1
0
Fork 0
alistair23-linux/drivers/media/firewire/firedtv-avc.c

1468 lines
40 KiB
C
Raw Normal View History

firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/*
* FireDTV driver (formerly known as FireSAT)
*
* Copyright (C) 2004 Andreas Monitzer <andy@monitzer.com>
* Copyright (C) 2008 Ben Backx <ben@bbackx.com>
* Copyright (C) 2008 Henrik Kurelid <henrik@kurelid.se>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
#include <linux/bug.h>
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/mutex.h>
#include <linux/string.h>
#include <linux/stringify.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <dvb_frontend.h>
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
#include "firedtv.h"
#define FCP_COMMAND_REGISTER 0xfffff0000b00ULL
#define AVC_CTYPE_CONTROL 0x0
#define AVC_CTYPE_STATUS 0x1
#define AVC_CTYPE_NOTIFY 0x3
#define AVC_RESPONSE_ACCEPTED 0x9
#define AVC_RESPONSE_STABLE 0xc
#define AVC_RESPONSE_CHANGED 0xd
#define AVC_RESPONSE_INTERIM 0xf
#define AVC_SUBUNIT_TYPE_TUNER (0x05 << 3)
#define AVC_SUBUNIT_TYPE_UNIT (0x1f << 3)
#define AVC_OPCODE_VENDOR 0x00
#define AVC_OPCODE_READ_DESCRIPTOR 0x09
#define AVC_OPCODE_DSIT 0xc8
#define AVC_OPCODE_DSD 0xcb
#define DESCRIPTOR_TUNER_STATUS 0x80
#define DESCRIPTOR_SUBUNIT_IDENTIFIER 0x00
#define SFE_VENDOR_DE_COMPANYID_0 0x00 /* OUI of Digital Everywhere */
#define SFE_VENDOR_DE_COMPANYID_1 0x12
#define SFE_VENDOR_DE_COMPANYID_2 0x87
#define SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL 0x0a
#define SFE_VENDOR_OPCODE_LNB_CONTROL 0x52
#define SFE_VENDOR_OPCODE_TUNE_QPSK 0x58 /* for DVB-S */
#define SFE_VENDOR_OPCODE_GET_FIRMWARE_VERSION 0x00
#define SFE_VENDOR_OPCODE_HOST2CA 0x56
#define SFE_VENDOR_OPCODE_CA2HOST 0x57
#define SFE_VENDOR_OPCODE_CISTATUS 0x59
#define SFE_VENDOR_OPCODE_TUNE_QPSK2 0x60 /* for DVB-S2 */
#define SFE_VENDOR_TAG_CA_RESET 0x00
#define SFE_VENDOR_TAG_CA_APPLICATION_INFO 0x01
#define SFE_VENDOR_TAG_CA_PMT 0x02
#define SFE_VENDOR_TAG_CA_DATE_TIME 0x04
#define SFE_VENDOR_TAG_CA_MMI 0x05
#define SFE_VENDOR_TAG_CA_ENTER_MENU 0x07
#define EN50221_LIST_MANAGEMENT_ONLY 0x03
#define EN50221_TAG_APP_INFO 0x9f8021
#define EN50221_TAG_CA_INFO 0x9f8031
struct avc_command_frame {
u8 ctype;
u8 subunit;
u8 opcode;
u8 operand[509];
};
struct avc_response_frame {
u8 response;
u8 subunit;
u8 opcode;
u8 operand[509];
};
#define LAST_OPERAND (509 - 1)
static inline void clear_operands(struct avc_command_frame *c, int from, int to)
{
memset(&c->operand[from], 0, to - from + 1);
}
static void pad_operands(struct avc_command_frame *c, int from)
{
int to = ALIGN(from, 4);
if (from <= to && to <= LAST_OPERAND)
clear_operands(c, from, to);
}
#define AVC_DEBUG_READ_DESCRIPTOR 0x0001
#define AVC_DEBUG_DSIT 0x0002
#define AVC_DEBUG_DSD 0x0004
#define AVC_DEBUG_REGISTER_REMOTE_CONTROL 0x0008
#define AVC_DEBUG_LNB_CONTROL 0x0010
#define AVC_DEBUG_TUNE_QPSK 0x0020
#define AVC_DEBUG_TUNE_QPSK2 0x0040
#define AVC_DEBUG_HOST2CA 0x0080
#define AVC_DEBUG_CA2HOST 0x0100
#define AVC_DEBUG_APPLICATION_PMT 0x4000
#define AVC_DEBUG_FCP_PAYLOADS 0x8000
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
static int avc_debug;
module_param_named(debug, avc_debug, int, 0644);
MODULE_PARM_DESC(debug, "Verbose logging (none = 0"
", FCP subactions"
": READ DESCRIPTOR = " __stringify(AVC_DEBUG_READ_DESCRIPTOR)
", DSIT = " __stringify(AVC_DEBUG_DSIT)
", REGISTER_REMOTE_CONTROL = " __stringify(AVC_DEBUG_REGISTER_REMOTE_CONTROL)
", LNB CONTROL = " __stringify(AVC_DEBUG_LNB_CONTROL)
", TUNE QPSK = " __stringify(AVC_DEBUG_TUNE_QPSK)
", TUNE QPSK2 = " __stringify(AVC_DEBUG_TUNE_QPSK2)
", HOST2CA = " __stringify(AVC_DEBUG_HOST2CA)
", CA2HOST = " __stringify(AVC_DEBUG_CA2HOST)
"; Application sent PMT = " __stringify(AVC_DEBUG_APPLICATION_PMT)
", FCP payloads = " __stringify(AVC_DEBUG_FCP_PAYLOADS)
", or a combination, or all = -1)");
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/*
* This is a workaround since there is no vendor specific command to retrieve
* ca_info using AVC. If this parameter is not used, ca_system_id will be
* filled with application_manufacturer from ca_app_info.
* Digital Everywhere have said that adding ca_info is on their TODO list.
