto out;
rxq_index = cpu_rmap_lookup_index(dev->rx_cpu_rmap, next_cpu);
if (rxq_index == skb_get_rx_queue(skb))
goto out;
rxqueue = dev->_rx + rxq_index;
flow_table = rcu_dereference(rxqueue->rps_flow_table);
if (!flow_table)
goto out;
flow_id = skb_get_hash(skb) & flow_table->mask;
rc = dev->netdev_ops->ndo_rx_flow_steer(dev, skb,
rxq_index, flow_id);
if (rc < 0)
goto out;
old_rflow = rflow;
rflow = &flow_table->flows[flow_id];
rflow->filter = rc;
if (old_rflow->filter == rflow->filter)
old_rflow->filter = RPS_NO_FILTER;
out:
#endif
rflow->last_qtail =
per_cpu(softnet_data, next_cpu).input_queue_head;
}
rflow->cpu = next_cpu;
return rflow;
}
/*
* get_rps_cpu is called from netif_receive_skb and returns the target
* CPU from the RPS map of the receiving queue for a given skb.
* rcu_read_lock must be held on entry.
*/
static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb,
struct rps_dev_flow **rflowp)
{
const struct rps_sock_flow_table *sock_flow_table;
struct netdev_rx_queue *rxqueue = dev->_rx;
struct rps_dev_flow_table *flow_table;
struct rps_map *map;
int cpu = -1;
u32 tcpu;
u32 hash;
if (skb_rx_queue_recorded(skb)) {
u16 index = skb_get_rx_queue(skb);
if (unlikely(index >= dev->real_num_rx_queues)) {
WARN_ONCE(dev->real_num_rx_queues > 1,
"%s received packet on queue %u, but number "
"of RX queues is %u\n",
dev->name, index, dev->real_num_rx_queues);
goto done;
}
rxqueue += index;
}
/* Avoid computing hash if RFS/RPS is not active for this rxqueue */
flow_table = rcu_dereference(rxqueue->rps_flow_table);
map = rcu_dereference(rxqueue->rps_map);
if (!flow_table && !map)
goto done;
skb_reset_network_header(skb);
hash = skb_get_hash(skb);
if (!hash)
goto done;
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
sock_flow_table = rcu_dereference(rps_sock_flow_table);
if (flow_table && sock_flow_table) {
struct rps_dev_flow *rflow;
u32 next_cpu;
u32 ident;
/* First check into global flow table if there is a match */
ident = sock_flow_table->ents[hash & sock_flow_table->mask];
if ((ident ^ hash) & ~rps_cpu_mask)
goto try_rps;
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
next_cpu = ident & rps_cpu_mask;
/* OK, now we know there is a match,
* we can look at the local (per receive queue) flow table
*/
rflow = &flow_table->flows[hash & flow_table->mask];
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
tcpu = rflow->cpu;
/*
* If the desired CPU (where last recvmsg was done) is
* different from current CPU (one in the rx-queue flow
* table entry), switch if one of the following holds:
* - Current CPU is unset (>= nr_cpu_ids).
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
* - Current CPU is offline.
* - The current CPU's queue tail has advanced beyond the
* last packet that was enqueued using this table entry.
* This guarantees that all previous packets for the flow
* have been dequeued, thus preserving in order delivery.
*/
if (unlikely(tcpu != next_cpu) &&
(tcpu >= nr_cpu_ids || !cpu_online(tcpu) ||
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
((int)(per_cpu(softnet_data, tcpu).input_queue_head -
rflow->last_qtail)) >= 0)) {
tcpu = next_cpu;
rflow = set_rps_cpu(dev, skb, rflow, next_cpu);
}
if (tcpu < nr_cpu_ids && cpu_online(tcpu)) {
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
*rflowp = rflow;
cpu = tcpu;
goto done;
}
}
try_rps:
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
if (map) {
tcpu = map->cpus[reciprocal_scale(hash, map->len)];
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
if (cpu_online(tcpu)) {
cpu = tcpu;
goto done;
}
}
done:
return cpu;
}
#ifdef CONFIG_RFS_ACCEL
/**
* rps_may_expire_flow - check whether an RFS hardware filter may be removed
* @dev: Device on which the filter was set
* @rxq_index: RX queue index
* @flow_id: Flow ID passed to ndo_rx_flow_steer()
* @filter_id: Filter ID returned by ndo_rx_flow_steer()
*
* Drivers that implement ndo_rx_flow_steer() should periodically call
* this function for each installed filter and remove the filters for
* which it returns %true.
*/
bool rps_may_expire_flow(struct net_device *dev, u16 rxq_index,
u32 flow_id, u16 filter_id)
{
struct netdev_rx_queue *rxqueue = dev->_rx + rxq_index;
struct rps_dev_flow_table *flow_table;
struct rps_dev_flow *rflow;
bool expire = true;
unsigned int cpu;
rcu_read_lock();
flow_table = rcu_dereference(rxqueue->rps_flow_table);
if (flow_table && flow_id <= flow_table->mask) {
rflow = &flow_table->flows[flow_id];
cpu = ACCESS_ONCE(rflow->cpu);
if (rflow->filter == filter_id && cpu < nr_cpu_ids &&
((int)(per_cpu(softnet_data, cpu).input_queue_head -
rflow->last_qtail) <
(int)(10 * flow_table->mask)))
expire = false;
}
rcu_read_unlock();
return expire;
}
EXPORT_SYMBOL(rps_may_expire_flow);
#endif /* CONFIG_RFS_ACCEL */
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
/* Called from hardirq (IPI) context */
static void rps_trigger_softirq(void *data)
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
{
struct softnet_data *sd = data;
____napi_schedule(sd, &sd->backlog);
sd->received_rps++;
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
}
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
#endif /* CONFIG_RPS */
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
/*
* Check if this softnet_data structure is another cpu one
* If yes, queue it to our IPI list and return 1
* If no, return 0
*/
static int rps_ipi_queued(struct softnet_data *sd)
{
#ifdef CONFIG_RPS
struct softnet_data *mysd = this_cpu_ptr(&softnet_data);
if (sd != mysd) {
sd->rps_ipi_next = mysd->rps_ipi_list;
mysd->rps_ipi_list = sd;
__raise_softirq_irqoff(NET_RX_SOFTIRQ);
return 1;
}
#endif /* CONFIG_RPS */
return 0;
}
#ifdef CONFIG_NET_FLOW_LIMIT
int netdev_flow_limit_table_len __read_mostly = (1 << 12);
#endif
static bool skb_flow_limit(struct sk_buff *skb, unsigned int qlen)
{
#ifdef CONFIG_NET_FLOW_LIMIT
struct sd_flow_limit *fl;
struct softnet_data *sd;
unsigned int old_flow, new_flow;
if (qlen < (netdev_max_backlog >> 1))
return false;
sd = this_cpu_ptr(&softnet_data);
rcu_read_lock();
fl = rcu_dereference(sd->flow_limit);
if (fl) {
new_flow = skb_get_hash(skb) & (fl->num_buckets - 1);
old_flow = fl->history[fl->history_head];
fl->history[fl->history_head] = new_flow;
fl->history_head++;
fl->history_head &= FLOW_LIMIT_HISTORY - 1;
if (likely(fl->buckets[old_flow]))
fl->buckets[old_flow]--;
if (++fl->buckets[new_flow] > (FLOW_LIMIT_HISTORY >> 1)) {
fl->count++;
rcu_read_unlock();
return true;
}
}
rcu_read_unlock();
#endif
return false;
}
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
/*
* enqueue_to_backlog is called to queue an skb to a per CPU backlog
* queue (may be a remote CPU queue).
*/
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
static int enqueue_to_backlog(struct sk_buff *skb, int cpu,
unsigned int *qtail)
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
{
struct softnet_data *sd;
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
unsigned long flags;
unsigned int qlen;
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
sd = &per_cpu(softnet_data, cpu);
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
local_irq_save(flags);
rps_lock(sd);
net: do not process device backlog during unregistration commit 381c759d9916 ("ipv4: Avoid crashing in ip_error") fixes a problem where processed packet comes from device with destroyed inetdev (dev->ip_ptr). This is not expected because inetdev_destroy is called in NETDEV_UNREGISTER phase and packets should not be processed after dev_close_many() and synchronize_net(). Above fix is still required because inetdev_destroy can be called for other reasons. But it shows the real problem: backlog can keep packets for long time and they do not hold reference to device. Such packets are then delivered to upper levels at the same time when device is unregistered. Calling flush_backlog after NETDEV_UNREGISTER_FINAL still accounts all packets from backlog but before that some packets continue to be delivered to upper levels long after the synchronize_net call which is supposed to wait the last ones. Also, as Eric pointed out, processed packets, mostly from other devices, can continue to add new packets to backlog. Fix the problem by moving flush_backlog early, after the device driver is stopped and before the synchronize_net() call. Then use netif_running check to make sure we do not add more packets to backlog. We have to do it in enqueue_to_backlog context when the local IRQ is disabled. As result, after the flush_backlog and synchronize_net sequence all packets should be accounted. Thanks to Eric W. Biederman for the test script and his valuable feedback! Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09 00:59:09 -06:00
if (!netif_running(skb->dev))
goto drop;
qlen = skb_queue_len(&sd->input_pkt_queue);
if (qlen <= netdev_max_backlog && !skb_flow_limit(skb, qlen)) {
if (qlen) {
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
enqueue:
__skb_queue_tail(&sd->input_pkt_queue, skb);
input_queue_tail_incr_save(sd, qtail);
rps_unlock(sd);
local_irq_restore(flags);
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
return NET_RX_SUCCESS;
}
/* Schedule NAPI for backlog device
* We can use non atomic operation since we own the queue lock
*/
if (!__test_and_set_bit(NAPI_STATE_SCHED, &sd->backlog.state)) {
if (!rps_ipi_queued(sd))
____napi_schedule(sd, &sd->backlog);
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
}
goto enqueue;
}
net: do not process device backlog during unregistration commit 381c759d9916 ("ipv4: Avoid crashing in ip_error") fixes a problem where processed packet comes from device with destroyed inetdev (dev->ip_ptr). This is not expected because inetdev_destroy is called in NETDEV_UNREGISTER phase and packets should not be processed after dev_close_many() and synchronize_net(). Above fix is still required because inetdev_destroy can be called for other reasons. But it shows the real problem: backlog can keep packets for long time and they do not hold reference to device. Such packets are then delivered to upper levels at the same time when device is unregistered. Calling flush_backlog after NETDEV_UNREGISTER_FINAL still accounts all packets from backlog but before that some packets continue to be delivered to upper levels long after the synchronize_net call which is supposed to wait the last ones. Also, as Eric pointed out, processed packets, mostly from other devices, can continue to add new packets to backlog. Fix the problem by moving flush_backlog early, after the device driver is stopped and before the synchronize_net() call. Then use netif_running check to make sure we do not add more packets to backlog. We have to do it in enqueue_to_backlog context when the local IRQ is disabled. As result, after the flush_backlog and synchronize_net sequence all packets should be accounted. Thanks to Eric W. Biederman for the test script and his valuable feedback! Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Fixes: 6e583ce5242f ("net: eliminate refcounting in backlog queue") Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09 00:59:09 -06:00
drop:
sd->dropped++;
rps_unlock(sd);
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
local_irq_restore(flags);
atomic_long_inc(&skb->dev->rx_dropped);
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
kfree_skb(skb);
return NET_RX_DROP;
}
static int netif_rx_internal(struct sk_buff *skb)
{
int ret;
net_timestamp_check(netdev_tstamp_prequeue, skb);
trace_netif_rx(skb);
#ifdef CONFIG_RPS
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
if (static_key_false(&rps_needed)) {
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
struct rps_dev_flow voidflow, *rflow = &voidflow;
int cpu;
preempt_disable();
rcu_read_lock();
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
cpu = get_rps_cpu(skb->dev, skb, &rflow);
if (cpu < 0)
cpu = smp_processor_id();
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
ret = enqueue_to_backlog(skb, cpu, &rflow->last_qtail);
rcu_read_unlock();
preempt_enable();
} else
#endif
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
{
unsigned int qtail;
ret = enqueue_to_backlog(skb, get_cpu(), &qtail);
put_cpu();
}
return ret;
}
/**
* netif_rx - post buffer to the network code
* @skb: buffer to post
*
* This function receives a packet from a device driver and queues it for
* the upper (protocol) levels to process. It always succeeds. The buffer
* may be dropped during processing for congestion control or by the
* protocol layers.
*
* return values:
* NET_RX_SUCCESS (no congestion)
* NET_RX_DROP (packet was dropped)
*
*/
int netif_rx(struct sk_buff *skb)
{
trace_netif_rx_entry(skb);
return netif_rx_internal(skb);
}
EXPORT_SYMBOL(netif_rx);
int netif_rx_ni(struct sk_buff *skb)
{
int err;
trace_netif_rx_ni_entry(skb);
preempt_disable();
err = netif_rx_internal(skb);
if (local_softirq_pending())
do_softirq();
preempt_enable();
return err;
}
EXPORT_SYMBOL(netif_rx_ni);
static __latent_entropy void net_tx_action(struct softirq_action *h)
{
struct softnet_data *sd = this_cpu_ptr(&softnet_data);
if (sd->completion_queue) {
struct sk_buff *clist;
local_irq_disable();
clist = sd->completion_queue;
sd->completion_queue = NULL;
local_irq_enable();
while (clist) {
struct sk_buff *skb = clist;
clist = clist->next;
WARN_ON(atomic_read(&skb->users));
if (likely(get_kfree_skb_cb(skb)->reason == SKB_REASON_CONSUMED))
trace_consume_skb(skb);
else
trace_kfree_skb(skb, net_tx_action);
if (skb->fclone != SKB_FCLONE_UNAVAILABLE)
__kfree_skb(skb);
else
__kfree_skb_defer(skb);
}
__kfree_skb_flush();
}
if (sd->output_queue) {
struct Qdisc *head;
local_irq_disable();
head = sd->output_queue;
sd->output_queue = NULL;
sd->output_queue_tailp = &sd->output_queue;
local_irq_enable();
while (head) {
struct Qdisc *q = head;
spinlock_t *root_lock;
head = head->next_sched;
root_lock = qdisc_lock(q);
spin_lock(root_lock);
/* We need to make sure head->next_sched is read
* before clearing __QDISC_STATE_SCHED
*/
smp_mb__before_atomic();
clear_bit(__QDISC_STATE_SCHED, &q->state);
qdisc_run(q);
spin_unlock(root_lock);
}
}
}
#if IS_ENABLED(CONFIG_BRIDGE) && IS_ENABLED(CONFIG_ATM_LANE)
/* This hook is defined here for ATM LANE */
int (*br_fdb_test_addr_hook)(struct net_device *dev,
unsigned char *addr) __read_mostly;
EXPORT_SYMBOL_GPL(br_fdb_test_addr_hook);
#endif
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:29:47 -07:00
static inline struct sk_buff *
sch_handle_ingress(struct sk_buff *skb, struct packet_type **pt_prev, int *ret,
struct net_device *orig_dev)
{
#ifdef CONFIG_NET_CLS_ACT
net: sched: further simplify handle_ing Ingress qdisc has no other purpose than calling into tc_classify() that executes attached classifier(s) and action(s). It has a 1:1 relationship to dev->ingress_queue. After having commit 087c1a601ad7 ("net: sched: run ingress qdisc without locks") removed the central ingress lock, one major contention point is gone. The extra indirection layers however, are not necessary for calling into ingress qdisc. pktgen calling locally into netif_receive_skb() with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps. We can redirect the private classifier list to the netdev directly, without changing any classifier API bits (!) and execute on that from handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed, ingress qdisc doesn't have a queue and thus dev_deactivate_queue() is also not applicable, ingress_cl_list provides similar behaviour. In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc. One next possible step is the removal of the dev's ingress (dummy) netdev_queue, and to only have the list member in the netdevice itself. Note, the filter chain is RCU protected and individual filter elements are being kfree'd by sched subsystem after RCU grace period. RCU read lock is being held by __netif_receive_skb_core(). Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 14:51:32 -06:00
struct tcf_proto *cl = rcu_dereference_bh(skb->dev->ingress_cl_list);
struct tcf_result cl_res;
/* If there's at least one ingress present somewhere (so
* we get here via enabled static key), remaining devices
* that are not configured with an ingress qdisc will bail
net: sched: further simplify handle_ing Ingress qdisc has no other purpose than calling into tc_classify() that executes attached classifier(s) and action(s). It has a 1:1 relationship to dev->ingress_queue. After having commit 087c1a601ad7 ("net: sched: run ingress qdisc without locks") removed the central ingress lock, one major contention point is gone. The extra indirection layers however, are not necessary for calling into ingress qdisc. pktgen calling locally into netif_receive_skb() with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps. We can redirect the private classifier list to the netdev directly, without changing any classifier API bits (!) and execute on that from handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed, ingress qdisc doesn't have a queue and thus dev_deactivate_queue() is also not applicable, ingress_cl_list provides similar behaviour. In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc. One next possible step is the removal of the dev's ingress (dummy) netdev_queue, and to only have the list member in the netdevice itself. Note, the filter chain is RCU protected and individual filter elements are being kfree'd by sched subsystem after RCU grace period. RCU read lock is being held by __netif_receive_skb_core(). Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 14:51:32 -06:00
* out here.
*/
net: sched: further simplify handle_ing Ingress qdisc has no other purpose than calling into tc_classify() that executes attached classifier(s) and action(s). It has a 1:1 relationship to dev->ingress_queue. After having commit 087c1a601ad7 ("net: sched: run ingress qdisc without locks") removed the central ingress lock, one major contention point is gone. The extra indirection layers however, are not necessary for calling into ingress qdisc. pktgen calling locally into netif_receive_skb() with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps. We can redirect the private classifier list to the netdev directly, without changing any classifier API bits (!) and execute on that from handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed, ingress qdisc doesn't have a queue and thus dev_deactivate_queue() is also not applicable, ingress_cl_list provides similar behaviour. In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc. One next possible step is the removal of the dev's ingress (dummy) netdev_queue, and to only have the list member in the netdevice itself. Note, the filter chain is RCU protected and individual filter elements are being kfree'd by sched subsystem after RCU grace period. RCU read lock is being held by __netif_receive_skb_core(). Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 14:51:32 -06:00
if (!cl)
return skb;
if (*pt_prev) {
*ret = deliver_skb(skb, *pt_prev, orig_dev);
*pt_prev = NULL;
}
2015-05-13 16:36:28 -06:00
qdisc_skb_cb(skb)->pkt_len = skb->len;
skb->tc_verd = SET_TC_AT(skb->tc_verd, AT_INGRESS);
qdisc_bstats_cpu_update(cl->q, skb);
switch (tc_classify(skb, cl, &cl_res, false)) {
net: sched: further simplify handle_ing Ingress qdisc has no other purpose than calling into tc_classify() that executes attached classifier(s) and action(s). It has a 1:1 relationship to dev->ingress_queue. After having commit 087c1a601ad7 ("net: sched: run ingress qdisc without locks") removed the central ingress lock, one major contention point is gone. The extra indirection layers however, are not necessary for calling into ingress qdisc. pktgen calling locally into netif_receive_skb() with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps. We can redirect the private classifier list to the netdev directly, without changing any classifier API bits (!) and execute on that from handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed, ingress qdisc doesn't have a queue and thus dev_deactivate_queue() is also not applicable, ingress_cl_list provides similar behaviour. In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc. One next possible step is the removal of the dev's ingress (dummy) netdev_queue, and to only have the list member in the netdevice itself. Note, the filter chain is RCU protected and individual filter elements are being kfree'd by sched subsystem after RCU grace period. RCU read lock is being held by __netif_receive_skb_core(). Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 14:51:32 -06:00
case TC_ACT_OK:
case TC_ACT_RECLASSIFY:
skb->tc_index = TC_H_MIN(cl_res.classid);
break;
case TC_ACT_SHOT:
qdisc_qstats_cpu_drop(cl->q);
kfree_skb(skb);
return NULL;
net: sched: further simplify handle_ing Ingress qdisc has no other purpose than calling into tc_classify() that executes attached classifier(s) and action(s). It has a 1:1 relationship to dev->ingress_queue. After having commit 087c1a601ad7 ("net: sched: run ingress qdisc without locks") removed the central ingress lock, one major contention point is gone. The extra indirection layers however, are not necessary for calling into ingress qdisc. pktgen calling locally into netif_receive_skb() with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps. We can redirect the private classifier list to the netdev directly, without changing any classifier API bits (!) and execute on that from handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed, ingress qdisc doesn't have a queue and thus dev_deactivate_queue() is also not applicable, ingress_cl_list provides similar behaviour. In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc. One next possible step is the removal of the dev's ingress (dummy) netdev_queue, and to only have the list member in the netdevice itself. Note, the filter chain is RCU protected and individual filter elements are being kfree'd by sched subsystem after RCU grace period. RCU read lock is being held by __netif_receive_skb_core(). Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 14:51:32 -06:00
case TC_ACT_STOLEN:
case TC_ACT_QUEUED:
consume_skb(skb);
net: sched: further simplify handle_ing Ingress qdisc has no other purpose than calling into tc_classify() that executes attached classifier(s) and action(s). It has a 1:1 relationship to dev->ingress_queue. After having commit 087c1a601ad7 ("net: sched: run ingress qdisc without locks") removed the central ingress lock, one major contention point is gone. The extra indirection layers however, are not necessary for calling into ingress qdisc. pktgen calling locally into netif_receive_skb() with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps. We can redirect the private classifier list to the netdev directly, without changing any classifier API bits (!) and execute on that from handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed, ingress qdisc doesn't have a queue and thus dev_deactivate_queue() is also not applicable, ingress_cl_list provides similar behaviour. In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc. One next possible step is the removal of the dev's ingress (dummy) netdev_queue, and to only have the list member in the netdevice itself. Note, the filter chain is RCU protected and individual filter elements are being kfree'd by sched subsystem after RCU grace period. RCU read lock is being held by __netif_receive_skb_core(). Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 14:51:32 -06:00
return NULL;
2015-09-16 00:05:43 -06:00
case TC_ACT_REDIRECT:
/* skb_mac_header check was done by cls/act_bpf, so
* we can safely push the L2 header back before
* redirecting to another netdev
*/
__skb_push(skb, skb->mac_len);
skb_do_redirect(skb);
return NULL;
net: sched: further simplify handle_ing Ingress qdisc has no other purpose than calling into tc_classify() that executes attached classifier(s) and action(s). It has a 1:1 relationship to dev->ingress_queue. After having commit 087c1a601ad7 ("net: sched: run ingress qdisc without locks") removed the central ingress lock, one major contention point is gone. The extra indirection layers however, are not necessary for calling into ingress qdisc. pktgen calling locally into netif_receive_skb() with a dummy u32, single CPU result on a Supermicro X10SLM-F, Xeon E3-1240: before ~21,1 Mpps, after patch ~22,9 Mpps. We can redirect the private classifier list to the netdev directly, without changing any classifier API bits (!) and execute on that from handle_ing() side. The __QDISC_STATE_DEACTIVATE test can be removed, ingress qdisc doesn't have a queue and thus dev_deactivate_queue() is also not applicable, ingress_cl_list provides similar behaviour. In other words, ingress qdisc acts like TCQ_F_BUILTIN qdisc. One next possible step is the removal of the dev's ingress (dummy) netdev_queue, and to only have the list member in the netdevice itself. Note, the filter chain is RCU protected and individual filter elements are being kfree'd by sched subsystem after RCU grace period. RCU read lock is being held by __netif_receive_skb_core(). Joint work with Alexei Starovoitov. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 14:51:32 -06:00
default:
break;
}
#endif /* CONFIG_NET_CLS_ACT */
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
return skb;
}
/**
* netdev_is_rx_handler_busy - check if receive handler is registered
* @dev: device to check
*
* Check if a receive handler is already registered for a given device.
* Return true if there one.
*
* The caller must hold the rtnl_mutex.
*/
bool netdev_is_rx_handler_busy(struct net_device *dev)
{
ASSERT_RTNL();
return dev && rtnl_dereference(dev->rx_handler);
}
EXPORT_SYMBOL_GPL(netdev_is_rx_handler_busy);
/**
* netdev_rx_handler_register - register receive handler
* @dev: device to register a handler for
* @rx_handler: receive handler to register
* @rx_handler_data: data pointer that is used by rx handler
*
* Register a receive handler for a device. This handler will then be
* called from __netif_receive_skb. A negative errno code is returned
* on a failure.
*
* The caller must hold the rtnl_mutex.
*
* For a general description of rx_handler, see enum rx_handler_result.
*/
int netdev_rx_handler_register(struct net_device *dev,
rx_handler_func_t *rx_handler,
void *rx_handler_data)
{
ASSERT_RTNL();
if (dev->rx_handler)
return -EBUSY;
net: add a synchronize_net() in netdev_rx_handler_unregister() commit 35d48903e97819 (bonding: fix rx_handler locking) added a race in bonding driver, reported by Steven Rostedt who did a very good diagnosis : <quoting Steven> I'm currently debugging a crash in an old 3.0-rt kernel that one of our customers is seeing. The bug happens with a stress test that loads and unloads the bonding module in a loop (I don't know all the details as I'm not the one that is directly interacting with the customer). But the bug looks to be something that may still be present and possibly present in mainline too. It will just be much harder to trigger it in mainline. In -rt, interrupts are threads, and can schedule in and out just like any other thread. Note, mainline now supports interrupt threads so this may be easily reproducible in mainline as well. I don't have the ability to tell the customer to try mainline or other kernels, so my hands are somewhat tied to what I can do. But according to a core dump, I tracked down that the eth irq thread crashed in bond_handle_frame() here: slave = bond_slave_get_rcu(skb->dev); bond = slave->bond; <--- BUG the slave returned was NULL and accessing slave->bond caused a NULL pointer dereference. Looking at the code that unregisters the handler: void netdev_rx_handler_unregister(struct net_device *dev) { ASSERT_RTNL(); RCU_INIT_POINTER(dev->rx_handler, NULL); RCU_INIT_POINTER(dev->rx_handler_data, NULL); } Which is basically: dev->rx_handler = NULL; dev->rx_handler_data = NULL; And looking at __netif_receive_skb() we have: rx_handler = rcu_dereference(skb->dev->rx_handler); if (rx_handler) { if (pt_prev) { ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = NULL; } switch (rx_handler(&skb)) { My question to all of you is, what stops this interrupt from happening while the bonding module is unloading? What happens if the interrupt triggers and we have this: CPU0 CPU1 ---- ---- rx_handler = skb->dev->rx_handler netdev_rx_handler_unregister() { dev->rx_handler = NULL; dev->rx_handler_data = NULL; rx_handler() bond_handle_frame() { slave = skb->dev->rx_handler; bond = slave->bond; <-- NULL pointer dereference!!! What protection am I missing in the bond release handler that would prevent the above from happening? </quoting Steven> We can fix bug this in two ways. First is adding a test in bond_handle_frame() and others to check if rx_handler_data is NULL. A second way is adding a synchronize_net() in netdev_rx_handler_unregister() to make sure that a rcu protected reader has the guarantee to see a non NULL rx_handler_data. The second way is better as it avoids an extra test in fast path. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Paul E. McKenney <paulmck@us.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 21:01:22 -06:00
/* Note: rx_handler_data must be set before rx_handler */
rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
rcu_assign_pointer(dev->rx_handler, rx_handler);
return 0;
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_register);
/**
* netdev_rx_handler_unregister - unregister receive handler
* @dev: device to unregister a handler from
*
* Unregister a receive handler from a device.
*
* The caller must hold the rtnl_mutex.
*/
void netdev_rx_handler_unregister(struct net_device *dev)
{
ASSERT_RTNL();
RCU_INIT_POINTER(dev->rx_handler, NULL);
net: add a synchronize_net() in netdev_rx_handler_unregister() commit 35d48903e97819 (bonding: fix rx_handler locking) added a race in bonding driver, reported by Steven Rostedt who did a very good diagnosis : <quoting Steven> I'm currently debugging a crash in an old 3.0-rt kernel that one of our customers is seeing. The bug happens with a stress test that loads and unloads the bonding module in a loop (I don't know all the details as I'm not the one that is directly interacting with the customer). But the bug looks to be something that may still be present and possibly present in mainline too. It will just be much harder to trigger it in mainline. In -rt, interrupts are threads, and can schedule in and out just like any other thread. Note, mainline now supports interrupt threads so this may be easily reproducible in mainline as well. I don't have the ability to tell the customer to try mainline or other kernels, so my hands are somewhat tied to what I can do. But according to a core dump, I tracked down that the eth irq thread crashed in bond_handle_frame() here: slave = bond_slave_get_rcu(skb->dev); bond = slave->bond; <--- BUG the slave returned was NULL and accessing slave->bond caused a NULL pointer dereference. Looking at the code that unregisters the handler: void netdev_rx_handler_unregister(struct net_device *dev) { ASSERT_RTNL(); RCU_INIT_POINTER(dev->rx_handler, NULL); RCU_INIT_POINTER(dev->rx_handler_data, NULL); } Which is basically: dev->rx_handler = NULL; dev->rx_handler_data = NULL; And looking at __netif_receive_skb() we have: rx_handler = rcu_dereference(skb->dev->rx_handler); if (rx_handler) { if (pt_prev) { ret = deliver_skb(skb, pt_prev, orig_dev); pt_prev = NULL; } switch (rx_handler(&skb)) { My question to all of you is, what stops this interrupt from happening while the bonding module is unloading? What happens if the interrupt triggers and we have this: CPU0 CPU1 ---- ---- rx_handler = skb->dev->rx_handler netdev_rx_handler_unregister() { dev->rx_handler = NULL; dev->rx_handler_data = NULL; rx_handler() bond_handle_frame() { slave = skb->dev->rx_handler; bond = slave->bond; <-- NULL pointer dereference!!! What protection am I missing in the bond release handler that would prevent the above from happening? </quoting Steven> We can fix bug this in two ways. First is adding a test in bond_handle_frame() and others to check if rx_handler_data is NULL. A second way is adding a synchronize_net() in netdev_rx_handler_unregister() to make sure that a rcu protected reader has the guarantee to see a non NULL rx_handler_data. The second way is better as it avoids an extra test in fast path. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Paul E. McKenney <paulmck@us.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 21:01:22 -06:00
/* a reader seeing a non NULL rx_handler in a rcu_read_lock()
* section has a guarantee to see a non NULL rx_handler_data
* as well.
