2010-11-09 13:08:05 -07:00
|
|
|
/*
|
|
|
|
* GPL LICENSE SUMMARY
|
|
|
|
*
|
|
|
|
* Copyright(c) 2010 Intel Corporation. All rights reserved.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful, but
|
|
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
|
|
* The full GNU General Public License is included in this distribution
|
|
|
|
* in the file called LICENSE.GPL.
|
|
|
|
*
|
|
|
|
* Contact Information:
|
|
|
|
* Intel Corporation
|
|
|
|
* 2200 Mission College Blvd.
|
|
|
|
* Santa Clara, CA 97052
|
|
|
|
*
|
|
|
|
* This provides access methods for PCI registers that mis-behave on
|
|
|
|
* the CE4100. Each register can be assigned a private init, read and
|
|
|
|
* write routine. The exception to this is the bridge device. The
|
|
|
|
* bridge device is the only device on bus zero (0) that requires any
|
|
|
|
* fixup so it is a special case ATM
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
2011-03-14 03:33:40 -06:00
|
|
|
#include <asm/ce4100.h>
|
2010-11-09 13:08:05 -07:00
|
|
|
#include <asm/pci_x86.h>
|
|
|
|
|
|
|
|
struct sim_reg {
|
|
|
|
u32 value;
|
|
|
|
u32 mask;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct sim_dev_reg {
|
|
|
|
int dev_func;
|
|
|
|
int reg;
|
|
|
|
void (*init)(struct sim_dev_reg *reg);
|
|
|
|
void (*read)(struct sim_dev_reg *reg, u32 *value);
|
|
|
|
void (*write)(struct sim_dev_reg *reg, u32 value);
|
|
|
|
struct sim_reg sim_reg;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct sim_reg_op {
|
|
|
|
void (*init)(struct sim_dev_reg *reg);
|
|
|
|
void (*read)(struct sim_dev_reg *reg, u32 value);
|
|
|
|
void (*write)(struct sim_dev_reg *reg, u32 value);
|
|
|
|
};
|
|
|
|
|
|
|
|
#define MB (1024 * 1024)
|
|
|
|
#define KB (1024)
|
|
|
|
#define SIZE_TO_MASK(size) (~(size - 1))
|
|
|
|
|
|
|
|
#define DEFINE_REG(device, func, offset, size, init_op, read_op, write_op)\
|
|
|
|
{ PCI_DEVFN(device, func), offset, init_op, read_op, write_op,\
|
|
|
|
{0, SIZE_TO_MASK(size)} },
|
|
|
|
|
|
|
|
static void reg_init(struct sim_dev_reg *reg)
|
|
|
|
{
|
|
|
|
pci_direct_conf1.read(0, 1, reg->dev_func, reg->reg, 4,
|
|
|
|
®->sim_reg.value);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void reg_read(struct sim_dev_reg *reg, u32 *value)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&pci_config_lock, flags);
|
|
|
|
*value = reg->sim_reg.value;
|
|
|
|
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void reg_write(struct sim_dev_reg *reg, u32 value)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&pci_config_lock, flags);
|
|
|
|
reg->sim_reg.value = (value & reg->sim_reg.mask) |
|
|
|
|
(reg->sim_reg.value & ~reg->sim_reg.mask);
|
|
|
|
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sata_reg_init(struct sim_dev_reg *reg)
|
|
|
|
{
|
|
|
|
pci_direct_conf1.read(0, 1, PCI_DEVFN(14, 0), 0x10, 4,
|
|
|
|
®->sim_reg.value);
|
|
|
|
reg->sim_reg.value += 0x400;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ehci_reg_read(struct sim_dev_reg *reg, u32 *value)
|
|
|
|
{
|
|
|
|
reg_read(reg, value);
|
|
|
|
if (*value != reg->sim_reg.mask)
|
|
|
|
*value |= 0x100;
|
|
|
|
}
|
|
|
|
|
|
|
|
void sata_revid_init(struct sim_dev_reg *reg)
|
|
|
|
{
|
|
|
|
reg->sim_reg.value = 0x01060100;
|
|
|
|
reg->sim_reg.mask = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sata_revid_read(struct sim_dev_reg *reg, u32 *value)
|
|
|
|
{
|
|
|
|
reg_read(reg, value);
|
|
|
|
}
|
|
|
|
|
2012-10-29 07:40:20 -06:00
|
|
|
static void reg_noirq_read(struct sim_dev_reg *reg, u32 *value)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
raw_spin_lock_irqsave(&pci_config_lock, flags);
|
|
|
|
/* force interrupt pin value to 0 */
|
|
|
|
*value = reg->sim_reg.value & 0xfff00ff;
|
|
|
|
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
|
|
|
|
}
|
|
|
|
|
2010-11-09 13:08:05 -07:00
|
|
|
static struct sim_dev_reg bus1_fixups[] = {
|
|
|
|
DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(6, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(8, 0, 0x10, (1*MB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(8, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(8, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(9, 0, 0x10 , (1*MB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(9, 0, 0x14, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(10, 0, 0x10, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(10, 0, 0x14, (256*MB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 0, 0x10, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 0, 0x14, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 1, 0x10, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 2, 0x10, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 2, 0x14, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 2, 0x18, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 3, 0x10, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 3, 0x14, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 4, 0x10, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