*/
static unsigned int num_fake_ca_system_ids;
static int fake_ca_system_ids[4] = { -1, -1, -1, -1 };
module_param_array(fake_ca_system_ids, int, &num_fake_ca_system_ids, 0644);
MODULE_PARM_DESC(fake_ca_system_ids, "If your CAM application manufacturer "
"does not have the same ca_system_id as your CAS, you can "
"override what ca_system_ids are presented to the "
"application by setting this field to an array of ids.");
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
static const char *debug_fcp_ctype(unsigned int ctype)
{
static const char *ctypes[] = {
[0x0] = "CONTROL", [0x1] = "STATUS",
[0x2] = "SPECIFIC INQUIRY", [0x3] = "NOTIFY",
[0x4] = "GENERAL INQUIRY", [0x8] = "NOT IMPLEMENTED",
[0x9] = "ACCEPTED", [0xa] = "REJECTED",
[0xb] = "IN TRANSITION", [0xc] = "IMPLEMENTED/STABLE",
[0xd] = "CHANGED", [0xf] = "INTERIM",
};
const char *ret = ctype < ARRAY_SIZE(ctypes) ? ctypes[ctype] : NULL;
return ret ? ret : "?";
}
static const char *debug_fcp_opcode(unsigned int opcode,
const u8 *data, int length)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
switch (opcode) {
case AVC_OPCODE_VENDOR:
break;
case AVC_OPCODE_READ_DESCRIPTOR:
return avc_debug & AVC_DEBUG_READ_DESCRIPTOR ?
"ReadDescriptor" : NULL;
case AVC_OPCODE_DSIT:
return avc_debug & AVC_DEBUG_DSIT ?
"DirectSelectInfo.Type" : NULL;
case AVC_OPCODE_DSD:
return avc_debug & AVC_DEBUG_DSD ? "DirectSelectData" : NULL;
default:
return "Unknown";
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
if (length < 7 ||
data[3] != SFE_VENDOR_DE_COMPANYID_0 ||
data[4] != SFE_VENDOR_DE_COMPANYID_1 ||
data[5] != SFE_VENDOR_DE_COMPANYID_2)
return "Vendor/Unknown";
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
switch (data[6]) {
case SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL:
return avc_debug & AVC_DEBUG_REGISTER_REMOTE_CONTROL ?
"RegisterRC" : NULL;
case SFE_VENDOR_OPCODE_LNB_CONTROL:
return avc_debug & AVC_DEBUG_LNB_CONTROL ? "LNBControl" : NULL;
case SFE_VENDOR_OPCODE_TUNE_QPSK:
return avc_debug & AVC_DEBUG_TUNE_QPSK ? "TuneQPSK" : NULL;
case SFE_VENDOR_OPCODE_TUNE_QPSK2:
return avc_debug & AVC_DEBUG_TUNE_QPSK2 ? "TuneQPSK2" : NULL;
case SFE_VENDOR_OPCODE_HOST2CA:
return avc_debug & AVC_DEBUG_HOST2CA ? "Host2CA" : NULL;
case SFE_VENDOR_OPCODE_CA2HOST:
return avc_debug & AVC_DEBUG_CA2HOST ? "CA2Host" : NULL;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
return "Vendor/Unknown";
}
static void debug_fcp(const u8 *data, int length)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
unsigned int subunit_type, subunit_id, opcode;
const char *op, *prefix;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
prefix = data[0] > 7 ? "FCP <- " : "FCP -> ";
subunit_type = data[1] >> 3;
subunit_id = data[1] & 7;
opcode = subunit_type == 0x1e || subunit_id == 5 ? ~0 : data[2];
op = debug_fcp_opcode(opcode, data, length);
if (op) {
printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n",
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
prefix, subunit_type, subunit_id, length,
debug_fcp_ctype(data[0]), op);
if (avc_debug & AVC_DEBUG_FCP_PAYLOADS)
print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_NONE,
16, 1, data, length, false);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
}
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
static void debug_pmt(char *msg, int length)
{
printk(KERN_INFO "APP PMT -> l=%d\n", length);
print_hex_dump(KERN_INFO, "APP PMT -> ", DUMP_PREFIX_NONE,
16, 1, msg, length, false);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
static int avc_write(struct firedtv *fdtv)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
int err, retry;
fdtv->avc_reply_received = false;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
for (retry = 0; retry < 6; retry++) {
if (unlikely(avc_debug))
debug_fcp(fdtv->avc_data, fdtv->avc_data_length);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
err = fdtv_write(fdtv, FCP_COMMAND_REGISTER,
fdtv->avc_data, fdtv->avc_data_length);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (err) {
dev_err(fdtv->device, "FCP command write failed\n");
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return err;
}
/*
* AV/C specs say that answers should be sent within 150 ms.
* Time out after 200 ms.
*/
if (wait_event_timeout(fdtv->avc_wait,
fdtv->avc_reply_received,
msecs_to_jiffies(200)) != 0)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return 0;
}
dev_err(fdtv->device, "FCP response timed out\n");
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return -ETIMEDOUT;
}
static bool is_register_rc(struct avc_response_frame *r)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
return r->opcode == AVC_OPCODE_VENDOR &&
r->operand[0] == SFE_VENDOR_DE_COMPANYID_0 &&
r->operand[1] == SFE_VENDOR_DE_COMPANYID_1 &&
r->operand[2] == SFE_VENDOR_DE_COMPANYID_2 &&
r->operand[3] == SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_recv(struct firedtv *fdtv, void *data, size_t length)
{
struct avc_response_frame *r = data;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (unlikely(avc_debug))
debug_fcp(data, length);
if (length >= 8 && is_register_rc(r)) {
switch (r->response) {
case AVC_RESPONSE_CHANGED:
fdtv_handle_rc(fdtv, r->operand[4] << 8 | r->operand[5]);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
schedule_work(&fdtv->remote_ctrl_work);
break;
case AVC_RESPONSE_INTERIM:
if (is_register_rc((void *)fdtv->avc_data))
goto wake;
break;
default:
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
dev_info(fdtv->device,
"remote control result = %d\n", r->response);
}
return 0;
}
if (fdtv->avc_reply_received) {
dev_err(fdtv->device, "out-of-order AVC response, ignored\n");
return -EIO;
}
memcpy(fdtv->avc_data, data, length);