*/
synchronize_net();
RCU_INIT_POINTER(dev->rx_handler_data, NULL);
}
EXPORT_SYMBOL_GPL(netdev_rx_handler_unregister);
/*
* Limit the use of PFMEMALLOC reserves to those protocols that implement
* the special handling of PFMEMALLOC skbs.
*/
static bool skb_pfmemalloc_protocol(struct sk_buff *skb)
{
switch (skb->protocol) {
case htons(ETH_P_ARP):
case htons(ETH_P_IP):
case htons(ETH_P_IPV6):
case htons(ETH_P_8021Q):
case htons(ETH_P_8021AD):
return true;
default:
return false;
}
}
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
static inline int nf_ingress(struct sk_buff *skb, struct packet_type **pt_prev,
int *ret, struct net_device *orig_dev)
{
#ifdef CONFIG_NETFILTER_INGRESS
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
if (nf_hook_ingress_active(skb)) {
int ingress_retval;
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
if (*pt_prev) {
*ret = deliver_skb(skb, *pt_prev, orig_dev);
*pt_prev = NULL;
}
rcu_read_lock();
ingress_retval = nf_hook_ingress(skb);
rcu_read_unlock();
return ingress_retval;
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
}
#endif /* CONFIG_NETFILTER_INGRESS */
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
return 0;
}
static int __netif_receive_skb_core(struct sk_buff *skb, bool pfmemalloc)
{
struct packet_type *ptype, *pt_prev;
rx_handler_func_t *rx_handler;
struct net_device *orig_dev;
bool deliver_exact = false;
int ret = NET_RX_DROP;
__be16 type;
net_timestamp_check(!netdev_tstamp_prequeue, skb);
trace_netif_receive_skb(skb);
orig_dev = skb->dev;
skb_reset_network_header(skb);
if (!skb_transport_header_was_set(skb))
skb_reset_transport_header(skb);
skb_reset_mac_len(skb);
pt_prev = NULL;
another_round:
skb->skb_iif = skb->dev->ifindex;
__this_cpu_inc(softnet_data.processed);
if (skb->protocol == cpu_to_be16(ETH_P_8021Q) ||
skb->protocol == cpu_to_be16(ETH_P_8021AD)) {
net: Always untag vlan-tagged traffic on input. Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy <kaber@trash.net> CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-08 12:42:13 -06:00
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
#ifdef CONFIG_NET_CLS_ACT
if (skb->tc_verd & TC_NCLS) {
skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
goto ncls;
}
#endif
if (pfmemalloc)
goto skip_taps;
list_for_each_entry_rcu(ptype, &ptype_all, list) {
if (pt_prev)
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = ptype;
}
list_for_each_entry_rcu(ptype, &skb->dev->ptype_all, list) {
if (pt_prev)
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = ptype;
}
skip_taps:
#ifdef CONFIG_NET_INGRESS
if (static_key_false(&ingress_needed)) {
net, sched: add clsact qdisc This work adds a generalization of the ingress qdisc as a qdisc holding only classifiers. The clsact qdisc works on ingress, but also on egress. In both cases, it's execution happens without taking the qdisc lock, and the main difference for the egress part compared to prior version of [1] is that this can be applied with _any_ underlying real egress qdisc (also classless ones). Besides solving the use-case of [1], that is, allowing for more programmability on assigning skb->priority for the mqprio case that is supported by most popular 10G+ NICs, it also opens up a lot more flexibility for other tc applications. The main work on classification can already be done at clsact egress time if the use-case allows and state stored for later retrieval f.e. again in skb->priority with major/minors (which is checked by most classful qdiscs before consulting tc_classify()) and/or in other skb fields like skb->tc_index for some light-weight post-processing to get to the eventual classid in case of a classful qdisc. Another use case is that the clsact egress part allows to have a central egress counterpart to the ingress classifiers, so that classifiers can easily share state (e.g. in cls_bpf via eBPF maps) for ingress and egress. Currently, default setups like mq + pfifo_fast would require for this to use, for example, prio qdisc instead (to get a tc_classify() run) and to duplicate the egress classifier for each queue. With clsact, it allows for leaving the setup as is, it can additionally assign skb->priority to put the skb in one of pfifo_fast's bands and it can share state with maps. Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid) w/o the need to perform a skb_dst_force() to hold on to it any longer. In lwt case, we can also use this facility to setup dst metadata via cls_bpf (bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for that (case of IFF_NO_QUEUE devices, for example). The realization can be done without any changes to the scheduler core framework. All it takes is that we have two a-priori defined minors/child classes, where we can mux between ingress and egress classifier list (dev->ingress_cl_list and dev->egress_cl_list, latter stored close to dev->_tx to avoid extra cacheline miss for moderate loads). The egress part is a bit similar modelled to handle_ing() and patched to a noop in case the functionality is not used. Both handlers are now called sch_handle_ingress() and sch_handle_egress(), code sharing among the two doesn't seem practical as there are various minor differences in both paths, so that making them conditional in a single handler would rather slow things down. Full compatibility to ingress qdisc is provided as well. Since both piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist per netdevice, and thus ingress qdisc specific behaviour can be retained for user space. This means, either a user does 'tc qdisc add dev foo ingress' and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact' alternative, where both, ingress and egress classifier can be configured as in the below example. ingress qdisc supports attaching classifier to any minor number whereas clsact has two fixed minors for muxing between the lists, therefore to not break user space setups, they are better done as two separate qdiscs. I decided to extend the sch_ingress module with clsact functionality so that commonly used code can be reused, the module is being aliased with sch_clsact so that it can be auto-loaded properly. Alternative would have been to add a flag when initializing ingress to alter its behaviour plus aliasing to a different name (as it's more than just ingress). However, the first would end up, based on the flag, choosing the new/old behaviour by calling different function implementations to handle each anyway, the latter would require to register ingress qdisc once again under different alias. So, this really begs to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops by its own that share callbacks used by both. Example, adding qdisc: # tc qdisc add dev foo clsact # tc qdisc show dev foo qdisc mq 0: root qdisc pfifo_fast 0: parent :1 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :2 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :3 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc pfifo_fast 0: parent :4 bands 3 priomap 1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1 qdisc clsact ffff: parent ffff:fff1 Adding filters (deleting, etc works analogous by specifying ingress/egress): # tc filter add dev foo ingress bpf da obj bar.o sec ingress # tc filter add dev foo egress bpf da obj bar.o sec egress # tc filter show dev foo ingress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action # tc filter show dev foo egress filter protocol all pref 49152 bpf filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will show an empty list for clsact. Either using the parent names (ingress/egress) or specifying the full major/minor will then show the related filter lists. Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend. [1] http://patchwork.ozlabs.org/patch/512949/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07 14:29:47 -07:00
skb = sch_handle_ingress(skb, &pt_prev, &ret, orig_dev);
if (!skb)
goto out;
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
if (nf_ingress(skb, &pt_prev, &ret, orig_dev) < 0)
goto out;
}
#endif
#ifdef CONFIG_NET_CLS_ACT
skb->tc_verd = 0;
ncls:
#endif
if (pfmemalloc && !skb_pfmemalloc_protocol(skb))
goto drop;
if (skb_vlan_tag_present(skb)) {
net: allow vlan traffic to be received under bond The following configuration used to work as I expected. At least we could use the fcoe interfaces to do MPIO and the bond0 iface to do load balancing or failover. ---eth2.228-fcoe | eth2 -----| | |---- bond0 | eth3 -----| | ---eth3.228-fcoe This worked because of a change we added to allow inactive slaves to rx 'exact' matches. This functionality was kept intact with the rx_handler mechanism. However now the vlan interface attached to the active slave never receives traffic because the bonding rx_handler updates the skb->dev and goto's another_round. Previously, the vlan_do_receive() logic was called before the bonding rx_handler. Now by the time vlan_do_receive calls vlan_find_dev() the skb->dev is set to bond0 and it is clear no vlan is attached to this iface. The vlan lookup fails. This patch moves the VLAN check above the rx_handler. A VLAN tagged frame is now routed to the eth2.228-fcoe iface in the above schematic. Untagged frames continue to the bond0 as normal. This case also remains intact, eth2 --> bond0 --> vlan.228 Here the skb is VLAN tagged but the vlan lookup fails on eth2 causing the bonding rx_handler to be called. On the second pass the vlan lookup is on the bond0 iface and completes as expected. Putting a VLAN.228 on both the bond0 and eth2 device will result in eth2.228 receiving the skb. I don't think this is completely unexpected and was the result prior to the rx_handler result. Note, the same setup is also used for other storage traffic that MPIO is used with eg. iSCSI and similar setups can be contrived without storage protocols. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10 03:16:41 -06:00
if (pt_prev) {
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = NULL;
}
if (vlan_do_receive(&skb))
net: allow vlan traffic to be received under bond The following configuration used to work as I expected. At least we could use the fcoe interfaces to do MPIO and the bond0 iface to do load balancing or failover. ---eth2.228-fcoe | eth2 -----| | |---- bond0 | eth3 -----| | ---eth3.228-fcoe This worked because of a change we added to allow inactive slaves to rx 'exact' matches. This functionality was kept intact with the rx_handler mechanism. However now the vlan interface attached to the active slave never receives traffic because the bonding rx_handler updates the skb->dev and goto's another_round. Previously, the vlan_do_receive() logic was called before the bonding rx_handler. Now by the time vlan_do_receive calls vlan_find_dev() the skb->dev is set to bond0 and it is clear no vlan is attached to this iface. The vlan lookup fails. This patch moves the VLAN check above the rx_handler. A VLAN tagged frame is now routed to the eth2.228-fcoe iface in the above schematic. Untagged frames continue to the bond0 as normal. This case also remains intact, eth2 --> bond0 --> vlan.228 Here the skb is VLAN tagged but the vlan lookup fails on eth2 causing the bonding rx_handler to be called. On the second pass the vlan lookup is on the bond0 iface and completes as expected. Putting a VLAN.228 on both the bond0 and eth2 device will result in eth2.228 receiving the skb. I don't think this is completely unexpected and was the result prior to the rx_handler result. Note, the same setup is also used for other storage traffic that MPIO is used with eg. iSCSI and similar setups can be contrived without storage protocols. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10 03:16:41 -06:00
goto another_round;
else if (unlikely(!skb))
goto out;
net: allow vlan traffic to be received under bond The following configuration used to work as I expected. At least we could use the fcoe interfaces to do MPIO and the bond0 iface to do load balancing or failover. ---eth2.228-fcoe | eth2 -----| | |---- bond0 | eth3 -----| | ---eth3.228-fcoe This worked because of a change we added to allow inactive slaves to rx 'exact' matches. This functionality was kept intact with the rx_handler mechanism. However now the vlan interface attached to the active slave never receives traffic because the bonding rx_handler updates the skb->dev and goto's another_round. Previously, the vlan_do_receive() logic was called before the bonding rx_handler. Now by the time vlan_do_receive calls vlan_find_dev() the skb->dev is set to bond0 and it is clear no vlan is attached to this iface. The vlan lookup fails. This patch moves the VLAN check above the rx_handler. A VLAN tagged frame is now routed to the eth2.228-fcoe iface in the above schematic. Untagged frames continue to the bond0 as normal. This case also remains intact, eth2 --> bond0 --> vlan.228 Here the skb is VLAN tagged but the vlan lookup fails on eth2 causing the bonding rx_handler to be called. On the second pass the vlan lookup is on the bond0 iface and completes as expected. Putting a VLAN.228 on both the bond0 and eth2 device will result in eth2.228 receiving the skb. I don't think this is completely unexpected and was the result prior to the rx_handler result. Note, the same setup is also used for other storage traffic that MPIO is used with eg. iSCSI and similar setups can be contrived without storage protocols. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Hans Schillstrom <hams.schillstrom@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10 03:16:41 -06:00
}
rx_handler = rcu_dereference(skb->dev->rx_handler);
if (rx_handler) {
if (pt_prev) {
ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = NULL;
}
switch (rx_handler(&skb)) {
case RX_HANDLER_CONSUMED:
ret = NET_RX_SUCCESS;
goto out;
case RX_HANDLER_ANOTHER:
goto another_round;
case RX_HANDLER_EXACT:
deliver_exact = true;
case RX_HANDLER_PASS:
break;
default:
BUG();
}
}
if (unlikely(skb_vlan_tag_present(skb))) {
if (skb_vlan_tag_get_id(skb))
skb->pkt_type = PACKET_OTHERHOST;
/* Note: we might in the future use prio bits
* and set skb->priority like in vlan_do_receive()
* For the time being, just ignore Priority Code Point
*/
skb->vlan_tci = 0;
}
type = skb->protocol;
/* deliver only exact match when indicated */
if (likely(!deliver_exact)) {
deliver_ptype_list_skb(skb, &pt_prev, orig_dev, type,
&ptype_base[ntohs(type) &
PTYPE_HASH_MASK]);
}
bonding: allow arp_ip_targets on separate vlans to use arp validation This allows a bond device to specify an arp_ip_target as a host that is not on the same vlan as the base bond device and still use arp validation. A configuration like this, now works: BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3" 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever 9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100 inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth1 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 1000 ARP IP target/s (n.n.n.n form): 10.0.100.1 Slave Interface: eth1 MII Status: up Link Failure Count: 1 Permanent HW addr: 00:40:05:30:ff:30 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:13:21:be:33:e9 Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 03:48:58 -07:00
deliver_ptype_list_skb(skb, &pt_prev, orig_dev, type,
&orig_dev->ptype_specific);
if (unlikely(skb->dev != orig_dev)) {
deliver_ptype_list_skb(skb, &pt_prev, orig_dev, type,
&skb->dev->ptype_specific);
}
if (pt_prev) {
if (unlikely(skb_orphan_frags(skb, GFP_ATOMIC)))
goto drop;
else
ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
} else {
drop:
if (!deliver_exact)
atomic_long_inc(&skb->dev->rx_dropped);
else
atomic_long_inc(&skb->dev->rx_nohandler);
kfree_skb(skb);
/* Jamal, now you will not able to escape explaining
* me how you were going to use this. :-)
*/
ret = NET_RX_DROP;
}
out:
return ret;
}
static int __netif_receive_skb(struct sk_buff *skb)
{
int ret;
if (sk_memalloc_socks() && skb_pfmemalloc(skb)) {
unsigned long pflags = current->flags;
/*
* PFMEMALLOC skbs are special, they should
* - be delivered to SOCK_MEMALLOC sockets only
* - stay away from userspace
* - have bounded memory usage
*
* Use PF_MEMALLOC as this saves us from propagating the allocation
* context down to all allocation sites.
*/
current->flags |= PF_MEMALLOC;
ret = __netif_receive_skb_core(skb, true);
tsk_restore_flags(current, pflags, PF_MEMALLOC);
} else
ret = __netif_receive_skb_core(skb, false);
return ret;
}
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
static int netif_receive_skb_internal(struct sk_buff *skb)
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
{
int ret;
net_timestamp_check(netdev_tstamp_prequeue, skb);
if (skb_defer_rx_timestamp(skb))
return NET_RX_SUCCESS;
rcu_read_lock();
#ifdef CONFIG_RPS
static keys: Introduce 'struct static_key', static_key_true()/false() and static_key_slow_[inc|dec]() So here's a boot tested patch on top of Jason's series that does all the cleanups I talked about and turns jump labels into a more intuitive to use facility. It should also address the various misconceptions and confusions that surround jump labels. Typical usage scenarios: #include <linux/static_key.h> struct static_key key = STATIC_KEY_INIT_TRUE; if (static_key_false(&key)) do unlikely code else do likely code Or: if (static_key_true(&key)) do likely code else do unlikely code The static key is modified via: static_key_slow_inc(&key); ... static_key_slow_dec(&key); The 'slow' prefix makes it abundantly clear that this is an expensive operation. I've updated all in-kernel code to use this everywhere. Note that I (intentionally) have not pushed through the rename blindly through to the lowest levels: the actual jump-label patching arch facility should be named like that, so we want to decouple jump labels from the static-key facility a bit. On non-jump-label enabled architectures static keys default to likely()/unlikely() branches. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: a.p.zijlstra@chello.nl Cc: mathieu.desnoyers@efficios.com Cc: davem@davemloft.net Cc: ddaney.cavm@gmail.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20120222085809.GA26397@elte.hu Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-02-24 00:31:31 -07:00
if (static_key_false(&rps_needed)) {
struct rps_dev_flow voidflow, *rflow = &voidflow;
int cpu = get_rps_cpu(skb->dev, skb, &rflow);
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
if (cpu >= 0) {
ret = enqueue_to_backlog(skb, cpu, &rflow->last_qtail);
rcu_read_unlock();
return ret;
}
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
}
#endif
ret = __netif_receive_skb(skb);
rcu_read_unlock();
return ret;
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
}
/**
* netif_receive_skb - process receive buffer from network
* @skb: buffer to process
*
* netif_receive_skb() is the main receive data processing function.
* It always succeeds. The buffer may be dropped during processing
* for congestion control or by the protocol layers.
*
* This function may only be called from softirq context and interrupts
* should be enabled.
*
* Return values (usually ignored):
* NET_RX_SUCCESS: no congestion
* NET_RX_DROP: packet was dropped
*/
int netif_receive_skb(struct sk_buff *skb)
{
trace_netif_receive_skb_entry(skb);
return netif_receive_skb_internal(skb);
}
EXPORT_SYMBOL(netif_receive_skb);
DEFINE_PER_CPU(struct work_struct, flush_works);
/* Network device is going away, flush any packets still pending */
static void flush_backlog(struct work_struct *work)
{
struct sk_buff *skb, *tmp;
struct softnet_data *sd;
local_bh_disable();
sd = this_cpu_ptr(&softnet_data);
local_irq_disable();
rps_lock(sd);
skb_queue_walk_safe(&sd->input_pkt_queue, skb, tmp) {
if (skb->dev->reg_state == NETREG_UNREGISTERING) {
__skb_unlink(skb, &sd->input_pkt_queue);
kfree_skb(skb);
input_queue_head_incr(sd);
}
}
rps_unlock(sd);
local_irq_enable();
skb_queue_walk_safe(&sd->process_queue, skb, tmp) {
if (skb->dev->reg_state == NETREG_UNREGISTERING) {
__skb_unlink(skb, &sd->process_queue);
kfree_skb(skb);
input_queue_head_incr(sd);
}
}
local_bh_enable();
}
static void flush_all_backlogs(void)
{
unsigned int cpu;
get_online_cpus();
for_each_online_cpu(cpu)
queue_work_on(cpu, system_highpri_wq,
per_cpu_ptr(&flush_works, cpu));
for_each_online_cpu(cpu)
flush_work(per_cpu_ptr(&flush_works, cpu));
put_online_cpus();
}
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
static int napi_gro_complete(struct sk_buff *skb)
{
struct packet_offload *ptype;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
__be16 type = skb->protocol;
struct list_head *head = &offload_base;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
int err = -ENOENT;
BUILD_BUG_ON(sizeof(struct napi_gro_cb) > sizeof(skb->cb));
if (NAPI_GRO_CB(skb)->count == 1) {
skb_shinfo(skb)->gso_size = 0;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
goto out;
}
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
rcu_read_lock();
list_for_each_entry_rcu(ptype, head, list) {
if (ptype->type != type || !ptype->callbacks.gro_complete)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
continue;
err = ptype->callbacks.gro_complete(skb, 0);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
break;
}
rcu_read_unlock();
if (err) {
WARN_ON(&ptype->list == head);
kfree_skb(skb);
return NET_RX_SUCCESS;
}
out:
return netif_receive_skb_internal(skb);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
/* napi->gro_list contains packets ordered by age.
* youngest packets at the head of it.
* Complete skbs in reverse order to reduce latencies.
*/
void napi_gro_flush(struct napi_struct *napi, bool flush_old)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
{
struct sk_buff *skb, *prev = NULL;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
/* scan list and build reverse chain */
for (skb = napi->gro_list; skb != NULL; skb = skb->next) {
skb->prev = prev;
prev = skb;
}
for (skb = prev; skb; skb = prev) {
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
skb->next = NULL;
if (flush_old && NAPI_GRO_CB(skb)->age == jiffies)
return;
prev = skb->prev;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
napi_gro_complete(skb);
napi->gro_count--;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
napi->gro_list = NULL;
}
EXPORT_SYMBOL(napi_gro_flush);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
static void gro_list_prepare(struct napi_struct *napi, struct sk_buff *skb)
{
struct sk_buff *p;
unsigned int maclen = skb->dev->hard_header_len;
u32 hash = skb_get_hash_raw(skb);
for (p = napi->gro_list; p; p = p->next) {
unsigned long diffs;
NAPI_GRO_CB(p)->flush = 0;
if (hash != skb_get_hash_raw(p)) {
NAPI_GRO_CB(p)->same_flow = 0;
continue;
}
diffs = (unsigned long)p->dev ^ (unsigned long)skb->dev;
diffs |= p->vlan_tci ^ skb->vlan_tci;
diffs |= skb_metadata_dst_cmp(p, skb);
if (maclen == ETH_HLEN)
diffs |= compare_ether_header(skb_mac_header(p),
skb_mac_header(skb));
else if (!diffs)
diffs = memcmp(skb_mac_header(p),
skb_mac_header(skb),
maclen);
NAPI_GRO_CB(p)->same_flow = !diffs;
}
}
static void skb_gro_reset_offset(struct sk_buff *skb)
{
const struct skb_shared_info *pinfo = skb_shinfo(skb);
const skb_frag_t *frag0 = &pinfo->frags[0];
NAPI_GRO_CB(skb)->data_offset = 0;
NAPI_GRO_CB(skb)->frag0 = NULL;
NAPI_GRO_CB(skb)->frag0_len = 0;
if (skb_mac_header(skb) == skb_tail_pointer(skb) &&
pinfo->nr_frags &&
!PageHighMem(skb_frag_page(frag0))) {
NAPI_GRO_CB(skb)->frag0 = skb_frag_address(frag0);
NAPI_GRO_CB(skb)->frag0_len = min_t(unsigned int,
skb_frag_size(frag0),
skb->end - skb->tail);
}
}
static void gro_pull_from_frag0(struct sk_buff *skb, int grow)
{
struct skb_shared_info *pinfo = skb_shinfo(skb);
BUG_ON(skb->end - skb->tail < grow);
memcpy(skb_tail_pointer(skb), NAPI_GRO_CB(skb)->frag0, grow);
skb->data_len -= grow;
skb->tail += grow;
pinfo->frags[0].page_offset += grow;
skb_frag_size_sub(&pinfo->frags[0], grow);
if (unlikely(!skb_frag_size(&pinfo->frags[0]))) {
skb_frag_unref(skb, 0);
memmove(pinfo->frags, pinfo->frags + 1,
--pinfo->nr_frags * sizeof(pinfo->frags[0]));
}
}
static enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
{
struct sk_buff **pp = NULL;
struct packet_offload *ptype;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
__be16 type = skb->protocol;
struct list_head *head = &offload_base;
int same_flow;
enum gro_result ret;
int grow;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
if (!(skb->dev->features & NETIF_F_GRO))
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
goto normal;
if (skb->csum_bad)
goto normal;
gro_list_prepare(napi, skb);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
rcu_read_lock();
list_for_each_entry_rcu(ptype, head, list) {
if (ptype->type != type || !ptype->callbacks.gro_receive)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
continue;
skb_set_network_header(skb, skb_gro_offset(skb));
skb_reset_mac_len(skb);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
NAPI_GRO_CB(skb)->same_flow = 0;
NAPI_GRO_CB(skb)->flush = skb_is_gso(skb) || skb_has_frag_list(skb);
NAPI_GRO_CB(skb)->free = 0;
NAPI_GRO_CB(skb)->encap_mark = 0;
NAPI_GRO_CB(skb)->recursion_counter = 0;
NAPI_GRO_CB(skb)->is_fou = 0;
NAPI_GRO_CB(skb)->is_atomic = 1;
NAPI_GRO_CB(skb)->gro_remcsum_start = 0;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
/* Setup for GRO checksum validation */
switch (skb->ip_summed) {
case CHECKSUM_COMPLETE:
NAPI_GRO_CB(skb)->csum = skb->csum;
NAPI_GRO_CB(skb)->csum_valid = 1;
NAPI_GRO_CB(skb)->csum_cnt = 0;
break;
case CHECKSUM_UNNECESSARY:
NAPI_GRO_CB(skb)->csum_cnt = skb->csum_level + 1;
NAPI_GRO_CB(skb)->csum_valid = 0;
break;
default:
NAPI_GRO_CB(skb)->csum_cnt = 0;
NAPI_GRO_CB(skb)->csum_valid = 0;
}
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
pp = ptype->callbacks.gro_receive(&napi->gro_list, skb);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
break;
}
rcu_read_unlock();
if (&ptype->list == head)
goto normal;
same_flow = NAPI_GRO_CB(skb)->same_flow;
ret = NAPI_GRO_CB(skb)->free ? GRO_MERGED_FREE : GRO_MERGED;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
if (pp) {
struct sk_buff *nskb = *pp;
*pp = nskb->next;
nskb->next = NULL;
napi_gro_complete(nskb);
napi->gro_count--;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
if (same_flow)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
goto ok;
if (NAPI_GRO_CB(skb)->flush)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
goto normal;
if (unlikely(napi->gro_count >= MAX_GRO_SKBS)) {
struct sk_buff *nskb = napi->gro_list;
/* locate the end of the list to select the 'oldest' flow */
while (nskb->next) {
pp = &nskb->next;
nskb = *pp;
}
*pp = NULL;
nskb->next = NULL;
napi_gro_complete(nskb);
} else {
napi->gro_count++;
}
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
NAPI_GRO_CB(skb)->count = 1;
NAPI_GRO_CB(skb)->age = jiffies;
NAPI_GRO_CB(skb)->last = skb;
skb_shinfo(skb)->gso_size = skb_gro_len(skb);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
skb->next = napi->gro_list;
napi->gro_list = skb;
ret = GRO_HELD;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
pull:
grow = skb_gro_offset(skb) - skb_headlen(skb);
if (grow > 0)
gro_pull_from_frag0(skb, grow);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
ok:
return ret;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
normal:
ret = GRO_NORMAL;
goto pull;
}
net-gre-gro: Add GRE support to the GRO stack This patch built on top of Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5dcd8755715c7143b4571d5c44f01796f1 "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07 11:23:19 -07:00
struct packet_offload *gro_find_receive_by_type(__be16 type)
{
struct list_head *offload_head = &offload_base;
struct packet_offload *ptype;
list_for_each_entry_rcu(ptype, offload_head, list) {
if (ptype->type != type || !ptype->callbacks.gro_receive)
continue;
return ptype;
}
return NULL;
}
EXPORT_SYMBOL(gro_find_receive_by_type);
net-gre-gro: Add GRE support to the GRO stack This patch built on top of Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5dcd8755715c7143b4571d5c44f01796f1 "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07 11:23:19 -07:00
struct packet_offload *gro_find_complete_by_type(__be16 type)
{
struct list_head *offload_head = &offload_base;
struct packet_offload *ptype;
list_for_each_entry_rcu(ptype, offload_head, list) {
if (ptype->type != type || !ptype->callbacks.gro_complete)
continue;
return ptype;
}
return NULL;
}
EXPORT_SYMBOL(gro_find_complete_by_type);
static gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb)
{
switch (ret) {
case GRO_NORMAL:
if (netif_receive_skb_internal(skb))
ret = GRO_DROP;
break;
case GRO_DROP:
kfree_skb(skb);
break;
case GRO_MERGED_FREE:
if (NAPI_GRO_CB(skb)->free == NAPI_GRO_FREE_STOLEN_HEAD) {
skb_dst_drop(skb);
kmem_cache_free(skbuff_head_cache, skb);
} else {
__kfree_skb(skb);
}
break;
case GRO_HELD:
case GRO_MERGED:
break;
}
return ret;
}
gro_result_t napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
{
skb_mark_napi_id(skb, napi);
trace_napi_gro_receive_entry(skb);
skb_gro_reset_offset(skb);
return napi_skb_finish(dev_gro_receive(napi, skb), skb);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
EXPORT_SYMBOL(napi_gro_receive);
static void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
{
if (unlikely(skb->pfmemalloc)) {
consume_skb(skb);
return;
}
__skb_pull(skb, skb_headlen(skb));
/* restore the reserve we had after netdev_alloc_skb_ip_align() */
skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN - skb_headroom(skb));
vlan: Centralize handling of hardware acceleration. Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20 07:56:06 -06:00
skb->vlan_tci = 0;
skb->dev = napi->dev;
skb->skb_iif = 0;
skb->encapsulation = 0;
skb_shinfo(skb)->gso_type = 0;
skb->truesize = SKB_TRUESIZE(skb_end_offset(skb));
napi->skb = skb;
}
struct sk_buff *napi_get_frags(struct napi_struct *napi)
{
struct sk_buff *skb = napi->skb;
if (!skb) {
skb = napi_alloc_skb(napi, GRO_MAX_HEAD);
if (skb) {
napi->skb = skb;
skb_mark_napi_id(skb, napi);
}
}
return skb;
}
EXPORT_SYMBOL(napi_get_frags);
static gro_result_t napi_frags_finish(struct napi_struct *napi,
struct sk_buff *skb,
gro_result_t ret)
{
switch (ret) {
case GRO_NORMAL:
case GRO_HELD:
__skb_push(skb, ETH_HLEN);
skb->protocol = eth_type_trans(skb, skb->dev);
if (ret == GRO_NORMAL && netif_receive_skb_internal(skb))
ret = GRO_DROP;
break;
case GRO_DROP:
case GRO_MERGED_FREE:
napi_reuse_skb(napi, skb);
break;
case GRO_MERGED:
break;
}
return ret;
}
/* Upper GRO stack assumes network header starts at gro_offset=0
* Drivers could call both napi_gro_frags() and napi_gro_receive()
* We copy ethernet header into skb->data to have a common layout.