2012-10-29 07:40:20 -06:00
|
|
|
DEFINE_REG(11, 7, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
|
2010-11-09 13:08:05 -07:00
|
|
|
DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(13, 0, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write)
|
|
|
|
DEFINE_REG(13, 1, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write)
|
|
|
|
DEFINE_REG(14, 0, 0x8, 0, sata_revid_init, sata_revid_read, 0)
|
|
|
|
DEFINE_REG(14, 0, 0x10, 0, reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(14, 0, 0x14, 0, reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(14, 0, 0x18, 0, reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(14, 0, 0x1C, 0, reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(14, 0, 0x20, 0, reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(14, 0, 0x24, (0x200), sata_reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(15, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(15, 0, 0x14, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
|
2012-10-29 07:40:20 -06:00
|
|
|
DEFINE_REG(16, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
|
2010-11-09 13:08:05 -07:00
|
|
|
DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
|
|
|
|
DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
|
2012-10-29 07:40:20 -06:00
|
|
|
DEFINE_REG(18, 0, 0x3c, 256, reg_init, reg_noirq_read, reg_write)
|
2010-11-09 13:08:05 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
static void __init init_sim_regs(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
|
|
|
|
if (bus1_fixups[i].init)
|
|
|
|
bus1_fixups[i].init(&bus1_fixups[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void extract_bytes(u32 *value, int reg, int len)
|
|
|
|
{
|
|
|
|
uint32_t mask;
|
|
|
|
|
|
|
|
*value >>= ((reg & 3) * 8);
|
|
|
|
mask = 0xFFFFFFFF >> ((4 - len) * 8);
|
|
|
|
*value &= mask;
|
|
|
|
}
|
|
|
|
|
|
|
|
int bridge_read(unsigned int devfn, int reg, int len, u32 *value)
|
|
|
|
{
|
|
|
|
u32 av_bridge_base, av_bridge_limit;
|
|
|
|
int retval = 0;
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
/* Make BARs appear to not request any memory. */
|
|
|
|
case PCI_BASE_ADDRESS_0:
|
|
|
|
case PCI_BASE_ADDRESS_0 + 1:
|
|
|
|
case PCI_BASE_ADDRESS_0 + 2:
|
|
|
|
case PCI_BASE_ADDRESS_0 + 3:
|
|
|
|
*value = 0;
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* Since subordinate bus number register is hardwired
|
|
|
|
* to zero and read only, so do the simulation.
|
|
|
|
*/
|
|
|
|
case PCI_PRIMARY_BUS:
|
|
|
|
if (len == 4)
|
|
|
|
*value = 0x00010100;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PCI_SUBORDINATE_BUS:
|
|
|
|
*value = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case PCI_MEMORY_BASE:
|
|
|
|
case PCI_MEMORY_LIMIT:
|
|
|
|
/* Get the A/V bridge base address. */
|
|
|
|
pci_direct_conf1.read(0, 0, devfn,
|
|
|
|
PCI_BASE_ADDRESS_0, 4, &av_bridge_base);
|
|
|
|
|
|
|
|
av_bridge_limit = av_bridge_base + (512*MB - 1);
|
|
|
|
av_bridge_limit >>= 16;
|
|
|
|
av_bridge_limit &= 0xFFF0;
|
|
|
|
|
|
|
|
av_bridge_base >>= 16;
|
|
|
|
av_bridge_base &= 0xFFF0;
|
|
|
|
|
|
|
|
if (reg == PCI_MEMORY_LIMIT)
|
|
|
|
*value = av_bridge_limit;
|
|
|
|
else if (len == 2)
|
|
|
|
*value = av_bridge_base;
|
|
|
|
else
|
|
|
|
*value = (av_bridge_limit << 16) | av_bridge_base;
|
|
|
|
break;
|
|
|
|
/* Make prefetchable memory limit smaller than prefetchable
|
|
|
|
* memory base, so not claim prefetchable memory space.
|
|
|
|
*/
|
|
|
|
case PCI_PREF_MEMORY_BASE:
|
|
|
|
*value = 0xFFF0;
|
|
|
|
break;
|
|
|
|
case PCI_PREF_MEMORY_LIMIT:
|
|
|
|
*value = 0x0;
|
|
|
|
break;
|
|
|
|
/* Make IO limit smaller than IO base, so not claim IO space. */
|
|
|
|
case PCI_IO_BASE:
|
|
|
|
*value = 0xF0;
|
|
|
|
break;
|
|
|
|
case PCI_IO_LIMIT:
|
|
|
|
*value = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
retval = 1;
|
|
|
|
}
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ce4100_conf_read(unsigned int seg, unsigned int bus,
|
|
|
|
unsigned int devfn, int reg, int len, u32 *value)
|
|
|
|
{
|
2010-12-17 08:33:53 -07:00
|
|
|
int i;
|
2010-11-09 13:08:05 -07:00
|
|
|
|
x86/PCI: config space accessor functions should not ignore the segment argument
Without this change, the majority of the raw PCI config space access
functions silently ignore a non-zero segment argument, which is
certainly wrong.