fdtv->avc_data_length = length;
wake:
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_reply_received = true;
wake_up(&fdtv->avc_wait);
return 0;
}
V4L/DVB (12482): firedtv: add PID filtering for SW zigzag retune The AVC protocol uses the same command for tuning and PID filtering and since dvb-core uses a software zigzagging to do automatic retuning this could cause all PID filters to be cleared. PID filter information is now included in all DSD commands to the card. Background: There is a problem in the firedtv driver that causes recordings to stop if the SW zigzag algorithm in dvb-core kicks in with a retune after the application has set up the PID filters. Since tuning and setting PID filters uses the same AVC command (DSD) and only the replace subfunction is supported by the card, it is not possible to do a retune without setting the PID filters. This means that the PID filtering has to be sent in each tune. This problem applies to C and T cards since S and S2 cards tune using a vendor specific command. The patch corrects the problem by sending the PID list in each tune. I have tested it on my T card with a good result. How to trigger problem: Zap to a channel and output AV to a file, e.g. "tzap -c channels.conf SVT1 -r -o SVT1.ts". After a short while, pull the antenna cable from the card. The lock on the channel will disappear and the TS file will stop increasing in size. Wait a couple of seconds. Replug the cable again. You will get a lock on the channel again, but the TS file will never increase in size agains sinze no PIDS are filtered. Tested with kaffeine with DVB-T and DVB-C: Fixes retuning after antenna was plugged out and back in with DVB-T. Does not fix this with DVB-C, but also doesn't regress on DVB-C. Signed-off-by: Henrik Kurelid <henrik@kurelid.se> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-01 05:02:38 -06:00
static int add_pid_filter(struct firedtv *fdtv, u8 *operand)
{
int i, n, pos = 1;
for (i = 0, n = 0; i < 16; i++) {
if (test_bit(i, &fdtv->channel_active)) {
operand[pos++] = 0x13; /* flowfunction relay */
operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */
operand[pos++] = (fdtv->channel_pid[i] >> 8) & 0x1f;
operand[pos++] = fdtv->channel_pid[i] & 0xff;
operand[pos++] = 0x00; /* tableID */
operand[pos++] = 0x00; /* filter_length */
n++;
}
}
operand[0] = n;
return pos;
}
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/*
* tuning command for setting the relative LNB frequency
* (not supported by the AVC standard)
*/
static int avc_tuner_tuneqpsk(struct firedtv *fdtv,
struct dtv_frontend_properties *p)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
if (fdtv->type == FIREDTV_DVB_S2)
c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK2;
else
c->operand[3] = SFE_VENDOR_OPCODE_TUNE_QPSK;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->operand[4] = (p->frequency >> 24) & 0xff;
c->operand[5] = (p->frequency >> 16) & 0xff;
c->operand[6] = (p->frequency >> 8) & 0xff;
c->operand[7] = p->frequency & 0xff;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->operand[8] = ((p->symbol_rate / 1000) >> 8) & 0xff;
c->operand[9] = (p->symbol_rate / 1000) & 0xff;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
switch (p->fec_inner) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case FEC_1_2: c->operand[10] = 0x1; break;
case FEC_2_3: c->operand[10] = 0x2; break;
case FEC_3_4: c->operand[10] = 0x3; break;
case FEC_5_6: c->operand[10] = 0x4; break;
case FEC_7_8: c->operand[10] = 0x5; break;
case FEC_4_5:
case FEC_8_9:
case FEC_AUTO:
default: c->operand[10] = 0x0;
}
if (fdtv->voltage == 0xff)
c->operand[11] = 0xff;
else if (fdtv->voltage == SEC_VOLTAGE_18) /* polarisation */
c->operand[11] = 0;
else
c->operand[11] = 1;
if (fdtv->tone == 0xff)
c->operand[12] = 0xff;
else if (fdtv->tone == SEC_TONE_ON) /* band */
c->operand[12] = 1;
else
c->operand[12] = 0;
if (fdtv->type == FIREDTV_DVB_S2) {
if (fdtv->fe.dtv_property_cache.delivery_system == SYS_DVBS2) {
switch (fdtv->fe.dtv_property_cache.modulation) {
case QAM_16: c->operand[13] = 0x1; break;
case QPSK: c->operand[13] = 0x2; break;
case PSK_8: c->operand[13] = 0x3; break;
default: c->operand[13] = 0x2; break;
}
switch (fdtv->fe.dtv_property_cache.rolloff) {
case ROLLOFF_35: c->operand[14] = 0x2; break;
case ROLLOFF_20: c->operand[14] = 0x0; break;
case ROLLOFF_25: c->operand[14] = 0x1; break;
case ROLLOFF_AUTO:
default: c->operand[14] = 0x2; break;
/* case ROLLOFF_NONE: c->operand[14] = 0xff; break; */
}
switch (fdtv->fe.dtv_property_cache.pilot) {
case PILOT_AUTO: c->operand[15] = 0x0; break;
case PILOT_OFF: c->operand[15] = 0x0; break;
case PILOT_ON: c->operand[15] = 0x1; break;
}
} else {
c->operand[13] = 0x1; /* auto modulation */
c->operand[14] = 0xff; /* disable rolloff */
c->operand[15] = 0xff; /* disable pilot */
}
return 16;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
} else {
return 13;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
}
static int avc_tuner_dsd_dvb_c(struct firedtv *fdtv,
struct dtv_frontend_properties *p)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->opcode = AVC_OPCODE_DSD;
c->operand[0] = 0; /* source plug */
c->operand[1] = 0xd2; /* subfunction replace */
c->operand[2] = 0x20; /* system id = DVB */
c->operand[3] = 0x00; /* antenna number */
c->operand[4] = 0x11; /* system_specific_multiplex selection_length */
/* multiplex_valid_flags, high byte */
c->operand[5] = 0 << 7 /* reserved */
| 0 << 6 /* Polarisation */
| 0 << 5 /* Orbital_Pos */
| 1 << 4 /* Frequency */
| 1 << 3 /* Symbol_Rate */
| 0 << 2 /* FEC_outer */
| (p->fec_inner != FEC_AUTO ? 1 << 1 : 0)