*/
static struct sk_buff *napi_frags_skb(struct napi_struct *napi)
{
struct sk_buff *skb = napi->skb;
const struct ethhdr *eth;
unsigned int hlen = sizeof(*eth);
napi->skb = NULL;
skb_reset_mac_header(skb);
skb_gro_reset_offset(skb);
eth = skb_gro_header_fast(skb, 0);
if (unlikely(skb_gro_header_hard(skb, hlen))) {
eth = skb_gro_header_slow(skb, hlen, 0);
if (unlikely(!eth)) {
net_warn_ratelimited("%s: dropping impossible skb from %s\n",
__func__, napi->dev->name);
napi_reuse_skb(napi, skb);
return NULL;
}
} else {
gro_pull_from_frag0(skb, hlen);
NAPI_GRO_CB(skb)->frag0 += hlen;
NAPI_GRO_CB(skb)->frag0_len -= hlen;
}
__skb_pull(skb, hlen);
/*
* This works because the only protocols we care about don't require
* special handling.
* We'll fix it up properly in napi_frags_finish()
*/
skb->protocol = eth->h_proto;
return skb;
}
gro_result_t napi_gro_frags(struct napi_struct *napi)
{
struct sk_buff *skb = napi_frags_skb(napi);
if (!skb)
return GRO_DROP;
trace_napi_gro_frags_entry(skb);
return napi_frags_finish(napi, skb, dev_gro_receive(napi, skb));
}
EXPORT_SYMBOL(napi_gro_frags);
/* Compute the checksum from gro_offset and return the folded value
* after adding in any pseudo checksum.
*/
__sum16 __skb_gro_checksum_complete(struct sk_buff *skb)
{
__wsum wsum;
__sum16 sum;
wsum = skb_checksum(skb, skb_gro_offset(skb), skb_gro_len(skb), 0);
/* NAPI_GRO_CB(skb)->csum holds pseudo checksum */
sum = csum_fold(csum_add(NAPI_GRO_CB(skb)->csum, wsum));
if (likely(!sum)) {
if (unlikely(skb->ip_summed == CHECKSUM_COMPLETE) &&
!skb->csum_complete_sw)
netdev_rx_csum_fault(skb->dev);
}
NAPI_GRO_CB(skb)->csum = wsum;
NAPI_GRO_CB(skb)->csum_valid = 1;
return sum;
}
EXPORT_SYMBOL(__skb_gro_checksum_complete);
/*
* net_rps_action_and_irq_enable sends any pending IPI's for rps.
* Note: called with local irq disabled, but exits with local irq enabled.
*/
static void net_rps_action_and_irq_enable(struct softnet_data *sd)
{
#ifdef CONFIG_RPS
struct softnet_data *remsd = sd->rps_ipi_list;
if (remsd) {
sd->rps_ipi_list = NULL;
local_irq_enable();
/* Send pending IPI's to kick RPS processing on remote cpus. */
while (remsd) {
struct softnet_data *next = remsd->rps_ipi_next;
if (cpu_online(remsd->cpu))
smp_call_function_single_async(remsd->cpu,
smp: Remove wait argument from __smp_call_function_single() The main point of calling __smp_call_function_single() is to send an IPI in a pure asynchronous way. By embedding a csd in an object, a caller can send the IPI without waiting for a previous one to complete as is required by smp_call_function_single() for example. As such, sending this kind of IPI can be safe even when irqs are disabled. This flexibility comes at the expense of the caller who then needs to synchronize the csd lifecycle by himself and make sure that IPIs on a single csd are serialized. This is how __smp_call_function_single() works when wait = 0 and this usecase is relevant. Now there don't seem to be any usecase with wait = 1 that can't be covered by smp_call_function_single() instead, which is safer. Lets look at the two possible scenario: 1) The user calls __smp_call_function_single(wait = 1) on a csd embedded in an object. It looks like a nice and convenient pattern at the first sight because we can then retrieve the object from the IPI handler easily. But actually it is a waste of memory space in the object since the csd can be allocated from the stack by smp_call_function_single(wait = 1) and the object can be passed an the IPI argument. Besides that, embedding the csd in an object is more error prone because the caller must take care of the serialization of the IPIs for this csd. 2) The user calls __smp_call_function_single(wait = 1) on a csd that is allocated on the stack. It's ok but smp_call_function_single() can do it as well and it already takes care of the allocation on the stack. Again it's more simple and less error prone. Therefore, using the underscore prepend API version with wait = 1 is a bad pattern and a sign that the caller can do safer and more simple. There was a single user of that which has just been converted. So lets remove this option to discourage further users. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 08:40:01 -07:00
&remsd->csd);
remsd = next;
}
} else
#endif
local_irq_enable();
}
static bool sd_has_rps_ipi_waiting(struct softnet_data *sd)
{
#ifdef CONFIG_RPS
return sd->rps_ipi_list != NULL;
#else
return false;
#endif
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
static int process_backlog(struct napi_struct *napi, int quota)
{
struct softnet_data *sd = container_of(napi, struct softnet_data, backlog);
bool again = true;
int work = 0;
/* Check if we have pending ipi, its better to send them now,
* not waiting net_rx_action() end.
*/
if (sd_has_rps_ipi_waiting(sd)) {
local_irq_disable();
net_rps_action_and_irq_enable(sd);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
napi->weight = weight_p;
while (again) {
struct sk_buff *skb;
while ((skb = __skb_dequeue(&sd->process_queue))) {
rcu_read_lock();
__netif_receive_skb(skb);
rcu_read_unlock();
input_queue_head_incr(sd);
if (++work >= quota)
return work;
}
local_irq_disable();
rps_lock(sd);
if (skb_queue_empty(&sd->input_pkt_queue)) {
/*
* Inline a custom version of __napi_complete().
* only current cpu owns and manipulates this napi,
* and NAPI_STATE_SCHED is the only possible flag set
* on backlog.
* We can use a plain write instead of clear_bit(),
* and we dont need an smp_mb() memory barrier.
*/
napi->state = 0;
again = false;
} else {
skb_queue_splice_tail_init(&sd->input_pkt_queue,
&sd->process_queue);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
}
rps_unlock(sd);
local_irq_enable();
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
return work;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
/**
* __napi_schedule - schedule for receive
* @n: entry to schedule
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
*
* The entry's receive function will be scheduled to run.
* Consider using __napi_schedule_irqoff() if hard irqs are masked.
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
*/
void __napi_schedule(struct napi_struct *n)
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
{
unsigned long flags;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
local_irq_save(flags);
____napi_schedule(this_cpu_ptr(&softnet_data), n);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
local_irq_restore(flags);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
EXPORT_SYMBOL(__napi_schedule);
/**
* __napi_schedule_irqoff - schedule for receive
* @n: entry to schedule
*
* Variant of __napi_schedule() assuming hard irqs are masked
*/
void __napi_schedule_irqoff(struct napi_struct *n)
{
____napi_schedule(this_cpu_ptr(&softnet_data), n);
}
EXPORT_SYMBOL(__napi_schedule_irqoff);
bool __napi_complete(struct napi_struct *n)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
{
BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
/* Some drivers call us directly, instead of calling
* napi_complete_done().
*/
if (unlikely(test_bit(NAPI_STATE_IN_BUSY_POLL, &n->state)))
return false;
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
list_del_init(&n->poll_list);
smp_mb__before_atomic();
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
clear_bit(NAPI_STATE_SCHED, &n->state);
return true;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
EXPORT_SYMBOL(__napi_complete);
bool napi_complete_done(struct napi_struct *n, int work_done)
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
{
unsigned long flags;
/*
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
* 1) Don't let napi dequeue from the cpu poll list
* just in case its running on a different cpu.
* 2) If we are busy polling, do nothing here, we have
* the guarantee we will be called later.
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
*/
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
if (unlikely(n->state & (NAPIF_STATE_NPSVC |
NAPIF_STATE_IN_BUSY_POLL)))
return false;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
if (n->gro_list) {
unsigned long timeout = 0;
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
if (work_done)
timeout = n->dev->gro_flush_timeout;
if (timeout)
hrtimer_start(&n->timer, ns_to_ktime(timeout),
HRTIMER_MODE_REL_PINNED);
else
napi_gro_flush(n, false);
}
if (likely(list_empty(&n->poll_list))) {
WARN_ON_ONCE(!test_and_clear_bit(NAPI_STATE_SCHED, &n->state));
} else {
/* If n->poll_list is not empty, we need to mask irqs */
local_irq_save(flags);
__napi_complete(n);
local_irq_restore(flags);
}
return true;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
EXPORT_SYMBOL(napi_complete_done);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
/* must be called under rcu_read_lock(), as we dont take a reference */
static struct napi_struct *napi_by_id(unsigned int napi_id)
{
unsigned int hash = napi_id % HASH_SIZE(napi_hash);
struct napi_struct *napi;
hlist_for_each_entry_rcu(napi, &napi_hash[hash], napi_hash_node)
if (napi->napi_id == napi_id)
return napi;
return NULL;
}
#if defined(CONFIG_NET_RX_BUSY_POLL)
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
#define BUSY_POLL_BUDGET 8
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
static void busy_poll_stop(struct napi_struct *napi, void *have_poll_lock)
{
int rc;
clear_bit(NAPI_STATE_IN_BUSY_POLL, &napi->state);
local_bh_disable();
/* All we really want here is to re-enable device interrupts.
* Ideally, a new ndo_busy_poll_stop() could avoid another round.
*/
rc = napi->poll(napi, BUSY_POLL_BUDGET);
netpoll_poll_unlock(have_poll_lock);
if (rc == BUSY_POLL_BUDGET)
__napi_schedule(napi);
local_bh_enable();
if (local_softirq_pending())
do_softirq();
}
bool sk_busy_loop(struct sock *sk, int nonblock)
{
unsigned long end_time = !nonblock ? sk_busy_loop_end_time(sk) : 0;
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
int (*napi_poll)(struct napi_struct *napi, int budget);
int (*busy_poll)(struct napi_struct *dev);
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
void *have_poll_lock = NULL;
struct napi_struct *napi;
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
int rc;
restart:
rc = false;
napi_poll = NULL;
net: allow BH servicing in sk_busy_loop() Instead of blocking BH in whole sk_busy_loop(), block them only around ->ndo_busy_poll() calls. This has many benefits. 1) allow tunneled traffic to use busy poll as well as native traffic. Tunnels handlers usually call netif_rx() and depend on net_rx_action() being run (from sofirq handler) 2) allow RFS/RPS being used (sending IPI to other cpus if needed) 3) use the 'lets burn cpu cycles' budget to do useful work (like TX completions, timers, RCU callbacks...) 4) reduce BH latencies, making busy poll a better citizen. Tested: Tested with SIT tunnel lpaa5:~# echo 0 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 37373.93 16384 87380 Now enable busy poll on both hosts lpaa5:~# echo 70 >/proc/sys/net/core/busy_read lpaa6:~# echo 70 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 58314.77 16384 87380 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18 07:30:53 -07:00
rcu_read_lock();
napi = napi_by_id(sk->sk_napi_id);
if (!napi)
goto out;
/* Note: ndo_busy_poll method is optional in linux-4.5 */
busy_poll = napi->dev->netdev_ops->ndo_busy_poll;
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
preempt_disable();
for (;;) {
rc = 0;
net: allow BH servicing in sk_busy_loop() Instead of blocking BH in whole sk_busy_loop(), block them only around ->ndo_busy_poll() calls. This has many benefits. 1) allow tunneled traffic to use busy poll as well as native traffic. Tunnels handlers usually call netif_rx() and depend on net_rx_action() being run (from sofirq handler) 2) allow RFS/RPS being used (sending IPI to other cpus if needed) 3) use the 'lets burn cpu cycles' budget to do useful work (like TX completions, timers, RCU callbacks...) 4) reduce BH latencies, making busy poll a better citizen. Tested: Tested with SIT tunnel lpaa5:~# echo 0 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 37373.93 16384 87380 Now enable busy poll on both hosts lpaa5:~# echo 70 >/proc/sys/net/core/busy_read lpaa6:~# echo 70 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 58314.77 16384 87380 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18 07:30:53 -07:00
local_bh_disable();
if (busy_poll) {
rc = busy_poll(napi);
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
goto count;
}
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
if (!napi_poll) {
unsigned long val = READ_ONCE(napi->state);
/* If multiple threads are competing for this napi,
* we avoid dirtying napi->state as much as we can.
*/
if (val & (NAPIF_STATE_DISABLE | NAPIF_STATE_SCHED |
NAPIF_STATE_IN_BUSY_POLL))
goto count;
if (cmpxchg(&napi->state, val,
val | NAPIF_STATE_IN_BUSY_POLL |
NAPIF_STATE_SCHED) != val)
goto count;
have_poll_lock = netpoll_poll_lock(napi);
napi_poll = napi->poll;
}
rc = napi_poll(napi, BUSY_POLL_BUDGET);
trace_napi_poll(napi, rc, BUSY_POLL_BUDGET);
count:
net: allow BH servicing in sk_busy_loop() Instead of blocking BH in whole sk_busy_loop(), block them only around ->ndo_busy_poll() calls. This has many benefits. 1) allow tunneled traffic to use busy poll as well as native traffic. Tunnels handlers usually call netif_rx() and depend on net_rx_action() being run (from sofirq handler) 2) allow RFS/RPS being used (sending IPI to other cpus if needed) 3) use the 'lets burn cpu cycles' budget to do useful work (like TX completions, timers, RCU callbacks...) 4) reduce BH latencies, making busy poll a better citizen. Tested: Tested with SIT tunnel lpaa5:~# echo 0 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 37373.93 16384 87380 Now enable busy poll on both hosts lpaa5:~# echo 70 >/proc/sys/net/core/busy_read lpaa6:~# echo 70 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 58314.77 16384 87380 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18 07:30:53 -07:00
if (rc > 0)
__NET_ADD_STATS(sock_net(sk),
LINUX_MIB_BUSYPOLLRXPACKETS, rc);
net: allow BH servicing in sk_busy_loop() Instead of blocking BH in whole sk_busy_loop(), block them only around ->ndo_busy_poll() calls. This has many benefits. 1) allow tunneled traffic to use busy poll as well as native traffic. Tunnels handlers usually call netif_rx() and depend on net_rx_action() being run (from sofirq handler) 2) allow RFS/RPS being used (sending IPI to other cpus if needed) 3) use the 'lets burn cpu cycles' budget to do useful work (like TX completions, timers, RCU callbacks...) 4) reduce BH latencies, making busy poll a better citizen. Tested: Tested with SIT tunnel lpaa5:~# echo 0 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 37373.93 16384 87380 Now enable busy poll on both hosts lpaa5:~# echo 70 >/proc/sys/net/core/busy_read lpaa6:~# echo 70 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 58314.77 16384 87380 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18 07:30:53 -07:00
local_bh_enable();
if (rc == LL_FLUSH_FAILED)
break; /* permanent failure */
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
if (nonblock || !skb_queue_empty(&sk->sk_receive_queue) ||
busy_loop_timeout(end_time))
break;
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
if (unlikely(need_resched())) {
if (napi_poll)
busy_poll_stop(napi, have_poll_lock);
preempt_enable();
rcu_read_unlock();
cond_resched();
rc = !skb_queue_empty(&sk->sk_receive_queue);
if (rc || busy_loop_timeout(end_time))
return rc;
goto restart;
}
Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The tree got pretty big in this development cycle, but the net effect is pretty good: 115 files changed, 673 insertions(+), 1522 deletions(-) The main changes were: - Rework and generalize the mutex code to remove per arch mutex primitives. (Peter Zijlstra) - Add vCPU preemption support: add an interface to query the preemption status of vCPUs and use it in locking primitives - this optimizes paravirt performance. (Pan Xinhui, Juergen Gross, Christian Borntraeger) - Introduce cpu_relax_yield() and remov cpu_relax_lowlatency() to clean up and improve the s390 lock yielding machinery and its core kernel impact. (Christian Borntraeger) - Micro-optimize mutexes some more. (Waiman Long) - Reluctantly add the to-be-deprecated mutex_trylock_recursive() interface on a temporary basis, to give the DRM code more time to get rid of its locking hacks. Any other users will be NAK-ed on sight. (We turned off the deprecation warning for the time being to not pollute the build log.) (Peter Zijlstra) - Improve the rtmutex code a bit, in light of recent long lived bugs/races. (Thomas Gleixner) - Misc fixes, cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/paravirt: Fix bool return type for PVOP_CALL() x86/paravirt: Fix native_patch() locking/ww_mutex: Use relaxed atomics locking/rtmutex: Explain locking rules for rt_mutex_proxy_unlock()/init_proxy_locked() locking/rtmutex: Get rid of RT_MUTEX_OWNER_MASKALL x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted() locking/mutex: Break out of expensive busy-loop on {mutex,rwsem}_spin_on_owner() when owner vCPU is preempted locking/osq: Break out of spin-wait busy waiting loop for a preempted vCPU in osq_lock() Documentation/virtual/kvm: Support the vCPU preemption check x86/xen: Support the vCPU preemption check x86/kvm: Support the vCPU preemption check x86/kvm: Support the vCPU preemption check kvm: Introduce kvm_write_guest_offset_cached() locking/core, x86/paravirt: Implement vcpu_is_preempted(cpu) for KVM and Xen guests locking/spinlocks, s390: Implement vcpu_is_preempted(cpu) locking/core, powerpc: Implement vcpu_is_preempted(cpu) sched/core: Introduce the vcpu_is_preempted(cpu) interface sched/wake_q: Rename WAKE_Q to DEFINE_WAKE_Q locking/core: Provide common cpu_relax_yield() definition locking/mutex: Don't mark mutex_trylock_recursive() as deprecated, temporarily ...
2016-12-12 11:48:02 -07:00
cpu_relax();
net: busy-poll: allow preemption in sk_busy_loop() After commit 4cd13c21b207 ("softirq: Let ksoftirqd do its job"), sk_busy_loop() needs a bit of care : softirqs might be delayed since we do not allow preemption yet. This patch adds preemptiom points in sk_busy_loop(), and makes sure no unnecessary cache line dirtying or atomic operations are done while looping. A new flag is added into napi->state : NAPI_STATE_IN_BUSY_POLL This prevents napi_complete_done() from clearing NAPIF_STATE_SCHED, so that sk_busy_loop() does not have to grab it again. Similarly, netpoll_poll_lock() is done one time. This gives about 10 to 20 % improvement in various busy polling tests, especially when many threads are busy polling in configurations with large number of NIC queues. This should allow experimenting with bigger delays without hurting overall latencies. Tested: On a 40Gb mlx4 NIC, 32 RX/TX queues. echo 70 >/proc/sys/net/core/busy_read for i in `seq 1 40`; do echo -n $i: ; ./super_netperf $i -H lpaa24 -t UDP_RR -- -N -n; done Before: After: 1: 90072 92819 2: 157289 184007 3: 235772 213504 4: 344074 357513 5: 394755 458267 6: 461151 487819 7: 549116 625963 8: 544423 716219 9: 720460 738446 10: 794686 837612 11: 915998 923960 12: 937507 925107 13: 1019677 971506 14: 1046831 1113650 15: 1114154 1148902 16: 1105221 1179263 17: 1266552 1299585 18: 1258454 1383817 19: 1341453 1312194 20: 1363557 1488487 21: 1387979 1501004 22: 1417552 1601683 23: 1550049 1642002 24: 1568876 1601915 25: 1560239 1683607 26: 1640207 1745211 27: 1706540 1723574 28: 1638518 1722036 29: 1734309 1757447 30: 1782007 1855436 31: 1724806 1888539 32: 1717716 1944297 33: 1778716 1869118 34: 1805738 1983466 35: 1815694 2020758 36: 1893059 2035632 37: 1843406 2034653 38: 1888830 2086580 39: 1972827 2143567 40: 1877729 2181851 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Adam Belay <abelay@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Cc: Yuval Mintz <Yuval.Mintz@cavium.com> Cc: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15 11:15:11 -07:00
}
if (napi_poll)
busy_poll_stop(napi, have_poll_lock);
preempt_enable();
rc = !skb_queue_empty(&sk->sk_receive_queue);
out:
net: allow BH servicing in sk_busy_loop() Instead of blocking BH in whole sk_busy_loop(), block them only around ->ndo_busy_poll() calls. This has many benefits. 1) allow tunneled traffic to use busy poll as well as native traffic. Tunnels handlers usually call netif_rx() and depend on net_rx_action() being run (from sofirq handler) 2) allow RFS/RPS being used (sending IPI to other cpus if needed) 3) use the 'lets burn cpu cycles' budget to do useful work (like TX completions, timers, RCU callbacks...) 4) reduce BH latencies, making busy poll a better citizen. Tested: Tested with SIT tunnel lpaa5:~# echo 0 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 37373.93 16384 87380 Now enable busy poll on both hosts lpaa5:~# echo 70 >/proc/sys/net/core/busy_read lpaa6:~# echo 70 >/proc/sys/net/core/busy_read lpaa5:~# ./netperf -H 2002:af6:786::1 -t TCP_RR MIGRATED TCP REQUEST/RESPONSE TEST from ::0 (::) port 0 AF_INET6 to 2002:af6:786::1 () port 0 AF_INET6 : first burst 0 Local /Remote Socket Size Request Resp. Elapsed Trans. Send Recv Size Size Time Rate bytes Bytes bytes bytes secs. per sec 16384 87380 1 1 10.00 58314.77 16384 87380 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-18 07:30:53 -07:00
rcu_read_unlock();
return rc;
}
EXPORT_SYMBOL(sk_busy_loop);
#endif /* CONFIG_NET_RX_BUSY_POLL */
static void napi_hash_add(struct napi_struct *napi)
{
if (test_bit(NAPI_STATE_NO_BUSY_POLL, &napi->state) ||
test_and_set_bit(NAPI_STATE_HASHED, &napi->state))
return;
spin_lock(&napi_hash_lock);
/* 0..NR_CPUS+1 range is reserved for sender_cpu use */
do {
if (unlikely(++napi_gen_id < NR_CPUS + 1))
napi_gen_id = NR_CPUS + 1;
} while (napi_by_id(napi_gen_id));
napi->napi_id = napi_gen_id;
hlist_add_head_rcu(&napi->napi_hash_node,
&napi_hash[napi->napi_id % HASH_SIZE(napi_hash)]);
spin_unlock(&napi_hash_lock);
}
/* Warning : caller is responsible to make sure rcu grace period
* is respected before freeing memory containing @napi
*/
bool napi_hash_del(struct napi_struct *napi)
{
bool rcu_sync_needed = false;
spin_lock(&napi_hash_lock);
if (test_and_clear_bit(NAPI_STATE_HASHED, &napi->state)) {
rcu_sync_needed = true;
hlist_del_rcu(&napi->napi_hash_node);
}
spin_unlock(&napi_hash_lock);
return rcu_sync_needed;
}
EXPORT_SYMBOL_GPL(napi_hash_del);
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
static enum hrtimer_restart napi_watchdog(struct hrtimer *timer)
{
struct napi_struct *napi;
napi = container_of(timer, struct napi_struct, timer);
if (napi->gro_list)
napi_schedule(napi);
return HRTIMER_NORESTART;
}
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
int (*poll)(struct napi_struct *, int), int weight)
{
INIT_LIST_HEAD(&napi->poll_list);
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
hrtimer_init(&napi->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL_PINNED);
napi->timer.function = napi_watchdog;
napi->gro_count = 0;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
napi->gro_list = NULL;
napi->skb = NULL;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
napi->poll = poll;
if (weight > NAPI_POLL_WEIGHT)
pr_err_once("netif_napi_add() called with weight %d on device %s\n",
weight, dev->name);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
napi->weight = weight;
list_add(&napi->dev_list, &dev->napi_list);
napi->dev = dev;
#ifdef CONFIG_NETPOLL
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
napi->poll_owner = -1;
#endif
set_bit(NAPI_STATE_SCHED, &napi->state);
napi_hash_add(napi);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
EXPORT_SYMBOL(netif_napi_add);
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
void napi_disable(struct napi_struct *n)
{
might_sleep();
set_bit(NAPI_STATE_DISABLE, &n->state);
while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
msleep(1);
netpoll: Close race condition between poll_one_napi and napi_disable Drivers might call napi_disable while not holding the napi instance poll_lock. In those instances, its possible for a race condition to exist between poll_one_napi and napi_disable. That is to say, poll_one_napi only tests the NAPI_STATE_SCHED bit to see if there is work to do during a poll, and as such the following may happen: CPU0 CPU1 ndo_tx_timeout napi_poll_dev napi_disable poll_one_napi test_and_set_bit (ret 0) test_bit (ret 1) reset adapter napi_poll_routine If the adapter gets a tx timeout without a napi instance scheduled, its possible for the adapter to think it has exclusive access to the hardware (as the napi instance is now scheduled via the napi_disable call), while the netpoll code thinks there is simply work to do. The result is parallel hardware access leading to corrupt data structures in the driver, and a crash. Additionaly, there is another, more critical race between netpoll and napi_disable. The disabled napi state is actually identical to the scheduled state for a given napi instance. The implication being that, if a napi instance is disabled, a netconsole instance would see the napi state of the device as having been scheduled, and poll it, likely while the driver was dong something requiring exclusive access. In the case above, its fairly clear that not having the rings in a state ready to be polled will cause any number of crashes. The fix should be pretty easy. netpoll uses its own bit to indicate that that the napi instance is in a state of being serviced by netpoll (NAPI_STATE_NPSVC). We can just gate disabling on that bit as well as the sched bit. That should prevent netpoll from conducting a napi poll if we convert its set bit to a test_and_set_bit operation to provide mutual exclusion Change notes: V2) Remove a trailing whtiespace Resubmit with proper subject prefix V3) Clean up spacing nits Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: jmaxwell@redhat.com Tested-by: jmaxwell@redhat.com Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23 12:57:58 -06:00
while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
msleep(1);
net: gro: add a per device gro flush timer Tuning coalescing parameters on NIC can be really hard. Servers can handle both bulk and RPC like traffic, with conflicting goals : bulk flows want as big GRO packets as possible, RPC want minimal latencies. To reach big GRO packets on 10Gbe NIC, one can use : ethtool -C eth0 rx-usecs 4 rx-frames 44 But this penalizes rpc sessions, with an increase of latencies, up to 50% in some cases, as NICs generally do not force an interrupt when a packet with TCP Push flag is received. Some NICs do not have an absolute timer, only a timer rearmed for every incoming packet. This patch uses a different strategy : Let GRO stack decides what do do, based on traffic pattern. Packets with Push flag wont be delayed. Packets without Push flag might be held in GRO engine, if we keep receiving data. This new mechanism is off by default, and shall be enabled by setting /sys/class/net/ethX/gro_flush_timeout to a value in nanosecond. To fully enable this mechanism, drivers should use napi_complete_done() instead of napi_complete(). Tested: Ran 200 netperf TCP_STREAM from A to B (10Gbe mlx4 link, 8 RX queues) Without this feature, we send back about 305,000 ACK per second. GRO aggregation ratio is low (811/305 = 2.65 segments per GRO packet) Setting a timer of 2000 nsec is enough to increase GRO packet sizes and reduce number of ACK packets. (811/19.2 = 42) Receiver performs less calls to upper stacks, less wakes up. This also reduces cpu usage on the sender, as it receives less ACK packets. Note that reducing number of wakes up increases cpu efficiency, but can decrease QPS, as applications wont have the chance to warmup cpu caches doing a partial read of RPC requests/answers if they fit in one skb. B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811269.80 305732.30 1199462.57 19705.72 0.00 0.00 0.50 B:~# echo 2000 >/sys/class/net/eth0/gro_flush_timeout B:~# sar -n DEV 1 10 | grep eth0 | tail -1 Average: eth0 811577.30 19230.80 1199916.51 1239.80 0.00 0.00 0.50 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 22:09:44 -07:00
hrtimer_cancel(&n->timer);
clear_bit(NAPI_STATE_DISABLE, &n->state);
}
EXPORT_SYMBOL(napi_disable);
/* Must be called in process context */
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
void netif_napi_del(struct napi_struct *napi)
{
might_sleep();
if (napi_hash_del(napi))
synchronize_net();
list_del_init(&napi->dev_list);
napi_free_frags(napi);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
kfree_skb_list(napi->gro_list);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
napi->gro_list = NULL;
napi->gro_count = 0;
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
}
EXPORT_SYMBOL(netif_napi_del);
static int napi_poll(struct napi_struct *n, struct list_head *repoll)
{
void *have;
int work, weight;
list_del_init(&n->poll_list);
have = netpoll_poll_lock(n);
weight = n->weight;
/* This NAPI_STATE_SCHED test is for avoiding a race
* with netpoll's poll_napi(). Only the entity which
* obtains the lock and sees NAPI_STATE_SCHED set will
* actually make the ->poll() call. Therefore we avoid
* accidentally calling ->poll() when NAPI is not scheduled.
*/
work = 0;
if (test_bit(NAPI_STATE_SCHED, &n->state)) {
work = n->poll(n, weight);
trace_napi_poll(n, work, weight);
}
WARN_ON_ONCE(work > weight);
if (likely(work < weight))
goto out_unlock;
/* Drivers must not modify the NAPI state if they
* consume the entire weight. In such cases this code
* still "owns" the NAPI instance and therefore can
* move the instance around on the list at-will.
*/
if (unlikely(napi_disable_pending(n))) {
napi_complete(n);
goto out_unlock;
}
if (n->gro_list) {
/* flush too old packets
* If HZ < 1000, flush all packets.
*/
napi_gro_flush(n, HZ >= 1000);
}
/* Some drivers may have called napi_schedule
* prior to exhausting their budget.
*/
if (unlikely(!list_empty(&n->poll_list))) {
pr_warn_once("%s: Budget exhausted after napi rescheduled\n",
n->dev ? n->dev->name : "backlog");
goto out_unlock;
}
list_add_tail(&n->poll_list, repoll);
out_unlock:
netpoll_poll_unlock(have);
return work;
}
static __latent_entropy void net_rx_action(struct softirq_action *h)
{
struct softnet_data *sd = this_cpu_ptr(&softnet_data);
unsigned long time_limit = jiffies + 2;
int budget = netdev_budget;
LIST_HEAD(list);
LIST_HEAD(repoll);
local_irq_disable();
list_splice_init(&sd->poll_list, &list);
local_irq_enable();
for (;;) {
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
struct napi_struct *n;
if (list_empty(&list)) {
if (!sd_has_rps_ipi_waiting(sd) && list_empty(&repoll))
goto out;
break;
}
n = list_first_entry(&list, struct napi_struct, poll_list);
budget -= napi_poll(n, &repoll);
/* If softirq window is exhausted then punt.
* Allow this to run for 2 jiffies since which will allow
* an average latency of 1.5/HZ.
