1
0
Fork 0
alistair23-linux/arch/arm/boot/dts/rk3288-vyasa.dts

472 lines
9.8 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2017 Jagan Teki <jagan@amarulasolutions.com>
*/
/dts-v1/;
#include "rk3288.dtsi"
/ {
model = "Amarula Vyasa-RK3288";
compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
chosen {
stdout-path = &uart2;
};
memory {
reg = <0x0 0x0 0x0 0x80000000>;
device_type = "memory";
};
dc12_vbat: dc12-vbat {
compatible = "regulator-fixed";
regulator-name = "dc12_vbat";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
regulator-boot-on;
};
vboot_3v3: vboot-3v3 {
compatible = "regulator-fixed";
regulator-name = "vboot_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&dc12_vbat>;
};
vcc_sys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&dc12_vbat>;
};
vboot_5v: vboot-5v {
compatible = "regulator-fixed";
regulator-name = "vboot_sv";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&dc12_vbat>;
};
v3g_3v3: v3g-3v3 {
compatible = "regulator-fixed";
regulator-name = "v3g_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&dc12_vbat>;
};
vsus_5v: vsus-5v {
compatible = "regulator-fixed";
regulator-name = "vsus_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vcc_io>;
};
vusb1_5v: vusb1-5v {
compatible = "regulator-fixed";
regulator-name = "vusb1_5v";
enable-active-high;
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; /* OTG_VBUS_DRV */
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vsus_5v>;
};
vusb2_5v: vusb2-5v {
compatible = "regulator-fixed";
regulator-name = "vusb2_5v";
enable-active-high;
gpio = <&gpio8 RK_PB1 GPIO_ACTIVE_HIGH>; /* USB2_PWR_EN */
pinctrl-names = "default";
pinctrl-0 = <&usb2_pwr_en>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vsus_5v>;
};
ext_gmac: external-gmac-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <125000000>;
clock-output-names = "ext_gmac";
};
};
&cpu0 {
cpu0-supply = <&vdd_cpu>;
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
vmmc-supply = <&vcc_io>;
status = "okay";
};
&gmac {
assigned-clocks = <&cru SCLK_MAC>;
assigned-clock-parents = <&ext_gmac>;
clock_in_out = "input";
pinctrl-names = "default";
pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
phy-supply = <&vcc_lan>;
phy-mode = "rgmii";
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
tx_delay = <0x30>;
rx_delay = <0x10>;
status = "okay";
};
&gpu {
mali-supply = <&vdd_gpu>;
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc6-supply = <&vcc_sys>;
vcc7-supply = <&vcc_sys>;
vcc8-supply = <&vcc_io>;
vcc9-supply = <&vcc_sys>;
vcc10-supply = <&vcc_sys>;
vcc11-supply = <&vcc_sys>;
vcc12-supply = <&vcc_io>;
regulators {
vdd_cpu: DCDC_REG1 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_io: DCDC_REG4 {
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_tp: LDO_REG1 {
regulator-name = "vcc_tp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc_codec: LDO_REG2 {
regulator-name = "vcc_codec";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_10: LDO_REG3 {
regulator-name = "vdd_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
vcc_gps: LDO_REG4 {
regulator-name = "vcc_gps";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vccio_sd: LDO_REG5 {
regulator-name = "vccio_sd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcc10_lcd: LDO_REG6 {
regulator-name = "vcc10_lcd";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_18: LDO_REG7 {
regulator-name = "vcc_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc18_lcd: LDO_REG8 {
regulator-name = "vcc18_lcd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sd: SWITCH_REG1 {
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_lan: SWITCH_REG2 {
regulator-name = "vcc_lan";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
};
};
};
&i2c2 {
status = "okay";
};
&io_domains {
status = "okay";
audio-supply = <&vcc_18>;
bb-supply = <&vcc_io>;
dvp-supply = <&vcc_io>;
flash0-suuply = <&vcc_18>;
flash1-supply = <&vcc_lan>;
gpio30-supply = <&vcc_io>;
gpio1830 = <&vcc_io>;
lcdc-supply = <&vcc_io>;
sdcard-supply = <&vccio_sd>;
wifi-supply = <&vcc_18>;
};
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
card-detect-delay = <200>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
vmmc-supply = <&vcc_sd>;
vqmmc-supply = <&vccio_sd>;
status = "okay";
};
&tsadc {
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
status = "okay";
};
&uart2 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host1 {
pinctrl-names = "default";
pinctrl-0 = <&phy_pwr_en>;
status = "okay";
};
&usb_otg {
status = "okay";
};
&vopb {
status = "okay";
};
&vopb_mmu {
status = "okay";
};
&vopl {
status = "okay";
};
&vopl_mmu {
status = "okay";
};
&wdt {
status = "okay";
};
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
gmac {
phy_int: phy-int {
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_pmeb: phy-pmeb {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
};
phy_rst: phy-rst {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
pmic {
pmic_int: pmic-int {
ARM: dts: rockchip: bulk convert gpios to their constant counterparts Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-02 06:08:57 -06:00
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
usb_host {
phy_pwr_en: phy-pwr-en {
ARM: dts: rockchip: bulk convert gpios to their constant counterparts Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-02 06:08:57 -06:00
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>;
};
usb2_pwr_en: usb2-pwr-en {
rockchip,pins = <8 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb_otg {
otg_vbus_drv: otg-vbus-drv {
ARM: dts: rockchip: bulk convert gpios to their constant counterparts Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-02 06:08:57 -06:00
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};