| (p->modulation != QAM_AUTO ? 1 << 0 : 0);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* multiplex_valid_flags, low byte */
c->operand[6] = 0 << 7 /* NetworkID */
| 0 << 0 /* reserved */ ;
c->operand[7] = 0x00;
c->operand[8] = 0x00;
c->operand[9] = 0x00;
c->operand[10] = 0x00;
c->operand[11] = (((p->frequency / 4000) >> 16) & 0xff) | (2 << 6);
c->operand[12] = ((p->frequency / 4000) >> 8) & 0xff;
c->operand[13] = (p->frequency / 4000) & 0xff;
c->operand[14] = ((p->symbol_rate / 1000) >> 12) & 0xff;
c->operand[15] = ((p->symbol_rate / 1000) >> 4) & 0xff;
c->operand[16] = ((p->symbol_rate / 1000) << 4) & 0xf0;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->operand[17] = 0x00;
switch (p->fec_inner) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case FEC_1_2: c->operand[18] = 0x1; break;
case FEC_2_3: c->operand[18] = 0x2; break;
case FEC_3_4: c->operand[18] = 0x3; break;
case FEC_5_6: c->operand[18] = 0x4; break;
case FEC_7_8: c->operand[18] = 0x5; break;
case FEC_8_9: c->operand[18] = 0x6; break;
case FEC_4_5: c->operand[18] = 0x8; break;
case FEC_AUTO:
default: c->operand[18] = 0x0;
}
switch (p->modulation) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case QAM_16: c->operand[19] = 0x08; break;
case QAM_32: c->operand[19] = 0x10; break;
case QAM_64: c->operand[19] = 0x18; break;
case QAM_128: c->operand[19] = 0x20; break;
case QAM_256: c->operand[19] = 0x28; break;
case QAM_AUTO:
default: c->operand[19] = 0x00;
}
c->operand[20] = 0x00;
c->operand[21] = 0x00;
return 22 + add_pid_filter(fdtv, &c->operand[22]);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
static int avc_tuner_dsd_dvb_t(struct firedtv *fdtv,
struct dtv_frontend_properties *p)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->opcode = AVC_OPCODE_DSD;
c->operand[0] = 0; /* source plug */
c->operand[1] = 0xd2; /* subfunction replace */
c->operand[2] = 0x20; /* system id = DVB */
c->operand[3] = 0x00; /* antenna number */
c->operand[4] = 0x0c; /* system_specific_multiplex selection_length */
/* multiplex_valid_flags, high byte */
c->operand[5] =
0 << 7 /* reserved */
| 1 << 6 /* CenterFrequency */
| (p->bandwidth_hz != 0 ? 1 << 5 : 0)
| (p->modulation != QAM_AUTO ? 1 << 4 : 0)
| (p->hierarchy != HIERARCHY_AUTO ? 1 << 3 : 0)
| (p->code_rate_HP != FEC_AUTO ? 1 << 2 : 0)
| (p->code_rate_LP != FEC_AUTO ? 1 << 1 : 0)
| (p->guard_interval != GUARD_INTERVAL_AUTO ? 1 << 0 : 0);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* multiplex_valid_flags, low byte */
c->operand[6] =
0 << 7 /* NetworkID */
| (p->transmission_mode != TRANSMISSION_MODE_AUTO ? 1 << 6 : 0)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
| 0 << 5 /* OtherFrequencyFlag */
| 0 << 0 /* reserved */ ;
c->operand[7] = 0x0;
c->operand[8] = (p->frequency / 10) >> 24;
c->operand[9] = ((p->frequency / 10) >> 16) & 0xff;
c->operand[10] = ((p->frequency / 10) >> 8) & 0xff;
c->operand[11] = (p->frequency / 10) & 0xff;
switch (p->bandwidth_hz) {
case 7000000: c->operand[12] = 0x20; break;
case 8000000:
case 6000000: /* not defined by AVC spec */
case 0:
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
default: c->operand[12] = 0x00;
}
switch (p->modulation) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case QAM_16: c->operand[13] = 1 << 6; break;
case QAM_64: c->operand[13] = 2 << 6; break;
case QPSK:
default: c->operand[13] = 0x00;
}
switch (p->hierarchy) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case HIERARCHY_1: c->operand[13] |= 1 << 3; break;
case HIERARCHY_2: c->operand[13] |= 2 << 3; break;
case HIERARCHY_4: c->operand[13] |= 3 << 3; break;
case HIERARCHY_AUTO:
case HIERARCHY_NONE:
default: break;
}
switch (p->code_rate_HP) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case FEC_2_3: c->operand[13] |= 1; break;
case FEC_3_4: c->operand[13] |= 2; break;
case FEC_5_6: c->operand[13] |= 3; break;
case FEC_7_8: c->operand[13] |= 4; break;
case FEC_1_2:
default: break;
}
switch (p->code_rate_LP) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case FEC_2_3: c->operand[14] = 1 << 5; break;
case FEC_3_4: c->operand[14] = 2 << 5; break;
case FEC_5_6: c->operand[14] = 3 << 5; break;
case FEC_7_8: c->operand[14] = 4 << 5; break;
case FEC_1_2:
default: c->operand[14] = 0x00; break;
}
switch (p->guard_interval) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case GUARD_INTERVAL_1_16: c->operand[14] |= 1 << 3; break;
case GUARD_INTERVAL_1_8: c->operand[14] |= 2 << 3; break;
case GUARD_INTERVAL_1_4: c->operand[14] |= 3 << 3; break;
case GUARD_INTERVAL_1_32:
case GUARD_INTERVAL_AUTO:
default: break;
}
switch (p->transmission_mode) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
case TRANSMISSION_MODE_8K: c->operand[14] |= 1 << 1; break;
case TRANSMISSION_MODE_2K:
case TRANSMISSION_MODE_AUTO:
default: break;
}
c->operand[15] = 0x00; /* network_ID[0] */
c->operand[16] = 0x00; /* network_ID[1] */
return 17 + add_pid_filter(fdtv, &c->operand[17]);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_tuner_dsd(struct firedtv *fdtv,
struct dtv_frontend_properties *p)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
int pos, ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
switch (fdtv->type) {
case FIREDTV_DVB_S:
case FIREDTV_DVB_S2: pos = avc_tuner_tuneqpsk(fdtv, p); break;
case FIREDTV_DVB_C: pos = avc_tuner_dsd_dvb_c(fdtv, p); break;
case FIREDTV_DVB_T: pos = avc_tuner_dsd_dvb_t(fdtv, p); break;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
default:
BUG();
}
pad_operands(c, pos);
fdtv->avc_data_length = ALIGN(3 + pos, 4);
ret = avc_write(fdtv);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
#if 0
/*
* FIXME:
* u8 *status was an out-parameter of avc_tuner_dsd, unused by caller.
* Check for AVC_RESPONSE_ACCEPTED here instead?