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 17:41:36 -06:00
*/
if (unlikely(budget <= 0 ||
time_after_eq(jiffies, time_limit))) {
sd->time_squeeze++;
break;
}
}
local_irq_disable();
list_splice_tail_init(&sd->poll_list, &list);
list_splice_tail(&repoll, &list);
list_splice(&list, &sd->poll_list);
if (!list_empty(&sd->poll_list))
__raise_softirq_irqoff(NET_RX_SOFTIRQ);
net_rps_action_and_irq_enable(sd);
out:
__kfree_skb_flush();
}
struct netdev_adjacent {
struct net_device *dev;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
/* upper master flag, there can only be one master device per list */
bool master;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
/* counter for the number of times this device was added to us */
u16 ref_nr;
/* private field for the users */
void *private;
struct list_head list;
struct rcu_head rcu;
};
static struct netdev_adjacent *__netdev_find_adj(struct net_device *adj_dev,
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
struct list_head *adj_list)
{
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
struct netdev_adjacent *adj;
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
list_for_each_entry(adj, adj_list, list) {
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
if (adj->dev == adj_dev)
return adj;
}
return NULL;
}
static int __netdev_has_upper_dev(struct net_device *upper_dev, void *data)
{
struct net_device *dev = data;
return upper_dev == dev;
}
/**
* netdev_has_upper_dev - Check if device is linked to an upper device
* @dev: device
* @upper_dev: upper device to check
*
* Find out if a device is linked to specified upper device and return true
* in case it is. Note that this checks only immediate upper device,
* not through a complete stack of devices. The caller must hold the RTNL lock.
*/
bool netdev_has_upper_dev(struct net_device *dev,
struct net_device *upper_dev)
{
ASSERT_RTNL();
return netdev_walk_all_upper_dev_rcu(dev, __netdev_has_upper_dev,
upper_dev);
}
EXPORT_SYMBOL(netdev_has_upper_dev);
/**
* netdev_has_upper_dev_all - Check if device is linked to an upper device
* @dev: device
* @upper_dev: upper device to check
*
* Find out if a device is linked to specified upper device and return true
* in case it is. Note that this checks the entire upper device chain.
* The caller must hold rcu lock.
*/
bool netdev_has_upper_dev_all_rcu(struct net_device *dev,
struct net_device *upper_dev)
{
return !!netdev_walk_all_upper_dev_rcu(dev, __netdev_has_upper_dev,
upper_dev);
}
EXPORT_SYMBOL(netdev_has_upper_dev_all_rcu);
/**
* netdev_has_any_upper_dev - Check if device is linked to some device
* @dev: device
*
* Find out if a device is linked to an upper device and return true in case
* it is. The caller must hold the RTNL lock.
*/
static bool netdev_has_any_upper_dev(struct net_device *dev)
{
ASSERT_RTNL();
return !list_empty(&dev->adj_list.upper);
}
/**
* netdev_master_upper_dev_get - Get master upper device
* @dev: device
*
* Find a master upper device and return pointer to it or NULL in case
* it's not there. The caller must hold the RTNL lock.
*/
struct net_device *netdev_master_upper_dev_get(struct net_device *dev)
{
struct netdev_adjacent *upper;
ASSERT_RTNL();
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
if (list_empty(&dev->adj_list.upper))
return NULL;
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
upper = list_first_entry(&dev->adj_list.upper,
struct netdev_adjacent, list);
if (likely(upper->master))
return upper->dev;
return NULL;
}
EXPORT_SYMBOL(netdev_master_upper_dev_get);
/**
* netdev_has_any_lower_dev - Check if device is linked to some device
* @dev: device
*
* Find out if a device is linked to a lower device and return true in case
* it is. The caller must hold the RTNL lock.
*/
static bool netdev_has_any_lower_dev(struct net_device *dev)
{
ASSERT_RTNL();
return !list_empty(&dev->adj_list.lower);
}
void *netdev_adjacent_get_private(struct list_head *adj_list)
{
struct netdev_adjacent *adj;
adj = list_entry(adj_list, struct netdev_adjacent, list);
return adj->private;
}
EXPORT_SYMBOL(netdev_adjacent_get_private);
bonding: Fix stacked device detection in arp monitoring Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 15:20:38 -06:00
/**
* netdev_upper_get_next_dev_rcu - Get the next dev from upper list
* @dev: device
* @iter: list_head ** of the current position
*
* Gets the next device from the dev's upper list, starting from iter
* position. The caller must hold RCU read lock.
*/
struct net_device *netdev_upper_get_next_dev_rcu(struct net_device *dev,
struct list_head **iter)
{
struct netdev_adjacent *upper;
WARN_ON_ONCE(!rcu_read_lock_held() && !lockdep_rtnl_is_held());
upper = list_entry_rcu((*iter)->next, struct netdev_adjacent, list);
if (&upper->list == &dev->adj_list.upper)
return NULL;
*iter = &upper->list;
return upper->dev;
}
EXPORT_SYMBOL(netdev_upper_get_next_dev_rcu);
static struct net_device *netdev_next_upper_dev_rcu(struct net_device *dev,
struct list_head **iter)
{
struct netdev_adjacent *upper;
WARN_ON_ONCE(!rcu_read_lock_held() && !lockdep_rtnl_is_held());
upper = list_entry_rcu((*iter)->next, struct netdev_adjacent, list);
if (&upper->list == &dev->adj_list.upper)
return NULL;
*iter = &upper->list;
return upper->dev;
}
int netdev_walk_all_upper_dev_rcu(struct net_device *dev,
int (*fn)(struct net_device *dev,
void *data),
void *data)
{
struct net_device *udev;
struct list_head *iter;
int ret;
for (iter = &dev->adj_list.upper,
udev = netdev_next_upper_dev_rcu(dev, &iter);
udev;
udev = netdev_next_upper_dev_rcu(dev, &iter)) {
/* first is the upper device itself */
ret = fn(udev, data);
if (ret)
return ret;
/* then look at all of its upper devices */
ret = netdev_walk_all_upper_dev_rcu(udev, fn, data);
if (ret)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(netdev_walk_all_upper_dev_rcu);
/**
* netdev_lower_get_next_private - Get the next ->private from the
* lower neighbour list
* @dev: device
* @iter: list_head ** of the current position
*
* Gets the next netdev_adjacent->private from the dev's lower neighbour
* list, starting from iter position. The caller must hold either hold the
* RTNL lock or its own locking that guarantees that the neighbour lower
* list will remain unchanged.
*/
void *netdev_lower_get_next_private(struct net_device *dev,
struct list_head **iter)
{
struct netdev_adjacent *lower;
lower = list_entry(*iter, struct netdev_adjacent, list);
if (&lower->list == &dev->adj_list.lower)
return NULL;
*iter = lower->list.next;
return lower->private;
}
EXPORT_SYMBOL(netdev_lower_get_next_private);
/**
* netdev_lower_get_next_private_rcu - Get the next ->private from the
* lower neighbour list, RCU
* variant
* @dev: device
* @iter: list_head ** of the current position
*
* Gets the next netdev_adjacent->private from the dev's lower neighbour
* list, starting from iter position. The caller must hold RCU read lock.
*/
void *netdev_lower_get_next_private_rcu(struct net_device *dev,
struct list_head **iter)
{
struct netdev_adjacent *lower;
WARN_ON_ONCE(!rcu_read_lock_held());
lower = list_entry_rcu((*iter)->next, struct netdev_adjacent, list);
if (&lower->list == &dev->adj_list.lower)
return NULL;
*iter = &lower->list;
return lower->private;
}
EXPORT_SYMBOL(netdev_lower_get_next_private_rcu);
/**
* netdev_lower_get_next - Get the next device from the lower neighbour
* list
* @dev: device
* @iter: list_head ** of the current position
*
* Gets the next netdev_adjacent from the dev's lower neighbour
* list, starting from iter position. The caller must hold RTNL lock or
* its own locking that guarantees that the neighbour lower
* list will remain unchanged.
*/
void *netdev_lower_get_next(struct net_device *dev, struct list_head **iter)
{
struct netdev_adjacent *lower;
net: make netdev_for_each_lower_dev safe for device removal When I used netdev_for_each_lower_dev in commit bad531623253 ("vrf: remove slave queue and private slave struct") I thought that it acts like netdev_for_each_lower_private and can be used to remove the current device from the list while walking, but unfortunately it acts more like netdev_for_each_lower_private_rcu and doesn't allow it. The difference is where the "iter" points to, right now it points to the current element and that makes it impossible to remove it. Change the logic to be similar to netdev_for_each_lower_private and make it point to the "next" element so we can safely delete the current one. VRF is the only such user right now, there's no change for the read-only users. Here's what can happen now: [98423.249858] general protection fault: 0000 [#1] SMP [98423.250175] Modules linked in: vrf bridge(O) stp llc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ppdev aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd evdev serio_raw pcspkr virtio_balloon parport_pc parport i2c_piix4 i2c_core virtio_console acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 sg virtio_blk virtio_net sr_mod cdrom e1000 ata_generic ehci_pci uhci_hcd ehci_hcd usbcore usb_common virtio_pci ata_piix libata floppy virtio_ring virtio scsi_mod [last unloaded: bridge] [98423.255040] CPU: 1 PID: 14173 Comm: ip Tainted: G O 4.5.0-rc2+ #81 [98423.255386] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [98423.255777] task: ffff8800547f5540 ti: ffff88003428c000 task.ti: ffff88003428c000 [98423.256123] RIP: 0010:[<ffffffff81514f3e>] [<ffffffff81514f3e>] netdev_lower_get_next+0x1e/0x30 [98423.256534] RSP: 0018:ffff88003428f940 EFLAGS: 00010207 [98423.256766] RAX: 0002000100000004 RBX: ffff880054ff9000 RCX: 0000000000000000 [98423.257039] RDX: ffff88003428f8b8 RSI: ffff88003428f950 RDI: ffff880054ff90c0 [98423.257287] RBP: ffff88003428f940 R08: 0000000000000000 R09: 0000000000000000 [98423.257537] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003428f9e0 [98423.257802] R13: ffff880054a5fd00 R14: ffff88003428f970 R15: 0000000000000001 [98423.258055] FS: 00007f3d76881700(0000) GS:ffff88005d000000(0000) knlGS:0000000000000000 [98423.258418] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [98423.258650] CR2: 00007ffe5951ffa8 CR3: 0000000052077000 CR4: 00000000000406e0 [98423.258902] Stack: [98423.259075] ffff88003428f960 ffffffffa0442636 0002000100000004 ffff880054ff9000 [98423.259647] ffff88003428f9b0 ffffffff81518205 ffff880054ff9000 ffff88003428f978 [98423.260208] ffff88003428f978 ffff88003428f9e0 ffff88003428f9e0 ffff880035b35f00 [98423.260739] Call Trace: [98423.260920] [<ffffffffa0442636>] vrf_dev_uninit+0x76/0xa0 [vrf] [98423.261156] [<ffffffff81518205>] rollback_registered_many+0x205/0x390 [98423.261401] [<ffffffff815183ec>] unregister_netdevice_many+0x1c/0x70 [98423.261641] [<ffffffff8153223c>] rtnl_delete_link+0x3c/0x50 [98423.271557] [<ffffffff815335bb>] rtnl_dellink+0xcb/0x1d0 [98423.271800] [<ffffffff811cd7da>] ? __inc_zone_state+0x4a/0x90 [98423.272049] [<ffffffff815337b4>] rtnetlink_rcv_msg+0x84/0x200 [98423.272279] [<ffffffff810cfe7d>] ? trace_hardirqs_on+0xd/0x10 [98423.272513] [<ffffffff8153370b>] ? rtnetlink_rcv+0x1b/0x40 [98423.272755] [<ffffffff81533730>] ? rtnetlink_rcv+0x40/0x40 [98423.272983] [<ffffffff8155d6e7>] netlink_rcv_skb+0x97/0xb0 [98423.273209] [<ffffffff8153371a>] rtnetlink_rcv+0x2a/0x40 [98423.273476] [<ffffffff8155ce8b>] netlink_unicast+0x11b/0x1a0 [98423.273710] [<ffffffff8155d2f1>] netlink_sendmsg+0x3e1/0x610 [98423.273947] [<ffffffff814fbc98>] sock_sendmsg+0x38/0x70 [98423.274175] [<ffffffff814fc253>] ___sys_sendmsg+0x2e3/0x2f0 [98423.274416] [<ffffffff810d841e>] ? do_raw_spin_unlock+0xbe/0x140 [98423.274658] [<ffffffff811e1bec>] ? handle_mm_fault+0x26c/0x2210 [98423.274894] [<ffffffff811e19cd>] ? handle_mm_fault+0x4d/0x2210 [98423.275130] [<ffffffff81269611>] ? __fget_light+0x91/0xb0 [98423.275365] [<ffffffff814fcd42>] __sys_sendmsg+0x42/0x80 [98423.275595] [<ffffffff814fcd92>] SyS_sendmsg+0x12/0x20 [98423.275827] [<ffffffff81611bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a [98423.276073] Code: c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66 90 48 8b 06 55 48 81 c7 c0 00 00 00 48 89 e5 48 8b 00 48 39 f8 74 09 48 89 06 <48> 8b 40 e8 5d c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 [98423.279639] RIP [<ffffffff81514f3e>] netdev_lower_get_next+0x1e/0x30 [98423.279920] RSP <ffff88003428f940> CC: David Ahern <dsa@cumulusnetworks.com> CC: David S. Miller <davem@davemloft.net> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Vlad Yasevich <vyasevic@redhat.com> Fixes: bad531623253 ("vrf: remove slave queue and private slave struct") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 10:00:31 -07:00
lower = list_entry(*iter, struct netdev_adjacent, list);
if (&lower->list == &dev->adj_list.lower)
return NULL;
net: make netdev_for_each_lower_dev safe for device removal When I used netdev_for_each_lower_dev in commit bad531623253 ("vrf: remove slave queue and private slave struct") I thought that it acts like netdev_for_each_lower_private and can be used to remove the current device from the list while walking, but unfortunately it acts more like netdev_for_each_lower_private_rcu and doesn't allow it. The difference is where the "iter" points to, right now it points to the current element and that makes it impossible to remove it. Change the logic to be similar to netdev_for_each_lower_private and make it point to the "next" element so we can safely delete the current one. VRF is the only such user right now, there's no change for the read-only users. Here's what can happen now: [98423.249858] general protection fault: 0000 [#1] SMP [98423.250175] Modules linked in: vrf bridge(O) stp llc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ppdev aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd evdev serio_raw pcspkr virtio_balloon parport_pc parport i2c_piix4 i2c_core virtio_console acpi_cpufreq button 9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 sg virtio_blk virtio_net sr_mod cdrom e1000 ata_generic ehci_pci uhci_hcd ehci_hcd usbcore usb_common virtio_pci ata_piix libata floppy virtio_ring virtio scsi_mod [last unloaded: bridge] [98423.255040] CPU: 1 PID: 14173 Comm: ip Tainted: G O 4.5.0-rc2+ #81 [98423.255386] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [98423.255777] task: ffff8800547f5540 ti: ffff88003428c000 task.ti: ffff88003428c000 [98423.256123] RIP: 0010:[<ffffffff81514f3e>] [<ffffffff81514f3e>] netdev_lower_get_next+0x1e/0x30 [98423.256534] RSP: 0018:ffff88003428f940 EFLAGS: 00010207 [98423.256766] RAX: 0002000100000004 RBX: ffff880054ff9000 RCX: 0000000000000000 [98423.257039] RDX: ffff88003428f8b8 RSI: ffff88003428f950 RDI: ffff880054ff90c0 [98423.257287] RBP: ffff88003428f940 R08: 0000000000000000 R09: 0000000000000000 [98423.257537] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88003428f9e0 [98423.257802] R13: ffff880054a5fd00 R14: ffff88003428f970 R15: 0000000000000001 [98423.258055] FS: 00007f3d76881700(0000) GS:ffff88005d000000(0000) knlGS:0000000000000000 [98423.258418] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [98423.258650] CR2: 00007ffe5951ffa8 CR3: 0000000052077000 CR4: 00000000000406e0 [98423.258902] Stack: [98423.259075] ffff88003428f960 ffffffffa0442636 0002000100000004 ffff880054ff9000 [98423.259647] ffff88003428f9b0 ffffffff81518205 ffff880054ff9000 ffff88003428f978 [98423.260208] ffff88003428f978 ffff88003428f9e0 ffff88003428f9e0 ffff880035b35f00 [98423.260739] Call Trace: [98423.260920] [<ffffffffa0442636>] vrf_dev_uninit+0x76/0xa0 [vrf] [98423.261156] [<ffffffff81518205>] rollback_registered_many+0x205/0x390 [98423.261401] [<ffffffff815183ec>] unregister_netdevice_many+0x1c/0x70 [98423.261641] [<ffffffff8153223c>] rtnl_delete_link+0x3c/0x50 [98423.271557] [<ffffffff815335bb>] rtnl_dellink+0xcb/0x1d0 [98423.271800] [<ffffffff811cd7da>] ? __inc_zone_state+0x4a/0x90 [98423.272049] [<ffffffff815337b4>] rtnetlink_rcv_msg+0x84/0x200 [98423.272279] [<ffffffff810cfe7d>] ? trace_hardirqs_on+0xd/0x10 [98423.272513] [<ffffffff8153370b>] ? rtnetlink_rcv+0x1b/0x40 [98423.272755] [<ffffffff81533730>] ? rtnetlink_rcv+0x40/0x40 [98423.272983] [<ffffffff8155d6e7>] netlink_rcv_skb+0x97/0xb0 [98423.273209] [<ffffffff8153371a>] rtnetlink_rcv+0x2a/0x40 [98423.273476] [<ffffffff8155ce8b>] netlink_unicast+0x11b/0x1a0 [98423.273710] [<ffffffff8155d2f1>] netlink_sendmsg+0x3e1/0x610 [98423.273947] [<ffffffff814fbc98>] sock_sendmsg+0x38/0x70 [98423.274175] [<ffffffff814fc253>] ___sys_sendmsg+0x2e3/0x2f0 [98423.274416] [<ffffffff810d841e>] ? do_raw_spin_unlock+0xbe/0x140 [98423.274658] [<ffffffff811e1bec>] ? handle_mm_fault+0x26c/0x2210 [98423.274894] [<ffffffff811e19cd>] ? handle_mm_fault+0x4d/0x2210 [98423.275130] [<ffffffff81269611>] ? __fget_light+0x91/0xb0 [98423.275365] [<ffffffff814fcd42>] __sys_sendmsg+0x42/0x80 [98423.275595] [<ffffffff814fcd92>] SyS_sendmsg+0x12/0x20 [98423.275827] [<ffffffff81611bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a [98423.276073] Code: c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66 90 48 8b 06 55 48 81 c7 c0 00 00 00 48 89 e5 48 8b 00 48 39 f8 74 09 48 89 06 <48> 8b 40 e8 5d c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 [98423.279639] RIP [<ffffffff81514f3e>] netdev_lower_get_next+0x1e/0x30 [98423.279920] RSP <ffff88003428f940> CC: David Ahern <dsa@cumulusnetworks.com> CC: David S. Miller <davem@davemloft.net> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Vlad Yasevich <vyasevic@redhat.com> Fixes: bad531623253 ("vrf: remove slave queue and private slave struct") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 10:00:31 -07:00
*iter = lower->list.next;
return lower->dev;
}
EXPORT_SYMBOL(netdev_lower_get_next);
static struct net_device *netdev_next_lower_dev(struct net_device *dev,
struct list_head **iter)
{
struct netdev_adjacent *lower;
lower = list_entry((*iter)->next, struct netdev_adjacent, list);
if (&lower->list == &dev->adj_list.lower)
return NULL;
*iter = &lower->list;
return lower->dev;
}
int netdev_walk_all_lower_dev(struct net_device *dev,
int (*fn)(struct net_device *dev,
void *data),
void *data)
{
struct net_device *ldev;
struct list_head *iter;
int ret;
for (iter = &dev->adj_list.lower,
ldev = netdev_next_lower_dev(dev, &iter);
ldev;
ldev = netdev_next_lower_dev(dev, &iter)) {
/* first is the lower device itself */
ret = fn(ldev, data);
if (ret)
return ret;
/* then look at all of its lower devices */
ret = netdev_walk_all_lower_dev(ldev, fn, data);
if (ret)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(netdev_walk_all_lower_dev);
static struct net_device *netdev_next_lower_dev_rcu(struct net_device *dev,
struct list_head **iter)
{
struct netdev_adjacent *lower;
lower = list_entry_rcu((*iter)->next, struct netdev_adjacent, list);
if (&lower->list == &dev->adj_list.lower)
return NULL;
*iter = &lower->list;
return lower->dev;
}
int netdev_walk_all_lower_dev_rcu(struct net_device *dev,
int (*fn)(struct net_device *dev,
void *data),
void *data)
{
struct net_device *ldev;
struct list_head *iter;
int ret;
for (iter = &dev->adj_list.lower,
ldev = netdev_next_lower_dev_rcu(dev, &iter);
ldev;
ldev = netdev_next_lower_dev_rcu(dev, &iter)) {
/* first is the lower device itself */
ret = fn(ldev, data);
if (ret)
return ret;
/* then look at all of its lower devices */
ret = netdev_walk_all_lower_dev_rcu(ldev, fn, data);
if (ret)
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(netdev_walk_all_lower_dev_rcu);
/**
* netdev_lower_get_first_private_rcu - Get the first ->private from the
* lower neighbour list, RCU
* variant
* @dev: device
*
* Gets the first netdev_adjacent->private from the dev's lower neighbour
* list. The caller must hold RCU read lock.
*/
void *netdev_lower_get_first_private_rcu(struct net_device *dev)
{
struct netdev_adjacent *lower;
lower = list_first_or_null_rcu(&dev->adj_list.lower,
struct netdev_adjacent, list);
if (lower)
return lower->private;
return NULL;
}
EXPORT_SYMBOL(netdev_lower_get_first_private_rcu);
/**
* netdev_master_upper_dev_get_rcu - Get master upper device
* @dev: device
*
* Find a master upper device and return pointer to it or NULL in case
* it's not there. The caller must hold the RCU read lock.
*/
struct net_device *netdev_master_upper_dev_get_rcu(struct net_device *dev)
{
struct netdev_adjacent *upper;
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
upper = list_first_or_null_rcu(&dev->adj_list.upper,
struct netdev_adjacent, list);
if (upper && likely(upper->master))
return upper->dev;
return NULL;
}
EXPORT_SYMBOL(netdev_master_upper_dev_get_rcu);
static int netdev_adjacent_sysfs_add(struct net_device *dev,
struct net_device *adj_dev,
struct list_head *dev_list)
{
char linkname[IFNAMSIZ+7];
sprintf(linkname, dev_list == &dev->adj_list.upper ?
"upper_%s" : "lower_%s", adj_dev->name);
return sysfs_create_link(&(dev->dev.kobj), &(adj_dev->dev.kobj),
linkname);
}
static void netdev_adjacent_sysfs_del(struct net_device *dev,
char *name,
struct list_head *dev_list)
{
char linkname[IFNAMSIZ+7];
sprintf(linkname, dev_list == &dev->adj_list.upper ?
"upper_%s" : "lower_%s", name);
sysfs_remove_link(&(dev->dev.kobj), linkname);
}
static inline bool netdev_adjacent_is_neigh_list(struct net_device *dev,
struct net_device *adj_dev,
struct list_head *dev_list)
{
return (dev_list == &dev->adj_list.upper ||
dev_list == &dev->adj_list.lower) &&
net_eq(dev_net(dev), dev_net(adj_dev));
}
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
static int __netdev_adjacent_dev_insert(struct net_device *dev,
struct net_device *adj_dev,
struct list_head *dev_list,
void *private, bool master)
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
{
struct netdev_adjacent *adj;
int ret;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
adj = __netdev_find_adj(adj_dev, dev_list);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
if (adj) {
adj->ref_nr += 1;
pr_debug("Insert adjacency: dev %s adj_dev %s adj->ref_nr %d\n",
dev->name, adj_dev->name, adj->ref_nr);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
return 0;
}
adj = kmalloc(sizeof(*adj), GFP_KERNEL);
if (!adj)
return -ENOMEM;
adj->dev = adj_dev;
adj->master = master;
adj->ref_nr = 1;
adj->private = private;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
dev_hold(adj_dev);
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
pr_debug("Insert adjacency: dev %s adj_dev %s adj->ref_nr %d; dev_hold on %s\n",
dev->name, adj_dev->name, adj->ref_nr, adj_dev->name);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
if (netdev_adjacent_is_neigh_list(dev, adj_dev, dev_list)) {
ret = netdev_adjacent_sysfs_add(dev, adj_dev, dev_list);
if (ret)
goto free_adj;
}
/* Ensure that master link is always the first item in list. */
if (master) {
ret = sysfs_create_link(&(dev->dev.kobj),
&(adj_dev->dev.kobj), "master");
if (ret)
goto remove_symlinks;
list_add_rcu(&adj->list, dev_list);
} else {
list_add_tail_rcu(&adj->list, dev_list);
}
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
return 0;
remove_symlinks:
if (netdev_adjacent_is_neigh_list(dev, adj_dev, dev_list))
netdev_adjacent_sysfs_del(dev, adj_dev->name, dev_list);
free_adj:
kfree(adj);
dev_put(adj_dev);
return ret;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
}
static void __netdev_adjacent_dev_remove(struct net_device *dev,
struct net_device *adj_dev,
u16 ref_nr,
struct list_head *dev_list)
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
{
struct netdev_adjacent *adj;
pr_debug("Remove adjacency: dev %s adj_dev %s ref_nr %d\n",
dev->name, adj_dev->name, ref_nr);
adj = __netdev_find_adj(adj_dev, dev_list);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
if (!adj) {
pr_err("Adjacency does not exist for device %s from %s\n",
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
dev->name, adj_dev->name);
WARN_ON(1);
return;
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
}
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
if (adj->ref_nr > ref_nr) {
pr_debug("adjacency: %s to %s ref_nr - %d = %d\n",
dev->name, adj_dev->name, ref_nr,
adj->ref_nr - ref_nr);
adj->ref_nr -= ref_nr;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
return;
}
if (adj->master)
sysfs_remove_link(&(dev->dev.kobj), "master");
if (netdev_adjacent_is_neigh_list(dev, adj_dev, dev_list))
netdev_adjacent_sysfs_del(dev, adj_dev->name, dev_list);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
list_del_rcu(&adj->list);
pr_debug("adjacency: dev_put for %s, because link removed from %s to %s\n",
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
adj_dev->name, dev->name, adj_dev->name);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
dev_put(adj_dev);
kfree_rcu(adj, rcu);
}
static int __netdev_adjacent_dev_link_lists(struct net_device *dev,
struct net_device *upper_dev,
struct list_head *up_list,
struct list_head *down_list,
void *private, bool master)
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
{
int ret;
ret = __netdev_adjacent_dev_insert(dev, upper_dev, up_list,
private, master);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
if (ret)
return ret;
ret = __netdev_adjacent_dev_insert(upper_dev, dev, down_list,
private, false);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
if (ret) {
__netdev_adjacent_dev_remove(dev, upper_dev, 1, up_list);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
return ret;
}
return 0;
}
static void __netdev_adjacent_dev_unlink_lists(struct net_device *dev,
struct net_device *upper_dev,
u16 ref_nr,
struct list_head *up_list,
struct list_head *down_list)
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
{
__netdev_adjacent_dev_remove(dev, upper_dev, ref_nr, up_list);
__netdev_adjacent_dev_remove(upper_dev, dev, ref_nr, down_list);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
}
static int __netdev_adjacent_dev_link_neighbour(struct net_device *dev,
struct net_device *upper_dev,
void *private, bool master)
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
{
return __netdev_adjacent_dev_link_lists(dev, upper_dev,
&dev->adj_list.upper,
&upper_dev->adj_list.lower,
private, master);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
}
static void __netdev_adjacent_dev_unlink_neighbour(struct net_device *dev,
struct net_device *upper_dev)
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
{
__netdev_adjacent_dev_unlink_lists(dev, upper_dev, 1,
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
&dev->adj_list.upper,
&upper_dev->adj_list.lower);
}
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
static int __netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev, bool master,
void *upper_priv, void *upper_info)
{
struct netdev_notifier_changeupper_info changeupper_info;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
int ret = 0;
ASSERT_RTNL();
if (dev == upper_dev)
return -EBUSY;
/* To prevent loops, check if dev is not upper device to upper_dev. */
if (netdev_has_upper_dev(upper_dev, dev))
return -EBUSY;
if (netdev_has_upper_dev(dev, upper_dev))
return -EEXIST;
if (master && netdev_master_upper_dev_get(dev))
return -EBUSY;
changeupper_info.upper_dev = upper_dev;
changeupper_info.master = master;
changeupper_info.linking = true;
changeupper_info.upper_info = upper_info;
ret = call_netdevice_notifiers_info(NETDEV_PRECHANGEUPPER, dev,
&changeupper_info.info);
ret = notifier_to_errno(ret);
if (ret)
return ret;
ret = __netdev_adjacent_dev_link_neighbour(dev, upper_dev, upper_priv,
master);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
if (ret)
return ret;
ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev,
&changeupper_info.info);
ret = notifier_to_errno(ret);
if (ret)
goto rollback;
return 0;
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
rollback:
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
return ret;
}
/**
* netdev_upper_dev_link - Add a link to the upper device
* @dev: device
* @upper_dev: new upper device
*
* Adds a link to device which is upper to this one. The caller must hold
* the RTNL lock. On a failure a negative errno code is returned.
* On success the reference counts are adjusted and the function
* returns zero.
*/
int netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev)
{
return __netdev_upper_dev_link(dev, upper_dev, false, NULL, NULL);
}
EXPORT_SYMBOL(netdev_upper_dev_link);
/**
* netdev_master_upper_dev_link - Add a master link to the upper device
* @dev: device
* @upper_dev: new upper device
* @upper_priv: upper device private
* @upper_info: upper info to be passed down via notifier
*
* Adds a link to device which is upper to this one. In this case, only
* one master upper device can be linked, although other non-master devices
* might be linked as well. The caller must hold the RTNL lock.
* On a failure a negative errno code is returned. On success the reference
* counts are adjusted and the function returns zero.