Apart from pci_direct_conf1, all other non-MMCFG access methods get
used only for non-extended accesses (i.e. assigned to raw_pci_ops
only). Consequently, with the way raw_pci_{read,write}() work, it would
be a coding error to call these functions with a non-zero segment (with
the current call flow this cannot happen afaict).
The access method 1 accessor, as it can be used for extended accesses
(on AMD systems) instead gets checks added for the passed in segment to
be zero. This would be the case when on such a system having multiple
PCI segments (don't know whether any exist in practice) MMCFG for some
reason is not usable, and method 1 gets selected for doing extended
accesses. Rather than accessing the wrong device's config space, the
function will now error out.
v2: Convert BUG_ON() to WARN_ON(), and extend description as per Ingo's
request.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 01:13:05 -06:00
|
|
|
WARN_ON(seg);
|
2010-11-09 13:08:05 -07:00
|
|
|
if (bus == 1) {
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
|
|
|
|
if (bus1_fixups[i].dev_func == devfn &&
|
|
|
|
bus1_fixups[i].reg == (reg & ~3) &&
|
|
|
|
bus1_fixups[i].read) {
|
|
|
|
bus1_fixups[i].read(&(bus1_fixups[i]),
|
|
|
|
value);
|
|
|
|
extract_bytes(value, reg, len);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (bus == 0 && (PCI_DEVFN(1, 0) == devfn) &&
|
|
|
|
!bridge_read(devfn, reg, len, value))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ce4100_conf_write(unsigned int seg, unsigned int bus,
|
|
|
|
unsigned int devfn, int reg, int len, u32 value)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
x86/PCI: config space accessor functions should not ignore the segment argument
Without this change, the majority of the raw PCI config space access
functions silently ignore a non-zero segment argument, which is
certainly wrong.
Apart from pci_direct_conf1, all other non-MMCFG access methods get
used only for non-extended accesses (i.e. assigned to raw_pci_ops
only). Consequently, with the way raw_pci_{read,write}() work, it would
be a coding error to call these functions with a non-zero segment (with
the current call flow this cannot happen afaict).
The access method 1 accessor, as it can be used for extended accesses
(on AMD systems) instead gets checks added for the passed in segment to
be zero. This would be the case when on such a system having multiple
PCI segments (don't know whether any exist in practice) MMCFG for some
reason is not usable, and method 1 gets selected for doing extended
accesses. Rather than accessing the wrong device's config space, the
function will now error out.
v2: Convert BUG_ON() to WARN_ON(), and extend description as per Ingo's
request.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-07-22 01:13:05 -06:00
|
|
|
WARN_ON(seg);
|
2010-11-09 13:08:05 -07:00
|
|
|
if (bus == 1) {
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
|
|
|
|
if (bus1_fixups[i].dev_func == devfn &&
|
|
|
|
bus1_fixups[i].reg == (reg & ~3) &&
|
|
|
|
bus1_fixups[i].write) {
|
|
|
|
bus1_fixups[i].write(&(bus1_fixups[i]),
|
|
|
|
value);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Discard writes to A/V bridge BAR. */
|
|
|
|
if (bus == 0 && PCI_DEVFN(1, 0) == devfn &&
|
|
|
|
((reg & ~3) == PCI_BASE_ADDRESS_0))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
|
|
|
|
}
|
|
|
|
|
2011-09-15 01:58:51 -06:00
|
|
|
static const struct pci_raw_ops ce4100_pci_conf = {
|
2010-11-09 13:08:05 -07:00
|
|
|
.read = ce4100_conf_read,
|
|
|
|
.write = ce4100_conf_write,
|
|
|
|
};
|
|
|
|
|
2011-03-14 03:33:40 -06:00
|
|
|
int __init ce4100_pci_init(void)
|
2010-11-09 13:08:05 -07:00
|
|
|
{
|
|
|
|
init_sim_regs();
|
|
|
|
raw_pci_ops = &ce4100_pci_conf;
|
2011-03-14 03:33:40 -06:00
|
|
|
/* Indicate caller that it should invoke pci_legacy_init() */
|
|
|
|
return 1;
|
2010-11-09 13:08:05 -07:00
|
|
|
}
|