*/
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (status)
*status = r->operand[2];
#endif
mutex_unlock(&fdtv->avc_mutex);
if (ret == 0)
msleep(500);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_tuner_set_pids(struct firedtv *fdtv, unsigned char pidc, u16 pid[])
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
int ret, pos, k;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (pidc > 16 && pidc != 0xff)
return -EINVAL;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_DSD;
c->operand[0] = 0; /* source plug */
c->operand[1] = 0xd2; /* subfunction replace */
c->operand[2] = 0x20; /* system id = DVB */
c->operand[3] = 0x00; /* antenna number */
c->operand[4] = 0x00; /* system_specific_multiplex selection_length */
c->operand[5] = pidc; /* Nr_of_dsd_sel_specs */
pos = 6;
if (pidc != 0xff)
for (k = 0; k < pidc; k++) {
c->operand[pos++] = 0x13; /* flowfunction relay */
c->operand[pos++] = 0x80; /* dsd_sel_spec_valid_flags -> PID */
c->operand[pos++] = (pid[k] >> 8) & 0x1f;
c->operand[pos++] = pid[k] & 0xff;
c->operand[pos++] = 0x00; /* tableID */
c->operand[pos++] = 0x00; /* filter_length */
}
pad_operands(c, pos);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = ALIGN(3 + pos, 4);
ret = avc_write(fdtv);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code? */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
mutex_unlock(&fdtv->avc_mutex);
if (ret == 0)
msleep(50);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_tuner_get_ts(struct firedtv *fdtv)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
int ret, sl;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_DSIT;
sl = fdtv->type == FIREDTV_DVB_T ? 0x0c : 0x11;
c->operand[0] = 0; /* source plug */
c->operand[1] = 0xd2; /* subfunction replace */
c->operand[2] = 0xff; /* status */
c->operand[3] = 0x20; /* system id = DVB */
c->operand[4] = 0x00; /* antenna number */
c->operand[5] = 0x0; /* system_specific_search_flags */
c->operand[6] = sl; /* system_specific_multiplex selection_length */
/*
* operand[7]: valid_flags[0]
* operand[8]: valid_flags[1]
* operand[7 + sl]: nr_of_dsit_sel_specs (always 0)
*/
clear_operands(c, 7, 24);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = fdtv->type == FIREDTV_DVB_T ? 24 : 28;
ret = avc_write(fdtv);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code? */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
mutex_unlock(&fdtv->avc_mutex);
if (ret == 0)
msleep(250);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_identify_subunit(struct firedtv *fdtv)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
int ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_READ_DESCRIPTOR;
c->operand[0] = DESCRIPTOR_SUBUNIT_IDENTIFIER;
c->operand[1] = 0xff;
c->operand[2] = 0x00;
c->operand[3] = 0x00; /* length highbyte */
c->operand[4] = 0x08; /* length lowbyte */
c->operand[5] = 0x00; /* offset highbyte */
c->operand[6] = 0x0d; /* offset lowbyte */
clear_operands(c, 7, 8); /* padding */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if ((r->response != AVC_RESPONSE_STABLE &&
r->response != AVC_RESPONSE_ACCEPTED) ||
(r->operand[3] << 8) + r->operand[4] != 8) {
dev_err(fdtv->device, "cannot read subunit identifier\n");
ret = -EINVAL;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
out:
mutex_unlock(&fdtv->avc_mutex);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
#define SIZEOF_ANTENNA_INPUT_INFO 22
int avc_tuner_status(struct firedtv *fdtv, struct firedtv_tuner_status *stat)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
int length, ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_READ_DESCRIPTOR;
c->operand[0] = DESCRIPTOR_TUNER_STATUS;
c->operand[1] = 0xff; /* read_result_status */
/*
* operand[2]: reserved
* operand[3]: SIZEOF_ANTENNA_INPUT_INFO >> 8
* operand[4]: SIZEOF_ANTENNA_INPUT_INFO & 0xff
*/
clear_operands(c, 2, 31);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (r->response != AVC_RESPONSE_STABLE &&
r->response != AVC_RESPONSE_ACCEPTED) {
dev_err(fdtv->device, "cannot read tuner status\n");
ret = -EINVAL;
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
length = r->operand[9];
if (r->operand[1] != 0x10 || length != SIZEOF_ANTENNA_INPUT_INFO) {
dev_err(fdtv->device, "got invalid tuner status\n");
ret = -EINVAL;
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
stat->active_system = r->operand[10];
stat->searching = r->operand[11] >> 7 & 1;
stat->moving = r->operand[11] >> 6 & 1;
stat->no_rf = r->operand[11] >> 5 & 1;
stat->input = r->operand[12] >> 7 & 1;
stat->selected_antenna = r->operand[12] & 0x7f;
stat->ber = r->operand[13] << 24 |
r->operand[14] << 16 |
r->operand[15] << 8 |
r->operand[16];
stat->signal_strength = r->operand[17];
stat->raster_frequency = r->operand[18] >> 6 & 2;
stat->rf_frequency = (r->operand[18] & 0x3f) << 16 |
r->operand[19] << 8 |
r->operand[20];
stat->man_dep_info_length = r->operand[21];
stat->front_end_error = r->operand[22] >> 4 & 1;
stat->antenna_error = r->operand[22] >> 3 & 1;
stat->front_end_power_status = r->operand[22] >> 1 & 1;
stat->power_supply = r->operand[22] & 1;
stat->carrier_noise_ratio = r->operand[23] << 8 |
r->operand[24];
stat->power_supply_voltage = r->operand[27];
stat->antenna_voltage = r->operand[28];
stat->firewire_bus_voltage = r->operand[29];
stat->ca_mmi = r->operand[30] & 1;
stat->ca_pmt_reply = r->operand[31] >> 7 & 1;
stat->ca_date_time_request = r->operand[31] >> 6 & 1;
stat->ca_application_info = r->operand[31] >> 5 & 1;
stat->ca_module_present_status = r->operand[31] >> 4 & 1;
stat->ca_dvb_flag = r->operand[31] >> 3 & 1;
stat->ca_error_flag = r->operand[31] >> 2 & 1;
stat->ca_initialization_status = r->operand[31] >> 1 & 1;
out:
mutex_unlock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
char conttone, char nrdiseq,
struct dvb_diseqc_master_cmd *diseqcmd)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
int pos, j, k, ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_LNB_CONTROL;
c->operand[4] = voltage;
c->operand[5] = nrdiseq;
pos = 6;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
for (j = 0; j < nrdiseq; j++) {
c->operand[pos++] = diseqcmd[j].msg_len;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
for (k = 0; k < diseqcmd[j].msg_len; k++)
c->operand[pos++] = diseqcmd[j].msg[k];
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
c->operand[pos++] = burst;
c->operand[pos++] = conttone;
pad_operands(c, pos);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = ALIGN(3 + pos, 4);