*/
int netdev_master_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev,
void *upper_priv, void *upper_info)
{
return __netdev_upper_dev_link(dev, upper_dev, true,
upper_priv, upper_info);
}
EXPORT_SYMBOL(netdev_master_upper_dev_link);
/**
* netdev_upper_dev_unlink - Removes a link to upper device
* @dev: device
* @upper_dev: new upper device
*
* Removes a link to device which is upper to this one. The caller must hold
* the RTNL lock.
*/
void netdev_upper_dev_unlink(struct net_device *dev,
struct net_device *upper_dev)
{
struct netdev_notifier_changeupper_info changeupper_info;
ASSERT_RTNL();
changeupper_info.upper_dev = upper_dev;
changeupper_info.master = netdev_master_upper_dev_get(dev) == upper_dev;
changeupper_info.linking = false;
call_netdevice_notifiers_info(NETDEV_PRECHANGEUPPER, dev,
&changeupper_info.info);
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
net: add lower_dev_list to net_device and make a full mesh This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-28 15:25:05 -06:00
call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, dev,
&changeupper_info.info);
}
EXPORT_SYMBOL(netdev_upper_dev_unlink);
/**
* netdev_bonding_info_change - Dispatch event about slave change
* @dev: device
* @bonding_info: info to dispatch
*
* Send NETDEV_BONDING_INFO to netdev notifiers with info.
* The caller must hold the RTNL lock.
*/
void netdev_bonding_info_change(struct net_device *dev,
struct netdev_bonding_info *bonding_info)
{
struct netdev_notifier_bonding_info info;
memcpy(&info.bonding_info, bonding_info,
sizeof(struct netdev_bonding_info));
call_netdevice_notifiers_info(NETDEV_BONDING_INFO, dev,
&info.info);
}
EXPORT_SYMBOL(netdev_bonding_info_change);
static void netdev_adjacent_add_links(struct net_device *dev)
{
struct netdev_adjacent *iter;
struct net *net = dev_net(dev);
list_for_each_entry(iter, &dev->adj_list.upper, list) {
if (!net_eq(net, dev_net(iter->dev)))
continue;
netdev_adjacent_sysfs_add(iter->dev, dev,
&iter->dev->adj_list.lower);
netdev_adjacent_sysfs_add(dev, iter->dev,
&dev->adj_list.upper);
}
list_for_each_entry(iter, &dev->adj_list.lower, list) {
if (!net_eq(net, dev_net(iter->dev)))
continue;
netdev_adjacent_sysfs_add(iter->dev, dev,
&iter->dev->adj_list.upper);
netdev_adjacent_sysfs_add(dev, iter->dev,
&dev->adj_list.lower);
}
}
static void netdev_adjacent_del_links(struct net_device *dev)
{
struct netdev_adjacent *iter;
struct net *net = dev_net(dev);
list_for_each_entry(iter, &dev->adj_list.upper, list) {
if (!net_eq(net, dev_net(iter->dev)))
continue;
netdev_adjacent_sysfs_del(iter->dev, dev->name,
&iter->dev->adj_list.lower);
netdev_adjacent_sysfs_del(dev, iter->dev->name,
&dev->adj_list.upper);
}
list_for_each_entry(iter, &dev->adj_list.lower, list) {
if (!net_eq(net, dev_net(iter->dev)))
continue;
netdev_adjacent_sysfs_del(iter->dev, dev->name,
&iter->dev->adj_list.upper);
netdev_adjacent_sysfs_del(dev, iter->dev->name,
&dev->adj_list.lower);
}
}
void netdev_adjacent_rename_links(struct net_device *dev, char *oldname)
{
struct netdev_adjacent *iter;
struct net *net = dev_net(dev);
list_for_each_entry(iter, &dev->adj_list.upper, list) {
if (!net_eq(net, dev_net(iter->dev)))
continue;
netdev_adjacent_sysfs_del(iter->dev, oldname,
&iter->dev->adj_list.lower);
netdev_adjacent_sysfs_add(iter->dev, dev,
&iter->dev->adj_list.lower);
}
list_for_each_entry(iter, &dev->adj_list.lower, list) {
if (!net_eq(net, dev_net(iter->dev)))
continue;
netdev_adjacent_sysfs_del(iter->dev, oldname,
&iter->dev->adj_list.upper);
netdev_adjacent_sysfs_add(iter->dev, dev,
&iter->dev->adj_list.upper);
}
}
void *netdev_lower_dev_get_private(struct net_device *dev,
struct net_device *lower_dev)
{
struct netdev_adjacent *lower;
if (!lower_dev)
return NULL;
lower = __netdev_find_adj(lower_dev, &dev->adj_list.lower);
if (!lower)
return NULL;
return lower->private;
}
EXPORT_SYMBOL(netdev_lower_dev_get_private);
int dev_get_nest_level(struct net_device *dev)
{
struct net_device *lower = NULL;
struct list_head *iter;
int max_nest = -1;
int nest;
ASSERT_RTNL();
netdev_for_each_lower_dev(dev, lower, iter) {
nest = dev_get_nest_level(lower);
if (max_nest < nest)
max_nest = nest;
}
return max_nest + 1;
}
EXPORT_SYMBOL(dev_get_nest_level);
/**
* netdev_lower_change - Dispatch event about lower device state change
* @lower_dev: device
* @lower_state_info: state to dispatch
*
* Send NETDEV_CHANGELOWERSTATE to netdev notifiers with info.
* The caller must hold the RTNL lock.
*/
void netdev_lower_state_changed(struct net_device *lower_dev,
void *lower_state_info)
{
struct netdev_notifier_changelowerstate_info changelowerstate_info;
ASSERT_RTNL();
changelowerstate_info.lower_state_info = lower_state_info;
call_netdevice_notifiers_info(NETDEV_CHANGELOWERSTATE, lower_dev,
&changelowerstate_info.info);
}
EXPORT_SYMBOL(netdev_lower_state_changed);
int netdev_default_l2upper_neigh_construct(struct net_device *dev,
struct neighbour *n)
{
struct net_device *lower_dev, *stop_dev;
struct list_head *iter;
int err;
netdev_for_each_lower_dev(dev, lower_dev, iter) {
if (!lower_dev->netdev_ops->ndo_neigh_construct)
continue;
err = lower_dev->netdev_ops->ndo_neigh_construct(lower_dev, n);
if (err) {
stop_dev = lower_dev;
goto rollback;
}
}
return 0;
rollback:
netdev_for_each_lower_dev(dev, lower_dev, iter) {
if (lower_dev == stop_dev)
break;
if (!lower_dev->netdev_ops->ndo_neigh_destroy)
continue;
lower_dev->netdev_ops->ndo_neigh_destroy(lower_dev, n);
}
return err;
}
EXPORT_SYMBOL_GPL(netdev_default_l2upper_neigh_construct);
void netdev_default_l2upper_neigh_destroy(struct net_device *dev,
struct neighbour *n)
{
struct net_device *lower_dev;
struct list_head *iter;
netdev_for_each_lower_dev(dev, lower_dev, iter) {
if (!lower_dev->netdev_ops->ndo_neigh_destroy)
continue;
lower_dev->netdev_ops->ndo_neigh_destroy(lower_dev, n);
}
}
EXPORT_SYMBOL_GPL(netdev_default_l2upper_neigh_destroy);
static void dev_change_rx_flags(struct net_device *dev, int flags)
{
const struct net_device_ops *ops = dev->netdev_ops;
net: core: Always propagate flag changes to interfaces The following commit: b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 net: only invoke dev->change_rx_flags when device is UP tried to fix a problem with VLAN devices and promiscuouse flag setting. The issue was that VLAN device was setting a flag on an interface that was down, thus resulting in bad promiscuity count. This commit blocked flag propagation to any device that is currently down. A later commit: deede2fabe24e00bd7e246eb81cd5767dc6fcfc7 vlan: Don't propagate flag changes on down interfaces fixed VLAN code to only propagate flags when the VLAN interface is up, thus fixing the same issue as above, only localized to VLAN. The problem we have now is that if we have create a complex stack involving multiple software devices like bridges, bonds, and vlans, then it is possible that the flags would not propagate properly to the physical devices. A simple examle of the scenario is the following: eth0----> bond0 ----> bridge0 ---> vlan50 If bond0 or eth0 happen to be down at the time bond0 is added to the bridge, then eth0 will never have promisc mode set which is currently required for operation as part of the bridge. As a result, packets with vlan50 will be dropped by the interface. The only 2 devices that implement the special flag handling are VLAN and DSA and they both have required code to prevent incorrect flag propagation. As a result we can remove the generic solution introduced in b6c40d68ff6498b7f63ddf97cf0aa818d748dee7 and leave it to the individual devices to decide whether they will block flag propagation or not. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Suggested-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 18:47:15 -07:00
if (ops->ndo_change_rx_flags)
ops->ndo_change_rx_flags(dev, flags);
}
static int __dev_set_promiscuity(struct net_device *dev, int inc, bool notify)
{
unsigned int old_flags = dev->flags;
kuid_t uid;
kgid_t gid;
[NET]: Add net_device change_rx_mode callback Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:51:31 -06:00
ASSERT_RTNL();
dev->flags |= IFF_PROMISC;
dev->promiscuity += inc;
if (dev->promiscuity == 0) {
/*
* Avoid overflow.
* If inc causes overflow, untouch promisc and return error.
*/
if (inc < 0)
dev->flags &= ~IFF_PROMISC;
else {
dev->promiscuity -= inc;
pr_warn("%s: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.\n",
dev->name);
return -EOVERFLOW;
}
}
if (dev->flags != old_flags) {
pr_info("device %s %s promiscuous mode\n",
dev->name,
dev->flags & IFF_PROMISC ? "entered" : "left");
if (audit_enabled) {
current_uid_gid(&uid, &gid);
audit_log(current->audit_context, GFP_ATOMIC,
AUDIT_ANOM_PROMISCUOUS,
"dev=%s prom=%d old_prom=%d auid=%u uid=%u gid=%u ses=%u",
dev->name, (dev->flags & IFF_PROMISC),
(old_flags & IFF_PROMISC),
from_kuid(&init_user_ns, audit_get_loginuid(current)),
from_kuid(&init_user_ns, uid),
from_kgid(&init_user_ns, gid),
audit_get_sessionid(current));
}
[NET]: Add net_device change_rx_mode callback Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:51:31 -06:00
dev_change_rx_flags(dev, IFF_PROMISC);
}
if (notify)
__dev_notify_flags(dev, old_flags, IFF_PROMISC);
return 0;
}
/**
* dev_set_promiscuity - update promiscuity count on a device
* @dev: device
* @inc: modifier
*
* Add or remove promiscuity from a device. While the count in the device
* remains above zero the interface remains promiscuous. Once it hits zero
* the device reverts back to normal filtering operation. A negative inc
* value is used to drop promiscuity on the device.
* Return 0 if successful or a negative errno code on error.
*/
int dev_set_promiscuity(struct net_device *dev, int inc)
{
unsigned int old_flags = dev->flags;
int err;
err = __dev_set_promiscuity(dev, inc, true);
if (err < 0)
return err;
if (dev->flags != old_flags)
dev_set_rx_mode(dev);
return err;
}
EXPORT_SYMBOL(dev_set_promiscuity);
static int __dev_set_allmulti(struct net_device *dev, int inc, bool notify)
{
unsigned int old_flags = dev->flags, old_gflags = dev->gflags;
[NET]: Add net_device change_rx_mode callback Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:51:31 -06:00
ASSERT_RTNL();
dev->flags |= IFF_ALLMULTI;
dev->allmulti += inc;
if (dev->allmulti == 0) {
/*
* Avoid overflow.
* If inc causes overflow, untouch allmulti and return error.
*/
if (inc < 0)
dev->flags &= ~IFF_ALLMULTI;
else {
dev->allmulti -= inc;
pr_warn("%s: allmulti touches roof, set allmulti failed. allmulti feature of device might be broken.\n",
dev->name);
return -EOVERFLOW;
}
}
[NET]: Add net_device change_rx_mode callback Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:51:31 -06:00
if (dev->flags ^ old_flags) {
dev_change_rx_flags(dev, IFF_ALLMULTI);
dev_set_rx_mode(dev);
if (notify)
__dev_notify_flags(dev, old_flags,
dev->gflags ^ old_gflags);
[NET]: Add net_device change_rx_mode callback Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:51:31 -06:00
}
return 0;
}
/**
* dev_set_allmulti - update allmulti count on a device
* @dev: device
* @inc: modifier
*
* Add or remove reception of all multicast frames to a device. While the
* count in the device remains above zero the interface remains listening
* to all interfaces. Once it hits zero the device reverts back to normal
* filtering operation. A negative @inc value is used to drop the counter
* when releasing a resource needing all multicasts.
* Return 0 if successful or a negative errno code on error.
*/
int dev_set_allmulti(struct net_device *dev, int inc)
{
return __dev_set_allmulti(dev, inc, true);
}
EXPORT_SYMBOL(dev_set_allmulti);
/*
* Upload unicast and multicast address lists to device and
* configure RX filtering. When the device doesn't support unicast
* filtering it is put in promiscuous mode while unicast addresses
* are present.
*/
void __dev_set_rx_mode(struct net_device *dev)
{
const struct net_device_ops *ops = dev->netdev_ops;
/* dev_open will call this function so the list will stay sane. */
if (!(dev->flags&IFF_UP))
return;
if (!netif_device_present(dev))
return;
if (!(dev->priv_flags & IFF_UNICAST_FLT)) {
/* Unicast addresses changes may only happen under the rtnl,
* therefore calling __dev_set_promiscuity here is safe.
*/
if (!netdev_uc_empty(dev) && !dev->uc_promisc) {
__dev_set_promiscuity(dev, 1, false);
dev->uc_promisc = true;
} else if (netdev_uc_empty(dev) && dev->uc_promisc) {
__dev_set_promiscuity(dev, -1, false);
dev->uc_promisc = false;
}
}
if (ops->ndo_set_rx_mode)
ops->ndo_set_rx_mode(dev);
}
void dev_set_rx_mode(struct net_device *dev)
{
netif_addr_lock_bh(dev);
__dev_set_rx_mode(dev);
netif_addr_unlock_bh(dev);
}
/**
* dev_get_flags - get flags reported to userspace
* @dev: device
*
* Get the combination of flag bits exported through APIs to userspace.
*/
unsigned int dev_get_flags(const struct net_device *dev)
{
unsigned int flags;
flags = (dev->flags & ~(IFF_PROMISC |
IFF_ALLMULTI |
IFF_RUNNING |
IFF_LOWER_UP |
IFF_DORMANT)) |
(dev->gflags & (IFF_PROMISC |
IFF_ALLMULTI));
if (netif_running(dev)) {
if (netif_oper_up(dev))
flags |= IFF_RUNNING;
if (netif_carrier_ok(dev))
flags |= IFF_LOWER_UP;
if (netif_dormant(dev))
flags |= IFF_DORMANT;
}
return flags;
}
EXPORT_SYMBOL(dev_get_flags);
int __dev_change_flags(struct net_device *dev, unsigned int flags)
{
unsigned int old_flags = dev->flags;
int ret;
[NET]: Add net_device change_rx_mode callback Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:51:31 -06:00
ASSERT_RTNL();
/*
* Set the flags on our device.
*/
dev->flags = (flags & (IFF_DEBUG | IFF_NOTRAILERS | IFF_NOARP |
IFF_DYNAMIC | IFF_MULTICAST | IFF_PORTSEL |
IFF_AUTOMEDIA)) |
(dev->flags & (IFF_UP | IFF_VOLATILE | IFF_PROMISC |
IFF_ALLMULTI));
/*
* Load in the correct multicast list now the flags have changed.
*/
if ((old_flags ^ flags) & IFF_MULTICAST)
dev_change_rx_flags(dev, IFF_MULTICAST);
[NET]: Add net_device change_rx_mode callback Currently the set_multicast_list (and set_rx_mode) callbacks are responsible for configuring the device according to the IFF_PROMISC, IFF_MULTICAST and IFF_ALLMULTI flags and the mc_list (and uc_list in case of set_rx_mode). These callbacks can be invoked from BH context without the rtnl_mutex by dev_mc_add/dev_mc_delete, which makes reading the device flags and promiscous/allmulti count racy. For real hardware drivers that just commit all changes to the hardware this is not a real problem since the stack guarantees to call them for every change, so at least the final call will not race and commit the correct configuration to the hardware. For software devices that want to synchronize promiscous and multicast state to an underlying device however this can cause corruption of the underlying device's flags or promisc/allmulti counts. When the software device is concurrently put in promiscous or allmulti mode while set_multicast_list is invoked from bottem half context, the device might synchronize the change to the underlying device without holding the rtnl_mutex, which races with concurrent changes to the underlying device. Add a dev->change_rx_flags hook that is invoked when any of the flags that affect rx filtering change (under the rtnl_mutex), which allows drivers to perform synchronization immediately and only synchronize the address lists in set_multicast_list/set_rx_mode. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-14 19:51:31 -06:00
dev_set_rx_mode(dev);
/*
* Have we downed the interface. We handle IFF_UP ourselves
* according to user attempts to set it, rather than blindly
* setting it.
*/
ret = 0;
if ((old_flags ^ flags) & IFF_UP)
ret = ((old_flags & IFF_UP) ? __dev_close : __dev_open)(dev);
if ((flags ^ dev->gflags) & IFF_PROMISC) {
int inc = (flags & IFF_PROMISC) ? 1 : -1;
unsigned int old_flags = dev->flags;
dev->gflags ^= IFF_PROMISC;
if (__dev_set_promiscuity(dev, inc, false) >= 0)
if (dev->flags != old_flags)
dev_set_rx_mode(dev);
}
/* NOTE: order of synchronization of IFF_PROMISC and IFF_ALLMULTI
is important. Some (broken) drivers set IFF_PROMISC, when
IFF_ALLMULTI is requested not asking us and not reporting.
*/
if ((flags ^ dev->gflags) & IFF_ALLMULTI) {
int inc = (flags & IFF_ALLMULTI) ? 1 : -1;
dev->gflags ^= IFF_ALLMULTI;
__dev_set_allmulti(dev, inc, false);
}
return ret;
}
void __dev_notify_flags(struct net_device *dev, unsigned int old_flags,
unsigned int gchanges)
{
unsigned int changes = dev->flags ^ old_flags;
if (gchanges)
net: fix rtnl notification in atomic context commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:02:42 -06:00
rtmsg_ifinfo(RTM_NEWLINK, dev, gchanges, GFP_ATOMIC);
if (changes & IFF_UP) {
if (dev->flags & IFF_UP)
call_netdevice_notifiers(NETDEV_UP, dev);
else
call_netdevice_notifiers(NETDEV_DOWN, dev);
}
if (dev->flags & IFF_UP &&
(changes & ~(IFF_UP | IFF_PROMISC | IFF_ALLMULTI | IFF_VOLATILE))) {
struct netdev_notifier_change_info change_info;
change_info.flags_changed = changes;
call_netdevice_notifiers_info(NETDEV_CHANGE, dev,
&change_info.info);
}
}
/**
* dev_change_flags - change device settings
* @dev: device
* @flags: device state flags
*
* Change settings on device based state flags. The flags are
* in the userspace exported format.
*/
int dev_change_flags(struct net_device *dev, unsigned int flags)
{
int ret;
unsigned int changes, old_flags = dev->flags, old_gflags = dev->gflags;
ret = __dev_change_flags(dev, flags);
if (ret < 0)
return ret;
changes = (old_flags ^ dev->flags) | (old_gflags ^ dev->gflags);
__dev_notify_flags(dev, old_flags, changes);
return ret;
}
EXPORT_SYMBOL(dev_change_flags);
static int __dev_set_mtu(struct net_device *dev, int new_mtu)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (ops->ndo_change_mtu)
return ops->ndo_change_mtu(dev, new_mtu);
dev->mtu = new_mtu;
return 0;
}
/**
* dev_set_mtu - Change maximum transfer unit
* @dev: device
* @new_mtu: new transfer unit
*
* Change the maximum transfer size of the network device.
*/
int dev_set_mtu(struct net_device *dev, int new_mtu)
{
int err, orig_mtu;
if (new_mtu == dev->mtu)
return 0;
/* MTU must be positive, and in range */
if (new_mtu < 0 || new_mtu < dev->min_mtu) {
net_err_ratelimited("%s: Invalid MTU %d requested, hw min %d\n",
dev->name, new_mtu, dev->min_mtu);
return -EINVAL;
}
if (dev->max_mtu > 0 && new_mtu > dev->max_mtu) {
net_err_ratelimited("%s: Invalid MTU %d requested, hw max %d\n",
dev->name, new_mtu, dev->max_mtu);
return -EINVAL;
}
if (!netif_device_present(dev))
return -ENODEV;
err = call_netdevice_notifiers(NETDEV_PRECHANGEMTU, dev);
err = notifier_to_errno(err);
if (err)
return err;
orig_mtu = dev->mtu;
err = __dev_set_mtu(dev, new_mtu);
if (!err) {
err = call_netdevice_notifiers(NETDEV_CHANGEMTU, dev);
err = notifier_to_errno(err);
if (err) {
/* setting mtu back and notifying everyone again,
* so that they have a chance to revert changes.
*/
__dev_set_mtu(dev, orig_mtu);
call_netdevice_notifiers(NETDEV_CHANGEMTU, dev);
}
}
return err;
}
EXPORT_SYMBOL(dev_set_mtu);
/**
* dev_set_group - Change group this device belongs to
* @dev: device
* @new_group: group this device should belong to
*/
void dev_set_group(struct net_device *dev, int new_group)
{
dev->group = new_group;
}
EXPORT_SYMBOL(dev_set_group);
/**
* dev_set_mac_address - Change Media Access Control Address
* @dev: device
* @sa: new address
*
* Change the hardware (MAC) address of the device
*/
int dev_set_mac_address(struct net_device *dev, struct sockaddr *sa)
{
const struct net_device_ops *ops = dev->netdev_ops;
int err;
if (!ops->ndo_set_mac_address)
return -EOPNOTSUPP;
if (sa->sa_family != dev->type)
return -EINVAL;
if (!netif_device_present(dev))
return -ENODEV;
err = ops->ndo_set_mac_address(dev, sa);
if (err)
return err;
dev->addr_assign_type = NET_ADDR_SET;
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
add_device_randomness(dev->dev_addr, dev->addr_len);
return 0;
}
EXPORT_SYMBOL(dev_set_mac_address);
/**
* dev_change_carrier - Change device carrier
* @dev: device
* @new_carrier: new value
*
* Change device carrier
*/
int dev_change_carrier(struct net_device *dev, bool new_carrier)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (!ops->ndo_change_carrier)
return -EOPNOTSUPP;
if (!netif_device_present(dev))
return -ENODEV;
return ops->ndo_change_carrier(dev, new_carrier);
}
EXPORT_SYMBOL(dev_change_carrier);
/**
* dev_get_phys_port_id - Get device physical port ID
* @dev: device
* @ppid: port ID
*
* Get device physical port ID
*/
int dev_get_phys_port_id(struct net_device *dev,
struct netdev_phys_item_id *ppid)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (!ops->ndo_get_phys_port_id)
return -EOPNOTSUPP;
return ops->ndo_get_phys_port_id(dev, ppid);
}
EXPORT_SYMBOL(dev_get_phys_port_id);
/**
* dev_get_phys_port_name - Get device physical port name
* @dev: device
* @name: port name
* @len: limit of bytes to copy to name
*
* Get device physical port name
*/
int dev_get_phys_port_name(struct net_device *dev,
char *name, size_t len)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (!ops->ndo_get_phys_port_name)
return -EOPNOTSUPP;
return ops->ndo_get_phys_port_name(dev, name, len);
}
EXPORT_SYMBOL(dev_get_phys_port_name);
/**
* dev_change_proto_down - update protocol port state information
* @dev: device
* @proto_down: new value
*
* This info can be used by switch drivers to set the phys state of the
* port.
*/
int dev_change_proto_down(struct net_device *dev, bool proto_down)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (!ops->ndo_change_proto_down)
return -EOPNOTSUPP;
if (!netif_device_present(dev))
return -ENODEV;
return ops->ndo_change_proto_down(dev, proto_down);
}
EXPORT_SYMBOL(dev_change_proto_down);
/**
* dev_change_xdp_fd - set or clear a bpf program for a device rx path
* @dev: device
* @fd: new program fd or negative value to clear
* @flags: xdp-related flags
*
* Set or clear a bpf program for a device
*/
int dev_change_xdp_fd(struct net_device *dev, int fd, u32 flags)
{
const struct net_device_ops *ops = dev->netdev_ops;
struct bpf_prog *prog = NULL;
struct netdev_xdp xdp;
int err;
ASSERT_RTNL();
if (!ops->ndo_xdp)
return -EOPNOTSUPP;
if (fd >= 0) {
if (flags & XDP_FLAGS_UPDATE_IF_NOEXIST) {
memset(&xdp, 0, sizeof(xdp));
xdp.command = XDP_QUERY_PROG;
err = ops->ndo_xdp(dev, &xdp);
if (err < 0)
return err;
if (xdp.prog_attached)
return -EBUSY;
}
prog = bpf_prog_get_type(fd, BPF_PROG_TYPE_XDP);
if (IS_ERR(prog))
return PTR_ERR(prog);
}
memset(&xdp, 0, sizeof(xdp));
xdp.command = XDP_SETUP_PROG;
xdp.prog = prog;
err = ops->ndo_xdp(dev, &xdp);
if (err < 0 && prog)
bpf_prog_put(prog);
return err;
}
EXPORT_SYMBOL(dev_change_xdp_fd);
/**
* dev_new_index - allocate an ifindex
* @net: the applicable net namespace
*
* Returns a suitable unique value for a new device interface
* number. The caller must hold the rtnl semaphore or the
* dev_base_lock to be sure it remains unique.
*/
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
static int dev_new_index(struct net *net)
{
int ifindex = net->ifindex;
for (;;) {
if (++ifindex <= 0)
ifindex = 1;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
if (!__dev_get_by_index(net, ifindex))
return net->ifindex = ifindex;
}
}
/* Delayed registration/unregisteration */
static LIST_HEAD(net_todo_list);
DECLARE_WAIT_QUEUE_HEAD(netdev_unregistering_wq);
static void net_set_todo(struct net_device *dev)
{
list_add_tail(&dev->todo_list, &net_todo_list);
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
dev_net(dev)->dev_unreg_count++;
}
static void rollback_registered_many(struct list_head *head)
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
{
struct net_device *dev, *tmp;
LIST_HEAD(close_head);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
BUG_ON(dev_boot_phase);
ASSERT_RTNL();
list_for_each_entry_safe(dev, tmp, head, unreg_list) {
/* Some devices call without registering
* for initialization unwind. Remove those
* devices and proceed with the remaining.
*/
if (dev->reg_state == NETREG_UNINITIALIZED) {
pr_debug("unregister_netdevice: device %s/%p never was registered\n",
dev->name, dev);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
WARN_ON(1);
list_del(&dev->unreg_list);
continue;
}
dev->dismantle = true;
BUG_ON(dev->reg_state != NETREG_REGISTERED);
}
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
/* If device is running, close it first. */
list_for_each_entry(dev, head, unreg_list)
list_add_tail(&dev->close_list, &close_head);
dev_close_many(&close_head, true);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
list_for_each_entry(dev, head, unreg_list) {
/* And unlink it from device chain. */
unlist_netdevice(dev);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
dev->reg_state = NETREG_UNREGISTERING;
}
flush_all_backlogs();
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
synchronize_net();
list_for_each_entry(dev, head, unreg_list) {
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 14:46:24 -07:00
struct sk_buff *skb = NULL;
/* Shutdown queueing discipline. */
dev_shutdown(dev);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
/* Notify protocols, that we are about to destroy
this device. They should clean all the things.
*/
call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 14:46:24 -07:00
if (!dev->rtnl_link_ops ||
dev->rtnl_link_state == RTNL_LINK_INITIALIZED)
skb = rtmsg_ifinfo_build_skb(RTM_DELLINK, dev, ~0U,
GFP_KERNEL);
/*
* Flush the unicast and multicast chains
*/
dev_uc_flush(dev);
dev_mc_flush(dev);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
if (dev->netdev_ops->ndo_uninit)
dev->netdev_ops->ndo_uninit(dev);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
rtnetlink: delay RTM_DELLINK notification until after ndo_uninit() The commit 56bfa7ee7c ("unregister_netdevice : move RTM_DELLINK to until after ndo_uninit") tried to do this ealier but while doing so it created a problem. Unfortunately the delayed rtmsg_ifinfo() also delayed call to fill_info(). So this translated into asking driver to remove private state and then query it's private state. This could have catastropic consequences. This change breaks the rtmsg_ifinfo() into two parts - one takes the precise snapshot of the device by called fill_info() before calling the ndo_uninit() and the second part sends the notification using collected snapshot. It was brought to notice when last link is deleted from an ipvlan device when it has free-ed the port and the subsequent .fill_info() call is trying to get the info from the port. kernel: [ 255.139429] ------------[ cut here ]------------ kernel: [ 255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110() kernel: [ 255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c kernel: [ 255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167 kernel: [ 255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012 kernel: [ 255.139515] 0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0 kernel: [ 255.139516] 0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000 kernel: [ 255.139518] 00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011 kernel: [ 255.139520] Call Trace: kernel: [ 255.139527] [<ffffffff815d87f4>] dump_stack+0x46/0x58 kernel: [ 255.139531] [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0 kernel: [ 255.139540] [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20 kernel: [ 255.139544] [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110 kernel: [ 255.139547] [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0 kernel: [ 255.139549] [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0 kernel: [ 255.139551] [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110 kernel: [ 255.139553] [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240 kernel: [ 255.139557] [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80 kernel: [ 255.139558] [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20 kernel: [ 255.139562] [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0 kernel: [ 255.139563] [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40 kernel: [ 255.139565] [<ffffffff8152c398>] netlink_unicast+0x178/0x230 kernel: [ 255.139567] [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420 kernel: [ 255.139571] [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0 kernel: [ 255.139575] [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130 kernel: [ 255.139577] [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0 kernel: [ 255.139578] [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310 kernel: [ 255.139581] [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0 kernel: [ 255.139585] [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70 kernel: [ 255.139589] [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500 kernel: [ 255.139597] [<ffffffff811e8336>] ? dput+0xb6/0x190 kernel: [ 255.139606] [<ffffffff811f05f6>] ? mntput+0x26/0x40 kernel: [ 255.139611] [<ffffffff811d2b94>] ? __fput+0x174/0x1e0 kernel: [ 255.139613] [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90 kernel: [ 255.139615] [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20 kernel: [ 255.139617] [<ffffffff815df092>] system_call_fastpath+0x12/0x17 kernel: [ 255.139619] ---[ end trace 5e6703e87d984f6b ]--- Signed-off-by: Mahesh Bandewar <maheshb@google.com> Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: Eric Dumazet <edumazet@google.com> Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03 14:46:24 -07:00
if (skb)
rtmsg_ifinfo_send(skb, dev, GFP_KERNEL);
/* Notifier chain MUST detach us all upper devices. */
WARN_ON(netdev_has_any_upper_dev(dev));
WARN_ON(netdev_has_any_lower_dev(dev));
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
/* Remove entries from kobject tree */
netdev_unregister_kobject(dev);
#ifdef CONFIG_XPS
/* Remove XPS queueing entries */
netif_reset_xps_queues_gt(dev, 0);
#endif
}
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
synchronize_net();
list_for_each_entry(dev, head, unreg_list)
dev_put(dev);
}
static void rollback_registered(struct net_device *dev)
{
LIST_HEAD(single);
list_add(&dev->unreg_list, &single);
rollback_registered_many(&single);
list_del(&single);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
}
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
static netdev_features_t netdev_sync_upper_features(struct net_device *lower,
struct net_device *upper, netdev_features_t features)
{
netdev_features_t upper_disables = NETIF_F_UPPER_DISABLES;
netdev_features_t feature;
net/core: fix for_each_netdev_feature As pointed out by Nikolay and further explained by Geert, the initial for_each_netdev_feature macro was broken, as feature would get set outside of the block of code it was intended to run in, thus only ever working for the first feature bit in the mask. While less pretty this way, this is tested and confirmed functional with multiple feature bits set in NETIF_F_UPPER_DISABLES. [root@dell-per730-01 ~]# ethtool -K bond0 lro off ... [ 242.761394] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 243.552178] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 244.353978] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 245.147420] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 [root@dell-per730-01 ~]# ethtool -K bond0 gro off ... [ 251.925645] bond0: Disabling feature 0x0000000000004000 on lower dev p5p2. [ 252.713693] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 253.499085] bond0: Disabling feature 0x0000000000004000 on lower dev p5p1. [ 254.290922] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03 08:15:59 -07:00
int feature_bit;
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
net/core: fix for_each_netdev_feature As pointed out by Nikolay and further explained by Geert, the initial for_each_netdev_feature macro was broken, as feature would get set outside of the block of code it was intended to run in, thus only ever working for the first feature bit in the mask. While less pretty this way, this is tested and confirmed functional with multiple feature bits set in NETIF_F_UPPER_DISABLES. [root@dell-per730-01 ~]# ethtool -K bond0 lro off ... [ 242.761394] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 243.552178] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 244.353978] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 245.147420] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 [root@dell-per730-01 ~]# ethtool -K bond0 gro off ... [ 251.925645] bond0: Disabling feature 0x0000000000004000 on lower dev p5p2. [ 252.713693] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 253.499085] bond0: Disabling feature 0x0000000000004000 on lower dev p5p1. [ 254.290922] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03 08:15:59 -07:00
for_each_netdev_feature(&upper_disables, feature_bit) {
feature = __NETIF_F_BIT(feature_bit);
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
if (!(upper->wanted_features & feature)
&& (features & feature)) {
netdev_dbg(lower, "Dropping feature %pNF, upper dev %s has it off.\n",
&feature, upper->name);
features &= ~feature;
}
}
return features;
}
static void netdev_sync_lower_features(struct net_device *upper,
struct net_device *lower, netdev_features_t features)
{
netdev_features_t upper_disables = NETIF_F_UPPER_DISABLES;
netdev_features_t feature;
net/core: fix for_each_netdev_feature As pointed out by Nikolay and further explained by Geert, the initial for_each_netdev_feature macro was broken, as feature would get set outside of the block of code it was intended to run in, thus only ever working for the first feature bit in the mask. While less pretty this way, this is tested and confirmed functional with multiple feature bits set in NETIF_F_UPPER_DISABLES. [root@dell-per730-01 ~]# ethtool -K bond0 lro off ... [ 242.761394] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 243.552178] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 244.353978] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 245.147420] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 [root@dell-per730-01 ~]# ethtool -K bond0 gro off ... [ 251.925645] bond0: Disabling feature 0x0000000000004000 on lower dev p5p2. [ 252.713693] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 253.499085] bond0: Disabling feature 0x0000000000004000 on lower dev p5p1. [ 254.290922] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03 08:15:59 -07:00
int feature_bit;
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
net/core: fix for_each_netdev_feature As pointed out by Nikolay and further explained by Geert, the initial for_each_netdev_feature macro was broken, as feature would get set outside of the block of code it was intended to run in, thus only ever working for the first feature bit in the mask. While less pretty this way, this is tested and confirmed functional with multiple feature bits set in NETIF_F_UPPER_DISABLES. [root@dell-per730-01 ~]# ethtool -K bond0 lro off ... [ 242.761394] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 243.552178] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 244.353978] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 245.147420] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 [root@dell-per730-01 ~]# ethtool -K bond0 gro off ... [ 251.925645] bond0: Disabling feature 0x0000000000004000 on lower dev p5p2. [ 252.713693] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 253.499085] bond0: Disabling feature 0x0000000000004000 on lower dev p5p1. [ 254.290922] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 Fixes: fd867d51f ("net/core: generic support for disabling netdev features down stack") CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03 08:15:59 -07:00
for_each_netdev_feature(&upper_disables, feature_bit) {
feature = __NETIF_F_BIT(feature_bit);
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
if (!(features & feature) && (lower->features & feature)) {
netdev_dbg(upper, "Disabling feature %pNF on lower dev %s.\n",
&feature, lower->name);
lower->wanted_features &= ~feature;
netdev_update_features(lower);
if (unlikely(lower->features & feature))
netdev_WARN(upper, "failed to disable %pNF on %s!\n",
&feature, lower->name);
}
}
}
static netdev_features_t netdev_fix_features(struct net_device *dev,
netdev_features_t features)
{
/* Fix illegal checksum combinations */
if ((features & NETIF_F_HW_CSUM) &&
(features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
netdev_warn(dev, "mixed HW and IP checksum settings.\n");
features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM);
}
/* TSO requires that SG is present as well. */
if ((features & NETIF_F_ALL_TSO) && !(features & NETIF_F_SG)) {
netdev_dbg(dev, "Dropping TSO features since no SG feature.\n");
features &= ~NETIF_F_ALL_TSO;
}
if ((features & NETIF_F_TSO) && !(features & NETIF_F_HW_CSUM) &&
!(features & NETIF_F_IP_CSUM)) {
netdev_dbg(dev, "Dropping TSO features since no CSUM feature.\n");
features &= ~NETIF_F_TSO;
features &= ~NETIF_F_TSO_ECN;
}
if ((features & NETIF_F_TSO6) && !(features & NETIF_F_HW_CSUM) &&
!(features & NETIF_F_IPV6_CSUM)) {
netdev_dbg(dev, "Dropping TSO6 features since no CSUM feature.\n");
features &= ~NETIF_F_TSO6;
}
/* TSO with IPv4 ID mangling requires IPv4 TSO be enabled */
if ((features & NETIF_F_TSO_MANGLEID) && !(features & NETIF_F_TSO))
features &= ~NETIF_F_TSO_MANGLEID;
/* TSO ECN requires that TSO is present as well. */
if ((features & NETIF_F_ALL_TSO) == NETIF_F_TSO_ECN)
features &= ~NETIF_F_TSO_ECN;
/* Software GSO depends on SG. */
if ((features & NETIF_F_GSO) && !(features & NETIF_F_SG)) {
netdev_dbg(dev, "Dropping NETIF_F_GSO since no SG feature.\n");
features &= ~NETIF_F_GSO;
}
/* UFO needs SG and checksumming */
if (features & NETIF_F_UFO) {
/* maybe split UFO into V4 and V6? */
if (!(features & NETIF_F_HW_CSUM) &&
((features & (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM)) !=
(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM))) {
netdev_dbg(dev,
"Dropping NETIF_F_UFO since no checksum offload features.\n");
features &= ~NETIF_F_UFO;
}
if (!(features & NETIF_F_SG)) {
netdev_dbg(dev,
"Dropping NETIF_F_UFO since no NETIF_F_SG feature.\n");
features &= ~NETIF_F_UFO;
}
}
/* GSO partial features require GSO partial be set */
if ((features & dev->gso_partial_features) &&
!(features & NETIF_F_GSO_PARTIAL)) {
netdev_dbg(dev,
"Dropping partially supported GSO features since no GSO partial.\n");
features &= ~dev->gso_partial_features;
}
#ifdef CONFIG_NET_RX_BUSY_POLL
if (dev->netdev_ops->ndo_busy_poll)
features |= NETIF_F_BUSY_POLL;
else
#endif
features &= ~NETIF_F_BUSY_POLL;
return features;
}
int __netdev_update_features(struct net_device *dev)
{
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
struct net_device *upper, *lower;
netdev_features_t features;
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
struct list_head *iter;
int err = -1;
ASSERT_RTNL();
features = netdev_get_wanted_features(dev);
if (dev->netdev_ops->ndo_fix_features)
features = dev->netdev_ops->ndo_fix_features(dev, features);
/* driver might be less strict about feature dependencies */
features = netdev_fix_features(dev, features);
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
/* some features can't be enabled if they're off an an upper device */
netdev_for_each_upper_dev_rcu(dev, upper, iter)
features = netdev_sync_upper_features(dev, upper, features);
if (dev->features == features)
goto sync_lower;
netdev_dbg(dev, "Features changed: %pNF -> %pNF\n",
&dev->features, &features);
if (dev->netdev_ops->ndo_set_features)
err = dev->netdev_ops->ndo_set_features(dev, features);
else
err = 0;
if (unlikely(err < 0)) {
netdev_err(dev,
"set_features() failed (%d); wanted %pNF, left %pNF\n",
err, &features, &dev->features);
/* return non-0 since some features might have changed and
* it's better to fire a spurious notification than miss it
*/
return -1;
}
sync_lower:
net/core: generic support for disabling netdev features down stack There are some netdev features, which when disabled on an upper device, such as a bonding master or a bridge, must be disabled and cannot be re-enabled on underlying devices. This is a rework of an earlier more heavy-handed appraoch, which simply disables and prevents re-enabling of netdev features listed in a new define in include/net/netdev_features.h, NETIF_F_UPPER_DISABLES. Any upper device that disables a flag in that feature mask, the disabling will propagate down the stack, and any lower device that has any upper device with one of those flags disabled should not be able to enable said flag. Initially, only LRO is included for proof of concept, and because this code effectively does the same thing as dev_disable_lro(), though it will also activate from the ethtool path, which was one of the goals here. [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: on [root@dell-per730-01 ~]# ethtool -K bond0 lro off [root@dell-per730-01 ~]# ethtool -k bond0 |grep large large-receive-offload: off [root@dell-per730-01 ~]# ethtool -k p5p1 |grep large large-receive-offload: off dmesg dump: [ 1033.277986] bond0: Disabling feature 0x0000000000008000 on lower dev p5p2. [ 1034.067949] bnx2x 0000:06:00.1 p5p2: using MSI-X IRQs: sp 74 fp[0] 76 ... fp[7] 83 [ 1034.753612] bond0: Disabling feature 0x0000000000008000 on lower dev p5p1. [ 1035.591019] bnx2x 0000:06:00.0 p5p1: using MSI-X IRQs: sp 62 fp[0] 64 ... fp[7] 71 This has been successfully tested with bnx2x, qlcnic and netxen network cards as slaves in a bond interface. Turning LRO on or off on the master also turns it on or off on each of the slaves, new slaves are added with LRO in the same state as the master, and LRO can't be toggled on the slaves. Also, this should largely remove the need for dev_disable_lro(), and most, if not all, of its call sites can be replaced by simply making sure NETIF_F_LRO isn't included in the relevant device's feature flags. Note that this patch is driven by bug reports from users saying it was confusing that bonds and slaves had different settings for the same features, and while it won't be 100% in sync if a lower device doesn't support a feature like LRO, I think this is a good step in the right direction. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <gospo@cumulusnetworks.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Nikolay Aleksandrov <razor@blackwall.org> CC: Michal Kubecek <mkubecek@suse.cz> CC: Alexander Duyck <alexander.duyck@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-02 19:55:59 -07:00
/* some features must be disabled on lower devices when disabled
* on an upper device (think: bonding master or bridge)
*/
netdev_for_each_lower_dev(dev, lower, iter)
netdev_sync_lower_features(dev, lower, features);
if (!err)
dev->features = features;
return err < 0 ? 0 : 1;
}
/**
* netdev_update_features - recalculate device features
* @dev: the device to check
*
* Recalculate dev->features set and send notifications if it
* has changed. Should be called after driver or hardware dependent
* conditions might have changed that influence the features.
*/
void netdev_update_features(struct net_device *dev)
{
if (__netdev_update_features(dev))
netdev_features_change(dev);
}
EXPORT_SYMBOL(netdev_update_features);
/**
* netdev_change_features - recalculate device features
* @dev: the device to check
*
* Recalculate dev->features set and send notifications even
* if they have not changed. Should be called instead of
* netdev_update_features() if also dev->vlan_features might
* have changed to allow the changes to be propagated to stacked
* VLAN devices.
*/
void netdev_change_features(struct net_device *dev)
{
__netdev_update_features(dev);
netdev_features_change(dev);
}
EXPORT_SYMBOL(netdev_change_features);
/**
* netif_stacked_transfer_operstate - transfer operstate
* @rootdev: the root or lower level device to transfer state from
* @dev: the device to transfer operstate to
*
* Transfer operational state from root to device. This is normally
* called when a stacking relationship exists between the root
* device and the device(a leaf device).
*/
void netif_stacked_transfer_operstate(const struct net_device *rootdev,
struct net_device *dev)
{
if (rootdev->operstate == IF_OPER_DORMANT)
netif_dormant_on(dev);
else
netif_dormant_off(dev);
if (netif_carrier_ok(rootdev)) {
if (!netif_carrier_ok(dev))
netif_carrier_on(dev);
} else {
if (netif_carrier_ok(dev))
netif_carrier_off(dev);
}
}
EXPORT_SYMBOL(netif_stacked_transfer_operstate);
#ifdef CONFIG_SYSFS
static int netif_alloc_rx_queues(struct net_device *dev)
{
unsigned int i, count = dev->num_rx_queues;
struct netdev_rx_queue *rx;
size_t sz = count * sizeof(*rx);
BUG_ON(count < 1);
rx = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
if (!rx) {
rx = vzalloc(sz);
if (!rx)
return -ENOMEM;
}
dev->_rx = rx;
for (i = 0; i < count; i++)
rx[i].dev = dev;
return 0;
}
#endif
static void netdev_init_one_queue(struct net_device *dev,
struct netdev_queue *queue, void *_unused)
{
/* Initialize queue lock */
spin_lock_init(&queue->_xmit_lock);
netdev_set_xmit_lockdep_class(&queue->_xmit_lock, dev->type);
queue->xmit_lock_owner = -1;
netdev_queue_numa_node_write(queue, NUMA_NO_NODE);
queue->dev = dev;
#ifdef CONFIG_BQL
dql_init(&queue->dql, HZ);
#endif
}
static void netif_free_tx_queues(struct net_device *dev)
{
kvfree(dev->_tx);
}
static int netif_alloc_netdev_queues(struct net_device *dev)
{
unsigned int count = dev->num_tx_queues;
struct netdev_queue *tx;
size_t sz = count * sizeof(*tx);
if (count < 1 || count > 0xffff)
return -EINVAL;
tx = kzalloc(sz, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
if (!tx) {
tx = vzalloc(sz);
if (!tx)
return -ENOMEM;
}
dev->_tx = tx;
xps: Transmit Packet Steering This patch implements transmit packet steering (XPS) for multiqueue devices. XPS selects a transmit queue during packet transmission based on configuration. This is done by mapping the CPU transmitting the packet to a queue. This is the transmit side analogue to RPS-- where RPS is selecting a CPU based on receive queue, XPS selects a queue based on the CPU (previously there was an XPS patch from Eric Dumazet, but that might more appropriately be called transmit completion steering). Each transmit queue can be associated with a number of CPUs which will use the queue to send packets. This is configured as a CPU mask on a per queue basis in: /sys/class/net/eth<n>/queues/tx-<n>/xps_cpus The mappings are stored per device in an inverted data structure that maps CPUs to queues. In the netdevice structure this is an array of num_possible_cpu structures where each structure holds and array of queue_indexes for queues which that CPU can use. The benefits of XPS are improved locality in the per queue data structures. Also, transmit completions are more likely to be done nearer to the sending thread, so this should promote locality back to the socket on free (e.g. UDP). The benefits of XPS are dependent on cache hierarchy, application load, and other factors. XPS would nominally be configured so that a queue would only be shared by CPUs which are sharing a cache, the degenerative configuration woud be that each CPU has it's own queue. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. bnx2x on 16 core AMD XPS (16 queues, 1 TX queue per CPU) 1234K at 100% CPU No XPS (16 queues) 996K at 100% CPU Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-21 06:17:27 -07:00
netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL);
spin_lock_init(&dev->tx_global_lock);
return 0;
}
2015-05-11 13:17:53 -06:00
void netif_tx_stop_all_queues(struct net_device *dev)
{
unsigned int i;
for (i = 0; i < dev->num_tx_queues; i++) {
struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
netif_tx_stop_queue(txq);
}
}
EXPORT_SYMBOL(netif_tx_stop_all_queues);
/**
* register_netdevice - register a network device
* @dev: device to register
*
* Take a completed network device structure and add it to the kernel
* interfaces. A %NETDEV_REGISTER message is sent to the netdev notifier
* chain. 0 is returned on success. A negative errno code is returned
* on a failure to set up the device, or if the name is a duplicate.
*
* Callers must hold the rtnl semaphore. You may want
* register_netdev() instead of this.
*
* BUGS:
* The locking appears insufficient to guarantee two parallel registers
* will not get the same name.
*/
int register_netdevice(struct net_device *dev)
{
int ret;
struct net *net = dev_net(dev);
BUG_ON(dev_boot_phase);
ASSERT_RTNL();
might_sleep();
/* When net_device's are persistent, this will be fatal. */
BUG_ON(dev->reg_state != NETREG_UNINITIALIZED);
BUG_ON(!net);
spin_lock_init(&dev->addr_list_lock);
netdev_set_addr_lockdep_class(dev);
ret = dev_get_valid_name(net, dev, dev->name);
net:set valid name before calling ndo_init() In commit 1c5cae815d19 (net: call dev_alloc_name from register_netdevice), a bug of bonding was involved, see example 1 and 2. In register_netdevice(), the name of net_device is not valid until dev_get_valid_name() is called. But dev->netdev_ops->ndo_init(that is bond_init) is called before dev_get_valid_name(), and it uses the invalid name of net_device. I think register_netdevice() should make sure that the name of net_device is valid before calling ndo_init(). example 1: modprobe bonding ls /proc/net/bonding/bond%d ps -eLf root 3398 2 3398 0 1 21:34 ? 00:00:00 [bond%d] example 2: modprobe bonding max_bonds=3 [ 170.100292] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 170.101090] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. [ 170.102469] ------------[ cut here ]------------ [ 170.103150] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.104075] Hardware name: VirtualBox [ 170.105065] proc_dir_entry 'bonding/bond%d' already registered [ 170.105613] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.108397] Pid: 3457, comm: modprobe Not tainted 2.6.39-rc2+ #14 [ 170.108935] Call Trace: [ 170.109382] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.109911] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.110329] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.110846] [<c051a42a>] proc_register+0x126/0x157 [ 170.111870] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.112335] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.112905] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.113319] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.113848] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.114322] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.114879] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.115317] [<f94f4000>] ? 0xf94f3fff [ 170.115799] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.116879] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.117404] ---[ end trace 64e4fac3ae5fff1a ]--- [ 170.117924] bond%d: Warning: failed to register to debugfs [ 170.128728] ------------[ cut here ]------------ [ 170.129360] WARNING: at /home/pwp/net-next-2.6/fs/proc/generic.c:586 proc_register+0x126/0x157() [ 170.130323] Hardware name: VirtualBox [ 170.130797] proc_dir_entry 'bonding/bond%d' already registered [ 170.131315] Modules linked in: bonding(+) sunrpc ipv6 uinput microcode ppdev parport_pc parport joydev e1000 pcspkr i2c_piix4 i2c_core [last unloaded: bonding] [ 170.133731] Pid: 3457, comm: modprobe Tainted: G W 2.6.39-rc2+ #14 [ 170.134308] Call Trace: [ 170.134743] [<c0438f3b>] warn_slowpath_common+0x6a/0x7f [ 170.135305] [<c051a42a>] ? proc_register+0x126/0x157 [ 170.135820] [<c0438fc3>] warn_slowpath_fmt+0x2b/0x2f [ 170.137168] [<c051a42a>] proc_register+0x126/0x157 [ 170.137700] [<c051a4dd>] proc_create_data+0x82/0x98 [ 170.138174] [<f94e6af6>] bond_create_proc_entry+0x3f/0x73 [bonding] [ 170.138745] [<f94dd806>] bond_init+0x77/0xa5 [bonding] [ 170.139278] [<c0721ac6>] register_netdevice+0x8c/0x1d3 [ 170.139828] [<f94e0e30>] bond_create+0x6c/0x90 [bonding] [ 170.140361] [<f94f4763>] bonding_init+0x763/0x7b1 [bonding] [ 170.140927] [<c0401240>] do_one_initcall+0x76/0x122 [ 170.141494] [<f94f4000>] ? 0xf94f3fff [ 170.141975] [<c0463f1e>] sys_init_module+0x1286/0x140d [ 170.142463] [<c07c6d9f>] sysenter_do_call+0x12/0x28 [ 170.142974] ---[ end trace 64e4fac3ae5fff1b ]--- [ 170.144949] bond%d: Warning: failed to register to debugfs Signed-off-by: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12 09:46:56 -06:00
if (ret < 0)
goto out;
/* Init, if this function is available */
if (dev->netdev_ops->ndo_init) {
ret = dev->netdev_ops->ndo_init(dev);
if (ret) {
if (ret > 0)
ret = -EIO;
goto out;
}
}
if (((dev->hw_features | dev->features) &
NETIF_F_HW_VLAN_CTAG_FILTER) &&
(!dev->netdev_ops->ndo_vlan_rx_add_vid ||
!dev->netdev_ops->ndo_vlan_rx_kill_vid)) {
netdev_WARN(dev, "Buggy VLAN acceleration in driver!\n");
ret = -EINVAL;
goto err_uninit;
}
ret = -EBUSY;
if (!dev->ifindex)
dev->ifindex = dev_new_index(net);
else if (__dev_get_by_index(net, dev->ifindex))
goto err_uninit;
/* Transfer changeable features to wanted_features and enable
* software offloads (GSO and GRO).
*/
dev->hw_features |= NETIF_F_SOFT_FEATURES;
dev->features |= NETIF_F_SOFT_FEATURES;
dev->wanted_features = dev->features & dev->hw_features;
if (!(dev->flags & IFF_LOOPBACK))
dev->hw_features |= NETIF_F_NOCACHE_COPY;
/* If IPv4 TCP segmentation offload is supported we should also
* allow the device to enable segmenting the frame with the option
* of ignoring a static IP ID value. This doesn't enable the
* feature itself but allows the user to enable it later.
*/
if (dev->hw_features & NETIF_F_TSO)
dev->hw_features |= NETIF_F_TSO_MANGLEID;
if (dev->vlan_features & NETIF_F_TSO)
dev->vlan_features |= NETIF_F_TSO_MANGLEID;
if (dev->mpls_features & NETIF_F_TSO)
dev->mpls_features |= NETIF_F_TSO_MANGLEID;
if (dev->hw_enc_features & NETIF_F_TSO)
dev->hw_enc_features |= NETIF_F_TSO_MANGLEID;
net: Allow no-cache copy from user on transmit This patch uses __copy_from_user_nocache on transmit to bypass data cache for a performance improvement. skb_add_data_nocache and skb_copy_to_page_nocache can be called by sendmsg functions to use this feature, initial support is in tcp_sendmsg. This functionality is configurable per device using ethtool. Presumably, this feature would only be useful when the driver does not touch the data. The feature is turned on by default if a device indicates that it does some form of checksum offload; it is off by default for devices that do no checksum offload or indicate no checksum is necessary. For the former case copy-checksum is probably done anyway, in the latter case the device is likely loopback in which case the no cache copy is probably not beneficial. This patch was tested using 200 instances of netperf TCP_RR with 1400 byte request and one byte reply. Platform is 16 core AMD x86. No-cache copy disabled: 672703 tps, 97.13% utilization 50/90/99% latency:244.31 484.205 1028.41 No-cache copy enabled: 702113 tps, 96.16% utilization, 50/90/99% latency 238.56 467.56 956.955 Using 14000 byte request and response sizes demonstrate the effects more dramatically: No-cache copy disabled: 79571 tps, 34.34 %utlization 50/90/95% latency 1584.46 2319.59 5001.76 No-cache copy enabled: 83856 tps, 34.81% utilization 50/90/95% latency 2508.42 2622.62 2735.88 Note especially the effect on latency tail (95th percentile). This seems to provide a nice performance improvement and is consistent in the tests I ran. Presumably, this would provide the greatest benfits in the presence of an application workload stressing the cache and a lot of transmit data happening. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 23:30:30 -06:00
/* Make NETIF_F_HIGHDMA inheritable to VLAN devices.
*/
dev->vlan_features |= NETIF_F_HIGHDMA;
/* Make NETIF_F_SG inheritable to tunnel devices.
*/
dev->hw_enc_features |= NETIF_F_SG | NETIF_F_GSO_PARTIAL;
MPLS: Add limited GSO support In the case where a non-MPLS packet is received and an MPLS stack is added it may well be the case that the original skb is GSO but the NIC used for transmit does not support GSO of MPLS packets. The aim of this code is to provide GSO in software for MPLS packets whose skbs are GSO. SKB Usage: When an implementation adds an MPLS stack to a non-MPLS packet it should do the following to skb metadata: * Set skb->inner_protocol to the old non-MPLS ethertype of the packet. skb->inner_protocol is added by this patch. * Set skb->protocol to the new MPLS ethertype of the packet. * Set skb->network_header to correspond to the end of the L3 header, including the MPLS label stack. I have posted a patch, "[PATCH v3.29] datapath: Add basic MPLS support to kernel" which adds MPLS support to the kernel datapath of Open vSwtich. That patch sets the above requirements in datapath/actions.c:push_mpls() and was used to exercise this code. The datapath patch is against the Open vSwtich tree but it is intended that it be added to the Open vSwtich code present in the mainline Linux kernel at some point. Features: I believe that the approach that I have taken is at least partially consistent with the handling of other protocols. Jesse, I understand that you have some ideas here. I am more than happy to change my implementation. This patch adds dev->mpls_features which may be used by devices to advertise features supported for MPLS packets. A new NETIF_F_MPLS_GSO feature is added for devices which support hardware MPLS GSO offload. Currently no devices support this and MPLS GSO always falls back to software. Alternate Implementation: One possible alternate implementation is to teach netif_skb_features() and skb_network_protocol() about MPLS, in a similar way to their understanding of VLANs. I believe this would avoid the need for net/mpls/mpls_gso.c and in particular the calls to __skb_push() and __skb_push() in mpls_gso_segment(). I have decided on the implementation in this patch as it should not introduce any overhead in the case where mpls_gso is not compiled into the kernel or inserted as a module. MPLS GSO suggested by Jesse Gross. Based in part on "v4 GRE: Add TCP segmentation offload for GRE" by Pravin B Shelar. Cc: Jesse Gross <jesse@nicira.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23 15:02:52 -06:00
/* Make NETIF_F_SG inheritable to MPLS.
*/
dev->mpls_features |= NETIF_F_SG;
ret = call_netdevice_notifiers(NETDEV_POST_INIT, dev);
ret = notifier_to_errno(ret);
if (ret)
goto err_uninit;
ret = netdev_register_kobject(dev);
if (ret)
goto err_uninit;
dev->reg_state = NETREG_REGISTERED;
__netdev_update_features(dev);
/*
* Default initial state at registry is that the
* device is present.
*/
set_bit(__LINK_STATE_PRESENT, &dev->state);
net: Set device operstate at registration time The operstate of a device is initially IF_OPER_UNKNOWN and is updated asynchronously by linkwatch after each change of carrier state reported by the driver. The default carrier state of a net device is on, and this will never be changed on drivers that do not support carrier detection, thus the operstate remains IF_OPER_UNKNOWN. For devices that do support carrier detection, the driver must set the carrier state to off initially, then poll the hardware state when the device is opened. However, we must not activate linkwatch for a unregistered device, and commit b473001 ('net: Do not fire linkwatch events until the device is registered.') ensured that we don't. But this means that the operstate for many devices that support carrier detection remains IF_OPER_UNKNOWN when it should be IF_OPER_DOWN. The same issue exists with the dormant state. The proper initialisation sequence, avoiding a race with opening of the device, is: rtnl_lock(); rc = register_netdevice(dev); if (rc) goto out_unlock; netif_carrier_off(dev); /* or netif_dormant_on(dev) */ rtnl_unlock(); but it seems silly that this should have to be repeated in so many drivers. Further, the operstate seen immediately after opening the device may still be IF_OPER_UNKNOWN due to the asynchronous nature of linkwatch. Commit 22604c8 ('net: Fix for initial link state in 2.6.28') attempted to fix this by setting the operstate synchronously, but it was reverted as it could lead to deadlock. This initialises the operstate synchronously at registration time only. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-20 15:16:51 -06:00
linkwatch_init_dev(dev);
dev_init_scheduler(dev);
dev_hold(dev);
list_netdevice(dev);
add_device_randomness(dev->dev_addr, dev->addr_len);
/* If the device has permanent device address, driver should
* set dev_addr and also addr_assign_type should be set to
* NET_ADDR_PERM (default value).