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (r->response != AVC_RESPONSE_ACCEPTED) {
dev_err(fdtv->device, "LNB control failed\n");
ret = -EINVAL;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
out:
mutex_unlock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_register_remote_control(struct firedtv *fdtv)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
int ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_NOTIFY;
c->subunit = AVC_SUBUNIT_TYPE_UNIT | 7;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_REGISTER_REMOTE_CONTROL;
c->operand[4] = 0; /* padding */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 8;
ret = avc_write(fdtv);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code? */
mutex_unlock(&fdtv->avc_mutex);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
void avc_remote_ctrl_work(struct work_struct *work)
{
struct firedtv *fdtv =
container_of(work, struct firedtv, remote_ctrl_work);
/* Should it be rescheduled in failure cases? */
avc_register_remote_control(fdtv);
}
#if 0 /* FIXME: unused */
int avc_tuner_host2ca(struct firedtv *fdtv)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
int ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
clear_operands(c, 6, 8);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code? */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
mutex_unlock(&fdtv->avc_mutex);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
#endif
static int get_ca_object_pos(struct avc_response_frame *r)
{
int length = 1;
/* Check length of length field */
if (r->operand[7] & 0x80)
length = (r->operand[7] & 0x7f) + 1;
return length + 7;
}
static int get_ca_object_length(struct avc_response_frame *r)
{
#if 0 /* FIXME: unused */
int size = 0;
int i;
if (r->operand[7] & 0x80)
for (i = 0; i < (r->operand[7] & 0x7f); i++) {
size <<= 8;
size += r->operand[8 + i];
}
#endif
return r->operand[7];
}
int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
int pos, ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
clear_operands(c, 6, LAST_OPERAND);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code and validate response data */
pos = get_ca_object_pos(r);
app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff;
app_info[2] = (EN50221_TAG_APP_INFO >> 0) & 0xff;
app_info[3] = 6 + r->operand[pos + 4];
app_info[4] = 0x01;
memcpy(&app_info[5], &r->operand[pos], 5 + r->operand[pos + 4]);
*len = app_info[3] + 4;
out:
mutex_unlock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
int i, pos, ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_APPLICATION_INFO; /* ca tag */
clear_operands(c, 6, LAST_OPERAND);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code and validate response data */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
pos = get_ca_object_pos(r);
app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff;
app_info[2] = (EN50221_TAG_CA_INFO >> 0) & 0xff;
if (num_fake_ca_system_ids == 0) {
app_info[3] = 2;
app_info[4] = r->operand[pos + 0];
app_info[5] = r->operand[pos + 1];
} else {
app_info[3] = num_fake_ca_system_ids * 2;
for (i = 0; i < num_fake_ca_system_ids; i++) {
app_info[4 + i * 2] =
(fake_ca_system_ids[i] >> 8) & 0xff;
app_info[5 + i * 2] = fake_ca_system_ids[i] & 0xff;
}
}
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
*len = app_info[3] + 4;
out:
mutex_unlock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_ca_reset(struct firedtv *fdtv)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
int ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_RESET; /* ca tag */
c->operand[6] = 0; /* more/last */
c->operand[7] = 1; /* length */
c->operand[8] = 0; /* force hardware reset */
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code? */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
mutex_unlock(&fdtv->avc_mutex);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
int list_management;
int program_info_length;
int pmt_cmd_id;
int read_pos;
int write_pos;
int es_info_length;
int crc32_csum;
int ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (unlikely(avc_debug & AVC_DEBUG_APPLICATION_PMT))
debug_pmt(msg, length);
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_CONTROL;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
if (msg[0] != EN50221_LIST_MANAGEMENT_ONLY) {
dev_info(fdtv->device, "forcing list_management to ONLY\n");
msg[0] = EN50221_LIST_MANAGEMENT_ONLY;
}
/* We take the cmd_id from the programme level only! */
list_management = msg[0];
program_info_length = ((msg[4] & 0x0f) << 8) + msg[5];
if (program_info_length > 0)
program_info_length--; /* Remove pmt_cmd_id */
pmt_cmd_id = msg[6];
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */
c->operand[6] = 0; /* more/last */
/* Use three bytes for length field in case length > 127 */
c->operand[10] = list_management;
c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* TS program map table */
c->operand[12] = 0x02; /* Table id=2 */
c->operand[13] = 0x80; /* Section syntax + length */
c->operand[15] = msg[1]; /* Program number */
c->operand[16] = msg[2];
c->operand[17] = msg[3]; /* Version number and current/next */
c->operand[18] = 0x00; /* Section number=0 */
c->operand[19] = 0x00; /* Last section number=0 */
c->operand[20] = 0x1f; /* PCR_PID=1FFF */
c->operand[21] = 0xff;
c->operand[22] = (program_info_length >> 8); /* Program info length */
c->operand[23] = (program_info_length & 0xff);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* CA descriptors at programme level */
read_pos = 6;
write_pos = 24;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (program_info_length > 0) {
pmt_cmd_id = msg[read_pos++];
if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
dev_err(fdtv->device,
"invalid pmt_cmd_id %d\n", pmt_cmd_id);
if (program_info_length > sizeof(c->operand) - 4 - write_pos) {
ret = -EINVAL;
goto out;
}
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
memcpy(&c->operand[write_pos], &msg[read_pos],
program_info_length);
read_pos += program_info_length;
write_pos += program_info_length;
}
while (read_pos < length) {
c->operand[write_pos++] = msg[read_pos++];
c->operand[write_pos++] = msg[read_pos++];
c->operand[write_pos++] = msg[read_pos++];
es_info_length =
((msg[read_pos] & 0x0f) << 8) + msg[read_pos + 1];
read_pos += 2;
if (es_info_length > 0)
es_info_length--; /* Remove pmt_cmd_id */
c->operand[write_pos++] = es_info_length >> 8;
c->operand[write_pos++] = es_info_length & 0xff;
if (es_info_length > 0) {
pmt_cmd_id = msg[read_pos++];
if (pmt_cmd_id != 1 && pmt_cmd_id != 4)