*/
if (dev->addr_assign_type == NET_ADDR_PERM)
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
/* Notify protocols, that a new device appeared. */
ret = call_netdevice_notifiers(NETDEV_REGISTER, dev);
ret = notifier_to_errno(ret);
[NET]: Fix free_netdev on register_netdev failure. Point 1: The unregistering of a network device schedule a netdev_run_todo. This function calls dev->destructor when it is set and the destructor calls free_netdev. Point 2: In the case of an initialization of a network device the usual code is: * alloc_netdev * register_netdev -> if this one fails, call free_netdev and exit with error. Point 3: In the register_netdevice function at the later state, when the device is at the registered state, a call to the netdevice_notifiers is made. If one of the notification falls into an error, a rollback to the registered state is done using unregister_netdevice. Conclusion: When a network device fails to register during initialization because one network subsystem returned an error during a notification call chain, the network device is freed twice because of fact 1 and fact 2. The second free_netdev will be done with an invalid pointer. Proposed solution: The following patch move all the code of unregister_netdevice *except* the call to net_set_todo, to a new function "rollback_registered". The following functions are changed in this way: * register_netdevice: calls rollback_registered when a notification fails * unregister_netdevice: calls rollback_register + net_set_todo, the call order to net_set_todo is changed because it is the latest now. Since it justs add an element to a list that should not break anything. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-30 16:38:18 -06:00
if (ret) {
rollback_registered(dev);
dev->reg_state = NETREG_UNREGISTERED;
}
/*
* Prevent userspace races by waiting until the network
* device is fully setup before sending notifications.
*/
if (!dev->rtnl_link_ops ||
dev->rtnl_link_state == RTNL_LINK_INITIALIZED)
net: fix rtnl notification in atomic context commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:02:42 -06:00
rtmsg_ifinfo(RTM_NEWLINK, dev, ~0U, GFP_KERNEL);
out:
return ret;
err_uninit:
if (dev->netdev_ops->ndo_uninit)
dev->netdev_ops->ndo_uninit(dev);
goto out;
}
EXPORT_SYMBOL(register_netdevice);
/**
* init_dummy_netdev - init a dummy network device for NAPI
* @dev: device to init
*
* This takes a network device structure and initialize the minimum
* amount of fields so it can be used to schedule NAPI polls without
* registering a full blown interface. This is to be used by drivers
* that need to tie several hardware interfaces to a single NAPI
* poll scheduler due to HW limitations.
*/
int init_dummy_netdev(struct net_device *dev)
{
/* Clear everything. Note we don't initialize spinlocks
* are they aren't supposed to be taken by any of the
* NAPI code and this dummy netdev is supposed to be
* only ever used for NAPI polls
*/
memset(dev, 0, sizeof(struct net_device));
/* make sure we BUG if trying to hit standard
* register/unregister code path
*/
dev->reg_state = NETREG_DUMMY;
/* NAPI wants this */
INIT_LIST_HEAD(&dev->napi_list);
/* a dummy interface is started by default */
set_bit(__LINK_STATE_PRESENT, &dev->state);
set_bit(__LINK_STATE_START, &dev->state);
/* Note : We dont allocate pcpu_refcnt for dummy devices,
* because users of this 'device' dont need to change
* its refcount.
*/
return 0;
}
EXPORT_SYMBOL_GPL(init_dummy_netdev);
/**
* register_netdev - register a network device
* @dev: device to register
*
* Take a completed network device structure and add it to the kernel
* interfaces. A %NETDEV_REGISTER message is sent to the netdev notifier
* chain. 0 is returned on success. A negative errno code is returned
* on a failure to set up the device, or if the name is a duplicate.
*
* This is a wrapper around register_netdevice that takes the rtnl semaphore
* and expands the device name if you passed a format string to
* alloc_netdev.
*/
int register_netdev(struct net_device *dev)
{
int err;
rtnl_lock();
err = register_netdevice(dev);
rtnl_unlock();
return err;
}
EXPORT_SYMBOL(register_netdev);
int netdev_refcnt_read(const struct net_device *dev)
{
int i, refcnt = 0;
for_each_possible_cpu(i)
refcnt += *per_cpu_ptr(dev->pcpu_refcnt, i);
return refcnt;
}
EXPORT_SYMBOL(netdev_refcnt_read);
/**
* netdev_wait_allrefs - wait until all references are gone.
* @dev: target net_device
*
* This is called when unregistering network devices.
*
* Any protocol or device that holds a reference should register
* for netdevice notification, and cleanup and put back the
* reference if they receive an UNREGISTER event.
* We can get stuck here if buggy protocols don't correctly
* call dev_put.
*/
static void netdev_wait_allrefs(struct net_device *dev)
{
unsigned long rebroadcast_time, warning_time;
int refcnt;
linkwatch: linkwatch_forget_dev() to speedup device dismantle Herbert Xu a écrit : > On Tue, Nov 17, 2009 at 04:26:04AM -0800, David Miller wrote: >> Really, the link watch stuff is just due for a redesign. I don't >> think a simple hack is going to cut it this time, sorry Eric :-) > > I have no objections against any redesigns, but since the only > caller of linkwatch_forget_dev runs in process context with the > RTNL, it could also legally emit those events. Thanks guys, here an updated version then, before linkwatch surgery ? In this version, I force the event to be sent synchronously. [PATCH net-next-2.6] linkwatch: linkwatch_forget_dev() to speedup device dismantle time ip link del eth3.103 ; time ip link del eth3.104 ; time ip link del eth3.105 real 0m0.266s user 0m0.000s sys 0m0.001s real 0m0.770s user 0m0.000s sys 0m0.000s real 0m1.022s user 0m0.000s sys 0m0.000s One problem of current schem in vlan dismantle phase is the holding of device done by following chain : vlan_dev_stop() -> netif_carrier_off(dev) -> linkwatch_fire_event(dev) -> dev_hold() ... And __linkwatch_run_queue() runs up to one second later... A generic fix to this problem is to add a linkwatch_forget_dev() method to unlink the device from the list of watched devices. dev->link_watch_next becomes dev->link_watch_list (and use a bit more memory), to be able to unlink device in O(1). After patch : time ip link del eth3.103 ; time ip link del eth3.104 ; time ip link del eth3.105 real 0m0.024s user 0m0.000s sys 0m0.000s real 0m0.032s user 0m0.000s sys 0m0.001s real 0m0.033s user 0m0.000s sys 0m0.000s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16 22:59:21 -07:00
linkwatch_forget_dev(dev);
rebroadcast_time = warning_time = jiffies;
refcnt = netdev_refcnt_read(dev);
while (refcnt != 0) {
if (time_after(jiffies, rebroadcast_time + 1 * HZ)) {
rtnl_lock();
/* Rebroadcast unregister notification */
call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
__rtnl_unlock();
rcu_barrier();
rtnl_lock();
call_netdevice_notifiers(NETDEV_UNREGISTER_FINAL, dev);
if (test_bit(__LINK_STATE_LINKWATCH_PENDING,
&dev->state)) {
/* We must not have linkwatch events
* pending on unregister. If this
* happens, we simply run the queue
* unscheduled, resulting in a noop
* for this device.
*/
linkwatch_run_queue();
}
__rtnl_unlock();
rebroadcast_time = jiffies;
}
msleep(250);
refcnt = netdev_refcnt_read(dev);
if (time_after(jiffies, warning_time + 10 * HZ)) {
pr_emerg("unregister_netdevice: waiting for %s to become free. Usage count = %d\n",
dev->name, refcnt);
warning_time = jiffies;
}
}
}
/* The sequence is:
*
* rtnl_lock();
* ...
* register_netdevice(x1);
* register_netdevice(x2);
* ...
* unregister_netdevice(y1);
* unregister_netdevice(y2);
* ...
* rtnl_unlock();
* free_netdev(y1);
* free_netdev(y2);
*
* We are invoked by rtnl_unlock().
* This allows us to deal with problems:
* 1) We can delete sysfs objects which invoke hotplug
* without deadlocking with linkwatch via keventd.
* 2) Since we run with the RTNL semaphore not held, we can sleep
* safely in order to wait for the netdev refcnt to drop to zero.
*
* We must not return until all unregister events added during
* the interval the lock was held have been completed.
*/
void netdev_run_todo(void)
{
struct list_head list;
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
/* Wait for rcu callbacks to finish before next phase */
if (!list_empty(&list))
rcu_barrier();
while (!list_empty(&list)) {
struct net_device *dev
= list_first_entry(&list, struct net_device, todo_list);
list_del(&dev->todo_list);
rtnl_lock();
call_netdevice_notifiers(NETDEV_UNREGISTER_FINAL, dev);
__rtnl_unlock();
if (unlikely(dev->reg_state != NETREG_UNREGISTERING)) {
pr_err("network todo '%s' but state %d\n",
dev->name, dev->reg_state);
dump_stack();
continue;
}
dev->reg_state = NETREG_UNREGISTERED;
netdev_wait_allrefs(dev);
/* paranoia */
BUG_ON(netdev_refcnt_read(dev));
BUG_ON(!list_empty(&dev->ptype_all));
BUG_ON(!list_empty(&dev->ptype_specific));
WARN_ON(rcu_access_pointer(dev->ip_ptr));
WARN_ON(rcu_access_pointer(dev->ip6_ptr));
WARN_ON(dev->dn_ptr);
if (dev->destructor)
dev->destructor(dev);
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
/* Report a network device has been unregistered */
rtnl_lock();
dev_net(dev)->dev_unreg_count--;
__rtnl_unlock();
wake_up(&netdev_unregistering_wq);
/* Free network device */
kobject_put(&dev->dev.kobj);
}
}
/* Convert net_device_stats to rtnl_link_stats64. rtnl_link_stats64 has
* all the same fields in the same order as net_device_stats, with only
* the type differing, but rtnl_link_stats64 may have additional fields
* at the end for newer counters.
*/
void netdev_stats_to_stats64(struct rtnl_link_stats64 *stats64,
const struct net_device_stats *netdev_stats)
{
#if BITS_PER_LONG == 64
BUILD_BUG_ON(sizeof(*stats64) < sizeof(*netdev_stats));
memcpy(stats64, netdev_stats, sizeof(*stats64));
/* zero out counters that only exist in rtnl_link_stats64 */
memset((char *)stats64 + sizeof(*netdev_stats), 0,
sizeof(*stats64) - sizeof(*netdev_stats));
#else
size_t i, n = sizeof(*netdev_stats) / sizeof(unsigned long);
const unsigned long *src = (const unsigned long *)netdev_stats;
u64 *dst = (u64 *)stats64;
BUILD_BUG_ON(n > sizeof(*stats64) / sizeof(u64));
for (i = 0; i < n; i++)
dst[i] = src[i];
/* zero out counters that only exist in rtnl_link_stats64 */
memset((char *)stats64 + n * sizeof(u64), 0,
sizeof(*stats64) - n * sizeof(u64));
#endif
}
EXPORT_SYMBOL(netdev_stats_to_stats64);
/**
* dev_get_stats - get network device statistics
* @dev: device to get statistics from
* @storage: place to store stats
*
* Get network statistics from device. Return @storage.
* The device driver may provide its own method by setting
* dev->netdev_ops->get_stats64 or dev->netdev_ops->get_stats;
* otherwise the internal statistics structure is used.
*/
struct rtnl_link_stats64 *dev_get_stats(struct net_device *dev,
struct rtnl_link_stats64 *storage)
{
const struct net_device_ops *ops = dev->netdev_ops;
if (ops->ndo_get_stats64) {
memset(storage, 0, sizeof(*storage));
ops->ndo_get_stats64(dev, storage);
} else if (ops->ndo_get_stats) {
netdev_stats_to_stats64(storage, ops->ndo_get_stats(dev));
} else {
netdev_stats_to_stats64(storage, &dev->stats);
}
storage->rx_dropped += atomic_long_read(&dev->rx_dropped);
storage->tx_dropped += atomic_long_read(&dev->tx_dropped);
storage->rx_nohandler += atomic_long_read(&dev->rx_nohandler);
return storage;
}
EXPORT_SYMBOL(dev_get_stats);
struct netdev_queue *dev_ingress_queue_create(struct net_device *dev)
{
struct netdev_queue *queue = dev_ingress_queue(dev);
#ifdef CONFIG_NET_CLS_ACT
if (queue)
return queue;
queue = kzalloc(sizeof(*queue), GFP_KERNEL);
if (!queue)
return NULL;
netdev_init_one_queue(dev, queue, NULL);
RCU_INIT_POINTER(queue->qdisc, &noop_qdisc);
queue->qdisc_sleeping = &noop_qdisc;
rcu_assign_pointer(dev->ingress_queue, queue);
#endif
return queue;
}
static const struct ethtool_ops default_ethtool_ops;
void netdev_set_default_ethtool_ops(struct net_device *dev,
const struct ethtool_ops *ops)
{
if (dev->ethtool_ops == &default_ethtool_ops)
dev->ethtool_ops = ops;
}
EXPORT_SYMBOL_GPL(netdev_set_default_ethtool_ops);
void netdev_freemem(struct net_device *dev)
{
char *addr = (char *)dev - dev->padded;
kvfree(addr);
}
/**
* alloc_netdev_mqs - allocate network device
* @sizeof_priv: size of private data to allocate space for
* @name: device name format string
* @name_assign_type: origin of device name
* @setup: callback to initialize device
* @txqs: the number of TX subqueues to allocate
* @rxqs: the number of RX subqueues to allocate
*
* Allocates a struct net_device with private data area for driver use
* and performs basic initialization. Also allocates subqueue structs
* for each queue on the device.
*/
struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
unsigned char name_assign_type,
void (*setup)(struct net_device *),
unsigned int txqs, unsigned int rxqs)
{
struct net_device *dev;
size_t alloc_size;
struct net_device *p;
BUG_ON(strlen(name) >= sizeof(dev->name));
if (txqs < 1) {
pr_err("alloc_netdev: Unable to allocate device with zero queues\n");
return NULL;
}
#ifdef CONFIG_SYSFS
if (rxqs < 1) {
pr_err("alloc_netdev: Unable to allocate device with zero RX queues\n");
return NULL;
}
#endif
alloc_size = sizeof(struct net_device);
if (sizeof_priv) {
/* ensure 32-byte alignment of private area */
alloc_size = ALIGN(alloc_size, NETDEV_ALIGN);
alloc_size += sizeof_priv;
}
/* ensure 32-byte alignment of whole construct */
alloc_size += NETDEV_ALIGN - 1;
p = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN | __GFP_REPEAT);
if (!p)
p = vzalloc(alloc_size);
if (!p)
return NULL;
dev = PTR_ALIGN(p, NETDEV_ALIGN);
dev->padded = (char *)dev - (char *)p;
dev->pcpu_refcnt = alloc_percpu(int);
if (!dev->pcpu_refcnt)
goto free_dev;
if (dev_addr_init(dev))
goto free_pcpu;
dev_mc_init(dev);
dev_uc_init(dev);
dev_net_set(dev, &init_net);
dev->gso_max_size = GSO_MAX_SIZE;
dev->gso_max_segs = GSO_MAX_SEGS;
INIT_LIST_HEAD(&dev->napi_list);
INIT_LIST_HEAD(&dev->unreg_list);
INIT_LIST_HEAD(&dev->close_list);
INIT_LIST_HEAD(&dev->link_watch_list);
net: add adj_list to save only neighbours Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 01:20:07 -06:00
INIT_LIST_HEAD(&dev->adj_list.upper);
INIT_LIST_HEAD(&dev->adj_list.lower);
INIT_LIST_HEAD(&dev->ptype_all);
INIT_LIST_HEAD(&dev->ptype_specific);
#ifdef CONFIG_NET_SCHED
hash_init(dev->qdisc_hash);
#endif
dev->priv_flags = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM;
setup(dev);
if (!dev->tx_queue_len) {
dev->priv_flags |= IFF_NO_QUEUE;
net/qdisc: IFF_NO_QUEUE drivers should use consistent TX queue len The flag IFF_NO_QUEUE marks virtual device drivers that doesn't need a default qdisc attached, given they will be backed by physical device, that already have a qdisc attached for pushback. It is still supported to attach a qdisc to a IFF_NO_QUEUE device, as this can be useful for difference policy reasons (e.g. bandwidth limiting containers). For this to work, the tx_queue_len need to have a sane value, because some qdiscs inherit/copy the tx_queue_len (namely, pfifo, bfifo, gred, htb, plug and sfb). Commit a813104d9233 ("IFF_NO_QUEUE: Fix for drivers not calling ether_setup()") caught situations where some drivers didn't initialize tx_queue_len. The problem with the commit was choosing 1 as the fallback value. A qdisc queue length of 1 causes more harm than good, because it creates hard to debug situations for userspace. It gives userspace a false sense of a working config after attaching a qdisc. As low volume traffic (that doesn't activate the qdisc policy) works, like ping, while traffic that e.g. needs shaping cannot reach the configured policy levels, given the queue length is too small. This patch change the value to DEFAULT_TX_QUEUE_LEN, given other IFF_NO_QUEUE devices (that call ether_setup()) also use this value. Fixes: a813104d9233 ("IFF_NO_QUEUE: Fix for drivers not calling ether_setup()") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03 07:56:06 -06:00
dev->tx_queue_len = DEFAULT_TX_QUEUE_LEN;
}
dev->num_tx_queues = txqs;
dev->real_num_tx_queues = txqs;
if (netif_alloc_netdev_queues(dev))
goto free_all;
#ifdef CONFIG_SYSFS
dev->num_rx_queues = rxqs;
dev->real_num_rx_queues = rxqs;
if (netif_alloc_rx_queues(dev))
goto free_all;
#endif
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
strcpy(dev->name, name);
dev->name_assign_type = name_assign_type;
dev->group = INIT_NETDEV_GROUP;
if (!dev->ethtool_ops)
dev->ethtool_ops = &default_ethtool_ops;
netfilter: add netfilter ingress hook after handle_ing() under unique static key This patch adds the Netfilter ingress hook just after the existing tc ingress hook, that seems to be the consensus solution for this. Note that the Netfilter hook resides under the global static key that enables ingress filtering. Nonetheless, Netfilter still also has its own static key for minimal impact on the existing handle_ing(). * Without this patch: Result: OK: 6216490(c6216338+d152) usec, 100000000 (60byte,0frags) 16086246pps 7721Mb/sec (7721398080bps) errors: 100000000 42.46% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 25.92% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.81% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.62% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.70% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.34% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.44% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch: Result: OK: 6214833(c6214731+d101) usec, 100000000 (60byte,0frags) 16090536pps 7723Mb/sec (7723457280bps) errors: 100000000 41.23% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 26.57% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 7.72% kpktgend_0 [pktgen] [k] pktgen_thread_worker 5.55% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.78% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 2.06% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 1.43% kpktgend_0 [kernel.kallsyms] [k] __build_skb * Without this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9269001(c9268821+d179) usec, 100000000 (60byte,0frags) 10788648pps 5178Mb/sec (5178551040bps) errors: 100000000 40.99% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.50% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.77% kpktgend_0 [cls_u32] [k] u32_classify 5.62% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.18% kpktgend_0 [pktgen] [k] pktgen_thread_worker 3.23% kpktgend_0 [kernel.kallsyms] [k] tc_classify 2.97% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 1.83% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.50% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk 0.99% kpktgend_0 [kernel.kallsyms] [k] __build_skb * With this patch + tc ingress: tc filter add dev eth4 parent ffff: protocol ip prio 1 \ u32 match ip dst 4.3.2.1/32 Result: OK: 9308218(c9308091+d126) usec, 100000000 (60byte,0frags) 10743194pps 5156Mb/sec (5156733120bps) errors: 100000000 42.01% kpktgend_0 [kernel.kallsyms] [k] __netif_receive_skb_core 17.78% kpktgend_0 [kernel.kallsyms] [k] kfree_skb 11.70% kpktgend_0 [cls_u32] [k] u32_classify 5.46% kpktgend_0 [kernel.kallsyms] [k] tc_classify_compat 5.16% kpktgend_0 [pktgen] [k] pktgen_thread_worker 2.98% kpktgend_0 [kernel.kallsyms] [k] ip_rcv 2.84% kpktgend_0 [kernel.kallsyms] [k] tc_classify 1.96% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_internal 1.57% kpktgend_0 [kernel.kallsyms] [k] netif_receive_skb_sk Note that the results are very similar before and after. I can see gcc gets the code under the ingress static key out of the hot path. Then, on that cold branch, it generates the code to accomodate the netfilter ingress static key. My explanation for this is that this reduces the pressure on the instruction cache for non-users as the new code is out of the hot path, and it comes with minimal impact for tc ingress users. Using gcc version 4.8.4 on: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 8 [...] L1d cache: 16K L1i cache: 64K L2 cache: 2048K L3 cache: 8192K Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13 10:19:38 -06:00
nf_hook_ingress_init(dev);
return dev;
free_all:
free_netdev(dev);
return NULL;
free_pcpu:
free_percpu(dev->pcpu_refcnt);
free_dev:
netdev_freemem(dev);
return NULL;
}
EXPORT_SYMBOL(alloc_netdev_mqs);
/**
* free_netdev - free network device
* @dev: device
*
* This function does the last stage of destroying an allocated device
* interface. The reference to the device object is released.
* If this is the last reference then it will be freed.
* Must be called in process context.
*/
void free_netdev(struct net_device *dev)
{
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
struct napi_struct *p, *n;
might_sleep();
netif_free_tx_queues(dev);
#ifdef CONFIG_SYSFS
kvfree(dev->_rx);
#endif
kfree(rcu_dereference_protected(dev->ingress_queue, 1));
/* Flush device addresses */
dev_addr_flush(dev);
net: Add Generic Receive Offload infrastructure This patch adds the top-level GRO (Generic Receive Offload) infrastructure. This is pretty similar to LRO except that this is protocol-independent. Instead of holding packets in an lro_mgr structure, they're now held in napi_struct. For drivers that intend to use this, they can set the NETIF_F_GRO bit and call napi_gro_receive instead of netif_receive_skb or just call netif_rx. The latter will call napi_receive_skb automatically. When napi_gro_receive is used, the driver must either call napi_complete/napi_rx_complete, or call napi_gro_flush in softirq context if the driver uses the primitives __napi_complete/__napi_rx_complete. Protocols will set the gro_receive and gro_complete function pointers in order to participate in this scheme. In addition to the packet, gro_receive will get a list of currently held packets. Each packet in the list has a same_flow field which is non-zero if it is a potential match for the new packet. For each packet that may match, they also have a flush field which is non-zero if the held packet must not be merged with the new packet. Once gro_receive has determined that the new skb matches a held packet, the held packet may be processed immediately if the new skb cannot be merged with it. In this case gro_receive should return the pointer to the existing skb in gro_list. Otherwise the new skb should be merged into the existing packet and NULL should be returned, unless the new skb makes it impossible for any further merges to be made (e.g., FIN packet) where the merged skb should be returned. Whenever the skb is merged into an existing entry, the gro_receive function should set NAPI_GRO_CB(skb)->same_flow. Note that if an skb merely matches an existing entry but can't be merged with it, then this shouldn't be set. If gro_receive finds it pointless to hold the new skb for future merging, it should set NAPI_GRO_CB(skb)->flush. Held packets will be flushed by napi_gro_flush which is called by napi_complete and napi_rx_complete. Currently held packets are stored in a singly liked list just like LRO. The list is limited to a maximum of 8 entries. In future, this may be expanded to use a hash table to allow more flows to be held for merging. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16 00:38:52 -07:00
list_for_each_entry_safe(p, n, &dev->napi_list, dev_list)
netif_napi_del(p);
free_percpu(dev->pcpu_refcnt);
dev->pcpu_refcnt = NULL;
/* Compatibility with error handling in drivers */
if (dev->reg_state == NETREG_UNINITIALIZED) {
netdev_freemem(dev);
return;
}
BUG_ON(dev->reg_state != NETREG_UNREGISTERED);
dev->reg_state = NETREG_RELEASED;
/* will free via device release */
put_device(&dev->dev);
}
EXPORT_SYMBOL(free_netdev);
/**
* synchronize_net - Synchronize with packet receive processing
*
* Wait for packets currently being received to be done.
* Does not block later packets from starting.
*/
void synchronize_net(void)
{
might_sleep();
net: use synchronize_rcu_expedited() synchronize_rcu() is very slow in various situations (HZ=100, CONFIG_NO_HZ=y, CONFIG_PREEMPT=n) Extract from my (mostly idle) 8 core machine : synchronize_rcu() in 99985 us synchronize_rcu() in 79982 us synchronize_rcu() in 87612 us synchronize_rcu() in 79827 us synchronize_rcu() in 109860 us synchronize_rcu() in 98039 us synchronize_rcu() in 89841 us synchronize_rcu() in 79842 us synchronize_rcu() in 80151 us synchronize_rcu() in 119833 us synchronize_rcu() in 99858 us synchronize_rcu() in 73999 us synchronize_rcu() in 79855 us synchronize_rcu() in 79853 us When we hold RTNL mutex, we would like to spend some cpu cycles but not block too long other processes waiting for this mutex. We also want to setup/dismantle network features as fast as possible at boot/shutdown time. This patch makes synchronize_net() call the expedited version if RTNL is locked. synchronize_rcu_expedited() typical delay is about 20 us on my machine. synchronize_rcu_expedited() in 18 us synchronize_rcu_expedited() in 18 us synchronize_rcu_expedited() in 18 us synchronize_rcu_expedited() in 18 us synchronize_rcu_expedited() in 20 us synchronize_rcu_expedited() in 16 us synchronize_rcu_expedited() in 20 us synchronize_rcu_expedited() in 18 us synchronize_rcu_expedited() in 18 us Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> CC: Ben Greear <greearb@candelatech.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-23 17:07:32 -06:00
if (rtnl_is_locked())
synchronize_rcu_expedited();
else
synchronize_rcu();
}
EXPORT_SYMBOL(synchronize_net);
/**
* unregister_netdevice_queue - remove device from the kernel
* @dev: device
* @head: list
*
* This function shuts down a device interface and removes it
* from the kernel tables.
* If head not NULL, device is queued to be unregistered later.
*
* Callers must hold the rtnl semaphore. You may want
* unregister_netdev() instead of this.
*/
void unregister_netdevice_queue(struct net_device *dev, struct list_head *head)
{
ASSERT_RTNL();
if (head) {
list_move_tail(&dev->unreg_list, head);
} else {
rollback_registered(dev);
/* Finish processing unregister after unlock */
net_set_todo(dev);
}
}
EXPORT_SYMBOL(unregister_netdevice_queue);
/**
* unregister_netdevice_many - unregister many devices
* @head: list of devices
*
* Note: As most callers use a stack allocated list_head,
* we force a list_del() to make sure stack wont be corrupted later.
*/
void unregister_netdevice_many(struct list_head *head)
{
struct net_device *dev;
if (!list_empty(head)) {
rollback_registered_many(head);
list_for_each_entry(dev, head, unreg_list)
net_set_todo(dev);
list_del(head);
}
}
EXPORT_SYMBOL(unregister_netdevice_many);
/**
* unregister_netdev - remove device from the kernel
* @dev: device
*
* This function shuts down a device interface and removes it
* from the kernel tables.
*
* This is just a wrapper for unregister_netdevice that takes
* the rtnl semaphore. In general you want to use this and not
* unregister_netdevice.
*/
void unregister_netdev(struct net_device *dev)
{
rtnl_lock();
unregister_netdevice(dev);
rtnl_unlock();
}
EXPORT_SYMBOL(unregister_netdev);
/**
* dev_change_net_namespace - move device to different nethost namespace
* @dev: device
* @net: network namespace
* @pat: If not NULL name pattern to try if the current device name
* is already taken in the destination network namespace.
*
* This function shuts down a device interface and moves it
* to a new network namespace. On success 0 is returned, on
* a failure a netagive errno code is returned.
*
* Callers must hold the rtnl semaphore.
*/
int dev_change_net_namespace(struct net_device *dev, struct net *net, const char *pat)
{
int err;
ASSERT_RTNL();
/* Don't allow namespace local devices to be moved. */
err = -EINVAL;
if (dev->features & NETIF_F_NETNS_LOCAL)
goto out;
/* Ensure the device has been registrered */
if (dev->reg_state != NETREG_REGISTERED)
goto out;
/* Get out if there is nothing todo */
err = 0;
if (net_eq(dev_net(dev), net))
goto out;
/* Pick the destination device name, and ensure
* we can use it in the destination network namespace.
*/
err = -EEXIST;
if (__dev_get_by_name(net, dev->name)) {
/* We get here if we can't use the current device name */
if (!pat)
goto out;
if (dev_get_valid_name(net, dev, pat) < 0)
goto out;
}
/*
* And now a mini version of register_netdevice unregister_netdevice.
*/
/* If device is running close it first. */
dev_close(dev);
/* And unlink it from device chain */
err = -ENODEV;
unlist_netdevice(dev);
synchronize_net();
/* Shutdown queueing discipline. */
dev_shutdown(dev);
/* Notify protocols, that we are about to destroy
this device. They should clean all the things.
Note that dev->reg_state stays at NETREG_REGISTERED.
This is wanted because this way 8021q and macvlan know
the device is just moving and can keep their slaves up.
*/
call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
rcu_barrier();
call_netdevice_notifiers(NETDEV_UNREGISTER_FINAL, dev);
net: fix rtnl notification in atomic context commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:02:42 -06:00
rtmsg_ifinfo(RTM_DELLINK, dev, ~0U, GFP_KERNEL);
/*
* Flush the unicast and multicast chains
*/
dev_uc_flush(dev);
dev_mc_flush(dev);
net: dev_change_net_namespace: send a KOBJ_REMOVED/KOBJ_ADD When a new nic is created in namespace ns1, the kernel sends a KOBJ_ADD uevent to ns1. When the nic is moved to ns2, we only send a KOBJ_MOVE to ns2, and nothing to ns1. This patch changes that behavior so that when moving a nic from ns1 to ns2, we send a KOBJ_REMOVED to ns1 and KOBJ_ADD to ns2. (The KOBJ_MOVE is still sent to ns2). The effects of this can be seen when starting and stopping containers in an upstart based host. Lxc will create a pair of veth nics, the kernel sends KOBJ_ADD, and upstart starts network-instance jobs for each. When one nic is moved to the container, because no KOBJ_REMOVED event is received, the network-instance job for that veth never goes away. This was reported at https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1065589 With this patch the networ-instance jobs properly go away. The other oddness solved here is that if a nic is passed into a running upstart-based container, without this patch no network-instance job is started in the container. But when the container creates a new nic itself (ip link add new type veth) then network-interface jobs are created. With this patch, behavior comes in line with a regular host. v2: also send KOBJ_ADD to new netns. There will then be a _MOVE event from the device_rename() call, but that should be innocuous. Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 09:17:12 -07:00
/* Send a netdev-removed uevent to the old namespace */
kobject_uevent(&dev->dev.kobj, KOBJ_REMOVE);
netdev_adjacent_del_links(dev);
net: dev_change_net_namespace: send a KOBJ_REMOVED/KOBJ_ADD When a new nic is created in namespace ns1, the kernel sends a KOBJ_ADD uevent to ns1. When the nic is moved to ns2, we only send a KOBJ_MOVE to ns2, and nothing to ns1. This patch changes that behavior so that when moving a nic from ns1 to ns2, we send a KOBJ_REMOVED to ns1 and KOBJ_ADD to ns2. (The KOBJ_MOVE is still sent to ns2). The effects of this can be seen when starting and stopping containers in an upstart based host. Lxc will create a pair of veth nics, the kernel sends KOBJ_ADD, and upstart starts network-instance jobs for each. When one nic is moved to the container, because no KOBJ_REMOVED event is received, the network-instance job for that veth never goes away. This was reported at https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1065589 With this patch the networ-instance jobs properly go away. The other oddness solved here is that if a nic is passed into a running upstart-based container, without this patch no network-instance job is started in the container. But when the container creates a new nic itself (ip link add new type veth) then network-interface jobs are created. With this patch, behavior comes in line with a regular host. v2: also send KOBJ_ADD to new netns. There will then be a _MOVE event from the device_rename() call, but that should be innocuous. Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 09:17:12 -07:00
/* Actually switch the network namespace */
dev_net_set(dev, net);
/* If there is an ifindex conflict assign a new one */
if (__dev_get_by_index(net, dev->ifindex))
dev->ifindex = dev_new_index(net);
net: dev_change_net_namespace: send a KOBJ_REMOVED/KOBJ_ADD When a new nic is created in namespace ns1, the kernel sends a KOBJ_ADD uevent to ns1. When the nic is moved to ns2, we only send a KOBJ_MOVE to ns2, and nothing to ns1. This patch changes that behavior so that when moving a nic from ns1 to ns2, we send a KOBJ_REMOVED to ns1 and KOBJ_ADD to ns2. (The KOBJ_MOVE is still sent to ns2). The effects of this can be seen when starting and stopping containers in an upstart based host. Lxc will create a pair of veth nics, the kernel sends KOBJ_ADD, and upstart starts network-instance jobs for each. When one nic is moved to the container, because no KOBJ_REMOVED event is received, the network-instance job for that veth never goes away. This was reported at https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1065589 With this patch the networ-instance jobs properly go away. The other oddness solved here is that if a nic is passed into a running upstart-based container, without this patch no network-instance job is started in the container. But when the container creates a new nic itself (ip link add new type veth) then network-interface jobs are created. With this patch, behavior comes in line with a regular host. v2: also send KOBJ_ADD to new netns. There will then be a _MOVE event from the device_rename() call, but that should be innocuous. Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 09:17:12 -07:00
/* Send a netdev-add uevent to the new namespace */
kobject_uevent(&dev->dev.kobj, KOBJ_ADD);
netdev_adjacent_add_links(dev);
net: dev_change_net_namespace: send a KOBJ_REMOVED/KOBJ_ADD When a new nic is created in namespace ns1, the kernel sends a KOBJ_ADD uevent to ns1. When the nic is moved to ns2, we only send a KOBJ_MOVE to ns2, and nothing to ns1. This patch changes that behavior so that when moving a nic from ns1 to ns2, we send a KOBJ_REMOVED to ns1 and KOBJ_ADD to ns2. (The KOBJ_MOVE is still sent to ns2). The effects of this can be seen when starting and stopping containers in an upstart based host. Lxc will create a pair of veth nics, the kernel sends KOBJ_ADD, and upstart starts network-instance jobs for each. When one nic is moved to the container, because no KOBJ_REMOVED event is received, the network-instance job for that veth never goes away. This was reported at https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1065589 With this patch the networ-instance jobs properly go away. The other oddness solved here is that if a nic is passed into a running upstart-based container, without this patch no network-instance job is started in the container. But when the container creates a new nic itself (ip link add new type veth) then network-interface jobs are created. With this patch, behavior comes in line with a regular host. v2: also send KOBJ_ADD to new netns. There will then be a _MOVE event from the device_rename() call, but that should be innocuous. Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03 09:17:12 -07:00
/* Fixup kobjects */
err = device_rename(&dev->dev, dev->name);
WARN_ON(err);
/* Add the device back in the hashes */
list_netdevice(dev);
/* Notify protocols, that a new device appeared. */
call_netdevice_notifiers(NETDEV_REGISTER, dev);
/*
* Prevent userspace races by waiting until the network
* device is fully setup before sending notifications.
*/
net: fix rtnl notification in atomic context commit 991fb3f74c "dev: always advertise rx_flags changes via netlink" introduced rtnl notification from __dev_set_promiscuity(), which can be called in atomic context. Steps to reproduce: ip tuntap add dev tap1 mode tap ifconfig tap1 up tcpdump -nei tap1 & ip tuntap del dev tap1 mode tap [ 271.627994] device tap1 left promiscuous mode [ 271.639897] BUG: sleeping function called from invalid context at mm/slub.c:940 [ 271.664491] in_atomic(): 1, irqs_disabled(): 0, pid: 3394, name: ip [ 271.677525] INFO: lockdep is turned off. [ 271.690503] CPU: 0 PID: 3394 Comm: ip Tainted: G W 3.12.0-rc3+ #73 [ 271.703996] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 271.731254] ffffffff81a58506 ffff8807f0d57a58 ffffffff817544e5 ffff88082fa0f428 [ 271.760261] ffff8808071f5f40 ffff8807f0d57a88 ffffffff8108bad1 ffffffff81110ff8 [ 271.790683] 0000000000000010 00000000000000d0 00000000000000d0 ffff8807f0d57af8 [ 271.822332] Call Trace: [ 271.838234] [<ffffffff817544e5>] dump_stack+0x55/0x76 [ 271.854446] [<ffffffff8108bad1>] __might_sleep+0x181/0x240 [ 271.870836] [<ffffffff81110ff8>] ? rcu_irq_exit+0x68/0xb0 [ 271.887076] [<ffffffff811a80be>] kmem_cache_alloc_node+0x4e/0x2a0 [ 271.903368] [<ffffffff810b4ddc>] ? vprintk_emit+0x1dc/0x5a0 [ 271.919716] [<ffffffff81614d67>] ? __alloc_skb+0x57/0x2a0 [ 271.936088] [<ffffffff810b4de0>] ? vprintk_emit+0x1e0/0x5a0 [ 271.952504] [<ffffffff81614d67>] __alloc_skb+0x57/0x2a0 [ 271.968902] [<ffffffff8163a0b2>] rtmsg_ifinfo+0x52/0x100 [ 271.985302] [<ffffffff8162ac6d>] __dev_notify_flags+0xad/0xc0 [ 272.001642] [<ffffffff8162ad0c>] __dev_set_promiscuity+0x8c/0x1c0 [ 272.017917] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.033961] [<ffffffff8162b109>] dev_set_promiscuity+0x29/0x50 [ 272.049855] [<ffffffff8172e937>] packet_dev_mc+0x87/0xc0 [ 272.065494] [<ffffffff81732052>] packet_notifier+0x1b2/0x380 [ 272.080915] [<ffffffff81731ea5>] ? packet_notifier+0x5/0x380 [ 272.096009] [<ffffffff81761c66>] notifier_call_chain+0x66/0x150 [ 272.110803] [<ffffffff8108503e>] __raw_notifier_call_chain+0xe/0x10 [ 272.125468] [<ffffffff81085056>] raw_notifier_call_chain+0x16/0x20 [ 272.139984] [<ffffffff81620190>] call_netdevice_notifiers_info+0x40/0x70 [ 272.154523] [<ffffffff816201d6>] call_netdevice_notifiers+0x16/0x20 [ 272.168552] [<ffffffff816224c5>] rollback_registered_many+0x145/0x240 [ 272.182263] [<ffffffff81622641>] rollback_registered+0x31/0x40 [ 272.195369] [<ffffffff816229c8>] unregister_netdevice_queue+0x58/0x90 [ 272.208230] [<ffffffff81547ca0>] __tun_detach+0x140/0x340 [ 272.220686] [<ffffffff81547ed6>] tun_chr_close+0x36/0x60 Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23 17:02:42 -06:00
rtmsg_ifinfo(RTM_NEWLINK, dev, ~0U, GFP_KERNEL);
synchronize_net();
err = 0;
out:
return err;
}
EXPORT_SYMBOL_GPL(dev_change_net_namespace);
static int dev_cpu_dead(unsigned int oldcpu)
{
struct sk_buff **list_skb;
struct sk_buff *skb;
unsigned int cpu;
struct softnet_data *sd, *oldsd;
local_irq_disable();
cpu = smp_processor_id();
sd = &per_cpu(softnet_data, cpu);
oldsd = &per_cpu(softnet_data, oldcpu);
/* Find end of our completion_queue. */
list_skb = &sd->completion_queue;
while (*list_skb)
list_skb = &(*list_skb)->next;
/* Append completion queue from offline CPU. */
*list_skb = oldsd->completion_queue;
oldsd->completion_queue = NULL;
/* Append output queue from offline CPU. */
if (oldsd->output_queue) {
*sd->output_queue_tailp = oldsd->output_queue;
sd->output_queue_tailp = oldsd->output_queue_tailp;
oldsd->output_queue = NULL;
oldsd->output_queue_tailp = &oldsd->output_queue;
}
/* Append NAPI poll list from offline CPU, with one exception :
* process_backlog() must be called by cpu owning percpu backlog.
* We properly handle process_queue & input_pkt_queue later.
*/
while (!list_empty(&oldsd->poll_list)) {
struct napi_struct *napi = list_first_entry(&oldsd->poll_list,
struct napi_struct,
poll_list);
list_del_init(&napi->poll_list);
if (napi->poll == process_backlog)
napi->state = 0;
else
____napi_schedule(sd, napi);
}
raise_softirq_irqoff(NET_TX_SOFTIRQ);
local_irq_enable();
/* Process offline CPU's input_pkt_queue */
while ((skb = __skb_dequeue(&oldsd->process_queue))) {
netif_rx_ni(skb);
input_queue_head_incr(oldsd);
rfs: Receive Flow Steering This patch implements receive flow steering (RFS). RFS steers received packets for layer 3 and 4 processing to the CPU where the application for the corresponding flow is running. RFS is an extension of Receive Packet Steering (RPS). The basic idea of RFS is that when an application calls recvmsg (or sendmsg) the application's running CPU is stored in a hash table that is indexed by the connection's rxhash which is stored in the socket structure. The rxhash is passed in skb's received on the connection from netif_receive_skb. For each received packet, the associated rxhash is used to look up the CPU in the hash table, if a valid CPU is set then the packet is steered to that CPU using the RPS mechanisms. The convolution of the simple approach is that it would potentially allow OOO packets. If threads are thrashing around CPUs or multiple threads are trying to read from the same sockets, a quickly changing CPU value in the hash table could cause rampant OOO packets-- we consider this a non-starter. To avoid OOO packets, this solution implements two types of hash tables: rps_sock_flow_table and rps_dev_flow_table. rps_sock_table is a global hash table. Each entry is just a CPU number and it is populated in recvmsg and sendmsg as described above. This table contains the "desired" CPUs for flows. rps_dev_flow_table is specific to each device queue. Each entry contains a CPU and a tail queue counter. The CPU is the "current" CPU for a matching flow. The tail queue counter holds the value of a tail queue counter for the associated CPU's backlog queue at the time of last enqueue for a flow matching the entry. Each backlog queue has a queue head counter which is incremented on dequeue, and so a queue tail counter is computed as queue head count + queue length. When a packet is enqueued on a backlog queue, the current value of the queue tail counter is saved in the hash entry of the rps_dev_flow_table. And now the trick: when selecting the CPU for RPS (get_rps_cpu) the rps_sock_flow table and the rps_dev_flow table for the RX queue are consulted. When the desired CPU for the flow (found in the rps_sock_flow table) does not match the current CPU (found in the rps_dev_flow table), the current CPU is changed to the desired CPU if one of the following is true: - The current CPU is unset (equal to RPS_NO_CPU) - Current CPU is offline - The current CPU's queue head counter >= queue tail counter in the rps_dev_flow table. This checks if the queue tail has advanced beyond the last packet that was enqueued using this table entry. This guarantees that all packets queued using this entry have been dequeued, thus preserving in order delivery. Making each queue have its own rps_dev_flow table has two advantages: 1) the tail queue counters will be written on each receive, so keeping the table local to interrupting CPU s good for locality. 2) this allows lockless access to the table-- the CPU number and queue tail counter need to be accessed together under mutual exclusion from netif_receive_skb, we assume that this is only called from device napi_poll which is non-reentrant. This patch implements RFS for TCP and connected UDP sockets. It should be usable for other flow oriented protocols. There are two configuration parameters for RFS. The "rps_flow_entries" kernel init parameter sets the number of entries in the rps_sock_flow_table, the per rxqueue sysfs entry "rps_flow_cnt" contains the number of entries in the rps_dev_flow table for the rxqueue. Both are rounded to power of two. The obvious benefit of RFS (over just RPS) is that it achieves CPU locality between the receive processing for a flow and the applications processing; this can result in increased performance (higher pps, lower latency). The benefits of RFS are dependent on cache hierarchy, application load, and other factors. On simple benchmarks, we don't necessarily see improvement and sometimes see degradation. However, for more complex benchmarks and for applications where cache pressure is much higher this technique seems to perform very well. Below are some benchmark results which show the potential benfit of this patch. The netperf test has 500 instances of netperf TCP_RR test with 1 byte req. and resp. The RPC test is an request/response test similar in structure to netperf RR test ith 100 threads on each host, but does more work in userspace that netperf. e1000e on 8 core Intel No RFS or RPS 104K tps at 30% CPU No RFS (best RPS config): 290K tps at 63% CPU RFS 303K tps at 61% CPU RPC test tps CPU% 50/90/99% usec latency Latency StdDev No RFS/RPS 103K 48% 757/900/3185 4472.35 RPS only: 174K 73% 415/993/2468 491.66 RFS 223K 73% 379/651/1382 315.61 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-16 17:01:27 -06:00
}
while ((skb = skb_dequeue(&oldsd->input_pkt_queue))) {
netif_rx_ni(skb);
input_queue_head_incr(oldsd);
}
return 0;
}
/**
* netdev_increment_features - increment feature set by one
* @all: current feature set
* @one: new feature set
* @mask: mask feature set
*
* Computes a new feature set after adding a device with feature set
* @one to the master device with current feature set @all. Will not
* enable anything that is off in @mask. Returns the new feature set.
*/
netdev_features_t netdev_increment_features(netdev_features_t all,
netdev_features_t one, netdev_features_t mask)
{
if (mask & NETIF_F_HW_CSUM)
mask |= NETIF_F_CSUM_MASK;
mask |= NETIF_F_VLAN_CHALLENGED;
all |= one & (NETIF_F_ONE_FOR_ALL | NETIF_F_CSUM_MASK) & mask;
all &= one | ~NETIF_F_ALL_FOR_ALL;
net: Allow no-cache copy from user on transmit This patch uses __copy_from_user_nocache on transmit to bypass data cache for a performance improvement. skb_add_data_nocache and skb_copy_to_page_nocache can be called by sendmsg functions to use this feature, initial support is in tcp_sendmsg. This functionality is configurable per device using ethtool. Presumably, this feature would only be useful when the driver does not touch the data. The feature is turned on by default if a device indicates that it does some form of checksum offload; it is off by default for devices that do no checksum offload or indicate no checksum is necessary. For the former case copy-checksum is probably done anyway, in the latter case the device is likely loopback in which case the no cache copy is probably not beneficial. This patch was tested using 200 instances of netperf TCP_RR with 1400 byte request and one byte reply. Platform is 16 core AMD x86. No-cache copy disabled: 672703 tps, 97.13% utilization 50/90/99% latency:244.31 484.205 1028.41 No-cache copy enabled: 702113 tps, 96.16% utilization, 50/90/99% latency 238.56 467.56 956.955 Using 14000 byte request and response sizes demonstrate the effects more dramatically: No-cache copy disabled: 79571 tps, 34.34 %utlization 50/90/95% latency 1584.46 2319.59 5001.76 No-cache copy enabled: 83856 tps, 34.81% utilization 50/90/95% latency 2508.42 2622.62 2735.88 Note especially the effect on latency tail (95th percentile). This seems to provide a nice performance improvement and is consistent in the tests I ran. Presumably, this would provide the greatest benfits in the presence of an application workload stressing the cache and a lot of transmit data happening. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 23:30:30 -06:00
/* If one device supports hw checksumming, set for all. */
if (all & NETIF_F_HW_CSUM)
all &= ~(NETIF_F_CSUM_MASK & ~NETIF_F_HW_CSUM);
return all;
}
EXPORT_SYMBOL(netdev_increment_features);
static struct hlist_head * __net_init netdev_create_hash(void)
{
int i;
struct hlist_head *hash;
hash = kmalloc(sizeof(*hash) * NETDEV_HASHENTRIES, GFP_KERNEL);
if (hash != NULL)
for (i = 0; i < NETDEV_HASHENTRIES; i++)
INIT_HLIST_HEAD(&hash[i]);
return hash;
}
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
/* Initialize per network namespace state */
static int __net_init netdev_init(struct net *net)
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
{
if (net != &init_net)
INIT_LIST_HEAD(&net->dev_base_head);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
net->dev_name_head = netdev_create_hash();
if (net->dev_name_head == NULL)
goto err_name;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
net->dev_index_head = netdev_create_hash();
if (net->dev_index_head == NULL)
goto err_idx;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
return 0;
err_idx:
kfree(net->dev_name_head);
err_name:
return -ENOMEM;
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
}
/**
* netdev_drivername - network driver for the device
* @dev: network device
*
* Determine network driver for device.
*/
const char *netdev_drivername(const struct net_device *dev)
{
const struct device_driver *driver;
const struct device *parent;
const char *empty = "";
parent = dev->dev.parent;
if (!parent)
return empty;
driver = parent->driver;
if (driver && driver->name)
return driver->name;
return empty;
}
static void __netdev_printk(const char *level, const struct net_device *dev,
struct va_format *vaf)
{
if (dev && dev->dev.parent) {
dev_printk_emit(level[1] - '0',
dev->dev.parent,
"%s %s %s%s: %pV",
dev_driver_string(dev->dev.parent),
dev_name(dev->dev.parent),
netdev_name(dev), netdev_reg_state(dev),
vaf);
} else if (dev) {
printk("%s%s%s: %pV",
level, netdev_name(dev), netdev_reg_state(dev), vaf);
} else {
printk("%s(NULL net_device): %pV", level, vaf);
}
}
void netdev_printk(const char *level, const struct net_device *dev,
const char *format, ...)
{
struct va_format vaf;
va_list args;
va_start(args, format);
vaf.fmt = format;
vaf.va = &args;
__netdev_printk(level, dev, &vaf);
va_end(args);
}
EXPORT_SYMBOL(netdev_printk);
#define define_netdev_printk_level(func, level) \
void func(const struct net_device *dev, const char *fmt, ...) \
{ \
struct va_format vaf; \
va_list args; \
\
va_start(args, fmt); \
\
vaf.fmt = fmt; \
vaf.va = &args; \
\
__netdev_printk(level, dev, &vaf); \
\
va_end(args); \
} \
EXPORT_SYMBOL(func);
define_netdev_printk_level(netdev_emerg, KERN_EMERG);
define_netdev_printk_level(netdev_alert, KERN_ALERT);
define_netdev_printk_level(netdev_crit, KERN_CRIT);
define_netdev_printk_level(netdev_err, KERN_ERR);
define_netdev_printk_level(netdev_warn, KERN_WARNING);
define_netdev_printk_level(netdev_notice, KERN_NOTICE);
define_netdev_printk_level(netdev_info, KERN_INFO);
static void __net_exit netdev_exit(struct net *net)
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
{
kfree(net->dev_name_head);
kfree(net->dev_index_head);
}
static struct pernet_operations __net_initdata netdev_net_ops = {
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
.init = netdev_init,
.exit = netdev_exit,
};
static void __net_exit default_device_exit(struct net *net)
{
struct net_device *dev, *aux;
/*
* Push all migratable network devices back to the
* initial network namespace
*/
rtnl_lock();
for_each_netdev_safe(net, dev, aux) {
int err;
char fb_name[IFNAMSIZ];
/* Ignore unmoveable devices (i.e. loopback) */
if (dev->features & NETIF_F_NETNS_LOCAL)
continue;
/* Leave virtual devices for the generic cleanup */
if (dev->rtnl_link_ops)
continue;
/* Push remaining network devices to init_net */
snprintf(fb_name, IFNAMSIZ, "dev%d", dev->ifindex);
err = dev_change_net_namespace(dev, &init_net, fb_name);
if (err) {
pr_emerg("%s: failed to move %s to init_net: %d\n",
__func__, dev->name, err);
BUG();
}
}
rtnl_unlock();
}
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
static void __net_exit rtnl_lock_unregistering(struct list_head *net_list)
{
/* Return with the rtnl_lock held when there are no network
* devices unregistering in any network namespace in net_list.
*/
struct net *net;
bool unregistering;
DEFINE_WAIT_FUNC(wait, woken_wake_function);
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
add_wait_queue(&netdev_unregistering_wq, &wait);
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
for (;;) {
unregistering = false;
rtnl_lock();
list_for_each_entry(net, net_list, exit_list) {
if (net->dev_unreg_count > 0) {
unregistering = true;
break;
}
}
if (!unregistering)
break;
__rtnl_unlock();
wait_woken(&wait, TASK_UNINTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
}
remove_wait_queue(&netdev_unregistering_wq, &wait);
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
}
static void __net_exit default_device_exit_batch(struct list_head *net_list)
{
/* At exit all network devices most be removed from a network
* namespace. Do this in the reverse order of registration.
* Do this across as many network namespaces as possible to
* improve batching efficiency.
*/
struct net_device *dev;
struct net *net;
LIST_HEAD(dev_kill_list);
net: Delay default_device_exit_batch until no devices are unregistering v2 There is currently serialization network namespaces exiting and network devices exiting as the final part of netdev_run_todo does not happen under the rtnl_lock. This is compounded by the fact that the only list of devices unregistering in netdev_run_todo is local to the netdev_run_todo. This lack of serialization in extreme cases results in network devices unregistering in netdev_run_todo after the loopback device of their network namespace has been freed (making dst_ifdown unsafe), and after the their network namespace has exited (making the NETDEV_UNREGISTER, and NETDEV_UNREGISTER_FINAL callbacks unsafe). Add the missing serialization by a per network namespace count of how many network devices are unregistering and having a wait queue that is woken up whenever the count is decreased. The count and wait queue allow default_device_exit_batch to wait until all of the unregistration activity for a network namespace has finished before proceeding to unregister the loopback device and then allowing the network namespace to exit. Only a single global wait queue is used because there is a single global lock, and there is a single waiter, per network namespace wait queues would be a waste of resources. The per network namespace count of unregistering devices gives a progress guarantee because the number of network devices unregistering in an exiting network namespace must ultimately drop to zero (assuming network device unregistration completes). The basic logic remains the same as in v1. This patch is now half comment and half rtnl_lock_unregistering an expanded version of wait_event performs no extra work in the common case where no network devices are unregistering when we get to default_device_exit_batch. Reported-by: Francesco Ruggeri <fruggeri@aristanetworks.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23 22:19:49 -06:00
/* To prevent network device cleanup code from dereferencing
* loopback devices or network devices that have been freed
* wait here for all pending unregistrations to complete,
* before unregistring the loopback device and allowing the
* network namespace be freed.
*
* The netdev todo list containing all network devices
* unregistrations that happen in default_device_exit_batch
* will run in the rtnl_unlock() at the end of
* default_device_exit_batch.
*/
rtnl_lock_unregistering(net_list);
list_for_each_entry(net, net_list, exit_list) {
for_each_netdev_reverse(net, dev) {
if (dev->rtnl_link_ops && dev->rtnl_link_ops->dellink)
dev->rtnl_link_ops->dellink(dev, &dev_kill_list);
else
unregister_netdevice_queue(dev, &dev_kill_list);
}
}
unregister_netdevice_many(&dev_kill_list);
rtnl_unlock();
}
static struct pernet_operations __net_initdata default_device_ops = {
.exit = default_device_exit,
.exit_batch = default_device_exit_batch,
};
/*
* Initialize the DEV module. At boot time this walks the device list and
* unhooks any devices that fail to initialise (normally hardware not
* present) and leaves us with a valid list of present and active devices.
*
*/
/*
* This is called single threaded during boot, so no need
* to take the rtnl semaphore.
*/
static int __init net_dev_init(void)
{
int i, rc = -ENOMEM;
BUG_ON(!dev_boot_phase);
if (dev_proc_init())
goto out;
if (netdev_kobject_init())
goto out;
INIT_LIST_HEAD(&ptype_all);
for (i = 0; i < PTYPE_HASH_SIZE; i++)
INIT_LIST_HEAD(&ptype_base[i]);
INIT_LIST_HEAD(&offload_base);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 12:56:21 -06:00
if (register_pernet_subsys(&netdev_net_ops))
goto out;
/*
* Initialise the packet receive queues.
*/
for_each_possible_cpu(i) {
struct work_struct *flush = per_cpu_ptr(&flush_works, i);
struct softnet_data *sd = &per_cpu(softnet_data, i);
INIT_WORK(flush, flush_backlog);
skb_queue_head_init(&sd->input_pkt_queue);
skb_queue_head_init(&sd->process_queue);
INIT_LIST_HEAD(&sd->poll_list);
sd->output_queue_tailp = &sd->output_queue;
#ifdef CONFIG_RPS
sd->csd.func = rps_trigger_softirq;
sd->csd.info = sd;
sd->cpu = i;
#endif
rps: Receive Packet Steering This patch implements software receive side packet steering (RPS). RPS distributes the load of received packet processing across multiple CPUs. Problem statement: Protocol processing done in the NAPI context for received packets is serialized per device queue and becomes a bottleneck under high packet load. This substantially limits pps that can be achieved on a single queue NIC and provides no scaling with multiple cores. This solution queues packets early on in the receive path on the backlog queues of other CPUs. This allows protocol processing (e.g. IP and TCP) to be performed on packets in parallel. For each device (or each receive queue in a multi-queue device) a mask of CPUs is set to indicate the CPUs that can process packets. A CPU is selected on a per packet basis by hashing contents of the packet header (e.g. the TCP or UDP 4-tuple) and using the result to index into the CPU mask. The IPI mechanism is used to raise networking receive softirqs between CPUs. This effectively emulates in software what a multi-queue NIC can provide, but is generic requiring no device support. Many devices now provide a hash over the 4-tuple on a per packet basis (e.g. the Toeplitz hash). This patch allow drivers to set the HW reported hash in an skb field, and that value in turn is used to index into the RPS maps. Using the HW generated hash can avoid cache misses on the packet when steering it to a remote CPU. The CPU mask is set on a per device and per queue basis in the sysfs variable /sys/class/net/<device>/queues/rx-<n>/rps_cpus. This is a set of canonical bit maps for receive queues in the device (numbered by <n>). If a device does not support multi-queue, a single variable is used for the device (rx-0). Generally, we have found this technique increases pps capabilities of a single queue device with good CPU utilization. Optimal settings for the CPU mask seem to depend on architectures and cache hierarcy. Below are some results running 500 instances of netperf TCP_RR test with 1 byte req. and resp. Results show cumulative transaction rate and system CPU utilization. e1000e on 8 core Intel Without RPS: 108K tps at 33% CPU With RPS: 311K tps at 64% CPU forcedeth on 16 core AMD Without RPS: 156K tps at 15% CPU With RPS: 404K tps at 49% CPU bnx2x on 16 core AMD Without RPS 567K tps at 61% CPU (4 HW RX queues) Without RPS 738K tps at 96% CPU (8 HW RX queues) With RPS: 854K tps at 76% CPU (4 HW RX queues) Caveats: - The benefits of this patch are dependent on architecture and cache hierarchy. Tuning the masks to get best performance is probably necessary. - This patch adds overhead in the path for processing a single packet. In a lightly loaded server this overhead may eliminate the advantages of increased parallelism, and possibly cause some relative performance degradation. We have found that masks that are cache aware (share same caches with the interrupting CPU) mitigate much of this. - The RPS masks can be changed dynamically, however whenever the mask is changed this introduces the possibility of generating out of order packets. It's probably best not change the masks too frequently. Signed-off-by: Tom Herbert <therbert@google.com> include/linux/netdevice.h | 32 ++++- include/linux/skbuff.h | 3 + net/core/dev.c | 335 +++++++++++++++++++++++++++++++++++++-------- net/core/net-sysfs.c | 225 ++++++++++++++++++++++++++++++- net/core/skbuff.c | 2 + 5 files changed, 538 insertions(+), 59 deletions(-) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 02:03:29 -06:00
sd->backlog.poll = process_backlog;
sd->backlog.weight = weight_p;
}
dev_boot_phase = 0;
/* The loopback device is special if any other network devices
* is present in a network namespace the loopback device must
* be present. Since we now dynamically allocate and free the
* loopback device ensure this invariant is maintained by
* keeping the loopback device as the first device on the
* list of network devices. Ensuring the loopback devices
* is the first device that appears and the last network device
* that disappears.
*/
if (register_pernet_device(&loopback_net_ops))
goto out;
if (register_pernet_device(&default_device_ops))
goto out;
open_softirq(NET_TX_SOFTIRQ, net_tx_action);
open_softirq(NET_RX_SOFTIRQ, net_rx_action);
rc = cpuhp_setup_state_nocalls(CPUHP_NET_DEV_DEAD, "net/dev:dead",
NULL, dev_cpu_dead);
WARN_ON(rc < 0);
dst_subsys_init();
rc = 0;
out:
return rc;
}
subsys_initcall(net_dev_init);