dev_err(fdtv->device, "invalid pmt_cmd_id %d "
"at stream level\n", pmt_cmd_id);
if (es_info_length > sizeof(c->operand) - 4 -
write_pos) {
ret = -EINVAL;
goto out;
}
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
memcpy(&c->operand[write_pos], &msg[read_pos],
es_info_length);
read_pos += es_info_length;
write_pos += es_info_length;
}
}
write_pos += 4; /* CRC */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->operand[7] = 0x82;
c->operand[8] = (write_pos - 10) >> 8;
c->operand[9] = (write_pos - 10) & 0xff;
c->operand[14] = write_pos - 15;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1);
c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff;
c->operand[write_pos - 3] = (crc32_csum >> 16) & 0xff;
c->operand[write_pos - 2] = (crc32_csum >> 8) & 0xff;
c->operand[write_pos - 1] = (crc32_csum >> 0) & 0xff;
pad_operands(c, write_pos);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = ALIGN(3 + write_pos, 4);
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (r->response != AVC_RESPONSE_ACCEPTED) {
dev_err(fdtv->device,
"CA PMT failed with response 0x%x\n", r->response);
ret = -EACCES;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
out:
mutex_unlock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_ca_get_time_date(struct firedtv *fdtv, int *interval)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
int ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_DATE_TIME; /* ca tag */
clear_operands(c, 6, LAST_OPERAND);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code and validate response data */
*interval = r->operand[get_ca_object_pos(r)];
out:
mutex_unlock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_ca_enter_menu(struct firedtv *fdtv)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
int ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_HOST2CA;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_ENTER_MENU;
clear_operands(c, 6, 8);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code? */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
mutex_unlock(&fdtv->avc_mutex);
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
int avc_ca_get_mmi(struct firedtv *fdtv, char *mmi_object, unsigned int *len)
{
struct avc_command_frame *c = (void *)fdtv->avc_data;
struct avc_response_frame *r = (void *)fdtv->avc_data;
int ret;
mutex_lock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
c->ctype = AVC_CTYPE_STATUS;
c->subunit = AVC_SUBUNIT_TYPE_TUNER | fdtv->subunit;
c->opcode = AVC_OPCODE_VENDOR;
c->operand[0] = SFE_VENDOR_DE_COMPANYID_0;
c->operand[1] = SFE_VENDOR_DE_COMPANYID_1;
c->operand[2] = SFE_VENDOR_DE_COMPANYID_2;
c->operand[3] = SFE_VENDOR_OPCODE_CA2HOST;
c->operand[4] = 0; /* slot */
c->operand[5] = SFE_VENDOR_TAG_CA_MMI;
clear_operands(c, 6, LAST_OPERAND);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
fdtv->avc_data_length = 12;
ret = avc_write(fdtv);
if (ret < 0)
goto out;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: check response code and validate response data */
*len = get_ca_object_length(r);
memcpy(mmi_object, &r->operand[get_ca_object_pos(r)], *len);
out:
mutex_unlock(&fdtv->avc_mutex);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
#define CMP_OUTPUT_PLUG_CONTROL_REG_0 0xfffff0000904ULL
static int cmp_read(struct firedtv *fdtv, u64 addr, __be32 *data)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
int ret;
ret = fdtv_read(fdtv, addr, data);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (ret < 0)
dev_err(fdtv->device, "CMP: read I/O error\n");
return ret;
}
static int cmp_lock(struct firedtv *fdtv, u64 addr, __be32 data[])
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
{
int ret;
ret = fdtv_lock(fdtv, addr, data);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (ret < 0)
dev_err(fdtv->device, "CMP: lock I/O error\n");
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return ret;
}
static inline u32 get_opcr(__be32 opcr, u32 mask, u32 shift)
{
return (be32_to_cpu(opcr) >> shift) & mask;
}
static inline void set_opcr(__be32 *opcr, u32 value, u32 mask, u32 shift)
{
*opcr &= ~cpu_to_be32(mask << shift);
*opcr |= cpu_to_be32((value & mask) << shift);
}
#define get_opcr_online(v) get_opcr((v), 0x1, 31)
#define get_opcr_p2p_connections(v) get_opcr((v), 0x3f, 24)
#define get_opcr_channel(v) get_opcr((v), 0x3f, 16)
#define set_opcr_p2p_connections(p, v) set_opcr((p), (v), 0x3f, 24)
#define set_opcr_channel(p, v) set_opcr((p), (v), 0x3f, 16)
#define set_opcr_data_rate(p, v) set_opcr((p), (v), 0x3, 14)
#define set_opcr_overhead_id(p, v) set_opcr((p), (v), 0xf, 10)
int cmp_establish_pp_connection(struct firedtv *fdtv, int plug, int channel)
{
__be32 old_opcr, opcr[2];
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
int attempts = 0;
int ret;
ret = cmp_read(fdtv, opcr_address, opcr);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (ret < 0)
return ret;
repeat:
if (!get_opcr_online(*opcr)) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
dev_err(fdtv->device, "CMP: output offline\n");
return -EBUSY;
}
old_opcr = *opcr;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (get_opcr_p2p_connections(*opcr)) {
if (get_opcr_channel(*opcr) != channel) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
dev_err(fdtv->device, "CMP: cannot change channel\n");
return -EBUSY;
}
dev_info(fdtv->device, "CMP: overlaying connection\n");
/* We don't allocate isochronous resources. */
} else {
set_opcr_channel(opcr, channel);
set_opcr_data_rate(opcr, 2); /* S400 */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: this is for the worst case - optimize */
set_opcr_overhead_id(opcr, 0);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/* FIXME: allocate isochronous channel and bandwidth at IRM */
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
}
set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) + 1);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
opcr[1] = *opcr;
opcr[0] = old_opcr;
ret = cmp_lock(fdtv, opcr_address, opcr);
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (ret < 0)
return ret;
if (old_opcr != *opcr) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/*
* FIXME: if old_opcr.P2P_Connections > 0,
* deallocate isochronous channel and bandwidth at IRM
*/
if (++attempts < 6) /* arbitrary limit */
goto repeat;
return -EBUSY;
}
return 0;
}
void cmp_break_pp_connection(struct firedtv *fdtv, int plug, int channel)
{
__be32 old_opcr, opcr[2];
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
u64 opcr_address = CMP_OUTPUT_PLUG_CONTROL_REG_0 + (plug << 2);
int attempts = 0;
if (cmp_read(fdtv, opcr_address, opcr) < 0)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return;
repeat:
if (!get_opcr_online(*opcr) || !get_opcr_p2p_connections(*opcr) ||
get_opcr_channel(*opcr) != channel) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
dev_err(fdtv->device, "CMP: no connection to break\n");
return;
}
old_opcr = *opcr;
set_opcr_p2p_connections(opcr, get_opcr_p2p_connections(*opcr) - 1);
opcr[1] = *opcr;
opcr[0] = old_opcr;
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
if (cmp_lock(fdtv, opcr_address, opcr) < 0)
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
return;
if (old_opcr != *opcr) {
firedtv: massive refactoring Combination of the following changes: Mon, 23 Feb 2009 14:21:10 +0100 (CET) firedtv: reinstate debug logging option Henrik Kurelid tells me that FCP debug logging (which I removed during cleanups) is still useful when working on driver issues together with end users. So bring it back in an updated form with only 60% of the original code footprint. Logging can be enabled with # echo -1 > /sys/module/firedtv/parameters/debug 1 instead of -1 enables only FCP header logging, 2 instead of -1 enables only hexdumps of the entire FCP frames. 0 switches logging off again. Fri, 20 Feb 2009 20:54:27 +0100 (CET) firedtv: build fix for INPUT=m and DVB_FIREDTV=y Thu, 19 Feb 2009 20:40:39 +0100 firedtv: use msecs_to_jiffies Pointed out by Mauro Carvalho Chehab. Sun Feb 15 20:50:46 CET 2009 firedtv: some more housekeeping Fix an old checkpatch warning and a new compiler warning. Sun Feb 15 15:33:17 CET 2009 firedtv: rename a file once more At the moment, about a third of avc.c is specific to FireDTVs rather than generic AV/C code. Rename it to firedtv-avc.c. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: more compact channels backing store Replace struct firedtv_channel { bool active; int pid; } channel[16]; by unsigned long channel_active; u16 channel_pid[16];. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: some simplifications c->active was unnecessarily cleared twice. Also, by marking the channel inactive before the for loop, the loop becomes identical with fdtv_channel_collect(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: remove a bogus loop This loop is unnecessary because - only active channel[].pid's will be sent to the device, - when a channel is activated, its pid is set to dvbdmxfeed->pid. Perhaps the original code was there because it was initially not fully covered by the fdtv->demux_mutex. Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix mutex protection fdtv_start_feed() accessed the channel list unsafely. Fully serialize it with itself and fdtv_stop_feed(). Sun Feb 15 15:33:17 CET 2009 firedtv: dvb demux: fix missing braces Original code was: ... case DMX_TS_PES_OTHER: //Dirty fix to keep firesat->channel pid-list up to date for(k=0;k<16;k++){ if(firesat->channel[k].active == 0) firesat->channel[k].pid = dvbdmxfeed->pid; break; } channel = firesat_channel_allocate(firesat); break; default: ... Looks bogus in several respects. For now let's just add braces to the if because that seems to be what the author meant. Sun Feb 15 15:33:17 CET 2009 firedtv: allow build without input subsystem !CONFIG_INPUT is very unlikely on systems on which firedtv is of interest. But we can easily support it. Sun Feb 15 15:33:17 CET 2009 firedtv: replace EXTRA_CFLAGS by ccflags The former are deprecated. The latter can depend on Kconfig variables. Sun Feb 15 15:33:17 CET 2009 firedtv: concentrate ieee1394 dependencies Move the entire interface with drivers/ieee1394 to firedtv-1394.c. Move 1394-independent module initialization code to firedtv-dvb.c. This prepares interfacing with drivers/firewire. Sun Feb 15 15:33:17 CET 2009 firedtv: amend Kconfig menu prompt Sun Feb 15 15:33:17 CET 2009 firedtv: remove kernel version compatibility macro Sun Feb 15 15:33:17 CET 2009 firedtv: combine header files avc.h and firedtv-*.h are small and currently not shared with other drivers, hence concatenate them all into firedtv.h. Sun Feb 15 15:33:17 CET 2009 firedtv: misc style touch-ups Standardize on lower-case hexadecimal constants. Adjust whitespace. Omit unnecessary pointer type casts and an unnecessary list head initialization. Use dev_printk. Wed Feb 11 21:21:04 CET 2009 firedtv: avc, ci: remove unused constants Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from read descriptor response operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from DSD command operands Don't use bitfields in struct types of on-the-wire data. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: header file cleanup Remove unused constants and declarations. Move privately used constants into .c files. Wed Feb 11 21:21:04 CET 2009 firedtv: avc: remove bitfields from FCP frame types Don't use bitfields in struct types of on-the-wire data. Also move many privately used constants from avc.h to avc.c and remove some unused constants. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: fix offset in avc_tuner_get_ts The parentheses were wrong. It didn't matter though because this code only writes a 0 into an area which is already initialized to 0. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: avc: reduce stack usage, remove two typedefs It is safe to share a memory buffer for command frame and response frame because the response data come in after the command frame was last used. Even less stack would be required if only the actual required frame size instead of the entire FCP register size was allocated. Also, rename the defined types AVCCmdFrm and AVCRspFrm to struct avc_command_frame and struct avc_response_frame. TODO: Remove the bitfields in these types. Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: cmp: move code to avc Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: move code to firedtv-1394 Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: remove unnecessary struct type definitions Sun, 18 Jan 2009 16:30:00 +0100 (CET) firedtv: iso: style changes and fixlets Add cleanup after failure in setup_iso_channel. Replace printk() by dv_err(). Decrease indentation level in rawiso_activity_cb(). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-23 06:21:10 -07:00
/*
* FIXME: if old_opcr.P2P_Connections == 1, i.e. we were last
* owner, deallocate isochronous channel and bandwidth at IRM
* if (...)
* fdtv->backend->dealloc_resources(fdtv, channel, bw);
*/
if (++attempts < 6) /* arbitrary limit */
goto repeat;
}
}